A. K. Jalan and A. R. Mohanty, Model based fault diagnosis of a rotor-bearing system for misalignment and unbalance under steady-state condition, J. Sound Vib, 2009.

X. Liu, L. Bo, X. He, and M. Veidt, Application of correlation matching for automatic bearing fault diagnosis, J. Sound Vib, 2012.

K. A. Loparo, M. L. Adams, W. Lin, M. F. Abdel-magied, and N. Afshari, Fault detection and diagnosis of rotating machinery, IEEE Trans. Ind. Electron, vol.47, issue.5, pp.1005-1014, 2000.

B. J. Hamrock and W. J. Anderson, Mechanical Design and Systems Handbook, vol.24, pp.29-48, 1983.

P. Pennacchi, P. Borghesani, S. Chatterton, and R. Ricci, An experimental based assessment of the deviation of the bearing characteristic frequencies, 6 th International Conference Acoustic and Vibratory Surveillance Methods and Diagnostic Techniques, 2011.

O. V. Thorsen and M. Dalva, A survey of faults on induction motors in offshore oil industry, petrochemical industry, gas terminals, and oil refineries, IEEE Trans. Ind. Appl, vol.31, issue.5, pp.1186-1196, 1995.

L. Renforth, P. S. Hamer, D. Clark, S. Goodfellow, and R. Tower, Continuous, remote on-line partial discharge (OLPD) monitoring of HV EX/ATEX motors in the oil and gas industry, Petroleum and Chemical Industry Technical Conference (PCIC), 2013 Record of Conference Papers Industry Applications Society 60th Annual IEEE, pp.1-8, 2013.

C. Bianchini, F. Immovilli, M. Cocconcelli, R. Rubini, and A. Bellini, Fault detection of linear bearings in brushless AC linear motors by vibration analysis, IEEE Trans. Ind. Electron, vol.58, issue.5, pp.1684-1694, 2011.

. Skf, fournisseur de produits et de solutions sur les marchés des roulements, des systèmes de lubrification, de la mécatronique, de l'étanchéité et des services

A. M. Al-ghamd and D. Mba, A comparative experimental study on the use of acoustic emission and vibration analysis for bearing defect identification and estimation of defect size, Mech. Syst. Signal Process, vol.20, issue.7, pp.1537-1571, 2006.

S. Al-dossary, R. I. Hamzah, and D. Mba, Observations of changes in acoustic emission waveform for varying seeded defect sizes in a rolling element bearing, Appl. Acoust, vol.70, issue.1, pp.58-81, 2009.

B. S. Kim, D. S. Gu, J. G. Kim, Y. C. Kim, and B. K. Choi, Rolling element bearing fault detection using acoustic emission signal analyzed by envelope analysis with discrete wavelet transform, Engineering Asset Lifecycle Management, pp.596-602, 2010.

F. Hemmati, W. Orfali, and M. S. Gadala, Rolling element bearing condition monitoring using acoustic emission technique, ISMA Conference on Advanced Acoustics and Vibration Engineering, pp.699-714, 2012.

E. Y. Kim, A. C. Tan, J. Mathew, and B. Yang, Condition monitoring of low speed bearings: A comparative study of the ultrasound technique versus vibration measurements, Aust. J. Mech. Eng, vol.5, issue.2, pp.177-189, 2008.

J. Lineham, Ultrasonic probes for inspecting bearings, World Pumps, issue.503, pp.34-36, 2008.

V. Hegde and G. S. Maruthi, Experimental investigation on detection of air gap eccentricity in induction motors by current and vibration signature analysis using non-invasive sensors, Energy Procedia, vol.14, pp.1047-1052, 2012.

V. F. Pires, M. Kadivonga, J. F. Martins, and A. J. Pires, Motor square current signature analysis for induction motor rotor diagnosis, Measurement, vol.46, issue.2, pp.942-948, 2013.

R. R. Schoen, T. G. Habetler, F. Kamran, and R. G. Bartfield, Motor bearing damage detection using stator current monitoring, IEEE Trans. Ind. Appl, vol.31, issue.6, pp.1274-1279, 1995.

Z. Peng and N. Kessissoglou, An integrated approach to fault diagnosis of machinery using wear debris and vibration analysis, Wear, vol.255, issue.7-12, pp.1221-1232, 2003.

T. J. Harvey, R. J. Wood, and H. E. Powrie, Electrostatic wear monitoring of rolling element bearings, Wear, vol.263, issue.7-12, pp.1492-1501, 2007.

L. Wang, Y. Yan, Y. Hu, and X. Qian, Intelligent condition monitoring of rotating machinery through electrostatic sensing and signal analysis, Smart Instrumentation, Measurement and Applications (ICSIMA), pp.1-4, 2013.

R. B. Randall, Vibration-based condition monitoring: industrial, aerospace and automotive applications, 2011.

V. N. Patel, N. Tandon, and R. K. Pandey, Vibration studies of dynamically loaded deep groove ball bearings in presence of local defects on races, Procedia Eng, vol.64, pp.1582-1591, 2013.

F. Cong, J. Chen, G. Dong, and M. Pecht, Vibration model of rolling element bearings in a rotor-bearing system for fault diagnosis, J. Sound Vib, vol.332, issue.8, pp.2081-2097, 2013.

J. Mathew and R. J. Alfredson, The condition monitoring of rolling element bearings using vibration analysis, J. Vib. Acoust. Stress. Reliab. Des, vol.106, issue.3, pp.447-453, 1984.

A. Rai and S. H. Upadhyay, A review on signal processing techniques utilized in the fault diagnosis of rolling element bearings, Tribol. Int, vol.96, pp.289-306, 2016.

J. Antoni, Cyclic spectral analysis in practice, Mech. Syst. Signal Process, vol.21, issue.2, pp.597-630, 2007.
URL : https://hal.archives-ouvertes.fr/hal-01714425

P. D. Mcfadden and J. D. Smith, Model for the vibration produced by a single point defect in a rolling element bearing, J. Sound Vib, vol.96, issue.1, pp.69-82, 1984.

P. D. Mcfadden and J. D. Smith, Vibration monitoring of rolling element bearings by the highfrequency resonance technique-a review, Tribol. Int, vol.17, issue.1, pp.3-10, 1984.

R. B. Randall and J. Antoni, Rolling element bearing diagnostics-A tutorial, Mech. Syst. Signal Process, vol.25, issue.2, pp.485-520, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01018742

Y. Su and S. Lin, On initial fault detection of a tapered roller bearing: frequency domain analysis, J. Sound Vib, vol.155, issue.1, pp.75-84, 1992.

W. A. Smith and R. B. Randall, Rolling element bearing diagnostics using the Case Western Reserve University data: A benchmark study, Mech. Syst. Signal Process, vol.64, pp.100-131, 2015.

S. Kass, A. Raad, and J. Antoni, Self-running Fault Diagnosis Method for Rolling Element Bearing, vol.58, 2019.

D. Ho and R. B. Randall, Optimisation of bearing diagnostic techniques using simulated and actual bearing fault signals, Mech. Syst. Signal Process, vol.14, issue.5, pp.763-788, 2000.

P. D. Mcfadden and J. D. Smith, The vibration produced by multiple point defects in a rolling element bearing, J. Sound Vib, vol.98, issue.2, pp.263-273, 1985.

D. Ho and R. B. Randall, Manifestations of bearing fault vibrations in gearboxes, Sixth International Congress on Sound and Vibration, pp.2943-2950, 1999.

R. B. Randall, J. Antoni, and S. Chobsaard, The relationship between spectral correlation and envelope analysis in the diagnostics of bearing faults and other cyclostationary machine signals, Mech. Syst. Signal Process, 2001.
URL : https://hal.archives-ouvertes.fr/hal-01714469

J. Antoni and R. B. Randall, Differential diagnosis of gear and bearing faults, J. Vib. Acoust, vol.124, issue.2, pp.165-171, 2002.
URL : https://hal.archives-ouvertes.fr/hal-01714460

J. Antoni, Cyclic spectral analysis of rolling-element bearing signals: Facts and fictions, J. Sound Vib, vol.304, issue.3-5, pp.497-529, 2007.
URL : https://hal.archives-ouvertes.fr/hal-01714505

J. Antoni and R. B. Randall, A stochastic model for simulation and diagnostics of rolling element bearings with localized faults, J. Vib. Acoust, vol.125, issue.3, pp.282-289, 2003.
URL : https://hal.archives-ouvertes.fr/hal-01714459

C. Walford and D. Roberts, Condition Monitoring of Wind Turbines: Technology Overview, Seeded-Fault Testing, and Cost-Benefit Analysis, Electr. Power Res. Inst, 2006.

D. Abboud, Vibration-based condition monitoring of rotating machines in nonstationary regime, 2015.
URL : https://hal.archives-ouvertes.fr/tel-01370989

A. K. Jardine, D. Lin, and D. Banjevic, A review on machinery diagnostics and prognostics implementing condition-based maintenance, Mechanical Systems and Signal Processing, 2006.

N. Tondon and A. Choudhury, A review of vibration and acoustics measurement methods for the detection of defects in rolling element bearing, Tribol. Int, 1999.

V. Sharma and A. Parey, A Review of Gear Fault Diagnosis Using Various Condition Indicators, Procedia Engineering, 2016.

P. Ve?e?, M. Kreidl, and R. ?míd, Condition indicators for gearbox condition monitoring systems, Acta Polytech, vol.45, issue.6, 2005.

P. Gupta and M. K. Pradhan, Fault detection analysis in rolling element bearing: A review, Mater. Today Proc, vol.4, issue.2, pp.2085-2094, 2017.

Y. Choi and Y. Kim, Fault detection in a ball bearing system using minimum variance cepstrum, Meas. Sci. Technol, vol.18, issue.5, p.1433, 2007.

J. Antoni, The spectral kurtosis: a useful tool for characterising non-stationary signals, Mech. Syst. Signal Process, vol.20, issue.2, pp.282-307, 2006.
URL : https://hal.archives-ouvertes.fr/hal-01714434

J. Antoni and R. B. Randall, The spectral kurtosis: application to the vibratory surveillance and diagnostics of rotating machines, Mech. Syst. Signal Process, vol.20, issue.2, pp.308-331, 2006.
URL : https://hal.archives-ouvertes.fr/hal-01714436

Y. Wang, Z. He, and Y. Zi, A demodulation method based on improved local mean decomposition and its application in rub-impact fault diagnosis, Meas. Sci. Technol, 2009.

Q. Meng and L. Qu, Rotating machinery fault diagnosis using Wigner distribution, Mech. Syst. Signal Process, 1991.

J. Antoni, Fast computation of the kurtogram for the detection of transient faults, Mech. Syst. Signal Process, vol.21, issue.1, pp.108-124, 2007.
URL : https://hal.archives-ouvertes.fr/hal-01714427

C. Capdessus, M. Sidahmed, and J. L. Lacoume, Cyclostationary processes: application in gear faults early diagnosis, Mech. Syst. Signal Process, vol.14, issue.3, pp.371-385, 2000.
URL : https://hal.archives-ouvertes.fr/hal-02188613

L. Bouillaut and M. Sidahmed, Cyclostationary approach and bilinear approach: comparison, applications to early diagnosis for helicopter gearbox and classification method based on HOCS, Mech. Syst. Signal Process, vol.15, issue.5, pp.923-943, 2001.

A. C. Mccormick and A. K. Nandi, Cyclostationarity in rotating machine vibrations, Mech. Syst. Signal Process, 1998.

J. Antoni, Cyclostationarity by examples, Mech. Syst. Signal Process, vol.23, issue.4, pp.987-1036, 2009.

J. Urbanek, T. Barszcz, R. Zimroz, and J. Antoni, Application of averaged instantaneous power spectrum for diagnostics of machinery operating under non-stationary operational conditions, Measurement, vol.45, issue.7, pp.1782-1791, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00776305

J. Urbanek, T. Barszcz, and J. Antoni, Time-frequency approach to extraction of selected second-order cyclostationary vibration components for varying operational conditions, Measurement, vol.46, issue.4, pp.1454-1463, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00926067

S. Kass, A. Raad, and J. Antoni, Self-running bearing diagnosis based on scalar indicator using fast order frequency spectral coherence, Measurement, vol.138, pp.467-484, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02483683

J. Antoni, P. Borghesani, S. Kass, A. Raad, and K. Gryllias, Methodologies for designing new condition indicators, Proceedings of ISMA 2018-International Conference on Noise and Vibration Engineering and USD 2018-International Conference on Uncertainty in Structural Dynamics, pp.883-890, 2013.

J. Antoni, G. Xin, and N. Hamzaoui, Fast computation of the spectral correlation, Mech. Syst. Signal Process, vol.92, pp.248-277, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02008605

D. Abboud and J. Antoni, Order-frequency analysis of machine signals, Mech. Syst. Signal Process, vol.87, pp.229-258, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01714332

W. Gardner, Measurement of spectral correlation, IEEE Trans. Acoust, vol.34, issue.5, pp.1111-1123, 1986.

W. A. Gardner, The spectral correlation theory of cyclostationary time-series, Signal Processing, vol.11, issue.1, pp.13-36, 1986.

W. A. Gardner, Statistical spectral analysis: a nonprobabilistic theory, 1986.

G. D. ?ivanovi? and W. A. Gardner, Degrees of cyclostationarity and their application to signal detection and estimation, Signal Processing, vol.22, issue.3, pp.287-297, 1991.

J. Antoni, F. Bonnardot, A. Raad, and M. E. Badaoui, Cyclostationary modelling of rotating machine vibration signals, Mech. Syst. Signal Process, vol.18, issue.6, pp.1285-1314, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00552018

V. George, G. H. Gaonkar, J. V. Prasad, and D. P. Schrage, Adequacy of modeling turbulence and related effects on helicopter response, AIAA J, vol.30, issue.6, pp.1468-1479, 1992.

W. A. Gardner, Introduction to random processes, vol.71, 1990.

W. Gardner and L. Franks, Characterization of cyclostationary random signal processes, IEEE Trans. Inf. theory, vol.21, issue.1, pp.4-14, 1975.

D. Remond and J. Mahfoudh, From transmission error measurements to angular sampling in rotating machines with discrete geometry, Shock Vib, vol.12, issue.2, pp.149-161, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00373877

F. Bonnardot, Comparaison entre les analyses angulaire et temporelle des signaux vibratoires de machines tournantes, 2004.
URL : https://hal.archives-ouvertes.fr/tel-00103067

A. Ibrahim, Contribution au diagnostic de machines électromécaniques: Exploitation des signaux électriques et de la vitesse instantanée, 2009.

D. Abboud, J. Antoni, M. Eltabach, and S. Sieg-zieba, Angle? time cyclostationarity for the analysis of rolling element bearing vibrations, Measurement, vol.75, pp.29-39, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01714350

G. Elia, Z. Daher, and J. Antoni, A novel approach for the cyclo-non-stationary analysis of speed varying signals, Proceedings of ISMA, pp.22-27, 2010.

J. Urbanek, T. Barszcz, and A. Jablonski, Application of angular-temporal spectrum to exploratory analysis of generalized angular-temporal deterministic signals, Appl. Acoust, vol.109, pp.27-36, 2016.

A. Napolitano, Generalized almost-cyclostationary processes and spectrally correlated processes: Two extensions of the class of the almost-cyclostationary processes, 2007 9th International Symposium on Signal Processing and Its Applications, pp.1-6, 2007.

J. Antoni, D. Abboud, and S. Baudin, Time-angle periodically correlated processes, Cyclostationarity: Theory and Methods, pp.3-14, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01018904

R. Boustany and J. Antoni, Cyclic spectral analysis from the averaged cyclic periodogram, IFAC Proc, vol.38, issue.1, pp.166-171, 2005.

F. Bonnardot, M. E. Badaoui, R. B. Randall, J. Daniere, and F. Guillet, Use of the acceleration signal of a gearbox in order to perform angular resampling (with limited speed fluctuation), Mech. Syst. Signal Process, vol.19, issue.4, pp.766-785, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00551998

C. Mishra, A. K. Samantaray, and G. Chakraborty, Rolling element bearing defect diagnosis under variable speed operation through angle synchronous averaging of wavelet de-noised estimate, Mech. Syst. Signal Process, vol.72, pp.206-222, 2016.

J. Antoni and R. B. Randall, Unsupervised noise cancellation for vibration signals: part Ievaluation of adaptive algorithms, Mech. Syst. Signal Process, vol.18, issue.1, pp.89-101, 2004.
URL : https://hal.archives-ouvertes.fr/hal-01714456

M. D. Coats, N. Sawalhi, and R. B. Randall, Extraction of tach information from a vibration signal for improved synchronous averaging, Proceedings of ACOUSTICS, pp.1-8, 2009.

P. Borghesani, P. Pennacchi, R. B. Randall, and R. Ricci, Order tracking for discrete-random separation in variable speed conditions, Mech. Syst. Signal Process, vol.30, pp.1-22, 2012.

Z. Daher, E. Sekko, J. Antoni, C. Capdessus, and L. Allam, Estimation of the synchronous average under varying rotating speed condition for vibration monitoring, Proceedings of ISMA, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00667102

J. Antoni, N. Ducleaux, G. Nghiem, and S. Wang, Separation of combustion noise in IC engines under cyclo-non-stationary regime, Mech. Syst. Signal Process, vol.38, issue.1, pp.223-236, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00926064

D. Abboud, J. Antoni, S. Sieg-zieba, and M. Eltabach, Deterministic-random separation in nonstationary regime, J. Sound Vib, vol.362, pp.305-326, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01285390

S. Braun, The synchronous (time domain) average revisited, Mech. Syst. Signal Process, vol.25, issue.4, pp.1087-1102, 2011.

J. Antoni and D. Hanson, Detection of surface ships from interception of cyclostationary signature with the cyclic modulation coherence, IEEE J. Ocean. Eng, vol.37, issue.3, pp.478-493, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00776321

A. Dandawate and G. B. Giannakis, Statistical tests for presence of cyclostationarity, IEEE Trans. signal Process, vol.42, issue.9, pp.2355-2369, 1994.

A. Klausen, K. G. Robbersmyr, and H. R. Karimi, Autonomous Bearing Fault Diagnosis Method based on Envelope Spectrum, IFAC-PapersOnLine, vol.50, issue.1, pp.13378-13383, 2017.

S. Abbasion, A. Rafsanjani, A. Farshidianfar, and N. Irani, Rolling element bearings multi-fault classification based on the wavelet denoising and support vector machine, Mech. Syst. Signal Process, vol.21, issue.7, pp.2933-2945, 2007.

D. Yang, A. F. Stronach, P. Macconnell, and J. Penman, Third-order spectral techniques for the diagnosis of motor bearing condition using artificial neural networks, Mech. Syst. Signal Process, vol.16, issue.2-3, pp.391-411, 2002.

P. Prieur, G. , and D. Urso, Des indices de cyclostationnarité pour la surveillance des engrenages, 15° Colloque sur le traitement du signal et des images, FRA, 1995.

A. Raad, J. Antoni, and M. Sidahmed, Indicators of cyclostationarity: Theory and application to gear fault monitoring, Mech. Syst. Signal Process, vol.22, issue.3, pp.574-587, 2008.
URL : https://hal.archives-ouvertes.fr/hal-01714402

P. Pennacchi, P. Borghesani, R. Ricci, and S. Chatterton, An experimental based assessment of the deviation of the bearing characteristic frequencies, 6th International Conference Acoustic and Vibratory Surveillance Methods and Diagnostic Techniques, 2011.

R. B. Randall, J. Antoni, and K. Gryllias, Alternatives to kurtosis as an indicator of rolling element bearing faults, Proceedings of ISMA2016 International Conference on Noise and Vibration Engineering, pp.2503-2516, 2016.

J. Antoni and P. Borghesani, A statistical methodology for the design of condition indicators, Mech. Syst. Signal Process, vol.114, pp.290-327, 2019.

W. Aures, Ein berechnungsverfahren der rauhigkeit, Acta Acust. united with Acust, vol.58, issue.5, pp.268-281, 1985.

, IMS bearings dataset, 2014.

, The Case Western Reserve University Bearing Data Center Website

W. Gousseau, J. Antoni, and J. Griffaton, Analysis of the Rolling Element Bearing data set of the Center for Intelligent Maintenance Systems of the University of Cincinnati, The thirteenth Iternational Conference on Condition Monitoring and Machinery Failure Prevention Technologies, pp.1-13, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01715193

H. Qiu, J. Lee, J. Lin, and G. Yu, Wavelet filter-based weak signature detection method and its application on rolling element bearing prognostics, J. Sound Vib, vol.289, issue.4-5, pp.1066-1090, 2006.

W. Li, M. Qiu, Z. Zhu, F. Jiang, and G. Zhou, Fault diagnosis of rolling element bearings with a spectrum searching method, Meas. Sci. Technol, vol.28, issue.9, p.95008, 2017.

J. Igba, K. Alemzadeh, C. Durugbo, and E. T. Eiriksson, Analysing RMS and peak values of vibration signals for condition monitoring of wind turbine gearboxes, Renew. Energy, vol.91, pp.90-106, 2016.

R. Yan and R. X. Gao, Approximate entropy as a diagnostic tool for machine health monitoring, Mech. Syst. Signal Process, vol.21, issue.2, pp.824-839, 2007.

H. Hong and M. Liang, Fault severity assessment for rolling element bearings using the Lempel-Ziv complexity and continuous wavelet transform, J. Sound Vib, vol.320, issue.1-2, pp.452-468, 2009.

J. Antoni, The infogram: Entropic evidence of the signature of repetitive transients, Mech. Syst. Signal Process, vol.74, pp.73-94, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01714496

C. Pachaud, R. Salvetat, and C. Fray, Crest factor and kurtosis contributions to identify defects inducing periodical impulsive forces, Mech. Syst. Signal Process, vol.11, issue.6, pp.903-916, 1997.

M. Cocconcelli, G. Curcurú, and R. Rubini, Statistical evidence of central moment as fault indicators in ball bearing diagnostics, The International Conference Surveillance 9, 2017.

H. R. Martin, Statistical moment analysis as a means of surface damage detection, Proceedings of the 7th international modal analysis conference, vol.1, pp.1016-1021, 1989.

P. Daniel and R. Weber, Psychoacoustical roughness: Implementation of an optimized model, Acta Acust. united with Acust, vol.83, issue.1, pp.113-123, 1997.

P. N. Vassilakis, Auditory roughness as a means of musical expression, Sel. Reports Ethnomusicol, vol.12, p.122, 2005.

M. Leman, Visualization and calculation of the roughness of acoustical musical signals using the synchronization index model (SIM), Proceedings of the COST G-6 Conference on Digital Audio Effects (DAFX-00), pp.7-9, 2000.

R. Duisters, The modeling of auditory roughness for signals with temporally asymmetric envelopes, 2005.

E. Zwicker and H. Fastl, Psychoacoustics: Facts and Models, 1990.