, « Demand for aluminium is growing worldwide

C. Vargel, Métallurgie de l'aluminium, pp.1-20, 2010.

M. , « Corrosion des alliages d'aluminium », Techniques de l'Ingénieur, pp.1-19, 2005.

, « Understanding Alloys: Advancing Aluminum

E. A. Starke and J. T. Staleyt, « Application of modern aluminum alloys to aircraft, Prog. Aerosp. Sci, vol.32, pp.131-172, 1996.

R. N. Lumley, ;. , R. N. Lumley, and É. , « Introduction to aluminium metallurgy, Fundamentals of aluminium metallurgy: production, processing and applications, pp.1-19, 2010.

M. Stucky, Traitements thermiques des alliages d'aluminium -Matériels et recommandations », Tech. l'Ingénieur, pp.1-25, 2011.

, « Aluminum Alloys, vol.101

D. Sur,

G. Hénaff, G. Odemer, and B. Journet, « Creep and creep-fatigue crack growth in aluminium alloys, Aluminium alloyws, theory and applications, pp.1-400, 2011.

C. Vargel, Corrosion of Aluminium, 2004.

R. G. Buchheit, R. K. Boger, M. C. Carroll, R. M. Leard, C. Paglia et al., « The Electrochemistry of Intermetallic Particles and Localized Corrosion in Al Alloys, J. Mater, vol.53, issue.7, pp.29-33, 2001.

H. G. Wilsdorf, Structure of amorphous aluminium oxide films, vol.168, pp.600-601, 1951.

P. Dumas, J. P. Dubarry-barbe, D. Rivière, Y. Levy, and J. Corset, « Growth of thin alumina film on aluminium at room temperature : a kinetic and spectroscopic study by surface plasmon excitation, J. Phys. Colloq, vol.44, 1983.

M. S. Hunter and P. Fowle, « Natural and Thermally Formed Oxide Films on Aluminum, J. Electrochem. Soc, vol.103, issue.9, pp.482-485, 1956.

D. De-la-fuente, E. Otero-huerta, and E. M. Morcillo, « Studies of long-term weathering of aluminium in the atmosphere », Corros. Sci, vol.49, issue.7, pp.3134-3148, 2007.

H. M. Dunlop and M. Benmalek, Role and Characterization of Surfaces in the Aluminium Industry, J. Phys. IV, vol.07, pp.6-163, 1997.
URL : https://hal.archives-ouvertes.fr/jpa-00255713

E. Mccafferty, Introduction to Corrosion Science, 1 re éd, 2010.

R. Pippig, E. Schmidl, P. Steinert, A. Schubert, and T. Lampke, Experimental and numerical investigation of the residual yield strength of aluminium alloy EN AW-2024-T3 affected by artificially produced pitting corrosion, IOP Conf. Series: Materials Science and Engineering, vol.181, pp.1-6, 2017.

R. E. Melchers, « Time Dependent Development of Aluminium Pitting Corrosion, Adv. Mater. Sci. Eng, vol.2015, issue.1, pp.1-10, 2015.

M. C. Reboul, T. Warner, H. Mayet, and B. Baroux, « A Ten-Step Mechanism for the Pitting Corrosion of Aluminium, Mater. Sci. Forum, pp.1553-1558, 1996.

S. Michael, D. Wieser, and R. Bender, Corrosion Resistance of Aluminium and Aluminium Alloys, 2010.

M. Shao, Y. Fu, R. Hu, and C. Lin, « A study on pitting corrosion of aluminum alloy 2024-T3 by scanning microreference electrode technique, Mater. Sci. Eng. A, vol.344, pp.323-327, 2003.

S. T. Pride, J. R. Scully, and J. L. Hudson, « Metastable Pitting of Aluminum and Criteria for the Transition to Stable Pit Growth, J. Electrochem. Soc, vol.141, issue.11, pp.3028-3040, 1994.

A. Bautista, « Filiform corrosion in polymer-coated metals, Prog. Org. Coatings, vol.28, issue.1, pp.49-58, 1996.

G. D. Steele, « Filiform Corrosion on Architectural Aluminium », Anti-Corrosion Methods Mater, vol.41, issue.1, pp.8-12, 1994.

J. M. Mol, B. R. Hinton, D. H. Van-der-weijde, and J. H. De-wit, Van Der Zwaag, « Filiform corrosion and potentiodynamic polarisation study of some aluminium alloys, J. Mater. Sci, vol.35, issue.7, pp.1629-1639, 2000.

X. Zhou, G. E. Thompson, and G. M. Scamans, « The influence of surface treatment on filiform corrosion resistance of painted aluminium alloy sheet, Corros. Sci, vol.45, issue.8, pp.1767-1777, 2003.

R. Viroulaud, Protection contre la corrosion des alliages d'aluminium par la conversion TCP : influence de la chimie de surface, 2016.
URL : https://hal.archives-ouvertes.fr/tel-01647213

F. W. Eppensteiner, M. R. Jenkins, and . Chromate, Met. Finish, vol.105, issue.10, pp.413-424, 2010.

A. E. Hughes, R. J. Taylor, and B. R. Hinton, , p.2024

». Al-alloy, Surf. Interface Anal, vol.25, issue.4, pp.223-234, 1997.

T. L. Metroke, R. L. Parkhill, and E. T. Knobbe, « Passivation of metal alloys using solgel-derived materials -A review, Prog. Org. Coatings, vol.41, pp.233-238, 2001.

T. P. Hoar and G. C. Wood, On the Assessment of Sealing of Anodic Oxide Films on Aluminium, vol.7, pp.333-353, 1962.

Y. Zuo, P. H. Zhao, and J. M. Mao, « The influences of sealing methods on corrosion behavior of anodized aluminum alloys in NaCl solutions, Surf. Coatings Technol, vol.166, issue.2-3, pp.237-242, 2003.

A. F. Leo, DeSoto), « Corrosion resistant epoxy-amine chromate containing primers, p.4075153, 1978.

J. S. , Sekhon (DeSoto), « Protective coating material, p.3979351, 1976.

J. Sinko, Hi-Shear Corporation), « Challenges of chromate inhibitor pigments replacement in organic coatings, Prog. Org. Coatings, vol.42, pp.267-282, 2001.

A. D. Dayan, ;. , and A. J. Paine, « Mechanisms of chromium toxicity, carcinogenicity and allergenicity: Review of the literature from, Hum. Exp. Toxicol, vol.20, issue.9, pp.439-451, 1985.

R. Saha, R. Nandi, and B. Saha, « Sources and toxicity of hexavalent chromium, J. Coord. Chem, vol.64, issue.10, pp.1782-1806, 2011.

R. Noiville, O. Jaubert, M. Gressier, J. Bonino, P. Taberna et al., III) corrosion inhibitor release from silica and boehmite nanocontainers, Mater. Sci. Eng. B, vol.229, pp.144-154, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02020913

I. A. Kartsonakis, E. P. Koumoulos, and C. A. Charitidis, Advancement in corrosion resistance of AA 2024-T3 through sol-gel coatings including nanocontainers, vol.4, pp.1-18, 2017.

A. N. Khramov, N. N. Voevodin, V. N. Balbyshev, and M. S. Donley, « Hybrid organoceramic corrosion protection coatings with encapsulated organic corrosion inhibitors, Thin Solid Films, pp.549-557, 2004.

M. L. Zheludkevich, J. Tedim, M. G. Ferreira, and «. , Smart" coatings for active corrosion protection based on multi-functional micro and nanocontainers », Electrochim. Acta, vol.82, pp.314-323, 2012.

J. M. Vega, N. Granizo, J. Simancas, I. Díaz, M. Morcillo et al., Exploring the corrosion inhibition of aluminium by coatings formulated with calcium exchange bentonite, Prog. Org. Coatings, vol.111, pp.273-282, 2017.

M. Fedel, E. Callone, S. Diré, F. Deflorian, M. G. Olivier et al., « Effect of Na-Montmorillonite sonication on the protective properties of hybrid silica coatings », Electrochim. Acta, vol.124, pp.90-99, 2014.

S. Bohm, H. N. Mcmurray, D. A. Worsley, and S. M. Powell, « Novel environment friendly corrosion inhibitor pigments based on naturally occurring clay minerals, Mater. Corros, vol.52, pp.896-903, 2002.

S. Chandrasekhar and P. N. Pramada, « Sintering behaviour of calcium exchanged low silica zeolites synthesized from kaolin, Ceram. Int, vol.27, pp.105-114, 2001.

C. Deyá, R. Romagnoli, and B. Del-amo, « A new pigment for smart anticorrosive coatings, J. Coatings Technol. Res, vol.4, issue.2, pp.167-175, 2007.

M. Kendig, M. Hon, L. Warren, and «. Smart, corrosion inhibiting coatings », Prog. Org. Coatings, vol.47, pp.183-189, 2003.

P. Visser and S. Alan, Akzo Nobel Coatings International), « Anti-corrosive coating composition, 2010.

P. Visser, Y. Liu, H. Terryn, and J. M. Mol, « Lithium salts as leachable corrosion inhibitors and potential replacement for hexavalent chromium in organic coatings for the protection of aluminum alloys, J. Coatings Technol. Res, vol.13, issue.4, pp.557-566, 2016.

P. Visser, Y. Liu, X. Zhou, T. Hashimoto, A. J. Mol et al., « The corrosion protection of AA2024-T3 aluminium alloy by leaching of lithium-containing salts from organic coatings, Faraday Discuss, vol.180, pp.511-526, 2015.

P. Visser, Y. Gonzalez-garcia, J. M. Mol, and H. Terryn, « Mechanism of Passive Layer Formation on AA2024-T3 from Alkaline Lithium Carbonate Solutions in the Presence of Sodium Chloride, J. Electrochem. Soc, vol.165, issue.2, pp.60-70, 2018.

K. Marcoen, P. Visser, G. F. Trindade, M. L. Abel, J. F. Watts et al., Compositional study of a corrosion protective layer formed by leachable lithium salts in a coating defect on AA2024-T3 aluminium alloys, vol.119, pp.65-75, 2018.

P. Visser, A. Lutz, J. M. Mol, and H. Terryn, « Study of the formation of a protective layer in a defect from lithium-leaching organic coatings, Prog. Org. Coatings, vol.99, pp.80-90, 2016.

P. Visser, K. Marcoen, G. F. Trindade, M. L. Abel, J. F. Watts et al., The chemical throwing power of lithium-based inhibitors from organic coatings on AA2024-T3 », vol.150, pp.194-206, 2018.

P. Visser, H. Terryn, and J. M. Mol, « On the importance of irreversibility of corrosion inhibitors for active coating protection of AA2024-T3 », Corros. Sci, vol.140, pp.272-285, 2018.

P. Visser, M. Meeusen, Y. Gonzalez-garcia, H. Terryn, and J. M. Mol, « Electrochemical Evaluation of Corrosion Inhibiting Layers Formed in a Defect from Lithium-Leaching Organic Coatings, J. Electrochem. Soc, vol.164, issue.7, pp.396-406, 2017.

Y. Liu, P. Visser, X. Zhou, S. B. Lyon, T. Hashimoto et al., « Protective Film Formation on AA2024-T3 Aluminum Alloy by Leaching of Lithium Carbonate from an Organic Coating, J. Electrochem. Soc, vol.163, issue.3, pp.45-53, 2016.

J. M. Vega, N. Granizo, D. De-la-fuente, J. Simancas, and M. Morcillo, « Corrosion inhibition of aluminum by coatings formulated with Al-Zn-vanadate hydrotalcite, Prog. Org. Coatings, vol.70, issue.4, pp.213-219, 2011.

B. Chico, J. Simancas, J. M. Vega, N. Granizo, I. Díaz et al., Anticorrosive behaviour of alkyd paints formulated with ion-exchange pigments, Prog. Org. Coatings, vol.61, issue.2-4, pp.283-290, 2008.

R. A. Cayless and D. A. Pippard, The British Petroleum Company), « Corrosion inhibitors, methods of producing them and protective coatings containing them. », EP0046057B1, 1984.

T. E. Fletcher, The British Petroleum Company), « Corrosion-inhibiting composition, 1992.

T. Fletcher, « Ion-Exchanged pigments for anticorrosive coatings, J. coatings Technol, pp.28-39, 2013.

L. W. Vasconcelos, I. C. Margarit, O. R. Mattos, F. L. Fragata, and A. S. Sombra, « Inhibitory properties of calcium exchanged silica epoxy paintings », Corros. Sci, vol.43, pp.2291-2303, 2001.

P. C. Dodds, G. Williams, and J. Radcliffe, « Chromate-free smart release corrosion inhibitive pigments containing cations, Prog. Org. Coatings, vol.102, 2016.

N. Granizo, J. M. Vega, D. De-la-fuente, B. Chico, and M. Morcillo, « Ion-exchange pigments in primer paints for anticorrosive protection of steel in atmospheric service: Anion-exchange pigments, Prog. Org. Coatings, vol.76, issue.2-3, pp.411-424, 2013.

J. M. Vega, N. Granizo, J. Simancas, D. De-la-fuente, I. Díaz et al., « Corrosion inhibition of aluminum by organic coatings formulated with calcium exchange silica pigment, J. Coatings Technol. Res, vol.10, issue.2, pp.209-217, 2013.

M. Zubielewicz and W. Gnot, Mechanisms of non-toxic anticorrosive pigments in organic waterborne coatings », vol.49, pp.358-371, 2004.

D. Wang and G. P. Bierwagen, « Sol-gel coatings on metals for corrosion protection, Prog. Org. Coatings, vol.64, issue.4, pp.327-338, 2009.

F. Andreatta, L. Fedrizzi, ;. , L. Klein, M. Aparicio et al., « The Use of Electrochemical Techniques for the Characterization of the Corrosion Behavior of Sol-Gel-Coated Metals, Handbook of Sol-Gel Science and Technology, pp.1-49, 2016.

M. Guglielmi, « Sol-Gel Coatings on Metals, vol.8, pp.443-449, 1997.

C. J. Brinker and G. W. Scherer, Sol-gel science : the physics and chemistry of sol-gel processing, 1990.

J. Ebelmen, Comptes rendus hebdomadaires des séances de l'Académie des sciences, p.1847

H. Dislich and P. Hinz, « History and principles of the sol-gel process, and some new multicomponent oxide coatings, J. Non. Cryst. Solids, vol.48, pp.11-16, 1982.

P. Audebert and F. Miomandre, « Procédé sol-gel de polymérisation », Techniques de l'Ingénieur, pp.1-10, 2005.

J. Livage and C. Sanchez, « Sol-gel chemistry, J. Non. Cryst. Solids, vol.145, pp.11-19, 1992.

E. Martin, D. Adolf, and P. Wilcoxon, « Viscoelasticity near the sol-gel transition, Phys. Rev. A, vol.39, issue.3, pp.1325-1332, 1989.

J. E. Martin and D. Adolf, « The Sol-Gel Transition In Chemical Gels, Annu. Rev. Phys. Chem, vol.42, pp.311-339, 1991.

G. Jonschker, Sol-Gel-Technology in Praxis, 2014.

F. Collignon, « Cahier technologique sol-gel, 2008.

M. L. Zheludkevich, I. M. Salvado, and M. G. Ferreira, « Sol-gel coatings for corrosion protection of metals, J. Mater. Chem, vol.15, p.5099, 2005.

H. Schmidt, S. Langenfeld, and R. Naß, « A new corrosion protection coating system for pressure-cast aluminium automotive parts, Mater. Des, vol.18, pp.309-313, 1997.

X. F. Yang, D. E. Tallman, V. J. Gelling, G. P. Bierwagen, L. S. Kasten et al., Use of a sol-gel conversion coating for aluminum corrosion protection, Surf. Coatings Technol, vol.140, pp.44-50, 2001.

A. S. Hamdy and D. P. Butt, « Environmentally compliant silica conversion coatings prepared by sol-gel method for aluminum alloys, Surf. Coatings Technol, vol.201, pp.401-407, 2006.

F. Perrin, « Films inorganiques et hybrides protecteurs obtenus par voie sol-gel », Techniques de l'Ingénieur, p.6, 2007.

G. Schottner, Hybrid Sol -Gel-Derived Polymers : Applications of Multifunctional Materials, vol.13, pp.3422-3435, 2001.

M. Faustini, L. Nicole, E. Ruiz-hitzky, and E. C. Sanchez, « History of Organic-Inorganic Hybrid Materials: Prehistory, Art, Science, and Advanced Applications, vol.28, pp.1-30, 2018.

K. Y. Blohowiak, J. H. Osborne, and K. A. Krienke, The Boeing Company), « Sol for coating metals, 1992.

K. Y. Blohowiak, J. H. Osborne, and K. A. Krienke, The Boeing Company), vol.005849110, 1998.

K. Y. Blohowiak, J. H. Osborne, and K. A. Krienke, The Boeing Company), « Sol-gel coated metal, p.5939197, 1999.

J. Liu, M. K. Chaudhury, D. H. Berry, J. E. Seebergh, J. H. Osborne et al., Effect of surface morphology on crack growth at a sol-gel reinforced epoxy/aluminum interface, J. Adhes, vol.82, pp.487-516, 2006.

L. L. Blanc, E. Campazzi, and P. Savigne, Airbus France), « Sol for sol-gel process coating of a surface and coatng method by sol-gel process using same, 2007.

C. Croutxé-barghorn, M. Brito, X. Allonas, C. Belon, A. Chemtob et al., « Organic and Hybrid interpenetrated Polymer Networks for Advanced Materials, J. Photoplymer Sci. Technol, vol.25, issue.2, pp.131-135, 2012.

G. Melia, J. Moghal, C. Hicks, M. Oubaha, D. Mccormack et al., « Investigation of the mechanical and thermal fatigue properties of hybrid sol-gel coatings applied to AA2024 substrates, J. Coatings Technol. Res, vol.13, issue.6, pp.1083-1094, 2016.

B. A. Latella, C. J. Barbé, D. J. Cassidy, H. Li, and M. Ignat, « Mechanical stability and decohesion of sol-gel hybrid coatings on metallic substrates, Rev. Matéria, vol.10, issue.2, pp.199-204, 2005.

H. Wang and R. Akid, « A room temperature cured sol -gel anticorrosion pre-treatment for Al 2024-T3 alloys, Corrosion, vol.49, pp.4491-4503, 2007.

N. P. Tavandashti, S. Sanjabi, and T. Shahrabi, « Corrosion protection evaluation of silica / epoxy hybrid nanocomposite coatings to AA2024, Prog. Org. Coatings, vol.65, pp.182-186, 2009.

R. B. Figueira, C. J. Silva, and E. Pereira, « Organic-inorganic hybrid sol-gel coatings for metal corrosion protection: a review of recent progress, J. Coatings Technol. Res, vol.12, issue.1, pp.1-35, 2015.

S. Bera, T. K. Rout, G. Udayabhanu, and R. Narayan, « Comparative Study of Corrosion Protection of Sol-Gel Coatings with Different Organic Functionality on Al-2024 substrate, Prog. Org. Coatings, vol.88, pp.293-303, 2015.

V. Dalmoro, J. H. Santos, C. Alemán, and D. S. Azambuja, « An assessment of the corrosion protection of AA2024-T3 treated with vinyltrimethoxysilane/(3-glycidyloxypropyl)trimethoxysilane », Corros. Sci, vol.92, pp.200-208, 2015.

J. I. Iribarren-mateos, I. Buj-corral, J. Vivancos-calvet, C. Alemán, J. I. Iribarren et al., Silane and epoxy coatings: A bilayer system to protect AA2024 alloy, vol.81, pp.47-57, 2015.

L. Ni, A. Chemtob, C. Croutxé-barghorn, N. Moreau, T. Bouder et al., « Direct-to-metal UV-cured hybrid coating for the corrosion protection of aircraft aluminium alloy, Corros. Sci, vol.89, pp.242-249, 2014.

S. Zheng and J. Li, « Inorganic -organic sol gel hybrid coatings for corrosion protection of metals, J. Sol-Gel Sci. Technol, vol.54, pp.174-187, 2010.

E. Amerio, M. Sangermano, G. Malucelli, A. Priola, and B. Voit, « Preparation and characterization of hybrid nanocomposite coatings by photopolymerization and sol-gel process, Polymer (Guildf), vol.46, pp.11241-11246, 2005.

G. Kickelbick, Hybrid materials: synthesis, characterization, and applications, 2007.

R. Schwalm, UV Coating: Basics, Recent Developments and New Application, 2006.

G. A. Senich and R. E. Florin, « Radiation Curing of Coating, J. Macromol. Sci. Part C, vol.24, issue.2, pp.239-324, 1984.

J. V. Koleske, Radiation curing of coatings, 2002.

F. J. Fox, R. W. Noren, and G. E. Krankkla, Catalyst for condensation of hydrolyzable silanes and storage stable compositions thereof, 1978.

A. R. Katritzky and G. J. Sabongi, Radiation curing -science and technology, 1992.

, Compréhension des mécanismes d'inhibition de la corrosion dans le cadre de revêtements hybrides pour pièces aéronautiques Anai?s Even, 2019.

J. D. Mackenzie and E. P. Bescher, « Physical Properties of Sol-Gel Coatings », J. Sol-Gel Sci. Technol, vol.19, pp.23-29, 2000.

F. N. Jones, M. E. Nichols, and S. P. Pappas, Organic Coatings: Science and Technology, 2017.

A. Forsgren, Corrosion Control Through Organic Coatings, 2006.

W. Funke, « Towards environmentally acceptable corrosion protection by organic coating, Anti-Corrosion Methods Mater, vol.31, issue.3, pp.4-7, 1984.

W. Funke, « Problems and progress in organic coatings science and technology, Prog. Org. Coatings, vol.31, issue.2, pp.5-9, 1997.

S. B. Lyon, R. Bingham, and D. J. Mills, « Coatings Advances in corrosion protection by organic coatings : What we know and what we would like to know, Prog. Org. Coatings, vol.102, pp.2-7, 2017.

M. L. Zheludkevich, I. M. Salvado, and M. G. Ferreira, « Sol-gel coatings for corrosion protection of metals, J. Mater. Chem, vol.15, p.5099, 2005.

S. J. Garcia, T. A. Markley, J. M. Mol, and A. E. Hughes, Unravelling the corrosion inhibition mechanisms of bi-functional inhibitors by, Corros. Sci, vol.69, pp.346-358, 2013.

, « ISO 4624 -Peintures et vernis --Essai de traction, 2016.

, « ISO 2409 -Peintures et vernis --Essai de quadrillage, 2013.

, « ISO 14679 -Adhésifs --Détermination des caractéristiques d'adhésion par une méthode de flexion à trois points, 1997.

K. Rao and K. P. Rao, Pitting Corrosion of Heat-Treatable Aluminium Alloys and Welds: A Review, vol.57, pp.593-610, 2004.

C. M. Liao, J. M. Olive, M. Gao, R. P. Wei, and . In, Situ Monitoring of Pitting Corrosion in Aluminum Alloy, Corrosion, vol.54, issue.6, pp.451-458, 1998.

A. Boag, A. E. Hughes, N. C. Wilson, A. Torpy, C. M. Macrae et al., « How complex is the microstructure of AA2024-T3? », Corros. Sci, vol.51, issue.8, pp.1565-1568, 2009.

R. G. Buchheit, « Local Dissolution Phenomena Associated with S Phase

, CuMg) Particles in Aluminum Alloy 2024-T3 », J. Electrochem. Soc, vol.144, issue.8, p.2621, 1997.

O. Soppera and C. Croutxé-barghorn, « Real-time Fourier transform infrared study of free-radical UV-induced polymerization of hybrid sol-gel. I. Effect of silica backbone on photopolymerization kinetics, J. Polym. Sci. Part A Polym. Chem, vol.41, pp.716-724, 2003.

J. Pierrel, A. Ibrahim, C. Croutxé-barghorn, and E. X. Allonas, « Effect of the oxygen affected layer in multilayered photopolymers, Polym. Chem, vol.8, pp.4596-4602, 2017.

L. Baia, K. Gigant, U. Posset, G. Schottner, W. Kiefer et al., « Confocal micro-Raman spectroscopy: Theory and application to a hybrid polymer coating, Appl. Spectrosc, vol.56, issue.4, pp.536-540, 2002.

F. Belaroui, Y. Grohens, H. Boyer, and Y. Holl, « Depth profiling of small molecules in dry latex films by confocal Raman spectroscopy, Polymer (Guildf), vol.41, pp.7641-7645, 2000.

E. R. Andrew, A. Bradbury, and R. G. Eades, « Removal of dipolar broadening of nuclear magnetic resonance spectra of solids by specimen rotation, Nature, vol.183, pp.1802-1803, 1959.

F. Babonneau, N. Baccile, G. Laurent, J. Maquet, T. Azaïs et al., « Solid-state nuclear magnetic resonance: A valuable tool to explore organic-inorganic interfaces in silica-based hybrid materials, Comptes Rendus Chim, vol.13, pp.58-68, 2010.

C. Belon, A. Chemtob, C. Croutxé-barghorn, S. Rigolet, V. L. Houérou et al., « Combination of radical and cationic photoprocesses for the single-step synthesis of organic-inorganic hybrid films, J. Polym. Sci. Part A Polym. Chem, vol.48, pp.4150-4158, 2010.

L. Ni, A. Chemtob, C. Croutxé-barghorn, J. Brendlé, L. Vidal et al., « Photoinduced synthesis and ordering of lamellar n-alkylsiloxane films, J. Mater. Chem, vol.22, issue.2, pp.643-652, 2012.

M. D. Brito, X. Allonas, C. Croutxé-barghorn, M. Palmieri, C. Dietlin et al., « Kinetic study of photoinduced quasi-simultaneous interpenetrating polymer networks, Prog. Org. Coatings, vol.73, issue.2-3, pp.186-193, 2012.

S. J. Garcia, T. A. Markley, J. M. Mol, and A. E. Hughes, Unravelling the corrosion inhibition mechanisms of bi-functional inhibitors by, Corros. Sci, vol.69, pp.346-358, 2013.

T. P. Chou, C. Chandrasekaran, S. J. Limmer, S. Seraji, Y. Wu et al., « Organic-inorganic hybrid coatings for corrosion protection, J. Non. Cryst. Solids, vol.290, pp.153-162, 2001.

E. Boller, P. Tafforeau, W. Ludwig, L. Helfen, L. Salvo et al., « Techniques d'imagerie pour la caractérisation 3D des matériaux à l'ESRF », 2010.

D. J. Mills and S. S. Jamali, « The best tests for anti-corrosive paints. And why: A personal viewpoint, Prog. Org. Coatings, vol.102, pp.8-17, 2017.

J. Li, C. S. Jeffcoate, G. P. Bierwagen, D. J. Mills, and D. E. Tallman, Thermal Transition Effects and Electrochemical Properties in Organic Coatings: Part 1 -Initial Studies on Corrosion Protective Organic Coatings, vol.54, pp.763-771, 1998.

L. Marasinghe, C. Croutxé-barghorn, X. Allonas, and A. Criqui, « Effect of reactive monomers on polymer structure and abrasion resistance of UV cured thin films, Prog. Org. Coatings, vol.118, pp.22-29, 2017.

W. C. Oliver and G. M. Pharr, « An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res, vol.7, issue.6, pp.1564-1583, 1992.

E. Jimenez-pique, M. Anglada, S. A. Pellice, and A. L. Cavalieri, « Mechanical characterization of nano-reinforced silica based sol -gel hybrid coatings on AISI 316L stainless steel using nanoindentation techniques, Surf. Coat. Technol, vol.203, pp.3325-3331, 2009.

J. Malzbender, G. De-with, and J. M. Toonder, « Elastic modulus , indentation pressure and fracture toughness of hybrid coatings on glass, Thin Solid Films, vol.366, pp.139-149, 2000.

G. Binnig, C. F. Quate, and C. Gerber, Atomic Force Microscope, Phys. Rev. Lett, vol.56, issue.9, 1986.

N. L. Thomas, « The barrier properties of paint coatings, Prog. Org. Coatings, vol.19, issue.2, pp.101-121, 1991.

E. Mccafferty, Introduction to Corrosion Science, 1 re éd, 2010.

G. Bouvet, D. Trinh, S. Mallarino, X. Feaugas, and E. S. Touzain, « In situ monitoring of organic coating swelling by dynamic mechanical analysis and scanning electrochemical microscopy, Prog. Org. Coatings, vol.96, pp.13-18, 2016.

D. M. Brasher and A. H. Kingsbury, « Electrical measurements in the study of immersed paint coatings on metal. I. Comparison between capacitance and gravimetric methods of estimating water-uptake, J. Appl. Chem, vol.4, pp.62-72, 1954.

S. Shreepathi, S. M. Naik, and M. R. Vattipalli, « Water transportation through organic coatings: Correlation between electrochemical impedance measurements, gravimetry, and water vapor permeability, J. Coatings Technol. Res, vol.9, issue.4, pp.411-422, 2012.

C. Vosgien-lacombre, G. Bouvet, D. Trinh, S. Mallarino, and E. S. Touzain, « Water uptake in free films and coatings using the Brasher and Kingsbury equation: a possible explanation of the different values obtained by electrochemical Impedance spectroscopy and gravimetry », Electrochim. Acta, vol.231, pp.162-170, 2017.

K. Wapner and G. Grundmeier, « Scanning Kelvin Probe Measurements of the Stability of Adhesive/Metal Interfaces in Corrosive Environments, Adv. Eng. Mater, vol.6, issue.3, pp.163-167, 2004.

A. Nazarov, N. L. Bozec, and E. D. Thierry, « Assessment of steel corrosion and deadhesion of epoxy barrier paint by scanning Kelvin probe, Prog. Org. Coatings, vol.114, pp.123-134, 2018.

N. L. Bozec, D. Persson, A. Nazarov, and D. Thierry, « Investigation of Filiform Corrosion on Coated Aluminum Alloys by FTIR Microspectroscopy and Scanning Kelvin Probe, J. Electrochem. Soc, vol.149, issue.9, pp.403-408, 2002.

J. Zhao, L. Xia, A. Sehgal, D. Lu, R. L. Mccreery et al., « Effects of chromate and chromate conversion coatings on corrosion of aluminum alloy 2024-T3 », Surf. Coatings Technol, vol.140, issue.1, pp.51-57, 2001.

A. Rani, D. Somaiah, E. M. Megha, and . Poddar, « Scratch cell test: A simple, cost effective screening tool to evaluate self-healing in anti-corrosion coatings, J. Mater. Eng. Perform, vol.23, issue.9, pp.3328-3335, 2014.

P. L. Bonora, F. Deflorian, and L. Fedrizzi, « Electrochemical impedance spectroscopy as a tool for investigating underpaint corrosion, Electrochem. Acta, vol.41, pp.1073-1082, 1996.

E. P. Van-westing, G. M. Ferrari, F. M. Geenen, and J. H. , De Wit, « In situ determination of the loss of adhesion of barrier epoxy coatings using electrochemical impedance spectroscopy, Prog. Org. Coatings, vol.23, pp.89-103, 1993.

M. L. Zheludkevich, K. A. Yasakau, S. K. Poznyak, and M. G. Ferreira, Triazole and thiazole derivatives as corrosion inhibitors for AA2024 aluminium alloy, vol.47, pp.3368-3383, 2005.

A. Amirudin and D. Thieny, Application of electrochemical impedance spectroscopy to study the degradation of polymer-coated metals, Prog. Org. Coatings, vol.26, issue.1, pp.1-28, 1995.

M. L. Zheludkevich and M. G. Ferreira, « On the application of electrochemical impedance spectroscopy to study the self-healing properties of protective coatings, Electrochem. commun, vol.9, pp.2622-2628, 2007.

F. Mansfeld, S. L. Jeanjaquet, and M. W. Kendig, « An electrochemical impedance spectroscopy study of reactions at the metal/coating interface, Corros. Sci, vol.26, issue.9, pp.735-742, 1986.

Y. Mei, L. Yuxing, L. Jianhua, L. Songmei, X. Bing et al., Effects of cerium salts on corrosion behaviors of Si-Zr hybrid sol-gel coatings », Chinese J. Aeronaut, vol.28, issue.2, pp.600-608, 2015.

P. C. Varma, B. Duffy, and J. Cassidy, « Influence of magnesium nitrate on the corrosion performance of sol-gel coated AA2024-T3 aluminium alloy, Surf. Coatings Technol, vol.204, issue.3, pp.277-284, 2009.

A. Królikowska, « Requirements for paint systems for the steel bridges in Poland, Prog. Org. Coatings, vol.39, pp.37-39, 2000.

G. Bouvet, Relations entre microstructure et propriétés physico-chimiques et mécaniques de revêtements époxy modèles, 2014.

A. S. Nguyen and N. Pébère, « A local electrochemical impedance study of the selfhealing properties of waterborne coatings on 2024 aluminium alloy », Electrochim. Acta, vol.222, pp.1806-1817, 2016.

A. Nazarov, N. L. Bozec, and E. D. Thierry, « Scanning Kelvin Probe assessment of steel corrosion protection by marine paints containing Zn-rich primer, Prog. Org. Coatings, vol.125, pp.61-72, 2018.

R. Akid and M. Garma, « Scanning vibrating reference electrode technique: A calibration study to evaluate the optimum operating parameters for maximum signal detection of point source activity, Electrochim. Acta, vol.49, pp.2871-2879, 2004.

A. C. Bastos, M. C. Quevedo, O. V. Karavai, and M. G. Ferreira, « Review-On the Application of the Scanning Vibrating Electrode Technique (SVET) to Corrosion Research, J. Electrochem. Soc, vol.164, pp.973-990, 2017.

«. En-iso, Corrosion des métaux et alliages -Corrosivité des atmosphères, vol.9223, 2012.

P. A. Sørensen, S. Kiil, K. Dam-johansen, and C. E. Weinell, « Anticorrosive coatings: A review, J. Coatings Technol. Res, vol.6, issue.2, pp.135-176, 2009.

«. Iso/tr-16335, Corrosion des métaux et alliages --Essais de corrosion en atmosphères artificielles --Lignes directrices pour sélectionner un essai de corrosion accéléré pour la qualification du produit, 2013.

«. Iso, Essais de corrosion en atmosphères artificielles, 2017.

D. Zhang, H. Qian, L. Wang, and X. Li, « Comparison of barrier properties for a superhydrophobic epoxy coating under different simulated corrosion environments », Corros. Sci, vol.103, pp.230-241, 2016.

N. Lebozec, D. Thierry, A. Peltola, L. Luxem, G. Luckeneder et al., « Corrosion performance of Zn-Mg-Al coated steel in accelerated corrosion tests used in the automotive industry and field exposures, Mater. Corros, vol.64, issue.11, pp.969-978, 2013.

K. Stellnberger, « Key to development of corrosion-resistant materials, pp.26-29, 2013.

A. Forsgren, Corrosion Control Through Organic Coatings, 2006.

F. N. Jones, M. E. Nichols, and S. P. Pappas, Organic Coatings: Science and Technology, 2017.

L. Ni, A. Chemtob, C. Croutxé-barghorn, N. Moreau, T. Bouder et al.,

«. Pébère, Direct-to-metal UV-cured hybrid coating for the corrosion protection of aircraft aluminium alloy, Corros. Sci, vol.89, pp.242-249, 2014.

T. L. Metroke, J. S. Gandhi, and E. A. Apblett, « Corrosion resistance properties of Ormosil coatings on 2024-T3 aluminum alloy, Prog. Org. Coatings, vol.50, pp.231-246, 2004.

B. Ramezanzadeh, E. Ghasemi, M. Mahdavian, E. Changizi, and M. , Mohamadzadeh Moghadam, « Covalently-grafted graphene oxide nanosheets to improve barrier and corrosion protection properties of polyurethane coatings, Carbon N. Y, vol.93, pp.555-573, 2015.

C. F. Dong, H. Sheng, Y. H. An, X. G. Li, K. Xiao et al., « Corrosion of 7A04 aluminum alloy under defected epoxy coating studied by localized electrochemical impedance spectroscopy, Prog. Org. Coatings, vol.67, issue.3, pp.269-273, 2010.

A. J. Atanacio, B. A. Latella, C. J. Barbe, and M. Swain, « Mechanical properties and adhesion characteristics of hybrid sol -gel thin films, Surf. coatings Technol, vol.192, pp.354-364, 2005.

A. Roggero, N. Caussé, E. Dantras, L. Villareal, A. Santos et al., « Thermal activation of impedance measurements on an epoxy coating for the corrosion protection: 2. electrochemical impedance spectroscopy study », Electrochim. Acta, vol.305, pp.116-124, 2019.

H. H. Huang, B. Orler, G. L. Wilkes, and . Ceramers, Hybrid materials incorporating polymeric/oligomeric species with inorganic glasses by a sol-gel process, Polym. Bull, vol.14, issue.6, pp.557-564, 1985.

C. Belon, A. Chemtob, C. Croutxé-barghorn, S. Rigolet, M. Schmitt et al., « Nanocomposite coatings via simultaneous organic-inorganic photo-induced polymerization: Synthesis, structural investigation and mechanical characterization, Polym. Int, vol.59, issue.8, pp.1175-1186, 2010.

G. Kickelbick, « Concepts for the incorporation of inorganic building blocks into organic polymers on a nanoscale, Prog. Polym. Sci, vol.28, pp.83-114, 2003.

G. Kickelbick, Hybrid materials: synthesis, characterization, and applications, 2007.

O. Soppera and C. Carr, « Real time study of hybrid sol-gel photopolymerization by UV light, J. Sol-Gel Sci. Technol, vol.41, pp.93-97, 2007.

O. Soppera and C. Croutxé-barghorn, « Real-time Fourier transform infrared study of the free-radical ultraviolet-induced polymerization of a hybrid sol-gel. II. The effect of physicochemical parameters on the photopolymerization kinetics, J. Polym. Sci. Part A Polym. Chem, vol.41, issue.6, pp.831-840, 2003.

Z. J. Zhao, J. H. Yang, X. Li, and S. H. Park, « Effect of substrate reflecting conditions on the curing of UV curable resin layers on aluminum and the formation of surface wavy structures, Mater. Lett, vol.164, pp.23-27, 2016.

D. Chandra and A. J. Crosby, « Self-Wrinkling of UV-Cured Polymer Films, Adv. Mater, vol.23, pp.3441-3445, 2011.

B. Menaa, M. Takahashi, P. Innocenzi, and T. Yoko, « Crystallization in hybrid organicinorganic materials induced by self-organization in basic conditions, Chem. Mater, vol.19, issue.8, pp.1946-1953, 2007.

B. Boury, R. J. Corriu, P. Delord, and V. L. Strat, « Structure of silica-based organicinorganic hybrid xerogel, J. Non. Cryst. Solids, vol.265, issue.2, pp.41-50, 2000.

B. Boury and R. J. Corriu, « Auto-organisation of hybrid organic -inorganic materials prepared by sol -gel process, Chem. Commun, vol.8, issue.8, pp.795-802, 2002.

S. Lana and A. Seddon, « X-Ray diffraction studies of sol-gel derived ORMOSILs based on combinations of tetramethoxysilane and trimethoxysilane, J. Sol-Gel Sci. Tech, vol.13, pp.461-466, 1998.

L. Ni, A. Chemtob, C. Croutxé-barghorn, J. Brendlé, L. Vidal et al., « Photoinduced synthesis and ordering of lamellar n-alkylsiloxane films, J. Mater. Chem, vol.22, issue.2, pp.643-652, 2012.

I. Vukovic, G. T. Brinke, and E. K. Loos, « Block copolymer template-directed synthesis of well-ordered metallic nanostructures, Polymer (Guildf), vol.54, issue.11, pp.2591-2605, 2013.

J. J. Roa, G. Oncins, J. Diaz, F. Sanz, and M. Segarra, « Calculation of Young's modulus value by means of AFM », Recent Pat. Nanotechnol, vol.5, pp.27-36, 2011.

Z. Ahmad, Polymeric Dielectric Materials, p.450, 2012.

D. G. Archer and P. Wang, « The Dielectric Constant of Water and Debye-Hückel Limiting Law Slopes, J. Phys. Chem. Ref. data, vol.19, issue.2, pp.371-411, 1990.

N. L. Thomas, « The barrier properties of paint coatings, Prog. Org. Coatings, vol.19, issue.2, pp.101-121, 1991.

J. L. Delplancke, S. Berger, X. Lefèbvre, D. Maetens, A. Pourbaix et al., « Filiform corrosion: Interactions between electrochemistry and mechanical properties of the paints, Prog. Org. Coatings, vol.43, pp.64-74, 2001.

T. Fletcher, « Ion-Exchanged pigments for anticorrosive coatings, J. coatings Technol, pp.28-39, 2013.

R. A. Cayless and D. A. Pippard, The British Petroleum Company), « Corrosion inhibitors, methods of producing them and protective coatings containing them. », EP0046057B1, 1984.

T. E. Fletcher, The British Petroleum Company), « Corrosion-inhibiting composition, 1992.

A. Forsgren, Corrosion Control Through Organic Coatings, 2006.

R. Romagnoli, M. C. Deyá, and B. Del-amo, « The mechanism of the anticorrosive action of calcium-exchanged silica, Surf. Coatings Int. Part B Coatings Trans, vol.86, issue.2, pp.135-141, 2003.

T. Prosek and D. Thierry, « A model for the release of chromate from organic coatings, Prog. Org. Coatings, vol.49, issue.3, pp.209-217, 2004.

P. Visser, H. Terryn, and J. M. Mol, « On the importance of irreversibility of corrosion inhibitors for active coating protection of AA2024-T3 », Corros. Sci, vol.140, pp.272-285, 2018.

S. G. Emad, X. Zhou, S. B. Lyon, G. E. Thompson, Y. Liu et al., Prog. Org. Coatings

D. G. Shchukin, M. Zheludkevich, K. Yasakau, S. Lamaka, M. G. Ferreira et al., Layer-by-layer assembled nanocontainers for self-healing corrosion ANNEXE 1, vol.245

L. .. Microscopie-a-force-atomique, ANNEXE, vol.2

. .. References,

, Compréhension des mécanismes d'inhibition de la corrosion dans le cadre de revêtements hybrides pour pièces aéronautiques Anai?s Even, 2019.

. Erichsen, Applicateurs filmographes manuels et automatiques, 2019.

D. Sur,

G. Bouvet, Relations entre microstructure et propriétés physico-chimiques et mécaniques de revêtements époxy modèles, 2014.

D. Carriou, « Etude dynamique et structurale de biomolécules par microscopie à force atomique HS-AFM. Application à une petite protéine de choc thermique sHsp, 2012.

J. Rivoal and C. Frétigny, Microscopie à force atomique (AFM) », R1394 V1, 2005.

M. A. Hussain, A. Memic, N. S. Alothmani, and R. W. , Al-dhaheri, « Characterization of Fibrous Scaffold using Quantitative Nano-Mechanical Mapping Mode of Atomic Force Microscope Characterization of Fibrous Scaffold using Quantitative Nano-Mechanical Mapping Mode of Atomic Force Microscope », Int. J. Basic Appl. Biol, vol.2, issue.6, pp.364-367, 2015.