X. Chen, Large-scale synthesis of water-soluble luminescent hydroxyapatite nanorods for security printing, J. Colloid Interface Sci, vol.468, pp.300-306, 2016.

Q. Xu, W. J. Ye, S. Z. Feng, and H. Y. Sun, Synthesis and properties of iridescent Cocontaining anodic aluminum oxide films, Dye. Pigment, vol.111, pp.185-189, 2014.

N. Akafuah, S. Poozesh, A. Salaimeh, G. Patrick, K. Lawler et al., Evolution of the Automotive Body Coating Process-A Review, Coatings, vol.6, issue.2, p.24, 2016.

C. Park, K. Koh, and U. Jeong, Structural Color Painting by Rubbing Particle Powder, Sci. Rep, vol.5, pp.1-5, 2015.

M. V. Diamanti, B. D. Curto, and V. Masconale, Production and Anodic Colouring of Newly-Designed Titanium Jewels, Colour Des. Creat, vol.5, issue.16, pp.1-9, 2010.

M. Aziz-kerrzo, K. G. Conroy, A. M. Fenelon, S. T. Farrell, and C. B. Breslin, Electrochemical studies on the stability and corrosion resistance of titanium-based implant materials, Biomaterials, vol.22, pp.1531-1539, 2001.

X. H. Xie, Enhanced osteointegration of orthopaedic implant gradient coating composed of bioactive glass and nanohydroxyapatite, J. Mater. Sci. Mater. Med, vol.21, issue.7, pp.2165-2173, 2010.

N. Poondla, T. S. Srivatsan, A. Patnaik, and M. Petraroli, A study of the microstructure and hardness of two titanium alloys: Commercially pure and Ti-6Al-4V, J. Alloys Compd, vol.486, issue.1-2, pp.162-167, 2009.

W. Kroll, The Production of Ductile Titanium, Trans. Electrochem. Soc, vol.78, issue.1, p.35, 1940.

M. Niinomi, Mechanical properties of biomedical titanium alloys, Mater. Sci. Eng. A243, vol.243, pp.231-236, 1998.

D. Banerjee and J. C. Williams, Perspectives on titanium science and technology, Acta Mater, vol.61, issue.3, pp.844-879, 2013.

H. Fujii, K. Takahashi, and Y. Yamashita, Application of titanium and its alloys for automobile parts, Nippon Steel Tech. Rep, issue.88, pp.70-75, 2003.

R. R. Boyer, An overview on the use of titanium in the aerospace industry, Mater. Sci. Eng. A, vol.213, issue.1-2, pp.103-114, 1996.

M. Bellardita, Photocatalytic activity of TiO2/SiO2systems, J. Hazard. Mater, vol.174, issue.1-3, pp.707-713, 2010.

Y. Lu, K. Matsuzaka, L. Hao, Y. Hirakawa, H. Yoshida et al., Photocatalytic activity of TiO2/Ti composite coatings fabricated by mechanical coating technique and subsequent heat oxidation, Mater. Sci. Semicond. Process, vol.16, issue.6, pp.1949-1956, 2013.

M. Smits, Photocatalytic degradation of soot deposition: Self-cleaning effect on titanium dioxide coated cementitious materials, Chem. Eng. J, vol.222, pp.411-418, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01499765

S. Pazokifard, M. Esfandeh, S. M. Mirabedini, M. Mohseni, and Z. Ranjbar, Investigating the role of surface treated titanium dioxide nanoparticles on self-cleaning behavior of an acrylic facade coating, J. Coatings Technol. Res, vol.10, issue.2, pp.175-187, 2013.

V. A. Ganesh, H. K. Raut, A. S. Nair, and S. Ramakrishna, A review on self-cleaning coatings, J. Mater. Chem, vol.21, issue.41, p.16304, 2011.

M. Hunger, G. Hüsken, and H. J. Brouwers, Photocatalytic degradation of air pollutants -From modeling to large scale application, Cem. Concr. Res, vol.40, issue.2, pp.313-320, 2010.

J. Kolarik and J. Toftum, The impact of a photocatalytic paint on indoor air pollutants: Sensory assessments, Build. Environ, vol.57, pp.396-402, 2012.

K. Demeestere, J. Dewulf, B. De-witte, A. Beeldens, and H. Van-langenhove, Heterogeneous photocatalytic removal of toluene from air on building materials enriched with TiO2, Build. Environ, vol.43, issue.4, pp.406-414, 2008.

M. V. Diamanti, Photoactive and colored anodic oxides on titanium for architectural and design applications, ResearchGate, vol.1, issue.2, pp.170-173, 2008.

. Astm-e2194-14, Standard Test Method for Multiangle Color Measurement of Metal Flake Pigmented, 2017.

C. S. Mccamy, Observation and measurement of the appearance of metallic materials. Part I. Macro appearance, Color Res. Appl, vol.21, pp.292-304, 1996.

M. Bertin, J. Faroux, and J. Renault, Optique et physique ondulatoire. Dunod, 1994.

S. Kinoshita, S. Yoshioka, and J. Miyazaki, Physics of structural colors, Reports Prog. Phys, vol.71, issue.7, p.76401, 2008.

, Colorimetry: understanding the CIE system, CIE Reprin, 2006.

R. S. Berns, Billmeyer and Saltzman's Principles of Color Technology, 2000.

N. Matsapey, Rendu visuel de surfaces nano-structurees: effet de l'ordre à courte distance, 2013.
URL : https://hal.archives-ouvertes.fr/tel-00862425

E. F. Schubert, Light-Emitting Diodes, 2006.

H. A. Macleod, Bristol and Philadelphia: Institue of Physics, 2001.

F. Abelès, Recherches sur la propagation des ondes électromagnétiques sinusoidales dans les milieux stratifiés, Ann. Phys. (Paris), vol.12, issue.5, pp.706-782, 1950.

F. Abelès, La théorie générale des couches minces, J. Phys. Radium, vol.11, issue.7, pp.307-309, 1950.

M. Born and E. Wolf, Principles of optics: electromagnetic theory of propagation, interference and diffraction of light, 1964.

K. Wenzel, The fourth colour filter of tristimulus colorimeters, 1988.

D. Randall, INSTRUMENTS FOR THE MEASUREMENT OF COLOR, pp.1-11, 1954.

E. Perales, E. Chorro, V. Viqueira, and F. M. Martínez-verdú, Reproducibility comparison among multiangle spectrophotometers, Color Res. Appl, vol.38, issue.3, pp.160-167, 2013.

R. Charrière, G. Lacaille, M. P. Pedeferri, J. Faucheu, and D. Delafosse, Characterization of the gonioapparent character of colored anodized titanium surfaces, Color Res. Appl, vol.40, issue.5, pp.483-490, 2015.

F. Leloup, P. Hanselaer, M. Pointer, and J. Versluys, Characterization of gonio-apparent colours, 10th AIC Congr. Granada, pp.515-518, 2005.

J. L. Meyzonnette and T. Lépine, Bases de radiométrie optiques, 2001.

N. Matsapey, J. Faucheu, M. Flury, and D. Delafosse, Design of a gonio-spectrophotometer for optical characterization of gonio-apparent materials, Meas. Sci. Technol, vol.24, p.65901, 2013.

J. M. Yanoff and J. S. Duker, Ophthalmology, 2009.

G. Obein, S. Ouarets, and G. Ged, Evaluation of the shape of the specular peak for high glossy surfaces, Proc. SPIE 9018, pp.5-11, 2014.

H. J. Patrick, C. J. Zarobila, and T. A. Germer, The NIST Robotic Optical Scatter Instrument (ROSI) and its application to BRDF measurements of diffuse reflectance standards for remote sensing, vol.8866, p.886615, 2013.

J. E. Proctor and P. Y. Barnes, NIST high accuracy reference reflectometerspectrophotometer, J. Res. Natl. Inst. Stand. Technol, vol.101, issue.5, p.619, 1996.

G. Obein, R. Bousquet, and M. E. , New NIST reference goniospectrometer, Proc. SPIE, vol.5880, 2005.

J. G. Ward, Measuring and modeling anisotropic reflection, Comput. Graph, vol.26, issue.Jully, pp.265-272, 1992.

J. Ren and J. Zhao, Measurement of a bidirectional reflectance distribution and system achievement based on a hemi-parabolic mirror, Opt. Lett, vol.35, issue.9, p.1458, 2010.

S. Burachas, Defect clusters of variable composition as an origin of coloration of oxide crystals under thermal treatment and irradiation, Radiat. Meas, vol.42, issue.4-5, pp.561-564, 2007.

I. Komatsu, H. Aoki, M. Ebisawa, A. Kuroda, K. Kuroda et al., Color change mechanism of niobium oxide thin film with incidental light angle and applied voltage, Thin Solid Films, vol.603, pp.180-186, 2016.

M. C. Eastman, S. Jeknic, and J. Jiao, Investigation of coloration defects in porous zirconium by X-ray photoelectron spectroscopy, J. Alloys Compd, vol.728, pp.1260-1268, 2017.

K. Ogura, W. Lou, and M. Nakayama, Coloration of stainless steel at room temperature by triangular current scan method, Electrochim. Acta, vol.41, issue.18, pp.2849-2853, 1996.

Z. L. Li, Analysis of oxide formation induced by UV laser coloration of stainless steel, Appl. Surf. Sci, vol.256, issue.5, pp.1582-1588, 2009.

F. P. Netzer, Oxide Materials at the Two-Dimensional Limit, 2016.

P. Pérez-del-pino, J. L. Serra, and . Morenza, Coloring of titanium by pulsed laser processing in air, Thin Solid Films, vol.415, issue.1-2, pp.201-205, 2002.

A. Pino, J. M. Fernández-pradas, P. Serra, and J. L. Morenza, Coloring of titanium through laser oxidation: Comparative study with anodizing, Surf. Coatings Technol, vol.187, issue.1, pp.106-112, 2004.

S. O'hana, .. J. Pinkerton, K. Shoba, .. W. Gale, and L. Li, Laser surface colouring of titanium for contemporary jewellery, vol.24, pp.147-153, 2008.

S. Izman, Surface Modification Techniques for Biomedical Grade of Titanium Alloys: Oxidation , Carburization and Ion Implantation Processes, Www.Intechopen.Com, 2006.

C. Langlade, .. B. Vannes, J. M. Krafft, and J. R. Martin, Surface modification and tribological behaviour of titanium and titanium alloys after YAG-laser treatments, Surf. Coatings Technol, pp.383-387, 1998.

L. Bartlett, An unusual phenomenon observed when anodising CP titanium to produce coloured surfaces for jewellery and other decorative uses, Opt. Laser Technol, vol.38, issue.4-6, pp.440-444, 2006.

O. A. Galvis, Formation of grooved and porous coatings on titanium by plasma electrolytic oxidation in H2SO4/H3PO4 electrolytes and effects of coating morphology on adhesive bonding, Surf. Coatings Technol, vol.269, pp.238-249, 2015.

D. M. Brunette, P. Tengvall, M. Textor, and P. Thomsen, Titanium in Medicine, 2001.

M. Fazel, H. R. Salimijazi, M. Golozar, and M. R. Garsivaz, Applied Surface Science A comparison of corrosion , tribocorrosion and electrochemical impedance properties of pure Ti and Ti6Al4V alloy treated by micro-arc oxidation process, Appl. Surf. Sci, vol.324, pp.751-756, 2015.

S. Wu, H. Zhang, X. Dong, C. Ning, A. S. Fok et al., Physicochemical properties and in vitro cytocompatibility of modified titanium surfaces prepared via micro-arc oxidation with different calcium concentrations, Appl. Surf. Sci, vol.329, pp.347-355, 2015.

Y. Sul, C. B. Johansson, Y. Jeong, and T. Albrektsson, The electrochemical oxide growth behaviour on titanium in acid and alkaline electrolytes, Med. Eng. Phys, vol.23, issue.5, pp.329-346, 2001.

J. Kapusta-ko?odziej, O. Tynkevych, A. Pawlik, M. Jarosz, J. Mech et al., Electrochemical growth of porous titanium dioxide in a glycerol-based electrolyte at different temperatures, Electrochim. Acta, vol.144, pp.127-135, 2014.

M. V. Diamanti, P. Pozzi, F. Randone, B. D. Curto, and M. P. Pedeferri, Robust anodic colouring of titanium: Effect of electrolyte and colour durability, Mater. Des, vol.90, pp.1085-1091, 2016.

S. Van-gils, P. Mast, E. Stijns, and H. Terryn, Colour properties of barrier anodic oxide films on aluminium and titanium studied with total reflectance and spectroscopic ellipsometry, Surf. Coatings Technol, vol.185, issue.2-3, pp.303-310, 2004.

M. V. Diamanti and M. P. Pedeferri, Effect of anodic oxidation parameters on the titanium oxides formation, Corros. Sci, vol.49, issue.2, pp.939-948, 2007.

M. V. Diamanti, B. Curto, V. Masconale, C. Passaro, and M. P. Pedeferri, Anodic coloring of titanium and its alloy for jewels production, Color Res. Appl, vol.37, pp.384-390, 2012.

E. D. Palik, Handbook of optical constants of solids, 1998.

M. V. Diamanti, B. D. Curto, and M. Pedeferri, Interference colors of thin oxide layers on titanium, Color Res. Appl, vol.33, issue.3, pp.221-228, 2008.

A. F. Yetim, Investigation of wear behavior of titanium oxide films, produced by anodic oxidation, on commercially pure titanium in vacuum conditions, Surf. Coatings Technol, vol.205, issue.6, pp.1757-1763, 2010.

A. C. Alves, F. Oliveira, F. Wenger, P. Ponthiaux, J. Celis et al., Tribocorrosion behaviour of anodic treated titanium surfaces intended for dental implants, J. Phys. D. Appl. Phys, vol.46, issue.40, p.404001, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01240373

J. Moon, The correlation between the interference colour and growth procedure of anodic titanium dioxide nanotube arrays, Color. Technol, vol.130, issue.1, pp.1-7, 2014.

M. V. Diamanti, F. C. Spreafico, and M. P. Pedeferri, Production of Anodic TiO2 Nanofilms and their Characterization, Phys. Procedia, vol.40, pp.30-37, 2013.

H. Habazaki, M. Uozumi, H. Konno, K. Shimizu, P. Skeldon et al., Crystallization of anodic titania on titanium and its alloys, Corros. Sci, vol.45, issue.9, pp.2063-2073, 2003.

M. V. Diamanti, M. Pedeferri, and C. A. Schuh, Thickness of anodic titanium oxydes as a function of crystallographic orientation of the substrate, Metall. Mater. Trans. A, vol.39, pp.2143-2147, 2008.

P. Pedeferri, Method of coloring titanium and its alloys through anodic oxidation, 2002.

H. C. Genuino, N. N. Opembe, E. C. Njagi, S. Mcclain, and S. L. Suib, A review of hydrofluoric acid and its use in the car wash industry, J. Ind. Eng. Chem, vol.18, issue.5, pp.1529-1539, 2012.

R. Markle, Etching Titanium with HF and Nitric Acid Solutions Part 1

J. Guo, R. J. Padilla, W. Ambrose, I. J. De-kok, and L. F. Cooper, The effect of hydrofluoric acid treatment of TiO2 grit blasted titanium implants on adherent osteoblast gene expression in vitro and in vivo, Biomaterials, vol.28, pp.5418-5425, 2007.

S. F. Lamolle, M. Monjo, M. Rubert, H. J. Haugen, S. P. Lyngstadaas et al., The effect of hydrofluoric acid treatment of titanium surface on nanostructural and chemical changes and the growth of MC3T3-E1 cells, Biomaterials, vol.30, pp.736-742, 2009.

T. Kazuhiro, T. Yamazaki, T. Nishijima, and H. Shimizu, Effect of Grain Size and Initial Surface Condition on Glossiness and Whiteness of the Pickled Titanium Surface, 2002.

I. T. Kazuhiro-takashi and R. Matsuhashi, Change of Morphology of Titanium Surface by Pickling in Nitric Hydrofluoric Acid Solutions.pdf, 2002.

U. Balaji and S. K. Pradhan, Titanium anodisation designed for surface colouration -Systemisation of parametric interaction using response surface methodology, Mater. Des, vol.139, pp.409-418, 2018.

C. L. Briant, Z. F. Wang, and N. Chollocoop, Hydrogen embrittlement of commercial purity titanium, Corros. Sci, vol.44, issue.8, pp.1875-1888, 2002.

E. Tal-gutelmacher and D. Eliezer, The hydrogen embrittlement of titanium-based alloys, J. Miner. Met. Mater. Soc, vol.57, issue.9, pp.46-49, 2005.

J. R. Devore, Refractive Indices of Rutile and Sphalerite, J. Opt. Soc. Am, vol.41, issue.6, p.416, 1951.

R. M. , Azzam and B. N.M, Ellipsometry and polarized light, 1988.

A. Bendavid and P. J. Martin, Review of thin films materials deposition by the filtered cathodic vacuum arc process at CSIRO, J. Aust. Ceram. Soc, vol.501, pp.86-101, 2014.

M. Yasaka, X-ray thin-film measurement techniques, V. X-ray reflectivity Meas. Rigaku J, vol.26, issue.2, pp.1-9, 2010.

C. K. Carniglia, Scalar Scattering Theory for Multilayer Optical Coatings, Opt. Eng, vol.18, issue.2, pp.104-115, 1979.

J. M. Eastman, Surface scattering in optical interference coatings, 1974.

P. Beckmann and A. Spizzichino, The scattering of electromagnetic waves from rough surfaces / Petr Beckmann, Andre Spizzichino. -Version details -Trove, 1963.

A. Roos, M. Bergkvist, and C. G. Ribbing, Observation of diffuse interference in reflectance from oxide-coated metals, Thin Solid Films, vol.125, issue.3-4, pp.221-227, 1985.

A. Roos and B. Karlsson, Properties of oxidized copper sufaces for solar applications II, Sol. Energy Mater, vol.7, pp.467-480, 1983.

A. Roos and B. Karlsson, Properties of oxidized copper surfaces for solar applications I, Sol. Energy Mater, vol.7, issue.4, pp.453-465, 1983.

A. Roos and C. G. Ribbing, Oxidation induced roughness as observed by diffuse optical reflectance, Phys. Lett. A, vol.108, issue.4, pp.225-227, 1985.

M. Bergkvist, A. Roos, and C. G. Ribbing, Interference structure in optical scattering from oxide/metal interfaces, J. Vac. Sci. Technol. A Vacuum, Surfaces, Film, vol.5, issue.4, pp.1661-1665, 1987.

A. Roos and D. Rönnow, Diffuse reflectance and transmittance spectra of an interference layer: 1. Model formulation and properties, Appl. Opt, vol.33, issue.34, pp.7908-7917, 1994.

D. Rönnow and A. Roos, Diffuse reflectance and transmittance spectra of an interference layer: 2. Evaluation of tin oxide-coated glass, Appl. Opt, vol.33, issue.34, pp.7918-7927, 1994.

, Appendices Appendix A: Relatives spectral power distribution of CIE illuminants, pp.2539-2553, 2017.

D. Appendix, SEM Images of Grade 2 Titanium mirror polished and etched for 30 sec in an HF/HNO3 solution: (top) at low and (bottom) at high magnification

, Appendix J: Fits of the baseline of the appendix J curves

, Lorentzian fits (red curve). The table on the graphs indicates the parameters of the Lorentzian (or Gaussian) function fitting the baseline, Color code: Gaussian fits (green curve)

, Appendix L: Comparison of the reflectance spectra obtained by a Konica Minolta CM 2500C commercial spectrophotometer (45°a:0° geometry) and by the goniospectrophotometer Optimines (45°:45° geometry) for Vibrometer, Alumina and P300 samples series anodized at cell potentials of 10V and 20V