M. Akamatsu and E. Chevalier, Caractérisation chimique et mécanique des matériaux approvisionnés pour l'étude du comportement cyclique des aciers inoxydables austénitiques, 2001.

A. Andrieu, Mécanismes et modélisation multi-échelle de la rupture fragile trans-et intergranulaire des aciers pour Réacteurs à Eau sous Pression, en lien avec le vieillissement thermique, 2013.

F. V. Antunes, S. M. Rodrigues, R. Branco, and D. Camas, A numerical analysis of CTOD in constant amplitude fatigue crack growth, Theor. Appl. Fract. Mech, vol.85, pp.45-55, 2016.

G. Baudry and A. Pineau, Influence of strain-induced martensitic transformation on the low-cycle fatigue behavior of a stainless steel, Mater. Sci. Eng, vol.28, pp.229-242, 1977.

M. Bayerlein, H. Christ, and H. Mughrabi, Plasticity-induced martensitic transformation during cyclic deformation of AISI 304L stainless steel, Mater. Sci. Eng. A, vol.114, pp.11-16, 1989.

C. Belamri, Influence de la température (20 à 600°C) et de l'environnement (air-vide) sur le comportement en fatigue plastique d'un acier inoxydable austénitique (316L), 1986.

R. C. Boettner, Crack Nucleation and Growth in High Strain-Low Cycle Fatigue, Trans AIME, vol.233, pp.379-387, 1965.

A. Carpinteri, Shape change of surface cracks in round bars under cyclic axial loading, Int. J. Fatigue, vol.15, pp.21-26, 1993.

J. Chen, S. Takezono, K. Tao, and T. Hazawa, Application of fracture mechanics to the surface crack propagation in stainless steel at elevated temperatures, Acta Mater, vol.45, pp.2495-2500, 1997.

P. Chong-myong and S. Ji-ho, Crack growth and closure behavior of short fatigue cracks, Eng. Fract. Mech, vol.47, pp.327-343, 1994.

P. Chowdhury and H. Sehitoglu, Mechanisms of fatigue crack growth -a critical digest of theoretical developments: Fatigue Crack Growth Modelling, Fatigue Fract. Eng. Mater. Struct, vol.39, pp.652-674, 2016.

A. Cini and P. E. Irving, Transformation of defects into fatigue cracks; the role of Kt and defect scale on fatigue life of non-pristine components, Procedia Eng, vol.2, pp.667-677, 2010.

G. Clark and J. F. Knott, Measurement of fatigue cracks in notched specimens by means of theoretical electrical potential calibrations, J. Mech. Phys. Solids, vol.23, pp.265-276, 1975.

S. Courtin, Propagation de fissures de fatigue dans une géométrie de gorge de vilebrequin en présence de contraintes résiduelles de galetage, 2004.

M. ;. Creager, Comportement et endommagement en fatigue oligocyclique d'un acier inoxydable austénitique 304L en fonction de l'environnement (vide, air, eau primaire REP) à 300°C, Theses Diss. de Baglion, 1966.

J. C. Devaux, Y. D'escatha, P. Rabbe, and A. Pellisier-tanon, A criterion for analysing fatigue crack initiation in geometrical singularities, Struct. Mech. React. Technol. Trans, 1979.

H. Dhahri, Endommagement en fatigue multiaxiale avec effet d'environnement REP, 2019.
URL : https://hal.archives-ouvertes.fr/tel-02308221

Q. Dong, P. Yang, and G. Xu, Low cycle fatigue analysis of CTOD under variable amplitude loading for AH-32 steel, Mar. Struct, vol.63, pp.257-268, 2019.

,

L. Doremus, Etude expérimentale et modélisation de la micro-propagation à partir d'anomalies de surface dans l'Inconel 718DA, 2014.

L. Doremus, J. Cormier, P. Villechaise, G. Henaff, Y. Nadot et al., Influence of residual stresses on the fatigue crack growth from surface anomalies in a nickel-based superalloy, Mater. Sci. Eng. -Struct. Mater. Prop. Microstruct. Process, vol.644, pp.234-246, 2015.
URL : https://hal.archives-ouvertes.fr/hal-02902529

L. Doremus, Y. Nadot, G. Henaff, C. Mary, and S. Pierret, Calibration of the potential drop method for monitoring small crack growth from surface anomalies -Crack front marking technique and finite element simulations, Int. J. Fatigue, vol.70, pp.178-185, 2015.

N. E. Dowling, Geometry effects and the J-integral approach to elastic-plastic fatigue crack growth, in: Cracks and Fracture, 1976.

W. Elber, The Significance of Fatigue Crack Closure, Damage Toler. Aircr. Struct, 1971.

M. Enmark, G. Lucas, and G. Odette, An Electric-Potential Drop Technique for Characterizing Part-Through Surface Cracks, J. Nucl. Mater, vol.191, pp.1038-1041, 1992.

, EROMDAT -Engine ROtor Material DAmage Tolerance, 2012.

R. M. Fleury, E. Salvati, D. Nowell, A. M. Korsunsky, F. Silva et al., The effect of surface damage and residual stresses on the fatigue life of nickel superalloys at high temperature, Int. J. Fatigue, vol.119, pp.34-42, 2019.

R. G. Forman and S. R. Mettu, Behavior of surface and corner cracks subjected to tensile and bending loads in Ti-6Al-4V alloy, 1990.

P. G. Frankel, P. J. Withers, M. Preuss, H. Wang, J. Tong et al., Residual stress fields after FOD impact on flat and aerofoil-shaped leading edges, Mech. Mater, vol.55, pp.130-145, 2012.

L. Gandossi, S. A. Summers, N. G. Taylor, R. C. Hurst, B. J. Hulm et al., The potential drop method for monitoring crack growth in real components subjected to combined fatigue and creep conditions: application of FE techniques for deriving calibration curves, Int. J. Press. Vessels Pip, vol.78, pp.881-891, 2001.

,

M. Gerland, R. Alain, B. A. Saadi, and J. Mendez, Low cycle fatigue behaviour in vacuum of a 316L-type austenitic stainless steel between 20 and 600 C-Part II: Dislocation structure evolution and correlation with cyclic behaviour, Mater. Sci. Eng. A, vol.229, pp.68-86, 1997.

M. Gerland, J. Mendez, P. Violan, and B. Ait-saadi, Evolution of dislocation structures and cyclic behaviour of a 316L-type austenitic stainless steel cycled in vacuo at room temperature, Mater. Sci. Eng. A, vol.118, issue.89, pp.90060-90069, 1989.

S. Gourdin, J. Cormier, G. Henaff, Y. Nadot, F. Hamon et al., Assessment of specific contribution of residual stress generated near surface anomalies in the high temperature fatigue life of a Rene 65 superalloy, Fatigue Fract. Eng. Mater. Struct, vol.40, pp.69-80, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02901676

K. Hatanaka, T. Fujimitsu, and H. Watanabe, Growth of low-cycle fatigue crack in steels for machine structural use, Trans. Jpn. Soc. Mech. Eng. Ser. A, vol.52, pp.579-586, 1986.

G. Hénaff and F. Morel, Fatigue des structures : endurance, critères de dimensionnement, 2005.

T. Hoshide, K. Tanaka, and M. Nakata, Experimental Investigation on Fatigue Crack Growth Law Under Elastic, Elastic-Plastic and General Yield Conditions, J Soc Mater Sci Jpn, vol.31, pp.566-572, 1982.

N. Huin, Effets d'environnement sur la fatigue de l'acier inoxydable 304L en milieu primaire REP sous chargement cyclique, 2013.
URL : https://hal.archives-ouvertes.fr/tel-00835093

K. Ikeda, M. Yoshimi, and C. Miki, Electrical potential drop method for evaluating crack depth, Int. J. Fract, vol.47, pp.25-38, 1991.

A. Inchekel and J. E. Talia, Effect of scratches on the fatigue behavior of an Al-Li alloy, Fatigue Fract. Eng. Mater. Struct, vol.17, pp.501-507, 1994.

C. E. Jaske and W. J. O'donnell, Fatigue Design Criteria for Pressure Vessel Alloys, J. Press. Vessel Technol, vol.99, pp.584-592, 1977.

H. H. Johnson, Calibrating the Electric Potential Method for Studying Slow Crack Growth, Mater. Res. Stand, vol.5, p.442, 1965.

M. Kamaya, Influence of strain range on fatigue life reduction of stainless steel in PWR primary water, Fatigue Fract. Eng. Mater. Struct, vol.40, pp.2194-2203, 2017.

M. Kamaya, Low-cycle fatigue crack growth prediction by strain intensity factor, Int. J. Fatigue, vol.72, pp.80-89, 2015.

M. Kamaya and M. Kawakubo, Strain-based modeling of fatigue crack growth -An experimental approach for stainless steel, Int. J. Fatigue, vol.44, pp.131-140, 2012.

H. Kitagawa, S. Takahashi, C. M. Suh, and S. Miyashita, Quantitative Analysis of Fatigue Process-Microcracks and Slip Lines Under Cyclic Strains, 1979.

U. Krupp, H. Christ, P. Lezuo, H. J. Maier, and R. G. Teteruk, Influence of carbon concentration on martensitic transformation in metastable austenitic steels under cyclic loading conditions, Mater. Sci. Eng. A, vol.319, pp.527-530, 2001.

C. Laird, The Influence of Metallurgical Structure on the Mechanisms of Fatigue Crack Propagation. Fatigue Crack Propag, 1967.

C. Laird and G. C. Smith, Crack propagation in high stress fatigue, Philos. Mag. J. Theor. Exp. Appl. Phys, vol.7, pp.847-857, 1962.

A. Lambourg, G. Henaff, Y. Nadot, S. Gourdin, Q. Pujol-d'andrebo et al., Optimization of the DCPD technique for monitoring the crack propagation from notch root in localized plasticity, Int. J. Fatigue, vol.130, 2020.
URL : https://hal.archives-ouvertes.fr/hal-02301578

L. Pécheur and A. , Fatigue thermique d'un acier inoxydable austénitique : influence de l'état de surface par une approche multi-échelles, 2008.

,. Le-roux, Influence des paramètres métallurgiques et d'essai sur l'amorçage des fissures de fatigue en déformation imposée des aciers inoxydables austénitiques, 2004.

Y. Lehericy, Endommagement et cumul de dommage en fatigue dans le domaine de l'endurance limitée d'un acier inoxydable austénitique 304L, 2007.

P. Ljustell, Fatigue crack growth experiments and analyses-from small scale to large scale yielding at constant and variable amplitude loading, 2013.

P. Ljustell, The Effect of Large Scale Plastic Deformation on Fatigue Crack Length Measurement with the Potential Drop Method, J. Test. Eval, vol.39, pp.985-1002, 2011.

P. Maiya, Effects of Notches on Crack Initiation in Low-Cycle Fatigue, Mater. Sci. Eng, vol.38, pp.289-294, 1979.

P. S. Maiya, Considerations of crack initiation and crack propagation in low-cycle fatigue, Scr. Metall, vol.9, pp.1141-1146, 1975.

K. Makhlouf and J. W. Jones, Effects of temperature and frequency on fatigue crack growth in 18% Cr ferritic stainless steel, Int. J. Fatigue, vol.15, pp.163-171, 1993.

A. J. Mcevily and R. G. Boettner, On fatigue crack propagation in F.C.C. metals. Acta Metall., Mechanisms of fatigue in crystalline solids 11, pp.725-743, 1963.

J. Mendez, On the effects of temperature and environment on fatigue damage processes in Ti alloys and in stainless steel, Mater. Sci. Eng. A, vol.263, pp.187-192, 1999.

M. A. Meyers, O. Vöhringer, and V. A. Lubarda, The onset of twinning in metals: a constitutive description, Acta Mater, vol.49, pp.4025-4039, 2001.

Y. Murakami, Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions, 2019.

Y. Murakami, Effects of Small Defects and Nonmetallic Inclusions on the Fatigue Strength of Metals, JSME Int. J. Ser 1 Solid Mech. Strength Mater, vol.32, pp.167-180, 1989.

Y. Murakami, Stress intensity factors handbook, vol.2, 1987.

N. York,

I. Nedbal, J. Siegl, and J. Kunz, Relation Between Striation Spacing and Fatigue Crack Growth Rate in Al-Alloy Sheets, 1989.

H. Neuber, Theory of Stress Concentration for Shear-Strained Prismatical Bodies With Arbitrary Nonlinear Stress-Strain Law, J. Appl. Mech, vol.28, pp.544-550, 1961.

P. Neumann, Coarse slip model of fatigue, Acta Metall, vol.17, pp.1219-1225, 1969.

D. Nowell, D. Dini, and P. Duó, Stress analysis of V-notches with and without cracks, with application to foreign object damage, J. Strain Anal. Eng. Des, vol.38, pp.429-441, 2003.

K. Obrtlík, T. Kruml, and J. Polák, Dislocation structures in 316L stainless steel cycled with plastic strain amplitudes over a wide interval, Mater. Sci. Eng. A, vol.187, pp.1-9, 1994.

M. S. Ogneva, M. B. Rigmant, N. V. Kazantseva, D. I. Davydov, and M. K. Korkh, Effect of deformation martensite on the electrical and magnetic properties of plastically deformed chromium-nickel steel, Russ. J. Nondestruct. Test, vol.53, pp.644-651, 2017.

,

A. Ould-amer, Endommagement à différentes échelles d'un acier austénitique inoxydable en fatigue à amplitude constante et variable, ENSTA ParisTech, 2014.

P. Paris and F. Erdogan, A Critical Analysis of Crack Propagation Laws, J. Basic Eng, vol.85, pp.528-533, 1963.

S. Petitjean, Influence de l'état de surface sur le comportement en fatigue à grand nombre de cycles de l'acier inoxydable austénitique 304L, 2003.

W. D. Pilkey, D. F. Pilkey, and R. E. Peterson, Peterson's stress concentration factors, 2008.

T. Poulain, Fatigue oligocyclique d'un acier inoxydable austénitique 304L : influence de l'état de surface et de signaux de, 2015.

B. Rho, H. Hong, and S. W. Nam, Effect of Delta-ferrite on fatigue cracks in 304L steels, Int. J. Fatigue -Int J Fatigue, vol.22, issue.00, pp.43-51, 2000.

J. R. Rice, A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks, J. Appl. Mech, vol.35, pp.379-386, 1968.

R. O. Ritchie and K. J. Bathe, On the calibration of the electrical potential technique for monitoring crack growth using finite element methods, Int. J. Fract, vol.15, pp.47-55, 1979.

G. R. Romanoski, The fatigue behavior of small cracks in aircraft turbine disk alloys, 1990.

L. Saint-sulpice, M. Lakrit, S. Arbab-chirani, and S. Calloch, Variation in electric resistivity in metastable alloys during thermomechanical loading: Effects of temperature, elasticity, plasticity and phase transformation, Mech. Mater, vol.71, pp.1-9, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00949685

J. Sezgin, Modélisation de la formation des décohésions dues à l'hydrogène dans l'acier 18MND5, 2017.

Y. Shih and J. Chen, The stress intensity factor study of an elliptical cracked shaft, Nucl. Eng. Des, vol.214, pp.137-145, 2002.

Y. Shih and J. Chen, The frequency effect on the fatigue crack growth rate of 304 stainless steel, Nucl. Eng. Des, vol.191, pp.225-230, 1999.

M. Shiratori, T. Miyoshi, Y. Sakai, G. Zhang, and . Rong, Analysis of Stress Intensity Factors for Surface Cracks Subjected to Arbitrarily Distributed Surface Stresses : 3rd Report, Analysis and Application of Influence Coefficients for Round Bars with a Semielliptical Surface Crack, Trans. Jpn. Soc. Mech. Eng. Ser. A, vol.53, pp.779-785, 1987.

R. A. Smith, A. D. Cameron, S. R. Valluri, D. M. Taplin, P. R. Rao et al., A three dimensional wax analogue for the calibration of the electrical potential technique of crack growth monitoring, Fracture 84. Pergamon, pp.3371-3376, 1984.

S. Suresh and R. O. Ritchie, Propagation of short fatigue cracks, Int. Met. Rev, vol.29, pp.445-475, 1984.

H. Tada, P. C. Paris, and G. R. Irwin, The Stress Analysis of Cracks Handbook, Third Edition, 2000.

K. Tanaka, T. Hoshide, and N. Sakai, Mechanics of fatigue crack propagation by crack-tip plastic blunting, Eng. Fract. Mech, vol.19, pp.805-825, 1984.

K. M. Tarnowski, C. M. Davies, D. W. Dean, and K. M. Nikbin, Evaluation of Existing and New Sensor Technologies for Fatigue, Fracture and Mechanical Testing, p.100, 2015.

. Barr-harbor-drive, C. Box, and W. Conshohocken, , pp.73-96, 2959.

K. M. Tarnowski, D. W. Dean, K. M. Nikbin, and C. M. Davies, Predicting the influence of strain on crack length measurements performed using the potential drop method, Eng. Fract. Mech, vol.182, pp.635-657, 2017.

K. Vor, Etude expérimentale et modélisation numérique de la fermeture de fissures longues et courtes dans un acier inoxydable 304L, 2009.

K. Vor, C. Gardin, C. Sarrazin-baudoux, and J. Petit, Wake length and loading history effects on crack closure of through-thickness long and short cracks in 304L: Part I -Experiments, Eng. Fract. Mech, vol.99, pp.266-277, 2013.

,

M. Vormwald, Fatigue Crack Propagation under Large Cyclic Plastic Strain Conditions, Procedia Mater. Sci, vol.3, pp.301-306, 2014.

W. Zhang, H. Liu, Q. Wang, and J. He, A Fatigue Life Prediction Method Based on Strain Intensity Factor, Materials, vol.10, p.689, 2017.