P. L. Andresen and G. S. Was, Irradiation Assisted Stress Corrosion Cracking, Comprehensive Nuclear Materials, pp.177-205, 2012.

A. Bach, Etude du piégeage de l'hydrogène dans un acier inoxydable austénitique dans le cadre de la corrosion sous contrainte assistée par l'irradiation, 2018.

R. S. Barnes, G. B. Redding, and A. H. Cottrbll, The observation of vacancy sources in metals, Philos Mag J Theor Exp Appl Phys, vol.3, pp.97-99, 1958.

P. O. Barrioz, Rupture ductile des matériaux CFC irradiés, 2019.

H. Bei, S. Shim, and M. K. Miller, Effects of focused ion beam milling on the nanomechanical behavior of a molybdenum-alloy single crystal, Appl Phys Lett, vol.91, p.111915, 2007.

H. Bei, S. Shim, G. M. Pharr, and E. P. George, Effects of pre-strain on the compressive stress-strain response of Mo-alloy single-crystal micropillars, Acta Mater, vol.56, pp.4762-4770, 2008.

M. Bettayeb, V. Maurice, and L. H. Klein, Nanoscale Intergranular Corrosion and Relation with Grain Boundary Character as Studied In Situ on Copper, J Electrochem Soc, vol.165, pp.835-841, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02349650

M. Boisson, Irradiation effects on the oxidation first stages of a 316L austenitic stainless steel, 2018.

D. Brimbal, L. Fournier, and A. Barbu, Cluster dynamics modeling of the effect of high dose irradiation and helium on the microstructure of austenitic stainless steels, J Nucl Mater, 2016.

S. M. Bruemmer, D. J. Edwards, and E. P. Simonen, Characterization of Neutron-Irradiated 300-Series Stainless Steels to Assess Mechanisms of Irradiation-Assisted Stress Corrosion Cracking, 2000.

S. M. Bruemmer, E. P. Simonen, and P. M. Scott, Radiation-induced material changes and susceptibility to intergranular failure of light-water-reactor core internals, J Nucl Mater, vol.274, pp.299-314, 1999.

J. T. Busby, M. C. Hash, and G. S. Was, The relationship between hardness and yield stress in irradiated austenitic and ferritic steels, J Nucl Mater, vol.336, pp.267-278, 2005.

C. Cawthorne and E. J. Fulton, Voids in Irradiated Stainless Steel, Nature, vol.216, pp.575-576, 1967.

Y. Chen, P. H. Chou, and E. A. Marquis, Quantitative atom probe tomography characterization of microstructures in a proton irradiated 304 stainless steel, J Nucl Mater, vol.451, pp.130-136, 2014.

G. M. Cheng, W. Z. Xu, and Y. Q. Wang, Grain size effect on radiation tolerance of nanocrystalline Mo, Scr Mater, vol.123, pp.90-94, 2016.

O. K. Chopra and A. S. Rao, A review of irradiation effects on LWR core internal materials -IASCC susceptibility and crack growth rates of austenitic stainless steels, J Nucl Mater, vol.409, pp.235-256, 2011.

W. J. Choyke, J. N. Mcgruer, and J. R. Townsend, Helium effects in ion-bombarded 304 stainless steel, J Nucl Mater, vol.85, pp.90333-90340, 1979.

S. Cissé, Influence de la localisation de la déformation plastique sur la Corrosion sous Contrainte des aciers inoxydables. Application à l'IASCC des internes de cuve, 2012.

P. Deng, Q. Peng, and E. Han, Effect of irradiation on corrosion of 304 nuclear grade stainless steel in simulated PWR primary water, Corros Sci, vol.127, pp.91-100, 2017.

D. M. Dimiduk, M. D. Uchic, and T. A. Parthasarathy, Size-affected single-slip behavior of pure nickel microcrystals, Acta Mater, vol.53, pp.4065-4077, 2005.

C. K. Dolph, D. J. Da-silva, M. J. Swenson, and J. P. Wharry, Plastic zone size for nanoindentation of irradiated Fe-9%Cr ODS, J Nucl Mater, vol.481, pp.33-45, 2016.

Y. Dong, B. H. Sencer, F. A. Garner, and E. A. Marquis, Microchemical and microstructural evolution of AISI 304 stainless steel irradiated in EBR-II at PWR-relevant dpa rates, J Nucl Mater, vol.467, pp.692-702, 2015.

D. J. Dunstan and A. J. Bushby, The scaling exponent in the size effect of small scale plastic deformation, Int J Plast, vol.40, pp.152-162, 2013.

J. W. Edington, K. N. Melton, and C. P. Cutler, Superplasticity. Prog Mater Sci, vol.21, pp.61-170, 1976.

D. J. Edwards, F. A. Garner, S. M. Bruemmer, and P. Efsing, Nano-cavities observed in a 316SS PWR flux thimble tube irradiated to 33 and 70 dpa, J Nucl Mater, vol.384, pp.249-255, 2009.

D. J. Edwards, E. P. Simonen, and F. A. Garner, Influence of irradiation temperature and dose gradients on the microstructural evolution in neutron-irradiated 316SS, J Nucl Mater, vol.317, pp.32-45, 2003.

J. A. El-awady, Unravelling the physics of size-dependent dislocation-mediated plasticity, Nat Commun, vol.6, p.5926, 2015.

A. Etienne, P. Pareige, and B. Radiguet, Study of irradiation effects in austenitic stainless steels, 2010.
URL : https://hal.archives-ouvertes.fr/tel-00452297

A. Etienne, B. Radiguet, and N. J. Cunningham, Atomic scale investigation of radiation-induced segregation in austenitic stainless steels, J Nucl Mater, vol.406, pp.244-250, 2010.
URL : https://hal.archives-ouvertes.fr/hal-02107672

K. Farrell, R. W. Chickering, and L. K. Mansur, The role of helium in the development of damage structure and swelling in neutron-irradiated aluminium, Philos Mag A, vol.53, pp.1-26, 1986.

K. Farrell and N. H. Packan, A helium-induced shift in the temperature dependence of swelling, J Nucl Mater, vol.85, pp.683-687, 1979.

, Femtotools Cellule de force Femtotools FT-S10000

K. Fujii and K. Fukuya, Irradiation-induced microchemical changes in highly irradiated 316 stainless steel, J Nucl Mater, 2016.

K. Fujimoto, T. Yonezawa, and E. Wachi, Effect of the accelerated irradiation and hydrogen/helium gas on IASCC characteristics for highly irradiated austenitic stainless steels, pp.299-310, 2005.

K. Fukuya, K. Fujii, H. Nishioka, and Y. Kitsunai, Evolution of Microstructure and Microchemistry in Cold-worked 316 Stainless Steels under PWR Irradiation, J Nucl Sci Technol, vol.43, pp.159-173, 2006.

K. Fukuya, S. Shima, H. Kayano, and M. Narui, Stress corrosion cracking and intergranular corrosion of neutron irradiated austenitic stainless steels, J Nucl Mater, vol.191, p.90626, 1992.

F. A. Garner, Radiation damage in austenitic stainless steels, Konings RJM (ed) Comprehensive Nuclear Materials, pp.33-95, 2012.

F. A. Garner, Impact of the injected interstitial on the correlation of charged particle and neutron-induced radiation damage, J Nucl Mater, vol.117, pp.177-197, 1983.

D. S. Gelles, Effects of stress on microstructural evolution during irradiation, J Nucl Mater, vol.205, pp.146-161, 1993.

V. Y. Gertsman and S. M. Bruemmer, Study of grain boundary character along intergranular stress corrosion crack paths in austenitic alloys, Acta Mater, vol.49, pp.1589-1598, 2001.

J. G. Gigax, E. Aydogan, and T. Chen, The influence of ion beam rastering on the swelling of selfion irradiated pure iron at 450 °C, J Nucl Mater, vol.465, pp.343-348, 2015.

J. R. Greer and J. De-hosson, Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect, Prog Mater Sci, vol.56, pp.654-724, 2011.

E. M. Grieveson, D. Armstrong, S. Xu, and S. G. Roberts, Compression of self-ion implanted iron micropillars, J Nucl Mater, vol.430, pp.119-124, 2012.

M. Griffiths, L. Walters, L. R. Greenwood, and F. A. Garner, Accelerated materials evaluation for nuclear applications, J Nucl Mater, vol.488, pp.46-62, 2017.

P. Guiraldenq and O. H. Duparc, The genesis of the Schaeffler diagram in the history of stainless steel, Metall Res Technol, vol.114, p.613, 2017.

Q. Guo, P. Landau, and P. Hosemann, Helium Implantation Effects on the Compressive Response of Cu Nanopillars, Small, vol.9, pp.691-696, 2013.

J. Gupta, Intergranular stress corrosion cracking of ion irradiated SA 304L austenitic stainless steel in PWR environment, 2016.

J. Gupta, J. Hure, and B. Tanguy, Characterization of ion irradiation effects on the microstructure, hardness, deformation and crack initiation behavior of austenitic stainless steel:Heavy ions vs protons, J Nucl Mater, vol.501, pp.45-58, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01780338

M. N. Gussev and K. J. Leonard, In situ SEM-EBSD analysis of plastic deformation mechanisms in neutron-irradiated austenitic steel, J Nucl Mater, vol.517, pp.45-56, 2019.

F. M. Halliday, D. Armstrong, J. D. Murphy, and S. G. Roberts, Nanoindentation and Micromechanical Testing of Iron-Chromium Alloys Implanted with Iron Ions, Adv Mater Res, vol.59, pp.304-307, 2009.

W. Han, M. Ding, and Z. Shan, Cracking behavior of helium-irradiated small-volume copper, Scr Mater, vol.147, pp.1-5, 2018.

M. C. Hash, J. T. Busby, G. S. Was, and G. S. Was, The Effect of Hardening Source in Proton Irradiation-Assisted Stress Corrosion Cracking of Cold Worked Type 304 Stainless Steel, Eff Radiat Mater 21st Int Symp, 2004.

M. He, D. C. Johnson, G. S. Was, and I. M. Robertson, The role of grain boundary microchemistry in irradiation-assisted stress corrosion cracking of a Fe-13Cr-15Ni alloy, Acta Mater, vol.138, pp.61-71, 2017.

J. R. Hesterberg, Z. Jiao, and G. S. Was, IASCC Susceptibility of 304L Stainless Steel Irradiated in a BWR and Subjected to Post Irradiation Annealing, Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems -Water Reactors, pp.1015-1026, 2017.

P. Hosemann, Small-scale mechanical testing on nuclear materials: bridging the experimental length-scale gap, Scr Mater, vol.143, pp.161-168, 2018.

P. Hosemann, . Dai-y, and . Stergar-e, Small-Scale Testing of In-Core Fast Reactor Materials, J Nucl Sci Technol, vol.48, pp.575-579, 2011.

P. Hosemann, D. Kiener, Y. Wang, and S. A. Maloy, Issues to consider using nano indentation on shallow ion beam irradiated materials, J Nucl Mater, vol.425, pp.136-139, 2012.

P. Hosemann, C. Shin, and D. Kiener, Small scale mechanical testing of irradiated materials, J Mater Res, vol.30, pp.1231-1245, 2015.

P. Hosemann, E. Stergar, and L. Peng, Macro and microscale mechanical testing and local electrode atom probe measurements of STIP irradiated F82H, Fe-8Cr ODS and Fe-8Cr-2W ODS, J Nucl Mater, vol.417, pp.274-278, 2011.

P. Hosemann, J. G. Swadener, and D. Kiener, An exploratory study to determine applicability of nano-hardness and micro-compression measurements for yield stress estimation, J Nucl Mater, vol.375, pp.135-143, 2008.

E. Hosseinian, S. Gupta, O. N. Pierron, and M. Legros, Size effects on intergranular crack growth mechanisms in ultrathin nanocrystalline gold free-standing films, Acta Mater, vol.143, pp.77-87, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01984061

H. F. Huang, D. H. Li, and J. J. Li, Nanostructure Variations and Their Effects on Mechanical Strength of Ni-17Mo-7Cr Alloy under Xenon Ion Irradiation, Mater Trans, vol.55, pp.1243-1247, 2014.

J. Hütsch and E. T. Lilleodden, The influence of focused-ion beam preparation technique on microcompression investigations: Lathe vs. annular milling, Scr Mater, vol.77, pp.49-51, 2014.

A. Jenssen, L. G. Ljungberg, J. Walmsley, and S. Fisher, Importance of Molybdenum on Irradiation-Assisted Stress Corrosion Cracking in Austenitic Stainless Steels, CORROSION, vol.54, pp.48-60, 1998.

Z. Jiao, J. Michalicka, and G. S. Was, Self-ion emulation of high dose neutron irradiated microstructure in stainless steels, J Nucl Mater, vol.501, pp.312-318, 2018.

Z. Jiao and G. Was, Oxidation of a Proton-Irradiated 316 Stainless Steel in Simulated BWR NWC Environment, Proceedings of the 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems -Water Reactors, pp.1329-1338, 2016.

Z. Jiao, G. Was, T. Miura, and K. Fukuya, Aspects of ion irradiations to study localized deformation in austenitic stainless steels, J Nucl Mater, vol.452, pp.328-334, 2014.

Z. Jiao and G. S. Was, Impact of localized deformation on IASCC in austenitic stainless steels, J Nucl Mater, vol.408, pp.246-256, 2011.

Z. Jiao and G. S. Was, Localized deformation and IASCC initiation in austenitic stainless steels, J Nucl Mater, vol.382, pp.203-209, 2008.

Z. Jiao and G. S. Was, The role of irradiated microstructure in the localized deformation of austenitic stainless steels, J Nucl Mater, vol.407, pp.34-43, 2010.

Z. Jiao and G. S. Was, Novel features of radiation-induced segregation and radiation-induced precipitation in austenitic stainless steels, Acta Mater, vol.59, pp.1220-1238, 2011.

Z. Jiao and G. S. Was, Precipitate behavior in self-ion irradiated stainless steels at high doses, J Nucl Mater, vol.449, pp.200-206, 2014.

Z. Jiao and G. S. Was, Segregation behavior in proton-and heavy-ion-irradiated ferritic-martensitic alloys, Acta Mater, vol.59, pp.4467-4481, 2011.

H. Jin, E. Ko, and J. Kwon, Evaluation of critical resolved shear strength and deformation mode in proton-irradiated austenitic stainless steel using micro-compression tests, J Nucl Mater, vol.470, pp.155-163, 2016.

H. Jin, E. Ko, and S. Lim, Effect of irradiation temperature on microstructural changes in self-ion irradiated austenitic stainless steel, J Nucl Mater, vol.493, pp.239-245, 2017.

H. Jin, S. Lim, and J. Kwon, Characterization of the martensite phase formed during hydrogen ion irradiation in austenitic stainless steel, Nucl Instrum Methods Phys Res Sect B Beam Interact Mater At, vol.409, pp.318-322, 2017.

E. Johnson, L. Gråbaek, and A. Johansen, Martensitic transformations in 304 stainless steel after implantation with helium, hydrogen and deuterium, Nucl Instrum Methods Phys Res Sect B Beam Interact Mater At, vol.39, pp.567-572, 1989.

S. Jublot-leclerc, M. Lescoat, and F. Fortuna, TEM study of the nucleation of bubbles induced by He implantation in 316L industrial austenitic stainless steel, J Nucl Mater, vol.466, pp.646-652, 2015.
URL : https://hal.archives-ouvertes.fr/in2p3-01202488

S. Jublot-leclerc, X. Li, and L. Legras, Cavity nucleation and growth in dual beam irradiated 316L industrial austenitic stainless steel, J Nucl Mater, vol.494, pp.240-251, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01584640

C. D. Judge, N. Gauquelin, and L. Walters, Intergranular fracture in irradiated Inconel X-750 containing very high concentrations of helium and hydrogen, J Nucl Mater, vol.457, pp.165-172, 2015.

Y. Katoh, Y. Kohno, and A. Kohyama, Dual-ion irradiation effects on microstructure of austenitic alloys, J Nucl Mater, vol.205, issue.93, p.90100, 1993.

E. A. Kenik, The influence of helium on microstructural evolution in an ion-irradiated lowswelling stainless steel, J Nucl Mater, vol.85, pp.659-663, 1979.

G. Kermouche, J. Loubet, and J. Bergheau, An approximate solution to the problem of cone or wedge indentation of elastoplastic solids, Comptes Rendus Mécanique, vol.333, pp.389-395, 2005.

W. Kesternich, Helium trapping at dislocations, precipitates and grain boundaries, Radiat Eff, vol.78, pp.261-273, 1983.

D. Kiener, P. Hosemann, S. A. Maloy, and A. M. Minor, situ nanocompression testing of irradiated copper, vol.10, p.3055, 2011.

D. Kiener and A. M. Minor, Source Truncation and Exhaustion: Insights from Quantitative in situ TEM Tensile Testing, Nano Lett, vol.11, pp.3816-3820, 2011.

D. Kiener, A. M. Minor, and O. Anderoglu, Application of small-scale testing for investigation of ion-beam-irradiated materials, J Mater Res, vol.27, pp.2724-2736, 2012.

D. Kiener, C. Motz, and G. Dehm, Micro-compression testing: A critical discussion of experimental constraints, Mater Sci Eng A, vol.505, pp.79-87, 2009.

H. Kinoshita, H. Takahashi, and D. Gustiono, Ion Implantation Induced Martensite Nucleation in SUS301 Steel, Mater Trans, vol.48, pp.924-930, 2007.

M. Kodama, J. Morisawa, and S. Nishimura, Stress corrosion cracking and intergranular corrosion of austenitic stainless steels irradiated at 323 K, J Nucl Mater, vol.212, pp.1509-1514, 1994.

O. Kraft, P. A. Gruber, R. Mönig, and D. Weygand, Plasticity in Confined Dimensions, Annu Rev Mater Res, vol.40, pp.293-317, 2010.

P. Landau, Q. Guo, and P. Hosemann, Deformation of as-fabricated and helium implanted 100nm-diameter iron nano-pillars, Mater Sci Eng A, vol.612, pp.316-325, 2014.

L. Millier, M. Lee, S. Jeong, J. Kim, and Y. , Fragilisation des aciers inoxydables austénitiques sous irradiation-évolution de la microstructure et amorçage de l'IASCC en milieu REP, Acta Mater, vol.110, pp.283-294, 2014.

G. Lei, R. Xie, and H. Huang, The effect of He bubbles on the swelling and hardening of UNS N10003 alloy, J Alloys Compd, vol.746, pp.153-158, 2018.

N. Li, N. A. Mara, and Y. Q. Wang, Compressive flow behavior of Cu thin films and Cu/Nb multilayers containing nanometer-scale helium bubbles, Scr Mater, vol.64, pp.974-977, 2011.

T. Liu, S. Xia, and Q. Bai, Three-dimensional study of grain boundary engineering effects on intergranular stress corrosion cracking of 316 stainless steel in high temperature water, J Nucl Mater, vol.498, pp.290-299, 2018.

Y. Liu and A. Ngan, Depth dependence of hardness in copper single crystals measured by nanoindentation, Scr Mater, vol.44, pp.237-241, 2001.

J. Lu, L. Hultman, and E. Holmström, Stacking fault energies in austenitic stainless steels, Acta Mater, vol.111, pp.39-46, 2016.

A. Lupinacci, K. Chen, and Y. Li, Characterization of ion beam irradiated 304 stainless steel utilizing nanoindentation and Laue microdiffraction, J Nucl Mater, vol.458, pp.70-76, 2015.

J. K. Mackenzie, Second Paper on Statistics Associated with the Random Disorientation of Cubes, Biometrika, vol.45, pp.229-240, 1958.

J. Malaplate, B. Michaut, and A. Renault-laborne, Characterization of ion irradiated microstructure and cavity swelling evolution up to high doses in austenitic stainless steels representative of PWR internals, J Nucl Mater, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02108234

L. K. Mansur, Correlation of neutron and heavy-ion damage: II. The predicted temperature shift if swelling with changes in radiation dose rate, J Nucl Mater, vol.78, pp.156-160, 1978.

E. A. Marquis, Atom probe tomography applied to the analysis of irradiated microstructures, J Mater Res, vol.30, 2015.

P. J. Maziasz and C. J. Mchargue, Microstructural evolution in annealed austenitic steels during neutron irradiation, Int Mater Rev, vol.32, pp.190-219, 1987.

M. D. Mcmurtrey, B. Cui, and I. Robertson, Mechanism of dislocation channel-induced irradiation assisted stress corrosion crack initiation in austenitic stainless steel, Curr Opin Solid State Mater Sci, vol.19, pp.305-314, 2015.

G. Meric-de-bellefon and J. C. Van-duysen, Tailoring plasticity of austenitic stainless steels for nuclear applications: Review of mechanisms controlling plasticity of austenitic steels below 400 °C, J Nucl Mater, vol.475, pp.168-191, 2016.

B. Michaut, Caractérisation et modélisation de l'évolution de la microstructure et du gonflement d'aciers austénitiques représentatifs des internes inférieurs de réacteurs à eau pressurisée sous irradiations aux ions, 2017.

T. Miura, K. Fujii, and K. Fukuya, Micro-mechanical investigation for effects of helium on grain boundary fracture of austenitic stainless steel, J Nucl Mater, vol.457, pp.279-290, 2015.

T. Miura, K. Fujii, K. Fukuya, and Y. Ito, Characterization of deformation structure in ion-irradiated stainless steels, J Nucl Mater, vol.386, pp.210-213, 2009.

F. Mompiou, M. Legros, and A. Sedlmayr, Source-based strengthening of sub-micrometer Al fibers, Acta Mater, vol.60, pp.977-983, 2012.

G. Monnet, Mechanical and energetical analysis of molecular dynamics simulations of dislocation-defect interactions, Acta Mater, vol.55, pp.5081-5088, 2007.
URL : https://hal.archives-ouvertes.fr/hal-01830738

B. Moser, K. Wasmer, L. Barbieri, and J. Michler, Strength and fracture of Si micropillars: A new scanning electron microscopy-based micro-compression test, J Mater Res, vol.22, pp.1004-1011, 2007.

S. Nanga-nyongha, Comportement et transformations martensitiques de deux aciers inoxydables austénitiques : effets de la température, 2008.

R. S. Nelson, D. J. Mazey, and J. A. Hudson, The use of ion accelerators to simulate fast neutron-induced voidage in metals, J Nucl Mater, vol.37, pp.1-12, 1970.

V. S. Neustroev and F. A. Garner, Very high swelling and embrittlement observed in a Fe-18Cr-10Ni-Ti hexagonal fuel wrapper irradiated in the BOR-60 fast reactor, J Nucl Mater, vol.378, pp.327-332, 2008.

W. D. Nix and H. Gao, Indentation size effects in crystalline materials: A law for strain gradient plasticity, J Mech Phys Solids, vol.46, pp.411-425, 1998.

T. Okita, T. Sato, and N. Sekimura, The primary origin of dose rate effects on microstructural evolution of austenitic alloys during neutron irradiation, J Nucl Mater, vol.1, pp.322-326, 2002.

. Oliver-w-c and G. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J Mater Res, vol.7, pp.1564-1583, 1992.

T. Onchi, K. Dohi, and N. Soneda, Mechanism of irradiation assisted stress corrosion crack initiation in thermally sensitized 304 stainless steel, J Nucl Mater, vol.340, pp.219-236, 2005.

S. Özerinç, R. S. Averback, and W. P. King, In situ creep measurements on micropillar samples during heavy ion irradiation, J Nucl Mater, vol.451, 2014.

P. Pareige, A. Etienne, and B. Radiguet, Experimental atomic scale investigation of irradiation effects in CW 316SS and UFG-CW 316SS, J Nucl Mater, vol.389, pp.259-264, 2009.
URL : https://hal.archives-ouvertes.fr/hal-02107659

J. E. Pawel, A. F. Rowcliffe, G. E. Lucas, and S. J. Zinkle, Irradiation performance of stainless steels for ITER application, J Nucl Mater, vol.239, pp.126-131, 1996.

S. Perrin, L. Marchetti, and C. Duhamel, Influence of Irradiation on the Oxide Film Formed on 316 L Stainless Steel in PWR Primary Water, Oxid Met, vol.80, pp.623-633, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00931257

G. M. Pharr, E. G. Herbert, and Y. Gao, The Indentation Size Effect: A Critical Examination of Experimental Observations and Mechanistic Interpretations, Annu Rev Mater Res, vol.40, pp.271-292, 2010.

C. Pokor, Caractérisation microstructurale et modélisation du durcissement des aciers austénitiques irradiés des structures internes des REP, 2003.

C. Pokor, C. Benhamou, G. Courtemanche, and P. Dubuisson, Matériaux des structures internes de cuve REL, Evolution du choix des matériaux : petites et grandes histoires. SFEN, 2008.

C. Pokor, Y. Brechet, and P. Dubuisson, Irradiation damage in 304 and 316 stainless steels: experimental investigation and modeling. Part II: Irradiation induced hardening, J Nucl Mater, vol.326, pp.30-37, 2004.

C. Pokor, Y. Brechet, and P. Dubuisson, Irradiation damage in 304 and 316 stainless steels: experimental investigation and modeling. Part I: Evolution of the microstructure, J Nucl Mater, vol.326, pp.19-29, 2004.

M. A. Pouchon, J. Chen, and R. Ghisleni, Characterization of Irradiation Damage of Ferritic ODS Alloys with Advanced Micro-Sample Methods, Exp Mech, vol.50, pp.79-84, 2010.

A. Prasitthipayong, D. Frazer, and A. Kareer, Micro mechanical testing of candidate structural alloys for Gen-IV nuclear reactors, Nucl Mater Energy, vol.16, pp.34-45, 2018.

L. Priester, Approche géométrique des joints de grains. Intérêt et limite, Rev Phys Appliquée, vol.15, pp.789-830, 1980.

S. Rahimi, D. L. Engelberg, J. A. Duff, and T. J. Marrow, In situ observation of intergranular crack nucleation in a grain boundary controlled austenitic stainless steel, J Microsc, vol.233, pp.423-431, 2009.

V. Randle and B. Ralph, Grain boundary structure and mechanical properties, Rev Phys Appliquée, vol.23, pp.501-512, 1988.
URL : https://hal.archives-ouvertes.fr/jpa-00245797

O. Raquet, E. Herms, and F. Vaillant, Effect of cold work hardening on stress corrosion cracking of stainless steels in primary water of pressurized water reactors, p.12, 2004.

A. Reichardt, A. Lupinacci, and D. Frazer, Nanoindentation and in situ microcompression in different dose regimes of proton beam irradiated 304 SS, J Nucl Mater, vol.486, pp.323-331, 2017.

A. Renault-laborne, J. Garnier, and J. Malaplate, Evolution of microstructure after irradiation creep in several austenitic steels irradiated up to 120 dpa at 320 °C, J Nucl Mater, vol.475, pp.209-226, 2016.
URL : https://hal.archives-ouvertes.fr/cea-02381473

A. Renault-laborne, J. Hure, and J. Malaplate, Tensile properties and deformation microstructure of highly neutron-irradiated 316 stainless steels at low and fast strain rate, J Nucl Mater, 2018.
URL : https://hal.archives-ouvertes.fr/cea-02421734

N. Sakaguchi, M. Endo, and S. Watanabe, Radiation-induced segregation and corrosion behavior on ?3 coincidence site lattice and random grain boundaries in proton-irradiated type-316L austenitic stainless steel, J Nucl Mater, vol.434, pp.65-71, 2013.

A. L. Schaeffler, Constitution Diagram for Stainless Steel Weld Metal, Met Prog, vol.56, p.680, 1949.

Y. Sekio, S. Yamashita, N. Sakaguchi, and H. Takahashi, Void denuded zone formation for Fe-15Cr-15Ni steel and PNC316 stainless steel under neutron and electron irradiations, J Nucl Mater, vol.458, pp.355-360, 2015.

B. H. Sencer, G. S. Was, and M. Sagisaka, Proton irradiation emulation of PWR neutron damage microstructures in solution annealed 304 and cold-worked 316 stainless steels, J Nucl Mater, vol.323, pp.18-28, 2003.

L. Shao, C. Wei, and J. Gigax, Effect of defect imbalance on void swelling distributions produced in pure iron irradiated with 3.5MeV self-ions, J Nucl Mater, vol.453, pp.176-181, 2014.

J. A. Sharon, K. Hattar, B. L. Boyce, and L. N. Brewer, Compressive Properties of ?110? Cu Micro-Pillars after High-Dose Self-Ion Irradiation, Mater Res Lett, vol.2, pp.57-62, 2014.

N. Shigenaka, S. Ono, and Y. Isobe, Radiation Induced Segregation at Grain Boundary in an Austenitic Stainless Steel under Ion Irradiation, J Nucl Sci Technol, vol.33, pp.474-478, 1996.

C. Shin, S. Lim, and H. Jin, Development and testing of microcompression for post irradiation characterization of ODS steels, J Nucl Mater, vol.444, pp.43-48, 2014.

B. N. Singh, Void Volume Swelling dependent on Grain Size in an Austenitic Stainless Steel, Nature, vol.244, pp.142-142, 1973.

B. N. Singh, On the influence of grain boundaries on void growth, Philos Mag, vol.28, pp.1409-1413, 1973.

D. Singh, N. Chawla, G. Tang, and Y. Shen, Micropillar compression of Al/SiC nanolaminates, Acta Mater, vol.58, pp.6628-6636, 2010.

. Sneddon, The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile, Int J Eng Sci, vol.3, pp.47-57, 1965.

K. J. Stephenson and G. S. Was, Comparison of the microstructure, deformation and crack initiation behavior of austenitic stainless steel irradiated in-reactor or with protons, J Nucl Mater, vol.456, pp.85-98, 2015.

R. E. Stoller, The influence of helium on microstructural evolution: Implications for DT fusion reactors, J Nucl Mater, vol.174, pp.289-310, 1990.

R. E. Stoller, M. B. Toloczko, and G. S. Was, On the use of SRIM for computing radiation damage exposure, Nucl Instrum Methods Phys Res Sect B Beam Interact Mater At, vol.310, pp.75-80, 2013.

P. Sudharshan-phani, K. E. Johanns, E. P. George, and G. M. Pharr, A simple stochastic model for yielding in specimens with limited number of dislocations, Acta Mater, vol.61, pp.2489-2499, 2013.

C. Sun, F. A. Garner, and L. Shao, Influence of injected interstitials on the void swelling in two structural variants of 304L stainless steel induced by self-ion irradiation at 500 °C, Nucl Instrum Methods Phys Res Sect B Beam Interact Mater At, vol.409, pp.323-327, 2017.

C. Sun and Z. , Superior radiation-resistant nanoengineered austenitic 304L stainless steel for applications in extreme radiation environments, Scientific Reports. Sci Rep, 2015.

A. Tallaire, J. Achard, and F. Silva, Growth of large size diamond single crystals by plasma assisted chemical vapour deposition: Recent achievements and remaining challenges, Comptes Rendus Phys, vol.14, pp.169-184, 2013.

L. Tan and J. T. Busby, Formulating the strength factor ? for improved predictability of radiation hardening, J Nucl Mater, vol.465, 2015.

L. Tan, R. E. Stoller, and K. G. Field, Microstructural Evolution of Type 304 and 316 Stainless Steels Under Neutron Irradiation at LWR Relevant Conditions, JOM, vol.68, pp.517-529, 2016.

B. Tanguy, Corrosion sous contrainte assistée par l'irradiation des aciers inoxydables austénitiques (IASCC), Rev Métallurgie, vol.108, pp.39-46, 2011.

L. Thomas and S. M. Bruemmer, Analytical Transmission Electron Microscopy Characterization of Stress Corrosion Cracks in an Irradiated Type 316 Stainless Steel Core Component. Fontevraud, pp.347-359, 2002.

K. Tougou, A. Shikata, and U. Kawase, In-situ TEM observation of dynamic interaction between dislocation and cavity in BCC metals in tensile deformation, J Nucl Mater, vol.465, pp.843-848, 2015.

T. Toyama, Y. Nozawa, and W. Van-renterghem, Grain boundary segregation in neutronirradiated 304 stainless steel studied by atom probe tomography, J Nucl Mater, vol.425, pp.71-75, 2012.

D. Tumbajoy-spinel, S. S. Joao, and X. Maeder, Microstructural and mechanical properties of hyper-deformed surfaces: In-situ micro-pillar compression and EBSD investigations in ?-iron, Proceedings, pp.199-200, 2016.

M. D. Uchic and D. M. Dimiduk, A methodology to investigate size scale effects in crystalline plasticity using uniaxial compression testing, Mater Sci Eng A, 2005.

M. D. Uchic, D. M. Dimiduk, J. N. Florando, and W. D. Nix, Sample Dimensions Influence Strength and Crystal Plasticity, Science, vol.305, pp.986-989, 2004.

M. D. Uchic, P. A. Shade, and D. M. Dimiduk, Plasticity of Micrometer-Scale Single Crystals in Compression, Annu Rev Mater Res, vol.39, pp.361-386, 2009.

I. Villacampa, J. C. Chen, and P. Spätig, Helium bubble evolution and hardening in 316L by postimplantation annealing, J Nucl Mater, vol.500, pp.389-402, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01898314

I. Villacampa, J. C. Chen, and P. Spätig, Helium effects on IASCC susceptibility in as-implanted solution annealed, cold-worked and post-implantation annealed 316L steel, Corros Eng Sci Technol, vol.52, pp.567-577, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01914982

H. T. Vo, A. Reichardt, and D. Frazer, In situ micro-tensile testing on proton beam-irradiated stainless steel, J Nucl Mater, 2017.

C. A. Volkert and E. T. Lilleodden, Size effects in the deformation of sub-micron Au columns, Philos Mag, vol.86, pp.5567-5579, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00513658

Q. Wang, C. Cochrane, and F. Long, Micropillar compression study on heavy ion irradiated Zr-2.5Nb pressure tube alloy, J Nucl Mater, vol.511, pp.487-495, 2018.

R. Wang, C. Xu, and X. Liu, The studies of irradiation assisted stress corrosion cracking on reactor internals stainless steel under Xe irradiation, J Nucl Mater, vol.457, pp.130-134, 2015.

G. S. Was, Fundamentals of Radiation Materials Science, 2017.

G. S. Was and T. Allen, Intercomparison of microchemical evolution under various types of particle irradiation, J Nucl Mater, vol.205, issue.93, p.90097, 1993.

G. S. Was and P. L. Andresen, 6 -Irradiation assisted corrosion and stress corrosion cracking (IAC/IASCC) in nuclear reactor systems and components. In: Féron D (ed) Nuclear Corrosion Science and Engineering, pp.131-185, 2012.

G. S. Was and R. S. Averback, Radiation damage using ion beams, Comprehensive Nuclear Materials, Elsevier Science. Koning, Rudy J. M, pp.175-221, 2012.

G. S. Was and S. M. Bruemmer, Effects of irradiation on intergranular stress corrosion cracking, J Nucl Mater, vol.216, pp.326-347, 1994.

G. S. Was, Z. Jiao, J. T. Busby, and P. O. Box, Contribution of localized deformation to IGSCC and IASCC, 2004.

T. Watanabe and S. Tsurekawa, The control of brittleness and development of desirable mechanical properties in polycrystalline systems by grain boundary engineering, Acta Mater, vol.47, pp.4171-4185, 1999.

J. S. Weaver, S. Pathak, and A. Reichardt, Spherical nanoindentation of proton irradiated 304 stainless steel: A comparison of small scale mechanical test techniques for measuring irradiation hardening, J Nucl Mater, vol.493, pp.368-379, 2017.

E. A. West and G. S. Was, Strain incompatibilities and their role in intergranular cracking of irradiated 316L stainless steel, J Nucl Mater, vol.441, pp.623-632, 2013.

J. M. Wheeler, D. Armstrong, W. Heinz, and R. Schwaiger, High temperature nanoindentation: The state of the art and future challenges, Curr Opin Solid State Mater Sci, vol.19, pp.354-366, 2015.

J. M. Wheeler and J. Michler, Elevated temperature, nano-mechanical testing in situ in the scanning electron microscope, Rev Sci Instrum, vol.84, p.45103, 2013.

C. Xu, L. Zhang, and W. Qian, The Studies of Irradiation Hardening of Stainless Steel Reactor Internals under Proton and Xenon Irradiation, Nucl Eng Technol, vol.48, pp.758-764, 2016.

Y. Yang, Y. Chen, and Y. Huang, Irradiation Microstructure of Austenitic Steels and Cast Steels Irradiated in the BOR-60 Reactor at, p.2137, 2012.

K. H. Yano, M. J. Swenson, Y. Wu, and J. P. Wharry, TEM in situ micropillar compression tests of ion irradiated oxide dispersion strengthened alloy, J Nucl Mater, vol.483, pp.107-120, 2017.

H. Zhang, B. E. Schuster, Q. Wei, and K. T. Ramesh, The design of accurate micro-compression experiments, Scr Mater, vol.54, pp.181-186, 2006.

X. Zhao, D. J. Strickland, and P. M. Derlet, In situ measurements of a homogeneous to heterogeneous transition in the plastic response of ion-irradiated ?111? Ni microspecimens, Acta Mater, vol.88, pp.121-135, 2015.

J. F. Ziegler, J. P. Biersack, and M. D. Ziegler, SRIM -The Stopping and Range of Ions in Matter Zinkle SJ (2012) 1.03 -Radiation-Induced Effects on Microstructure* A2 -Konings, Comprehensive Nuclear Materials, pp.65-98, 2008.

S. J. Zinkle, P. J. Maziasz, and R. E. Stoller, Dose dependence of the microstructural evolution in neutronirradiated austenitic stainless steel, J Nucl Mater, vol.206, pp.266-286, 1993.