P. Abeloff, F. Dougherty, and W. Van-dalsem, Thermal interaction between an impinging hot jet and a conducting solid surface, Flight Simulation Technologies Conference and Exhibit, p.3010, 1990.

S. I. Baek and S. Yavuzkurt, Effects of oscillations in the main flow on film cooling at various frequencies at a low blowing ratio, Turbomachinery Technical Conference and Exposition, pp.5-12, 2018.

P. F. Beard, T. Povey, C. , and K. S. , Turbine efficiency measurement system for the qinetiq turbine test facility, Journal of Turbomachinery, vol.132, issue.1, p.11002, 2010.

D. E. Bohn and C. Tummers, Numerical 3-d conjugate flow and heat transfer investigation of a transonic convection-cooled thermal barrier coated turbine guide vane with reduced cooling fluid mass flow, ASME Turbo Expo 2003, collocated with the 2003 International Joint Power Generation Conference, pp.279-286, 2003.

D. Bruna and M. G. Turner, Isothermal boundary condition at casing applied to the rotor 37 transonic axial flow compressor, Journal of Turbomachinery, vol.135, issue.3, p.34501, 2013.

D. Bruna and M. G. Turner, A rothalpy analysis for the isothermal boundary condition at casing applied to the rotor 37 transonic axial flow compressor, ASME Turbo Expo 2013 : Turbine Technical Conference and Exposition, pp.6-37, 2013.

K. L. Burlet and D. J. Dorney, Influence of 3d hot streaks on turbine heat transfer, International Journal of Turbo and Jet Engines, vol.14, issue.3, pp.123-132, 1997.

T. Butler, O. Sharma, H. Joslyn, and R. Dring, Redistribution of an inlet temperature distortion in an axial flow turbine stage, Journal of Propulsion and Power, vol.5, issue.1, pp.64-71, 1989.

D. R. Buttsworth and T. Jones, Radial conduction effects in transient heat transfer experiments, The Aeronautical Journal, vol.101, pp.209-212, 1005.

L. Cambier, S. Heib, and S. Plot, The onera elsa cfd software : input from research and feedback from industry, Mechanics & Industry, vol.14, issue.3, pp.159-174, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01293795

H. S. Carslaw and J. C. Jaeger, Conduction of heat in solids, 1960.

M. V. Casey and T. M. Fesich, On the efficiency of compressors with diabatic flows, ASME Turbo Expo, pp.785-797, 2009.

L. Castillon, G. Billonnet, J. Riou, S. Péron, and C. Benoit, A technological effect modeling on complex turbomachinery applications with an overset grid numerical method, Journal of Turbomachinery, vol.136, issue.10, p.101005, 2014.

K. S. Chana, M. A. Hilditch, A. , and J. , An investigation of the effects of film cooling in a high-pressure aeroengine turbine stage, ASME Turbo Expo, pp.591-601, 2005.

K. S. Chana, T. Povey, and T. V. Jones, Heat transfer and aerodynamics of an intermediate pressure nozzle guide vane with and without inlet temperature non-uniformity, 2003.

A. In and . Expo, International Joint Power Generation Conference, pp.263-271, 2003.

K. S. Chana, U. K. Singh, and T. Povey, Turbine heat transfer and aerodynamic measurements and predictions for a 1.5 stage configuration, ASME Turbo Expo, pp.825-832, 2004.

S. Chemin, Etude des interactions thermiques fluide-structure par un couplage de codes de calcul, 2006.

D. R. Clarke, M. Oechsner, and N. P. Padture, Thermal-barrier coatings for more efficient gas-turbine engines, MRS bulletin, vol.37, issue.10, pp.891-898, 2012.

S. M. Coulthard, R. J. Volino, and K. A. Flack, Effect of jet pulsing on film cooling-part i : effectiveness and flow-field temperature results, 2007.

J. Cousteix, École nationale supérieur de l'aéronautique et de l'espace, 2001.

K. Cragol, Transfert de chaleur a une paroi soumise a une onde de choc, ONERA, 1961.

. Cwipi, , 2003.

S. L. Dixon and C. Hall, Fluid mechanics and thermodynamics of turbomachinery, 2013.

J. Doorly and M. Oldfield, The theory of advanced multi-layer thin film heat transfer gauges. International journal of heat and mass transfer, vol.30, pp.1159-1168, 1987.

E. Dorignac, J. Vullierme, M. Broussely, C. Foulon, and M. Mokkadem, Experimental heat transfer on the windward surface of a perforated flat plate, International journal of thermal sciences, vol.44, issue.9, pp.885-893, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00017279

E. Dorignac, J. Vullierme, and B. Petre, Study of the influence of the number of holes rows on the convective heat transfer in the case of full coverage film cooling etude de l'influence du nombre derangées de trous sur les échanges convectifs dans le cas du refroidissement par multiperforation, International journal of heat and mass transfer, vol.46, issue.18, pp.3477-3496, 2003.

F. Duchaine, A. Corpron, L. Pons, V. Moureau, F. Nicoud et al., Development and assessment of a coupled strategy for conjugate heat transfer with large eddy simulation : application to a cooled turbine blade, International Journal of Heat and Fluid Flow, vol.30, issue.6, pp.1129-1141, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00803384

F. Duchaine, S. Jauré, D. Poitou, E. Quémerais, G. Staffelbach et al., Analysis of high performance conjugate heat transfer with the openpalm coupler, Computational Science & Discovery, vol.8, issue.1, p.15003, 2015.

F. Duchaine, S. Mendez, F. Nicoud, A. Corpron, V. Moureau et al., Coupling heat transfer solvers and large eddy simulations for combustion applications, Proceedings of the Summer Program, vol.6, pp.113-126, 2008.

J. Dunham, Cfd validation for propulsion system components (la validation cfd des organes des propulseurs), ADVISORY GROUP FOR AEROSPACE RESEARCH AND DEVELOPMENT NEUILLY-SUR-SEINE, 1998.

L. A. El-gabry and R. B. Rivir, Effect of pulsed film cooling on leading edge film effectiveness, Journal of Turbomachinery, vol.134, issue.4, 2012.

R. El-khoury, Development and validation of coupling methods for the modelling of thermal systems, 2015.

R. R. El-khoury, M. Errera, K. El-khoury, and M. Nemer, Efficiency of coupling schemes for the treatment of steady state fluid-structure thermal interactions, International Journal of Thermal Sciences, vol.115, pp.225-235, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01475269

J. Erdos, E. Alzner, and W. Mcnally, Numerical solution of periodic transonic flow through a fan stage, AIAA journal, vol.15, issue.11, pp.1559-1568, 1977.

A. Ern and J. Guermond, Eléments finis : théorie, applications, mise en oeuvre, vol.36, 2002.

M. Errera and S. Chemin, Optimal solutions of numerical interface conditions in fluid-structure thermal analysis, Journal of Computational Physics, vol.245, pp.431-455, 2013.

M. Errera and F. Duchaine, Comparative study of coupling coefficients in dirichletrobin procedure for fluid-structure aerothermal simulations, Journal of Computational Physics, vol.312, pp.218-234, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01413206

M. Errera, M. Lazareff, J. Garaud, T. Soubrié, C. Douta et al., A coupling approach to modeling heat transfer during a full transient flight cycle, International Journal of Heat and Mass Transfer, vol.110, pp.587-605, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01879586

M. Errera, R. Moretti, R. Salem, Y. Bachelier, T. Arrivé et al., A single stable scheme for steady conjugate heat transfer problems, Journal of Computational Physics, vol.394, pp.491-502, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02502271

M. Errera and G. Turpin, Temporal multiscale strategies for conjugate heat transfer problems, Journal of Coupled Systems and Multiscale Dynamics, vol.1, issue.1, pp.89-98, 2013.

C. Felippa and K. Park, Staggered transient analysis procedures for coupled mechanical systems : formulation, Computer Methods in Applied Mechanics and Engineering, vol.24, issue.1, pp.61-111, 1980.

R. Fransen, E. Collado, F. Duchaine, N. Gourdain, L. Gicquel et al., Comparison of rans and les in high pressure turbines, 2011.

J. Garaud, Développement de méthodes de couplage aéro-thermo-mécanique pour la prédiction d'instabilités dans les structures aérospatiales chaudes, 2008.

G. Gerolymos, G. Michon, and J. Neubauer, Analysis and application of chorochronic periodicity in turbomachinery rotor/stator interaction computations, Journal of propulsion and power, vol.18, issue.6, pp.1139-1152, 2002.

M. Giles, Stability analysis of numerical interface conditions in uid-structure thermal analysis, International Journal of Numerical Methods in Fluids, 1997.

R. Godunov, The theory of difference schemmes -An introduction, 1964.

J. Gottlieb, R. Davis, C. , and J. , Conjugate rotor-stator interaction procedure for film-cooled turbine sections, 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, p.497, 2011.

D. Griffini, M. Insinna, S. Salvadori, and F. Martelli, Clocking effects of inlet nonuniformities in a fully cooled high-pressure vane : A conjugate heat transfer analysis, vol.138, p.21006, 2016.

. Bibliographie,

B. Gustafsson, On the implementation of boundary conditions for the method of lines, BIT Numerical Mathematics, vol.38, issue.2, pp.293-314, 1998.

B. Gustafsson, The godunov-ryabenkii condition : The beginning of a new stability theory, Godunov Methods, pp.425-443, 2001.

B. Gustafsson, H. Kreiss, and A. Sundström, Stability theory of difference approximations for mixed initial boundary value problems. ii. Mathematics of Computation, pp.649-686, 1972.

A. Harten, On a class of high resolution total-variation-stable finite-difference schemes, SIAM Journal on Numerical Analysis, vol.21, issue.1, pp.1-23, 1984.

A. Harten and S. Osher, Uniformly high-order accurate nonoscillatory schemes. i, SIAM Journal on Numerical Analysis, vol.24, issue.2, pp.279-309, 1987.

L. He and M. Fadl, Multi-scale time integration for transient conjugate heat transfer, International Journal for Numerical Methods in Fluids, vol.83, issue.12, pp.887-904, 2017.

L. He and M. Oldfield, Unsteady conjugate heat transfer modeling, Journal of turbomachinery, vol.133, issue.3, p.31022, 2011.

M. Heil, An efficient solver for the fully coupled solution of large-displacement fluid-structure interaction problems, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.1-2, pp.1-23, 2004.

W. D. Henshaw and K. K. Chand, A composite grid solver for conjugate heat transfer in fluid-structure systems, Journal of Computational Physics, vol.228, issue.10, pp.3708-3741, 2009.

T. Hildebrandt, J. Ettrich, M. Kluge, M. Swoboda, A. Keskin et al., Unsteady 3D Navier-Stokes Calculation of a Film-Cooled Turbine Stage with Discrete Cooling Hole, 2006.

T. Hildebrandt, W. Ganzert, and L. Fottner, Systematic experimental and numerical investigations on the aerothermodynamics of a film cooled turbine cascade with variation of the cooling hole shape : Part ii-numerical approach, ASME Turbo Expo, pp.3-4, 2000.

C. Hirsch, Numerical computation of internal and external flows : The fundamentals of computational fluid dynamics, 2007.

B. Hübner, E. Walhorn, and D. Dinkler, A monolithic approach to fluid-structure interaction using space-time finite elements, Computer methods in applied mechanics and engineering, vol.193, pp.2087-2104, 2004.

H. Iacovides and M. Raisee, Recent progress in the computation of flow and heat transfer in internal cooling passages of turbine blades, International Journal of Heat and Fluid Flow, vol.20, issue.3, pp.320-328, 1999.

M. Insinna, D. Griffini, S. Salvadori, and F. Martelli, Conjugate heat transfer analysis of a film cooled high-pressure turbine vane under realistic combustor exit flow conditions, Turbine Technical Conference and Exposition, pp.5-11, 2014.

M. Insinna, D. Griffini, S. Salvadori, and F. Martelli, Film cooling performance in a transonic high-pressure vane : decoupled simulation and conjugate heat transfer analysis, Energy Procedia, vol.45, pp.1126-1135, 2014.

A. Jameson, Solution of the euler equations for two dimensional transonic flow by a multigrid method, Applied mathematics and computation, vol.13, issue.3-4, pp.327-355, 1983.

A. Jameson, W. Schmidt, and E. Turkel, Numerical solution of the euler equations by finite volume methods using runge kutta time stepping schemes, 14th fluid and plasma dynamics conference, p.1259, 1981.

A. Jameson and E. Turkel, Implicit schemes and lu decompositions. Mathematics of Computation, vol.37, pp.385-397, 1981.

A. Jameson and S. Yoon, Lu implicit schemes with multiple grids for the euler equations, 24th Aerospace Sciences Meeting, p.105, 1986.

S. Jaure, F. Duchaine, G. Staffelbach, and L. Gicquel, Massively parallel conjugate heat transfer methods relying on large eddy simulation applied to an aeronautical combustor, Computational Science & Discovery, vol.6, issue.1, p.15008, 2013.

T. Jones, D. Schultz, and A. Hendley, On the flow in an isentropic light piston tunnel, 1973.

O. Joshi and P. Leyland, Stability analysis of a partitioned fluid-structure thermal coupling algorithm, Journal of Thermophysics and Heat Transfer, vol.28, issue.1, pp.59-67, 2014.

V. Kazemi-kamyab, A. Van-zuijlen, and H. Bijl, Accuracy and stability analysis of a second-order time-accurate loosely coupled partitioned algorithm for transient conjugate heat transfer problems, International Journal for Numerical Methods in Fluids, vol.74, issue.2, pp.113-133, 2014.

B. Khanal, L. He, J. Northall, A. , and P. , Analysis of radial migration of hot-streak in swirling flow through high-pressure turbine stage, vol.135, p.41005, 2013.

C. Koren, R. Vicquelin, and O. Gicquel, Self-adaptive coupling frequency for unsteady coupled conjugate heat transfer simulations, International Journal of Thermal Sciences, vol.118, pp.340-354, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01744477

H. Kreiss, Initial boundary value problems for hyperbolic systems, Communications on Pure and Applied Mathematics, vol.23, issue.3, pp.277-298, 1970.

H. O. Kreiss and L. Wu, On the stability definition of difference approximations for the initial boundary value problem, Applied Numerical Mathematics, vol.12, issue.1-3, pp.213-227, 1993.

K. Kusterer, T. Hagedorn, D. Bohn, T. Sugimoto, and R. Tanaka, Improvement of a film-cooled blade by application of the conjugate calculation technique, Journal of turbomachinery, vol.128, issue.3, pp.572-578, 2006.

K. Kusterer, G. Lin, T. Sugimoto, D. Bohn, R. Tanaka et al., Novel gas turbine blade leading edge cooling configuration using advanced double swirl chambers, ASME Turbo Expo 2015 : Turbine Technical Conference and Exposition, pp.5-11, 2015.

N. Lantos, S. Plot, and S. Heib, , 2014.

S. Lee, K. Yee, and D. Rhee, Optimum arrangement of film cooling holes considering the manufacturing tolerance, Journal of Propulsion and Power, 2017.

T. Lieuwen, Combustion driven oscillations in gas turbines, Turbomachinery International, vol.44, issue.1, pp.16-18, 2003.

A. Luikov, Conjugate convective heat transfer problems, International Journal of Heat and Mass Transfer, vol.17, issue.2, pp.257-265, 1974.

A. Luikov, V. Aleksashenko, A. , and A. , Analytical methods of solution of conjugated problems in convective heat transfer, International Journal of Heat and Mass Transfer, vol.14, issue.8, pp.1047-1056, 1971.

A. Luikov, T. Perelman, R. Levitin, and L. Gdalevich, Heat transfer from a plate in a compressible gas flow, International Journal of Heat and Mass Transfer, vol.13, issue.8, pp.1261-1270, 1970.

R. Maffulli and L. He, Wall temperature effects on heat transfer coefficient, ASME Turbo Expo 2013 : Turbine Technical Conference and Exposition, pp.3-14, 2013.

A. Mikolajczak and J. Kerrebrock, Intra-stator transport of rotor wakes and its effect on compressor performance, J. Eng. for Power, p.359, 1970.

A. Montenay, Analyse Numérique de l'Aérothermique d'Aubages et de Cavités de Turboréacteur, 2000.

A. Montenay, L. Paté, and J. Duboué, Conjugate heat transfer analysis of an engine internal cavity, ASME Turbo Expo, 2000.

R. Moretti, M. Errera, V. Couaillier, and F. Feyel, Stability, convergence and optimization of interface treatments in weak and strong thermal fluid-structure interaction, International Journal of Thermal Sciences, vol.126, pp.23-37, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01789013

M. Nguyen, M. Errera, O. Labbé, R. Moretti, F. Renac et al., , 2020.

, Adaptive interface treatment for aerothermal coupling using a discontinuous galerkin method, International Journal of Thermal Sciences, vol.149, p.106208

I. Ozer and S. Friedrich, Experimental Methods of Shock Wave Research, 2016.

D. Papadogiannis, Coupled Large Eddy Simulations of combustion chamber-turbine interactions, 2015.

T. Perelman, On conjugated problems of heat transfer, International Journal of Heat and Mass Transfer, vol.3, issue.4, pp.293-303, 1961.

S. Piperno, C. Farhat, and B. Larrouturou, Partitioned procedures for the transient solution of coupled aroelastic problems part i : Model problem, theory and two-dimensional application, Computer methods in applied mechanics and engineering, vol.124, issue.1-2, pp.79-112, 1995.

I. Qureshi, A. Beretta, and T. Povey, Effect of simulated combustor temperature nonuniformity on hp vane and end wall heat transfer : An experimental and computational investigation, Journal of Engineering for Gas Turbines and Power, vol.133, issue.3, p.31901, 2011.

I. Qureshi, A. D. Smith, and T. Povey, Hp vane aerodynamics and heat transfer in the presence of aggressive inlet swirl, Journal of Turbomachinery, vol.135, issue.2, p.21040, 2013.

N. Rakotomalala, Simulation numérique de l'écaillage des barrières thermiques avec couplage thermo-mécanique, 2014.

D. Rhee, Y. S. Kang, B. J. Cha, and S. Lee, Overall cooling effectiveness measurements on pressure side surface of the nozzle guide vane with optimized film cooling hole arrangements, ASME Turbo Expo 2017 : Turbomachinery Technical Conference and Exposition, pp.5-10, 2017.

B. Roe, R. Jaiman, A. Haselbacher, and P. Geubelle, Combined interface boundary condition method for coupled thermal simulations, International journal for numerical methods in fluids, vol.57, issue.3, pp.329-354, 2008.

P. L. Roe, Approximate riemann solvers, parameter vectors, and difference schemes, Journal of computational physics, vol.43, issue.2, pp.357-372, 1981.

F. Roux and J. Garaud, Domain decomposition methodology with robin interface matching conditions for solving strongly coupled fluid-structure problems, International Journal for Multiscale Computational Engineering, vol.7, issue.1, 2009.

R. Salem, M. Errera, M. , and J. , Adaptive diffusive time-step in conjugate heat transfer interface conditions for thermal-barrier-coated applications, International Journal of Thermal Sciences, vol.145, p.106048, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02910888

S. Salvadori, F. Montomoli, F. Martelli, P. Adami, K. Chana et al., , 2011.

, Aerothermal study of the unsteady flow field in a transonic gas turbine with inlet temperature distortions, Journal of Turbomachinery, vol.133, issue.3, p.31030

S. Salvadori, G. Riccio, M. Insinna, and F. Martelli, Analysis of combustor/vane interaction with decoupled and loosely coupled approaches, ASME Turbo Expo 2012 : Turbine Technical Conference and Exposition, pp.2641-2652, 2012.

C. Scagnetti, Mesure des flux de chaleur pendant la phase d'allumage d'un propergol solide, ONERA, 1968.

D. L. Schultz and T. Jones, Heat-transfer measurements in short-duration hypersonic facilities, ADVISORY GROUP FOR AEROSPACE RESEARCH AND DEVELOPMENT, 1973.

U. Schulz, C. Leyens, K. Fritscher, M. Peters, B. Saruhan-brings et al., Some recent trends in research and technology of advanced thermal barrier coatings, Aerospace Science and technology, vol.7, issue.1, pp.73-80, 2003.
URL : https://hal.archives-ouvertes.fr/hal-01740659

H. Seo, J. Leea, and P. Ligrani, The effect of injection hole length on film cooling with bulk flow pulsations, International Journal of Heat and Mass Transfer, vol.41, issue.22, pp.3515-3528, 1998.

S. Simone, F. Montomoli, F. Martelli, K. S. Chana, I. Qureshi et al., Analysis on the effect of a nonuniform inlet profile on heat transfer and fluid flow in turbine stages, vol.134, p.11012, 2012.

P. Spalart and S. Allmaras, A One-Equation Turbulence Model for Aerodynamic Flows, La Recherche Aérospatiale, vol.1, pp.5-21, 1994.

P. R. Spalart, Strategies for turbulence modelling and simulations, International Journal of Heat and Fluid Flow, vol.21, issue.3, pp.252-263, 2000.

J. L. Steger and R. Warming, Flux vector splitting of the inviscid gasdynamic equations with application to finite-difference methods, Journal of computational physics, vol.40, issue.2, pp.263-293, 1981.

K. L. Suder and M. L. Celestina, Experimental and computational investigation of the tip clearance flow in a transonic axial compressor rotor, ASME 1994 International Gas Turbine and Aeroengine Congress and Exposition, pp.1-01, 1994.

R. Taylor and O. C. Zienkiewicz, The finite element method, 2013.

L. N. Trefethen, Group velocity interpretation of the stability theory of gustafsson, kreiss, and sundström, Journal of Computational Physics, vol.49, issue.2, pp.199-217, 1983.

T. Verstraete and S. Scholl, Stability analysis of partitioned methods for predicting conjugate heat transfer, International Journal of Heat and Mass Transfer, vol.101, pp.852-869, 2016.

T. Verstraete and R. Van-den-braembussche, A novel method for the computation of conjugate heat transfer with coupled solvers, ICHMT DIGITAL LIBRARY ONLINE, 2009.

. Bibliographie,

C. Weber, Développement de méthodes implicites pour les équations de Navier-Stokes moyennées et la simulation des grandes échelles : Application à l'aérodynamique externe, 1998.

F. ;. Wlassow, . Ecole, and . De-lyon--lmfa, Analyse instationnaire aérothermique d'un étage de turbine avec transport de points chauds ; application à la maîtrise des performances des aubages -th/cfd/12/58, 2012.

F. Wlassow, F. Duchaine, G. Leroy, and N. Gourdain, 3d simulation of coupled fluid flow and solid heat conduction for the calculation of blade wall temperature in a turbine stage, pp.723-734, 2010.

F. Wlassow, F. Leboeuf, G. Leroy, N. Gourdain, and G. N. Boum, Numerical investigation of high-pressure turbine environment effects on the prediction of aerothermal performances, ASME Turbo Expo 2012 : Turbine Technical Conference and Exposition, pp.1915-1928, 2012.

S. Yoon, An LU-SSOR scheme for the Euler and Navier-Stokes equations, 1986.

. Zset, , 1982.

J. Han, Fundamental gas turbine heat transfer, J. Therm. Sci. Eng. Appl, vol.5, issue.2, p.21007, 2013.

D. E. Bohn and C. Tummers, Numerical 3-d conjugate flow and heat transfer investigation of a transonic convection-cooled thermal barrier coated turbine guide vane with reduced cooling fluid mass flow, ASME Turbo Expo, Collocated with the 2003 International Joint Power Generation Conference, pp.279-286, 2003.

M. Insinna, D. Griffini, S. Salvadori, and F. Martelli, Film cooling performance in a transonic high-pressure vane: decoupled simulation and conjugate heat transfer analysis, Energy Procedia, vol.45, pp.1126-1135, 2014.

K. L. Burlet and D. J. Dorney, Influence of 3d hot streaks on turbine heat transfer, Int. J. Turbo Jet Engines, vol.14, issue.3, pp.123-132, 1997.

D. J. Dorney, R. L. Davis, D. E. Edwards, and N. K. Madavan, Unsteady analysis of hot streak migration in a turbine stage, J. Propuls. Power, vol.8, issue.2, pp.520-529, 1992.

T. Perelman, On conjugated problems of heat transfer, Int. J. Heat Mass Transf, vol.3, issue.4, pp.293-303, 1961.

A. Luikov, T. Perelman, R. Levitin, and L. Gdalevich, Heat transfer from a plate in a compressible gas flow, Int. J. Heat Mass Transf, vol.13, issue.8, pp.1261-1270, 1970.

M. Giles, Stability analysis of numerical interface conditions in uid-structure thermal analysis, Int. J. Numer. Methods Fluids, vol.25, issue.4, 1997.

B. Roe, R. Jaiman, A. Haselbacher, and P. Geubelle, Combined interface boundary condition method for coupled thermal simulations, Int. J. Numer. Methods Fluids, vol.57, issue.3, pp.329-354, 2008.

W. D. Henshaw and K. K. Chand, A composite grid solver for conjugate heat transfer in fluid-structure systems, J. Comput. Phys, vol.228, issue.10, pp.3708-3741, 2009.

V. Kazemi-kamyab, A. Van-zuijlen, and H. Bijl, Accuracy and stability analysis of a second-order time-accurate loosely coupled partitioned algorithm for transient conjugate heat transfer problems, Int. J. Numer. Methods Fluids, vol.74, issue.2, pp.113-133, 2014.

O. Joshi and P. Leyland, Stability analysis of a partitioned fluid-structure thermal coupling algorithm, J. Thermophys. Heat Transf, vol.28, issue.1, pp.59-67, 2014.

J. Lindström and J. Nordström, A stable and high-order accurate conjugate heat transfer problem, J. Comput. Phys, vol.229, issue.14, pp.5440-5456, 2010.

L. He and M. Fadl, Multi-scale time integration for transient conjugate heat transfer, Int. J. Numer. Methods Fluids, vol.83, issue.12, pp.887-904, 2017.

L. He and M. Oldfield, Unsteady conjugate heat transfer modeling, J. Turbomach, vol.133, issue.3, p.31022, 2011.

T. Verstraete and R. , Van den Braembussche, A novel method for the computation of conjugate heat transfer with coupled solvers, 2009.

B. Gustafsson, On the implementation of boundary conditions for the method of lines, BIT Numer. Math, vol.38, issue.2, pp.293-314, 1998.

M. Errera and S. Chemin, Optimal solutions of numerical interface conditions in fluid-structure thermal analysis, J. Comput. Phys, vol.245, pp.431-455, 2013.

M. Errera and F. Duchaine, Comparative study of coupling coefficients in dirichlet-robin procedure for fluid-structure aerothermal simulations, J. Comput. Phys, vol.312, pp.218-234, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01413206

M. Errera and G. Turpin, Temporal multiscale strategies for conjugate heat transfer problems, J. Coupled Syst. Multiscale Dyn, vol.1, issue.1, pp.89-98, 2013.

R. R. Khoury, M. Errera, K. E. Khoury, and M. Nemer, Efficiency of coupling schemes for the treatment of steady state fluid-structure thermal interactions, Int. J. Therm. Sci, vol.115, pp.225-235, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01475269

M. Errera, R. Moretti, R. Salem, Y. Bachelier, T. Arrivé et al., A single stable scheme for steady conjugate heat transfer problems, J. Comput. Phys, vol.394, pp.491-502, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02502271

R. Moretti, M. Errera, V. Couaillier, and F. , Feyel, Stability, convergence and optimization of interface treatments in weak and strong thermal fluid-structure interaction, Int. J. Therm. Sci, vol.126, pp.23-37, 2018.

M. Heil, An efficient solver for the fully coupled solution of large-displacement fluid-structure interaction problems, Comput. Methods Appl. Mech. Eng, vol.193, issue.1-2, pp.1-23, 2004.

B. Hübner, E. Walhorn, and D. Dinkler, A monolithic approach to fluid-structure interaction using space-time finite elements, Comput. Methods Appl. Mech. Eng, vol.193, pp.2087-2104, 2004.

J. Hron and S. Turek, A monolithic fem/multigrid solver for an ale formulation of fluidstructure interaction with applications in biomechanics, Fluid-structure Interaction, pp.146-170, 2006.

S. Piperno, C. Farhat, and B. Larrouturou, Partitioned procedures for the transient solution of coupled aroelastic problems part i: model problem, theory and two-dimensional application, Comput. Methods Appl. Mech. Eng, vol.124, issue.1-2, pp.79-112, 1995.

C. Felippa and K. Park, Staggered transient analysis procedures for coupled mechanical systems: formulation, Comput. Methods Appl. Mech. Eng, vol.24, issue.1, pp.61-111, 1980.

R. Jaiman, P. Geubelle, E. Loth, and X. Jiao, Stable and accurate loosely-coupled scheme for unsteady fluid-structure interaction, 45th AIAA Aerospace Sciences Meeting and Exhibit, p.334, 2007.

L. Cambier, S. Heib, and S. Plot, The onera elsa cfd software: input from research and feedback from industry, Mech. Ind, vol.14, issue.3, pp.159-174, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01293795

L. Cambier, V. Gleize, and M. Julien, Verification and validation of the onera elsa flow solver on rans benchmarks, 52nd Aerospace Sciences Meeting, p.239, 2014.

F. Duchaine, S. Mendez, F. Nicoud, A. Corpron, V. Moureau et al., Coupling heat transfer solvers and large eddy simulations for combustion applications, Proceedings of the Summer Program, vol.6, pp.113-126, 2008.

R. Salem, International Journal of Thermal Sciences, vol.145, p.106048, 2019.