. Mouna-ben, H. Salem, G. Hussein, Y. Aiche, P. Haddab et al., Characterization of bistable mechanisms for microrobotics and mesorobotics, Conférences internationales avec comité de lecture et édition des actes, pp.1-13, 2019.

. Mouna-ben, G. Salem, L. Aiche, P. Rubbert, and . Renaud, and Yassine Haddab. Design of a Microbiota Sampling Capsule using 3D-Printed Bistable Mechanism, ternational Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp.4868-4871, 2018.

Y. Haddab, G. Aiche, H. Hussein, M. B. Salem, P. Lutz et al., Mechanical Bistable Structures for Microrobotics and Mesorobotics from Microfabrication to Additive Manufacturing. International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS), pp.1-6, 2018.
URL : https://hal.archives-ouvertes.fr/lirmm-02006548

. Mouna-ben, G. Salem, Y. Aiche, L. Haddab, P. Rubbert et al., Additive Manufacturing of a Bistable Mechanism Using Fused Deposition Modeling : Experimental and Theoretical Characterization, 43rd Mechanisms and Robotics Conference, IDETC/CIE, 2019.

, LISTE DES PUBLICATIONS Conférences nationales sans actes

G. Aiche, J. Alcaraz, T. Alonso, A. Bakri, M. B. Salem et al., Design of Ingestible Intestinal Content Samplers, Surgetica, pp.243-245, 2017.

. Mouna-ben, G. Salem, L. Aiche, T. Rubbert, P. Soranzo et al., Communication et publications diverses : 8th Summer School on Surgical Robotics, présentation de poster, pp.131-133, 2017.

, Medical Robotics Day, 2018.

, Summer School on Surgical Robotics, 2019.

É. Larousse, Encyclopédie Larousse en ligne -iléon. Cité pages 1 and 19

M. Quirini, J. Robert, A. Webster, P. Menciassi, and . Dario, Design of a pill-sized 12-legged endoscopic capsule robot, IEEE International Conference on Robotics and Automation, p.23, 2007.

A. Karargyris and A. Koulaouzidis, Odocapsule next-generation wireless capsule endoscopy with accurate lesion localization and video stabilization capabilities, IEEE Transactions on Biomedical Engineering, vol.62, issue.1, pp.1-24, 2015.

H. Liang, Y. Guan, Z. Xiao, C. Hu, and Z. Liu, A screw propelling capsule robot, 2011 IEEE International Conference on Information and Automation, p.24, 2011.

J. Gao and G. Yan, Locomotion analysis of an inchworm-like capsule robot in the intestinal tract, IEEE Transactions on Biomedical Engineering, vol.63, issue.2, p.25, 2016.

J. Kwon, S. Park, B. Kim, and J. Park, Bio-material property measurement system for locomotive mechanism in gastro-intestinal tract, IEEE International Conference on Robotics and Automation, pp.1303-1308, 2005.

L. Kim, C. Sai, S. Tang, and . Yoo, Prototype modular capsule robots for capsule endoscopies, The International Conference on Control, Automation and Systems, pp.350-354, 2013.

. Bibliographie,

F. Carpi, S. Galbiati, and A. Carpi, Controlled navigation of endoscopic capsules : Concept and preliminary experimental investigations, IEEE Transactions on Biomedical Engineering, vol.54, issue.11, pp.2028-2036, 2007.

M. Simi, P. Valdastri, C. Quaglia, A. Menciassi, and P. Dario, Design, fabrication, and testing of a capsule with hybrid locomotion for gastrointestinal tract exploration, ASME Transactions on Mechatronics, vol.15, issue.2, pp.170-180, 2010.

S. Yim and M. Sitti, Design and analysis of a magnetically actuated and compliant capsule endoscopic robot, p.31, 2011.

H. David, . Gracias-sehyuk, E. Yim, M. Gultepe, and . Sitti, Biopsy using a Magnetic Capsule Endoscope Carrying, Releasing, and Retrieving Untethered Microgrippers, IEEE Transactions on Biomedical Engineering, vol.61, issue.2, p.31, 2014.

P. Stephen, T. G. Woods, and . Constandinou, Wireless capsule endoscope for targeted drug delivery : mechanics and design considerations, IEEE transactions on biomedical engineering, vol.60, issue.4, p.32, 2013.

P. Li, C. Kreikemeier-bower, W. Xie, V. Kothari, and B. S. Terry, Design of a Wireless Medical Capsule for Measuring the Contact Pressure Between a Capsule and the Small Intestine, Journal of Biomechanical Engineering, vol.139, issue.5, p.32, 2017.

H. Howard, H. Gu, and . Gu, Intestinal fluid sampler, p.34, 1999.

A. Sprenkels, A. Jenneboer, K. Venema, A. Van-den, W. D. Berg et al., Sampling device for in vivo sampling of liquids from the gastrointestinal tract, process for the production thereof and mould or mask for use in the production process, 2007.

Y. Amoako-tuffour, L. Mitchell, N. Jones, A. Shalabi, and . Labbé, Ingestible gastrointestinal sampling devices : state-of-the-art and future directions, Critical Reviews in Biomedical Engineering, vol.42, issue.1, 2014.

, Device for intestinal fluid sampling, 2017. FR1760069. Cité pages 2, 13, vol.37, p.57

J. Qiu, An Electrothermally-Actuated Bistable MEMS Relay for Power Applications, 2003.

R. Sender, S. Fuchs, and R. Milo, Revised estimates for the number of human and bacteria cells in the body, PLoS biology, vol.14, issue.8, p.19, 2016.

L. June, . Round, and . Sarkis-k-mazmanian, The gut microbiota shapes intestinal immune responses during health and disease, Nature reviews immunology, vol.9, issue.5, p.19, 2009.

V. Tremaroli and F. Bäckhed, Functional interactions between the gut microbiota and host metabolism, Nature, vol.489, issue.7415, p.19, 2012.

J. Qin, Y. Li, Z. Cai, S. Li, J. Zhu et al., A metagenome-wide association study of gut microbiota in type 2 diabetes, Nature, vol.490, issue.7418, p.19, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01204262

A. Swidsinski, A. Ladhoff, A. Pernthaler, S. Swidsinski, V. Loening-baucke et al., Mucosal flora in inflammatory bowel disease, Gastroenterology, vol.122, issue.1, pp.44-54, 2002.

P. Eric, H. Widmaier, K. T. Raff, and . Strang, Physiologie humaine : les mécanismes du fonctionnement de l'organisme. Chenelière éducation, 2013.

H. David, A. N. Alpers, N. Kalloo, C. Kaplowitz, D. W. Owyang et al., Textbook of gastroenterology, p.19, 2011.

J. K. Dibaise, C. R. Parrish, and J. S. Thompson, Short Bowel Syndrome : Practical Approach to Management, 2017.

S. Wendy and . Garrett, Cancer and the microbiota, Science, vol.348, issue.6230, pp.80-86, 2015.

P. Louis, Does the human gut microbiota contribute to the etiology of autism spectrum disorders ?, p.20, 2012.

F. Lv, S. Chen, L. Wang, R. Jiang, H. Tian et al., The role of microbiota in the pathogenesis of schizophrenia and major depressive disorder and the possibility of targeting microbiota as a treatment option, Oncotarget, vol.8, issue.59, p.100899, 2017.

M. Valles-colomer, G. Falony, Y. Darzi, E. F. Tigchelaar, J. Wang et al., The neuroactive potential of the human gut microbiota in quality of life and depression, Nature Microbiology, vol.4, issue.4, p.623, 2019.

M. Panek, H. Paljetak, A. Bare?i?, M. Peri?, M. Matija?i? et al., Methodology challenges in studying human gut microbiota-effects of collection, storage, dna extraction and next generation sequencing technologies, Scientific reports, vol.8, issue.1, p.5143, 2018.

J. Andrew, N. L. Macpherson, and . Harris, Interactions between commensal intestinal bacteria and the immune system, Nature Reviews Immunology, vol.4, issue.6, p.478, 2004.

M. E. Riccioni, R. Urgesi, R. Cianci, A. Bizzotto, C. Spada et al., Colon capsule endoscopy : Advantages, limitations and expectations. which novelties ?, World journal of gastrointestinal endoscopy, vol.4, issue.4, p.99, 2012.

G. Iddan, G. Meron, A. Glukhovsky, and P. Swain, Wireless capsule endoscopy, Nature, vol.405, issue.6785, p.417, 2000.

N. Schoofs, J. Deviere, and A. Van-gossum, PillCam colon capsule endoscopy compared with colonoscopy for colorectal tumor diagnosis : a prospective pilot study, Endoscopy, vol.38, issue.10, p.22, 2006.

P. Valdastri, R. J. Webster, I. , C. Quaglia, M. Quirini et al., A New Mechanism for Mesoscale Legged Locomotion in Compliant Tubular Environments, IEEE Transactions on Robotics, vol.25, issue.5, p.24, 2009.

H. Park, S. Park, E. Yoon, B. Kim, J. Park et al., Paddling based Microrobot for Capsule Endoscopes, IEEE International Conference on Robotics and Automation, p.24, 2007.

S. Yang, K. Park, J. Kim, T. S. Kim, I. Cho et al., Autonomous locomotion of capsule endoscope in gastrointestinal tract, IEEE Engineering in Medicine and Biology Society, pp.6659-6663

S. Cheung, M. E. Karagozler, and M. Sitti, A new endoscopic microcapsule robot using beetle inspired microfibrillar adhesives, ASME International Conference on Advanced Intelligent Mechatronics, pp.551-557, 2005.

D. Hosokawa, T. Ishikawa, H. Morikawa, Y. Imai, and T. Yamaguchi, A Locomotive System Mimicking Pedal Locomotion of Snails for the Capsule Endoscope, The JSME Conference on Frontiers in Bioengineering, vol.19, pp.58-59, 2008.

B. Kim, S. Lee, J. H. Park, and J. Park, Design and fabrication of a locomotive mechanism for capsule-type endoscopes using shape memory alloys (SMAs), ASME Transactions on Mechatronics, vol.10, issue.1, pp.77-86, 2005.

C. Dizon-john-ryan, A. H. Espera, Q. Chen, and R. C. Advincula, Mechanical characterization of 3D-printed polymers, Additive Manufacturing, vol.20, p.38, 2018.

D. Rosen, I. Gibson, and B. Stucker, Additive manufacturing : Rapid prototyping to direct digital manufacturing, 2010.

T. Huang, S. Wang, and K. He, Quality control for fused deposition modeling based additive manufacturing : Current research and future trends, International Conference on Reliability Systems Engineering, p.38, 2015.

G. Garechana, R. Rio-belver, I. Bildosola, and E. Cilleruelo, A method for the detection and characterization of technology fronts : Analysis of the dynamics of technological change in 3D printing technology, PLOS ONE, vol.14, 2019.

K. Chee-kai-chua, C. Leong, and . Lim, Rapid Prototyping : Principles and Applications, 2010.

P. W. Ferry, J. Melchels, D. W. Feijen, and . Grijpma, A review on stereolithography and its applications in biomedical engineering, Biomaterials, vol.31, issue.24, p.39, 2010.

D. P. Sarment, K. Al-shammari, and C. E. Kazor, Stereolithographic surgical templates for placement of dental implants in complex cases, The International Journal of Periodontics & Restorative Dentistry, vol.23, issue.3, p.39, 2003.

M. Thomas, D. Binder, G. Moertl, G. Mundigler, M. Rehak et al., Stereolithographic biomodeling to create tangible hard copies of cardiac structures from echocardiographic data : In vitro and in vivo validation, Journal of the American College of Cardiology, vol.35, issue.1, p.39, 2000.

S. Leuders, M. Thã?ne, A. Riemer, T. Niendorf, T. Trã?ster et al., On the mechanical behaviour of titanium alloy TiAl 6v4 manufactured by selective laser melting : Fatigue resistance and crack growth performance, International Journal of Fatigue, vol.48, pp.300-307, 2013.

. Kh-tan, . Chua, . Leong, P. Cheah, . Cheang et al., Scaffold development using selective laser sintering of polyetheretherketonehydroxyapatite biocomposite blends, Biomaterials, vol.24, issue.18, p.39, 2003.

J. Norman, R. D. Madurawe, C. M. Moore, M. A. Khan, and A. Khairuzzaman, A new chapter in pharmaceutical manufacturing : 3D-printed drug products, Advanced Drug Delivery Reviews, vol.108, p.39, 2017.

S. J. Trenfield, C. M. Madla, A. W. Basit, and S. Gaisford, Binder Jet Printing in Pharmaceutical Manufacturing, p.39, 2018.

T. D. Ngo, A. Kashani, G. Imbalzano, K. T. Nguyen, and D. Hui, Additive manufacturing (3D printing) : A review of materials, methods, applications and challenges, Composites Part B : Engineering, vol.143, p.40, 2018.

A. Bruyas, Apport de la fabrication additive multi-matériaux pour la conception robotique, p.39, 2015.

B. Zhang, X. Pei, P. Song, H. Sun, H. Li et al., Porous bioceramics produced by inkjet 3D printing : Effect of printing ink formulation on the ceramic macro and micro porous architectures control, Composites Part B : Engineering, vol.155, p.39, 2018.

J. A. Inzana, D. Olvera, S. M. Fuller, J. P. Kelly, O. A. Graeve et al., 3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration, Biomaterials, vol.35, issue.13, p.39, 2014.

J. Park, M. Lee, Y. Cho, J. H. Sung, M. Jeong et al., Effect of heat treatment on the characteristics of tool steel deposited by the directed energy deposition process, Metals and Materials International, vol.22, issue.1, pp.143-147, 2016.

I. Gibson, D. W. Rosen, and B. Stucker, Extrusion-Based Systems, Additive Manufacturing Technologies : Rapid Prototyping to Direct Digital Manufacturing, p.40, 2010.

N. Helena, . Chia, M. Benjamin, and . Wu, Recent advances in 3D printing of biomaterials, Journal of Biological Engineering, vol.9, issue.1, p.40, 2015.

O. A. Mohamed, H. Syed, J. L. Masood, and . Bhowmik, Optimization of fused deposition modeling process parameters : a review of current research and future prospects, Advances in Manufacturing, vol.3, issue.1, p.42, 2015.

K. Thrimurthulu, M. Pulak, N. Pandey, and . Reddy, Optimum part deposition orientation in fused deposition modeling, International Journal of Machine Tools and Manufacture, vol.44, issue.6, p.42, 2004.

S. Singamneni, A. Roychoudhury, O. Diegel, and B. Huang, Modeling and evaluation of curved layer fused deposition, Journal of Materials Processing Technology, vol.212, issue.1, p.42, 2012.

B. Deason, W. M. Johnson, M. Eubanks, and M. Rowell, Comparative evaluation of an open-source FDM system, Rapid Prototyping Journal, vol.20, issue.3, p.44, 2014.

S. Song, A. Wang, Q. Huang, and F. Tsung, Shape deviation modeling for fused deposition modeling processes, IEEE International Conference on Automation Science and Engineering (CASE), p.44, 2014.

D. Ahn, J. Kweon, S. Kwon, J. Song, and S. Lee, Representation of surface roughness in fused deposition modeling, Journal of Materials Processing Technology, vol.209, issue.15, p.125, 2009.

A. Boschetto, F. Giordano, and . Veniali, Surface roughness prediction in fused deposition modelling by neural networks, The International Journal of Advanced Manufacturing Technology, vol.67, issue.9, pp.2727-2742, 2013.

A. Stephen, K. Dalgarno, and J. Munguia, Quality assurance and process monitoring of fused deposition modelling made parts, 6th International Conference on Advanced Research in Virtual and Rapid Prototyping, p.44, 2014.

T. Fang, A. Mohsen, I. Jafari, A. Bakhadyrov, S. Safari et al., Online defect detection in layered manufacturing using process signature, IEEE International Conference on Systems, Man, and Cybernetics, vol.5, pp.4373-4378, 1998.

J. Santhakumar, R. Maggirwar, S. Gollapudi, N. Karthekeyan, and . Kalra, Enhancing Impact Strength of Fused Deposition Modeling Built Parts using Polycarbonate Material, Indian Journal of Science and Technology, vol.9, issue.34, 2016.

M. Domingo-espin, M. Josep, A. Puigoriol-forcada, J. Garcia-granada, S. Llumà et al., Mechanical property characterization and simulation of fused deposition modeling polycarbonate parts, Materials & Design, vol.83, p.44, 2015.

A. Alafaghani, A. Qattawi, B. Alrawi, and A. Guzman, Experimental Optimization of Fused Deposition Modelling Processing Parameters : A Design-for-Manufacturing Approach, Procedia Manufacturing, vol.10, p.44, 2017.

. Mr and . Bliss, Tablets and Capsules that Stick in the Oesophagus, Journal of the Royal College of General Practitioners, p.49, 1984.

K. S. Channer and J. P. Virjee, The Effect of Size and Shape of Tablets on Their Esophageal Transit, The Journal of Clinical Pharmacology, vol.26, issue.2, p.55, 1986.

H. Hey, . Jørgensen, H. Sørensen, T. Hasselbalch, and . Wamberg, Oesophageal transit of six commonly used tablets and capsules, BMJ, vol.285, issue.6356, p.49, 1982.

V. Sayeed, Size, Shape, and Other Physical Attributes of Generic Tablets and Capsules. U.S. Department of Health and Human Services Food and Drug Administration. Guidance for Industry, p.49, 2015.

D. E. Beasley, A. M. Koltz, J. E. Lambert, N. Fierer, and R. R. Dunn, The Evolution of Stomach Acidity and Its Relevance to the Human Microbiome, PLoS ONE, vol.10, p.51, 2015.

. Df-evans, R. Pye, A. G. Bramley, . Clark, J. D. Dyson et al., Measurement of gastrointestinal pH profiles in normal ambulant human subjects, Gut, vol.29, issue.8, p.51, 1988.

K. Samuel, Y. Lai, D. Wang, J. Wirtz, and . Hanes, Micro-and macrorheology of mucus, Advanced drug delivery reviews, vol.61, p.49, 2009.

B. Spencer and T. , Mechanical characterization of the small intestine for in vivo robotic capsule endoscope mobility, p.49, 2012.

N. Bansal, M. Sachdeva, P. Jain, P. Ranjan, and A. Arora, Anorectal manometry : current techniques and indications, Journal International Medical Sciences Academy, vol.26, issue.3, p.49, 2013.

, L'éponge nasale pva fournie par Huizhou Foryou Medical Devices Co., Ltd, p.57

S. Chesne, Identification d'efforts aux limites des poutres et plaques en flexion par méthode indirecte, vol.180, 2006.

D. Rodney and . Berg, The indigenous gastrointestinal microflora, Trends in Microbiology, vol.4, issue.11, pp.430-435, 1996.

M. Vangbo, An analytical analysis of a compressed bistable buckled beam. Sensors and Actuators A : Physical, vol.69, p.85, 1998.

H. Hussein, Contribution to digital microrobotics : modeling, design and fabrication of curved beams, U-shaped actuators and multistable microrobots, vol.80, p.87, 2015.
URL : https://hal.archives-ouvertes.fr/tel-01264742

, How Biorelevant Testing Can Help Oral Drug Development, p.117

, Biological evaluation of medical devices â?? Part 1 : Evaluation and testing within a risk management process, ISO 10993-1 :2018(en)