On the Nature of Cemented Carbide Wear in Rock Drilling, 2004. ,
Modes of failure of cemented tungsten carbide tool bits (WC/Co): A study of wear parts, Int. J. Refract. Met. Hard Mater, vol.54, pp.27-38, 2016. ,
Automatic seismic prediction ahead of the tunnel boring machine, First Break, vol.18, pp.295-302, 2000. ,
Analytical model for the beam action of a tunnel lining during construction, Int. J. Numer. Anal. Methods Geomech, vol.37, pp.181-200, 2013. ,
ZrO2-WC nanocomposites with superior properties, J. Eur. Ceram. Soc, vol.27, pp.1247-1251, 2007. ,
Microstructure and mechanical properties of WC-20wt% ,
3Y) cermet composites, J. Univ. Sci. Technol. Beijing Miner. Metall. Mater, vol.13, pp.174-177, 2006. ,
Influence of WC particles on the microstructural and mechanical properties of 3 mol% Y2O3 stabilized ZrO2 matrix composites produced by hot pressing, J. Eur. Ceram. Soc, vol.31, pp.2267-2275, 2011. ,
Durabilité tribologique de matériaux pour insert de dents de tunnelier, 2015. ,
An investigation into the forces acting on a TBM during driving -Mining the TBM logged data, Tunn. Undergr. Space Technol, vol.32, pp.143-157, 2012. ,
Tunnel boring machine collision with an ancient boulder beach during the excavation of the Barcelona city subway L10 line: A case of adverse geology and resulting engineering solutions, Eng. Geol, vol.200, pp.31-46, 2016. ,
Optimum spacing of TBM disc cutters: A numerical simulation using the three-dimensional dynamic fracturing method, Tunn. Undergr. Space Technol, vol.25, pp.230-244, 2010. ,
Wear models and predictive equations: their form and content, Wear, vol.181, pp.443-457, 1995. ,
Contact and Rubbing of Flat Surfaces, J. Appl. Phys, vol.24, pp.981-988, 1953. ,
The abrasion of metals: A model of the process, Wear, vol.5, pp.478-498, 1962. ,
A model for the wear of brittle solids under fixed abrasive conditions, Wear, vol.33, pp.369-372, 1975. ,
,
Numerical and experimental analysis of dynamic oblique impact: Effect of impact angle, Wear, vol.332, issue.333, pp.1028-1034, 2015. ,
Dégradation des aciers frittés sous impact-glissement, 2014. ,
Durabilité tribologique de matériaux pour insert de dents de tunnelier, 2015. ,
Comparison of the oxidation behaviour of WC-Co and WC-Ni-Co-Cr cemented carbides, Corros. Sci, vol.53, pp.2754-2760, 2011. ,
Comparison of the friction and wear behaviour of WC-Ni-Co-Cr and WC-Co hardmetals in contact with steel at high temperatures, Wear, vol.280, issue.281, pp.15-21, 2012. ,
Mechanical and tribological characteristics of tungsten cermet composites sintered with Co-based and zirconia mixed binders, Int. J. Refract. Met. Hard Mater, vol.50, pp.163-177, 2015. ,
Microstructure and mechanical properties of WC-20wt% ,
3Y) cermet composites, J. Univ. Sci. Technol. Beijing Miner. Metall. Mater, vol.13, pp.174-177, 2006. ,
ZrO2-WC nanocomposites with superior properties, J. Eur. Ceram. Soc, vol.27, pp.1247-1251, 2007. ,
WC-ZrO2 composites: processing and unlubricated tribological properties, Wear, vol.260, pp.1-9, 2006. ,
Comparative study on indentation fracture toughness measurements of cemented carbides, Proc. Est. Acad. Sci, vol.12, pp.388-398, 2006. ,
,
Durabilité tribologique de matériaux pour insert de dents de tunnelier, 2015. ,
Genesis and role of wear debris in sliding wear of ceramics, Wear, vol.245, pp.53-60, 2000. ,
Property maps for abrasion resistance of materials, Acta Mater, vol.55, pp.6365-6371, 2007. ,
Effect of abrasive particle size and the influence of microstructure on the wear mechanisms in wear-resistant materials, Wear, vol.276, pp.16-28, 2012. ,
, Surface Engineering. CIRP Ann. -Manuf. Technol, vol.36, pp.403-408, 1987.
Numerical and experimental analysis of dynamic oblique impact: Effect of impact angle, Wear, vol.332, issue.333, pp.1028-1034, 2015. ,
Structural Engineer's Pocket Book, 2009. ,
Damage phenomena of thin hard coatings submitted to repeated impacts: Influence of the substrate and film properties, Mater. Sci. Eng. A, vol.560, pp.296-305, 2013. ,
URL : https://hal.archives-ouvertes.fr/emse-01011601
On modelling the influence of thermomechanical behavior in chip formation during hard turning of 100Cr6 bearing steel, CIRP Ann. -Manuf. Technol, vol.50, pp.31-36, 2001. ,
propriétés et usinabilité des aciers durcis, Tournage dur de l'acier à roulement 100Cr6, 2002. ,
Durabilité tribologique de matériaux pour insert de dents de tunnelier, 2015. ,
Energy-based wear law for oblique impacts in dry environment, Tribol. Int, vol.105, pp.241-249, 2017. ,
URL : https://hal.archives-ouvertes.fr/hal-02068271
An energy approach for impact wear in water environment, pp.738-746, 2017. ,
URL : https://hal.archives-ouvertes.fr/hal-02068269