, Dans la première section de ce chapitre, la Sec. 6.1, nous avons montré qu'il est possible dans le contexte de la simulation d'un circuit magnétique feuilleté en 2-D de considérer les pertes par courant de Foucault dans l'épaisseur des tôles, en utilisant un modèle magnétique dynamique (MMD)

À. Ensuite and . La-sec, 6.2, nous avons résolu l'équation de diffusion 1-D linéaire qui décrit la dynamique des champs magnétiques dans l'épaisseur d'une tôle avec une perméabilité magnétique constante. À partir de cette solution, nous avons développé un MMD qui permet de prendre en compte l

À. Enfin and . La-sec, 3, nous avons proposé une approche pour réinterpréter le MMD développé à la Sec. 6.2 dans le cas d'une tôle avec une propriété magnétique locale isotrope non linéaire soumise à une excitation uniaxiale. Le MMD proposé est valable à basse fréquence (< 100 Hz), mais il n'offre pas un niveau de précision suffisant à plus haute fréquence. Nous avons toutefois montré qu'un modèle EF 1-D qui considère adéquatement l'équation de diffusion non linéaire dans l, vol.6

, Pour terminer, nous listons ici quelques pistes qui nous semble prometteuses en vue de poursuivre ce travail de recherche

, Étant donné que cette hypothèse est loin de faire consensus dans la communauté du calcul numérique de champs magnétiques, il serait d'une grande valeur scientifique d'en déterminer précisément les limites, autant pour les circuits magnétiques massifs que feuilletés. Pour ce faire, il serait d'une part nécessaire d'utiliser une source de courant permettant des montées très rapides afin d'obtenir des mesures plus à haute fréquence. D'autre part

, Dans le cas où des mesures des propriétés intrinsèques à plus haute fréquence des aciers seraient disponibles, il pourrait être envisageable de mesurer le temps de relaxation du mouvement des parois des domaines magnétiques afin d

, il serait possible de déterminer la dépendance en températures des paramètres B r , B sat , H c et s du modèle P-Max identifié avec la méthode EFG-4P (voir Sec. 3.2.4). Ce modèle P-Max avec une dépendance en température pourrait servir pour modéliser la démagnétisation des aimants permanents, À partir de mesures de cycles B-H à différentes températures

, Il serait également possible de rendre le modèle P-Max anisotrope en considérant des fonctions F(H) et G(H), qui dépendent de l'orientation du champ magnétique. Encore une fois, des mesures appropriées devront être disponibles pour réaliser ce travail de modélisation

, Nous avons montré les limites du modèle magnétique dynamique que nous avons développé au chapitre 6 pour le cas d'une tôle avec des propriétés magnétiques hystérétique fortement non linéaires (voir Sec. 6.3.4)

O. Gutfleisch, Magnetic materials and devices for the 21st century : Stronger, lighter, and more energy efficient, Advanced Materials, vol.23, pp.821-842, 2011.

, on implementing Directive 2009/125/EC of the European Parliament with regard to small, medium and large power transformers, Commission Regulation, vol.548, pp.1-15, 2014.

. Legrand, Écotransformateurs secs haute performance, pp.1-15, 2015.

A. , Altair Flux TM : Electromagnetic, Electric, and Thermal Analysis, 2019.

M. Getzlaff, Fundamentals of Magnetism, 1 er éd, 2008.

F. Preisach, Über die magnetische Nachwirkung, Zeitschrift für Physik, vol.94, issue.5, pp.277-302, 1935.

D. H. Everett, A General Approach to Hysteresis Part 4 : An alternative formulation of the domain model, Trans. Faraday Soc, vol.51, pp.1551-1557, 1955.

I. Mayergoyz, Mathematical Models Of Hysteresis And Their Applications, 1 er éd, 2003.

J. J. Gyselinck, Calculation of no load losses in an induction motor using an inverse vector Preisach model and an eddy current loss model, IEEE Transactions on Magnetics, vol.36, pp.856-860, 2000.

M. Kuczmann, Vector Preisach hysteresis modeling : Measurement, identification and application, Physica B : Condensed Matter, vol.406, pp.1403-1409, 2011.

E. Dlala, Efficient algorithms for the inclusion of the Preisach hysteresis model in nonlinear finite-element methods, IEEE Transactions on Magnetics, vol.47, issue.2, pp.395-408, 2011.

F. Ossart, T. A. Phung, and G. Meunier, Comparison between various hysteresis models and experimental data, Journal of Applied Physics, vol.67, pp.5379-5381, 1990.

D. A. Philips, L. Dupré, and J. A. Melkebeek, Comparison of Jiles and Preisach hysteresis models in magnetodynamics, IEEE Transactions on Magnetics, vol.31, pp.3551-3553, 1995.

L. Dupré and J. Melkebeek, Electromagnetic hysteresis modelling : from material science to finite element analysis of devices, International Compumag Society Newsletter, vol.10, pp.4-15, 2003.

A. Benabou, S. Clénet, and F. Piriou, Comparison of Preisach and Jiles-Atherton models to take into account hysteresis phenomenon for finite element analysis, Journal of Magnetism and Magnetic Materials, vol.261, issue.2, pp.139-160, 2003.

D. C. Jiles and D. L. Atherton, Theory of Ferromagnetic Hysteresis, Journal of Magnetism and Magnetic Materials, vol.61, pp.48-60, 1986.

A. J. Bergqvist, A simple vector generalization of the Jiles-Atherton model of hysteresis, IEEE Transactions on Magnetics, vol.32, issue.5, pp.4213-4215, 1996.

N. Sadowski, An inverse Jiles-Atherton model to take into account hysteresis in time-stepping finite-element calculations, IEEE Transactions on Magnetics, vol.38, issue.2, pp.797-800, 2002.

J. Gyselinck, Incorporation of a Jiles-Atherton vector hysteresis model in 2D FE magnetic field computations : Application of the Newton-Raphson method, COMPEL : The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol.23, pp.685-693, 2004.

M. V. Da-luz, Three-phase transformer modeling using a vector hysteresis model and including the eddy current and the anomalous losses, IEEE Transactions on Magnetics, vol.46, pp.3201-3204, 2010.

J. P. Bastos, A differential permeability 3-D formulation for anisotropic vector hysteresis analysis, IEEE Transactions on Magnetics, vol.50, issue.2, pp.3-6, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00957434

A. Salvini and F. R. Fulginei, Genetic algorithms and neural networks generalizing the Jiles -Atherton model of static hysteresis for dynamic loops, IEEE Transactions on Magnetics, vol.38, issue.2 I, pp.873-876, 2002.

A. J. Bergqvist, Magnetic Vector Hysteresis Model with Dry Friction-like Pinning, Physica B, vol.233, pp.342-347, 1997.

T. Matsuo and M. Shimasaki, An identification method of Play model with inputdependent shape function, IEEE Transactions on Magnetics, vol.41, pp.3112-3114, 2005.

M. Aquino, A New Vector Model of Magnetic Hysteresis Based on a Novel Class of Play Hysterons, IEEE Transactions on Magnetics, vol.39, issue.5, pp.2537-2539, 2003.

D. Lin, P. Zhou, and A. Bergqvist, Improved Vector Play Model and Parameter Identification for Magnetic Hysteresis Materials, IEEE Transactions on Magnetics, vol.50, issue.2, pp.357-360, 2014.

R. Mitsuoka, A vector Play model for finite-element eddy-current analysis using the Newton-Raphson method, IEEE Transactions on Magnetics, vol.49, issue.5, pp.1689-1692, 2013.

T. Matsuo and M. Shimasaki, Representation theorems for Stop and Play models with input-dependent shape functions, IEEE Transactions on Magnetics, vol.41, issue.5, pp.1548-1551, 2005.

C. Guérin, Using a Jiles-Atherton vector hysteresis model for isotropic magnetic materials with the finite element method, Newton-Raphson method, and relaxation procedure, International Journal of Numerical Modelling, pp.1-12, 2015.

J. Gyselinck, Incorporation of vector hysteresis and eddy current losses in 2D FE Magnetodynamics, Proceedings of ELECTRIMACS, vol.99, pp.37-44, 1999.

N. Bowler, Frequency-dependence of relative permeability in steel, dans AIP Conference Proceedings, vol.820, pp.1269-1276, 2006.

S. Dobák, A comprehensive complex permeability approach to soft magnetic bulk cores from pure or resin coated Fe and pulverized alloys at elevated temperatures, Journal of Alloys and Compounds, vol.695, 1998.

A. Hrabec, Domain wall dynamics in magnetic nanostructures : Effect of magnetic field and electric current, 2012.
URL : https://hal.archives-ouvertes.fr/tel-00767418

K. Mcmeekin, Mesure d'hystérésis magnétique volumique de l'acier 4340 en fonction de la température, 2016.

M. De-wulf, L. Dupre, and J. Melkebeek, Quasistatic measurements for hysteresis modeling, Journal of Applied Physics, vol.87, pp.5239-5242, 2000.

H. Pfützner, L. Member, and G. Shilyashki, Theoretical Basis for Physically Correct Measurement and Interpretation of Magnetic Energy Losses, IEEE Transactions on Magnetics, vol.54, 2018.

J. Gyselinck, Calculation of eddy currents and associated losses in electrical steel laminations, IEEE Transactions on Magnetics, vol.35, pp.1191-1194, 1999.

D. A. Philips and L. R. Dupré, Macroscopic fields in ferromagnetic laminations taking into account hysteresis and eddy current effects, Journal of Magnetism and Magnetic Materials, vol.160, pp.5-10, 1996.

M. J. Hofmann and H. G. Herzog, Modeling Magnetic Power Losses in Electrical Steel Sheets in Respect of Arbitrary Alternating Induction Waveforms : Theoretical Considerations and Model Synthesis, IEEE Transactions on Magnetics, vol.51, issue.2, pp.1-11, 2015.

T. Chevalier, A new dynamic hysteresis model for electrical steel sheet, Physica B : Condensed Matter, vol.275, pp.197-201, 2000.

G. Bertotti, General Properties of Power Losses in Soft Ferromagnetic Materials, IEEE Transactions on Magnetics, vol.24, issue.1, pp.621-630, 1988.

A. J. Moses, Energy efficient electrical steels : Magnetic performance prediction and optimization, Scripta Materialia, vol.67, pp.560-565, 2012.

R. H. Pry and C. P. Bean, Calculation of the energy loss in magnetic sheet materials using a domain model, Journal of Applied Physics, vol.29, pp.532-533, 1958.

S. E. Zirka, Loss separation in nonoriented electrical steels, IEEE Transactions on Magnetics, vol.46, issue.2, pp.286-289, 2010.

S. E. Zirka, Inverse hysteresis models for transient simulation, IEEE Transactions on Power Delivery, vol.29, issue.2, pp.552-559, 2014.

R. M. Vecchio, An Efficient Procedure For Modeling Complex Hysteresis Processes In Ferromagnetic Materials, IEEE Transactions on Magnetics, vol.16, issue.5, pp.809-811, 1980.

E. and D. Torre, The Preisach Model, pp.31-52, 1999.

G. Consolo, About identification of scalar Preisach functions of soft magnetic materials, IEEE Transactions on Magnetics, vol.42, pp.923-926, 2006.

Z. Szabó, Identification procedures for scalar Preisach model, Physica B : Condensed Matter, vol.343, pp.142-147, 2004.

A. Bhattacharjee, A. K. Mohanty, and A. Chatterjee, Expansion of Preisach density in magnetic hysteresis using general basis functions, Applied Mathematics and Computation, vol.341, pp.418-427, 2019.

V. I. Lebedev, Spherical quadrature formulas exact to orders 25-29, Siberian Mathematical Journal, vol.18, issue.1, pp.99-107, 1977.

H. Akima, Algorithm 760 : Rectangular-grid-data surface fitting that has the accuracy of a bicubic polynomial, ACM Trans. Math. Softw, vol.22, pp.357-361, 1996.

W. H. Press, Numerical Recipes in C : The Art of Scientific Computing, 2 e éd, 1992.

G. Meunier, The Finite Element Method for Electromagnetic Modeling, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00364741

P. Dular, Modélisation du champ magnétique et des courants induits dans des systèmes tridimensionnels non linéaires, 1996.

K. Fujiwara, Method for Determining Relaxation Factor for Modified Newton-Raphson Method, IEEE Transactions on Magnetics, vol.29, issue.2, pp.1962-1965, 1993.

E. Dlala, A. Belahcen, and A. Arkkio, Locally convergent fixed-point method for solving time-stepping nonlinear field problems, IEEE Transactions on Magnetics, vol.43, issue.11, pp.3969-3975, 2007.

, A Fast Fixed-Point Method for Solving Magnetic Field Problems in Media of Hysteresis, IEEE Transactions on Magnetics, vol.44, pp.1214-1217, 2008.

E. Dlala and A. Arkkio, Analysis of the convergence of the fixed-point method used for solving nonlinear rotational magnetic field problems, IEEE Transactions on Magnetics, vol.44, pp.473-478, 2008.

O. Bottauscio, Description of TEAM Problem : 32 A Test-Case for Validation of Magnetic Field Analysis with Vector Hysteresis, Istituto Elettrotecnico Nazionale Galileo Ferraris, 2004.

P. Massé, B. Morel, and T. Breville, A Finite Element Prediction Correction Scheme for Magneto-Thermal Coupled Problem During Curie Transition, IEEE Transactions on Magnetics, vol.21, issue.5, pp.1871-1873, 1985.

K. Hoffmann, A Vector Jiles -Atherton Model for Improving the FEM Convergence, IEEE Transactions on Magnetics, vol.53, pp.1-4, 2017.

O. Bottauscio and M. Chiampi, Analysis of laminated cores through a directly coupled 2-D/1-D electromagnetic field formulation, IEEE Transactions on Magnetics, vol.38, issue.5, pp.2358-2360, 2002.

J. Gyselinck and P. Dular, A Time-Domain Homogenization Technique for Laminated Iron Cores in 3D Finite Element Models, IEEE Transactions on Magnetics, vol.40, issue.2, pp.856-859, 2004.

Y. Shindo, Cauer Circuit Representation of Homogenized Eddy-Current Field Based on Legendre Expansion in Magnetic Sheet, IEEE Transactions on Magnetics, vol.52, pp.2-3, 2016.

G. Arfken and H. Weber, Mathematical Methods For Physicists, 6 e éd, 2005.