, Annexe 1 : Réglages donnant la meilleure valeur du PQ *

*. ,

, PQ !3*

A. E. Abbas, L. Yang, R. Zapata, and T. L. Schmitz, Application of decision analysis to milling profit maximisation : an introduction, Systems Engineering, vol.35, pp.64-88, 2009.

. Afnor-nf-e, Couple Outil-Matière : Domaine de Fonctionnement des Outils Coupants, 1994.

R. Agrawal, S. Shukla, S. Kumar, and M. Tiwari, Multi-agent system for distributed computer-aided process planning problem in e-manufacturing environment, International Journal of Advanced Manufacturing Technology, vol.44, issue.5-6, pp.579-594, 2009.

. Airbus, Global Market Forecast, 2014.

F. Aissanou, Décisions multicritères dans les réseaux de télécommunications autonome, 2014.

M. Alberti, J. Ciurana, and M. Casadesús, A system for optimising cutting parameters when planning milling operations in high-speed machining, Journal of Materials Processing Technology, vol.168, issue.1, pp.25-35, 2005.

A. T. Almeida, Multicriteria modelling of repair contract based on utility and ELECTRE I method with dependability and service quality criteria, Annals of Operations Research, vol.138, issue.1, pp.113-126, 2005.

L. Alting and H. Zhang, Computer Aided Process Planning : the state of the art survey, International Journal of Production Research, 1989.

Y. Altintas and S. Tulsyan, Prediction of part machining cycle times via virtual CNC, CIRP Annals -Manufacturing Technology, vol.64, issue.1, pp.361-364, 2015.

B. Anselmetti, Génération automatique de gammes de tournage et contribution à la gestion d'une cellule de production. Habilitation à diriger des recherches, 1994.

A. Antomarchi, Développement d'un outil d'aide à la décision pour le choix de gamme de fabrication optimale en présence de données incertaines, 2016.

D. Arbis, V. V. Dixit, and T. H. Rashidi, Impact of risk attitudes and perception on game theoretic driving interactions and safety, Accident Analysis & Prevention, vol.94, pp.135-142, 2016.

B. Arezoo, K. Ridgway, and A. Al-ahmari, Selection of cutting tools and conditions of machining operations using an expert system, Computers in Industry, vol.42, issue.1, pp.51-53, 2000.

K. J. Arrow and H. Raynaud, Social choice and multicriterion decision-making, 1986.

T. Back, D. B. Fogel, and Z. Michalewicz, Handbook of evolutionary computation, 1997.

C. A. Bana-e-costa, L. Ensslin, É. C. Cornêa, and J. Vansnick, Decision Support Systems in action: Integrated application in a multicriteria decision aid process, European Journal of Operational Research, vol.113, issue.2, pp.219-226, 1999.

O. Ben-ammar, Planification des réapprovisionnements sous incertitudes pour lessys emes d'assemblagè a plusieurs niveaux, 2014.

S. Benmena, Introduction aux méthodes multicritères d'aide à la décision, Biotechnology, Agronomy and Society and Environment, vol.4, issue.2, pp.83-93, 2000.

K. S. Bhutta and F. Huq, Supplier selection problem : a comparison of the total cost of ownership and analytic herarchy process approaches. Supply Chain Management, An International Journal, vol.7, issue.3, pp.126-135, 2002.

H. Bley and V. Stadelmeyer, Flexible Interface Between a Data Base Management System and a Decision Support-System for Tool Selection, 25th CIRP International Seminaron Manufacturing Systems, pp.333-345, 1993.

. Boeing, Boeing Aero Magazine, 2006.

J. Borda, Memoire sur les élections au scrutin, pp.657-664, 1781.

D. Bouyssou, Building Criteria : A Prerequisite For MCDA, Readings in multiple criteria decision aid, pp.59-80, 1990.

D. Bouyssou, D. Dubois, M. Pirlot, and H. Prade, Concepts et Méthodes pour l'aide à la décision -analyse multicritère, vol.3, 2006.

D. Bouyssou, D. Dubois, M. Pirlot, and H. Prade, Concepts et Méthodes pour l'aide à la décision -outils de modélisation, 2006.

D. Bouyssou, T. Marchant, and P. Perny, Théorie du choix social et aide multicritère à la décision, Concepts et méthodes pour l'aide à la décision, vol.3, 2005.

D. Bouyssou, T. Marchant, M. Pirlot, A. Tsoukiàs, and P. Vincke, Evaluation and decision models with multiple criteria : Stepping stones for the analyst, 2006.

D. Bouyssou, P. Perny, M. Pirlot, A. Tsoukiàs, and P. Vincke, A Manifesto for the new MCDA era, Journal of Multi Criteria Decision Analysis, vol.2, issue.3, pp.125-127, 1993.

J. P. Brans, P. Vincke, and B. Mareschal, How to select and how to rank projects: The Promethee method, European Journal of Operational Research, vol.24, issue.2, pp.228-238, 1986.

G. Campatelli, A. Scippa, and L. Lorenzini, Workpiece orientation and tooling selection to reduce the environmental impact of milling operations, Procedia CIRP, vol.14, pp.575-580, 2014.

H. Chanal, E. Duc, and P. Ray, A study of the impact of machine tool structure on machining processes, International Journal of Machine Tools and Manufacture, vol.46, issue.2, pp.98-106, 2006.

T. Chang, Expert process planning for manufacturing, 1990.

S. J. Chen, S. Hinduja, and G. Barrow, Automatic tool selection for rough turning operations, International Journal of Machine Tools and Manufacture, vol.29, issue.4, pp.90070-90079, 1989.

Y. Chen, A. Hui, and R. Du, A fuzzy expert system for the design of machining operations, International Journal of Machine Tools and Manufacture, vol.35, issue.12, pp.1605-1621, 1995.

I. A. Choudhury and M. A. El-baradie, Machinability assessment of inconel 718 by factorial design of experiment coupled with response surface methodology, Journal of Materials Processing Technology, vol.95, issue.1-3, pp.30-39, 1999.

P. Conradie, D. Dimitrov, and G. Oosthuizen, A Cost Modelling Approach for Milling Titanium Alloys, Procedia CIRP, vol.46, pp.412-415, 2016.

C. A. Costa, Les problématiques de l ' aide à la décision : vers l'enrichissement de la trilogie choix-trirangement, Recherche opérationnelle/Opérations Research, vol.30, issue.2, pp.191-216, 1996.

D. M. D'addona and R. Teti, Genetic algorithm-based optimization of cutting parameters in turning processes, Procedia CIRP, vol.7, pp.323-328, 2013.

R. M. D'souza, C. Sequin, and P. K. Wright, Automated tool sequence selection for 3-axis machining of free-form pockets, CAD Computer Aided Design, vol.36, issue.7, pp.595-605, 2004.

M. J. De-condorcet, Essai sur l'application de l'analyse à la probabilité des décisions rendues à la pluralité des voix, Imprimerie Royale, 1785.

B. Denkena, M. Shpitalni, P. Kowalski, G. Molcho, and Y. Zipori, Knowledge management in process planning, CIRP Annals -Manufacturing Technology, vol.56, issue.1, pp.175-180, 2007.

P. Dépincé and J. Y. Hascoët, Active integration of tool deflection effects in end milling. Part 1. Prediction of milled surfaces, International Journal of Machine Tools and Manufacture, vol.46, issue.9, pp.937-344, 2006.

,

P. Dépincé and J. Y. Hascoët, Active integration of tool deflection effects in end milling. Part 2. Compensation of tool deflection, International Journal of Machine Tools and Manufacture, vol.46, issue.9, pp.945-956, 2006.

T. Dereli and I. H. Filiz, Optimisation of process planning functions by genetic algorithms, Computers and Industrial Engineering, vol.36, issue.2, pp.133-136, 1999.

S. Dhage and J. M. Usher, Computer-aided tool selection for turning and boring, Computers and Industrial Engineering, vol.25, issue.1-4, pp.207-210, 1993.

J. J. Droesbeke, G. Saporta, and J. Fine, Plans d'expériences : Applications à l'entreprise, 1997.

W. Edwards, Proceedings of a symposium : Decision and Risk Analysis -Powerful new tools for management, 1971.

H. A. Elmaraghy, Evolution and Future Perspectives of CAPP, CIRP Annals -Manufacturing Technology, vol.42, issue.2, pp.739-751, 1993.

H. Eskicioglu and B. J. Davies, An interactive process planning system for prismatic parts (ICAPP), International Journal of Machine Tool Design and Research, vol.21, issue.3-4, pp.193-206, 1981.

W. Eversheim, H. Fucks, and K. H. Zons, Automated Process Planning with Regard to Production by Application of the System AUTAP for Control Problems, 12th CIRP international seminar on Manufacturing Systems, 1980.

W. Eversheim and J. Schneewind, Computer-aided process planning-State of the art and future development, Robotics and Computer-Integrated Manufacturing, vol.10, issue.1-2, pp.65-70, 1993.

R. Faure, B. Lemaire, and C. Picouleau, Précis de recherche opérationnelle -7e éd, Méthodes et exercices d'application. Dunod, 2014.

P. C. Fishburn, Utility Theory for Decision Making, 1970.

A. Fujimoto and H. Takahashi, Flexible modulation of risk attitude during decision-making under quota, NeuroImage, vol.139, pp.304-312, 2016.

L. R. Gardiner and R. E. Steuer, Unified interactive multiple objective programming : an open architecture for accommodating new procedures, Journal of Operation Research Society, vol.45, issue.12, pp.1456-1466, 1994.

F. Giusti, M. Santochi, and G. Dini, COATS: an Expert Module for Optimal Tool Selection, CIRP Annals -Manufacturing Technology, vol.35, issue.1, pp.61901-61906, 1986.

S. Gouda and K. Taraman, CAPP : PAST, Present and Future. Society of Manufacturing Engineers, 1989.

D. E. Grierson, Pareto multi-criteria decision making, Advanced Engineering Informatics, vol.22, issue.3, pp.371-384, 2008.

A. Guitouni, J. Martel, and P. Vincke, Un cadre de référence pour le choix d'une procédure d'agrégation multicritère, 1999.

I. Ham and S. C. Lu, Computer-Aided Process Planning : The present and the future, CIRP Annals -Manufacturing Technology, vol.37, issue.2, pp.591-601, 1988.

A. Hammami, Modélisation technico-économique d'une chaîne logistique dans une entreprise réseau, 2013.

R. F. Harik, Spécifications de fonctions pour un système d'aide à la génération automatique de gamme d'usinage : Application aux pièces aéronautiques de structure, prototype logiciel dans le cadre du projet RNTL USIQUICK, p.178, 2007.

S. Hassini, Qualification multi-critères des gammes d'usinage : Application aux pièces de structure aéronautique en alliage Airware ®, 2015.

E. Y. Heo, D. W. Kim, B. H. Kim, and F. Frank-chen, Estimation of NC machining time using NC block distribution for sculptured surface machining, Robotics and Computer-Integrated Manufacturing, vol.22, issue.5-6, pp.437-446, 2006.

E. Y. Heo, D. W. Kim, J. Y. Lee, C. S. Lee, and F. Frank-chen, High speed pocket milling planning by feature-based machining area partitioning, Robotics and Computer-Integrated Manufacturing, vol.27, issue.4, pp.706-713, 2011.

F. Hnaien, X. Delorme, and A. Dolgui, Multi-objective optimization for inventory control in two-level assembly systems under uncertainty of lead times, Computers & Operations Research, vol.37, issue.11, pp.1835-1843, 2010.
URL : https://hal.archives-ouvertes.fr/emse-00710388

J. H. Holland, Adaptation in Natural and Artifical Systems (Second Edi), 1992.

Z. Hua, B. Gong, and X. Xu, A DS-AHP approach for multi-attribute decision making problem with incomplete information, Expert Systems with Applications, vol.34, issue.3, pp.2221-2227, 2008.

A. C. Hupman, A. E. Abbas, and T. L. Schmitz, Incentives versus value in manufacturing systems: An application to high-speed milling, Journal of Manufacturing Systems, vol.36, pp.20-26, 2015.

C. L. Hwang and K. Yoon, Multiple Attribute Decision Making : Methods and Applications, a State-of-the-Art Survey, Lecture Notes in Economics and Mathematical Systems, p.186, 1981.

J. Ignizio, A reviw of goal programming : a tool for multiobjective analysis, Journal of Operation Research Society, vol.10, issue.2, pp.151-164, 1978.

T. Ihara and Y. Ito, A New Concept of CAPP Based on Flair of Experienced Engineers -Analyses of Decision-Making Processes of Experienced Process Engineers, CIRP Annals -Manufacturing Technology, vol.40, issue.1, pp.437-440, 1991.

A. Iqbal, N. He, L. Li, and N. U. Dar, A fuzzy expert system for optimizing parameters and predicting performance measures in hard-milling process, Expert Systems with Applications, vol.32, issue.4, pp.1020-1027, 2007.

,

E. Jacquet-lagreze and J. Siskos, Assessing a set of additive utility functions for multicriteria decision-making, the UTA method, European Journal of Operational Research, vol.10, issue.2, pp.151-164, 1982.

J. Y. Jung, Manufacturing cost estimation for machined parts based on manufacturing features, Journal of Intelligent Manufacturing, vol.13, issue.4, pp.227-238, 2002.

C. Kahraman, T. Ertay, and G. Büyüközkan, A fuzzy optimization model for QFD planning process using analytic network approach, European Journal of Operational Research, vol.171, issue.2, pp.390-411, 2006.

,

J. Karandikar and T. Kurfess, Cost optimization and experimental design in milling using surrogate models and value of information, Journal of Manufacturing Systems, vol.37, pp.479-486, 2015.

R. Kast, La théorie de la décision (Repères), 2002.

F. Kianfar and G. Mokhtari, Lot Sizing and lead time quotations in assembly systems, Scientia Iranica, vol.16, issue.2, pp.100-113, 2009.

D. Kiritsis, K. P. Neuendorf, and P. Xirouchakis, Petri net techniques for process planning cost estimation, vol.30, pp.375-387, 1999.

F. Krause, Technological Planning Systems for the Future, Computers in Industry, vol.14, pp.109-116, 1990.

H. C. Lau, C. K. Lee, B. Jiang, I. K. Hui, and K. F. Pun, Development of a computer-integrated system to support CAD to CAPP, International Journal of Advanced Manufacturing Technology, vol.26, issue.9, pp.1032-1042, 2005.

L. Gall and ,. , Panorama des méthodes d'analyse multicritères comme outils d'aide à la décision, 2009.

B. Y. Lee and Y. S. Tarng, Cutting-parameter selection for maximizing production rate or minimizing production cost in multistage turning operations, Journal of Materials Processing Technology, vol.105, issue.1, pp.582-585, 2000.

E. K. Lee, S. Ha, and S. K. Kim, Supplier selection and management system considering relationships in supply chain management, IEEE Transactions on Engineering Management, vol.48, issue.3, pp.307-318, 2001.

M. Leonesio, L. Molinari-tosatti, S. Pellegrinelli, and A. Valente, An integrated approach to support the joint design of machine tools and process planning, CIRP Journal of Manufacturing Science and Technology, vol.6, issue.3, pp.181-186, 2013.

C. Liu, Y. Li, W. Wang, and W. Shen, A feature-based method for NC machining time estimation, Robotics and Computer-Integrated Manufacturing, vol.29, issue.4, pp.8-14, 2013.

D. S. Llanes-coronel, L. Y. Gámez-díaz, L. P. Suarez-quintero, L. J. Páez, F. Torres et al., New promising Euphorbiaceae extracts with activity in human lymphocytes from primary cell cultures, Immunopharmacology and Immunotoxicology, vol.33, issue.2, pp.279-290, 2011.

L. N. Lopez-de-lacalle, J. Perez, J. I. Llorente, and J. A. Sanchez, Advanced cutting conditions for the milling of aeronautical alloys, Journal of Materials Processing Technology, vol.100, issue.1, pp.372-378, 2000.

R. D. Luce and H. Raiffa, Games and decisions, 1957.

M. Mammeri, Une approche d'aide multicritère à la décision pour l'évaluation du confort dans les trains : Construction d'un modèle d'évaluation, 2013.

A. Mardani, A. Jusoh, and E. K. Zavadskas, Fuzzy multiple criteria decision-making techniques and applications -Two decades review from 1994 to, Expert Systems with Applications, vol.42, issue.8, pp.4126-4148, 2014.

H. B. Marri, A. Gunasekaran, and R. J. Grieve, Computer-aided process planning: A state of art, International Journal of Advanced Manufacturing Technology, vol.14, issue.4, pp.261-268, 1998.

J. Martel, L'aide multicritère à la décision : méthodes et applications, 1999.

P. Martin, Méthodologie de génération des processus de fabrication. In Fabrication assistée par ordinateur, 2002.

L. Y. Maystre, J. Pictet, and J. Simos, Méthodes multicritères ELECTRE: description, conseils pratiques et cas d'application à la gestion environnementale, PPUR presses polytechniques, 1994.

M. Mitchell, An introduction to genetic algorithms, 1998.

M. Monreal and C. A. Rodriguez, Influence of tool path strategy on the cycle time of high-speed milling, CAD Computer Aided Design, vol.35, issue.4, pp.395-401, 2003.

V. Mousseau, Problèmes liés à l'évaluation de l'importance relative des critères en aide multicritère à la décision : Réflexions théoriques, expérimentations et implémentations informatiques, 1993.

A. Nafi and C. Werey, Aide à la décision multicritère : Introduction aux méthodes d'analyse multicritère de type ELECTRE, Cours ENGEES Module Ingénierie Financière, pp.1-21, 2010.

B. Niebel, Mechanized process selection for planning new designs, p.737, 1965.

G. Noël and S. Brzakowski, A la recherche du temps à gagner, pourquoi la technologie de groupe, La gamme automatique en usinage, pp.54-64, 1990.

S. K. Ong, M. J. Sun, and A. Y. Nee, A fuzzy set AHP-based DFM tool for rotational parts, Journal of Materials Processing Technology, vol.138, issue.1-3, pp.223-230, 2003.

F. Ounnar, A. Naamane, P. Pujo, and N. Sirdi, Intelligent Control of Renewable Holonic Energy Systems, Proceedings of an International Conference MGEF-13, vol.42, pp.465-472, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01212625

N. Öztürk and F. Öztürk, Neural network based non-standard feature recognition to integrate CAD and CAM, Computers in Industry, vol.45, issue.2, pp.123-135, 2001.

V. Pateloup, Amélioration du comportement cinématique des machines outils UGV lors du calcul de trajets d'usinage : Application à la génération de trajets d'évidement de poches, 2005.

C. Perkgoz, A. Azaron, H. Katagiri, K. Kato, and M. Sakawa, A multi-objective lead time control problem in multistage assembly systems using genetic algorithms, European Journal of Operational Research, vol.180, issue.1, pp.292-308, 2007.

D. C. Porumbel, Algorithmes Heuristiques et Techniques d'Apprentissage -Applications au Problème de Coloration de Graphe, 2009.

E. C. Poulton, Behavioral decision theory : A new approach, 1994.

P. Pujo and F. Ounnar, Pull control for job shop : holonic manufacturing system approach using multicriteria decisionmaking, Journal of Intelligent Manufacturing, vol.23, issue.1, pp.141-153, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01212608

H. Raiffa, Preferences for Multi-Attributed Alternatives, 1969.

C. L. Ramsey, J. Reggia, D. S. Nau, and . Ferrentino, A comparative analysis of methods for expert systems, International Journal of Manmachine Studies, vol.24, issue.5, pp.475-499, 1986.

C. R. Reeves, A genetic algorithm for flowshop sequencing, Computers and Operations Research, vol.22, issue.1, pp.5-13, 1995.

M. Renard, Etude bibliographique : Application de la méthode AHP aux problèmes industriels et logistiques, 2015.

A. Rico, M. Grabisch, C. Labreuche, and A. Chateauneuf, Preference modeling on totally ordered sets by the Sugeno integral, Discrete Applied Mathematics, vol.147, issue.1, pp.113-124, 2005.

B. Roy, Decision_aid and Decision-making, European Journal of Operational Research, vol.45, issue.2-3, pp.324-331, 1990.

B. Roy and P. Bertier, La méthode ELECTRE II, une méthode de classement en présence de critères multiples, p.25, 1971.

B. Roy and D. Bouyssou, Aide multicritère à la décision : Méthodes et cas, Economica, 1993.

B. Roy and V. E. Giard, Méthodologie multicritère d'aide à la décision, 1985.

R. W. Saaty, The analytic hierarchy process-what it is and how it is used, Mathematical Modelling, vol.9, issue.3-5, pp.161-176, 1987.

T. L. Saaty, The analytic hierarchy process, 1980.

T. L. Saaty, Décider face à la complexité : une approche analytique multicritère d'aide à la décision, vol.7, 1984.

T. L. Saaty, How to make a decision: The analytic hierarchy process, European Journal of Operational Research, vol.48, issue.1, pp.9-26, 1990.

M. Salehi and R. Tavakkoli-moghaddam, Application of genetic algorithm to computer-aided process planning in preliminary and detailed planning, Engineering Applications of Artificial Intelligence, vol.22, issue.8, pp.1179-1187, 2009.

A. Samvedi, V. Jain, and F. T. Chan, An integrated approach for machine tool selection using fuzzy analytical hierarchy process and grey relational analysis, International Journal of Production Research, vol.50, issue.12, pp.3211-3221, 2012.

A. Schärlig, Décider sur plusieurs critères, panorama de l'aide à la décision multicritère, Suisse : Presses polytechniques et universitaires romandes, 1985.

E. M. Shehab and H. S. Abdalla, Manufacturing cost modelling for concurrent product development, Robotics and Computer-Integrated Manufacturing, vol.17, issue.4, pp.341-353, 2001.

W. Shen, Q. Hao, H. J. Yoon, and D. H. Norrie, Applications of agent-based systems in intelligent manufacturing: An updated review, Advanced Engineering Informatics, vol.20, issue.4, pp.415-431, 2006.

H. S. Shih, H. J. Shyur, and E. S. Lee, An extension of TOPSIS for group decision making, Mathematical and Computer Modelling, vol.45, issue.7-8, pp.801-813, 2007.

B. S. So, Y. H. Jung, J. W. Park, and D. W. Lee, Five-axis machining time estimation algorithm based on machine characteristics, Journal of Materials Processing Technology, vol.187, pp.37-40, 2007.

,

H. J. Steudel, Computer-aided process planning: past, present and future, International Journal of Production Research, vol.22, issue.2, pp.253-266, 1984.

S. Suh, J. Cho, and J. Hascoet, Incorporation of tool deflection in tool path computation: Simulation and analysis, Journal of Manufacturing Systems, vol.15, issue.3, pp.89571-89580, 1996.

F. Taylor, On the art of cutting metals, 1907.

E. Triantaphyllou and S. H. Mann, Using the Analytic Hierarchy Process for Decision Making in Engineering Applications : Some Challenges, International Journal of Industrial Engineering: Theory, Applications and Practice, vol.2, issue.1, pp.35-44, 1995.

A. Tsoukiàs, De la théorie de la décision à l'aide à la décision, Concepts et méthodes pour l'aide à la décision, pp.25-69, 2006.

A. Tsoukiàs, From decision theory to decision aiding methodology, European Journal of Operational Research, vol.187, issue.1, pp.138-161, 2008.

A. H. Vant-erve and H. J. Kals, XPLANE, a Generative Computer Aided Process Planning System for Part Manufacturing, CIRP Annals -Manufacturing Technology, vol.35, issue.1, p.61899, 1986.

B. Vieille, Usinage. Conservatoire National des Arts et Métiers, 2005.

F. Villeneuve, Génération automatique des processus de fabrication, Fabrication assistée par ordinateur, pp.295-350, 2002.

P. Vincke, L'aide multicritère à la décision, 1989.

P. Vincke, Recent progresses in multicriteria decision-aid, Rivista Di Matematica per Le Scienze Economiche E Sociali, vol.2, pp.21-32, 1994.

J. Vivancos, C. J. Luis, L. Costa, and J. A. Ortiz, Optimal machining parameters selection in high speed milling of hardened steels for injection moulds, Journal of Materials Processing Technology, issue.1-3, pp.1505-1512, 2004.

V. Wagner and E. Duc, Study of Ti-1023 milling with toroidal tool, International Journal of Advanced Manufacturing Technology, vol.75, pp.1473-1491, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01105355

S. Wan, J. Gao, D. Li, Y. Tong, and F. He, Web-based process planning for machine tool maintenance and services, Procedia CIRP, vol.38, pp.165-170, 2015.

H. Wang, ). Ben, and R. A. Wysk, An expert system for machining data section, Computers & Industrial Engineering, vol.10, issue.2, pp.90031-90039, 1986.

L. Wang, G. Adamson, M. Holm, and P. Moore, A review of function blocks for process planning and control of manufacturing equipment, Journal of Manufacturing Systems, vol.31, issue.3, pp.269-279, 2012.

,

L. Wang, M. Holm, and G. Adamson, Embedding a process plan in function blocks for adaptive machining, CIRP Annals -Manufacturing Technology, vol.59, issue.1, pp.433-436, 2010.

M. J. Wang, Tool steel materials selection under fuzzy environment, Fuzzy Sets and Systems, vol.72, issue.3, pp.263-270, 1995.

X. Wang, W. Wang, Y. Huang, N. Nguyen, and K. Krishnakumar, Design of neural network-based estimator for tool wear modeling in hard turning, Journal of Intelligent Manufacturing, vol.19, issue.4, pp.383-396, 2008.

,

Z. G. Wang, M. Rahman, Y. S. Wong, and J. Sun, Optimization of multi-pass milling using parallel genetic algorithm and parallel genetic simulated annealing, International Journal of Machine Tools and Manufacture, vol.45, issue.15, pp.1726-1734, 2005.

R. Weill, G. Spur, and W. Eversheim, Survey of Computer-Aided Process Planning Systems, CIRP Annals -Manufacturing Technology, vol.31, issue.2, pp.539-551, 1982.

A. Wright, I. Darbyshir, M. Park, and B. Davis, Excap and Icap : knowledge-based systems for process planning, CIRP Seminer on Manufacturing Systems, pp.309-313, 1987.

R. A. Wysk, An automated process planning and selection program: appas, 1977.

X. Xu, L. H. Wang, and S. T. Newman, Computer-aided process planning: a critical review of recent developments and future trends, International Journal of Computer Integrated Manufacturing, vol.24, issue.1, pp.1-31, 2011.

,

C. Yang and T. S. Lin, Developing an Integrated Framework for Feature-Based Early Manufacturing Cost Estimation, International Journal of Advanced Manufacturing Technology, pp.307-320, 1997.

D. H. Yang, S. Kim, C. Nam, and J. W. Min, Developing a decision model for business process outsourcing, Computers & Operations Research, vol.34, issue.12, pp.3769-3778, 2007.

Z. Yao, S. K. Gupta, and D. S. Nau, Algorithms for selecting cutters in multi-part milling problems, CAD Computer Aided Design, vol.35, issue.9, pp.825-839, 2003.

S. H. Yeo, Knowledge-based feature recognizer for machining, Computer Integrated Manufacturing Systems, vol.7, issue.1, pp.29-37, 1994.

T. Yifei, L. Dongbo, L. Changbo, and Y. Minjian, A feature-extraction-based process-planning system, International Journal of Advanced Manufacturing Technology, vol.38, issue.11-12, pp.1192-1200, 2008.

A. R. Yildiz, A new hybrid differential evolution algorithm for the selection of optimal machining parameters in milling operations, Applied Soft Computing Journal, vol.13, issue.3, pp.1561-1566, 2013.

M. Yurdakul, AHP as a strategic decision-making tool to justify machine tool selection, Journal of Materials Processing Technology, vol.146, issue.3, pp.365-376, 2004.

Y. Yusof and K. Latif, Survey on computer-aided process planning, International Journal of Advanced Manufacturing Technology, vol.75, issue.1-4, pp.77-89, 2014.

U. Zuperl and F. Cus, Optimization of cutting conditions during cutting by using neural networks, In Robotics and Computer-Integrated Manufacturing, vol.19, pp.189-199, 2003.