G. Andreescu, C. Coman, A. Moldovan, and I. Boldea, Stable v/f control system with unity power factor for pmsm drives, 2012 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM), p.432438, 2012.

L. Amet, M. Ghanes, and J. P. Barbot, Direct control based on sliding mode techniques for multicell serial chopper, Proceedings of the 2011 American Control Conference, p.751756, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00654246

R. P. Aguilera, P. Lezana, and D. E. Quevedo, Switched model predictive control for improved transient and steady-state performance, IEEE Transactions on Industrial Informatics, vol.11, p.968977, 2015.

A. T. Al-hammouri, L. Nordström, M. Chenine, L. Vanfretti, N. Honeth et al., Virtualization of synchronized phasor measurement units within real-time simulators for smart grid applications, IEEE Power and Energy Society General Meeting, issue.7, 2012.

R. P. Aguilera and D. E. Quevedo, Capacitor voltage estimation for predictive control algorithm of ying capacitor converters, 2009 IEEE International Conference on Industrial Technology, p.16, 2009.

O. Bethoux, J. P. Barbot, and M. Hilairet, Multicell actuator based on a sliding mode control, The European Physical Journal -Applied Physics, vol.43, p.217223, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00352636

K. Belda, Study of predictive control for permanent magnet synchronous motor drives, 17th International Conference on Methods Models in Automation Robotics (MMAR), p.522527, 2012.

R. Bensaid and M. Fadel, Sliding mode observer for multicell converters, IFAC Proceedings Volumes, vol.34, p.13191324, 2001.

J. Brychcín, D. Janík, T. Ko²an, and Z. Peroutka, Modulator for 4-level ying capacitor converter with balancing control in the closed loop, Transactions on Electrical Engineering, vol.5, p.6669, 2016.

B. Bossou, M. Karim, A. Lagrioui, and M. Taoussi, Fpga-based implementation nonlinear backstepping control of a pmsm drive, International Journal of Power Electronics and Drive System (IJ-PEDS, p.1223, 2014.

A. Bouarfa, Méthodes de commande par allocation de convertisseurs statiques polyphasés, multi-niveaux : De la modélisation à la mise en oeuvre temps-réel, 2017.

A. Binder, T. Schneider, and M. Klohr, Fixation of buried and surface-mounted magnets in high-speed permanent-magnet synchronous machines, IEEE Transactions on Industry Applications, vol.42, issue.4, p.10311037, 2006.

]. O. +-13, F. Benzineb, T. M. Taibi, M. S. Laleg-kirati, M. Boucherit et al., Control and fault diagnosis based sliding mode observer of a multicellular converter : Hybrid approach, Journal of Electrical Engineering, vol.64, issue.1, p.2030, 2013.

T. K. Chakraborty, Steady state analysis of an inverter fed synchronous motor, Journal of PU, vol.2, issue.2, p.7883, 2013.

C. X. Chen, Y. X. Xie, and Y. H. Lan, Backstepping control of speed sensorless permanent magnet synchronous motor based on slide model observer, International Journal of Automation and Computing, vol.12, issue.2, p.149155, 2015.

P. Djondiné, J. P. Barbot, and M. Ghanes, Nonlinear phenomena study in serial multicell chopper. IFAC-PapersOnLine, vol.48, pp.105-110, 2015.

P. Djondiné, J. P. Barbot, and M. Ghanes, Comparison of sliding mode and petri nets control for multicellular chopper, International Journal of Nonlinear Science, vol.25, p.6775, 2018.

R. Delpoux, L. Hetel, and A. Kruszewski, Permanent magnet synchronous motor control via parameter dependent relay control, 2014 American Control Conference, p.52305235, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00957800

Z. Ding, G. Wei, and X. Ding, Speed identication and control for permanent magnet synchronous motor via sliding mode approach

, Systems Science and Control Engineering, vol.2, issue.1, p.161167, 2014.

Y. Errami, M. Ouassaid, M. Cherkaoui, and M. Maarou, Maximum power point tracking control based on a nonlinear backstepping approach for a permanent magnet synchronous generator wind energy conversion system connected to a utility grid, Energy Technology, vol.3, p.743757, 2015.

A. M. El-refaie and T. M. Jahns, Comparison of synchronous pm machine types for wide constant-power speed range operation, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, vol.2, p.10151022, 2005.

M. Ghanes, F. Bejarano, and J. P. Barbot, On sliding mode and adaptive observers design for multicell converter, American Control Conference, p.21342139, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00654257

G. Gateau, M. Fadel, P. Maussion, R. Bensaid, and T. A. Meynard, Multicell converters : Active control and observation of yingcapacitor voltages, IEEE Transactions on Industrial Electronics, vol.49, issue.5, p.9981008, 2002.

R. George and A. S. Mathew, Speed control of pmsm using backstepping method, International Journal of Engineering Research and Technology, vol.4, p.609612, 2015.

R. Goyet, C. Nasr, and C. Glaise, Expérimentation d'un ensemble machine à réluctance variable-convertisseur à extinction forcée-150kw-500 tours/min-200hz, Revue Phys. Appl, vol.22, p.359366, 1987.

M. Ghanes, M. Trabelsi, H. Abu-rub, and L. Ben-brahim, Robust adaptive observer-based model predictive control for multilevel ying capacitors inverter, IEEE Transactions on Industrial Electronics, vol.63, issue.12, p.78767886, 2016.

M. Ghanes, M. Trabelsi, X. Lin-shi, J. P. Barbot, J. M. Retif et al., High gain observer for a three-cell chopper : Design and experimental results, International Journal of Robust and Nonlinear Control, vol.24, issue.06, p.10901103, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00923689

M. A. Hamida, A. Glumineau, and J. De-leon, Robust integral backstepping control for sensorless ipm synchronous motor controller, Journal of the Franklin Institute, vol.349, issue.5, p.17341757, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00692143

L. H. Hoang, Etude de la commande numérique par microprocesseur d'une machine synchrone autopilotée alimentée en courant, 1980.

S. H. Hosseini, A. K. Sadig, and A. Shari, Estimation of ying capacitors voltages in multicell converters, 6th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, vol.1, p.113, 2009.

J. Hostettler and X. Wang, Sliding mode control of a permanent magnet synchronous generator for variable speed wind energy conversion systems, 2015 American Control Conference (ACC), p.49824987, 2015.

K. Hemici, A. Zegaoui, A. Bokhtache, M. O. Mahmoudi, and M. Aillerie, Three-phases ying-capacitor multilevel inverter with proportional natural pwm control, Energy Procedia, vol.74, p.10611070, 2015.

C. B. Jacobina and M. Grandpierre, A self-controlled synchronous motor using a ltering technique of the terminal voltage, International Conference on Electrical Machines, p.764767, 1986.

A. K. Jebai, F. Malrait, P. Martin, and P. Rouchon, Estimation of saturation of permanent-magnet synchronous motors through an energy-based model, IEEE International Electric Machines and Drives Conference, p.13161321, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00638457

A. K. Jebai, F. Malrait, P. Martin, and P. Rouchon, Signal injection and averaging for position estimation of permanent-magnet synchronous motors, 51st IEEE Conference on Decision and Control, p.76087613, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00787794

C. Sheeba-joice and P. Nivedhitha, Simulation of speed control of brushless dc motor, with fuzzy logic controller, International Journal of Electrical, Electronics and Data Communication, vol.2, p.2429, 2014.

W. Kang, J. P. Barbot, and L. Xu, On the Observability of Nonlinear and Switched Systems, 2009.
URL : https://hal.archives-ouvertes.fr/inria-00533451

A. Kheloui, Contribution à la modélisation et à la commande d'ensembles convertisseurs statiques -machines synchrones, 1994.

I. Kanellakopoulos, P. V. Kokotovic, and A. S. Morse, Systematic design of adaptive controllers for feedback linearizable systems, IEEE Transactions on Automatic Control, vol.36, issue.11, p.12411253, 1991.

M. Kiuchi, T. Ohnishi, H. Hagiwara, and Y. Yasuda, V/f control of permanent magnet synchronous motors suitable for home appliances by dc-link peak current control method, The 2010 International Power Electronics Conference -ECCE ASIA, p.567573, 2010.

M. Khazraei, H. Sepahvand, K. Corzine, and M. Ferdowsi, A generalized capacitor voltage balancing scheme for ying capacitor multilevel converters, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition, p.5862, 2010.

J. Liantao, W. Deshun, Y. Bin, Z. Shanglin, K. Ailiang et al., Research on constant frequency electrical angle start method of lci, Advanced Materials Research, vol.1070, p.12581262, 2014.

S. Laamiri, M. Ghanes, L. Amet, and G. Santomenna, Direct control strategy for a three phase eight-level ying-capacitor inverter, IFAC-PapersOnLine, vol.50, issue.1, pp.15786-15791, 2017.

S. Laamiri, M. Ghanes, and G. Santomenna, Commande de la machine synchrone alimentée par deux convertisseurs statiques à thyristors, 6 èmes Journées Doctorales / Journées Nationales MACS 2015, 2015.

S. Laamiri, M. Ghanes, and G. Santomenna, Observer based direct control strategy for a multi-level three phase ying-capacitor inverter, IFAC Control Engineering Practice, vol.86, pp.155-165, 2019.

S. Laamiri, M. Ghanes, G. Santomenna, and J. Deleon, Forced commutation for fed current self controlled synchronous motor, 2015 IEEE Conference on Control Applications (CCA), vol.864, p.869, 2015.

J. Lygeros, K. H. Johansson, S. N. Simic, and S. S. Sastry, Dynamical properties of hybrid automata, IEEE Transactions on Automatic Control, vol.48, issue.1, p.217, 2003.

A. Lagrioui and H. Mahmoudi, Nonlinear adaptive backstepping control of permanent magnet synchronous motor (pmsm), Journal of Theoretical and Applied Information Technology, vol.29, issue.1, p.19, 2011.

P. Ladoux, M. Machmoum, and C. Batard, Harmonic currents compensation for 1.5 kv dc railway substations, International Review of Electrical Engineering, vol.4, issue.3, p.380391, 2009.

P. Lezana, J. Rodriguez, and D. A. Oyarzun, Cascaded multilevel inverter with regeneration capability and reduced number of switches, IEEE Transactions on Industrial Electronics, vol.55, issue.3, pp.1059-1066, 2008.

Y. H. Lan and L. Zhou, Backstepping control with disturbance observer for permanent magnet synchronous motor, Journal of Control Science and Engineering, p.18, 2018.

T. A. Meynard and H. Foch, Multi-level conversion : high voltage choppers and voltage source inverters, 23rd Annual IEEE Power Electronics Specialists Conference, p.397403, 1992.

T. A. Meynard, H. Foch, F. Forest, C. Turpin, F. Richardeau et al., Multicell converters : derived topologies, IEEE Transactions on Industrial Electronics, vol.49, issue.5, pp.978-987, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00327075

S. Mirchevski, Energy eciency in electric drives, Electronics ETF, vol.16, issue.1, pp.46-49, 2012.

S. Mohamadian and M. H. Khanzade, A ve-level current-source inverter for grid-connected or high-power three-phase wound-eld synchronous motor drives. Engineering, Technology and Applied Science Research, vol.6, issue.5, p.11391148, 2016.

S. Mohamadian, M. H. Khanzade, S. Castellan, and A. Tessarolo, Lci-fed wound-eld synchronous motors : A technology status review and new development trends, 2014 AEIT Annual Conference -From Research to Industry : The Need for a More Eective Technology Transfer (AEIT), p.16, 2014.

F. Mehedi, L. Nezli, M. O. Mahmoudi, and R. Taleb, Robust speed control of ve-phase permanent magnet synchronous motor using super-twisting sliding mode control, vol.20, p.649657, 2017.

P. Niazi, Permanent magnet assisted synchronous reluctance motor design and performance improvement, 2005.

A. B. Plunkett and F. G. Turnbull, Load-commutated inverter/synchronous motor drive without a shaft position sensor, IEEE Transactions on Industry Applications, IA, vol.15, issue.1, p.6371, 1979.

J. M. Rolland, S. Astier, L. Protin, C. Masselot, M. Lajoie-mazenc et al., Modélisation analytique d'un système de pompage photovoltaîque utilisant une machine synchrone à commutation naturelle : fonctionnement optimal et critères de constitution, 2012 Annual IEEE India Conference (INDICON), vol.23, p.10721077, 1988.

P. C. Sen, Electric motor drives and control-past, present, and future, IEEE Transactions on Industrial Electronics, vol.37, issue.6, p.562575, 1990.

J. Shao, Direct Back EMF Detection Method for Sensorless Brushless DC (BLDC) Motor Drives, 2003.

A. K. Sadigh, S. H. Hosseini, M. Sabahi, and G. B. Gharehpetian, Double ying capacitor multicell converter based on modied phaseshifted pulsewidth modulation, IEEE Transactions on Power Electronics, vol.25, issue.6, p.15171526, 2010.

Q. Song and C. Jia, Robust speed controller design for permanent magnet synchronous motor drives based on sliding mode control, Energy Procedia, vol.88, p.867873, 2016.

R. L. Steigerwald and T. A. Lipo, Analysis of a novel forcedcommutation starting scheme for a load-commutated synchronous motor drive, IEEE Transactions on Industry Applications, IA, vol.15, issue.1, p.1424, 1979.

. Bibliographie,

P. Stolze, P. Landsmann, R. Kennel, and T. Mouton, Finite-set model predictive control of a ying capacitor converter with heuristic voltage vector preselection, 8th International Conference on Power Electronics -ECCE Asia, p.210217, 2011.

E. I. Silva, B. P. Mcgrath, D. E. Quevedo, and G. C. Goodwin, Predictive control of a ying capacitor converter, American Control Conference, p.37633768, 2007.

I. F. Soran, Synchronous motor fed by current inverter : Hybrid model and its required parameters, Workshop on Electrical Machines' Parameters, p.1924, 2001.

R. Stala, S. Pirog, M. Baszynski, A. Mondzik, A. Penczek et al., Results of investigation of multicell converters with balancing circuitpart i, IEEE Transactions on Industrial Electronics, vol.56, issue.7, p.26102619, 2009.

S. Ben-said, K. B. Saad, and M. Benrejeb, Sliding mode control for a multicell converter, In World Academy of Science, Engineering and Technology, vol.76, p.785790, 2013.

B. Singh, B. P. Singh, and S. Dwivedi, A state of art on different congurations of permanent magnet brushless machines, IE(I) Journal-EL, vol.87, p.6373, 2006.

A. Tessarolo, C. Bassi, G. Ferrari, D. Giulivo, R. Macuglia et al., Investigation into the high-frequency limits and performance of load commutated inverters for high-speed synchronous motor drives, IEEE Transactions on Industrial Electronics, vol.60, issue.6, p.21472157, 2013.

I. Takahashi and T. Noguchi, A new quick-response and higheciency control strategy of an induction motor, IEEE Transactions on Industry Applications, IA, vol.22, issue.5, p.820827, 1986.

Z. Wang, K. Lu, and F. Blaabjerg, A simple startup strategy based oncurrent regulation for back-emf based sensorless control of pmsm

B. Wu, J. Pontt, J. Rodríguez, S. Bernet, and S. Kouro, Current-source converter and cycloconverter topologies for industrial medium-voltage drives, IEEE Transactions on Industrial Electronics, vol.27, issue.8, p.27862797, 2008.

B. J. Wang and J. J. Wang, Sliding mode control of surface-mount permanent-magnet synchronous motor based on error model with unknown load, Journal of Software, vol.6, issue.5, p.819825, 2011.