, Ainsi : ? Les adhésifs 8364 sont sensibles au post-curing, le 1107 plus que le 1008. Leur comportement après cuisson évolue principalement dans le domaine de transition vitreuse avec le module et le facteur de perte respectivement 290 % fois et 25 % plus important. L'erreur commise en utilisant les courbes maîtresses est donc très importante, Ces résultats infirment les plages compatibles identifiées avec les critères d'applicabilité

. ?-l', adhésif 9105 ne présente pas une sensibilité à la cuisson très importante, tout du moins en première approche. Les courbes maîtresses ne témoignent pas d'une superposition effective des isothermes quelle que soit la plage. Elles confirment les premières constatations faites avec les critères graphiques de Cole-Cole et de Wicket

, Cette étude constitue la première contribution de la thèse : le principe d'équivalence tempstempérature ne tient pas pour les adhésifs structuraux étudiés

, La dernière version développée avant les travaux de thèse est étudiée afin d'identifier les limites de la plage fréquentielle de caractérisation. Un outil objectif d'estimation des performances est utilisé dans ce but : le domaine de caractérisation. Il s'agit d'une représentation graphique de la raideur de l'échantillon en fonction de la fréquence utilisée par les constructeurs pour aider au dimensionnement. Sa construction nécessite d'identifier l'ensemble des limites physiques restreignant la caractérisation. Ces informations s'avèrent utiles pour le développement du nouveau banc d'analyse mécanique dynamique haute fréquence, Le chapitre 3 présente le banc d'analyse mécanique dynamique haute fréquence développé au sein de Supméca depuis plusieurs années, 2018.

, Elles sont fonction de la raideur échantillon considérée puisque ces derniers jouent un rôle important dans la dynamique du banc : ils maintiennent la chaîne d'actionnement. En conséquence, la performance est dictée par la nature des échantillons et leur dimensionnement, La conception est présentée dans les grandes lignes afin d'illustrer les diverses problématiques rencontrées et de justifier les choix technologiques. Les performances du banc développé sont estimées et comparées à celles du banc, 2011.

, Le chapitre débute par l'étalonnage des capteurs, une étape nécessaire du fait de leur nature expérimentale. L'étalonnage des vis instrumentées indique qu'elles ne peuvent être utilisées pour la mesure dynamique. De même, les développements associés à l'utilisation d'une pastille céramique nue pour la mesure de force n'ont pas abouti dans la durée de la thèse

, La campagne de caractérisation a été réalisée en contournant l'absence de capteurs de force et sans modifier la conception du banc. Cette approche est rendue possible par la profusion des mesures de déplacements. La comparaison des propriétés de l'adhésif 8364/1107 mesurées par les quatre dispositifs (Metravib, 2011.

, Le gain par rapport au banc précédant est fonction de la raideur échantillons : la fréquence maximale de caractérisation est deux fois plus importante à 100 N.µm ?1 . Il est maximisé lorsque sa raideur approche celle Bibliographie Agence spatiale européenne, Les résultats obtenus sur le banc 2018 confirment les performances estimées, 2010.

R. Al-safy, R. Al-mahaidi, and G. P. Simon, A study of the practicality and performance of CFRP applications using post-curing at moderately elevated temperatures, Composites Part B : Engineering, vol.48, pp.140-157, 2013.

G. Allaire and M. Benaïm, Conception optimale de structures, p.84, 2012.

G. Asch, L. Blum, P. André, J. Beaufront, and G. Charnay, Les capteurs en instrumentation industrielle -6ème édition, p.94, 2006.

E. Balmes and A. Bobillot, Analysis and design tools for structures damped by viscoelastic materials, International Modal Analysis Conference, p.73, 2002.

R. D. Blevins, Formulas for Natural Frequency and Mode Shape, vol.46, p.78, 1979.

H. C. Booij and G. P. Thoone, Generalization of Kramers-Kronig transforms and some approximations of relations between viscoelastic quantities, Rheologica Acta, vol.21, issue.1, pp.15-24, 1982.

P. Butaud, Contribution à l'utilisation des polymères à mémoire de forme pour les structures à amortissement contrôlé, vol.34, p.112, 2016.

P. Butaud, V. Placet, J. Klesa, M. Ouisse, E. Foltête et al., Investigations on the frequency and temperature effects on mechanical properties of a shape memory polymer (Veriflex), Mechanics of Materials, vol.87, p.26, 2015.
URL : https://hal.archives-ouvertes.fr/hal-02131272

R. Caracciolo, A. Gasparetto, and M. Giovagnoni, Application of causality check and of the reduced variables method for experimental determination of Young's modulus of a viscoelastic material, Mechanics of Materials, vol.33, issue.12, pp.693-703, 2001.

W. H. Carothers, Studies on polymerization and ring formation. I. An introduction to the general theory of condensation polymers, Journal of the American Chemical Society, vol.51, issue.8, pp.2548-2559, 1929.

E. Chailleux, G. Ramond, C. Such, and C. De-la-roche, A mathematical-based master-curve construction method applied to complex modulus of bituminous materials, Road Materials and Pavement Design, vol.7, issue.sup1, pp.75-92, 2006.

A. Chassaigne, F. Renaud, and J. Dion, Conception d'un viscoanalyseur pour la caractérisation haute fréquence de matériaux viscoélastiques, Congrès Français de Mécanique, p.119, 2017.

A. Chassaigne, F. Renaud, and J. Dion, Design of a viscoanalyser for high frequency characterization of viscoelastic materials, International Modal Analysis Conference, p.119, 2017.

A. Chevalier, Guide du dessinateur industriel. Hachette Education, vol.87, 2004.

W. C. Child and J. D. Ferry, Dynamic mechanical properties of poly-n-butyl methacrylate, Journal of Colloid Science, vol.12, issue.3, p.59, 1957.

H. Chuang and C. D. Han, Rheological behavior of polymer blends, Journal of Applied Polymer Science, vol.29, issue.6, pp.2205-2229, 1984.

K. S. Cole and R. H. Cole, Dispersion and Absorption in Dielectrics I. Alternating Current Characteristics, The Journal of Chemical Physics, vol.9, issue.4, pp.341-351, 1941.

P. Combette and I. Ernoult, Physique des polymeres. Tome 1, Structure, fabrication et emploi. Hermann, vol.8, p.9, 2005.

. Ctec, Piezo Tutorial, 2012.

D. Han, C. Kim, and J. K. , On the use of time-temperature superposition in multicomponent/multiphase polymer systems, Polymer, vol.34, issue.12, p.35, 1993.

E. Demeocq, Vis munie de jauges d'extensometrie pour mesurer la contrainte de traction et/ou de cisaillement subie(s) par la vis, Brevet WO2017006068A1, vol.82, p.83, 2015.

S. Dols, Développement d'une nouvelle méthode de serrage intelligente pour le contrôle des assemblages boulonnés, p.82, 2016.

A. K. Doolittle, Studies in newtonian flow. II. the dependence of the viscosity of liquids on free-space, Journal of Applied Physics, vol.22, issue.12, p.37, 1951.

J. Dupuy, Identification des propriétés mécaniques de matériaux composites par analyse vibratoire, vol.39, p.42, 2008.

S. Durant, Mesures d'accélération. Techniques de l'ingénieur, p.66, 2008.

I. Emri, Rheology of Solid Polymers, Rheology Reviews, vol.37, pp.49-100, 2005.

J. D. Ferry, Viscoelastic properties of polymers, vol.17, p.38, 1980.

J. D. Ferry, L. D. Grandine, and E. R. Fitzgerald, The Relaxation Distribution Function of Polyisobutylene in the Transition from Rubber-Like to Glass-Like Behavior, Journal of Applied Physics, vol.24, issue.7, pp.911-916, 1953.

M. Gergesova, I. Saprunov, and I. Emri, Closed-form solution for horizontal and vertical shiftings of viscoelastic material functions in frequency domain, Rheologica Acta, vol.55, issue.5, pp.351-364, 2016.

M. Gergesova, B. Zupancic, I. Saprunov, and I. Emri, The closed form t-T-P shifting (CFS) algorithm, Journal of Rheology, vol.55, pp.1-38, 2011.

D. Granger and A. Ross, Effects of partial constrained viscoelastic layer damping parameters on the initial transient response of impacted cantilever beams : Experimental and numerical results, Journal of Sound and Vibration, vol.321, issue.1-2, pp.45-64, 2009.

R. M. Guedes, A viscoelastic model for a biomedical ultra-high molecular weight polyethylene using the time-temperature superposition principle, Polymer Testing, vol.30, issue.3, pp.294-302, 2011.

P. Guillaume, P. Verboven, and S. Vanlanduit, Frequency-Domain Maximum Likelihood Identification of Modal Parameters with Confidence Intervals, International Conference on Noise and Vibration Engineering, vol.26, pp.359-366, 1998.

F. M. Guillot and D. Trivett, Complete elastic characterization of viscoelastic materials by dynamic measurements of the complex bulk and Young's moduli as a function of temperature and hydrostatic pressure, Journal of Sound and Vibration, vol.330, issue.14, pp.3334-3351, 2011.

C. D. Han, Influence of molecular weight distribution on the linear viscoelastic properties of polymer blends, Journal of Applied Polymer Science, vol.35, issue.1, pp.167-213, 1988.

E. R. Harrell and N. Nakajima, Modified Cole-Cole plot based on viscoelastic properties for characterizing molecular architecture of elastomers, Journal of Applied Polymer Science, vol.29, issue.3, pp.995-1010, 1984.

N. A. Hazeg, Contribution a l'etude des phenomenes de relaxation et de vieillissement dans les polymeres amorphes, p.12, 2006.
URL : https://hal.archives-ouvertes.fr/tel-01752545

J. Honerkamp and J. Weese, A note on estimating mastercurves, Rheologica Acta, vol.32, issue.1, pp.57-64, 1993.

, Plastiques -Détermination des propriétés mécaniques dynamiques. Partie 3 : Vibration en flexion -Méthode en résonance, p.27, 1996.

, Plastiques -Détermination des propriétés mécaniques dynamiques. Partie 6 : Vibration en cisaillement -Méthode hors résonance, vol.22, p.69, 1996.

, Vocabulaire international de métrologie -Concepts fondamentaux et généraux et termes associés ( VIM ), Joint Committee for Guides in Metrology, vol.94, p.98, 2008.

D. Jones, On temperature-frequency analysis of polymer dynamic mechanical behaviour, Journal of Sound and Vibration, vol.140, issue.1, pp.85-102, 1990.

D. I. Jones, Temperature-frequency dependence of dynamic properties of damping materials, Journal of Sound and Vibration, vol.33, issue.4, pp.451-470, 1974.

H. Jrad, J. L. Dion, F. Renaud, I. Tawfiq, and M. Haddar, Experimental characterization, modeling and parametric identification of the non linear dynamic behavior of viscoelastic components, European Journal of Mechanics -A/Solids, vol.42, pp.176-187, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01369208

G. Kergourlay, Mesure et prediction vibroacoustique de structures viscoelastiques, p.26, 2004.
URL : https://hal.archives-ouvertes.fr/tel-00011493

P. Krawczak, Essais mécaniques des plastiques -Essais rhéologiques et thermiques. Techniques de l'ingénieur, p.24, 2000.

R. S. Lake, Viscoelastic Solids, p.27, 1998.

R. S. Lakes, Viscoelastic measurement techniques, Review of Scientific Instruments, vol.75, issue.4, 2004.

L. Saux and V. , Fatigue et vieillissement des élastomères en environnements marin et thermique : de la caractérisation accélérée au calcul de structure, p.13, 2010.

H. Leaderman, Textile Materials and the Time Factor, Textile Research, vol.11, issue.4, pp.171-193, 1941.

W. M. Madigosky, G. F. Lee, and J. M. Niemiec, A method for modeling polymer viscoelastic data and the temperature shift function, The Journal of the Acoustical Society of America, vol.119, issue.6, pp.3760-3765, 2006.

J. Majest, Renforcement des élastomères. Techniques de l'ingénieur, p.18, 2017.

. Metravib, User manual DMA + 1000, 2000.

. Mettler-toledo, Interprétation des courbes DSC Partie 1 : mesures dynamiques, p.56, 2000.

A. W. Nolle, Dynamic mechanical properties of rubberlike materials, Journal of Polymer Science, vol.5, issue.1, pp.1-54, 1950.

J. Parot and B. Duperray, Applications of exact causality relationships to materials dynamic analysis, Mechanics of Materials, vol.39, pp.419-433, 2007.

A. R. Payne, The dynamic properties of carbon black loaded natural rubber vulcanizates. Part II, Journal of Applied Polymer Science, vol.6, issue.21, pp.368-372, 1962.

J. Perez and P. F. Gobin, Phénomènes de relaxation et frottement intérieur dans les solides vitreux, p.53, 1977.

N. Peyret, Dissipation de l'énergie mécanique dans les assemblages : effet du frottement en sollicitation dynamique, 2012.

. Pi, Piezoelectric Ceramic Products, 2014.

V. Placet and E. Foltete, Is Dynamic Mechanical Analysis (DMA) a non-resonance technique ?, EPJ Web of Conferences, vol.6, 2010.
URL : https://hal.archives-ouvertes.fr/hal-02300584

D. J. Plazek, Temperature Dependence of the Viscoelastic Behavior of Polystyrene, The Journal of Physical Chemistry, vol.69, issue.10, pp.3480-3487, 1965.

D. J. Plazek, Bingham Medal Address : Oh, thermorheological simplicity, Journal of Rheology, vol.40, issue.6, pp.987-1014, 1995.

A. Plouin and E. Balmes, A Test Validated Model of Plates with Constrained Viscoelastic Materials, International Modal Analysis Conference, vol.73, pp.194-200, 1999.

M. Rakotondrabe, I. A. Ivan, S. Khadraoui, P. Lutz, M. Rakotondrabe et al., Simultaneous Displacement / Force Self-Sensing in Piezoelectric Actuators and Applications to Robust To cite this version : Simultaneous displacement / force self-sensing in piezoelectric actuators, p.83, 2016.

F. Renaud, Etude de l'incidence des comportements dissipatifs dans les instabilités vibratoires des systèmes de freinage, p.18, 2011.

F. Renaud, G. Chevallier, J. Dion, and R. Lemaire, Viscoelasticity Measurement and Identification of Viscoelastic Parametric Models, 23rd Biennial Conference on Mechanical Vibration and Noise, Parts A and B, vol.1, p.71, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01369217

F. Renaud, J. Dion, G. Chevallier, I. Tawfiq, and R. Lemaire, A new identification method of viscoelastic behavior : Application to the generalized Maxwell model, Mechanical Systems and Signal Processing, vol.25, issue.3, pp.991-1010, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00708819

L. Rouleau, J. Deü, A. Legay, and F. L. Lay, Application of Kramers -Kronig relations to time -temperature superposition for viscoelastic materials, Mechanics of Materials, vol.65, p.57, 2013.

P. E. Rouse, A Theory of the Linear Viscoelastic Properties of Dilute Solutions of Coiling Polymers, The Journal of Chemical Physics, vol.21, issue.7, pp.1272-1280, 1953.

J. Salençon, Viscoélasticité pour le calcul des structures. Les Éditions de l'École Polytechnique, vol.14, 2009.

F. Schwarzl and A. J. Staverman, Time-Temperature Dependence of Linear Viscoelastic Behavior, Journal of Applied Physics, vol.23, issue.8, pp.838-843, 1952.

F. R. Schwarzl and F. Zahradnik, The time temperature position of the glass-rubber transition of amorphous polymers and the free volume, Rheologica Acta, vol.19, issue.2, pp.137-152, 1980.

S. Sihn and S. S. Tsai, Automated shift for time-temperature superposition, International Conference on Composite Science and Technology, pp.51-89, 1999.

J. P. Szabo and I. A. Keough, Method for analysis of dynamic mechanical thermal analysis data using the Havriliak-Negami model, Thermochimica Acta, pp.392-393, 2002.

S. Takahashi, Cole-Cole's circular arc rule on dynamic properties of viscoelastic materials, Journal of Colloid Science, vol.9, issue.4, pp.313-320, 1954.

G. Teyssèdre and C. Lacabanne, Caractérisation des polymères par analyse thermique, 1997.

A. V. Tobolsky and J. R. Mcloughlin, Viscoelastic Properties of Crystalline Polymers : Polytrifluorochloroethylene, The Journal of Physical Chemistry, vol.59, issue.9, pp.989-990, 1955.

M. Van-gurp and J. Palmen, Time-temperature superposition for polymeric blends, Rheol. Bull, vol.65, p.35, 1998.

M. L. Williams, R. F. Landel, and J. D. Ferry, The Temperature Dependence of Relaxation Mechanisms in Amorphous Polymers and Other Glass-forming Liquids, Journal of American chemical society, vol.77, issue.12, pp.3701-3707, 1955.

J. Zhao, W. G. Knauss, and G. Ravichandran, Applicability of the time-temperature superposition principle in modeling dynamic response of a polyurea, Mechanics of Time-Dependent Materials, vol.11, issue.3-4, pp.289-308, 2007.