, pour ensuite solliciter ces échantillons avec une amplitude mécanique faible : l'essai cyclique ne risque pas d'endommager le matériau, la variation de l'auto-échauffement sera donc directement corrélée à la variation d'endommagement créé sous chargement monotone

, De même, il peut être intéressant de réaliser des essais d'auto-échauffement à amplitude constante : ainsi, la différence entre les deux courbes d'auto-échauffement (à R constant, et à amplitude constante) permettra de différentier l'endommagement créé par la fatigue de l'endommagement créé par une amplitude de chargement croissante. Ces deux exemples d'essai, non exhaustifs

. Une, une perspective à moyen terme est d'intégrer les grandeurs thermiques liées à l'auto-échauffement dans les modèles mécaniques de durée de vie. En effet, de tels modèles, développés par ailleurs à l'ONERA, s'intéressent à la fois à l'évolution d'une dégradation du matériau étudié sous l'effet de la fatigue, et à la mise en place d'un critère de rupture. Le but est de décrire la tenue en fatigue d'une pièce soumise à un chargement potentiellement aléatoire ou multiaxial

, L'intégration de grandeurs thermiques associées à l'auto-échauffement en lien avec l'endommagement dans ces modèles permettrait de créer un lien entre la fatigue et l'autoéchauffement

À. Enfin and . Long-terme, les perspectives consistent à réaliser des essais d'autoéchauffement à faible nombre de cycles sur des structures hybrides (métalliques-composites) ou sur des matériaux comportant des défauts initiaux d'élaboration. Notamment, l'utilisation de cartographies offre la possibilité de visualiser sur une structure les zones qui s'échauffent davantage, provoquées par un défaut ou par l'inclusion d'un autre matériau. La finalité est de valider les modèles de durée de vie sur structure

L. S. Abello, Caractérisation thermomécanique du comportement en fatigue des thermoplastiques renforcés de fibres de verre courtes, 2018.

R. D. Adams and P. Cawley, A review of defect types and nondestructive testing techniques for composites and bonded joints, NDT International, vol.15, 1988.

. Afnor, Essais de fatigue -traitement statistique des données. Normalisation française, pp.3-405, 1991.

L. Angrand, Modèle d'endommagement incrémental en temps pour la prévision de la durée de vie des composites tissés 3D en fatigue cyclique et en fatigue aléatoire, 2016.

M. F. Arif, Mécanismes d'endommagement du polyamide-66 renforcé par des fibres de verre courtes, soumis à un chargement monotone et en fatigue: Influence de l'humidité relative et de la microstructure induite par le moulage par injection, 2014.

Z. S. Bagheri, I. El-sawi, H. Bougherara, and R. Zdero, Biomechanical fatigue analysis of an advanced new carbon fiber/flax/epoxy plate for bone fracture repair using conventional fatigue tests and thermography, Journal of the Mechanical Behavior of Biomedical Materials, vol.35, pp.27-38, 2014.

G. Bai, Evaluation par vibrothermographie de l'endommagement de composites tissés, 2016.

S. Baillargeon, Le krigeage : revue de la théorie et application à l'interpolation spatiale de données de précipitations, 2005.

J. L. Bailleul, G. Guyonvarch, B. Garnier, Y. Jarny, and D. Delaunay, Identification des propriétés thermiques de composites fibres de verre/résines thermodurcissables, vol.35, pp.65-76, 1996.

G. Barbier, M. V. Doquet, M. S. Degallaix, M. S. Calloch, and M. F. Gallerneau, Fatigue biaxiale à grand nombre de cycles : étude expérimentale et modèle d'endommagement à deux échelles probabiliste, 2011.

P. M. Barnard, R. J. Butler, C. , and P. T. , The Strength-Life Equal rank Assumption and its application to the fatigue life prediction of composite materials, International Journal of Fatigue, 1988.

S. Barré and M. L. Benzeggagh, On the use of acoustic emission to investigate damage mechanisms in glass-fibre-reinforced polypropylene, Composite Science and Technology, 1994.

N. L. Batista, P. Olivier, G. Bernhart, M. C. Rezende, and E. C. Botelho, Correlation between degree of crystallinity, morphology and mechanical properties of PPS/carbon fiber laminates, Mat. Res, vol.19, pp.195-201, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01620301

J. Batsale and C. Pradere, Thermal Instrumentation for the Control of Manufacturing Processes of Organic Matrix Composite Materials, Heat Transfer in Polymer Composite Materials, N. Boyard, pp.301-331, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02369519

A. Benaarbia, Analyse énergétique du comportement thermomécanique du PA6. 6 renforcé de fibres de verre, 2014.

J. Berthelot, Relation between Amplitudes and Rupture Mechanisms in Composite Materials, Journal of Reinforced Plastics and Composites, vol.16, 1988.

J. Berthelot, Transverse cracking and delamination in cross-ply glass-fiber and carbonfiber reinforced plastic laminates: Static and fatigue loading, Applied Mechanics Reviews, vol.56, p.111, 2003.

J. Berthelot, Mécanique des matériaux et structures composites, 2010.

J. M. Berthelot and J. Rhazi, Acoustic emission in carbon fibre composites, Composites Science and Technology, vol.37, pp.411-428, 1990.

W. Von-bestenbostel, F. , and K. , The appearance of fatigue striations in the SEM, 2009.

P. Bonnet, X. Hermite, I. Huther, and F. Lefèbvre, Guide pour le choix d'une méthode d'essais de fatigue et de l'analyse statistique associée. Collection Fatigue, 2016.

Z. Boufaida, Analyse des propriétés mécaniques de composites taffetas verre/matrice acrylique en relation avec les propriétés d'adhésion des fibres sur la matrice, 2015.

T. Boulanger, A. Chrysochoos, C. Mabru, and A. Galtier, Calorimetric analysis of dissipative and thermoelastic effects associated with the fatigue behavior of steels, International Journal of Fatigue, vol.26, pp.221-229, 2004.

M. Broudin, P. Y. Le-gac, V. Le-saux, C. Champy, G. Robert et al., , 2015.

, Water diffusivity in PA66: Experimental characterization and modeling based on free volume theory, European Polymer Journal, vol.67, pp.326-334

S. Calloch, C. Doudard, F. Hild, M. Poncelet, B. Weber et al., Dialogue essaismodèle pour l'interprétation des liens entre mesure d'auto-échauffement sous chargement cyclique et fatigue polycyclique, vol.107, pp.75-82, 2010.

B. Castanié, C. Bouvet, and D. Guedra-degeorges, Structures en matériaux composites stratifiés, 2013.

E. Castillo and A. Fernández-canteli, A unified statistical methodology for modeling fatigue damage, 2009.

A. Chateauminois, B. Chabert, J. P. Soulier, and L. Vincent, Hygrothermal ageing effects on the static fatigue of glass/epoxy composites, Composites, vol.24, pp.547-555, 1993.

P. C. Chou and R. Croman, Residual Strength in Fatigue Based on the Strength-Life Equal Rank Assumption, Journal of Composite Materials, 1978.

A. Chrysochoos and H. Louche, An infrared image processing to analyse the calorific effects accompanying strain localisation, International Journal of Engineering Science, 2000.

I. Clavería, D. Elduque, J. Santolaria, C. Pina, C. Javierre et al., The influence of environmental conditions on the dimensional stability of components injected with PA6 and PA66, Polymer Testing, vol.50, pp.15-25, 2016.

C. Clienti, G. Fargione, G. La-rosa, A. Risitano, and G. Risitano, A first approach to the analysis of fatigue parameters by thermal variations in static tests on plastics, Engineering Fracture Mechanics, vol.77, pp.2158-2167, 2010.

C. Colombo, F. Libonati, F. Pezzani, A. Salerno, and L. Vergani, Fatigue behaviour of a GFRP laminate by thermographic measurements, Procedia Engineering, vol.10, pp.3518-3527, 2011.

S. Daggumati, I. De-baere, W. Van-paepegem, J. Degrieck, J. Xu et al., Fatigue and post-fatigue stress-strain analysis of a 5-harness satin weave carbon fibre reinforced composite, Composites Science and Technology, vol.74, pp.20-27, 2013.

V. Dattoma and S. Giancane, Evaluation of energy of fatigue damage into GFRC through digital image correlation and thermography, Composites Part B: Engineering, vol.47, pp.283-289, 2013.

D. L. Davies and D. W. Bouldin, A Cluster Separation Measure, IEEE Transactions on Pattern Analysis and Machine Intelligence PAMI-1, pp.224-227, 1979.

I. De-baere, W. Van-paepegem, and J. Degrieck, On the design of end tabs for quasi-static and fatigue testing of fibre-reinforced composites, Polym. Compos, vol.30, pp.381-390, 2009.

I. De-baere, W. Van-paepegem, C. Hochard, and J. Degrieck, On the tension-tension fatigue behaviour of a carbon reinforced thermoplastic part II: Evaluation of a dumbbell-shaped specimen, Polymer Testing, vol.30, pp.663-672, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01315629

J. Degrieck and W. V. Paepegem, Fatigue Damage Modelling of Fibre-reinforced Composite Materials: Review. 32, 2001.

L. Demaret, Endommagement des matériaux composites en fatigue. École Nationale Supérieure de Mécanique et des Microtechniques, 2017.

C. Doudard, Détermination rapide des propriétés en fatigue à grand nombre de cycles à partir d'essais d'échauffement, 2004.

C. Doudard, S. Calloch, P. Cugy, A. Galtier, and F. Hild, A probabilistic two-scale model for high-cycle fatigue life predictions, Fatigue & Fracture of Engineering Materials & Structures, vol.28, pp.279-288, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00322496

P. Duchêne, Caractérisation non destructive des matériaux composites en fatigue : diagnostic de l'état de santé et pronostic de la durée de vie résiduelle par réseaux de neurones, 2018.

C. Durantin, J. Marzat, and M. Balesdent, Analysis of multi-objective Kriging-based methods for constrained global optimization, Computational Optimization and Applications, vol.63, pp.903-926, 2016.

G. Ehrenstein and F. Montagne, Matériaux polymères. Structure, propriétés et applications (Hermès Science), 2000.

T. R. Emery and J. M. Dulieu-barton, Thermoelastic Stress Analysis of damage mechanisms in composite materials, Composites Part A: Applied Science and Manufacturing, vol.41, pp.1729-1742, 2010.

E. France, TECAMID 66 natural -Produits semi-finis, 2018.

B. Esmaeillou, Approche cinétique du comportement en fatigue du Polyamide 66 renforcé par 30% de fibres de verre, 2011.

G. Fargione, A. Geraci, G. La-rosa, and A. Risitano, Rapid determination of the fatigue curve by the thermographic method, International Journal of Fatigue, vol.24, pp.11-19, 2002.

A. Fernández-canteli, C. Przybilla, M. Nogal, M. L. Aenlle, and E. Castillo, ProFatigue: A Software Program for Probabilistic Assessment of Experimental Fatigue Data Sets, Procedia Engineering, vol.74, pp.236-241, 2014.

J. A. Ferreira, J. D. Costa, P. N. Reis, and M. O. Richardson, Analysis of fatigue and damage in glass-fibre-reinforced polypropylene composite materials, Composites Science and Technology, vol.7, 1999.

R. Fouchereau, Modélisation probabiliste des courbes S-N, 2014.

T. Fujii, S. Amijima, and K. Okubo, Microscopic fatigue processes in a plain-weave glassfibre composite, Composites Science and Technology, vol.49, pp.327-333, 1993.

A. Galtier, O. Bouaziz, L. , and A. , Influence de la microstructure des aciers sur leur propriétés mécaniques, Mécanique & Industries, vol.3, pp.457-462, 2002.

E. K. Gamstedt and R. Talreja, Fatigue damage mechanisms in unidirectional carbon-fibrereinforced plastics, Journal of Materials Science, vol.34, pp.2535-2546, 1999.

D. Garcia, Mesure de formes et de champs de déplacements tridimensionnels par stéréocorrélation d'images, 2007.

D. Gibert, Éléments de Traitement du Signal, 1994.

N. Godin, S. Huguet, R. Gaertner, and L. Salmon, Clustering of acoustic emission signals collected during tensile tests on unidirectional glass/polyester composite using supervised and unsupervised classifiers, NDT & E International, vol.37, pp.253-264, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00474933

L. Gornet, Généralités sur les matériaux composites, 2008.

L. Gornet, O. Westphal, A. Krasnobrizha, P. Rozycki, C. Peyrac et al., , 2015.

, Détermination rapide de la limite de fatigue d'un tissu carbone à matrice thermoplastique, Comptes Rendus Des JNC, vol.19

L. Gornet, D. Sudevan, and P. Rozycki, A study of various indicators to determine the fatigue limit for woven carbon/epoxy composites under self heating methodology, Procedia Engineering, vol.213, pp.161-172, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02443141

L. Greenspan, Humidity fixed points of binary saturated aqueous solutions, Journal of Research of the National Bureau of Standards Section A: Physics and Chemistry, vol.81, p.89, 1977.

H. T. Hahn and R. Y. Kim, Proof Testing of Composite Materials, Journal of Composite Materials, vol.9, pp.297-311, 1975.

W. Harizi, Caractérisation de l'endommagement des composites à matrice polymère par une approche multi-technique non destructive, 2012.

W. Harizi, S. Chaki, G. Bourse, and M. Ourak, Mechanical damage assessment of Glass Fiber-Reinforced Polymer composites using passive infrared thermography, Composites Part B: Engineering, vol.59, pp.74-79, 2014.

J. Henry, Z. Aboura, K. Khellil, and S. Otin, Suivi de l'endommagement en fatigue d'un composite à renfort Interlock Carbone/Epoxy par Emission Acoustique, 17èmes Journées Nationales Sur Les Composites (JNC17), AMAC, ed, p.207, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00597427

Y. Hu, A. W. Lang, X. Li, and S. R. Nutt, Hygrothermal aging effects on fatigue of glass fiber/polydicyclopentadiene composites, Polymer Degradation and Stability, vol.110, pp.464-472, 2014.

J. Huang, Rapid Determination of Fatigue Behaviour for Carbon Fiber Reinforced Polymer Laminates Based on Thermodynamic Phenomena Observed by IR Thermography, 2019.

J. Huang, M. Pastor, C. Garnier, and X. Gong, Rapid evaluation of fatigue limit on thermographic data analysis, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01924946

J. Huang, M. Pastor, C. Garnier, and X. Gong, Rapid evaluation of fatigue limit on thermographic data analysis, International Journal of Fatigue, vol.104, pp.293-301, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01924946

C. Huchette, Sur la complémentarité des approches expérimentales et numériques pour la modélisation des mécanismes d'endommagement des composites stratifiés, 2006.

S. Huguet, N. Godin, R. Gaertner, L. Salmon, and D. Villard, Use of acoustic emission to identify damage modes in glass fibre reinforced polyester, Composites Science and Technology, vol.62, pp.1433-1444, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00475466

V. Huon, B. Cousin, B. Wattrisse, and O. Maisonneuve, Investigating the thermomechanical behaviour of cementitious materials using image processing techniques, Cement and Concrete Research, vol.39, pp.529-536, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00572243

J. Jedidi, F. Jacquemin, and A. Vautrin, Accelerated hygrothermal cyclical tests for carbon/epoxy laminates, Composites Part A: Applied Science and Manufacturing, vol.37, pp.636-645, 2006.
URL : https://hal.archives-ouvertes.fr/hal-01007828

L. Jégou, Caractérisation rapide des propriétés en fatigue d'un polymère renforcé par des fibres courtes, pour une application automobile, 2012.

L. Jegou, Y. Marco, V. Le-saux, and S. Calloch, Fast prediction of the Wöhler curve from heat build-up measurements on Short Fiber Reinforced Plastic, International Journal of Fatigue, vol.47, pp.259-267, 2013.

L. Jégou, Y. Marco, V. Le-saux, and S. Calloch, Fast prediction of the Wöhler curve from heat build-up measurements on Short Fiber Reinforced Plastic, International Journal of Fatigue, vol.47, pp.259-267, 2013.

C. J. Jones, R. F. Dickson, T. Adam, H. Reiter, and B. Harris, Environmental fatigue of reinforced plastics, Composites, vol.14, pp.288-293, 1983.

J. Kim and P. K. Liaw, Monitoring tensile damage evolution in Nextel 312/Blackglas TM composites, Materials Science and Engineering: A, vol.409, pp.302-308, 2005.

S. Kim, K. Koh, S. Boyd, and D. Gorinevsky, l1 Trend Filtering, vol.51, pp.339-360, 2009.

W. Kim, M. Choi, Y. Huh, and S. Eom, Measurement of thermal stress and prediction of fatigue for STS using Lock-in thermography, Proc. 12th A-PCNDT, 2006.

N. Kimtangar, Contribution à l'étude des lois d'endommagement en fatigue, 2003.

J. C. Krapez and D. Pacou, Thermography detection of damage initiation during fatigue tests. SPIE's Aerosense, 2002.

J. C. Krapez, D. Pacou, and C. Bertin, Application of lock-in thermography to rapid evaluation of fatigue limit in metals, 1999.

J. Krapez, D. Pacou, and G. Gardette, Lock-in thermography and fatigue limit of metals, Proceedings of the 2000 International Conference on Quantitative InfraRed Thermography, 2000.

P. Krawczak, Essais des plastiques renforcés, 1997.

P. Krawczak and J. Pabiot, Acoustic emission applied to glass fibre/organic thermosetting matrix interface characterization, Applied Composite Materials, vol.1, pp.373-386, 1994.
URL : https://hal.archives-ouvertes.fr/hal-01773258

D. G. Krige, A statistical approach to some basic mine valuation problems on the Witwatersrand, Journal of the Southern African Institute of Mining and Metallurgy, 1951.

L. Rosa, G. Risitano, and A. , Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components, International Journal of Fatigue, vol.22, pp.65-73, 2000.

A. Launay, Y. Marco, M. H. Maitournam, and I. Raoult, Modelling the influence of temperature and relative humidity on the time-dependent mechanical behaviour of a short glass fibre reinforced polyamide, Mechanics of Materials, vol.56, pp.1-10, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00778275

,. Le-goër, A. , and J. , Extensométrie. Techniques de l'Ingénieur, 1992.

J. Lemaitre, J. Chaboche, A. Benallal, and R. Desmorat, Mécanique des matériaux solides (Dunod), 2009.

F. Libonati and L. Vergani, Damage assessment of composite materials by means of thermographic analyses, Composites Part B: Engineering, vol.50, pp.82-90, 2013.

A. Likas, N. Vlassis, J. Verbeek, and J. , The global k-means clustering algorithm, Pattern Recognition, vol.36, pp.451-461, 2003.
URL : https://hal.archives-ouvertes.fr/inria-00321493

M. P. Luong, Infrared thermography of fatigue in metals, pp.222-233, 1992.

M. P. Luong, Infrared thermographic scanning of fatigue in metals, Nuclear Engineering and Design, vol.158, pp.363-376, 1995.

M. P. Luong, Fatigue limit evaluation of metals using an infrared thermographic technique, Mechanics of Materials, vol.28, pp.155-163, 1998.
URL : https://hal.archives-ouvertes.fr/hal-00111598

A. Malpot, Etude du comportement en fatigue d'un composite à matrice polyamide renforcé d'un tissu de fibres de verre pour application automobile, 2017.

A. Malpot, F. Touchard, and S. Bergamo, Effect of relative humidity on mechanical properties of a woven thermoplastic composite for automotive application, Polymer Testing, vol.48, pp.160-168, 2015.

A. Malpot, F. Touchard, and S. Bergamo, Influence of moisture on the fatigue behaviour of a woven thermoplastic composite used for automotive application, Materials & Design, vol.98, pp.12-19, 2016.

F. Maquin, Méthodologie expérimentale d'étude du comportement thermo mécanique des matériaux sous sollicitations cycliques. Ecole Nationale Supérieure d'Arts et Métiers, 2009.

I. Masquelier, Y. Marco, V. Le-saux, S. Calloch, and P. Charrier, Thermal Measurements on Elastomeric Materials: From the Characterization of the Dissipation Gradients to the Prediction of the Fatigue Properties, Procedia Engineering, vol.66, pp.661-668, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00949692

D. Mats, Determination of Fatigue Life of Composite Aircraft Structures by using Life and Load-Enhancement Factors, vol.20, 2016.

A. Maurel-pantel, E. Baquet, J. Bikard, J. Bouvard, and N. Billon, A thermo-mechanical large deformation constitutive model for polymers based on material network description: Application to a semi-crystalline polyamide 66, International Journal of Plasticity, vol.67, pp.102-126, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01083213

N. Mccormick and J. Lord, Digital Image Correlation, Materials Today, vol.13, pp.52-54, 2010.

A. Moghtaderi, P. Borgnat, and P. Flandrin, Trend filtering : Empirical Mode Decompositions versus l1 and Hodrick-Prescott, Advances in Adaptive Data Analysis 03, pp.41-61, 2011.

J. Montesano, Z. Fawaz, and H. Bougherara, Use of infrared thermography to investigate the fatigue behavior of a carbon fiber reinforced polymer composite, Composite Structures, vol.97, pp.76-83, 2013.

H. F. Moore and J. B. Kommers, Fatigue of metals under repeated stress, Chem. Met. Eng, 1921.

A. L. Moreira-braga, C. Diogo, and A. J. , Characterization of high performance polyamides blends for injection molding, 2014.

B. Mouhmid, Etude de l'endommagement et de la rupture d'un polyamide 66 chargé en fibres de verre courtes, 2007.

L. Muller, F. Pagano, M. Kaminski, J. Maire, and F. Leroy, On the difficulties to perform reliable analyses of fatigue tests on composites, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02420745

R. Munier, Etude de la fatigue des aciers lainés à partir de l'auto-échauffement sous sollicitation cyclique : essais, observations, modélisation et influence d'une pré-déformation plastique, 2012.

V. A. Muñoz-cuartas, Identification de mécanismes d'endommagement de stratifiés carboneépoxyde par couplage de l'émission acoustique et de la thermographie infrarouge, Génie civil et Procédés (Toulouse), 2015.

S. Mutlur, Thermal Analysis of Composites Using DSC, p.24, 2004.

M. Naderi and M. M. Khonsari, On the role of damage energy in the fatigue degradation characterization of a composite laminate, Composites Part B: Engineering, vol.45, pp.528-537, 2013.

M. Naderi, A. Kahirdeh, and M. M. Khonsari, Dissipated thermal energy and damage evolution of Glass/Epoxy using infrared thermography and acoustic emission, Composites Part B: Engineering, vol.43, pp.1613-1620, 2012.

F. Neveu, B. Castanié, and P. Olivier, The GAP methodology: A new way to design composite structures, Materials & Design, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02104764

T. Nué, Analyse des signaux d, 1996.

H. Obeid, A. Clément, S. Fréour, F. Jacquemin, and P. Casari, On the identification of the coefficient of moisture expansion of polyamide-6: Accounting differential swelling strains and plasticization, Mechanics of Materials, vol.118, pp.1-10, 2018.

J. Orteu, Mesure 3D de formes et de déformations par stéréovision, vol.16, 2002.

R. K. Pandit and D. Infield, Using Gaussian process theory for wind turbine power curve analysis with emphasis on the confidence intervals, 2017 6th International Conference on Clean Electrical Power (ICCEP), pp.744-749, 2017.

S. D. Pandita, G. Huysmans, M. Wevers, and I. Verpoest, Tensile fatigue behaviour of glass plain-weave fabric composites in on-and off-axis directions, Composites Part A: Applied Science and Manufacturing, vol.32, pp.1533-1539, 2001.

M. Pastor, Contribution à l'étude en fatigue de structures en aluminium renforcées par patchs composites, 2007.

G. Pitarresi and E. A. Patterson, A review of the general theory of thermoelastic stress analysis, The Journal of Strain Analysis for Engineering Design, vol.38, pp.405-417, 2003.

M. Poncelet, Multiaxialité, hétérogénéités intrinsèques et structurales des essais d'autoéchauffement et de fatigue à grand nombre de cycles, 2007.

P. Rabbe, H. Lieurade, and A. Galtier, Essais de fatigue -Partie I. Techniques de l'Ingénieur 25, 2000.

C. Rakotoarisoa, Prévision de la durée de vie en fatigue des composites à matrice organique tisses interlock, 2013.

, Ref NT -GSH -12/08C Banc d'étalonnage d'humidité GSH

K. Reifsnider and A. Talug, Analysis of fatigue damage in composite laminates, International Journal of Fatigue, vol.2, pp.3-11, 1980.

N. Revest, Comportement en fatigue de pièces épaisses en matériaux composites, 2011.

E. Ruffio, C. Pradere, A. Sommier, J. Batsale, A. Kusiak et al., Signal noise ratio improvement technique for bulk thermal diffusivity measurement, International Journal of Thermal Sciences, vol.129, pp.385-395, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02369477

A. Salerno, A. Costa, and G. Fantoni, Calibration of the thermoelastic constants for quantitative thermoelastic stress analysis on composites, Review of Scientific Instruments, vol.80, p.34904, 2009.

V. L. Saux, Fatigue et vieillissement des élastomères en environnements marin et thermique: de la caractérisation accélérée au calcul de structure, 2010.

J. Schneider, Mécanismes d'endommagement dans les composites tissés interlock, 2011.

W. Schültz, A history of fatigue, Engineering Fracture Mechanics, vol.38, 1996.

G. P. Sendeckyj, Life Prediction for Resin-Matrix Composite Materials, Composite Materials Series, K.L. Reifsnider, pp.431-483, 1991.

L. Serrano, Caractérisation thermomécanique du comportement en fatigue des thermoplastiques renforcés de fibres de verre courtes, 2015.

C. Shen and G. S. Springer, Moisture Absorption and Desorption of Composite Materials, Journal of Composite Materials, 1976.

L. Stainier, A Variational Approach to Modeling Coupled Thermo-Mechanical Nonlinear Dissipative Behaviors, Advances in Applied Mechanics, pp.69-126, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01007469

. Stanford, k-means algorithm, 2012.

C. E. Strohmeyer, The Determination of Fatigue Limits under Alternating Stress Conditions, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.90, pp.411-425, 1914.

R. Talreja, Assessment of the fundamentals of failure theories for composite materials, Composites Science and Technology, vol.105, pp.190-201, 2014.

J. Tang, S. Soua, C. Mares, and T. Gan, A Pattern Recognition Approach to Acoustic Emission Data Originating from Fatigue of Wind Turbine Blades, Sensors, p.17, 2017.

R. Tang, Y. Guo, and Y. J. Weitsman, An appropriate stiffness degradation parameter to monitor fatigue damage evolution in composites, International Journal of Fatigue, vol.26, pp.421-427, 2004.

L. Toubal, M. Karama, and B. Lorrain, Damage evolution and infrared thermography in woven composite laminates under fatigue loading, International Journal of Fatigue, vol.28, pp.1867-1872, 2006.

D. S. De-vasconcellos, F. Touchard, and L. Chocinski-arnault, Tension-tension fatigue behaviour of woven hemp fibre reinforced epoxy composite: A multi-instrumented damage analysis, International Journal of Fatigue, vol.59, pp.159-169, 2014.

E. Vauthier, J. C. Abry, T. Bailliez, and A. Chateauminois, Interactions between hygrothermal ageing and fatigue damage in unidirectional glass/epoxy composites, Composites Science and Technology, vol.58, pp.687-692, 1998.

L. Vergani, C. Colombo, and F. Libonati, A review of thermographic techniques for damage investigation in composites, Frattura Ed Integrità Strutturale, 2014.

G. Welter, Essais d'endurance par traction et compression. Wiadomoveci Instytutu Metalurgii i Metaloznawstwa, 1937.

O. Westphal, Analyse thermomécanique de l'endommagement en fatigue de stratifiés carbone/époxy: détermination de la limite d'endurance à partir d'essais d'auto-échauffement, 2014.

, Annexes Annexe 1 : Température de transition vitreuse en fonction de différents taux d'humidité relative

, Evolution de la phase, Annexe, vol.3