. .. , 2.2 Development of a GSA-based method for shear angle measurements . 137 6.2.2.1 Full-field measurements

. .. Experimental-results, 140 6.3.1 Description of the parts formed

, 149 6.4.1 Validation of the model implementation: virtual bias extension tests . 149 6.4.1.1 Mesh and element type selection

, Finite element model of the forming setup

. .. Isothermal-forming,

.. .. , , p.159

. .. Conclusion,

.. .. Objectifs-de-la-thèse,

, Modélisation du comportement mécanique des composites tissés et méthodes de caractérisation expérimentales associées

. .. , Modélisation du chauffage radiatif dans le procédé de thermoformage, p.185

. .. , 2 Caractérisation de la conductance de contact, p.186

, Étude expérimentale et numérique du préchauffage de préformes composites dans un four infrarouge

, Caractérisation expérimentale et modélisation des propriétés mécaniques des composites thermoplastiques tissés à haute température

, Mise en forme de pièces hémisphériques PA66/verre: étude expérimentale et numérique

, Simulation numérique de la mise en forme

, Conclusion et perspectives des travaux

F. Abbassi, I. Elfaleh, S. Mistou, A. Zghal, M. Fazzini et al., Experimental and numerical investigations of a thermoplastic composite (carbon/PPS) thermoforming, Structural Control and Health Monitoring, vol.18, p.26, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00812689

R. Akkerman, Processing and properties of thermoplastic composite materials, Proceedings of SIP-IMASM2018, vol.5, 2018.

]. A. Akué-asséko+2015, B. Asséko, F. Cosson, Y. L. Schmidt, E. Maoult et al., Laser transmission welding of composites-Part A: Thermo-physical and optical characterization of materials, Infrared Physics & Technology, vol.72, pp.293-299, 2015.

M. Amiot, L'auto cherche son régime minceur, Les Echos, 2014.

S. Andrieu, F. Schmidt, and Y. L. Maoult, Experimental and numerical infrared heating of thermoplastic sheet during thermoforming process, Proceedings of the 20th Polymer Processing Society annual meeting PPS2004, p.23, 2004.
URL : https://hal.archives-ouvertes.fr/hal-01796841

S. Andrieu, Étude expérimentale et numérique du chauffage infrarouge de plaques thermoplastiques pour le thermoformage, 2005.

M. F. Ashby, Materials selection in mechanical design, p.10, 1992.
URL : https://hal.archives-ouvertes.fr/jpa-00251707

, ASTM. ASTM D1777-96: Standard Test Method for Thickness of Textile Materials. American Society for Testing and Materials (ASTM), p.65, 2007.

, ASTM. ASTM D5035-11: Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method). American Society for Testing and Materials (ASTM), p.118, 2015.

P. Badel, E. Vidal-sallé, and P. Boisse, Large deformation analysis of fibrous materials using rate constitutive equations, Computers & Structures, vol.86, p.36, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00381428

P. Badel, E. Vidal-sallé, E. Maire, and P. Boisse, Simulation and tomography analysis of textile composite reinforcement deformation at the mesoscopic scale, Composites Science and Technology, vol.68, pp.2433-2440, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00850080

H. M. Baek, A. J. Giacomin, and M. J. Wurz, Sag in commercial thermoforming, AIChE Journal, vol.60, issue.4, p.106, 2013.

G. Barbagallo, A. Madeo, I. Azehaf, I. Giorgio, F. Morestin et al., Bias extension test on an unbalanced woven composite reinforcement: Experiments and modeling via a second-gradient continuum approach, Journal of Composite Materials, vol.51, issue.2, p.25, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01719681

P. Beardmore and C. F. Johnson, The potential for composites in structural automotive applications, Composites Science and Technology, vol.26, p.3, 1986.

N. Bédard and S. Brunet, Evaluation d'émetteurs infrarouges électriques et de radiants à gaz, Proc. 13th Int. Congr. on Electricity Applications, p.12, 1996.

N. Bédard, Laboratory testing of radiant gas burners and electric infrared emitters, In: Experimental Heat Transfer, vol.11, issue.3, p.12, 1998.

A. M. Bento, K. D. Roth, and Y. Wang, The Impact of CAFE Standards on Innovation in the US Automobile Industry, Proceedings of the 2015 AAEA & WAEA Joint Annual Meeting, 2015.

Y. Benveniste, Effective thermal conductivity of composites with a thermal contact resistance between the constituents: Nondilute case, Journal of Applied Physics, vol.61, p.67, 1987.

N. Bernet, V. Michaud, P. E. Bourban, and J. A. Manson, An Impregnation Model for the Consolidation of Thermoplastic Composites Made from Commingled Yarns, Journal of Composite Materials, vol.33, p.41, 1999.

N. Bernet, V. Michaud, P. Bourban, and J. E. Månson, Commingled yarn composites for rapid processing of complex shapes, Composites Part A: Applied Science and Manufacturing, vol.32, issue.11, pp.1613-1626, 2001.

H. E. Bersee and L. M. Robroek, The role of the thermoplastic matrix in forming processes of composite materials, Composites Manufacturing, vol.2, p.13, 1991.

É. Bessard, Matériaux composites structuraux à base PEEK élaborés par thermocompression dynamique: relation procédé-propriétés, p.59, 2012.

D. Bhattacharyya, M. Bowis, and K. Jayaraman, Thermoforming woodfibre-polypropylene composite sheets, Composites Science and Technology, vol.63, pp.353-365, 2003.

X. X. Bian, Y. Z. Gu, J. Sun, M. Li, W. P. Liu et al., Effects of processing parameters on the forming quality of C-shaped thermosetting composite laminates in hot diaphragm forming process, In: Applied Composite Materials, vol.20, p.14, 2013.

D. Bian, G. Satoh, and Y. L. Yao, The Laser Interlaminar Reinforcement of Continuous Glass Fiber Composites, Journal of Manufacturing Science and Engineering, vol.137, issue.6, p.62, 2015.

M. Biron, Thermoplastics and Thermoplastic Composites: Technical Information for Plastics Users, p.43, 2007.

P. Boisse, A. Zouari, and . Gasser, A mesoscopic approach for the simulation of woven fibre composite forming, Composites Science and Technology, vol.65, p.25, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00020532

P. Boisse, N. Hamila, E. Vidal-sallé, and F. Dumont, Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses, Composites Science and Technology, vol.71, issue.5, pp.683-692, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00578046

P. Boisse, N. Hamila, E. Guzman-maldonado, A. Madeo, G. Hivet et al.,

. Dell'isola, The bias-extension test for the analysis of in-plane shear properties of textile composite reinforcements and prepregs: a review, International Journal of Material Forming, vol.10, pp.473-492, 2016.

P. Boisse, J. Colmars, N. Hamila, N. Naouar, and Q. Steer, Bending and wrinkling of composite fiber preforms and prepregs. A review and new developments in the draping simulations, Composites Part B: Engineering, pp.234-249, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02173882

R. Bonnaire, J. Patou, E. De-luycker, T. Cutard, and G. Bernhart, Utilisation de la corrélation d'images pour le suivi de la mise en forme de renfort textile dans le cadre de la fabrication de pièces composites pour l'aéronautique, p.23

C. Français-de-mécanique, , p.137, 2017.

M. Bordival, F. M. Schmidt, Y. L. Maoult, B. Cosson, and B. Plantamura, A ray tracing method to simulate the infrared heating of semi-transparent thermoplastics, International Journal of Material Forming, vol.3, issue.S1, p.24, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01760283

P. Bourban, N. Bernet, J. Zanetto, and J. E. Månson, Material phenomena controlling rapid processing of thermoplastic composites, Composites Part A: Applied Science and Manufacturing, vol.32, pp.1045-1057, 2001.

M. M. Bouwman, T. G. Donderwinkel, and S. Wijskamp, Overmoulding -An Integrated Design Approach for Dimensional Accuracy and Strength of structural Parts, Proceedings of the 3rd International Conference on Thermoplastic Composites (ITHEC). 2016 (cit, p.3

D. Bradley and G. Roth, Adaptive Thresholding using the Integral Image, Journal of Graphics Tools, vol.12, p.172, 2007.

J. Brandrup, E. H. Immergut, and E. A. Grulke, Polymer Handbook, vol.69, p.68, 1998.

F. Brinken and H. Potente, Some considerations of heat-transfer problems in thermoforming, Polymer Engineering and Science, vol.20, p.20, 1980.

[. Brite-euram, Industrial press forming of continuous fibre reinforced thermoplastic sheets and the development of numerical simulation tools, BE, vol.5092, p.21, 1992.

E. Brodu, M. Balat-pichelin, J. Sans, and J. C. Kasper, Evolution of the emissivity of tungsten at high temperature with and without proton bombardment, Acta Materialia, vol.84, p.51, 2015.
URL : https://hal.archives-ouvertes.fr/hal-02327218

M. T. Brogan and P. F. Monaghan, Thermal simulation of quartz tube infrared heaters used in the processing of thermoplastic composites, Composites Part A: Applied Science and Manufacturing, vol.27, pp.301-306, 1996.

R. Brooks, Forming technology for thermoplastic composites, Composites Forming Technologies, pp.256-276, 2007.

K. Buet-gautier and P. Boisse, Experimental analysis and modeling of biaxial mechanical behavior of woven composite reinforcements, Experimental Mechanics, vol.41, issue.3, p.26, 2001.

A. R. Bunsell, Fibres for composite reinforcement: properties and microstructures, Composite Reinforcements for Optimum Performance, p.25, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00662332

P. Bussetta and N. Correia, Numerical forming of continuous fibre reinforced composite material: A review, Composites Part A: Applied Science and Manufacturing, vol.113, p.33, 2018.

W. Cai, Développement et applications de modèles d'échanges radiatifs par suivi de rayons, p.23, 1992.

M. Cakmak and A. Dutta, Instrumented thermoforming of advanced thermoplastic composites. II: Dynamics of double curvature part formation and structure development from PEEK/carbon fiber prepreg tapes, Polymer Composites, vol.12, issue.5, p.13, 1991.

. Calex, , p.91, 2015.

J. Cao, P. Xue, X. Peng, and N. Krishnan, An approach in modeling the temperature effect in thermo-stamping of woven composites, Composite Structures, vol.61, pp.413-420, 2003.

J. Cao, Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results, Composites Part A: Applied Science and Manufacturing, vol.39, issue.6, pp.1037-1053, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00437730

E. Capelle, P. Ouagne, D. Soulat, and D. Duriatti, Complex shape forming of flax woven fabrics: Design of specific blank-holder shapes to prevent defects, Composites Part B: Engineering, vol.62, p.137, 2014.

R. Carminati, Transports en milieux dilués, p.83, 2006.

B. Cassel and R. Packer, Modulated temperature DSC and the DSC 8500: a step up in performance, p.66, 2010.

S. F. Cassidy and P. F. Monaghan, Effect of contact resistances on the thermal conductivity of an unconsolidated fibre-reinforced thermoplastic prepreg stack, Composites Manufacturing, vol.5, p.79, 1994.

P. V. Cavallaro, A. M. Sadegh, and C. J. Quigley, Decrimping Behavior of Uncoated Plain-woven Fabrics Subjected to Combined Biaxial Tension and Shear Stresses, Textile Research Journal, vol.77, p.26, 2007.

G. Cazaux, Faisabilité des procédés LCM pour l'élaboration de composites renfort continu à matrice thermoplastique polyamide, p.4, 2016.

. Ceramicx, HeatWorks 14, vol.160, p.12, 2015.

P. Chalmovianský and B. Jüttler, Filling Holes in Point Clouds, Lecture Notes in Computer Science, p.138, 2003.

C. Champin, Modélisation 3D du chauffage par rayonnement infrarouge et de l'étirage-soufflage de corps creux en, p.24, 2007.

S. Chang, S. Charma, and M. P. Sutcliffe, Microscopic investigation of tow geometry of a dry satin weave fabric during deformation, Composites Science and Technology, vol.63, issue.1, p.29, 2003.

A. Charmetant, E. Vidal-sallé, and P. Boisse, Hyperelastic modelling for mesoscopic analyses of composite reinforcements, Composites Science and Technology, vol.71, p.36, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00938547

L. W. Cheah, Cars on a diet: the material and energy impacts of passenger vehicle weight reduction in the US, 2010.

J. Chen, J. A. Sherwood, P. Buso, S. Chow, and D. Lussier, Stamping of continuous fiber thermoplastic composites, Polymer Composites, vol.21, p.15, 2000.

Y. K. Chen, O. P. Modi, A. S. Mhay, A. Chrysanthou, and J. M. O'sullivan, The effect of different metallic counterface materials and different surface treatments on the wear and friction of polyamide 66 and its composite in rolling-sliding contact, p.152, 2003.

Z. Chen and L. Ye, A micromechanical compaction model for woven fabric preforms. Part II: Multilayer, Composites Science and Technology, vol.66, p.83, 2006.

Z. Chen, L. Ye, and T. Kruckenberg, A micromechanical compaction model for woven fabric preforms. Part I: Single layer, Composites Science and Technology, vol.66, p.120, 2006.

M. Chen, G. Zak, and P. J. Bates, Effect of carbon black on light transmission in laser welding of thermoplastics, Journal of Materials Processing Technology, vol.211, issue.1, p.62, 2011.

S. Chen, L. T. Harper, A. Endruweit, and N. A. Warrior, Formability optimisation of fabric preforms by controlling material draw-in through in-plane constraints, Composites Part A: Applied Science and Manufacturing, vol.76, p.31, 2015.

C. L. Choy, Thermal conductivity of polymers, Polymer 18, vol.10, p.67, 1977.

B. T. Chung and M. M. Kermani, Radiation View Factors From a Finite Rectangular Plate, Journal of Heat Transfer, vol.111, p.49, 1989.

S. W. Churchill and H. Ozoe, A Correlation for Laminar Free Convection From a Vertical Plate, Journal of Heat Transfer, vol.95, p.54, 1973.

M. F. Cohen and D. P. Greenberg, The hemi-cube: a radiosity solution for complex environments, Proceedings of the 12th annual conference on Computer graphics and interactive techniques -SIGGRAPH '85, p.19, 1985.

, COMSOL Multiphysics Reference Manual, p.49

, Heat Transfer Module User's Guide, p.49

[. Comsol, Heat Transfer Module User's Guide, p.106, 2018.

M. Connor, S. Toll, J. E. Månson, and A. G. Gibson, A Model for the Consolidation of Aligned Thermoplastic Powder Impregnated Composites, Journal of Thermoplastic Composite Materials, vol.8, p.43, 1995.

M. Connor, Consolidation mechanisms and interfacial phenomena in thermoplastic powder impregnated composites, p.43, 1995.

, Correlated Solutions] Correlated Solutions. Vic-3D v7 -Reference manual. Correlated Solutions (cit, p.137

B. Cosson, F. Schmidt, Y. L. Maoult, and M. Bordival, Infrared heating stage simulation of semi-transparent media (PET) using ray tracing method, International Journal of Material Forming, vol.4, issue.1, p.24, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01709492

G. Cowper and P. Symonds, Strain hardening and strain-rate effects in the impact loading of cantilever beams, p.131, 1957.

G. Creech and A. K. Pickett, Meso-modelling of Non-Crimp Fabric composites for coupled drape and failure analysis, Journal of Materials Science, vol.41, p.36, 2006.

J. E. Cunningham, P. F. Monaghan, M. T. Brogan, and S. F. Cassidy, Modelling of pre-heating of flat panels prior to press forming, Composites Part A: Applied Science and Manufacturing, vol.28, issue.1, pp.17-24, 1997.

J. E. Cunningham, P. F. Monaghan, and M. T. Brogan, Predictions of the temperature profile within composite sheets during pre-heating, Composites Part A: Applied Science and Manufacturing, vol.29, issue.1-2, pp.51-61, 1998.

D. Cutolo, P. Canonico, M. Marchetti, and A. M. Porcari, Analysis of diaphragm forming of powder impregnated thermoplastic composites, Composites Manufacturing, vol.3, p.44, 1992.

L. Daelemans, J. Faes, S. Allaoui, G. Hivet, M. Dierick et al., Finite element simulation of the woven geometry and mechanical behaviour of a 3D woven dry fabric under tensile and shear loading using the digital element method, Composites Science and Technology, vol.137, p.34, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01763184

L. M. Dangora, C. J. Hansen, C. J. Mitchell, J. A. Sherwood, and J. C. Parker, Challenges associated with shear characterization of a cross-ply thermoplastic lamina using picture frame tests, Composites Part A: Applied Science and Manufacturing, vol.78, pp.181-190, 2015.

A. Dasgupta and R. K. Agarwal, Orthotropic Thermal Conductivity of Plain-Weave Fabric Composites Using a Homogenization Technique, Journal of Composite Materials, vol.26, p.67, 1992.

A. Dasgupta, R. K. Agarwal, and S. M. Bhandarkar, Three-dimensional modeling of woven-fabric composites for effective thermo-mechanical and thermal properties, Composites Science and Technology, vol.56, issue.3, p.34, 1996.

M. Dauphin, S. Albin, M. E. Hafi, Y. L. Maoult, and F. M. Schmidt, Towards thermal model of automotive lamps, Proceedings of the 2012 International Conference on Quantitative InfraRed Thermography. QIRT Council, p.74, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01741831

]. O. De-almeida+2012, E. De-almeida, G. Bessard, and . Bernhart, Influence of processing parameters and semi-finished product on consolidation of carbon/peek laminates, Proceedings of the 15th European Conference on Composite Materials -ECCM15, p.44, 2012.

F. Desvignes, Rayonnements optiques: radiometrie, photometrie, p.51, 1997.

O. Döbrich, T. Gereke, O. Diestel, S. Krzywinski, and C. Cherif, Decoupling the bending behavior and the membrane properties of finite shell elements for a correct description of the mechanical behavior of textiles with a laminate formulation, Journal of Industrial Textiles, vol.44, issue.1, p.150, 2013.

V. Donadei, F. Lionetto, M. Wielandt, A. Offringa, and A. Maffezzoli, Effects of Blank Quality on Press-Formed PEKK/Carbon Composite Parts, Materials 11, p.40, 2018.

K. Y. Donaldson, B. D. Trandell, Y. Lu, D. P. Hasselman, and N. ,

. Maurer, Effect of Delamination on the Transverse Thermal Conductivity of a SiC-Fiber-Reinforced SiC-Matrix Composite, Journal of the American Ceramic Society, vol.81, issue.6, p.83, 2005.

Z. Dong and C. T. Sun, Testing and modeling of yarn pull-out in plain woven Kevlar fabrics, Composites Part A: Applied Science and Manufacturing, vol.40, p.127, 2009.

Y. Duan, M. Keefe, T. A. Bogetti, and B. Powers, Finite element modeling of transverse impact on a ballistic fabric, International Journal of Mechanical Sciences, vol.48, issue.1, p.36, 2006.

F. Dumont, Mesures de champs pour des essais de cisaillement sur des renforts tissésField measurements for shear tests on woven reinforcements, Mécanique & Industries, vol.4, issue.6, p.28, 2003.

D. Durville, I. Baydoun, H. Moustacas, G. Périé, and Y. Wielhorski, Determining the initial configuration and characterizing the mechanical properties of 3D angle-interlock fabrics using finite element simulation, International Journal of Solids and Structures, vol.154, p.34, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01647143

D. Durville, Modélisation par éléments finis du comportement mécanique de structures textiles : de la fibre au tissu, Revue Européenne des Éléments Finis, vol.11, p.34, 2002.

D. Durville, A Finite Element Approach of the Behaviour of Woven Materials at Microscopic Scale, Mechanics of Microstructured Solids, p.34, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00274058

D. Durville, Simulation of the mechanical behaviour of woven fabrics at the scale of fibers, International Journal of Material Forming, vol.3, issue.S2, p.34, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00495110

]. A. El-bakali+2013, O. Bakali, J. De-almeida, M. Bikard, F. Villière et al., Simulation of IR Heating for Composite Stamping, Key Engineering Materials, vol.554, issue.557, pp.1523-1529, 2013.

]. E. El-rassy+2019, Y. Rassy, D. Billaud, and . Saury, Simultaneous and direct identification of thermophysical properties for orthotropic materials, Measurement 135, p.79, 2019.

Y. El-hage, S. Hind, and F. Robitaille, Thermal conductivity of textile reinforcements for composites, Journal of Textiles and Fibrous Materials, vol.1, p.79, 2018.

C. El-mazry, M. Ben-hassine, O. Correc, and X. Colin, Thermal oxidation kinetics of additive free polyamide 6-6, Polymer Degradation and Stability, vol.98, issue.1, p.29, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00984697

J. Faraj, N. Boyard, B. Pignon, J. Bailleul, D. Delaunay et al., Crystallization kinetics of new low viscosity polyamides 66 for thermoplastic composites processing, Thermochimica Acta, vol.624, pp.27-34, 2016.

J. Faraj, Analyse thermocinétique de la cristallisation en milieu confiné d'un composite à base d'une résine thermoplastique (Polyamide 66, vol.69, p.67, 2016.

D. G. Fink and H. W. Beaty, Standard Handbook for Electrical Engineers

. Mcgraw-hill, , p.52, 1978.

K. Friedrich, M. Hou, and J. Krebs, Thermoforming of continuous fibre/thermoplastic composite sheets, Composite Sheet Forming, p.11, 1997.

K. Friedrich and M. Hou, On stamp forming of curved and flexible geometry components from continuous glass fiber/polypropylene composites, Composites Part A: Applied Science and Manufacturing, vol.29, issue.3, p.14, 1998.

K. Friedrich and A. A. Almajid, Manufacturing Aspects of Advanced Polymer Composites for Automotive Applications, Applied Composite Materials, vol.20, p.3, 2012.

A. Gasser, P. Boisse, and S. Hanklar, Mechanical behaviour of dry fabric reinforcements. 3D simulations versus biaxial tests, Computational Materials Science, vol.17, issue.1, pp.7-20, 2000.

M. Gassoumi, S. Rolland-du-roscoat, P. Casari, P. J. Dumont, L. Orgéas et al., Shear behavior of thermoformed woven-textile thermoplastic prepregs: An analysis combining bias-extension test and X-ray microtomography, AIP Conference Proceedings, vol.1896, p.35
URL : https://hal.archives-ouvertes.fr/hal-01980318

S. Gatouillat, A. Bareggi, E. Vidal-sallé, and P. Boisse, Meso modelling for composite preform shaping -Simulation of the loss of cohesion of the woven fibre network, Composites Part A: Applied Science and Manufacturing, vol.54, p.36, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00934559

T. Gereke, O. Döbrich, M. Hübner, and C. Cherif, Experimental and computational composite textile reinforcement forming: A review, Composites Part A: Applied Science and Manufacturing, vol.46, p.33, 2013.

A. J. Giacomin, A. W. Mix, and O. Mahmood, Sag in thermoforming, Polymer Engineering & Science, vol.50, p.106, 2010.

J. L. Gorczyca, J. A. Sherwood, L. Liu, and J. Chen, Modeling of Friction and Shear in Thermostamping of Composites -Part I, Journal of Composite Materials, vol.38, pp.1911-1929, 2004.

J. L. Gorczyca-cole, J. A. Sherwood, and J. Chen, A friction model for thermostamping commingled glass-polypropylene woven fabrics, Composites Part A: Applied Science and Manufacturing, vol.38, p.143, 2007.

M. Grédiac, F. Sur, and B. Blaysat, The Grid Method for In-plane Displacement and Strain Measurement: A Review and Analysis, In: Strain, vol.52, issue.3, p.137, 2016.

C. Gröschel and D. Drummer, Forming of thermoplastic matrix composites with gas pressure -the influence of blank holder and sheet temperature on the forming pressure and drawing ratio, International Polymer Processing, vol.32, p.14, 2017.

W. Grouve, Weld strength of laser-assisted tape-placed thermoplastic composites, vol.106, p.64, 2012.

S. E. Gustafsson, Transient plane source techniques for thermal conductivity and thermal diffusivity measurements of solid materials, Review of Scientific Instruments, vol.62, issue.3, p.68, 1991.

E. Guzman-maldonado, N. Hamila, P. Boisse, and J. Bikard, Thermomechanical analysis, modelling and simulation of the forming of preimpregnated thermoplastics composites, Composites Part A: Applied Science and Manufacturing, vol.78, p.37, 2015.

E. Guzman-maldonado, N. Hamila, N. Naouar, G. Moulin, and P. Boisse, Simulation of thermoplastic prepreg thermoforming based on a viscohyperelastic model and a thermal homogenization, Materials & Design, vol.93, pp.431-442, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02174933

E. Guzman-maldonado, Modélisation et simulation de la mise en forme des composites préimprégnés à matrice thermoplastiques et fibres continues, Sciences Appliquées de Lyon, 2016.

S. P. Haanappel, U. Sachs, R. H. Ten-thije, B. Rietman, and R. Akkerman, Forming of thermoplastic composites, Key Engineering Materials, vol.504, p.94, 2012.

S. P. Haanappel, R. H. Ten-thije, U. Sachs, B. Rietman, and R. Akkerman, Formability analyses of uni-directional and textile reinforced thermoplastics, Composites Part A: Applied Science and Manufacturing, vol.56, pp.80-92, 2014.

N. Hamila, P. Boisse, F. Sabourin, and M. Brunet, A semi-discrete shell finite element for textile composite reinforcement forming simulation, International Journal for Numerical Methods in Engineering, vol.79, p.150, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00515898

N. Hamila and P. Boisse, Locking in simulation of composite reinforcement deformations, Composites Part A: Applied Science and Manufacturing, vol.53, p.150, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00934483

P. Harrison, M. J. Clifford, and A. C. Long, Shear characterisation of viscous woven textile composites: a comparison between picture frame and bias extension experiments, Composites Science and Technology, vol.64, p.31, 2004.

P. Harrison, F. Abdiwi, Z. Guo, P. Potluri, and W. R. Yu, Characterising the shear-tension coupling and wrinkling behaviour of woven engineering fabrics, Composites Part A: Applied Science and Manufacturing, vol.43, issue.6, p.33, 2012.

P. Harrison, R. Gomes, and N. Curado-correia, Press forming a 0/90 crossply advanced thermoplastic composite using the double-dome benchmark geometry, Composites Part A: Applied Science and Manufacturing, vol.54, pp.56-69, 2013.

F. Härtel and P. Harrison, Evaluation of normalisation methods for uniaxial bias extension tests on engineering fabrics, Composites Part A: Applied Science and Manufacturing, vol.67, p.31, 2014.

J. A. Hartigan and M. A. Wong, Algorithm AS 136: A K-Means Clustering Algorithm, Applied Statistics, vol.28, p.70, 1979.

D. P. Hasselman and L. F. Johnson, Effective Thermal Conductivity of Composites with Interfacial Thermal Barrier Resistance, Journal of Composite Materials, vol.21, issue.6, p.67, 1987.

B. Hay, J. Filtz, and J. Batsale, Mesure de la diffusivité thermique par la méthode flash, Techniques de l'Ingénieur, p.67, 2004.

E. Heardman, C. Lekakou, and M. G. Bader, In-plane permeability of sheared fabrics, Composites Part A: Applied Science and Manufacturing, vol.32, issue.7, p.130, 2001.

F. L. Heisey and K. D. Haller, Fitting Woven Fabric to Surfaces in Three Dimensions, Journal of the Textile Institute, vol.79, issue.2, p.37, 1988.

S. J. Hoff and K. A. Janni, Monte-Carlo technique for the determination of thermal radiation shape factors, Journal of the American Society of Agricultural Engineering, vol.32, p.20, 1989.

M. Holmes, High volume composites for the automotive challenge, Reinforced Plastics, vol.61, p.3, 2017.

M. Hou and K. Friedrich, Stamp forming of continuous carbon fibre/polypropylene composites, Composites Manufacturing, vol.2, p.11, 1991.

M. Hou, Stamp forming of fabric-reinforced thermoplastic composites, Polymer Composites, vol.17, p.11, 1996.

J. R. Howell and M. P. Mengüç, Radiative transfer configuration factor catalog: a listing of relations for common geometries, Journal of Quantitative Spectroscopy and Radiative Transfer, vol.112, issue.5, p.19, 2011.

S. Hwang and K. Hwang, Stamp forming of locally heated thermoplastic composites, Composites Part A: Applied Science and Manufacturing, vol.33, issue.5, pp.669-676, 2002.

L. Ibos, J. Monchau, V. Feuillet, J. Dumoulin, P. Ausset et al., Investigation of the directional emissivity of materials using infrared thermography coupled with a periodic excitation, Proceedings of the 2016 International Conference on Quantitative InfraRed Thermography. QIRT Council, p.106, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01388188

F. P. Incropera, D. P. Dewitt, T. L. Bergman, and A. S. Lavine, Fundamentals of heat and mass transfer, vol.100, p.99, 2006.

T. Ishikawa, K. Amaoka, Y. Masubuchi, T. Yamamoto, A. Yamanaka et al., Overview of automotive structural composites technology developments in Japan, Composites Science and Technology, vol.155, pp.221-246, 2018.

, ISO. ISO 1183-1: Plastics -Methods for determining the density of non-cellular plastics. International Organization for Standardization (ISO), p.65, 2012.

Y. Jannot, A. Felix, and . Degiovanni, A centered hot plate method for measurement of thermal properties of thin insulating materials, Measurement Science and Technology, vol.21, issue.3, p.67, 2010.

D. Jauffrès, J. A. Sherwood, C. D. Morris, and J. Chen, Discrete mesoscopic modeling for the simulation of woven-fabric reinforcement forming, International Journal of Material Forming, vol.3, issue.S2, pp.1205-1216, 2009.

K. Kadoya, N. Matsunaga, and A. Nagashima, Viscosity and Thermal Conductivity of Dry Air in the Gaseous Phase, Journal of Physical and Chemical Reference Data, vol.14, p.81, 1985.

G. Kalaprasad, P. Pradeep, G. Mathew, C. Pavithran, and S. Thomas, Thermal conductivity and thermal diffusivity analyses of low-density polyethylene composites reinforced with sisal, glass and intimately mixed sisal/glass fibres, Composites Science and Technology, vol.60, p.70, 2000.

M. Kashani, A. Rashidi, B. J. Crawford, and A. S. Milani, Analysis of a two-way tension-shear coupling in woven fabrics under combined loading tests: global to local transformation of non-orthogonal normalized forces and displacements, Composites Part A: Applied Science and Manufacturing, vol.88, p.33, 2016.

M. Kashani, A. Hosseini, F. Sassani, F. K. Ko, and A. S. Milani, Understanding different types of coupling in mechanical behavior of woven fabric reinforcements: a critical review and analysis, Composite Structures 179, p.33, 2017.

]. S. [kawabata+1973, M. Kawabata, H. Niwa, and . Kawai, The finite-deformation theory of plain weave fabrics--Part I: The biaxial deformation theory, The Journal of The Textile Institute, vol.64, pp.21-46, 1973.

S. Kawabata and R. S. Rengasamy, Thermal conductivity of unidirectional fibre composites made from yarns and computation of thermal conductivity of yarns, In: Indian Journal of Fibre & Textile Research, vol.27, p.70, 2002.

S. P. Keeler, Circular Grid System -A Valuable Aid for Evaluating Sheet Metal Formability, SAE Transactions, vol.77, p.137, 1968.

M. A. Khan, T. Mabrouki, E. Vidal-sallé, and P. Boisse, Numerical and experimental analyses of woven composite reinforcement forming using a hypoelastic behaviour. Application to the double dome benchmark, Journal of Materials Processing Technology, vol.210, issue.2, p.121, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00505131

M. Knights, The truth about heaters, Plastics Technology, vol.42, p.11, 1996.

A. R. Labanieh, C. Garnier, P. Ouagne, O. Dalverny, and D. Soulat, Intraply yarn sliding defect in hemisphere preforming of a woven preform, Composites Part A: Applied Science and Manufacturing, vol.107, pp.432-446, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02359807

G. N. Labeas, V. B. Watiti, and C. V. Katsiropoulos, Thermomechanical simulation of infrared heating diaphragm forming process for thermoplastic parts, Journal of Thermoplastic Composite Materials, vol.21, issue.4, p.22, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00570805

P. Land, R. Crossley, D. Branson, and S. Ratchev, Technology Review of Thermal Forming Techniques for use in Composite Component Manufacture, SAE International Journal of Materials and Manufacturing, vol.9, issue.1, pp.81-89, 2015.

P. Latil, L. Orgéas, C. Geindreau, P. J. Dumont, and S. Rolland-du-roscoat, Towards the 3D in situ characterisation of deformation micro-mechanisms within a compressed bundle of fibres, Composites Science and Technology, vol.71, p.35, 2011.

J. Launay, G. Hivet, A. V. Duong, and P. Boisse, Experimental analysis of the influence of tensions on in plane shear behaviour of woven composite reinforcements, Composites Science and Technology, vol.68, issue.2, p.31, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00938638

]. V. Le-louët+2017, B. Le-louët, S. Rousseau, N. Le-corre, X. Boyard et al., Directional spectral reflectivity measurements of a carbon fibre reinforced composite up to 450°C, International Journal of Heat and Mass Transfer, vol.112, pp.882-890, 2017.

G. Lebrun, M. N. Bureau, and J. Denault, Evaluation of bias-extension and picture-frame test methods for the measurement of intraply shear properties of PP/glass commingled fabrics, Composite Structures, vol.61, p.31, 2003.

G. Lebrun, M. N. Bureau, and J. Denault, Thermoforming-Stamping of Continuous Glass Fiber/Polypropylene Composites: Interlaminar and Tool-Laminate Shear Properties, Journal of Thermoplastic Composite Materials, vol.17, issue.2, p.143, 2004.

W. B. Lee, C. F. Cheung, and J. G. Li, Applications of virtual manufacturing in materials processing, Journal of Materials Processing Technology, vol.113, issue.1-3, pp.416-423, 2001.

W. Lee, M. Um, J. Byun, P. Boisse, and J. Cao, Numerical study on thermo-stamping of woven fabric composites based on double-dome stretch forming, International Journal of Material Forming, vol.3, issue.S2, p.156, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00935551

J. Lee, B. Kim, C. Lee, and D. Ko, A characterisation of tool-ply friction behaviors in thermoplastic composite, Procedia Engineering, vol.207, p.143, 2017.

H. Leuenberger and R. A. Person, Compilation of radiation shape factors for cylindrical assemblies, American Society of Mechanical Engineers, p.49, 1956.

H. Li, S. Li, and Y. Wang, Prediction of effective thermal conductivities of woven fabric composites using unit cells at multiple length scales, Journal of Materials Research, vol.26, issue.03, p.34, 2011.

B. Liang, N. Hamila, M. Peillon, and P. Boisse, Analysis of thermoplastic prepreg bending stiffness during manufacturing and of its influence on wrinkling simulations, Composites Part A: Applied Science and Manufacturing, vol.67, pp.111-122, 2014.

H. Lin, J. Wang, A. C. Long, M. J. Clifford, and P. Harrison, Predictive modelling for optimization of textile composite forming, Composites Science and Technology, vol.67, p.31, 2007.

H. Lin, L. P. Brown, and A. C. Long, Modelling and Simulating Textile Structures Using TexGen, Advanced Materials Research, vol.331, p.35, 2011.

G. Liraut and K. Bender, Practical application of thermoplastic composites for body-in-white application development: A collaborative approach between DuPont and Renault, p.3, 2015.

T. Log and S. E. Gustafsson, Transient plane source (TPS) technique for measuring thermal transport properties of building materials, Fire and Materials, vol.19, issue.1, p.68, 1995.

F. Loix, P. Badel, L. Orgéas, C. Geindreau, and P. Boisse, Woven fabric permeability: From textile deformation to fluid flow mesoscale simulations, Composites Science and Technology, vol.68, issue.7-8, p.34, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00343149

S. V. Lomov, A. V. Gusakov, G. Huysmans, A. Prodromou, and I. Verpoest, Textile geometry preprocessor for meso-mechanical models of woven composites, Composites Science and Technology, vol.60, issue.11, p.35, 2000.

A. C. Long, M. J. Clifford, P. Harrison, and C. D. Rudd, Modelling of draping and deformation for textile composites, ICMAC-international conference for manufacturing of advanced composites. Belfast: IOM Communications, p.28, 2001.

M. Machado, M. Fischlschweiger, and Z. Major, A rate-dependent nonorthogonal constitutive model for describing shear behaviour of woven reinforced thermoplastic composites, Composites Part A: Applied Science and Manufacturing, vol.80, p.137, 2016.

M. Machado, L. Murenu, M. Fischlschweiger, and Z. Major, Analysis of the thermomechanical shear behaviour of woven-reinforced thermoplastic-matrix composites during forming, Composites Part A: Applied Science and Manufacturing, vol.86, pp.39-48, 2016.

C. Mack and H. M. Taylor, The Fitting of Woven Cloth to Surfaces, Journal of the Textile Institute Transactions, vol.47, issue.9, p.36, 1956.

M. Mahlke, G. Menges, and W. Michaeli, New strategies to preheat glass mat reinforced thermoplastics (GMT), Proceedings of ANTEC1989. Ed. by Society of Plastics Engineers, p.13, 1989.

S. Mainguy, M. Olivier, M. A. Josse, and M. Guidon, Description and calibration of a fully automated infrared scatterometer, Optical Scatter: Applications, Measurement, and Theory, p.106, 1991.

E. Maire, J. Y. Buffière, L. Salvo, J. J. Blandin, W. Ludwig et al., On the Application of X-ray Microtomography in the Field of Materials Science, Advanced Engineering Materials, vol.3, p.35, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00475297

T. A. Martin, G. R. Christie, and D. Bhattacharyya, Grid strain analysis and its application in composite sheet forming, Composite Materials Series, p.137, 1997.

S. Mathieu, N. Hamila, F. Bouillon, and P. Boisse, Enhanced modeling of 3D composite preform deformations taking into account local fiber bending stiffness, Composites Science and Technology, vol.117, p.159, 2015.

D. Mathijsen, Thermoplastic composites keep gaining momentum in the automotive industry, Reinforced Plastics, vol.60, p.3, 2016.

T. Matsumoto, A. Cezairliyan, and D. Basak, Hemispherical total emissivity of Niobium, Molybdenum, and Tungsten at high temperatures using a combined transient and brief steady-state technique, International Journal of Thermophysics, vol.20, p.51, 1999.

G. M. Maxwell, M. J. Bailey, and V. W. Goldschmidt, Calculations of the radiation configuration factor using ray casting, Computer-Aided Design, vol.18, p.23, 1986.

]. S. [mazumder+2000, A. Mazumder, and . Kersch, A fast Monte Carlo scheme for thermal radiation in semiconductor applications, Numerical Heat Transfer, Part B: Fundamentals, vol.37, p.24, 2000.

G. B. Mcguinness and C. M. Brádaigh, Characterisation of thermoplastic composite melts in rhombus-shear: the picture-frame experiment, Composites Part A: Applied Science and Manufacturing, vol.29, issue.1-2, p.29, 1998.

B. C. Meyer, C. V. Katsiropoulos, and S. G. Pantelakis, Hot forming behavior of non-crimp fabric peek/c thermoplastic composites, Composite Structures, vol.90, p.44, 2009.

F. Meyer, Topographic distance and watershed lines, Signal Processing, vol.38, p.173, 1994.

R. A. Michaud and A. J. Giacomin, Sheet temperature in thermoforming, Journal of Plastic Film & Sheeting, vol.27, p.106, 2011.

A. S. Milani, J. A. Nemes, R. C. Abeyaratne, and G. A. Holzapfel, A method for the approximation of non-uniform fiber misalignment in textile composites using picture frame test, Composites Part A: Applied Science and Manufacturing, vol.38, p.29, 2007.

M. Minissale, C. Pardanaud, R. Bisson, and L. Gallais, The temperature dependence of optical properties of tungsten in the visible and near-infrared domains: an experimental and theoretical study, Journal of Physics D: Applied Physics, vol.50, p.51, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01690700

R. R. Mishra and A. K. Sharma, Microwave-material interaction phenomena: Heating mechanisms, challenges and opportunities in material processing, Composites Part A: Applied Science and Manufacturing, vol.81, p.11, 2016.

P. Mock, 2 emission standards for passenger cars and light-commercial vehicles in the European Union. Tech. rep. The International Council on Clean Transportation, 2019.

M. F. Modest, Radiative Heat Transfer, p.19, 2013.

P. F. Monaghan, M. T. Brogan, and P. H. Oosthuizen, Heat transfer in an autoclave for processing thermoplastic composites, Composites Manufacturing, vol.2, pp.233-242, 1991.

S. Monteix, Modélisation du chauffage convecto-radiatif de préformes en PET pour la réalisation de corps creux, 2001.

A. Muhlbauer, A. V. Starck, and C. Kramer, Handbook of Thermoprocessing Technologies: Fundamentals -Processes -Components -Safety, p.11, 2007.

A. M. Murtagh, J. J. Lennon, and P. J. Mallon, Surface friction effects related to pressforming of continuous fibre thermoplastic composites, Composites Manufacturing, vol.6, p.143, 1995.

W. Najjar, X. Legrand, P. Santo, D. Soulat, and S. Boude, Analysis of the Blank Holder Force Effect on the Preforming Process Using a Simple Discrete Approach, Key Engineering Materials, vol.554, issue.557, p.139, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01207085

S. Nakouzi, J. Pancrace, F. Schmidt, Y. L. Maoult, and F. Berthet, Simulations of an Infrared Composite Curing Process, Advanced Engineering Materials, vol.13, issue.7, p.24, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01716274

S. Nakouzi, F. Berthet, D. Delaunay, Y. L. Maoult, F. Schmidt et al., Optimization of the Incident IR Heat Flux upon a 3D Geometry Composite Part (Carbon/Epoxy), Key Engineering Materials, vol.504, pp.1085-1090, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01687330

S. Nakouzi, Modélisation du procédé de cuisson de composites infusés par chauffage infrarouge, vol.84, p.49, 2012.

N. Naouar, E. Vidal-sallé, J. Schneider, E. Maire, and P. Boisse, Meso-scale FE analyses of textile composite reinforcement deformation based on X-ray computed tomography, Composite Structures, vol.116, p.35, 2014.
URL : https://hal.archives-ouvertes.fr/hal-02173728

A. Nawrocki and M. Labrosse, A finite element model for simple straight wire rope strands, Computers & Structures, vol.77, issue.4, p.34, 2000.

G. Nilakantan, M. Keefe, T. A. Bogetti, R. Adkinson, and J. W. Gillespie, On the finite element analysis of woven fabric impact using multiscale modeling techniques, International Journal of Solids and Structures, vol.47, p.36, 2010.

F. Nosrat-nezami, T. Gereke, C. Eberdt, and C. Cherif, Characterisation of the shear-tension coupling of carbon-fibre fabric under controlled membrane tensions for precise simulative predictions of industrial preforming processes, Composites Part A: Applied Science and Manufacturing, vol.67, p.33, 2014.

A. R. Offringa, Thermoplastic composites-rapid processing applications, Composites Part A: Applied Science and Manufacturing, vol.27, p.159, 1996.

G. Orange, E. Bessard, J. Bréard, L. Bizet, J. L. Bailleul et al., Development of composite parts with RTM process based on new high fluidity thermoplastic polymers, Proceedings of the 12th conference on Flow Processes in Composite Materials, p.57, 2014.

N. Otsu, A Threshold Selection Method from Gray-Level Histograms, IEEE Transactions on Systems, Man, and Cybernetics, vol.9, issue.1, p.61, 1979.

P. Ouagne, D. Soulat, J. Moothoo, E. Capelle, and S. Gueret, Complex shape forming of a flax woven fabric, analysis of the tow buckling and misalignment defect, Composites Part A: Applied Science and Manufacturing, vol.51, p.144, 2013.

J. Patou, R. Bonnaire, E. D. Luycker, and G. Bernhart, Influence of consolidation process on voids and mechanical properties of powdered and commingled carbon/PPS laminates, Composites Part A: Applied Science and Manufacturing, vol.44, p.41, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01943849

J. Patou, Elaboration de pièces composites complexes par consolidation autoclave à partir de préformes textiles thermoplastiques renforcées fibres de carbone, IMT Mines Albi, p.137, 2018.

N. W. Pech-may, A. Mendioroz, and A. Salazar, Simultaneous measurement of the in-plane and in-depth thermal diffusivity of solids using pulsed infrared thermography with focused illumination, NDT & E International, vol.77, p.67, 2016.

J. Peeters, B. Ribbens, J. J. Dirckx, and G. Steenackers, Determining directional emissivity: Numerical estimation and experimental validation by using infrared thermography, Infrared Physics & Technology, vol.77, p.106, 2016.

X. Peng and J. Cao, A dual homogenization and finite element approach for material characterization of textile composites, Composites Part B: Engineering, vol.33, p.121, 2002.

X. Peng and J. Cao, Bias extension test standard, p.125, 2003.

X. Peng and J. Cao, A continuum mechanics-based non-orthogonal constitutive model for woven composite fabrics, Composites Part A: Applied Science and Manufacturing, vol.36, issue.6, p.116, 2005.

X. Peng and Z. U. Rehman, Textile composite double dome stamping simulation using a non-orthogonal constitutive model, Composites Science and Technology, vol.71, issue.8, p.116, 2011.

X. Peng, Z. Guo, T. Du, and W. Yu, A simple anisotropic hyperelastic constitutive model for textile fabrics with application to forming simulation, Composites Part B: Engineering, vol.52, p.118, 2013.

M. Pettersson and S. Stenström, Modelling of an electric IR heater at transient and steady state conditions, International Journal of Heat and Mass Transfer, vol.43, issue.7, p.22, 2000.

R. Pierce, B. Falzon, M. Thompson, and R. Boman, Implementation of a Non-Orthogonal Constitutive Model for the Finite Element Simulation of Textile Composite Draping, In: Applied Mechanics and Materials, vol.553, pp.76-81, 2014.

, Porcher Industries2017] Porcher Industries. Selector Guide -Composites, p.43, 2017.

A. G. Prodromou and J. Chen, On the relationship between shear angle and wrinkling of textile composite preforms, Composites Part A: Applied Science and Manufacturing, vol.28, issue.5, p.28, 1997.

V. Quaglini, C. Corazza, and C. Poggi, Experimental characterization of orthotropic technical textiles under uniaxial and biaxial loading, Composites Part A: Applied Science and Manufacturing, vol.39, p.118, 2008.

V. R. Rao and V. M. Sastri, Efficient evaluation of diffuse view factors for radiation, International Journal of Heat and Mass Transfer, vol.39, issue.6, p.23, 1996.

L. Rayleigh, On the influence of obstacles arranged in rectangular order upon the properties of a medium, The London, vol.34, p.67, 1892.

M. Redelbach, M. Klötzke, and H. E. Friedrich, Impact of lightweight design on energy consumption and cost effectiveness of alternative powertrain concepts, Proceedings of the European Electric Vehicle Conference (EEVC). 2012 (cit

T. Renault, Les matériaux composites dans l'automobile, Mécanique & Industries, vol.2, issue.3, p.3, 2001.

T. Renault, Developments in thermoplastic composites for automotive applications, Franco-British Symposium on Composite Materials. 2015 (cit. on pp, vol.40, p.4

P. M. Reynolds, Spectral emissivity of 99.7% aluminium between 200 and 540 C, British Journal of Applied Physics, vol.12, issue.3, p.100, 1961.

A. M. Rhoades, J. L. Williams, and R. Androsch, Crystallization kinetics of polyamide 66 at processing-relevant cooling conditions and high supercooling, Thermochimica Acta 603, p.148, 2015.

S. Ropers, M. Kardos, and T. A. Osswald, A thermo-viscoelastic approach for the characterization and modeling of the bending behavior of thermoplastic composites, Composites Part A: Applied Science and Manufacturing, vol.90, pp.22-32, 2016.

S. Ropers, U. Sachs, M. Kardos, and T. A. Osswald, A thermo-viscoelastic approach for the characterization and modeling of the bending behavior of thermoplastic composites -Part II, Composites Part A: Applied Science and Manufacturing, vol.96, p.32, 2017.

R. L. Rudkin, W. J. Parker, and R. J. Jenkins, Measurements of the Thermal Properties of Metals at Elevated Temperatures". In: Temperature; Its Measurement and Control in Science and Industry, p.51, 1962.

U. Sachs, R. Akkerman, and S. P. Haanappel, Bending Characterization of UD Composites, Key Engineering Materials, p.32, 2014.

J. Schindelin, I. Arganda-carreras, E. Frise, V. Kaynig, M. Longair et al., Fiji: an open-source platform for biological-image analysis, Nature Methods, vol.9, issue.7, p.126, 2012.
URL : https://hal.archives-ouvertes.fr/pasteur-02616466

F. Schmidt, Y. L. Maoult, and S. Monteix, Modelling of infrared heating of thermoplastic sheet used in thermoforming process, Journal of Materials Processing Technology, p.23, 2003.
URL : https://hal.archives-ouvertes.fr/hal-01709512

S. B. Sharma, M. P. Sutcliffe, and S. H. Chang, Characterisation of material properties for draping of dry woven composite material, Composites Part A: Applied Science and Manufacturing, vol.34, p.28, 2003.

M. Sherburn, Geometric and mechanical modelling of textiles, p.35, 2007.

J. A. Sherwood, K. A. Fetfatsidis, J. L. Gorczyca, and L. Berger, Fabric thermostamping in polymer matrix composites, Manufacturing Techniques for Polymer Matrix Composites, p.28, 2012.

B. Shi and J. Liang, Circular grid pattern based surface strain measurement system for sheet metal forming, Optics and Lasers in Engineering, vol.50, issue.9, pp.1186-1195, 2012.

R. Siegel and J. R. Howell, Thermal Radiation Heat Transfer. Third. Taylor & Francis, 1992 (cit, p.51

S. Silvestri and R. Pecnik, A fast GPU Monte Carlo radiative heat transfer implementation for coupling with direct numerical simulation, Journal of Computational Physics: X, vol.3, p.24, 2019.

J. Sjölander, P. Hallander, and M. Åkermo, Forming induced wrinkling of composite laminates: A numerical study on wrinkling mechanisms, Composites Part A: Applied Science and Manufacturing, vol.81, p.152, 2016.

J. Skelton, Fundamentals of Fabric Shear, Textile Research Journal, vol.46, p.28, 1976.

A. A. Skordos, C. M. Aceves, and M. P. Sutcliffe, A simplified rate dependent model of forming and wrinkling of pre-impregnated woven composites, Composites Part A: Applied Science and Manufacturing, vol.38, p.139, 2007.

T. K. Slange, L. Warnet, W. J. Grouve, and R. Akkerman, Influence of preconsolidation on consolidation quality after stamp forming of C/PEEK composites, AIP Conference Proceedings 1769, vol.160, p.40, 2016.

T. K. Slange, L. L. Warnet, W. J. Grouve, and R. Akkerman, Deconsolidation of C/PEEK blanks: on the role of prepreg, blank manufacturing method and conditioning, Composites Part A: Applied Science and Manufacturing, vol.113, p.40, 2018.

J. R. Smith and U. K. Vaidya, Processing Optimization of Deformed Plain Woven Thermoplastic Composites, Applied Composite Materials, vol.20, issue.6, p.136, 2013.

. Solvay, Evolite XA1481 technical data sheet, p.66

S. Spagnol, B. Lartigue, A. Trombe, and F. Despetis, Experimental Investigations on the Thermal Conductivity of Silica Aerogels by a Guarded Thin-Film-Heater Method, Journal of Heat Transfer, vol.131, p.83, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00389893

E. M. Sparrow and R. D. Cess, Radiation Heat Transfer, Augmented Edition, CRC PR INC, vol.382, p.19, 1978.

J. Starke, Carbon composites in automotive structural applications, Proceedings of EuCIA: Composites and Sustainability, p.3, 2016.

C. Steggall-murphy, P. Simacek, S. G. Advani, S. Yarlagadda, and S. Walsh, A model for thermoplastic melt impregnation of fiber bundles during consolidation of powder-impregnated continuous fiber composites, Composites Part A: Applied Science and Manufacturing, vol.41, issue.1, p.44, 2010.

C. M. Stokes-griffin and P. Compston, A combined optical-thermal model for near-infrared laser heating of thermoplastic composites in an automated tape placement process, Composites Part A: Applied Science and Manufacturing, vol.75, p.11, 2015.

H. Stolarski and T. Belytschko, Membrane Locking and Reduced Integration for Curved Elements, Journal of Applied Mechanics, vol.49, p.150, 1982.

H. Suemasu, K. Friedrich, and M. Hou, On deformation of woven fabricreinforced thermoplastic composites during stamp-forming, Composites Manufacturing, vol.5, issue.1, p.27, 1994.

K. Svanberg, A Class of Globally Convergent Optimization Methods Based on Conservative Convex Separable Approximations, SIAM Journal on Optimization, vol.12, issue.2, p.110, 2002.

N. Svensson, R. Shishoo, and M. Gilchrist, Manufacturing of Thermoplastic Composites from Commingled Yarns-A Review, Journal of Thermoplastic Composite Materials, vol.11, issue.1, p.40, 1998.

G. J. Sweeney, P. F. Monaghan, M. T. Brogan, and S. F. Cassidy, Reduction of infra-red heating cycle time in processing of thermoplastic composites using computer modelling, Composites Manufacturing, vol.6, pp.255-262, 1995.

D. G. Taggart and F. J. Schwan, Evaluation of woven fabric composites for automotive applications, Journal of Materials Shaping Technology, vol.5, issue.1, p.3, 1987.

]. S. [tanaka+2015, K. Tanaka, T. Yoshikawa, K. Okamoto, and . Hasegawa, A new raytracing scheme for 3D diffuse radiation transfer on highly parallel architectures, Publications of the Astronomical Society of Japan, vol.67, p.24, 2015.

R. Tavana, S. Najar, M. T. Abadi, and M. Sedighi, Meso/-macroscale finite element model for forming process of woven fabric reinforcements, Journal of Composite Materials, vol.47, p.36, 2012.

R. H. Ten-thije, R. Akkerman, and J. Huétink, Large deformation simulation of anisotropic material using an updated Lagrangian finite element method, Computer Methods in Applied Mechanics and Engineering, vol.196, p.31, 2007.

]. R. Thije+2008a, R. Ten-thije, and . Akkerman, Solutions to intra-ply shear locking in finite element analyses of fibre reinforced materials, Composites Part A: Applied Science and Manufacturing, vol.39, issue.7, p.150, 2008.

R. H. Ten-thije, R. Akkerman, L. Van-der-meer, and M. P. Ubbink, Tool-ply friction in thermoplastic composite forming, International Journal of Material Forming, vol.1, issue.S1, p.143, 2008.

]. R. Thije+2011, R. Ten-thije, M. Akkerman, L. Ubbink, and . Van-der-meer, A lubrication approach to friction in thermoplastic composites forming processes, Composites Part A: Applied Science and Manufacturing, vol.42, p.152, 2011.

C. Tephany, J. Gillibert, P. Ouagne, G. Hivet, S. Allaoui et al., Development of an experimental bench to reproduce the tow buckling defect appearing during the complex shape forming of structural flax based woven composite reinforcements, Composites Part A: Applied Science and Manufacturing, vol.81, p.144, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02135760

U. Thomann, M. Sauter, and P. Ermanni, A combined impregnation and heat transfer model for stamp forming of unconsolidated commingled yarn preforms, Composites Science and Technology, vol.64, p.41, 2004.

U. Thomann, Direct stamp forming of non-consolidated carbon/thermoplastic fibre commingled yarns, vol.68, p.41, 2003.

M. Thomas, N. Boyard, N. Lefèvre, Y. Jarny, and D. Delaunay, An experimental device for the simultaneous estimation of the thermal conductivity 3-D tensor and the specific heat of orthotropic composite materials, International Journal of Heat and Mass Transfer, vol.53, p.67, 2010.

S. Thomas, K. Joseph, S. K. Malhotra, K. Goda, and M. S. Sreekala, Polymer Composites -Macro-and microcomposites, p.70, 2012.

A. J. Thompson, B. E. Said, D. Ivanov, J. , P. Belnoue et al.,

. Hallett, High fidelity modelling of the compression behaviour of 2D woven fabrics, International Journal of Solids and Structures, vol.154, p.120, 2018.

A. J. Thompson, B. E. Said, J. , P. Belnoue, and S. R. Hallett, Modelling process induced deformations in 0/90 non-crimp fabrics at the meso-scale, Composites Science and Technology, vol.168, p.36, 2018.

J. L. Throne, Understanding Thermoforming. Hanser, vol.266, p.10, 2008.

D. Trudel-boucher, B. Fisa, J. Denault, and P. Gagnon, Experimental investigation of stamp forming of unconsolidated commingled E-glass/polypropylene fabrics, Composites Science and Technology, vol.66, p.11, 2006.

U. K. Vaidya and K. K. Chawla, Processing of fibre reinforced thermoplastic composites, International Materials Reviews, vol.53, issue.4, pp.185-218, 2008.

]. B. Van-west+1991, R. B. Van-west, S. G. Pipes, and . Advani, The consolidation of commingled thermoplastic fabrics, Polymer Composites, vol.12, issue.6, p.41, 1991.

K. Vanclooster, S. V. Lomov, and I. Verpoest, Simulation of Multilayered Composites Forming, International Journal of Material Forming, vol.3, issue.S1, p.143, 2010.

K. Vanclooster, Forming of multilayered fabric reinforced thermoplastic composites, 2010.

B. Verleye, R. Croce, M. Griebel, M. Klitz, S. V. Lomov et al., Permeability of textile reinforcements: Simulation, influence of shear and validation, Composites Science and Technology, vol.68, p.130, 2008.

I. Verpoest and S. Lomov, Virtual textile composites software : Integration with micro-mechanical, permeability and structural analysis, Composites Science and Technology, vol.65, p.35, 2005.

C. Vicard, O. De-almeida, A. Cantarel, and G. Bernhart, Experimental study of polymerization and crystallization kinetics of polyamide 6 obtained by anionic ring opening polymerization of -caprolactam, pp.88-97, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01630266

P. B. Vodak, A. W. Mix, and A. J. Giacomin, Sheet bowing in thermoforming, Polymer Engineering & Science, vol.51, p.106, 2011.

T. D. Vu, D. Durville, and P. Davies, Finite element simulation of the mechanical behavior of synthetic braided ropes and validation on a tensile test, International Journal of Solids and Structures, vol.58, p.34, 2015.

P. Vueghs and P. Beckers, Presentation of the hemisphere method, Advanced Computational Methods in Heat Transfer IX, p.19, 2006.

M. D. Wakeman, T. A. Cain, C. D. Rudd, R. Brooks, and A. C. Long, Compression moulding of glass and polypropylene composites for optimised macro-and micro-mechanical properties-1 commingled glass and polypropylene, Composites Science and Technology, vol.58, p.41, 1998.

M. D. Wakeman, L. Zingraff, P. Bourban, J. E. Månson, and P. Blanchard, Stamp forming of carbon fibre/PA12 composites -A comparison of a reactive impregnation process and a commingled yarn system, Composites Science and Technology, vol.66, issue.1, pp.19-35, 2006.

R. A. Waltz, J. L. Morales, J. Nocedal, and D. Orban, An interior algorithm for nonlinear optimization that combines line search and trust region steps, Mathematical Programming, vol.107, p.131, 2005.

J. Wang and R. S. Porter, On the viscosity-temperature behavior of polymer melts, Rheologica Acta, vol.34, p.13, 1995.

J. Wang, J. R. Page, and R. Paton, Experimental investigation of the draping properties of reinforcement fabrics, Composites Science and Technology, vol.58, issue.2, p.28, 1998.

P. Wang, N. Hamila, P. Pineau, and P. Boisse, Thermomechanical analysis of thermoplastic composite prepregs using bias-extension test, Journal of Thermoplastic Composite Materials, vol.27, issue.5, p.38, 2012.

P. Wang, N. Hamila, P. Boisse, P. Chaudet, and D. Lesueur, Thermomechanical behavior of stretch-broken carbon fiber and thermoplastic resin composites during manufacturing, Polymer Composites, vol.36, pp.694-703, 2014.

L. Wedhorn and R. Ebeling, Quilted Stratum Process for High-performance CFRP Production, Lightweight Design worldwide, vol.10, p.12, 2017.

F. Van-der-weeën, Algorithms for draping fabrics on doubly-curved surfaces, International Journal for Numerical Methods in Engineering, vol.31, issue.7, p.37, 1991.

A. Willems, S. V. Lomov, and D. ,

I. Vandepitte and . Verpoest, Double dome forming simulation of woven textile composites, Proceedings of the 7th international ESAFORM conference, p.139, 2006.

A. Willems, S. V. Lomov, I. Verpoest, and D. Vandepitte, Optical strain fields in shear and tensile testing of textile reinforcements, Composites Science and Technology, vol.68, p.26, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00550272

M. Williams and R. Minjares, A technical summary of Euro 6/VI vehicle emission standards. Tech. rep. The International Council on Clean Transportation, 2016.

A. Wilson, Vehicle weight is the key driver for automotive composites, Reinforced Plastics, vol.61, pp.100-102, 2017.

X. Xiao, A. Long, and X. Zeng, Through-thickness permeability modelling of woven fabric under out-of-plane deformation, Journal of Materials Science, vol.49, p.130, 2014.

Y. Yang, R. Boom, B. Irion, D. Van-heerden, P. Kuiper et al., Recycling of composite materials, Chemical Engineering and Processing: Process Intensification 51, pp.53-68, 2012.

B. Yang, T. Jin, F. Bi, and J. Li, A Geometry Information Based Fishnet Algorithm for Woven Fabric Draping in Liquid Composite Molding, Materials Science, vol.20, p.37, 2014.

L. Ye, K. Friedrich, J. Kästel, and Y. Mai, Consolidation of unidirectional CF/PEEK composites from commingled yarn prepreg, Composites Science and Technology, vol.54, p.41, 1995.

L. Ye, Z. Chen, M. Lu, and M. Hou, De-consolidation and re-consolidation in CF/PPS thermoplastic matrix composites, Composites Part A: Applied Science and Manufacturing, vol.36, issue.7, p.40, 2005.

X. Yu, B. Cartwright, D. Mcguckin, L. Ye, and Y. Mai, Intra-ply shear locking in finite element analyses of woven fabric forming processes, Composites Part A: Applied Science and Manufacturing, vol.37, issue.5, p.150, 2006.

X. Zeng, L. P. Brown, A. Endruweit, M. Matveev, and A. C. Long, Geometrical modelling of 3D woven reinforcements for polymer composites: Prediction of fabric permeability and composite mechanical properties, Composites Part A: Applied Science and Manufacturing, vol.56, p.34, 2014.

G. Zhou, X. Sun, and Y. Wang, Multi-chain digital element analysis in textile mechanics, Composites Science and Technology, vol.64, issue.2, p.34, 2004.

B. Zhu, T. X. Yu, and X. M. Tao, Large deformation and slippage mechanism of plain woven composite in bias extension, Composites Part A: Applied Science and Manufacturing, vol.38, pp.1821-1828, 2007.

T. Baumard, O. De-almeida, G. Menary, P. Martin, F. Schmidt et al., Coupled heatingforming simulation of the thermoforming of thermoplastic composites, Proceedings of the 3 rd International Conference on Thermoplastic Composites (ITHEC), 2016.
URL : https://hal.archives-ouvertes.fr/hal-01719631

T. Baumard, O. De-almeida, G. Menary, Y. L. Maoult, F. Schmidt et al., Determination of thermal contact conductance in vacuum-bagged thermoplastic prepreg stacks using infrared thermography, AIP -Proceedings of the 19 th International ESAFORM Conference on Material Forming 1769, vol.1, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01609112