A. Y. , E. Li-pei, G. Liang, Z. Yu, D. Luo et al., An Overview of Robot Calibration. Information, Technology Journal, vol.3, pp.74-78, 2004.

, ABB: IRB6640 Technical Information

. Airteamimages and . Com, Airbus A350-1000 (F-WLXV, 2017.

T. M. Anandan, Aerospace Manufacturing on Board with Robots, 2016.

P. Besset, A. Olabi, and O. Gibaru, Advanced calibration applied to a collaborative robot, 2016 IEEE International Power Electronics and Motion Control Conference (PEMC), pp.662-667, 2016.

, Blogjfa: Daher-Socata designed and builds the A350 XWB Main Landing Gear Doors "warped, 2014.

A. Calanca, R. Muradore, and P. Fiorini, A review of algorithms for compliant control of stiff and fixed-compliance robots, IEEE/ASME Transactions on Mechatronics, vol.21, issue.2, pp.613-624, 2016.

J. Chen and L. M. Chao, Positioning Error Analysis for Robot Manipulators with All Rotary Joints, IEEE Journal of Robotics and Automation RA, vol.3, issue.6, pp.539-545, 1987.

. Bibliography,

. Chen-gang, . Li-tong, X. Chu-ming, J. Q. Xu, and S. H. , Review on kinematics calibration technology of serial robots, International Journal of Precision Engineering and Manufacturing, vol.15, issue.8, pp.1759-1774, 2014.

N. Ciblak and H. Lipkin, Design and Analysis of Remote Center of Compliance Structures, Journal of Robotic Systems, vol.20, issue.8, pp.415-427, 2003.

, CORAC: Historique et présentation : CORAC Aéro Recherche -Aéronautique Civile

, Coriolis: Industry · Coriolis Composites

W. Cuypers, N. Van-gestel, A. Voet, J. P. Kruth, J. Mingneau et al., Optical measurement techniques for mobile and large-scale dimensional metrology, Optics and Lasers in Engineering, vol.47, issue.3-4, pp.292-300, 2009.

D. Schutter, J. Van-brussel, and H. , Compliant Robot Motion II. A Control Approach Based on External Control Loops, The International Journal of Robotics Research, vol.7, issue.4, pp.18-33, 1988.

R. Devlieg and T. Szallay, Applied Accurate Robotic Drilling for Aircraft Fuselage, SAE International Journal of Aerospace, vol.3, issue.1, pp.180-186, 2010.

J. R. Diaz-posada, U. Schneider, S. Pidan, M. Geravand, P. Stelzer et al., High accurate robotic drilling with external sensor and compliance model-based compensation, 2016 IEEE International Conference on Robotics and Automation (ICRA), pp.3901-3907, 2016.

C. Dillow, Airbus now has $1 trillion worth of jets on order, 2016.

G. Du, H. Shao, Y. Chen, P. Zhang, and X. Liu, An online method for serial robot self-calibration with CMAC and UKF, Robotics and Computer-Integrated Manufacturing, vol.42, pp.39-48, 2016.

G. Duelen and K. Schröer, Robot calibration-Method and Results, Robotics and Computer Integrated Manufacturing, vol.8, issue.4, pp.223-231, 1991.

, FANUC: Accurate robots for high-precision applications

R. Featherstone and D. E. Orin, Springer Handbook of Robotics, pp.35-65

H. Springer-berlin, , 2008.

R. Featherstone, S. Thiebaut, and O. Khatib, A general contact model for dynamically-decoupled force/motion control, International Conference on Robotics and Automation, pp.3281-3286, 1999.

B. Finkemeyer, T. Kröger, and F. M. Wahl, Placing of objects in unknown environments, 9th IEEE International Conference on Methods and Models in Automation and Robotics, pp.975-980, 2003.

F. Franceschini, M. Galetto, D. Maisano, and L. Mastrogiacomo, Large-scale dimensional metrology (LSDM): From tapes and theodolites to multi-sensor systems, International Journal of Precision Engineering and Manufacturing, vol.15, issue.8, pp.1739-1758, 2014.

F. Franceschini and D. Maisano, The evolution of large-scale dimensional metrology from the perspective of scientific articles and patents, International Journal of Advanced Manufacturing Technology, vol.70, issue.5-8, pp.887-909, 2014.

J. Gamez, J. Gomez, and R. Johansson, Sensor Fusion for Compliant Robot Motion Control, IEEE Transactions on Robotics, vol.24, issue.2, pp.430-441, 2008.

C. Gao, D. Cong, X. Liu, Z. Yang, and H. Tao, Hybrid position / force control of 6-dof hydraulic parallel manipulator using force and vision, Industrial Robot: An International Journal, vol.43, issue.3, 2016.

. Bibliography,

G. Gao, G. Sun, J. Na, Y. Guo, and X. Wu, Structural parameter identification for 6 DOF industrial robots, Mechanical Systems and Signal Processing, 2017.

S. Gharaaty, T. Shu, and A. Joubair, Online pose correction of an industrial robot using an optical coordinate measure machine system, International Journal of Advanced Robotic Systems, pp.1-16, 2018.

S. Gharaaty, T. Shu, W. F. Xie, A. Joubair, and I. A. Bonev, Accuracy Enhancement of Industrial Robots by On-line Pose Correction, Asia-Pacific Conference on Intelligent Robot Systems, pp.214-220, 2017.

C. Gong, J. Yuan, and J. Ni, Nongeometric error identification and compensation for robotic system by inverse calibration, International Journal of Machine Tools & Manufacture, vol.40, pp.2119-2137, 2000.

J. Hallenberg, Robot Tool Center Point Calibration using Computer Vision, 2007.

, Hexagon Manufacturing Intelligence: Metrology meets automation, 2017.

N. Hogan, Impedance Control: An Approach to Manipulation: Part I-Theory, Journal of Dynamic Systems, Measurement, and Control, vol.107, issue.1, pp.1-7, 1985.

K. Jaacks, Automated Circumferential Joint Assembly in Aircraft Production: Development and Assessment of a Production Process, 2016.

J. Park, R. Cortesao, and O. Khatib, Multi-contact compliant motion control for robotic manipulators, Proceedings -IEEE International Conference on Robotics and Automation, pp.4789-4794, 2004.

J. H. Jang, S. H. Kim, and Y. K. Kwak, Calibration of geometric and non-geometric errors of an industrial robot, Robotica, vol.19, pp.311-321, 2001.

Z. Jin, C. Yu, J. Li, and Y. Ke, A robot assisted assembly system for small components in aircraft assembly, Industrial Robot, vol.41, issue.5, pp.413-420, 2014.

A. Joubair and I. A. Bonev, Non-kinematic calibration of a six-axis serial robot using planar constraints, Precision Engineering, vol.40, pp.325-333, 2015.

K. Kamali, A. Joubair, I. A. Bonev, and P. Bigras, Elasto-geometrical calibration of an industrial robot under multidirectional external loads using a laser tracker, Proceedings -IEEE International Conference on Robotics and Automation, pp.4320-4327, 2016.

M. Khansari, E. Klingbeil, and O. Khatib, Adaptive human-inspired compliant contact primitives to perform surface-surface contact under uncertainty, International Journal of Robotics Research, vol.35, issue.13, pp.1651-1675, 2016.

H. Kihlman, Affordable Automation for Airframe Assembly : Developing of Key Enabling Technologies, 2005.

A. Klimchik, B. Furet, S. Caro, and A. Pashkevich, Identification of the manipulator stiffness model parameters in industrial environment, Mechanism and Machine Theory, vol.90, pp.1-22, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01201696

A. Klimchik and A. Pashkevich, Robotic manipulators with double encoders : accuracy improvement based on advanced stiffness modeling and intelligent control, IFAC-PapersOnLine, vol.51, issue.11, pp.740-745, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01980762

A. Klimchik, Y. Wu, C. Dumas, S. Caro, B. Furet et al., Identification of geometrical and elastostatic parameters of heavy industrial robots, 2013 IEEE International Conference on Robotics and Automation, pp.3707-3714, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00909578

, A new era of sensitive robotics is beginning

G. Kuka-deutschland, , 2019.

, imported/6b77eecacfe542d3b736af377562ecaa/0000188659_en.pdf?rev= 8b9f0ef0e1f5479b853698f4b45bcc7c&hash=E0D6B37A93AAB65737B1AF851BB2015E

G. Kuka-roboter,

C. Y. Lai, Improving the transient performance in robotics force control using nonlinear damping, ASME International Conference, 2014.

L. Flohic, J. Paccot, F. Bouton, N. Chanal, and H. , Application of hybrid force/position control on parallel machine for mechanical test, Mechatronics, vol.49, pp.168-176, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01914243

J. Li, M. Chen, X. Jin, Y. Chen, Z. Dai et al., Calibration of a multiple axes 3-D laser scanning system consisting of robot, portable laser scanner and turntable, Optik, vol.122, issue.4, pp.324-329, 2011.

J. Li, L. Liu, Y. Wang, and W. Liang, Adaptive Hybrid Impedance Control of Robot Manipulators with Robustness against Environment ' s Uncertainties, International Conference on Mechatronics and Automation, pp.1846-1851, 2015.

W. L. Li, H. Xie, G. Zhang, S. J. Yan, and Z. P. Yin, Hand-Eye Calibration in Visually-Guided Robot Grinding, IEEE Transactions on Cybernetics, vol.46, issue.11, pp.2634-2642, 2016.

R. Martín-martín, M. A. Lee, R. Gardner, S. Savarese, J. Bohg et al., Variable Impedance Control in End-Effector Space : An Action Space for Reinforcement Learning in Contact-Rich Tasks, International Conference on Intelligent Robots and Systems (IROS), 2019.

. Bibliography,

S. Mikhel, D. Popov, S. Mamedov, and A. Klimchik, Advancement of Robots With Double Encoders for Industrial and Collaborative Applications, 23rd Conference of FRUCT Association, pp.246-252, 2018.

C. Moeller, H. C. Schmidt, P. Koch, C. Boehlmann, S. Kothe et al., Real Time Pose Control of an Industrial Robotic System for Machining of Large Scale Components in Aerospace Industry Using Laser Tracker System Jörg Wollnack, SAE International Journal of Aerospace, pp.100-108, 2017.

J. E. Muelaner, Z. Wang, O. Martin, J. Jamshidi, and P. G. Maropoulos, Verification of the indoor GPS system, by comparison with calibrated coordinates and by angular reference, Journal of Intelligent Manufacturing, vol.23, issue.6, pp.2323-2331, 2012.

H. N. Nguyen, J. Zhou, and H. J. Kang, A calibration method for enhancing robot accuracy through integration of an extended Kalman filter algorithm and an artificial neural network, URL http, vol.151, pp.996-1005, 2015.

. //dx,

A. R. Norman, A. Schönberg, I. A. Gorlach, R. Schmitt, A. R. Norman et al., Validation of iGPS as an external measurement system for cooperative robot positioning, International Journal of Advanced Manufacturing Technology, vol.64, pp.427-446, 2013.

A. Nubiola and I. A. Bonev, Robotics and Computer-Integrated Manufacturing Absolute calibration of an ABB IRB 1600 robot using a laser tracker, Robotics and Computer Integrated Manufacturing, vol.29, issue.1, pp.236-245, 2013.

A. Nubiola, M. Slamani, A. Joubair, and I. A. Bonev, Comparison of two calibration methods for a small industrial robot based on an optical CMM and a laser tracker, Robotica, vol.32, pp.447-466, 2014.

A. Olabi, Amélioration de la précision des robots industriels pour des applications d ' usinage à grande vitesse, Arts et Métiers ParisTech, 2011.

C. Ott, R. Mukherjee, and Y. Nakamura, A Hybrid System Framework for Unified Impedance and Admittance Control, Journal of Intelligent and Robotic Systems, vol.78, pp.359-375, 2014.

Y. Qiao, Y. Chen, B. Chen, and J. Xie, A novel calibration method for multi-robots system utilizing calibration model without nominal kinematic parameters, Precision Engineering, vol.50, pp.211-221, 2017.

Z. Qin, P. Wang, J. Sun, J. Lu, and H. Qiao, Precise Robotic Assembly for Large-Scale Objects Based on Automatic Guidance and Alignment, IEEE Transactions on Instrumentation and Measurement, vol.65, issue.6, pp.1398-1411, 2016.

M. H. Raibert and J. J. Craig, Hybrid Position/Force Control of Manipulators, Transactions of the ASME, vol.102, pp.126-133, 1981.

R. Fernandez, S. Olabi, A. Gibaru, and O. , On-line Accurate 3D Positioning Solution for Robotic Large-Scale Assembly Using a Vision System and a 6Dof Tracking Unit, 2018 IEEE 3rd Advanced Information Technology, Electronic and Automation Control Conference (IAEAC), pp.682-688, 2018.

R. Fernandez, S. Olabi, A. Gibaru, and O. , Multi-Surface Admittance Control Approach applied on Robotic Assembly of Large-Scale parts in Aerospace Manufacturing, 2019 19th International Conference on Advanced Robotics (ICAR), pp.688-694, 2019.

R. Team, The Future of Aerospace Automation, 2016.

Z. S. Roth, B. W. Mooring, and B. Ravani, An Overview of Robot Calibration, Journal of Robotics and Automation, vol.3, pp.377-385, 1987.

L. Roveda, N. Pedrocchi, M. Beschi, and L. Molinati-tosatti, High-accuracy robotized industrial assembly task control schema with force overshoots avoidance, Control Engineering Practice, vol.71, pp.142-153, 2017.

L. Roveda, F. Vicentini, and L. Molinari-tosatti, Deformation-tracking Impedance Control in interaction with Uncertain Environments Loris, International Conference on Intelligent Robots and Systems (IROS), pp.1992-1997, 2013.

L. Roveda, F. Vicentini, N. Pedrocchi, and L. M. Tosatti, Impedance Control based Forcetracking Algorithm for Interaction Robotics Tasks : An Analytically Force Overshootsfree Approach, International Conference on Informatics in Control, Automation and Robotics, pp.386-391, 2015.

J. Santolaria, J. Conte, and M. Ginnés, Laser tracker-based kinematic parameter calibration of industrial robots by improved CPA method and active retroreflector, International Journal of Advanced Manufacturing Technology, vol.66, issue.9-12, pp.2087-2106, 2012.

R. Schmitt, A. Witte, M. Janßen, and F. Bertelsmeier, Metrology assisted assembly of airplane structure elements, Procedia CIRP, vol.23, pp.116-121, 2014.

R. H. Schmitt, M. Peterek, E. Morse, W. Knapp, M. Galetto et al., Advances in Large-Scale Metrology -Review and future trends, vol.65, pp.643-665, 2016.

. Bibliography,

J. Schön, Coefficient of friction for aluminum in contact with a carbon fiber epoxy composite, Tribology International, vol.37, issue.5, pp.395-404, 2004.

S. Shekhar and O. Khatib, Force Strategies in Real Time Fine Motion Assembly, ASME Winter Annual Meeting, 1987.

X. Shi, F. Zhang, X. Qu, and B. Liu, An online real-time path compensation system for industrial robots based on laser tracker, International Journal of Advanced Robotic Systems, vol.13, issue.5, pp.1-14, 2016.

J. Sloan, Main landing gear doors designed for all contingencies, 2014.

G. Boyé-de-sousa, A. Olabi, J. Palos, and O. Gibaru, 3D metrology using a collaborative robot with a laser triangulation sensor, Procedia Manufacturing, vol.11, pp.132-140, 2017.

, Staubli: TX200 Technical Information

L. Villani and J. De-schutter, Force Control, Springer Handbook of Robotics, pp.161-185, 2008.

K. Waldron and J. Schmiedeler, Kinematics, Springer Handbook of Robotics, pp.9-33

, , 2008.

D. E. Whitney, C. A. Lozinski, and L. M. Rourke, Industrial Robot Forward Calibration Method and Results, Journal of Dynamic Systems, Measurement, and Control, vol.108, pp.1-8, 1986.

G. Xiong, Y. Ding, L. M. Zhu, and C. Y. Su, A product-of-exponential-based robot calibration method with optimal measurement configurations, International Journal of Advanced Robotic Systems, vol.14, issue.6, pp.1-12, 2017.

. Bibliography,

X. Xu, D. Zhu, H. Zhang, S. Yan, and H. Ding, TCP-based calibration in robot-assisted belt grinding of aero-engine blades using scanner measurements, The International Journal of Advanced Manufacturing Technology, vol.90, issue.1-4, pp.635-647, 2016.

J. Yang, D. Wang, B. Fan, D. Dong, and W. Zhou, Online absolute pose compensation and steering control of industrial robot based on six degrees of freedom laser measurement, Optical Engineering, vol.56, issue.3, p.34111, 2017.

L. H. Yang, Y. Wang, J. G. Zhu, and X. Y. Yang, Distributed Optical Sensor Network with Self-Monitoring Mechanism for Accurate Indoor Location and Coordinate Measurement. Applied Mechanics and Materials 190-191, pp.972-976, 2012.

S. Yin, Y. Guo, Y. Ren, J. Zhu, S. Yang et al., A novel TCF calibration method for robotic visual measurement system, Optik, vol.125, issue.23, pp.6920-6925, 2014.

S. Yin, Y. Ren, Y. Guo, J. Zhu, S. Yang et al., Development and calibration of an integrated 3D scanning system for high-accuracy large-scale metrology, Measurement: Journal of the International Measurement Confederation, vol.54, pp.65-76, 2014.

S. Yin, Y. Ren, J. Zhu, S. Yang, and S. Ye, A vision-based self-calibration method for robotic visual inspection systems, Sensors, issue.12, pp.16565-16582, 2013.

C. Yu and J. Xi, Simultaneous and on-line calibration of a robot-based inspecting system, Robotics and Computer-Integrated Manufacturing, vol.49, pp.349-360, 2017.

,