, Ce travail de thèse avait pour objectif la modélisation et la simulation de l'usure des outils de coupe pour l'acier 42CrMo4 et ce dans une approche expérimentale et numérique

, Une première approche numérique a été développée en se basant sur la loi d'Archard mais le choix d'une approche Lagrangienne a engendré des problématiques diverses au niveau de la convergence

, Cette approche reste donc à améliorer et surtout au niveau des procédures permettant d'augmenter la durée d'usinage simulée

, Il serait également intéressant de recourir à d'autres lois d'usure notamment la loi d' d'Usui et Shirakashi [SHI73] qui dépend de la contrainte normale à la surface de contact et de la vitesse de glissement. Il serait possible aussi de tester la loi de Takeyama, qui dépend de l'énergie d'activation du processus de diffusion et de la température de l'outil. Le test de ces diverses lois permettra d'établir un comparatif entre les diverses géométries de l'outil usé pour chaque modèle avec à chaque

, L'intégrité de surface est aussi un point important à investiguer par la suite notamment le retour élastique. Il est éventuellement possible d'élaborer un modèle EF de la pièce, sous ABAQUS © /Implicit et ce dans le but de modéliser les contraintes résiduelles

, Il serait également judicieux d'adopter une loi de frottement plus pertinente que la loi de

. Coulomb, Loi de frottement avec décroissance exponentielle

, Il pourrait être aussi intéressant d'étudier l'évolution du coefficient d'usure au cours du temps surtout que très peu d'études dans la littérature s'intéressent à l'identification de ce paramètre

, Telles sont quelques perspectives que la réalisation de ce travail de recherche ont permis d'envisager pour pousser encore plus loin la problématique scientifique et industrielle de l'usinage dans des conditions extrêmes

, ABAQUS -Analysis user's manual, 2003.

J. F. Archard, Contact and Rubbing of Flat Surfaces, Journal of Applied Physics, vol.24, issue.8, pp.981-988, 1953.

A. Attanasio, E. Ceretti, A. Fiorentino, C. Cappellini, and C. Giardini, Investigation and FEM-based simulation of tool wear in turning operations with uncoated carbide tools, Wear, vol.269, pp.344-350, 2010.

J. L. Bacaria, Un modèle comportemental et transitoire pour la coupe des métaux, 2001.

M. Bäker, Finite element simulation of high-speed cutting forces, Journal of Materials Processing Technology, vol.176, pp.117-126, 2006.

M. Barge, H. Hamdi, J. Rech, and J. M. Bergheau, Numerical modelling of orthogonal cutting: influence of numerical parameters, Journal of Materials Processing Technology, pp.1148-1153, 2005.

M. Barge, Étude expérimentale et numérique des mécanismes de coupe par abrasion, 2011.

J. Battaglia, O. Cois, L. Puigsegur, and A. Oustaloup, Solving an inverse heat conduction problem using a non-integer identified model, International Journal of Heat and Mass Transfer, vol.44, pp.2671-2680, 2001.

J. M. Bergheau, V. Robin, and F. Boitout, Finite Element Simulation of processes involving moving heat sources. Application to welding and surface treatment, Journal of Shanghai Jiaotong University (Science), vol.5, issue.1, pp.114-122, 2000.

J. M. Bergheau, D. Pont, and J. B. Leblond, Three-dimensional simulation of a laser surface treatment through steady state computation in the heat source's comoving frame, Mechanical Effects of Welding, International Union of Theoretical and Applied Mechanics, pp.85-92, 1991.

C. Bonnet, Simulation numérique de la coupe du 316L, Mémoire de Master 2 Recherche, 2007.

C. Bonnet, F. Valiorgue, J. Rech, C. Claudin, H. Hamdi et al., Identification of a friction model : application to the context of dry cutting of an AISI 316L austenitic stainless steel with a TiN coated carbide tool, International Journal of Machine Tools & Manufacture, vol.48, pp.1211-1223, 2008.

S. Cheon and N. Kim, Prediction of tool wear in the blanking process using updated geometry, Wear, pp.160-170, 2016.

T. H. Childs, Friction modelling in metal cutting, Wear, vol.260, pp.310-318, 2006.

C. Courbon, Vers une modélisation physique de la coupe des aciers spéciaux : intégration du comportement métallurgique et des phénomènes tribologiques et thermiques aux interfaces, 2011.

J. Donea, A. Huerta, J. P. Ponthot, and A. Rodriguez-ferran, Arbitrary Lagrangian-Eulerian Methods, Encyclopedia of Computational Mechanics, vol.1, 2004.

F. Ducobu, E. Rivière-lorphèvre, and E. Filippi, On the introduction of adaptative mass scaling in a finite element model of Ti6Al4V orthogonal cutting, Simulation Modelling Practice and Theory, vol.53, pp.1-14, 2015.

D. Dudzinski and A. Molinari, A modelling of cutting for viscoplastic materials, International Journal of Mechanical Sciences, vol.39, pp.369-389, 1997.

K. F. Eldridge, O. Dillon, and W. Y. Lu, Thermo-viscoplastic finite element modelling of machining under various cutting conditions, Transaction of NAMIR/SME, pp.162-169, 1991.

F. Halila, C. Czarnota, and M. Nouari, Modélisation par une approche probabiliste et tribologique de l'usure par abrasion des outils de coupe, 2013.

F. Halila, Modélisation analytique et caractérisation expérimentale de l'usure par abrasion des outils de coupe, thèse de Doctorat, 2015.

J. Hashemi, A. A. Tseng, and P. C. Chou, Finite element Modelling of segmental chip formation in high-speed machining, Journal of Material Engineering and Performance, vol.3, issue.5, pp.712-721, 1994.

E. Felder and P. Montmitonnet, Théorie de l'usure-Mesure, caractérisation des contacts et vitesse d'usure, Techniques de l'Ingénieur, 2015.

L. Filice, F. Micari, L. Settineri, and D. Umbrello, Wear modelling in mild steel orthogonal cutting when using uncoated carbide tools, Wear, vol.262, pp.545-554, 2007.

W. Gilbert, Economics of machining, Machining theory and practice, pp.465-485, 1950.

G. S. Goindi and K. Saini, Thermal Modelling of Heat Flux and Tool-chip Interfacial Temperature Distribution in Orthogonal Machining, Indian Journal of Science and Technology, vol.9, issue.36, p.2016

T. Guediche, C. Mabrouki, J. M. Donnet, H. Bergheau, and . Hamdi, A new procedure to increase the orthogonal cutting machining time simulated, Procedia CIRP, vol.31, pp.299-303, 2015.
URL : https://hal.archives-ouvertes.fr/hal-02043008

S. Hollinger, E. Depraetere, and O. Giroux, Wear mechanism of tungsten carbide dies during wet drawing of steel tyre cords, Wear, vol.255, pp.1291-1299, 2003.

B. Huang, P. Zou, Y. Guo, C. Liu, J. Huang et al., Sliding behavior and wear mechanism of iron and cobalt-based high-temperature alloys against WC and SiC balls, Int. Journal of Refractory Metals and Hard Materials, vol.59, pp.40-55, 2016.

T. J. Hugues and A. Brooks, A theoretical framework for Petrov-GaLerkin methods with discontinuous weighting functions: application to the streamline-upwind procedure, Finite Elements in Fluids, vol.4, pp.47-65, 1982.

G. R. Johnson and W. H. Cook, A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures, Proceedings of the Seventh International Symposium on Ballistics, pp.541-547, 1983.

G. R. Johnson and W. , Cook-Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures-Engineering Fracture Mechanics, vol.21, pp.31-48, 1985.

F. Kalay, Simulation numérique de l'usinage : Application à l'aluminium AU4G (A2024-T351), Master recherche à l'INSA de Lyon, 2007.

K. Iwata, K. Osakada, and Y. Terasaka, Process modelling of orthogonal cutting by the rigid plastic finite element method, Journal of Engineering Materials and Technology, vol.106, issue.2, pp.132-138, 1984.

S. K. Khrais and Y. J. Lin, Wear mechanisms and tool performance of TiAlN PVD coated inserts during machining of AISI 4140 steel, Wear, vol.262, issue.1-2, pp.64-69, 2007.

M. Kronenberg, Replacing the Taylor formula by a new tool life equation, International Journal of Machine Tool Design and Research, vol.10, pp.193-202, 1970.

B. Li, A review of tool wear estimation using theoretical analysis and numerical simulation technologies, International Journal of Refractory Metals and Hard Materials, vol.35, pp.143-151, 2012.

G. List, Etude des mécanismes d'endommagement des outils carbure WC-Co par la caractérisation de l'interface outil-copeau : Application à l'usinage à sec de l'Alliage d'Aluminium Aéronautique AA2024 T351, 2004.

T. Mabrouki, F. Girardin, M. Asad, and J. F. , Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351), International Journal of Machine Tools and Manufacture, vol.48, issue.11, pp.1187-1197, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00383575

V. Marinov, Experimental study on the abrasive wear in metal cutting, Wear, vol.197, pp.242-247, 1996.

T. D. Marusich and M. Ortiz, Modelling and simulation of high-speed machining, International Journal for Numerical Methods in Engineering, vol.38, pp.3675-3694, 1995.

M. E. Merchant, Mechanics of the metal cutting process I : Orthogonal cutting and a type 2 chip, Journal of Applied Physics, ASME, vol.16, pp.267-275, 1945.

A. Molinari and D. Dudzinski, Stationary shear band in high speed machining, C. R. Acad. Sci. Paris Ser. II, vol.315, pp.399-405, 1992.

, Conclusion générale et perspectives

J. F. Molinari, Three-dimensional finite-element analysis of high-speed machining, from Metal cutting and high speed machining

. Dudunski, , 2002.

K. Moussaoui, Influence de l'usinage sur la durée de vie en fatigue de pièces aéronautiques en alliage de titane, thèse soutenue de l, 2013.

A. Moufki, Contribution à la modélisation de l'usinage par une approche thermo-viscoplastique : Application à la coupe orthogonale et oblique, thèse de Doctorat, 1998.

M. Nouari, Modélisation de l'usure par diffusion des outils de coupe en usinage à grande vitesse, thèse de Doctorat, 2000.

P. L. Oxley, Mechanics of metal cutting for a material of variable flow stress, Journal of Engineering for Industry, series B, vol.85, pp.339-345, 1963.

T. Ozel, The influence of friction models on finite element simulations of machining, International Journal of Machine Tools & Manufacture, vol.46, pp.518-530, 2006.

A. M. Prior, Application of implicit and exolicit finite element technique to metal forming, Journal of Materials Processing Technology, vol.45, pp.649-656, 1994.

M. Remadna, Le comportement du système usinant en tournage dur : application au cas d'un acier trempe usine avec des plaquettes CBN (nitrure de bore cubique), thèse de l, 2001.

S. Saadlaoui, Modélisation des conditions de contact outil-copeau en coupe orthogonale

F. Salvatore, S. Saad, and H. Hamdi, Modeling and simulation of tool wear during the cutting process, Procedia CIRP, vol.8, pp.305-310, 2013.

, Catalogue SANDVIK Coromont -Outils de tournage

G. S. Sekhon and J. L. Chenot, Numerical simulation of continuous chip formation during non-steady orthogonal cutting, Engineering Computations, vol.10, pp.31-48, 1993.

M. C. Shaw, Metal Cutting Principles, p.651, 2005.

T. Shirakashi and E. Usui, Friction characteristics on tool face in machining, Journal of the Japan Society of Precision Engineering, vol.39, issue.464, pp.966-972, 1973.

A. J. Shih and H. T. Yang, Experimental and finite element predictions of residual stresses due to orthogonal metal cutting, International Journal for Numerical Methods in Engineering, vol.36, pp.1487-1507, 1993.

H. So, Characteristics of wear results tested by pin-on-disc at moderate to high speeds, Tribol.Int, vol.29, issue.5, pp.415-423, 1996.

H. Takeyama and R. Murata, Basic Investigation of Tool Wear, Journal of Manufacturing Science and Engineering, vol.85, pp.33-37, 1963.

F. Taylor, On the art of cutting metals, Transactions of ASME, vol.28, pp.70-350, 1907.

K. Ueda and K. Manabe, Rigid-plastic FEM analysis of three-dimensional deformation field in chip formation process, Annals of the CIRP, vol.42, issue.1, pp.35-38, 1993.

E. Usui, T. Shirakashi, and T. Kitagawa, Analytical prediction of cutting tool wear, Wear, vol.100, pp.129-151, 1984.

M. Wang, H. Yang, Z. Sun, L. Guo, and X. Ou, Dynamic explicit F.E modeling of hot rolling process, Transactions of Nonferrous Metals Society of China, vol.16, pp.1274-1280, 2006.

J. S. Wu, D. Et, and W. Y. Lu, Thermo-viscoplastic modelling of machining process using a mixed finite element method, Journal of Manufacturing Science and Engineering, vol.118, issue.4, pp.470-482, 1996.

J. Q. Xie, A. E. Bayoumi, and H. M. Zbib, FEA modelling and simulation of shear localized chip formation in metal cutting, International Journal of Machine Tools and Manufacture, vol.38, pp.1067-1087, 1998.

L. Xie, Estimation of two-dimension tool wear based on finite element method, thèse soutenue à l, 2004.

L. J. Xie, J. Schmidt, C. Schmidt, and F. Biesinger, 2D FEM estimate of tool wear in turning operation, vol.258, pp.1479-1490, 2005.

Y. Yen, J. Söhner, B. Lilly, and T. Altan, Estimation of tool wear in orthogonal cutting using the finite element analysis, Journal of Materials Processing Technology, vol.146, pp.82-91, 2004.

F. Zemzemi, Caractérisation de modèles de frottement aux interfaces pièce-outil-copeau en usinage : application au cas de l'usinage des aciers et de l'inconel 718, thèse soutenue à l'Ecole Centrale de Lyon, 2007.

F. J. Zerilli and R. W. Armstrong, Dislocation-mechanics-based constitutive relations for material dynamics calculations, Journal of Applied Mechanics, vol.61, issue.5, pp.1816-1834, 1987.

L. , Finite element analysis of ductile fracture behaviour of pipe sections with surface crack, 2005.

M. Wang, H. Yang, Z. Sun, L. Guo, and X. Ou, Dynamic explicit F.E modeling of hot rolling process, Transactions of Nonferrous Metals Society of China, vol.16, pp.1274-1280, 2006.