, Du scénario d'endommagement

, Modèle d'usure générée par des impacts obliques en eau

, 3.3. Profondeur usée maximale en fonction du volume d'usure

, Synthèse des équations : modèle énergétique de la profondeur usée dans le cas d'impacts obliques

R. M. Brach, Impact dynamics with applications to solid particle erosion, International Journal of Impact Engineering, vol.7, pp.37-53, 1988.

C. Mathon, A. Chaudhary, N. Gay, and P. Pitner, Predicting tube repair at French nuclear steam generators using statistical modeling, Nuclear Engineering and Design, vol.269, pp.6-11, 2014.

F. Axisa, A. Desseaux, and R. Gibert, Experimental study of tube/support impact forces in multi-span PWR steam generator tubes, 1984.

M. S. Rao, G. D. Gupta, and F. L. Eisinger, Vibration and Wear Prediction for Steam Generator Tubes, EPRI, vol.1988, pp.1-222

M. S. Rao, G. Srikantiah, L. Laskowski, and K. Ahluwalia, Prediction of tube wear due to flow-induced vibration in pwr steam generators, ASME, vol.2, pp.257-264, 1997.

M. J. Pettigrew and C. E. Taylor, Vibration analysis of shell-and-tube heat exchangers: an overview-Part 1: flow, damping, fluidelastic instability, Journal of Fluids and Structures, vol.18, pp.469-483, 2003.

M. J. Pettigrew, C. E. Taylor, N. J. Fisher, M. Yetisir, and B. A. Smith, Flow-induced vibration: recent findings and open questions, Nuclear Engineering and Design, vol.185, pp.238-244, 1998.

K. Kato, Classification of Wear Mechanisms/Models, Wear -Mater. Mech. Pract, vol.216, pp.9-20, 2014.

G. W. Stachowiak and A. W. Batchelor, Engineering Tribology. vol, vol.10, 2014.

J. T. Burwell and C. D. Strang, Metallic wear, Proceedings of the Royal Society of London Series A, vol.212, pp.470-477, 1952.

F. T. Barwell, Wear of machine elements, Fundamentals of Tribology, pp.401-441, 1978.

J. F. Archard and W. Hirst, The Wear of Metals under Unlubricated Conditions, Proc Roy Soc Lond, vol.236, pp.397-410, 1956.

P. L. Ko, Metallic wear -a review with special references to vibration-induced wear in power plant components, Tribology International, vol.20, pp.90092-90094, 1987.

H. C. Meng and K. C. Ludema, Wear models and predictive equations: their form and content, Wear, pp.443-457, 1995.

H. Meng, Wear Modeling: Evaluation and Categorization of Wear Models, 1994.

S. Bahadur, Wear Research and Development, Journal of Lubrication Technology, vol.100, p.449, 1978.

K. C. Ludema and R. G. Bayer, Tribological Modeling for Mechanical Designers, 1991.

R. G. Bayer, Mechanical wear prediction prevention, Strain, vol.31, pp.115-115, 1995.

C. Colombié, Usure induite sous petits débattements identification des phénomènes, 1986.

R. B. Waterhouse, Fretting fatigue, International Materials Reviews, vol.37, pp.77-98, 1992.

J. F. Archard, Contact and Rubbing of Flat Surfaces, Journal of Applied Physics, vol.24, pp.981-988, 1953.

R. G. Bayer, W. C. Clinton, and J. L. Sirico, A note on the application of the stress dependency of wear in the wear analysis of an electrical contact, Wear, vol.7, pp.282-289, 1964.

R. G. Bayer and T. C. Ku, Handbook of Analytical Design for Wear, Handb. Anal. Des. Wear, pp.1-97, 1964.

R. G. Bayer, W. C. Clinton, C. W. Nelson, and R. A. Schumacher, Engineering model for wear, Wear, vol.5, pp.90075-90078, 1962.

A. Palmgren, The service life of ball bearings, pp.339-341, 1924.

A. Palmgren, Ball and roller bearing engineering, vol.1, 1959.

N. P. Suh, The delamination theory of wear, Wear, vol.25, issue.73, pp.90125-90132, 1973.

S. Jahanmir and N. P. Suh, Mechanics of subsurface void nucleation in delamination wear, Wear, vol.44, pp.17-38, 1977.

P. A. Engel, Impact Wear of Materials, vol.2, 1978.

P. A. Engel, T. H. Lyons, and J. L. Sirico, Impact wear model for steel specimens, Wear, vol.23, pp.185-201, 1973.

R. G. Bayer, A. T. Shalkey, and A. R. Wayson, Designing for zero wear, Machine Design, vol.41, pp.142-151, 1969.

Y. B. Gessesse, On the fretting wear of nuclear power plant heat exchanger tubes using a fracture mechanics approach: theory and verification, 1997.

Y. Gessesse, H. Attia, and M. O. Osman, A Generalized Impact-Sliding Fretting Wear Model Based on Fracture Mechanics Approach, Manuf. Eng. Mater. Handl. Eng, pp.1078-1088, 2004.

H. Attia, A generalized fretting wear theory, Tribology International, vol.42, pp.1380-1388, 2009.

H. Attia, Y. Gessesse, and M. Osman, New parameter for characterizing and correlating impact-sliding fretting wear to energy dissipation-experimental investigation -Review, Wear, vol.263, pp.419-429, 2007.

G. Levy and J. Morri, Impact fretting wear in CO2-based environments, Wear, vol.106, pp.90106-90107, 1985.

R. Lewis, A modelling technique for predicting compound impact wear, Wear, vol.262, pp.1516-1521, 2007.

M. Akhondizadeh, M. Mahani, S. H. Mansouri, and M. Rezaeizadeh, A computational wear model of the oblique impact of a ball on a flat plate, Journal of Solid Mechanics, vol.5, pp.107-115, 2013.

I. G. Goryacheva, Contact Mechanics in Tribology, vol.61, pp.14-21, 1998.

K. Kato and K. Adachi, Wear Mechanisms, Modern Tribology Handbook, vol.1, p.28, 2001.

I. Kleis and P. Kulu, Solid Particle Erosion, 2008.

R. R. Ellermaa, Erosion prediction of pure metals and carbon steels, Wear, pp.162-164, 1993.

I. Finnie, Erosion of surfaces by solid particles, Wear, vol.3, issue.60, pp.90055-90062, 1960.

J. G. Bitter, A study of erosion phenomena, Wear, vol.6, issue.63, pp.90073-90078, 1963.

J. H. Neilson and A. Gilchrist, Erosion by a stream of solid particles, Wear, vol.11, pp.111-122, 1968.

G. P. Tilly, A two stage mechanism of ductile erosion, Wear, vol.23, pp.90044-90050, 1973.

G. Sundararajan, A comprehensive model for the solid particle erosion of ductile materials, Wear, vol.149, pp.111-127, 1991.

G. Beckmann and J. Gotzmann, Analytical model of the blast wear intensity of metals based on a general arrangement for abrasive wear, Wear, vol.73, issue.81, pp.90299-90303, 1981.

G. Beckmann, A theory of abrasive wear based on shear effects in metal surfaces, Wear, vol.59, pp.421-432, 1980.

P. Peter, Strahlverschleiss an konventionellen Dampferzeugern-Prognose und Verschleissschutz, Wiss Berichte TH Zittau, 1004.

J. Guinot, Etude Bibliographique des Travaux Expérimentaux menés sur l'usure par impacts glissements : influence des principaux paramètres, 1989.

S. Zaghdoudi, Analyse des phénomènes d'usure par choc et frottement, 1992.

K. Wellinger and H. Breckel, Kenngrössen und Verschleiss beim Stoss metallischer Werkstoffe, Wear, vol.13, pp.257-281, 1969.

G. M. Sorokin and T. A. Polyanskaya, Machine for the investigations into the impact fatigue wear, Zavodskaya Laboratoriya, vol.36, pp.611-612, 1970.

R. G. Bayer, P. A. Engel, and J. L. Sirico, Impact wear testing machine, Wear, vol.19, pp.90125-90126, 1972.

S. L. Rice, Reciprocating impact wear testing apparatus, Wear, vol.45, pp.85-95, 1977.

R. R. Pick, K. Brown, and A. Plumtree, Techniques in the study of impact and sliding wear of Zircaloy-4, Wear, vol.52, pp.381-392, 1979.

R. D. Watson, Wear and Corrosion in Water, 1966.

S. F. Wayne, S. L. Rice, K. Minakawa, and H. Nowotny, The role of microstructure in the wear of selected steels, Wear, vol.85, issue.83, pp.90338-90339, 1983.

P. L. Ko, Experimental Studies of Tube Frettings in Steam Generators and Heat Exchangers, Journal of Pressure Vessel Technology, vol.101, p.125, 1979.

P. L. Ko, Heat Exchanger Tube Fretting Wear: Review and Application to Design, Journal of Tribology, vol.107, p.149, 1985.

M. B. Peterson, Design considerations for effective wear control, Wear Control Handbook, vol.1980, pp.413-473

M. A. Shafia and T. S. Eyre, The effect of surface topography on the wear of steel, Wear, vol.61, pp.87-100, 1980.

R. D. Blevins, Fretting Wear of Heat Exchanger Tubes-Part II: Models, Journal of Engineering for Power, vol.101, pp.630-633, 1979.

S. L. Rice, S. F. Wayne, and H. Nowotny, Material transport phenomena in the impact wear of titanium alloys, Wear, vol.65, pp.90024-90025, 1980.

J. R. Barber, The Role of Elastic Tangential Compliance in Oblique Impact, Journal of Tribology, vol.103, p.74, 1981.

P. L. Ko, The significance of shear and normal force components on tube wear due to fretting and periodic impacting, Wear, vol.106, issue.85, pp.90112-90119, 1985.

J. K. Lancaster, The Influence of Temperature on Metallic Wear, Proceedings of the Physical Society Section B, vol.70, pp.112-118, 1957.

R. Blevins, Vibration-Induced Wear of Heat exchanger tubes, Journal of Engineering Materials, vol.107, 1985.

H. J. Connors, Flow-induced vibration and wear of steam generator tubes, Nuclear Technology, vol.55, pp.311-331, 1981.

T. Frick, T. Sobek, and J. Reavis, Overview on the Development and Implementation of Methodologies to compare vibration and wear of steam generators tubes, Proceedings of the ASME Symposium on Flow-Induced Vibrations, vol.3, pp.149-161, 1984.

N. J. Fisher, A. B. Chow, and M. K. Weckwerth, Experimental Fretting-Wear Studies of Steam Generator Materials, Journal of Pressure Vessel Technology, vol.117, p.312, 1995.

P. J. Hofmann, T. Schettler, and D. A. Steininger, PWR steam generator tube fretting and fatigue wear phenomena and correlations, ASME Vibration and Noise, vol.1, pp.211-236, 1992.

W. J. Stronge, Smooth dynamics of oblique impact with friction, International Journal of Impact Engineering, vol.51, pp.36-49, 2013.

N. Maw, J. R. Barber, and J. N. Fawcett, The oblique impact of elastic spheres, Wear, vol.38, pp.101-114, 1976.

A. Kaiser, A. L. Bot, S. Bec, C. Langlade, J. Vernot et al., Influence des paramètres mécaniques sur l'usure d'un contact tube-bague en conditions extrêmes. 17ème Congrès Français de Mécanique, pp.1-6, 2005.

A. Kaiser, Caractérisations tribologiques d'un acier inoxydable ? sollicité en impactsglissement dans un environnement sévère, 2005.

M. J. Puttock and E. G. Thwaite, Elastic Compression of Spheres and Cylinders at Point and Line Contact, National Standards Laboratory Technical Paper, vol.25, p.64, 1969.

J. A. Greenwood and J. B. Williamson, Contact of Nominally Flat Surfaces, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.295, pp.300-319, 1966.

K. L. Johnson, Contact Mechanics. vol, vol.133, 1985.

T. Souilliart, E. Rigaud, A. L. Bot, and C. Phalippou, Energy-based wear law for oblique impacts in dry environment, Tribology International, vol.105, pp.241-249, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02068271

T. Souilliart, E. Rigaud, A. L. Bot, C. Phalippou, A. L. Bot et al., Wear induced by stochastic sliding impacts, pp.1-6, 2015.
URL : https://hal.archives-ouvertes.fr/cea-02491654

T. Souilliart, E. Rigaud, A. L. Bot, and C. Phalippou, Wear generated by sliding impacts, Proceedings of Congrès Français de Mécanique, pp.1-9, 2015.
URL : https://hal.archives-ouvertes.fr/cea-02509668

Y. Kadmiri, E. Rigaud, J. Perret-liaudet, and L. Vary, Experimental and numerical analysis of automotive gearbox rattle noise, Journal of Sound and Vibration, vol.331, pp.3144-3157, 2012.
URL : https://hal.archives-ouvertes.fr/hal-02068291

S. B. Ratner and E. E. Styller, Characteristics of impact friction and wear of polymeric materials, Wear, vol.73, pp.213-234, 1981.

E. E. Osakue and R. J. Rogers, An Experimental Study of Friction During Planar Elastic Impact, Journal of Pressure Vessel Technology, vol.123, p.493, 2001.

E. Rigaud, A. L. Bot, and A. L. Bot, Influence of incidence angle on wear induced by sliding impacts, Wear, vol.307, pp.68-74, 2013.
URL : https://hal.archives-ouvertes.fr/hal-02068286

I. M. Hutchings, Deformation of metal surfaces by the oblique impact of square plates, International Journal of Mechanical Sciences, vol.19, pp.90015-90022, 1977.

T. M. Frick, An Empirical Wear Projection Technology With Steam Generator Tube Applications and Relations to Work-Rate and Wear Simulations/Tests, ASME, vol.2, pp.275-282, 1997.

P. J. Hofmann, T. Schettler, N. Wieling, and D. A. Steininger, Influence of contact conditions on vibration induced wear of metals, Nuclear Engineering and Design, vol.119, pp.439-445, 1990.

T. Souilliart, E. Rigaud, A. L. Bot, and C. Phalippou, An energy approach for impact wear in water environment, Wear, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02068269

R. M. Brach, Classical planar impact theory and the tip impact of a slender rod, International Journal of Impact Engineering, vol.13, issue.93, p.90106, 1993.

R. M. Brach, Friction, Restitution, and Energy Loss in Planar Collisions, Journal of Applied Mechanics, vol.51, p.164, 1984.

I. Chung and M. Lee, An experimental study on fretting wear behavior of cross-contacting Inconel 690 tubes, Nuclear Engineering and Design, 2011.

M. Lim, S. Oh, and Y. Lee, Friction and wear of Inconel 690 and Inconel 600 for steam generator tube in room temperature water, Nuclear Engineering and Design, vol.226, pp.97-105, 2003.

Y. Lee, H. Kim, H. Kim, C. Park, and I. Kim, A comparative study on the fretting wear of steam generator tubes in korean power plants, Wear, vol.255, pp.1198-1208, 2003.

S. Jeong, C. Cho, and Y. Lee, Friction and wear of Inconel 690 for steam generator tube in elevated temperature water under fretting condition, Tribology International, vol.38, pp.283-288, 2005.

P. L. Ko, Wear of Power Plant Components Due to Impact and Sliding, Applied Mechanics Reviews, vol.50, p.387, 1997.

C. Phalippou, E. Herms, and F. Ruffet, PWR steam generator tube and AVB wear under perpendicular impacting, pp.1-10, 2013.

R. Fricke and C. Allen, Repetitive impact wear of steels, Wear, vol.164, pp.837-847, 1993.

I. Finnie and D. H. Mcfadden, On the velocity dependence of the erosion of ductile metals by solid particles at low angles of incidence, Wear, vol.48, pp.90147-90150, 1978.

I. M. Hutchings, A model for the erosion of metals by spherical particles at normal incidence, Wear, vol.70, pp.90347-90348, 1981.

G. P. Tilly, Sand erosion of metals and plastics: A brief review, Wear, vol.14, pp.90048-90057, 1969.

I. Finnie, Some observations on the erosion of ductile metals, Wear, vol.19, pp.81-90, 1972.

S. Rice, Variations in wear resistance due to microstructural condition in high strength steel under repetitive impact, Tribology International, vol.12, pp.90159-90161, 1979.

J. Georges, Frottement, usure et lubrification : tribologie ou science des surfaces, Paris : Editions CNRS, 2000.

M. Sonka, V. Hlavac, and R. Boyle, Image Processing, Analysis and Machine Vision, 1993.

N. Otsu, A Threshold Selection Method from Gray-Level Histograms, IEEE Transactions on Systems, Man, and Cybernetics, vol.9, pp.62-66, 1979.

P. L. Várkonyi and J. E. Laity, Formation of surface features on ventifacts: Modeling the role of sand grains rebounding within cavities, Geomorphology, 2012.

P. Meakin and B. Jamtveit, Geological pattern formation by growth and dissolution in aqueous systems, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.466, pp.659-694, 2010.

G. Kermouche, Contribution à la modélisation théorique et numérique des essais d'indentation et de rayure, 2005.

, TABLEAU 2.1 Composition chimique massique de l'Inconel 690 et de l'acier 410s

, TABLEAU 2.2 Propriétés mécaniques de l'Inconel 690 et de l'acier 410s