J. Lee, Q. Zhang, T. Emrick, and A. J. Crosby, Nanoparticle Alignment and Repulsion during Failure of Glassy Polymer Nanocomposites, Macromolecules, vol.39, issue.21, pp.7392-7396, 2006.

A. J. Crosby and J. Lee, Polymer Nanocomposites: The ?Nano? Effect on Mechanical Properties, Polymer Reviews, vol.47, issue.2, pp.217-229, 2007.

K. Niihara, A. Nakahira, and T. Sekino, New Nanocomposite Structural Ceramics, MRS Proceedings, vol.286, 1992.

S. Veprek and A. S. Argon, Mechanical properties of superhard nanocomposites, Surface and Coatings Technology, vol.146-147, pp.175-182, 2001.

V. Provenzano and R. L. Holtz, Nanocomposites for high temperature applications, Materials Science and Engineering: A, vol.204, issue.1-2, pp.125-134, 1995.

B. Cantor, C. M. Allen, R. Dunin-burkowski, M. H. Green, J. L. Hutchinson et al., Applications of nanocomposites, Scripta Materialia, vol.44, issue.8-9, pp.2055-2059, 2001.

A. I. Gusev, Effects of the nanocrystalline state in solids, Physics-Uspekhi, vol.41, issue.1, pp.49-76, 1998.

L. Maya, W. R. Allen, A. L. Glover, and J. C. Mabon, Gold nanocomposites, Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, vol.13, issue.2, p.361, 1995.

T. Onishi, E. Iwamura, K. Takagi, and K. Yoshikawa, Influence of adding transition metal elements to an aluminum target on electrical resistivity and hillock resistance in sputter?deposited aluminum alloy thin films, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.14, issue.5, pp.2728-2735, 1996.

G. Zhao, Q. Zhang, Z. Zheng, Y. Zhang, and B. Yan, The effect of interfacial diffusion on the electrical resistivity of magnetron sputtered Al?Fe?Sn alloy thin film, Physica B: Condensed Matter, vol.484, pp.48-52, 2016.

Y. S. Li, S. Shimada, H. Kiyono, and A. Hirose, Synthesis of Ti?Al?Si?N nanocomposite films using liquid injection PECVD from alkoxide precursors, Acta Materialia, vol.54, issue.8, pp.2041-2048, 2006.

Y. S. Li and S. S. Shimada, Synthesis of anticorrosion SiC and SiNx films from alkoxide solution using liquid injection PECVD, Surface and Coatings Technology, vol.201, issue.3-4, pp.1160-1165, 2006.

Y. S. Li and S. Shimada, Preparation and Corrosion Resistance of Amorphous SiNx Films from Hexamethyldisiloxane Solution by PECVD, Journal of the American Ceramic Society, vol.88, issue.10, pp.2966-2969, 2005.

V. Stathopoulos, V. Sadykov, S. Pavlova, Y. Bespalko, Y. Fedorova et al., Design of functionally graded multilayer thermal barrier coatings for gas turbine application, Surface and Coatings Technology, vol.295, pp.20-28, 2016.

S. N. Grigoriev, V. Y. Fominski, R. I. Romanov, M. A. Volosova, and A. V. Shelyakov, Pulsed laser deposition of nanocomposite MoSex/Mo thin-film catalysts for hydrogen evolution reaction, Thin Solid Films, vol.592, pp.175-181, 2015.

D. Kiesler, T. Bastuck, M. K. Kennedy, and F. E. Kruis, Development of a high flow rate aerodynamic lens system for inclusion of nanoparticles into growing PVD films to form nanocomposite thin films, Aerosol Science and Technology, vol.53, issue.6, pp.630-646, 2019.

D. Frari, D. Bour, J. Bardon, J. Buchheit, O. Arnoult et al., Hybrid layers deposited by an atmospheric pressure plasma process for corrosion protection of galvanized steel, Journal of Nanoscience and Nanotechnology, vol.10, pp.2611-2619, 2010.

T. P. Chou, C. Chandrasekaran, and G. Z. Cao, Journal of Sol-Gel Science and Technology, vol.26, issue.1/3, pp.321-327, 2003.

C. J. Brinker, A. J. Hurd, P. R. Schunk, G. C. Frye, and C. S. Ashley, Review of sol-gel thin film formation, Journal of Non-Crystalline Solids, vol.147-148, pp.424-436, 1992.

H. Dislich and H. Dislich, Glassy and crystalline systems from gels: Chemical basis and technical application, Journal of Non-Crystalline Solids, vol.57, issue.3, pp.371-388, 1983.

D. L. Segal, D. Segal, and L. , Sol-gel processing: Routes to oxide ceramics using colloidal dispersions of hydrous oxides and alkoxide intermediates, Journal of Non-Crystalline Solids, vol.63, issue.1-2, pp.183-191, 1984.

C. J. Brinker and G. W. Scherer, Gelation, Sol-Gel Science, pp.302-355, 1990.

A. C. Pierre, Zuber, Pierre-Alain, Pierre Alain C, vol.1, 2011.

L. L. Hench and J. K. West, The sol-gel process, Chemical Reviews, vol.90, issue.1, pp.33-72, 1990.

A. B. Wojcik and L. C. Klein, Transparent Organic/Inorganic Hybrid Gels: A Classification Scheme, Applied Organometallic Chemistry, vol.11, issue.2, pp.129-135, 1997.

C. Sanchez, G. J. Soler-illia, F. Ribot, T. Lalot, C. R. Mayer et al., Designed Hybrid Organic?Inorganic Nanocomposites from Functional Nanobuilding Blocks, Chemistry of Materials, vol.13, issue.10, pp.3061-3083, 2001.
URL : https://hal.archives-ouvertes.fr/hal-02435873

J. D. Wright and N. A. Sommerdijk, Sol-Gel Materials, 2018.

S. Peng, W. Zhao, H. Li, Z. Zeng, Q. Xue et al., The enhancement of benzotriazole on epoxy functionalized silica sol?gel coating for copper protection, Applied Surface Science, vol.276, pp.284-290, 2013.

R. B. Figueira, C. J. Silva, E. V. Pereira, and M. Manuela-salta, Ureasilicate Hybrid Coatings for Corrosion Protection of Galvanized Steel in Cementitious Media, Journal of The Electrochemical Society, vol.160, issue.10, pp.C467-C479, 2013.

J. H. Osborne and J. H. Osborne, Observations on chromate conversion coatings from a sol?gel perspective, Progress in Organic Coatings, vol.41, issue.4, pp.280-286, 2001.

T. P. Chou, C. Chandrasekaran, S. J. Limmer, S. Seraji, Y. Wu et al., Organic?inorganic hybrid coatings for corrosion protection, Journal of Non-Crystalline Solids, vol.290, issue.2-3, pp.153-162, 2001.

S. A. Kumar, M. Alagar, and V. Mohan, Studies on Corrosion-Resistant Behavior of Siliconized Epoxy Interpenetrating Coatings over Mild Steel Surface by Electrochemical Methods, Journal of Materials Engineering and Performance, vol.11, issue.2, pp.123-129, 2002.

L. Mascia, L. Prezzi, G. D. Wilcox, and M. Lavorgna, Molybdate doping of networks in epoxy?silica hybrids: Domain structuring and corrosion inhibition, Progress in Organic Coatings, vol.56, issue.1, pp.13-22, 2006.

H. Wang and R. Akid, Encapsulated cerium nitrate inhibitors to provide high-performance anti-corrosion sol?gel coatings on mild steel, Corrosion Science, vol.50, issue.4, pp.1142-1148, 2008.

T. L. Metroke, J. S. Gandhi, and A. Apblett, Corrosion resistance properties of Ormosil coatings on 2024-T3 aluminum alloy, Progress in Organic Coatings, vol.50, issue.4, pp.231-246, 2004.

A. N. Khramov, V. N. Balbyshev, L. S. Kasten, and R. A. Mantz, Sol?gel coatings with phosphonate functionalities for surface modification of magnesium alloys, Thin Solid Films, vol.514, issue.1-2, pp.174-181, 2006.

R. Figueira, I. Fontinha, C. Silva, and E. Pereira, Hybrid Sol-Gel Coatings: Smart and Green Materials for Corrosion Mitigation, Coatings, vol.6, issue.1, p.12, 2016.

U. Tiringer, A. Durán, Y. Castro, and I. Milo?ev, Self-Healing Effect of Hybrid Sol-Gel Coatings Based on GPTMS, TEOS, SiO2Nanoparticles and Ce(NO3)3Applied on Aluminum Alloy 7075-T6, Journal of The Electrochemical Society, vol.165, issue.5, pp.C213-C225, 2018.

C. F. Powell, J. H. Oxley, J. M. Blocher, and J. Klerer, Vapor Deposition, Journal of The Electrochemical Society, vol.113, issue.10, p.266C, 1966.

W. D. Westwood, Sputter Deposition Processes, MRS Bulletin, vol.13, issue.12, pp.46-51, 1988.

O. Kluth, G. Schöpe, J. Hüpkes, C. Agashe, J. Müller et al., Modified Thornton model for magnetron sputtered zinc oxide: film structure and etching behaviour, Thin Solid Films, vol.442, issue.1-2, pp.80-85, 2003.

S. R. Droes, T. T. Kodas, and M. J. Hampden-smith, Plasma-Enhanced Chemical Vapor Deposition (PECVD), Carbide, Nitride and Boride Materials Synthesis and Processing, pp.579-603, 1997.

J. Patscheider, Nanocomposite Hard Coatings for Wear Protection, MRS Bulletin, vol.28, issue.3, pp.180-183, 2003.

X. Zhang, J. Jiang, Z. Yuqiao, J. Lin, F. Wang et al., Effect of carbon on TiAlCN coatings deposited by reactive magnetron sputtering, Surface and Coatings Technology, vol.203, issue.5-7, pp.594-597, 2008.

T. Zehnder and J. Patscheider, Nanocomposite TiC/a?C:H hard coatings deposited by reactive PVD, Surface and Coatings Technology, vol.133-134, pp.138-144, 2000.

S. Zhang, X. L. Bui, and Y. Fu, Magnetron-sputtered nc-TiC/a-C(Al) tough nanocomposite coatings, Thin Solid Films, vol.467, issue.1-2, pp.261-266, 2004.

S. Veprek, A. S. Argon, and R. F. Zhang, Origin of the hardness enhancement in superhard nc-TiN/a-Si3N4and ultrahard nc-TiN/a-Si3N4/TiSi2nanocomposites, Philosophical Magazine Letters, vol.87, issue.12, pp.955-966, 2007.

M. C. Joseph, C. Tsotsos, M. A. Baker, P. J. Kench, C. Rebholz et al., Characterisation and tribological evaluation of nitrogen-containing molybdenum?copper PVD metallic nanocomposite films, Surface and Coatings Technology, vol.190, issue.2-3, pp.345-356, 2005.

M. Audronis, A. Leyland, P. J. Kelly, and A. Matthews, Composition and structure-property relationships of chromium-diboride/molybdenum-disulphide PVD nanocomposite hard coatings deposited by pulsed magnetron sputtering, Applied Physics A, vol.91, issue.1, pp.77-86, 2007.

M. S. Ahmed, P. Munroe, Z. Jiang, X. Zhao, W. Rickard et al., Corrosion behaviour of nanocomposite TiSiN coatings on steel substrates, Corrosion Science, vol.53, issue.11, pp.3678-3687, 2011.

K. Lukaszkowicz, L. A., and J. Sondor, Microstructure, Mechanical Properties and Corrosion Resistance of Nanocomposite Coatings Deposited by PVD Technology, Advances in Diverse Industrial Applications of Nanocomposites, 2011.

H. C. Barshilia, B. Deepthi, and K. S. Rajam, Deposition and characterization of TiAlN/Si3N4 superhard nanocomposite coatings prepared by reactive direct current unbalanced magnetron sputtering, Vacuum, vol.81, issue.4, pp.479-488, 2006.

L. Yu, H. Zhao, and J. Xu, Mechanical, tribological and corrosion performance of WBN composite films deposited by reactive magnetron sputtering, Applied Surface Science, vol.315, pp.380-386, 2014.

L. Boufendi, A. Bouchoule, and T. Hbid, Electrical characterization and modeling of a dust forming plasma in a radio frequency discharge, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.14, issue.2, pp.572-576, 1996.

A. Bouchoule, A. Plain, L. Boufendi, J. P. Blondeau, and C. Laure, Particle generation and behavior in a silane?argon low?pressure discharge under continuous or pulsed radio?frequency excitation, Journal of Applied Physics, vol.70, issue.4, pp.1991-2000, 1991.

P. R. I-cabarrocas, A. F. I-morral, S. Lebib, and Y. Poissant, Plasma production of nanocrystalline silicon particles and polymorphous silicon thin films for large-area electronic devices, Pure and Applied Chemistry, vol.74, issue.3, pp.359-367, 2002.

W. J. Yang, Y. Choa, T. Sekino, K. B. Shim, K. Niihara et al., Structural characteristics of diamond-like nanocomposite films grown by PECVD, Materials Letters, vol.57, issue.21, pp.3305-3310, 2003.

T. S. Santra, C. H. Liu, T. K. Bhattacharyya, P. Patel, and T. K. Barik, Characterization of diamond-like nanocomposite thin films grown by plasma enhanced chemical vapor deposition, Journal of Applied Physics, vol.107, issue.12, p.124320, 2010.

M. Cloutier, S. Turgeon, Y. Busby, M. Tatoulian, J. Pireaux et al., Controlled Distribution and Clustering of Silver in Ag-DLC Nanocomposite Coatings Using a Hybrid Plasma Approach, ACS Applied Materials & Interfaces, vol.8, issue.32, pp.21020-21027, 2016.

M. Venkatesh, S. Taktak, and E. I. Meletis, Synthesis of Ag-doped hydrogenated carbon thin films by a hybrid PVD?PECVD deposition process, Bulletin of Materials Science, vol.37, issue.7, pp.1669-1676, 2014.

Y. J. Jo, T. F. Zhang, M. J. Son, and K. H. Kim, Synthesis and electrochemical properties of Ti-doped DLC films by a hybrid PVD/PECVD process, Applied Surface Science, vol.433, pp.1184-1191, 2018.

S. Hao, B. Delley, S. Veprek, and C. Stampfl, Superhard Nitride-Based Nanocomposites: Role of Interfaces and Effect of Impurities, Physical Review Letters, vol.97, issue.8, p.86102, 2006.

F. Vaz, L. Rebouta, P. Goudeau, J. Pacaud, H. Garem et al., Characterisation of Ti1?xSixNy nanocomposite films, Surface and Coatings Technology, vol.133-134, pp.307-313, 2000.

Y. H. Cheng, T. Browne, B. Heckerman, and E. I. Meletis, Mechanical and tribological properties of nanocomposite TiSiN coatings, Surface and Coatings Technology, vol.204, issue.14, pp.2123-2129, 2010.

J. Bardon, J. Bour, D. Del-frari, C. Arnoult, and D. Ruch, Dispersion of Cerium-Based Nanoparticles in an Organosilicon Plasma Polymerized Coating: Effect on Corrosion Protection, Plasma Processes and Polymers, vol.6, issue.S1, pp.S655-S659, 2009.

F. Fanelli, A. M. Mastrangelo, and F. Fracassi, Aerosol-Assisted Atmospheric Cold Plasma Deposition and Characterization of Superhydrophobic Organic?Inorganic Nanocomposite Thin Films, Langmuir, vol.30, issue.3, pp.857-865, 2014.

W. Siemens and . Ozonisator-poggendorffs, Ueber die elektrostatische Induction und die Verzögerung des Stroms in Flaschendrähten, Wissenschaftliche und Technische Arbeiten, vol.102, pp.82-127, 1889.

F. Massines and G. Gouda, A comparison of polypropylene-surface treatment by filamentary, homogeneous and glow discharges in helium at atmospheric pressure, Journal of Physics D: Applied Physics, vol.31, issue.24, pp.3411-3420, 1998.

F. Massines, G. Gouda, N. Gherardi, M. Duran, and E. Croquesel, The role of dielectric barrier discharge atmosphere and physics on polypropylene surface treatment, Plasmas and Polymers, vol.6, issue.1/2, pp.35-49, 2001.

N. Gherardi, S. Martin, and F. Massines, A new approach to SiO2 deposit using a N2-SiH4-N2O glow dielectric barrier-controlled discharge at atmospheric pressure, Journal of Physics D: Applied Physics, vol.33, issue.19, pp.L104-L108, 2000.

S. Martin, F. Massines, N. Gherardi, and C. Jimenez, Atmospheric pressure PE-CVD of silicon based coatings using a glow dielectric barrier discharge, Surface and Coatings Technology, vol.177-178, pp.693-698, 2004.

F. Massines, N. Gherardi, A. Fornelli, and S. Martin, Atmospheric pressure plasma deposition of thin films by Townsend dielectric barrier discharge, Surface and Coatings Technology, vol.200, issue.5-6, pp.1855-1861, 2005.

U. Kogelschatz, Plasma Chemistry and Plasma Processing, vol.23, issue.1, pp.1-46, 2003.

A. Fridman, A. Chirokov, and A. Gutsol, Non-thermal atmospheric pressure discharges, Journal of Physics D: Applied Physics, vol.38, issue.2, pp.R1-R24, 2005.

A. Chirokov, A. Gutsol, and A. Fridman, Atmospheric pressure plasma of dielectric barrier discharges, Pure and Applied Chemistry, vol.77, issue.2, pp.487-495, 2005.

H. Wagner, R. Brandenburg, K. V. Kozlov, A. Sonnenfeld, P. Michel et al., The barrier discharge: basic properties and applications to surface treatment, Vacuum, vol.71, issue.3, pp.417-436, 2003.

K. H. Becker, U. Kogelschatz, K. H. Schoenbach, and R. J. Barker, Non-Equilibrium Air Plasmas at Atmospheric Pressure, 2004.

R. Bartnikas, Note on ac Discharges between Metallic?Dielectric Electrodes in Helium, Journal of Applied Physics, vol.40, issue.4, pp.1974-1976, 1969.

S. Kanazawa, M. Kogoma, T. Moriwaki, and S. Okazaki, Stable glow plasma at atmospheric pressure, Journal of Physics D: Applied Physics, vol.21, issue.5, pp.838-840, 1988.

F. Massines, A. Rabehi, P. Decomps, R. B. Gadri, P. Ségur et al., Experimental and theoretical study of a glow discharge at atmospheric pressure controlled by dielectric barrier, Journal of Applied Physics, vol.83, issue.6, pp.2950-2957, 1998.

D. Trunec, A. Brablec, and F. ??astný, Experimental Study of Atmospheric Pressure Glow Discharge, Contributions to Plasma Physics, vol.38, issue.3, pp.435-445, 1998.

S. Okazaki, M. Kogoma, M. Uehara, and Y. Kimura, Appearance of stable glow discharge in air, argon, oxygen and nitrogen at atmospheric pressure using a 50 Hz source, Journal of Physics D: Applied Physics, vol.26, issue.5, pp.889-892, 1993.

K. Buss, Die elektrodenlose Entladung nach Messung mit dem Kathodenoszillographen, Archiv für Elektrotechnik, vol.26, issue.4, pp.261-265, 1932.

T. Yokoyama, M. Kogoma, T. Moriwaki, and S. Okazaki, The mechanism of the stabilisation of glow plasma at atmospheric pressure, Journal of Physics D: Applied Physics, vol.23, issue.8, pp.1125-1128, 1990.

N. Gherardi, G. Gouda, E. Gat, A. Ricard, and F. A. Massines, Transition from glow silent discharge to micro-discharges in nitrogen gas, Plasma Sources Science and Technology, vol.9, issue.3, pp.340-346, 2000.

J. N. Israelachvili and H. Wennerstroem, Entropic forces between amphiphilic surfaces in liquids, The Journal of Physical Chemistry, vol.96, issue.2, pp.520-531, 1992.

W. B. Russel, D. A. Saville, and W. R. Schowalter, Colloidal Dispersions, 1989.

G. R. Wiese and T. W. Healy, Effect of particle size on colloid stability, Transactions of the Faraday Society, vol.66, p.490, 1970.

R. J. Hunter, Foundations of colloid science, 2001.

J. N. Israelachvili, Strong Intermolecular Forces, Intermolecular and Surface Forces, pp.53-70, 2011.

Y. S. Lee and N. J. Wagner, Dynamic properties of shear thickening colloidal suspensions, Rheologica Acta, vol.42, issue.3, pp.199-208, 2003.

B. J. Maranzano and N. J. Wagner, The effects of particle size on reversible shear thickening of concentrated colloidal dispersions, The Journal of Chemical Physics, vol.114, issue.23, pp.10514-10527, 2001.

C. M. Hansen, Hansen Solubility Parameters ? Biological Materials, Hansen Solubility Parameters, 1999.

S. Abbott and C. M. Hansen, Hansen Solubility Parameters ? Biological Materials, Hansen Solubility Parameters, 1999.

R. C. Crosson and H. J. Abrahams, Colloidal metals in nonaqueous solvents?By the Bredig method., Journal of Chemical Education, vol.23, issue.6, p.289, 1946.

K. Higashitani, K. Yoshida, N. Tanise, and H. Murata, Dispersion of coagulated colloids by ultrasonication, Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol.81, pp.167-175, 1993.

A. Dembele, M. Rahman, I. Reid, B. Twomey, J. M. Macelroy et al., Deposition of Hybrid Organic?Inorganic Composite Coatings Using an Atmospheric Plasma Jet System, Journal of Nanoscience and Nanotechnology, vol.11, issue.10, pp.8730-8737, 2011.

N. D. Boscher, P. Choquet, D. Duday, N. Kerbellec, J. Lambrechts et al., Luminescent lanthanide-based hybrid coatings deposited by atmospheric pressure plasma assisted chemical vapour deposition, Journal of Materials Chemistry, vol.21, issue.47, p.18959, 2011.

A. Uygun, L. Oksuz, A. G. Yavuz, A. Guleç, and S. Sen, Characteristics of nanocomposite films deposited by atmospheric pressure uniform RF glow plasma, Current Applied Physics, vol.11, issue.2, pp.250-254, 2011.

J. Profili, O. Levasseur, J. Blaisot, A. Koronai, L. Stafford et al., Nebulization of Nanocolloidal Suspensions for the Growth of Nanocomposite Coatings in Dielectric Barrier Discharges, Plasma Processes and Polymers, vol.13, issue.10, pp.981-989, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01611230

J. Profili, O. Levasseur, N. Naudé, C. Chaneac, L. Stafford et al., Influence of the voltage waveform during nanocomposite layer deposition by aerosol-assisted atmospheric pressure Townsend discharge, Journal of Applied Physics, vol.120, issue.5, p.053302, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01492705

A. Schutze, J. Y. Jeong, S. E. Babayan, . Jaeyoung-park, G. S. Selwyn et al., The atmospheric-pressure plasma jet: a review and comparison to other plasma sources, IEEE Transactions on Plasma Science, vol.26, issue.6, pp.1685-1694, 1998.

H. W. Herrmann, I. Henins, J. Park, and G. S. Selwyn, Decontamination of chemical and biological warfare (CBW) agents using an atmospheric pressure plasma jet (APPJ), Physics of Plasmas, vol.6, issue.5, pp.2284-2289, 1999.

G. S. Selwyn, H. W. Herrmann, J. Park, and I. Henins, Materials Processing Using an Atmospheric Pressure, RF-Generated Plasma Source, Contributions to Plasma Physics, vol.41, issue.6, pp.610-619, 2001.

H. R. Humud, A. K. Abass, and Z. Wheeb, Characteristic of Silver\ Polyaniline Nanocomposite Thin Films Prepared by Aerosol Assisted Dielectric Barrier Discharge Plasma Jet Polymerization, Asian Journal of Applied Science and Engineering, vol.3, issue.8, p.25, 2014.

A. Liguori, E. Traldi, E. Toccaceli, R. Laurita, A. Pollicino et al., Co-Deposition of Plasma-Polymerized Polyacrylic Acid and Silver Nanoparticles for the Production of Nanocomposite Coatings Using a Non-Equilibrium Atmospheric Pressure Plasma Jet, Plasma Processes and Polymers, vol.13, issue.6, pp.623-632, 2015.

K. S. Novoselov, A. K. Geim, S. V. Morozov, D. Jiang, Y. Zhang et al., Electric Field Effect in Atomically Thin Carbon Films, Science, vol.306, issue.5696, pp.666-669, 2004.

K. S. Novoselov, A. K. Geim, S. V. Morozov, D. Jiang, M. I. Katsnelson et al., Two-dimensional gas of massless Dirac fermions in graphene, Nature, vol.438, issue.7065, pp.197-200, 2005.

L. Gao, J. R. Guest, and N. P. Guisinger, Epitaxial Graphene on Cu(111), Nano Letters, vol.10, issue.9, pp.3512-3516, 2010.

P. W. Sutter, J. Flege, and E. A. Sutter, Epitaxial graphene on ruthenium, Nature Materials, vol.7, issue.5, pp.406-411, 2008.

J. Salvetat, J. Bonard, N. H. Thomson, A. J. Kulik, L. Forró et al., Mechanical properties of carbon nanotubes, Applied Physics A: Materials Science & Processing, vol.69, issue.3, pp.255-260, 1999.

R. S. Ruoff and D. C. Lorents, Mechanical and thermal properties of carbon nanotubes, Carbon, vol.33, issue.7, pp.925-930, 1995.

C. Lee, X. Wei, J. W. Kysar, and J. Hone, Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene, Science, vol.321, issue.5887, pp.385-388, 2008.

A. A. Balandin, S. Ghosh, W. Bao, I. Calizo, D. Teweldebrhan et al., Superior Thermal Conductivity of Single-Layer Graphene, Nano Letters, vol.8, issue.3, pp.902-907, 2008.

R. Prasher, Graphene Spreads the Heat, Science, vol.328, issue.5975, pp.185-186, 2010.

A. Cresti, N. Nemec, B. Biel, G. Niebler, F. Triozon et al., Charge transport in disordered graphene-based low dimensional materials, Nano Research, vol.1, issue.5, pp.361-394, 2008.

Y. Zhu, S. Murali, W. Cai, X. Li, J. W. Suk et al., Graphene and Graphene Oxide: Synthesis, Properties, and Applications, Advanced Materials, vol.22, issue.35, pp.3906-3924, 2010.

K. S. Aneja, S. Bohm, A. S. Khanna, and H. L. Bohm, Graphene based anticorrosive coatings for Cr(vi) replacement, Nanoscale, vol.7, issue.42, pp.17879-17888, 2015.

S. Chen, L. Brown, M. Levendorf, W. Cai, S. Ju et al., Oxidation Resistance of Graphene-Coated Cu and Cu/Ni Alloy, ACS Nano, vol.5, issue.2, pp.1321-1327, 2011.

Y. Hsieh, M. Hofmann, K. Chang, J. G. Jhu, Y. Li et al., Complete Corrosion Inhibition through Graphene Defect Passivation, ACS Nano, vol.8, issue.1, pp.443-448, 2013.

J. H. Park and J. M. Park, Electrophoretic deposition of graphene oxide on mild carbon steel for anti-corrosion application, Surface and Coatings Technology, vol.254, pp.167-174, 2014.

K. Jiang, J. Li, and J. Liu, Electrochemical codeposition of graphene platelets and nickel for improved corrosion resistant properties, RSC Advances, vol.4, issue.68, p.36245, 2014.

J. Liu, L. Hua, S. Li, and M. Yu, Graphene dip coatings: An effective anticorrosion barrier on aluminum, Applied Surface Science, vol.327, pp.241-245, 2015.

X. Li, Y. Zhu, W. Cai, M. Borysiak, B. Han et al., Transfer of Large-Area Graphene Films for High-Performance Transparent Conductive Electrodes, Nano Letters, vol.9, issue.12, pp.4359-4363, 2009.

R. S. Raman, P. C. Banerjee, D. E. Lobo, H. Gullapalli, M. Sumandasa et al., Protecting copper from electrochemical degradation by graphene coating, Carbon, vol.50, pp.4040-4045, 2012.

D. Prasai, J. C. Tuberquia, R. R. Harl, G. K. Jennings, and K. I. Bolotin, Graphene: Corrosion-Inhibiting Coating, ACS Nano, vol.6, issue.2, pp.1102-1108, 2012.

R. Ding, W. Li, X. Wang, T. Gui, B. Li et al., A brief review of corrosion protective films and coatings based on graphene and graphene oxide, Journal of Alloys and Compounds, vol.764, pp.1039-1055, 2018.

C. Chang, T. Huang, C. Peng, T. Yeh, N. I. Lu et al., Novel anticorrosion coatings prepared from polyaniline/graphene composites, Carbon, vol.50, issue.14, pp.5044-5051, 2012.

K. Qi, Y. Sun, H. Duan, and X. Guo, A corrosion-protective coating based on a solution-processable polymer-grafted graphene oxide nanocomposite, Corrosion Science, vol.98, pp.500-506, 2015.

W. Xia, H. Xue, J. Wang, T. Wang, L. Song et al., Functionlized graphene serving as free radical scavenger and corrosion protection in gamma-irradiated epoxy composites, Carbon, vol.101, pp.315-323, 2016.

W. Sun, L. Wang, T. Wu, Y. Pan, and G. Liu, Inhibited corrosion-promotion activity of graphene encapsulated in nanosized silicon oxide, Journal of Materials Chemistry A, vol.3, issue.32, pp.16843-16848, 2015.

K. Yu, M. Wang, K. Qian, X. Lu, and J. Sun, The synergy effect of Graphene/SiO2 hybrid materials on reinforcing and toughening epoxy resin, Fibers and Polymers, vol.17, issue.3, pp.453-459, 2016.

Y. Li, Z. Yang, H. Qiu, Y. Dai, Q. Zheng et al., Self-aligned graphene as anticorrosive barrier in waterborne polyurethane composite coatings, J. Mater. Chem. A, vol.2, issue.34, pp.14139-14145, 2014.

Y. Hayatgheib, B. Ramezanzadeh, P. Kardar, and M. Mahdavian, A comparative study on fabrication of a highly effective corrosion protective system based on graphene oxide-polyaniline nanofibers/epoxy composite, Corrosion Science, vol.133, pp.358-373, 2018.

. A37.pdf-n.d, Nachrichten - Hinweise (pp. A37), Materialwissenschaft und Werkstofftechnik, vol.10, issue.4, pp.A37-A37, 1979.

T. Merz, PDF Support in Applications, Web Publishing with Acrobat/PDF, pp.57-73, 1998.

T. X. Graham, X. Liquid diffusion applied to analysis, Philosophical Transactions of the Royal Society of London, vol.151, pp.183-224, 1861.
URL : https://hal.archives-ouvertes.fr/in2p3-00266772

C. C. Koch, Synthesis of nanostructured materials by mechanical milling: problems and opportunities, Nanostructured Materials, vol.9, issue.1-8, pp.13-22, 1997.

S. M. Olhero and J. M. Ferreira, Influence of particle size distribution on rheology and particle packing of silica-based suspensions, Powder Technology, vol.139, issue.1, pp.69-75, 2004.

R. Arbain, M. Othman, and S. Palaniandy, Preparation of iron oxide nanoparticles by mechanical milling, Minerals Engineering, vol.24, issue.1, pp.1-9, 2011.

N. Mandzy, E. Grulke, and T. Druffel, Breakage of TiO2 agglomerates in electrostatically stabilized aqueous dispersions, Powder Technology, vol.160, issue.2, pp.121-126, 2005.

J. Liang, Y. Huang, L. Zhang, Y. Wang, Y. Ma et al., Molecular-Level Dispersion of Graphene into Poly(vinyl alcohol) and Effective Reinforcement of their Nanocomposites, Advanced Functional Materials, vol.19, issue.14, pp.2297-2302, 2009.

G. D. Yuan, W. J. Zhang, Y. Yang, Y. B. Tang, Y. Q. Li et al., Graphene sheets via microwave chemical vapor deposition, Chemical Physics Letters, vol.467, issue.4-6, pp.361-364, 2009.

L. Chen, H. Konishi, A. Fehrenbacher, C. Ma, J. Xu et al., Novel nanoprocessing route for bulk graphene nanoplatelets reinforced metal matrix nanocomposites, Scripta Materialia, vol.67, issue.1, pp.29-32, 2012.

H. Yotsumoto and R. Yoon, Application of Extended DLVO Theory, Journal of Colloid and Interface Science, vol.157, issue.2, pp.434-441, 1993.

S. H. Behrens, D. I. Christl, R. Emmerzael, P. Schurtenberger, and M. Borkovec, Charging and Aggregation Properties of Carboxyl Latex Particles: Experiments versus DLVO Theory, Langmuir, vol.16, issue.6, pp.2566-2575, 2000.

Y. Hernandez, M. Lotya, D. Rickard, S. D. Bergin, and J. N. Coleman, Measurement of Multicomponent Solubility Parameters for Graphene Facilitates Solvent Discovery, Langmuir, vol.26, issue.5, pp.3208-3213, 2010.

A. Dembele, M. Rahman, I. Reid, B. Twomey, J. M. Macelroy et al., Deposition of Hybrid Organic?Inorganic Composite Coatings Using an Atmospheric Plasma Jet System, Journal of Nanoscience and Nanotechnology, vol.11, issue.10, pp.8730-8737, 2011.

D. Kuzmin, Introduction to computational fluid dynamics, 2004.

G. Chen, S. Chen, W. Feng, W. Chen, and S. Yang, Surface modification of the nanoparticles by an atmospheric room-temperature plasma fluidized bed, Applied Surface Science, vol.254, issue.13, pp.3915-3920, 2008.

M. Shimozuma, G. Tochitani, and H. Tagashira, Optical emission diagnostics of H2+CH4 50?Hz?13.56?MHz plasmas for chemical vapor deposition, Journal of Applied Physics, vol.70, issue.2, pp.645-648, 1991.

Y. Wang, J. Zhang, and X. Shen, Surface structures tailoring of hexamethyldisiloxane films by pulse rf plasma polymerization, Materials Chemistry and Physics, vol.96, issue.2-3, pp.498-505, 2006.

V. Leveille and S. Coulombe, Design and preliminary characterization of a miniature pulsed RF APGD torch with downstream injection of the source of reactive species, Plasma Sources Science and Technology, vol.14, p.467, 2005.

Q. Chen, Y. Zhang, E. Han, and Y. Ge, SiO2-like film deposition by dielectric barrier discharge plasma gun at ambient temperature under an atmospheric pressure, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.24, issue.6, pp.2082-2086, 2006.

S. E. Babayan, J. Y. Jeong, V. J. Tu, J. Park, G. S. Selwyn et al., Deposition of silicon dioxide films with an atmospheric-pressure plasma jet, Plasma Sources Science and Technology, vol.7, issue.3, pp.286-288, 1998.

S. E. Babayan, J. Y. Jeong, A. Schütze, V. J. Tu, M. Moravej et al., Deposition of silicon dioxide films with a non-equilibrium atmospheric-pressure plasma jet, Plasma Sources Science and Technology, vol.10, issue.4, pp.573-578, 2001.

B. Said, S. Arefi-khonsari, F. Pulpytel, and J. , Plasma Polymerization of 3-Aminopropyltrietoxysilane (APTES) by Open-Air Atmospheric Arc Plasma Jet for In-Line Treatments, Plasma Processes and Polymers, vol.13, pp.1025-1035, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01437466

J. Pulpytel, V. Kumar, P. Peng, V. Micheli, N. Laidani et al., Deposition of Organosilicon Coatings by a Non-Equilibrium Atmospheric Pressure Plasma Jet: Design, Analysis and Macroscopic Scaling Law of the Process, Plasma Processes and Polymers, vol.8, issue.7, pp.664-675, 2011.

B. Salem, D. Carton, O. Fakhouri, H. Pulpytel, J. Arefi-khonsari et al., Deposition of water stable plasma polymerized acrylic acid/MBA organic coatings by atmospheric pressure air plasma jet, Plasma Processes and Polymers, vol.11, pp.269-278, 2014.

B. Salem, D. Pulpytel, J. Pillier, F. Pailleret, A. Arefi-khonsari et al., Amorphization and Polymorphism Modification of Polyamide-6 Films via Open-Air Non-Equilibrium Atmospheric Pressure Plasma Jet Treatment, Plasma Processes and Polymers, vol.11, pp.961-973, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01084065

D. P. Dowling, F. T. O'neill, S. J. Langlais, and V. J. Law, Influence of dc Pulsed Atmospheric Pressure Plasma Jet Processing Conditions on Polymer Activation, Plasma Processes and Polymers, vol.8, issue.8, pp.718-727, 2011.

H. Hertz, Normal contact of elastic solids ? Hertz theory, Contact Mechanics, vol.92, pp.84-106, 1985.

I. N. Sneddon, The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile, International Journal of Engineering Science, vol.3, issue.1, pp.47-57, 1965.

M. F. Doerner and W. D. Nix, A method for interpreting the data from depth-sensing indentation instruments, Journal of Materials Research, vol.1, issue.4, pp.601-609, 1986.

J. S. Field and M. V. Swain, A simple predictive model for spherical indentation, Journal of Materials Research, vol.8, issue.2, pp.297-306, 1993.

W. C. Oliver and G. M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Journal of Materials Research, vol.7, issue.6, pp.1564-1583, 1992.
URL : https://hal.archives-ouvertes.fr/hal-01518596

A. Rar, S. Sohn, W. C. Oliver, D. L. Goldsby, T. E. Tullis et al., On the Measurement of Creep by Nanoindentation with Continuous Stiffness Techniques, MRS Proceedings, vol.841, 2004.

R. B. King, Elastic analysis of some punch problems for a layered medium, International Journal of Solids and Structures, vol.23, issue.12, pp.1657-1664, 1987.

J. N. Murray and H. P. Hack, Long-Term Testing of Epoxy-Coated Steel in ASTM Seawater Using Electrochemical Impedance Spectroscopy, CORROSION, vol.47, issue.6, pp.480-489, 1991.

F. Mansfeld, M. W. Kendig, and S. Tsai, Evaluation of Corrosion Behavior of Coated Metals with AC Impedance Measurements, CORROSION, vol.38, issue.9, pp.478-485, 1982.

F. Mansfeld and C. H. Tsai, Determination of Coating Deterioration with EIS: I. Basic Relationships, CORROSION, vol.47, issue.12, pp.958-963, 1991.

S. L. Zelinka, D. R. Rammer, and D. S. Stone, Electrochemical corrosion testing of fasteners in extracts of treated wood, Corrosion Science, vol.50, issue.5, pp.1251-1257, 2008.

D. V. Ribeiro, C. A. Souza, and J. C. Abrantes, Use of Electrochemical Impedance Spectroscopy (EIS) to monitoring the corrosion of reinforced concrete, Revista IBRACON de Estruturas e Materiais, vol.8, issue.4, pp.529-546, 2015.

H. Cesiulis, N. Tsyntsaru, A. Ramanavicius, and G. Ragoisha, The Study of Thin Films by Electrochemical Impedance Spectroscopy, Nanostructures and Thin Films for Multifunctional Applications, pp.3-42, 2016.

D. Loveday, P. Peterson, and B. Rodgers, Evaluation of organic coatings with electrochemical impedance spectroscopy, JCT Coatings Tech, vol.8, pp.46-52, 2004.

R. Morent, N. De-geyter, S. Van-vlierberghe, P. Dubruel, C. Leys et al., Organic?inorganic behaviour of HMDSO films plasma-polymerized at atmospheric pressure, Surface and Coatings Technology, vol.203, issue.10-11, pp.1366-1372, 2009.

C. Petit-etienne, M. Tatoulian, I. Mabille, E. Sutter, and F. Arefi-khonsari, Deposition of SiO?-Like Thin Films from a Mixture of HMDSO and Oxygen by Low Pressure and DBD Discharges to Improve the Corrosion Behaviour of Steel, Plasma Processes and Polymers, vol.4, issue.S1, pp.S562-S567, 2007.

J. Bour, J. Bardon, H. Aubriet, D. Del-frari, B. Verheyde et al., Different Ways to Plasma-Polymerize HMDSO in DBD Configuration at Atmospheric Pressure for Corrosion Protection, Plasma Processes and Polymers, vol.5, issue.8, pp.788-796, 2008.

J. Jiang, H. Tang, B. Wang, and Z. Su, Raman and infrared properties and layer dependence of the phonon dispersions in multilayered graphene, Physical Review B, vol.77, issue.23, p.235421, 2008.

R. J. Nemanich, G. Lucovsky, and S. A. Solin, Infrared active optical vibrations of graphite, Solid State Communications, vol.23, issue.2, pp.117-120, 1977.

C. Underhill, S. Y. Leung, G. Dresselhaus, and M. S. Dresselhaus, Infrared and Raman spectroscopy of graphite-ferric chloride, Solid State Communications, vol.29, issue.11, pp.769-774, 1979.

L. O'hare, B. Parbhoo, and S. R. Leadley, Development of a methodology for XPS curve-fitting of the Si 2p core level of siloxane materials, Surface and Interface Analysis, vol.36, issue.10, pp.1427-1434, 2004.

L. O'hare, A. Hynes, and M. R. Alexander, A methodology for curve-fitting of the XPS Si 2p core level from thin siloxane coatings, Surface and Interface Analysis, vol.39, issue.12-13, pp.926-936, 2007.

W. H. Walton, Feret?s Statistical Diameter as a Measure of Particle Size, Nature, vol.162, issue.4113, pp.329-330, 1948.

A. V. Baranov, Y. S. Bobovich, and V. I. Petrov, Surface-enhanced resonance hyper-Raman (SERHR) spectroscopy of photochromatic molecules, Journal of Raman Spectroscopy, vol.24, issue.10, pp.695-697, 1993.

C. Thomsen and S. Reich, Double Resonant Raman Scattering in Graphite, Physical Review Letters, vol.85, issue.24, pp.5214-5217, 2000.

G. Sun and G. Grundmeier, Surface-enhanced Raman spectroscopy of the growth of ultra-thin organosilicon plasma polymers on nanoporous Ag/SiO2-bilayer films, Thin Solid Films, vol.515, issue.4, pp.1266-1274, 2006.

A. C. Ferrari, J. C. Meyer, V. Scardaci, C. Casiraghi, M. Lazzeri et al., Raman Spectrum of Graphene and Graphene Layers, Physical Review Letters, vol.97, issue.18, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00130091

A. Ghosh, K. V. Rao, S. J. George, and C. N. Rao, Noncovalent Functionalization, Exfoliation, and Solubilization of Graphene in Water by Employing a Fluorescent Coronene Carboxylate, Chemistry - A European Journal, vol.16, issue.9, pp.2700-2704, 2010.

N. Benissad, K. Aumaille, A. Granier, and A. Goullet, Structure and properties of silicon oxide films deposited in a dual microwave-rf plasma reactor, Thin Solid Films, vol.384, issue.2, pp.230-235, 2001.

H. J. Kim, Q. Shao, and Y. J. Kim, Characterization of low-dielectric-constant SiOC thin films deposited by PECVD for interlayer dielectrics of multilevel interconnection, Surface and Coatings Technology, vol.171, issue.1-3, pp.39-45, 2003.

U. Wurstbauer, C. Röling, U. Wurstbauer, W. Wegscheider, M. Vaupel et al., Imaging ellipsometry of graphene, Applied Physics Letters, vol.97, issue.23, p.231901, 2010.

V. G. Kravets, A. N. Grigorenko, R. R. Nair, P. Blake, S. Anissimova et al., Spectroscopic ellipsometry of graphene and an exciton-shifted van Hove peak in absorption, Physical Review B, vol.81, issue.15, p.155413, 2010.

U. D. Cakmak, T. Schöberl, and Z. Major, Nanoindentation of polymers, Meccanica, vol.47, issue.3, pp.707-718, 2011.

M. R. Vanlandingham, J. S. Villarrubia, W. F. Guthrie, and G. F. Meyers, Nanoindentation of polymers: an overview, Macromolecular Symposia, vol.167, issue.1, pp.15-44, 2001.

B. J. Briscoe, L. Fiori, and E. Pelillo, Nano-indentation of polymeric surfaces, Journal of Physics D: Applied Physics, vol.31, issue.19, pp.2395-2405, 1998.

B. Aldousiri, H. N. Dhakal, S. Onuh, Z. Y. Zhang, and N. Bennett, Nanoindentation behaviour of layered silicate filled spent polyamide-12 nanocomposites, Polymer Testing, vol.30, issue.6, pp.688-692, 2011.

A. R. Alian, M. A. Dewapriya, and S. A. Meguid, Molecular dynamics study of the reinforcement effect of graphene in multilayered polymer nanocomposites, Materials & Design, vol.124, pp.47-57, 2017.

Y. Zhu, H. Wang, J. Zhu, L. Chang, and L. Ye, Nanoindentation and thermal study of polyvinylalcohol/graphene oxide nanocomposite film through organic/inorganic assembly, Applied Surface Science, vol.349, pp.27-34, 2015.

L. Shen, I. Y. Phang, L. Chen, T. Liu, and K. Zeng, Nanoindentation and morphological studies on nylon 66 nanocomposites. I. Effect of clay loading, Polymer, vol.45, issue.10, pp.3341-3349, 2004.

M. M. Shokrieh, M. R. Hosseinkhani, M. R. Naimi-jamal, and H. Tourani, Nanoindentation and nanoscratch investigations on graphene-based nanocomposites, Polymer Testing, vol.32, issue.1, pp.45-51, 2013.

A. Grill and D. A. Neumayer, Structure of low dielectric constant to extreme low dielectric constant SiCOH films: Fourier transform infrared spectroscopy characterization, Journal of Applied Physics, vol.94, issue.10, pp.6697-6707, 2003.

C. Y. Kim, S. H. Kim, H. S. Kim, R. Navamathavan, and C. K. Choi, Formation Mechanism and Structural Characteristics of Low-Dielectric-Constant SiOC(-H) Films Deposited by Using Plasma-Enhanced Chemical-Vapor Deposition with DMDMS and O2 Precursors, Journal of the Korean Physical Society, vol.50, issue.4, p.1119, 2007.

T. Oh and C. K. Choi, Comparison between SiOC Thin Film by plasma enhance chemical vapor deposition and SiO2 Thin Film by Fourier Transform Infrared Spectroscopy, Journal of the Korean Physical Society, vol.56, issue.4, pp.1150-1155, 2010.

G. Grundmeier and M. Stratmann, Influence of oxygen and argon plasma treatments on the chemical structure and redox state of oxide covered iron, Applied Surface Science, vol.141, issue.1-2, pp.43-56, 1999.

U. Lommatzsch, D. Pasedag, A. Baalmann, G. Ellinghorst, and H. Wagner, Atmospheric Pressure Plasma Jet Treatment of Polyethylene Surfaces for Adhesion Improvement, Plasma Processes and Polymers, vol.4, issue.S1, pp.S1041-S1045, 2007.

E. M. Liston, L. Martinu, and M. R. Wertheimer, Plasma surface modification of polymers for improved adhesion: a critical review, Journal of Adhesion Science and Technology, vol.7, issue.10, pp.1091-1127, 1993.

M. Stern and A. L. Geary, Closure to ?Discussion of ?Electrochemical Polarization, 1. A Theoretical Analysis of the Shape of Polarization Curves? [M. Stern and A. L. Geary (pp. 56?63, Vol. 104)]?, Journal of The Electrochemical Society, vol.104, issue.12, p.751, 1957.

S. Audisio and G. Béranger, Anticorrosion et durabilité dans le bâtiment, le génie civil et les ouvrages industriels. PPUR Presses polytechniques, 2010.

W. Volksen, R. D. Miller, and G. Dubois, Low Dielectric Constant Materials, Chemical Reviews, vol.110, issue.1, pp.56-110, 2010.

L. Beaunier, I. Epelboin, J. C. Lestrade, and H. Takenouti, Etude electrochimique, et par microscopie electronique a balayage, du fer recouvert de peinture, Surface Technology, vol.4, issue.3, pp.237-254, 1976.

R. L. Twite and G. P. Bierwagen, Review of alternatives to chromate for corrosion protection of aluminum aerospace alloys, Progress in Organic Coatings, vol.33, issue.2, pp.91-100, 1998.

V. Kakde and V. Mannari, Advanced chrome-free organic?inorganic hybrid pretreatments for aerospace aluminum alloy 2024-T3?application of novel bis-ureasil sol?gel precursors, Journal of Coatings Technology and Research, vol.6, issue.2, pp.201-211, 2008.

D. Zhu and W. J. Van-ooij, Corrosion protection of AA 2024-T3 by bis-[3-(triethoxysilyl)propyl]tetrasulfide in sodium chloride solution., Corrosion Science, vol.45, issue.10, pp.2177-2197, 2003.

A. J. Epstein, J. A. Smallfield, H. Guan, and M. Fahlman, Corrosion protection of aluminum and aluminum alloys by polyanilines: A potentiodynamic and photoelectron spectroscopy study, Synthetic Metals, vol.102, issue.1-3, pp.1374-1376, 1999.

M. Jalili, M. Rostami, and B. Ramezanzadeh, An investigation of the electrochemical action of the epoxy zinc-rich coatings containing surface modified aluminum nanoparticle, Applied Surface Science, vol.328, pp.95-108, 2015.

F. Maia, K. A. Yasakau, J. Carneiro, S. Kallip, J. Tedim et al., Corrosion protection of AA2024 by sol?gel coatings modified with MBT-loaded polyurea microcapsules, Chemical Engineering Journal, vol.283, pp.1108-1117, 2016.

D. B. Mascagni, M. E. Souza, C. M. Freire, S. L. Silva, R. D. Rangel et al., Corrosion resistance of 2024 aluminum alloy coated with plasma deposited a-C:H:Si:O films, Materials Research, vol.17, issue.6, pp.1449-1465, 2014.

M. Cambron, Les parades du Radeau, Agôn. Revue des arts de la scène, issue.5, 2013.

F. Girard, Les Six Cercles en une Goutte de Rosée : un traité de N? de Zenchiku (1405-1470), Impressions d?Extrême-Orient, issue.4, 2014.