M. I. Kohan, Nylon Plastics Handbook, 1995.

C. Duval, Plastiques et automobile -D'hier à aujourd'hui, pp.3590-3591, 2007.

C. Duval, Plastiques et automobile -D'aujourd'hui à demain, pp.3591-3592, 2007.

A. J. Uddin, Y. Ohkoshi, Y. Gotoh, M. Nagura, R. Endo et al., Melt Spinning and Laser-Heated Drawing of a New Semiaromatic Polyamide, PA9-T Fiber, Journal of Polymer Science Part B: Polymer Physics, vol.42, pp.433-444, 2004.

C. Leboeuf and D. A. Harbourne, Synthesis of semi-crystalline polyphthalamides through reactive extrusion of hexamethylene terephthalamide oligomer with lower melting, semicrystalline or amorphous polyamides, 1999.

J. Brandrup, E. H. Immergut, and E. A. Grulke, Polymer Handbook, 4th Edition, 2 vols, 2003.

L. E. Govaert, T. A. Engels, M. Wendlandt, T. A. Tervoort, and U. W. Suter, Does the strain hardening modulus of glassy polymers scale with the flow stress?, Journal of Polymer Science Part B: Polymer Physics, vol.46, issue.22, pp.2475-2481, 2008.

R. N. Haward, Strain hardening of thermoplastics, Macromolecules, vol.26, issue.22, pp.5860-5869, 1993.

E. J. Kramer, Open questions in the physics of deformation of polymer glasses, Journal of Polymer Science Part B: Polymer Physics, vol.43, issue.23, pp.3369-3371, 2005.

E. M. Arruda and M. C. Boyce, Evolution of plastic anisotropy in amorphous polymers during finite straining, International Journal of Plasticity, vol.9, issue.6, pp.697-720, 1993.

D. J. Senden, J. A. Van-dommelen, and L. E. Govaert, Strain hardening and its relation to Bauschinger effects in oriented polymers, Journal of Polymer Science Part B: Polymer Physics, vol.48, issue.13, pp.1483-1494, 2010.

V. Jatin, S. Sudarkodi, and . Basu, Investigations into the origins of plastic flow and strain hardening in amorphous glassy polymers, International Journal of Plasticity, vol.56, pp.139-155, 2014.

D. J. Senden, S. Krop, J. A. Van-dommelen, and L. E. Govaert, Rate-and temperature-dependent strain hardening of polycarbonate, Journal of Polymer Science Part B: Polymer Physics, vol.50, issue.24, pp.1680-1693, 2012.

D. D. Senden, Strain hardening and anisotropy in solid polymers, Technische Universiteit Eindhoven, 2013.

R. Hoy and M. Robbins, Strain hardening of polymer glasses: Effect of entanglement density, temperature, and rate, Journal of Polymer Science Part B: Polymer Physics, vol.44, pp.3487-3500, 2006.

R. Hoy and M. Robbins, Strain Hardening in Polymer Glasses: Limitations of Network Models, Physical review letters, vol.99, p.117801, 2007.

R. Hoy and M. Robbins, Strain Hardening of Polymer Glasses: Entanglements, Energetics, and Plasticity, Physical review. E, Statistical, nonlinear, and soft matter physics, vol.77, p.31801, 2008.

M. O. Robbins and R. S. Hoy, Scaling of the strain hardening modulus of glassy polymers with the flow stress, Journal of Polymer Science Part B: Polymer Physics, vol.47, issue.14, pp.1406-1411, 2009.

M. Wendlandt, T. A. Tervoort, and U. W. Suter, Strain-hardening modulus of crosslinked glassy poly(methyl methacrylate), Journal of Polymer Science Part B: Polymer Physics, vol.48, issue.13, pp.1464-1472, 2010.

C. Millot, Multi-scale characterization of deformation mechanisms of bulk polyamide 6 under tensile stretching below and above the glass transition, 2015.
URL : https://hal.archives-ouvertes.fr/tel-01207840

C. , J. M. Hiver, and A. Dahoun, Experimental characterization of deformation damage in solid polymers under tension, and its interrelation with necking, International Journal of solids and structures, vol.39, pp.3857-3872, 2002.

M. Ponçot, F. Addiego, and A. Dahoun, True intrinsic mechanical behaviour of semicrystalline and amorphous polymers: Influences of volume deformation and cavities shape, International Journal of Plasticity, vol.40, pp.126-139, 2013.

J. Kierkels and . Jules, Tailoring the mechanical properties of amorphous polymers, Technische Universiteit Eindhoven, 2006.

H. G. Van-melick, L. E. Govaert, and H. E. Meijer, On the origin of strain hardening in glassy polymers, Polymer, vol.44, issue.8, pp.2493-2502, 2003.

J. Richeton, S. Ahzi, L. Daridon, and Y. Rémond, A formulation of the cooperative model for the yield stress of amorphous polymers for a wide range of strain rates and temperatures, Polymer, vol.46, issue.16, pp.6035-6043, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00447211

A. Charvet, C. Vergelati, P. Sotta, and D. R. Long, Damage Mechanisms of Plasticized Cellulose Acetate under Tensile Deformation Studied by Ultrasmall-Angle X-ray Scattering, Macromolecules, vol.52, issue.17, pp.6613-6632, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02347637

R. N. Haward, Strain hardening of thermoplastics, Macromolecules, vol.26, issue.22, pp.5860-5869, 1993.

E. M. Arruda and M. C. Boyce, Evolution of plastic anisotropy in amorphous polymers during finite straining, International Journal of Plasticity, vol.9, issue.6, pp.697-720, 1993.

H. E. Meijer and L. E. Govaert, Mechanical performance of polymer systems: the relation between structure and properties, Progress in Polymer Science, vol.30, pp.915-938, 2005.

L. E. Govaert and T. A. Tervoort, Strain hardening of polycarbonate in the glassy state: Influence of temperature and molecular weight, Journal of Polymer Science Part B: Polymer Physics, vol.42, issue.11, pp.2041-2049, 2004.

G. H. Michler, Electron microscopic investigations of the structure of crazes in polystyrene, Colloid & Polymer Science, vol.263, issue.6, pp.462-474, 1985.

G. H. Michler, Crazes in amorphous polymers I. Variety of the structure of crazes and classification of different types of crazes, Colloid & Polymer Science, vol.267, issue.5, pp.377-388, 1989.

G. H. Michler, Correlation between craze formation and mechanical behaviour of amorphous polymers, Journal of Materials Science, vol.25, issue.5, pp.2321-2334, 1990.

M. C. García-gutiérrez, G. H. Michler, S. Henning, and C. Schade, Micromechanical behavior of branched polystyrene as revealed by in situ transmission electron microscopy and microhardness, Journal of Macromolecular Science, Part B, vol.40, issue.5, pp.797-812, 2001.

G. H. Michler, Electron Microscopy of Polymers, 2008.

A. M. Donald, E. J. Kramer, and R. A. Bubeck, The entanglement network and craze micromechanics in glassy polymers, Journal of Polymer Science: Polymer Physics Edition, vol.20, issue.7, pp.1129-1141, 1982.

E. J. Kramer, Microscopic and molecular fundamentals of crazing, Crazing in Polymers, pp.1-56, 1983.

C. S. Henkee and E. J. Kramer, Crazing and shear deformation in crosslinked polystyrene, Journal of Polymer Science: Polymer Physics Edition, vol.22, issue.4, pp.721-737, 1984.

E. J. Kramer and L. L. Berger, Fundamental processes of craze growth and fracture, Crazing in Polymers, vol.2, pp.1-68, 1990.

K. Friedrich, Crazes and shear bands in semi-crystalline thermoplastics, Crazing in Polymers, pp.225-274, 1983.

A. S. Argon and M. M. Salama, Growth of crazes in glassy polymers, The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics, vol.36, issue.5, pp.1217-1234, 1977.

R. P. Kambour, A review of crazing and fracture in thermoplastics, Journal of Polymer Science: Macromolecular Reviews, vol.7, issue.1, pp.1-154, 1973.

G. I. Taylor, The instability of liquid surfaces when accelerated in a direction perpendicular to their planes. I, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, vol.201, issue.1065, pp.192-196, 1950.

J. L. Halary, F. Laupretre, and L. Monnerie, Polymer Materials: Macroscopic Properties and Molecular Interpretations, 2011.

P. J. Mills, E. J. Kramer, and H. R. Brown, Real time small-angle X-ray scattering from polystyrene crazes during fatigue, Journal of Materials Science, vol.20, issue.12, pp.4413-4420, 1985.

G. J. Salomons, M. A. Singh, T. Bardouille, W. A. Foran, and M. S. Capel, Small-angle X-ray scattering analysis of craze-fibril structures, Journal of Applied Crystallography, vol.32, issue.1, pp.71-81, 1999.

U. Lode, Development of crazes in polycarbonate, investigated by ultra small angle X-ray scattering of synchrotron radiation, Macromolecular Rapid Communications, vol.19, issue.1, pp.35-39, 1998.

H. R. Brown, Y. Sindoni, E. J. Kramer, and P. J. Mills, Diffraction studies of craze structure, Polymer Engineering and Science, vol.24, issue.10, pp.825-832, 1984.

G. Stoclet, J. M. Lefebvre, R. Séguéla, and C. Vanmansart, In-situ SAXS study of the plastic deformation behavior of polylactide upon cold-drawing, Polymer, vol.55, issue.7, pp.1817-1828, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01808076

E. Mourglia-seignobos, D. R. Long, L. Odoni, L. Vanel, P. Sotta et al., Physical Mechanisms of Fatigue in Neat Polyamide, vol.6, issue.12, pp.3880-3894, 2014.

, ASTM D5336 -15a Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Material, 2015.

B. Guérin, Polyamides PA, Techniques de l'ingénieur Matières thermoplastiques : monographies, 1994.

C. Duval, Plastiques et automobile -D'aujourd'hui à demain, pp.3591-3592, 2007.

T. F. Novitsky, C. A. Lange, L. J. Mathias, S. Osborn, R. Ayotte et al., Eutectic melting behavior of polyamide 10, Polymer, vol.12, issue.6, pp.2417-2425, 2010.

T. Cousin, Synthesis and molecular modelling of bio-based polyamides, 2013.
URL : https://hal.archives-ouvertes.fr/tel-00952848

S. Vouyiouka, E. Karakatsani, and C. Papaspyrides, Solid State Polymerization, Progress in Polymer Science, vol.36, pp.10-37, 2005.
URL : https://hal.archives-ouvertes.fr/hal-02276413

M. Li, J. Bijleveld, and T. Dingemans, Synthesis and Properties of Semi-crystalline Poly(decamethylene terephthalamide) Thermosets from Reactive Side-group Copolyamides, European Polymer Journal, vol.98, 2017.

H. K. Reimschuessel and G. J. Dege, Polyamides: Decarboxylation and desamination in nylon 6 equilibrium polymer, Journal of Polymer Science Part A-1: Polymer Chemistry, vol.8, issue.11, pp.3265-3283, 1970.

J. Trotignon, Précis matières plastiques : structures-propriétés, mise en oeuvre, normalisation, 2006.

, ISO 16396-2 Plastics -Polyamide (PA) moulding and extrusion materials, ISO International Organization for Standardization, 2017.

K. Chen and K. S. Schweizer, Theory of Yielding, Strain Softening, and Steady Plastic Flow in Polymer Glasses under Constant Strain Rate Deformation, Macromolecules, vol.44, issue.10, pp.3988-4000, 2011.

L. C. Van-breemen, T. A. Engels, E. T. Klompen, D. J. Senden, and L. E. Govaert, Rate-and temperature-dependent strain softening in solid polymers, Journal of Polymer Science Part B: Polymer Physics, vol.50, issue.24, pp.1757-1771, 2012.

M. Wendlandt, T. A. Tervoort, and U. W. Suter, Non-linear, rate-dependent strainhardening behavior of polymer glasses, Polymer, vol.46, issue.25, pp.11786-11797, 2005.

T. A. Tervoort and L. E. Govaert, Craze-initiation kinetics in polystyrene, Journal of Polymer Science Part B: Polymer Physics, vol.42, issue.11, pp.2066-2073, 2004.

Y. Xu, T. Gao, J. Wang, and W. Zhang, Experimentation and Modeling of the Tension Behavior of Polycarbonate at High Strain Rates, Polymers (Basel), vol.8, issue.3, p.63, 2016.

C. Sell, J. M. Hiver, A. Dahoun, and A. Souahi, Video-controlled tensile testing of polymers and metals beyond the necking point, Journal of Materials Science, vol.27, issue.18, pp.5031-5039, 1992.

J. Sweeney, P. Caton-rose, R. Spares, and P. D. Coates, Unified model of necking and shear banding in amorphous and semicrystalline polymers, Journal of Applied Polymer Science, vol.106, issue.2, pp.1095-1105, 2007.

J. Ye, S. André, and L. Farge, Kinematic study of necking in a semi-crystalline polymer through 3D Digital Image Correlation, International Journal of Solids and Structures, vol.59, pp.58-72, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01417908

J. L. Halary, F. Lauprêtre, and L. Monnerie, Mécanique des matériaux polymères. Belin, 2008.

S. D. Poisson, Note sur l'extension des fils et des plaques élastiques, Annales de Chimie et de Physique, 1827, vol.36, pp.384-387

G. N. Greaves, A. L. Greer, R. S. Lakes, and T. Rouxel, Poisson's ratio and modern materials, Nature Materials, vol.10, p.823, 2011.

S. Jazouli, W. Luo, F. Brémand, and T. Vu-khanh, Nonlinear creep behavior of viscoelastic polycarbonate, Journal of Materials Science, vol.41, issue.2, pp.531-536, 2006.

A. Bocahut, J. Delannoy, D. R. Long, and P. Sotta, Modeling Molecular Relaxation Mechanisms in Amorphous Polymers: Application to Polyamides, Macromolecules, vol.49, issue.5, 1918.

L. P. Chen, A. F. Yee, and E. J. Moskala, The Molecular Basis for the Relationship between the Secondary Relaxation and Mechanical Properties of a Series of Polyester Copolymer Glasses, Macromolecules, vol.32, issue.18, pp.5944-5955, 1999.

A. Rios-de-anda, Influence of the solvent sorption, additivation, and chemical modification on the molecular mobility dynamics of Polyamide 6,6 amorphous phase and its consequences on the tensile and impact strength properties of this polymer, 2012.
URL : https://hal.archives-ouvertes.fr/tel-00933978

K. J. Laidler, A glossary of terms used in chemical kinetics, including reaction dynamics (IUPAC Recommendations 1996), Pure and applied chemistry, vol.68, issue.1, pp.149-192, 1996.

M. L. Williams, R. F. Landel, and J. D. Ferry, The Temperature Dependence of Relaxation Mechanisms in Amorphous Polymers and Other Glass-forming Liquids, J. Am. Chem. Soc, vol.77, issue.14, pp.3701-3707, 1955.

F. Beaume, B. Brulé, J. Halary, F. Lauprêtre, and L. Monnerie, Secondary transitions of aryl-aliphatic polyamides IV. Dynamic mechanical analysis, Polymer, vol.41, issue.14, pp.752-753, 2000.

E. Laredo and M. Hernández, Moisture effect on the low-and high-temperature dielectric relaxations in nylon-6, Journal of Polymer Science Part B-polymer Physics -J POLYM SCI B-POLYM PHYS, vol.35, pp.2879-2888, 1997.

E. Laredo, M. Grimau, F. Sánchez, and A. Bello, Water Absorption Effect on the Dynamic Properties of Nylon-6 by Dielectric Spectroscopy, Macromolecules, vol.36, issue.26, pp.9840-9850, 2003.

M. Laurati, Dynamics of Water Absorbed in Polyamides, Macromolecules, vol.45, issue.3, pp.1676-1687, 2012.

F. Beaume, F. Lauprêtre, L. Monnerie, A. Maxwell, and G. R. Davies, Secondary transitions of aryl-aliphatic polyamides. I. Broadband dielectric investigation, Polymer, vol.41, issue.7, pp.437-438, 2000.

F. Kremer and A. Schönhals, Broadband Dielectric Spectroscopy, 2003.

J. Varlet, J. Y. Cavaillé, J. Perez, and G. P. Johari, Dynamic mechanical spectrometry of nylon-12, Journal of Polymer Science Part B: Polymer Physics, vol.28, issue.13, pp.2691-2705, 1990.

F. M. Preda, Dynamics of polyamide in the solid state in presence of solvents and in the molten state, 2016.
URL : https://hal.archives-ouvertes.fr/tel-01357911

P. B. Bowden and R. J. Young, Deformation mechanisms in crystalline polymers, Journal of Materials Science, vol.9, issue.12, pp.2034-2051, 1974.

J. M. Haudin, C. , and G. Sell, Mécanismes microscopiques de déformation des polymères semi-cristallins, pp.251-273, 1995.

J. Petermann and J. M. Schultz, Lamellar separation during the deformation of highdensity polyethylene, Journal of Materials Science, vol.13, issue.1, pp.50-54, 1978.

S. Castagnet, J. Gacougnolle, and P. Dang, Correlation between macroscopical viscoelastic behaviour and micromechanisms in strained ? polyvinylidene fluoride (PVDF), Materials Science and Engineering: A, vol.276, issue.1, pp.152-159, 2000.

A. Galeski, Strength and toughness of crystalline polymer systems, Progress in Polymer Science, vol.28, issue.12, pp.1643-1699, 2003.

S. Castagnet, S. Girault, J. L. Gacougnolle, and P. Dang, Cavitation in strained polyvinylidene fluoride: mechanical and X-ray experimental studies, Polymer, vol.41, issue.20, pp.7523-7530, 2000.

M. Lafarge, Modélisation couplée comportement-endommagement et critères de rupture dans le domaine de la transition du PVDF, 2004.

A. Pawlak and A. Galeski, Plastic Deformation of Crystalline Polymers: The Role of Cavitation and Crystal Plasticity, Macromolecules, vol.38, issue.23, pp.9688-9697, 2005.

V. S. Kuksenko and V. P. Tamusz, Fracture Micromechanics of Polymer Materials, 1981.

A. Galeski, A. S. Argon, and R. E. Cohen, Changes in the morphology of bulk spherulitic nylon 6 due to plastic deformation, Macromolecules, vol.21, issue.9, pp.2761-2770, 1988.

A. Pawlak and E. Piorkowska, Effect of negative pressure on melting behavior of spherulites in thin films of several crystalline polymers, Journal of Applied Polymer Science, vol.74, issue.6, pp.1380-1385, 1999.

S. Castagnet, Comportement mécanique du PVDF : compétition entre cavitation et écoulement visqueux, 1998.

W. Wu and A. P. Turner, Shear bands in polycarbonate, Journal of Polymer Science: Polymer Physics Edition, vol.11, issue.11, pp.2199-2208, 1973.

L. C. Sawyer, D. Grubb, and G. Meyers, Polymer microscopy: Third edition, pp.1-540, 2008.

S. Raha and P. B. Bowden, Birefringence of plastically deformed poly(methyl methacrylate), Polymer, vol.13, issue.4, pp.174-183, 1972.

P. D. Wu and E. Van-der-giessen, Analysis of shear band propagation in amorphous glassy polymers, International Journal of Solids and Structures, vol.31, issue.11, pp.90011-90017, 1994.

R. Quinson, J. Perez, M. Rink, and A. Pavan, Yield criteria for amorphous glassy polymers, Journal of Materials Science, vol.32, issue.5, pp.1371-1379, 1997.

C. C. Chau and J. C. Li, Intersections of coarse shear bands in polystyrene, Journal of Materials Science, vol.14, issue.9, pp.2172-2182, 1979.

L. Josserand, R. Schirrer, and P. Davies, Influence of water on crack propagation in poly methyl methacrylate: craze stress and craze fibril lifetime, Journal of Materials Science, vol.30, issue.7, pp.1772-1780, 1995.

L. L. Berger, D. J. Buckley, E. J. Kramer, H. R. Brown, and R. A. Bubeck, Low-angle electron diffraction from high temperature polystyrene crazes, Journal of Polymer Science Part B: Polymer Physics, vol.25, issue.8, pp.1679-1697, 1987.

M. G. Tijssens, E. Van-der-giessen, and L. J. Sluys, Modeling of crazing using a cohesive surface methodology, Mechanics of Materials, vol.32, pp.19-35, 2000.

H. Yang, H. C. , B. B. , and E. J. Kramer, Polym. Commun, vol.27, p.132, 1986.

G. H. Michler, In-situ Deformation of Polymers in the HVEM, Kristall und Technik, vol.14, issue.11, pp.1357-1363, 1979.

H. R. Brown and E. J. Kramer, Effect of surface tension on the stress in environmental crazes, Polymer, vol.22, issue.5, pp.90362-90363, 1981.

B. J. Jansen, S. Rastogi, H. E. Meijer, and P. J. Lemstra, Rubber-Modified Glassy Amorphous Polymers Prepared via Chemically Induced Phase Separation. 2. Mode of Microscopic Deformation Studied by in-Situ Small-Angle X-ray Scattering during Tensile Deformation, Macromolecules, vol.34, issue.12, pp.4007-4018, 2001.

S. Polizzi and F. Spinozzi, Small Angle X-Ray Scattering (SAXS) with Synchrotron Radiation Sources, Synchrotron Radiation: Basics, pp.337-359, 2015.

E. Donth and G. H. Michler, Discussion of craze formation and growth in amorphous polymers in terms of the multiplicity of glass transition at low temperatures, Colloid & Polymer Science, vol.267, issue.7, pp.557-567, 1989.

C. B. Bucknall, Rubber toughening, The Physics of Glassy Polymers, pp.363-412, 1997.

D. Dompas, G. Groeninckx, M. Isogawa, T. Hasegawa, and M. Kadokura, Toughening behaviour of rubber-modified thermoplastic polymers involving very small rubber particles: 3. Impact mechanical behaviour of poly(rmvinyl chloride)/methyl methacrylate-butadienestyrene graft copolymer blends, Polymer, vol.35, issue.22, pp.90729-90732, 1994.

C. J. Plummer and A. M. Donald, Craze fibril breakdown in glassy polymers, Polymer, vol.32, issue.3, p.90443, 1991.

H. H. Kausch, Polymer fracture, 1978.

C. Fond, A. Lobbrecht, and R. Schirrer, Polymers toughened with rubber microspheres: an analytical solution for stresses and strains in the rubber particles at equilibrium and rupture, International Journal of Fracture, vol.77, issue.2, pp.141-159, 1996.

A. S. Argon and J. G. Hannoosh, Initiation of crazes in polystyrene, The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics, vol.36, issue.5, pp.1195-1216, 1977.

F. Addiego, Caractérisation de la variation volumique du polyethylène au cours de la deformation plastique en traction et en fluage, 2006.

M. Poncot, Comportement thermomecaniques de polymeres charges selon differents chemins de deformation et traitements thermiques, 2009.

A. Charvet, Study of mechanical properties and damage mechanisms in plasticized cellulose acetate polymers, 2019.
URL : https://hal.archives-ouvertes.fr/tel-02165223

C. Fusco, L. Vanel, and D. R. Long, Long-time damage under creep experiments in disordered materials: Transition from exponential to logarithmic fracture dynamics, The European Physical Journal E, vol.36, issue.4, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01727361

J. G. Dolden, Structure-property relationships in amorphous polyamides, vol.17, pp.875-892, 1976.

A. R. Martins, A. Bocahut, M. Michon, and P. Sotta, Effect of intermolecular interactions on the viscoelastic behavior of unentangled polyamide melts, Journal of Rheology, vol.63, issue.3, pp.377-389, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02350620

P. J. Flory, Principles of Polymer Chemistry, 1953.

H. Rolland, N. Saintier, P. Wilson, J. Merzeau, and G. Robert, In situ X-ray tomography investigation on damage mechanisms in short glass fibre reinforced thermoplastics: Effects of fibre orientation and relative humidity, Composites Part B: Engineering, vol.109, pp.170-186, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02353859

T. B. Van-erp, L. E. Govaert, and G. W. Peters, Mechanical Performance of Injection-Molded Poly(propylene): Characterization and Modeling, Macromolecular Materials and Engineering, vol.298, issue.3, pp.348-358, 2013.

E. Mourglia-seignobos, Compréhension des mécanismes physiques de fatigue dans le polyamide vierge et renforcé de fibres de verre, 2009.

M. R. Kantz, H. D. Newman, and F. H. Stigale, The skin-core morphology and structure-property relationships in injection-molded polypropylene, Journal of Applied Polymer Science, vol.16, issue.5, pp.1249-1260, 1972.

D. P. Russell and P. W. Beaumont, Structure and properties of injection-moulded nylon-6, Journal of Materials Science, vol.15, issue.1, pp.216-221, 1980.

S. Apichartpattanasiri, J. N. Hay, and S. N. Kukureka, A study of the tribological behaviour of polyamide 66 with varying injection-moulding parameters, Wear, vol.251, issue.1, pp.1557-1566, 2001.

A. Maurel-pantel, E. Baquet, J. Bikard, J. L. Bouvard, and N. Billon, A thermomechanical large deformation constitutive model for polymers based on material network description: Application to a semi-crystalline polyamide 66, International Journal of Plasticity, vol.67, pp.102-126, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01083213

N. Hussein, Enhancement of the mechanical performance of semi-crystalline polyamides by tailoring the intermolecular interaction in the amorphous phase, 2013.
URL : https://hal.archives-ouvertes.fr/tel-01077948

J. H. Hubbell and S. M. Seltzer, NIST: X-Ray Mass Attenuation Coefficients. Radiation Physics Division, PML, NIST, 2004.

A. R. Martins, Effect of intermolecular interactions on the viscoelastic behavior of polyamides, 2019.
URL : https://hal.archives-ouvertes.fr/tel-02168672

D. E. Packham, Surface energy, surface topography and adhesion, International Journal of Adhesion and Adhesives, vol.23, issue.6, pp.437-448, 2003.

T. Young, III. An essay on the cohesion of fluids, Philosophical Transactions of the Royal Society of London, vol.95, pp.65-87, 1805.
URL : https://hal.archives-ouvertes.fr/hal-02404867

M. E. Schrader, Contact Angle and Vapor Adsorption, Langmuir, vol.12, issue.15, pp.3728-3732, 1996.

J. Muller, Etude des changements de phase de polymère dans le procédé de rotomoulage : coalescence et cristallisation couplées à la thermique du procédé, 2008.

N. T. Correia, J. J. Ramos, B. J. Saramago, and J. C. Calado, Estimation of the Surface Tension of a Solid: Application to a Liquid Crystalline Polymer, Journal of Colloid and Interface Science, vol.189, issue.2, pp.361-369, 1997.

F. M. Fowkes, ATTRACTIVE FORCES AT INTERFACES, Ind. Eng. Chem, vol.56, issue.12, pp.40-52, 1964.

D. K. Owens and R. C. Wendt, Estimation of the surface free energy of polymers, Journal of Applied Polymer Science, vol.13, issue.8, pp.1741-1747, 1969.

J. H. Clint, Adhesion and components of solid surface energies, Current Opinion in Colloid & Interface Science, vol.6, issue.1, pp.28-33, 2001.

J. Clint and A. Wicks, Adhesion under water: Surface energy considerations, International Journal of Adhesion and Adhesives, vol.21, pp.267-273, 2001.

S. Wu, Polymer interface and adhesion, vol.188, 1982.

B. Ja?czuk, W. Wójcik, and A. Zdziennicka, Determination of the Components of the Surface Tension of Some Liquids from Interfacial Liquid-Liquid Tension Measurements, Journal of Colloid and Interface Science, vol.157, issue.2, pp.384-393, 1993.

, RSA-G2 solids analyzer, 2014.

J. D. Ferry, Viscoelastic Properties of Polymers, 1980.

. Nikon, MicroscopyU. Introduction to Polarized Light Microscopy. Polarized Light Microscopy Configuration, 2015.

C. M. Sorensen, C. Oh, P. W. Schmidt, and T. P. Rieker, Scaling description of the structure factor of fractal soot composites, Phys. Rev. E, vol.58, issue.4, pp.4666-4672, 1998.

A. Guinier and G. Fournet, Small Angle Scattering of X-Rays, 1955.

G. Beaucage, H. K. Kammler, and S. E. Pratsinis, Particle size distributions from smallangle scattering using global scattering functions, Journal of Applied Crystallography, vol.37, issue.4, pp.523-535, 2004.

M. Abramowitz, I. A. Stegun, and R. H. Romer, Handbook of Mathematical Functions with Formulas, Graphs, and Mathematical Tables, American Journal of Physics, vol.56, issue.10, pp.958-958, 1988.

M. Sztucki and T. Narayanan, Development of an ultra-small-angle X-ray scattering instrument for probing the microstructure and the dynamics of soft matter, Journal of Applied Crystallography -J APPL CRYST, vol.40, 2006.

A. Siciliano, D. Severgnini, A. Seves, T. Pedrelli, and L. Vicini, Thermal and mechanical behavior of polyamide 6/polyamide 6I/6T blends, Journal of Applied Polymer Science, vol.60, issue.10, pp.1757-1764, 1996.

T. Cousin, J. Galy, and J. Dupuy, Molecular modelling of polyphthalamides thermal properties: Comparison between modelling and experimental results, Polymer, vol.53, pp.3203-3210, 2012.

J. E. Mark, Polymer Data Handbook, 1999.

Y. Park, J. Ko, T. Ahn, and S. Choe, Moisture effects on the glass transition and the low temperature relaxations in semiaromatic polyamides, Journal of Polymer Science Part B: Polymer Physics, vol.35, issue.5, pp.807-815, 1997.

Y. Shangguan, F. Chen, E. Jia, Y. Lin, J. Hu et al., New Insight into Time-Temperature Correlation for Polymer Relaxations Ranging from Secondary Relaxation to Terminal Flow: Application of a Universal and Developed WLF Equation, Polymers (Basel), vol.9, issue.11, p.567, 2017.

H. W. Starkweather and J. R. Barkley, The effect of water on the secondary dielectric relaxations in nylon 66, Journal of Polymer Science: Polymer Physics Edition, vol.19, pp.1211-1220, 1981.

A. Beneduci, Which is the effective time scale of the fast Debye relaxation process in water?, Journal of Molecular Liquids, vol.138, issue.1, pp.55-60, 2008.

G. D. Smith and R. L. Jaffe, Quantum Chemistry Study of Conformational Energies and Rotational Energy Barriers in n-Alkanes, J. Phys. Chem, vol.100, issue.48, pp.18718-18724, 1996.

K. B. Wiberg and M. A. Murcko, Rotational barriers. 2. Energies of alkane rotamers. An examination of gauche interactions, J. Am. Chem. Soc, vol.110, issue.24, pp.8029-8038, 1988.

B. Brûlé, Université Pierre et Marie Curie, 1999.

L. Monnerie, J. Halary, and H. Kausch, Deformation, Yield and Fracture of Amorphous Polymers: Relation to the Secondary Transitions, Advances in Polymer Science, vol.187, pp.215-372, 2005.

A. Charvet, C. Vergelati, and D. R. Long, Mechanical and ultimate properties of injection molded cellulose acetate/plasticizer materials, Carbohydrate Polymers, vol.204, pp.182-189, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02413115

A. Pawlak and A. Galeski, Cavitation during Tensile Deformation of Polypropylene, Macromolecules, vol.41, issue.8, pp.2839-2851, 2008.

T. Quatravaux, S. Elkoun, C. Sell, L. Cangemi, and Y. Meimon, Experimental characterization of the volume strain of poly(vinylidene fluoride) in the region of homogeneous plastic deformation, Journal of Polymer Science Part B: Polymer Physics, vol.40, issue.22, pp.2516-2522, 2002.

F. Addiego, A. Dahoun, C. Sell, and J. M. Hiver, Volume Variation Process of High-Density Polyethylene During Tensile and Creep Tests, Oil & Gas Science and Technology -Rev. IFP, vol.61, issue.6, pp.715-724, 2006.
URL : https://hal.archives-ouvertes.fr/hal-02005892

F. Addiego, A. Dahoun, C. Sell, and J. Hiver, Characterization of volume strain at large deformation under uniaxial tension in high-density polyethylene, Polymer, vol.47, issue.12, pp.4387-4399, 2006.

S. Pandini and A. Pegoretti, Time and temperature effects on Poisson's ratio of poly(butylene terephthalate), Express Polymer Letters, vol.5, pp.685-697, 2011.

B. S. Thakkar and L. J. Broutman, The influence of residual stresses and orientation on the properties of amorphous polymers, Polymer Engineering & Science, vol.20, issue.18, pp.1214-1219, 1980.

F. F. Rawson and J. G. Rider, A correlation of Young's modulus with yield stress in oriented poly(vinyl chloride), Polymer, vol.15, issue.2, pp.107-110, 1974.

R. N. Haward, Strain hardening of high density polyethylene, Journal of Polymer Science Part B: Polymer Physics, vol.45, issue.9, pp.1090-1099, 2007.

T. A. Engels, L. E. Govaert, and H. E. Meijer, The Influence of Molecular Orientation on the Yield and Post Yield Response of Injection Molded Polycarbonate, Macromolecular Materials and Engineering, vol.294, pp.821-828, 2009.

J. Richeton, S. Ahzi, K. S. Vecchio, F. C. Jiang, and A. Makradi, Modeling and validation of the large deformation inelastic response of amorphous polymers over a wide range of temperatures and strain rates, International Journal of Solids and Structures, vol.44, issue.24, pp.7938-7954, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00322014

B. A. Schrauwen, R. P. Janssen, L. E. Govaert, and H. E. Meijer, Intrinsic Deformation Behavior of Semicrystalline Polymers, Macromolecules, vol.37, issue.16, pp.6069-6078, 2004.

K. A. Vijayalakshmi, C. P. Yoganand, and K. Pandiyaraj, Studies on Modification of Surface Properties in Polycarbonate (PC) Film Induced by DC Glow Discharge Plasma, International Journal of Polymer Science, 2011.

C. Ozcan and N. Hasirci, Evaluation of surface free energy for PMMA films, Journal of Applied Polymer Science, vol.108, issue.1, pp.438-446, 2008.

J. C. Arnold, 6.06 -Environmental Effects on Crack Growth in Polymers, Comprehensive Structural Integrity, pp.281-319, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00906406

W. A. Zisman, Relation of the Equilibrium Contact Angle to Liquid and Solid Constitution, Contact Angle, Wettability, and Adhesion, vol.43, pp.1-51, 1964.

L. E. Govaert, T. A. Engels, E. T. Klompen, G. W. Peters, and H. E. Meijer, Processing-induced Properties in Glassy Polymers, IPP, vol.20, issue.2, pp.170-177, 2005.

N. E. Zafeiropoulos, R. J. Davies, K. Schneider, M. Burghammer, C. Riekel et al., The Relationship between Craze Structure and Molecular Weight in Polystyrene as Revealed by ?SAXS Experiments, Macromolecular Rapid Communications, vol.27, issue.19, pp.1689-1694, 2006.

C. Bridle, A. Buckley, and J. Scanlan, Mechanical anisotropy of oriented polymers, Journal of Materials Science, vol.3, issue.6, pp.622-628, 1968.

L. D. Landau and E. M. Lifshitz, CHAPTER XV -SURFACES, Statistical Physics, pp.517-537, 1980.

J. C. Fisher, The Fracture of Liquids, Journal of Applied Physics, vol.19, issue.11, pp.1062-1067, 1948.

C. Roth, J. Pye, and R. Baglay, Correlating glass transition and physical aging in thin polymer films, pp.181-204, 2016.

R. R. Baglay and C. B. Roth, Communication: Experimentally determined profile of local glass transition temperature across a glassy-rubbery polymer interface with a Tg difference of 80 K, The Journal of Chemical Physics, vol.143, issue.11, p.111101, 2015.

R. R. Baglay and C. B. Roth, Local glass transition temperature Tg(z) of polystyrene next to different polymers: Hard vs. soft confinement, The Journal of Chemical Physics, vol.146, issue.20, p.203307, 2017.

A. Argon, A Theory for the Low-Temperature Plastic Deformation of Glassy Polymers, Philosophical Magazine A-physics of Condensed Matter Structure Defects and Mechanical Properties -PHIL MAG A, vol.28, pp.839-865, 1973.

A. Argon, Craze initiation in glassy polymers -Revisited, Polymer, vol.52, pp.2319-2327, 2011.

P. G. De-gennes, Wetting: statics and dynamics, Rev. Mod. Phys, vol.57, issue.3, pp.827-863, 1985.

R. J. Fields and M. F. Ashby, Finger-like crack growth in solids and liquids, Philosophical Magazine, vol.33, issue.1, pp.33-48, 1976.

A. M. Donald, Crazing, The Physics of Glassy Polymers, pp.295-341, 1997.

A. S. Argon and M. I. Bessonov, Plastic flow in glassy polymers, Polymer Engineering & Science, vol.17, issue.3, pp.174-182, 1977.

N. Hussein, D. Long, L. Fillot, and L. Trouillet-fonti, Aliphatic/semi-aromatic block copolyamide, vol.9688823, 2017.

L. Fillot, S. Jeol, D. Long, and N. Hussein, Method for increasing fatigue resistance of polyamides, 2014.