D. Addessi and V. Ciampi, A regularized force-based beam element with a damage-plastic section constitutive law, International journal for numerical methods in Engineering, vol.70, pp.610-629, 2007.

A. A. Al-aghbari, S. H. Hamzah, N. H. Hamid, and N. A. Rahman, Structural performance of two types of wall slab connection under out-of-plane lateral cyclic loading, Journal of Engineering Science and Technology, vol.7, issue.2, pp.177-194, 2012.

S. Alath and S. K. Kunnath, Modeling Inelastic Shear Deformation in RC Beam-Column Joints, 10th Engineering Mechanics Conference, 1995.

A. Altoontash, Simulation and damage models for performance ssessment of reinforced concrete beam-column joints. s.l, 2004.

D. L. Amorim, S. P. Proença, and J. Florez-lopez, A model of fracture in reinforced concrete arches based on lumped damage mechanics, International Journal of Solids and Structures, vol.50, pp.4070-4079, 2013.

. Anon, Bulletin d'information No. 195-196: Comité Euro-International du Béton, 1990.

A. A. Ansari, M. A. Bhutto, N. Bhatti, and R. A. Memon, Strength of wall-slab junction with new form of shear reinforcement in a laterally loaded tall shear wall building, Journal of Civil Engineering and Architecture, vol.9, pp.193-206, 2015.

, Bulletin n°220. Behaviour and analysis of reinforced concrete structures uneder alternate actions inducing inelastic response, 1994.

S. Chandrasekaran, L. Nunziante, G. Serino, and F. Carannante, Curvature ductility of RC sections based on Eurocode: Analytical procedure, KSCE Journal of Civil Engineering, vol.15, pp.131-144, 2011.

N. Chan, Etude numérique du comportement d'une jonction voile-plancher, Mémoire de projet de fin d, 2017.

T. Chaudat, Rapport des essais sismiques réalisés sur une maquette de plancher EDF type P4 a l'échelle réduite, s.l, 2002.

T. Chaudat, Cahier des spécifications techniques pour l'étude de dimensionnement de maquettes de jonction (voile/plancher) en béton armé, 2016.

T. Chaudat, Comportement sismique des jonctions voile/plancher -Rapport des essais Flexion Dynamique, 2020.

T. Chaudat, Comportement sismique des jonctions voile/plancher -Rapport des essais Flexion Statique, 2020.

S. Chen, Reinforced concrete floor slabs under in-plane monotonic and cyclic loading, 1986.

X. Chen, D. Zhou, P. Wang, and S. Zhang, New procedure for determining the momentcurvature relationsship of a reinforced concrete section, vol.67, pp.121-132, 2015.

, Bibliographie 210

S. C. Chun and T. Ha, Cyclic Behavior of Wall-Slab Joints with Lap Splices of Cold-Straightened Rebars and Mechanical Splices, Journal of Structural Engineering, vol.141, issue.2, pp.4014101-4014102, 2014.

. Code_aster, General public licensed structural mechanics finite element software, 2001.

C. Combescure, H. Dumontet, and F. Voldoire, Homogenised constitutive model coupling damage and debonding for reinforced concrete structures under cyclic solicitations, International Journal of Solids and Structures, vol.50, issue.24, pp.3861-3874, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01654802

C. Combescure, H. Dumontet, and F. Voldoire, Dissipative Homogenised Reinforced Concrete (DHRC) constitutive model dedicated to reinforced concrete plates under seismic loading, International Journal of Solids and Structures, pp.78-98, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01654799

R. Costa, P. Providencia, and A. Dias, Component-based reinforced concrete beam-column joint model, Structural Concrete, vol.18, pp.164-176, 2017.

I. S. Drakatos, K. Beyer, and A. Muttoni, Analytical model for slab-column connections subjected to cyclically increasing drifts, 16th World Conference on Earthquake, 2017.

I. S. Drakatos, A. Muttoni, and K. Beyer, Internal slab-column connections under monotonic and cyclic imposed rotations. Engineering structures, vol.123, pp.501-516, 2016.

, ENGSDS100269UKEPR -Methodology for seismic analysis of NI buildings -revision B, s.l.: s.n, EDF, 2012.

M. Elmorsi, M. R. Kianoush, and W. K. Tso, Modeling bond-slip deformations in reinforced concrete beam-column joints, Canadian Journal of Civil Engineering, vol.27, issue.3, pp.490-505, 2000.

B. Espion and P. Halleux, Moment curvature relationship of reinforced concrete sections under combined bending and normal force, Materials and structures, vol.21, pp.341-351, 1988.

J. Fléjou, Comportement dynamique des structures de génie civil avec liaisons semirigides, s.l.: ENS de Cachan, LMT, 1993.

F. Fleury, O. Merabet, and J. Reynouard, A new wemi-local approach for the finite element modeling of interior R/C beam-column joints. s.l, 11th World Conference on Earthquake Engineering, 1996.

F. Fleury, J. Reynouard, and O. Merabet, Multicomponent model of reinforced concrete joints for cyclic loading, Journal of Engineering Mechanics, issue.8, p.126, 2000.

J. Florez-lopez, Frame analysis and continuum damage mechanics, European journal of mechanics and solids, vol.17, issue.2, pp.269-283, 1998.

R. Folic, D. Zenunovic, and N. Residbegovic, Strength of connections in precast concrete structures, Facta universitatis -Series : Architecture and Civil Engineering, vol.9, pp.241-259, 2011.

M. Fontan, Benchmark SMART2013: from experiment to the numerical modeling, 2014.

S. Greeshma, Behaviour of exterior shear wall-diaphragm connection under cyclic loading, Thesis: Faculty of civil engineering, 2010.

S. Greeshma, L. Annilet-sheeja, and K. P. Jaya, Effect of confinement of flanged wall-slab joint under lateral cyclic load, Asian journal of civil engineering, vol.14, issue.4, pp.617-630, 2013.

, Bibliographie 211

S. Greeshma and K. P. Jaya, Effect of geometric parameters on exterior wall-floor connection, 15th World Conference on Earthquake Engineering, pp.24-28, 2012.

S. Greeshma, C. Rajesh, and K. P. Jaya, Seismic Behaviour of shear wall -slab joint under lateral cyclic loading, Asian journal of civil engineering (building and housin), vol.13, issue.4, pp.455-464, 2012.

B. Halphen and Q. Nguyen, Sur les matériaux standards généralisés, J. de Mécanique, vol.14, pp.39-63, 1975.

F. Hasnaoui, Modélisation simplifiées pour l'analyse du risque sismique de bâtiments en béton armé. s.l, 2014.

K. M. Hossain, Non-linear performance of slabs in coupled shear wall structures, Advances in Structural Engineering, vol.6, issue.4, pp.339-352, 2003.

S. Kaushik and K. Dasgupta, Seismic damage in shear wall-slab junction in RC buildings, Procedia Engineering, vol.144, pp.1332-1339, 2016.

J. Kim and J. M. Lafave, Joint shear behavior of reinforced concrete beam-column connections subjected to seismic lateral loading, 2009.

J. Kim, J. M. Lafave, and J. Song, A new statisticl approach for joint shear strength determination of RC beam-column connections subjected to lateral earthquake loading, Structural Engineering and Mechanics, vol.27, issue.4, pp.439-456, 2007.

P. Koechlin and S. Potapov, Global constitutive model for reinforced concrete plates, Journal of engineering mechanics, vol.133, issue.3, pp.257-266, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00086333

A. Kudzys, Evaluation of wall-slab connection behaviour under extreme lateral actions, Statyba -Civil Engineering, vol.4, issue.8, pp.35-44, 1996.

A. Kudzys, Main strut mechanism model in the analysis of reinforced concrete slab-wall joints, Engenharia Civil, vol.7, pp.81-86, 2000.

A. Kudzys, O. Joh, Y. Goto, and A. Kitano, Behavior of R/C Interior and Exterior Wal-slab Connections under Lateral Out-plane Loading, JCI Journal, vol.17, issue.2, pp.1131-1136, 1995.

H. Kwak and S. Kim, Nonlinear analysis of RC beams based on moment-curvature relation, Computers and Structures, vol.80, pp.615-628, 2002.

H. Kwak and S. Kim, Simplified monotonic moment-curvature relation considering fixed-end rotation and axial force effect. Engineering structures, vol.32, pp.69-79, 2010.

J. Y. Lam, P. L. Ng, and A. K. Kwan, Tension stiffening in concrete beams. Part 2: member analysis. Structures and buildings, vol.163, pp.29-39, 2010.

J. Lemaitre, J. Chaboche, A. Benallal, and R. Desmorat, Mécanique des matériaux solides, 2009.

S. Lermitte, T. Chaudat, and A. Courtois, , 2009.

L. N. Lowes and A. Altoontash, Modeling reinforced-concrete beam-column joints subjected to cyclic loading, Journal of Structural Engineering, vol.129, issue.12, pp.1686-1697, 2003.

S. R. Magne, In situ distributed monitoring of a small-scale reinforced concrete (RC) structure using combined FBG/OFDR fiber optics sensing for assessment of its seismic degradation mechanisms, 2019.

M. E. Marante and J. Florez-lopez, Three-dimensional analysis of reinforced concrete frames based on lumped damage mechanics, International Journal of Solids and Structures, vol.40, pp.5109-5123, 2003.

D. Markovic, P. Koechlin, and F. Voldoire, Reinforced concrete structures under extreme loading: Stress resultant Global Reinforced Concrete Models, pp.13-16, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00179527

J. Mazars, Apllication de la mécanique de l'endommagement Application de la mécanique de l, 1984.

J. Mazars and S. Grange, Modeling of reinforced concrete structural members for engineering purposes, Computers and concrete, vol.16, issue.5, pp.683-701, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01753967

J. Mazars, F. Hamon, and S. Grange, A new 3D model for concrete under monotonic, cyclic and dynamic loading, Materials and Structures, 2014.

R. A. Medina and H. Krawinkler, Influence of hysteretic behavior on the non-linear response of frame structures, Canada, 13th World Conference on Earthquake Engineering, 2004.

M. Memon, Strength and stiffness of shear wall -floor slab connections, 1984.

M. Memon and T. D. Narwani, Experimental study of in-plane shear walls connected by beams subjected to lateral, vol.10, pp.28-38, 2011.

M. Nakashima, T. Huang, and L. Lu, Seismic resistance characteristics of reinforced concrete beam-supported floor slabs in building structures, 1981.

, Dimensionnement de maquettes de jonction voile, 2017.

, Jonction voile / plancher : PN 16034-1 à 5. s.l.:s.n, 2017.

S. Pantazopoulou and I. Imran, Slab-Wall connections Under Lateral Forces, ACI STructural Journal, vol.89, issue.5, pp.515-527, 1992.

M. E. Perdomo, A. Ramirez, and J. Florez-lopez, Simulation of damage in RC frames with variable axial forces. Earthquake engineering and structural dynamics, vol.28, pp.311-328, 1999.

W. H. Press, S. A. Teukolsky, W. T. Vetterling, and B. P. Flannery, Numerical recipes in FORTRAN : the art of scientific computing, 1992.

M. Shin and J. La-fave, Testing and modeling for cyclic joint shear deformations in RC beamcolumn connections, Canada, 13th World Conference on Earthquake Engineering, 2004.

M. Shin and J. M. Lafave, Testing and modeling for cyclic joint shear deformations in RC beam-column connections, Canada, 13th World Conference on Earthquake Engineering, 2004.

P. D. Simao, H. Barros, C. C. Ferreira, and T. Marques, Closed-form moment-curvature relations for reinforced concrete cross sections under bending moment and axial force. Engineering structures, vol.129, pp.67-80, 2016.

, Bibliographie 213

R. S. Surumi, K. P. Jaya, and S. Greeshma, Numerical evaluation of structural wall-flat slab connection, vol.67, pp.663-672, 2015.

S. Tajiri, H. Shiohara, and F. Kusuhara, A new macro element of reinforced concrete beamcolumn joint for elasto-plastic plane frame analysis, 8th US Conference on Earthquake Engineering, 2006.

F. J. Vecchio and M. P. Collins, The modified compression field theory for reinforced concrete elements, ACI Structural Journal, vol.83, issue.2, pp.219-231, 1986.

J. F. Vecchio and M. P. Collins, Predicting the response of reinforced concrete beams subjected to shear, ACI Structural Journal, vol.85, issue.3, pp.258-268, 1988.

H. Vold, J. Crowley, and G. T. Rocklin, New Ways of Estimating Frequency Response Functions. Sound and vibration, vol.18, pp.34-38, 1984.

F. Wang, Comportement sismique des jonctions voile-plancher -Bibliographie, s, 2016.

M. Youssef and A. Ghobarah, Modelling of RC beam-column joints and structural walls, Journal of Earthquake Engineering, vol.5, issue.1, pp.93-111, 2001.

I. A. Zentner, Generation of spectrum compatible ground motion and its use in regulatory and performance-based seismic analysis, 2014.

D. Zenunovic and R. Folic, Models for behaviour analysis of monolithic wall and precast or monolithic floor slab connections. Engineering structures, vol.40, pp.466-478, 2012.

, Le modèle B est composé d'éléments tridimensionnels au niveau de la jonction et dans les zones proches de la jonction du voile et du plancher. Au-delà, des éléments de structure sont utilisés pour alléger le modèle. Le raccord éléments de structure / éléments volumiques est effectué par le biais de l'opérateur LIAISON_MAIL avec un raccord de type 'MASSIF_COQUE' de

, Les éléments volumiques sont quadratiques, les éléments plaques (DKT) et poutres (POU_D_E) linéaires

. Le-modèle-est-présenté-ci-dessous,

C. Annexe,