, Understanding REACH', p.6, 2019.

, IARC Working Group on the Evaluation of Carcinogenic Risk to Humans, Occupational exposures in the rubber-manufacturing industry. International Agency for Research on Cancer, 2012.

M. Biron, Elastomères Thermoplastiques (TPE)', Techniques de l'Ingénieur, 2000.

F. X. Perrin, C. Merlatti, E. Aragon, and A. Margaillan, Degradation study of polymer coating: Improvement in coating weatherability testing and coating failure prediction, Prog. Org. Coat, vol.64, issue.4, pp.466-473, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01361807

A. Sakhri, F. X. Perrin, E. Aragon, S. Lamouric, and A. Benaboura, Chlorinated rubber paints for corrosion prevention of mild steel: A comparison between zinc phosphate and polyaniline pigments, Corros. Sci, vol.52, issue.3, pp.901-909, 2010.

M. Nakache, E. Aragon, L. Belec, F. Perrin, G. Roux et al., Degradation of rubber to metals bonds during its cathodic delamination, validation of an artificial ageing test, Prog. Org. Coat, vol.72, issue.3, pp.279-286, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01361878

C. Prisacariu, Polyurethane Elastomers: From Morphology to Mechanical Aspects, 2011.

D. J. Buckwalter, J. M. Dennis, and T. E. Long, Amide-containing segmented copolymers, Prog. Polym. Sci, vol.45, pp.1-22, 2015.

I. Yang and P. Tsai, Rheological characterization and microphase-separated structure of a poly(ether-block-amide) segmented block copolymer, J. Polym. Sci. Part B Polym. Phys, vol.43, issue.18, pp.2557-2567, 2005.

J. P. Sheth, D. B. Klinedinst, G. L. Wilkes, I. Yilgor, and E. Yilgor, Role of chain symmetry and hydrogen bonding in segmented copolymers with monodisperse hard segments, Polymer, vol.46, issue.18, pp.7317-7322, 2005.

S. Abouzahr, G. L. Wilkes, and Z. Ophir, Structure-property behaviour of segmented polyether-MDI-butanediol based urethanes: effect of composition ratio, Polymer, vol.23, issue.7, pp.1077-1086, 1982.

J. T. Koberstein, A. F. Galambos, and L. M. Leung, Compression-molded polyurethane block copolymers. 1. Microdomain morphology and thermomechanical properties, Macromolecules, vol.25, issue.23, pp.6195-6204, 1992.

Y. Li, Z. Ren, M. Zhao, H. Yang, and B. Chu, Multiphase structure of segmented polyurethanes: effects of hard-segment flexibility, Macromolecules, vol.26, issue.4, pp.612-622, 1993.

A. Eceiza, Thermoplastic polyurethane elastomers based on polycarbonate diols with different soft segment molecular weight and chemical structure: Mechanical and thermal properties, Polym. Eng. Sci, vol.48, issue.2, pp.297-306, 2008.

V. W. Srichatrapimuk and S. L. Cooper, Infrared thermal analysis of polyurethane block polymers, J. Macromol. Sci. Part B, vol.15, issue.2, pp.267-311, 1978.

B. F. Arlas, L. Rueda, K. De-la-caba, I. Mondragon, and A. Eceiza, Microdomain composition and properties differences of biodegradable polyurethanes based on MDI and HDI, Polym. Eng. Sci, vol.48, issue.3, pp.519-529, 2008.

G. E. Molau, Colloidal and Morphological Behavior of Block and Graft Copolymers', in Block Polymers, pp.79-106, 1970.

G. R. Hatfield, Y. Guo, W. E. Killinger, R. A. Andrejak, and P. M. Roubicek, Characterization of structure and morphology in two poly(ether-block-amide) copolymers, Macromolecules, vol.26, issue.24, pp.6350-6353, 1993.

I. Yilgor, E. Yilgor, I. G. Guler, T. C. Ward, and G. L. Wilkes, FTIR investigation of the influence of diisocyanate symmetry on the morphology development in model segmented polyurethanes, Polymer, vol.47, issue.11, pp.4105-4114, 2006.

C. Prisacariu, R. H. Olley, A. A. Caraculacu, D. C. Bassett, and C. Martin, The effect of hard segment ordering in copolyurethane elastomers obtained by using simultaneously two types of diisocyanates, Polymer, vol.44, issue.18, pp.5407-5421, 2003.

L. M. Leung and J. T. Koberstein, DSC annealing study of microphase separation and multiple endothermic behavior in polyether-based polyurethane block copolymers, Macromolecules, vol.19, issue.3, pp.706-713, 1986.

Y. Camberlin and J. P. Pascault, Phase segregation kinetics in segmented linear polyurethanes: Relations between equilibrium time and chain mobility and between equilibrium degree of segregation and interaction parameter, J. Polym. Sci. Polym. Phys. Ed, vol.22, issue.10, pp.1835-1844, 1984.

M. Xie and Y. Camberlin, Etude morphologique de bloc-copoly(éther-amide)s', Makromol. Chem, vol.187, issue.2, pp.383-400, 1986.

C. S. Sung and N. S. Schneider, Structure-property relationships of polyurethanes based on toluene di-isocyanate, J. Mater. Sci, vol.13, issue.8, pp.1689-1699, 1978.

C. P. Buckley, C. Prisacariu, and C. Martin, Elasticity and inelasticity of thermoplastic polyurethane elastomers: Sensitivity to chemical and physical structure, Polymer, vol.51, issue.14, pp.3213-3224, 2010.

C. Prisacariu, E. Scortanu, A. Airinei, B. Agapie, M. Iurzhenko et al., New Developments in Thermoplastic Polyurethanes of Variable Crystallinity: Sensitivity of Cyclic Stress-Strain Response to Chemical Structure, Procedia Eng, vol.10, pp.446-454, 2011.

M. L. Lorenzo, M. Pyda, and B. Wunderlich, Calorimetry of nanophase-separated poly(oligoamide-alt-oligoether)s', J. Polym. Sci. Part B Polym. Phys, vol.39, issue.14, pp.1594-1604, 2001.

J. P. Sheth, J. Xu, and G. L. Wilkes, Solid state structure-property behavior of semicrystalline poly(ether-block-amide) PEBAX® thermoplastic elastomers, Polymer, vol.44, issue.3, pp.743-756, 2003.

C. Prisacariu, E. Scortanu, and B. Agapie, Effect of the hydrogen bonding on the inelasticity of thermoplastic polyurethane elastomers, J. Ind. Eng. Chem, vol.19, issue.1, pp.113-119, 2013.

S. Ghosh, D. Khastgir, and A. K. Bhowmick, Effect of block molecular weight on the mechanical and dynamic mechanical properties of segmented polyamide, Polymer, vol.39, issue.17, pp.3967-3975, 1998.

R. J. Zdrahala, R. M. Gerkin, S. L. Hager, and F. E. Critchfield, Polyether-based thermoplastic polyurethanes. I. Effect of the hard-segment content, J. Appl. Polym. Sci, vol.24, issue.9, pp.2041-2050, 1979.

E. F. White, Br. Polym. J, vol.18, issue.6, pp.403-404, 1985.

S. Armstrong, B. Freeman, A. Hiltner, and E. Baer, Gas permeability of melt-processed poly(ether block amide) copolymers and the effects of orientation, Polymer, vol.53, issue.6, pp.1383-1392, 2012.

J. Diani, B. Fayolle, and P. Gilormini, A review on the Mullins effect, Eur. Polym. J, vol.45, issue.3, pp.601-612, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00773015

K. B. Broberg, On stable crack growth, J. Mech. Phys. Solids, vol.23, issue.3, pp.215-237, 1975.

B. Cotterell and J. K. Reddel, The essential work of plane stress ductile fracture, Int. J. Fract, vol.13, issue.3, pp.267-277, 1977.

B. Fayolle, L. Audouin, and J. Verdu, A critical molar mass separating the ductile and brittle regimes as revealed by thermal oxidation in polypropylene, Polymer, vol.45, issue.12, pp.4323-4330, 2004.

J. Lee, B. Choi, J. Moon, and E. Lee, Determination of the tear properties of thermoplastic polyester elastomers (TPEEs) using essential work of fracture (EWF) test method, Polym. Test, vol.28, issue.8, pp.854-865, 2009.

A. D. Drozdov, S. Clyens, and J. Christiansen, Essential work of fracture and viscoplastic response of a carbon black-filled thermoplastic elastomer, Eng. Fract. Mech, vol.76, issue.13, 1977.

P. Y. Le-gac, M. Broudin, G. Roux, J. Verdu, P. Davies et al., Role of strain induced crystallization and oxidative crosslinking in fracture properties of rubbers, Polymer, vol.55, issue.10, pp.2535-2542, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01058326

B. Huneau, Strain-induced crystallization of natural rubber: a review of x-ray diffraction investigations, Rubber Chem. Technol, vol.84, issue.3, pp.425-452, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01007326

P. Albouy, A. Vieyres, R. Pérez-aparicio, O. Sanséau, and P. Sotta, The impact of straininduced crystallization on strain during mechanical cycling of cross-linked natural rubber, Polymer, vol.55, issue.16, pp.4022-4031, 2014.

S. Trabelsi, P. Albouy, and J. Rault, Crystallization and melting processes in vulcanized stretched natural rubber, Macromolecules, vol.36, issue.20, pp.7624-7639, 2003.

F. Grasland, L. Chazeau, J. Chenal, J. Caillard, and R. Schach, About the elongation at break of unfilled natural rubber elastomers, Polymer, vol.169, pp.195-206, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02405451

J. Chenal, C. Gauthier, L. Chazeau, L. Guy, and Y. Bomal, Parameters governing strain induced crystallization in filled natural rubber, Polymer, vol.48, issue.23, pp.6893-6901, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00434168

P. Gac, P. Albouy, and D. Petermann, Strain-induced crystallization in an unfilled polychloroprene rubber: Kinetics and mechanical cycling, Polymer, vol.142, pp.209-217, 2018.

P. Gac, P. Albouy, and P. Sotta, Strain-induced crystallization in a carbon-black filled polychloroprene rubber: Kinetics and mechanical cycling, Polymer, vol.173, pp.158-165, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02350601

Y. Song, H. Yamamoto, and N. Nemoto, Segmental Orientations and Deformation Mechanism of Poly(ether-block-amide) Films', Macromolecules, vol.37, pp.6219-6226, 2004.

B. B. Sauer, R. S. Mclean, D. J. Brill, and D. J. Londono, Morphology and orientation during the deformation of segmented elastomers studied with small-angle X-ray scattering and atomic force microscopy, J. Polym. Sci. Part B Polym. Phys, vol.40, issue.16, pp.1727-1740, 2002.

V. Barbi, S. S. Funari, R. Gehrke, N. Scharnagl, and N. Stribeck, SAXS and the Gas Transport in Polyether-block-polyamide Copolymer Membranes', Macromolecules, vol.36, pp.749-758, 2003.

R. Bonart, X-ray investigations concerning the physical structure of cross-linking in segmented urethane elastomers, J. Macromol. Sci. Part B, vol.2, issue.1, pp.115-138, 1968.

M. Xu, W. J. Macknight, C. H. Chen-tsai, and E. L. Thomas, Structure and morphology of segmented polyurethanes: 4. Domain structures of different scales and the composition heterogeneity of the polymers, Polymer, vol.28, issue.13, pp.2183-2189, 1987.

N. Reynolds, H. W. Spiess, H. Hayen, H. Nefzger, and C. D. Eisenbach, Structure and deformation behaviour of model poly(ether-urethane) elastomers, 1. Infrared studies', Macromol. Chem. Phys, vol.195, issue.8, pp.2855-2873, 1994.

F. Yeh, B. S. Hsiao, B. B. Sauer, S. Michel, and H. W. Siesler, Situ Studies of Structure Development during Deformation of a Segmented Poly(urethane?urea) Elastomer', Macromolecules, vol.36, pp.1940-1954, 2003.

V. N. Nguyen, F. X. Perrin, and J. L. Vernet, Water permeability of organic/inorganic hybrid coatings prepared by sol-gel method: a comparison between gravimetric and capacitance measurements and evaluation of non-Fickian sorption models, Corros. Sci, vol.47, issue.2, pp.397-412, 2005.

M. Lacuve, Investigation and modelling of the water transport properties in unfilled EPDM elastomers, Polym. Degrad. Stab, vol.168, p.108949, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02429352

M. Broudin, Water diffusivity in PA66: Experimental characterization and modeling based on free volume theory, Eur. Polym. J, vol.67, pp.326-334, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01286051

C. E. Hoyle, K. Kim, Y. G. No, and G. L. Nelson, Photolysis of segmented polyurethanes. The role of hard-segment content and hydrogen bonding, J. Appl. Polym. Sci, vol.34, issue.2, pp.763-774, 1987.

M. A. Schubert, M. J. Wiggins, M. P. Schaefer, A. Hiltner, and J. M. Anderson, Oxidative biodegradation mechanisms of biaxially strained poly(etherurethane urea) elastomers, J. Biomed. Mater. Res, vol.29, issue.3, pp.337-347, 1995.

C. M. Diaz, X. Gao, A. Robisson, M. Amarante, and S. S. Zhu, Effect of hydrolytic degradation on the mechanical property of a thermoplastic polyether ester elastomer, Polym. Degrad. Stab, vol.155, pp.35-42, 2018.

T. Pretsch, I. Jakob, and W. Müller, Hydrolytic degradation and functional stability of a segmented shape memory poly(ester urethane, Polym. Degrad. Stab, vol.94, issue.1, pp.61-73, 2009.

D. W. Brown, R. E. Lowry, and L. E. Smith, Kinetics of Hydrolytic Aging of Polyester Urethane Elastomers, Macromolecules, vol.13, issue.2, pp.248-252, 1980.

M. E. Rezac, T. John, and P. H. Pfromm, Effect of copolymer composition on the solubility and diffusivity of water and methanol in a series of polyether amides, J. Appl. Polym. Sci, vol.65, issue.10, 1983.

E. Linde, N. H. Giron, and M. C. Celina, Water diffusion with temperature enabling predictions for sorption and transport behavior in thermoset materials, Polymer, vol.153, pp.653-667, 2018.

A. Ilioni, P. Gac, C. Badulescu, D. Thévenet, and P. Davies, Prediction of Mechanical Behaviour of a Bulk Epoxy Adhesive in a Marine Environment, J. Adhes, vol.95, issue.1, pp.64-84, 2019.
URL : https://hal.archives-ouvertes.fr/hal-01727668

D. Pierre-yves-le-gac, D. Choqueuse, and . Melot, Description and modeling of polyurethane hydrolysis used as thermal insulation in oil offshore conditions, Polym. Test, vol.32, pp.1588-1593, 2013.

V. Bellenger, M. Ganem, B. Mortaigne, and J. Verdu, Lifetime prediction in the hydrolytic ageing of polyesters, Polym. Degrad. Stab, vol.49, issue.1, pp.91-97, 1995.

C. El-mazry, O. Correc, and X. Colin, A new kinetic model for predicting polyamide 6-6 hydrolysis and its mechanical embrittlement, Polym. Degrad. Stab, vol.97, issue.6, pp.1049-1059, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01082759

A. Meyer, N. Jones, Y. Lin, and D. Kranbuehl, Characterizing and Modeling the Hydrolysis of Polyamide-11 in a pH 7 Water Environment, Macromolecules, vol.35, issue.7, pp.2784-2798, 2002.

B. Jacques, M. Werth, I. Merdas, F. Thominette, and J. Verdu, Hydrolytic ageing of polyamide 11. 1. Hydrolysis kinetics in water, Polymer, vol.43, issue.24, pp.6439-6447, 2002.

S. Hocker, A. K. Rhudy, G. Ginsburg, and D. E. Kranbuehl, Polyamide hydrolysis accelerated by small weak organic acids, Polymer, vol.55, issue.20, pp.5057-5064, 2014.

G. Serpe, N. Chaupart, and J. Verdu, Ageing of polyamide 11 in acid solutions, Polymer, vol.38, issue.8, pp.1911-1917, 1997.

N. Chaupart, G. Serpe, and J. Verdu, Molecular weight distribution and mass changes during polyamide hydrolysis, Polymer, vol.39, issue.6, pp.1375-1380, 1998.

A. Gleadall, J. Pan, M. Kruft, and M. Kellomäki, Degradation mechanisms of bioresorbable polyesters. Part 1. Effects of random scission, end scission and autocatalysis, Acta Biomater, vol.10, issue.5, pp.2223-2232, 2014.

P. I. Borovikov, Model of aliphatic polyesters hydrolysis comprising water and oligomers diffusion, Polym. Degrad. Stab, vol.159, 2018.

M. R. Salazar, Degradation of a poly(ester urethane) elastomer. III. Estane 5703 hydrolysis: Experiments and modeling, J. Polym. Sci. Part Polym. Chem, vol.41, issue.8, pp.1136-1151, 2003.

D. W. Brown, R. E. Lowry, and L. E. Smith, Hydrolytic degradation of polyester polyurethanes containing carbodiimides, Macromolecules, vol.15, 1982.

T. M. Chapman, Models for polyurethane hydrolysis under moderately acidic conditions: A comparative study of hydrolysis rates of urethanes, ureas, and amides, J. Polym. Sci. Part Polym. Chem, vol.27, issue.6, 1989.

L. Fambri, A. Penati, and J. Kolarik, Synthesis and hydrolytic stability of model poly(ester urethane ureas, Angew. Makromol. Chem, vol.228, issue.1, pp.201-219, 1995.

A. Launay, F. Thominette, and J. Verdu, Hydrolysis of poly(ethylene terephthalate): a kinetic study, Polym. Degrad. Stab, vol.46, issue.3, pp.319-324, 1994.

X. Han, J. Pan, F. Buchanan, N. Weir, and D. Farrar, Analysis of degradation data of poly(llactide-co-l,d-lactide) and poly(l-lactide) obtained at elevated and physiological temperatures using mathematical models, Acta Biomater, vol.6, issue.10, pp.3882-3889, 2010.

M. C. Celina, Review of polymer oxidation and its relationship with materials performance and lifetime prediction, Polym. Degrad. Stab, vol.98, issue.12, pp.2419-2429, 2013.

B. Fayolle, A. Tcharkhtchi, and J. Verdu, Temperature and molecular weight dependence of fracture behaviour of polypropylene films, Polym. Test, vol.23, issue.8, pp.939-947, 2004.

B. Fayolle, X. Colin, L. Audouin, and J. Verdu, Mechanism of degradation induced embrittlement in polyethylene, Polym. Degrad. Stab, vol.92, issue.2, pp.231-238, 2007.

B. Fayolle and J. Verdu, Radiation aging and chemi-crystallization processes in polyoxymethylene, Eur. Polym. J, vol.47, issue.11, pp.2145-2151, 2011.
URL : https://hal.archives-ouvertes.fr/hal-02455197

B. Fayolle, L. Audouin, and J. Verdu, Radiation induced embrittlement of PTFE, Polymer, vol.44, issue.9, pp.2773-2780, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00117460

C. El-mazry, M. Ben-hassine, O. Correc, and X. Colin, Thermal oxidation kinetics of additive free polyamide 6-6', Polym. Degrad. Stab, vol.98, issue.1, pp.22-36, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00984697

O. Okamba-diogo, E. Richaud, J. Verdu, F. Fernagut, J. Guilment et al., Investigation of polyamide 11 embrittlement during oxidative degradation, Polymer, vol.82, pp.49-56, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01483574

W. Dong and P. Gijsman, Influence of temperature on the thermo-oxidative degradation of polyamide 6 films, Polym. Degrad. Stab, vol.95, issue.6, pp.1054-1062, 2010.

J. Gardette and J. Lemaire, Oxydation photothermique d'élastomères de polyuréthannes thermoplastiques, 1. Propriétés des hydroperoxydes formés, Makromol. Chem, vol.182, issue.10, pp.2723-2736, 1981.

A. Dannoux, S. Esnouf, B. Amekraz, V. Dauvois, and C. Moulin, Degradation mechanism of poly(ether-urethane) Estane® induced by high-energy radiation. II. Oxidation effects, J. Polym. Sci. Part B Polym. Phys, vol.46, issue.9, pp.861-878, 2008.

E. M. Christenson, J. M. Anderson, and A. Hiltner, Oxidative mechanisms of poly(carbonate urethane) and poly(ether urethane) biodegradation: In vivo and in vitro correlations, J. Biomed. Mater. Res. A, vol.70, issue.2, pp.245-255, 2004.

S. Ghosh, D. Khastgir, A. K. Bhowmick, and P. G. Mukunda, Thermal degradation and ageing of segmented polyamides, Polym. Degrad. Stab, vol.67, issue.3, pp.427-436, 2000.

P. Y. Le-gac, M. Celina, G. Roux, J. Verdu, P. Davies et al., Predictive ageing of elastomers: Oxidation driven modulus changes for polychloroprene, Polym. Degrad. Stab, vol.130, pp.348-355, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02271733

M. Coquillat, J. Verdu, X. Colin, L. Audouin, and R. Nevière, Thermal oxidation of polybutadiene. Part 1: Effect of temperature, oxygen pressure and sample thickness on the thermal oxidation of hydroxyl-terminated polybutadiene, Polym. Degrad. Stab, vol.92, issue.7, pp.1326-1333, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00199759

E. Planes, L. Chazeau, G. Vigier, and J. Fournier, Evolution of EPDM networks aged by gamma irradiation -Consequences on the mechanical properties, Polymer, vol.50, issue.16, pp.4028-4038, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00539586

A. De-almeida, L. Chazeau, G. Vigier, G. Marque, and Y. Goutille, Ultimate and toughness properties of ?-irradiated EPDM, Eur. Polym. J, vol.97, pp.178-187, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01804254

B. Fayolle, E. Richaud, X. Colin, and J. Verdu, Review: Degradation-induced embrittlement in semi-crystalline polymers having their amorphous phase in rubbery state, J. Mater. Sci, vol.43, pp.6999-7012, 2008.

S. J. Hocker, W. T. Kim, H. C. Schniepp, and D. E. Kranbuehl, Polymer crystallinity and the ductile to brittle transition, Polymer, vol.158, pp.72-76, 2018.

W. Kuhn, Dependence of the average transversal on the longitudinal dimensions of statistical coils formed by chain molecules, J. Polym. Sci, vol.1, issue.5, pp.380-388, 1946.

A. Ahagon, Extensibility of Black Filled Elastomers, Rubber Chem. Technol, vol.59, issue.2, pp.187-203, 1986.

E. V. Konyukhova, A. I. Buzin, and Y. K. Godovsky, Melting of polyether block amide (Pebax): the effect of stretching, Thermochim. Acta, vol.391, issue.1, pp.271-277, 2002.

D. G. Thompson, J. C. Osborn, E. M. Kober, and J. R. Schoonover, Effects of hydrolysisinduced molecular weight changes on the phase separation of a polyester polyurethane, Polym. Degrad. Stab, vol.91, issue.12, pp.3360-3370, 2006.

. Lyu, Kinetics and Time?Temperature Equivalence of Polymer Degradation, Biomacromolecules, vol.8, issue.7, pp.2301-2310, 2007.

T. Bánsági and A. Taylor, Ester hydrolysis: Conditions for acid autocatalysis and a kinetic switch, Tetrahedron, vol.73, 2017.

C. M. Comisar, S. E. Hunter, A. Walton, and P. E. Savage, Effect of pH on Ether, Ester, and Carbonate Hydrolysis in High-Temperature Water, Ind. Eng. Chem. Res, vol.47, issue.3, pp.577-584, 2008.

G. L. Siparsky, K. J. Voorhees, and F. Miao, Hydrolysis of Polylactic Acid (PLA) and Polycaprolactone (PCL) in Aqueous Acetonitrile Solutions: Autocatalysis, J. Environ. Polym. Degrad, vol.6, issue.1, pp.31-41, 1998.

R. Goldberg, N. Kishore, and R. Lennen, Thermodynamic Quantities for the Ionization Reactions of Buffers, J. Phys. Chem. Ref. Data, vol.31, pp.231-370, 2002.

D. W. Brown, R. E. Lowry, and L. E. Smith, Kinetics of the reaction between polyester acid and carbodiimide in dry polyester diols and in a polyester polyurethane, Macromolecules, vol.14, issue.3, pp.659-663, 1981.

Q. P. Lei, D. H. Lamb, R. K. Heller, A. G. Shannon, R. Ryall et al., Kinetic studies on the rate of hydrolysis of N-ethyl-N?-(dimethylaminopropyl)carbodiimide in aqueous solutions using mass spectrometry and capillary electrophoresis, Anal. Biochem, vol.310, issue.1, pp.122-124, 2002.

A. Porfyris, Accelerated ageing and hydrolytic stabilization of poly(lactic acid) (PLA) under humidity and temperature conditioning, Polym. Test, vol.68, pp.315-332, 2018.

O. Saito, Effects of High Energy Radiation on Polymers II. End-linking and Gel Fraction, J. Phys. Soc. Jpn, vol.13, issue.12, pp.1451-1464, 1958.

C. S. Schollenberger and F. D. Stewart, Thermoplastic Polyurethane Hydrolysis Stability, J. Elastoplast, vol.3, issue.1, pp.28-56, 1971.

D. Ferrer-balas, M. L. Maspoch, A. B. Martinez, E. Ching, R. K. Li et al., Fracture behaviour of polypropylene films at different temperatures: assessment of the EWF parameters, Polymer, vol.42, issue.6, pp.2665-2674, 2001.

A. F. Reano, A. Guinault, E. Richaud, and B. Fayolle, Polyethylene loss of ductility during oxidation: Effect of initial molar mass distribution, Polym. Degrad. Stab, vol.149, pp.78-84, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01741541

B. Fayolle, L. Audouin, and J. Verdu, Oxidation induced embrittlement in polypropylenea tensile testing study, Polym. Degrad. Stab, vol.70, issue.3, pp.333-340, 2000.

P. Albouy, G. Guillier, D. Petermann, A. Vieyres, O. Sanseau et al., A stroboscopic X-ray apparatus for the study of the kinetics of strain-induced crystallization in natural rubber, Polymer, vol.53, issue.15, pp.3313-3324, 2012.

K. Inoue and S. Hoshino, Crystal structure of nylon 12, J. Polym. Sci. Polym. Phys. Ed, vol.11, issue.6, pp.1077-1089, 1973.

N. Hiramatsu, K. Haraguchi, and S. Hirakawa, Study of Transformations among ?, ? and ?' Forms in Nylon 12 by X-Ray and DSC, JaJAP, vol.22, issue.2, p.335, 1983.

K. Imada, T. Miyakawa, Y. Chatani, H. Tadokoro, and S. Murahashi, Molecular and crystal structure of polytetrahydrofuran, Makromol. Chem, vol.83, issue.1, pp.113-128, 1965.

L. Imbernon, R. Pauchet, M. Pire, P. Albouy, S. Tencé-girault et al., Straininduced crystallization in sustainably crosslinked epoxidized natural rubber, Polymer, vol.93, pp.189-197, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02404864

I. M. Ward and J. Sweeney, Yielding and Instability in Polymers', in Mechanical Properties of Solid Polymers, pp.319-378, 2012.

L. J. Fetters, D. J. Lohse, D. Richter, T. A. Witten, and A. Zirkel, Connection between Polymer Molecular Weight, Density, Chain Dimensions, and Melt Viscoelastic Properties', Macromolecules, vol.27, pp.4639-4647, 1994.

V. L. Saux, P. Y. Le-gac, Y. Marco, and S. Calloch, Limits in the validity of Arrhenius predictions for field ageing of a silica filled polychloroprene in a marine environment, Polym. Degrad. Stab, vol.99, pp.254-261, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00949688