N. Abid, M. Mirkhalaf, and F. Barthelat, Discrete-element modeling of nacrelike materials: Effects of random microstructures on strain localization and mechanical performance, Journal of the Mechanics and Physics of Solids, vol.112, pp.385-402, 2018.

N. Abid, J. W. Pro, and F. Barthelat, Fracture mechanics of nacre-like materials using discrete-element models: Effects of microstructure, interfaces and randomness, Journal of the Mechanics and Physics of Solids, vol.124, p.103, 2019.

I. Agnolin and J. N. Roux, Internal states of model isotropic granular packings. I. Assembling process, geometry, and contact networks, Physical Review E -Statistical, Nonlinear, and Soft Matter Physics, vol.76, p.57, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00148554

S. Alexander, Visualization and analysis of atomistic simulation data with OVITO-the open Visualization Tool, p.158, 2010.

, Fracture Mechanics TextBook. Ttaylor and Francis, vol.87, 2005.

D. André, I. Iordanoff, J. Charles, and J. Néauport, Discrete element method to simulate continuous material by using the cohesive beam model, Computer Methods in Applied Mechanics and Engineering, pp.113-125, 2012.

D. André, M. Jebahi, I. Iordanoff, J. Charles, and J. Néauport, Using the discrete element method to simulate brittle fracture in the indentation of a silica glass with a blunt indenter, Computer Methods in Applied Mechanics and Engineering, vol.265, p.56, 2013.

S. Askarinejad and N. Rahbar, Toughening mechanisms in bioinspired multilayered materials, Journal of The Royal Society Interface, vol.12, issue.102, pp.20140855-20140855, 2014.

H. Bai, F. Walsh, B. Gludovatz, B. Delattre, C. Huang et al., Bioinspired Hydroxyapatite/Poly(methyl methacrylate) Composite with a Nacre-Mimetic Architecture by a Bidirectional Freezing Method, Advanced Materials, vol.28, issue.1, p.104, 2016.

B. Bar-on and H. D. Wagner, New insights into the Young's modulus of staggered biological composites, Materials Science and Engineering C, vol.33, issue.2, pp.603-607, 2013.

F. Barthelat, Designing nacre-like materials for simultaneous stiffness, strength and toughness: Optimum materials, composition, microstructure and size, Journal of the Mechanics and Physics of Solids, vol.33, p.98, 2014.

F. Barthelat and H. D. Espinosa, An experimental investigation of deformation and fracture of nacre-mother of pearl, Experimental Mechanics, vol.47, issue.3, p.81, 2007.

F. Barthelat, C. M. Li, C. Comi, and H. D. Espinosa, Mechanical properties of nacre constituents and their impact on mechanical performance, Journal of Materials Research, vol.21, issue.8, pp.1977-1986, 2006.

F. Barthelat and R. Rabiei, Toughness amplification in natural composites, Journal of the Mechanics and Physics of Solids, vol.59, issue.4, p.53, 2011.

F. Barthelat, H. Tang, P. D. Zavattieri, C. M. Li, and H. D. Espinosa, On the mechanics of mother-of-pearl: A key feature in the material hierarchical structure, Journal of the Mechanics and Physics of Solids, vol.55, issue.2, pp.306-337, 2007.

F. Barthelat, Z. Yin, and M. J. Buehler, Structure and mechanics of interfaces in biological materials, Nat. Rev. Mater, vol.1, issue.4, p.16007, 2016.

M. R. Begley, N. R. Philips, B. G. Compton, D. V. Wilbrink, R. O. Ritchie et al., Micromechanical models to guide the development of synthetic 'brick and mortar' composites, Journal of the Mechanics and Physics of Solids, vol.60, issue.8, p.88, 2012.

S. Bekah, R. Rabiei, and F. Barthelat, The Micromechanics of Biological and Biomimetic Staggered Composites, Journal of Bionic Engineering, vol.9, issue.4, pp.446-456, 2012.

. Bibliography,

K. Bertoldi, D. Bigoni, and W. J. Drugan, Nacre: An orthotropic and bimodular elastic material, Composites Science and Technology, vol.68, issue.6, p.63, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00499006

L. J. Bonderer, A. R. Studart, and L. J. Gauckler, Bioinspired Design and Assembly of Platelet Reinforced Polymer Films, Science, vol.34, issue.5866, pp.1069-1073, 2008.

V. Boulos, V. Fristot, D. Houzet, L. Salvo, and P. Lhuissier, Investigating performance variations of an optimized GPU-ported granulometry algorithm, Conference on Design and Architectures for Signal and Image Processing, pp.36-41, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00787861

F. Bouville, E. Maire, and S. Deville, Self-assembly of faceted particles triggered by a moving ice front, Langmuir, vol.30, issue.29, pp.8656-8663, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01133186

F. Bouville, E. Maire, S. Meille, A. J. Stevenson, and S. Deville, Strong, tough and sti bioinspired ceramics from brittle constituents, Nature Materials, vol.13, issue.86, p.99, 2014.

A. Burr, Investigation of pore closure during polar firn densification Étude de la fermeture des pores lors de la densification du névé polaire, p.43, 2017.

P. Calvert, Biomimetic ceramics and hard composites, Biomimetic Design and Processing of Materials, p.14, 1995.

M. Camborde and . Donzé, Numerical study if rock and concrete behavior by discrete element modelling, Computers and Geotechnics, vol.27, p.43, 2000.

M. G. Cambridge, Ces edupack database, 2017.

H. A. Carmona, F. K. Wittel, F. Kun, and H. J. Herrmann, Fragmentation processes in impact of spheres, Physical Review E -Statistical, Nonlinear, and Soft Matter Physics, vol.77, issue.5, pp.1-10, 2008.

Y. Chang, R. Bermejo, and G. L. Messing, Improved fracture behavior of alumina microstructural composites with highly textured compressive layers, Journal of the American Ceramic Society, vol.97, issue.11, pp.3643-3651, 2014.

B. Chareyre, The Discrete Element Method for Granular Solids, vol.83, 2019.

P. Chen, .. Y. Lin, Y. Lin, Y. Seki, .. G. Stokes et al., Structure and mechanical properties of selected biological materials, J. Mech. Behav. Biomed. Mater, vol.1, issue.3, pp.208-234, 2008.

R. K. Chintapalli, M. Mirkhalaf, A. K. Dastjerdi, and F. Barthelat, Fabrication, testing and modeling of a new flexible armor inspired from natural fish scales and osteoderms, Bioinspiration & biomimetics, vol.3, issue.9, 2014.

H. Cho, Y. Tokoi, S. Tanaka, T. Suzuki, W. Jiang et al., Facile Orientation of Unmodified BN Nanosheets in polysiloxane/BN Composite Films Using a High Magnetic Field, Journal of Materials Science, vol.46, p.131, 2010.

J. Christoffersen, M. M. Mehrabadi, and S. Nemat-nasser, A Micromechanical Description of Granular Material Behavior, Journal of Applied Mechanics, vol.48, issue.2, p.339, 1981.

I. Corni, T. J. Harvey, J. A. Wharton, K. R. Stokes, F. C. Walsh et al., , 2012.

, Bioinspiration & Biomimetics, vol.7, issue.3, p.31001

H. L. Cox, The elasticity and strength of paper and other fibrous materials, British journal of applied physics, vol.30, issue.72, p.3, 1952.

P. A. Cundall and O. D. Strack, A discrete numerical model for granular assemblies, Géotechnique, vol.29, issue.1, p.57, 1979.

R. B. Cundall, R. Rudham, and M. S. Salim, Photocatalytic oxidation of propan-2-ol in the liquid phase by rutile, Journal of the Chemical Society, Faraday Transactions, vol.1, p.42, 1976.

J. D. Currey, Mechanical Properties of Mother of Pearl in Tension Articles citing this article, Proc.R.Soc.Lond.B, vol.196, pp.443-463, 1977.

P. Davidson and M. Waas, Non-smooth mode I fracture of fibre-reinforced composites: an experimental, numerical and analytical study, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.87, pp.1942-1965, 2011.

. Bibliography,

B. V. Derjaguin, V. M. Muller, and Y. P. Toporov, Effect of contact deformations on the adhesion of particles, Progress in Surface Science, vol.45, pp.131-143, 1994.

S. Deville, E. Saiz, and A. P. Tomsia, Ice-templated porous alumina structures, Acta Materialia, vol.55, issue.6, p.16, 2007.
URL : https://hal.archives-ouvertes.fr/hal-01785728

H. B. Dhia and G. Rateau, The Arlequin method as a flexible engineering design tool, International Journal for Numerical Methods in Engineering, vol.62, issue.11, p.47, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00018915

L. S. Dimas, G. H. Bratzel, I. Eylon, and M. J. Buehler, Tough composites inspired by mineralized natural materials: Computation, 3D printing, and testing, Advanced Functional Materials, vol.23, issue.36, pp.4629-4638, 2013.

L. S. Dimas and M. J. Buehler, Tough and stiff composites with simple building blocks, Journal of Materials Research, vol.28, issue.10, pp.1295-1303, 2013.

F. Dubois and F. Radjai, Discrete-element Modeling of Granular Materials, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00691805

H. D. Espinosa, A. L. Juster, F. J. Latourte, O. Y. Loh, D. Gregoire et al., Tablet-level origin of toughening in abalone shells and translation to synthetic composite materials, Nature Communications, vol.2, issue.1, p.103, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00565401

H. D. Espinosa, J. E. Rim, F. Barthelat, and M. J. Buehler, Merger of structure and material in nacre and bone -Perspectives on de novo biomimetic materials, Progress in Materials Science, vol.54, issue.8, pp.1059-1100, 2009.

A. G. Evans, Z. Suo, R. Z. Wang, I. A. Aksay, M. Y. He et al., Model for the robust mechanical behavior of nacre, Journal of Materials Research, vol.16, issue.09, pp.2475-2484, 2001.

E. Feilden, T. Giovannini, N. Ni, C. Ferraro, E. Saiz et al., Micromechanical strength of individual Al2O3 platelets, Scripta Materialia, vol.131, pp.55-58, 2017.

Q. Feng, F. Cui, G. Pu, R. Wang, and H. Li, Crystal orientation, toughening mechanisms and a mimic of nacre, Materials Science and Engineering C, vol.11, p.82, 2000.

T. Fujihara, H. Cho, T. Nakayama, T. Suzuki, W. Jiang et al., Field-Induced Orientation of Hexagonal Boron Nitride Nanosheets Using Microscopic Mold for Thermal Interface Materials, Journal of the American Ceramic Society, vol.95, p.131, 2012.

H. Gao, Application of fracture mechanics concepts to hierarchical biomechanics of bone and bone-like materials, International Journal of Fracture, vol.138, issue.1-4, p.37, 2006.

H. Gao, B. Ji, I. L. Jager, E. Arzt, and P. Fratzl, Materials become insensitive to flaws at nanoscale: Lessons from nature, Proceedings of the National Academy of Sciences, vol.100, issue.10, p.34, 2003.

J. Gaume, A. Van-herwijnen, G. Chambon, K. W. Birkeland, and J. Schweizer, Modeling of crack propagation in weak snowpack layers using the discrete element method, Cryosphere, vol.9, issue.5, p.43, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01273404

M. Grossman, F. Bouville, F. Erni, K. Masania, R. Libanori et al., , 2017.

, Mineral Nano-Interconnectivity Stiffens and Toughens Nacre-like Composite Materials

, Advanced Materials, vol.29, issue.8, pp.1-7

M. Grossman, F. Bouville, K. Masania, and A. R. Studart, Quantifying the role of mineral bridges on the fracture resistance of nacre-like composites, vol.50, pp.24-28, 2018.

G. X. Gu, F. Libonati, S. D. Wettermark, and M. J. Buehler, Printing nature: Unraveling the role of nacre's mineral bridges, Journal of the Mechanical Behavior of Biomedical Materials, vol.76, pp.135-144, 2017.

S. Heid-jorgensen and M. K. Budzik, Effects of bondline discontinuity during growth of interface cracks including stability and kinetic considerations, Journal of the Mechanics and Physics of Solids, vol.117, pp.1-21, 2018.

J. Henzie, M. Grünwald, A. Widmer-cooper, P. L. Geissler, and P. Yang, Self-Assembly of Uniform Polyhedral Silver Nanocrystals into Densest Packings and Exotic Superlattices, Nature Materials, vol.11, p.143, 2012.

H. Hertz, Ueber die Beruhrung fester elastischer Korper, J reine angew Math, vol.92, p.44, 1882.

T. Hiroshi, C. , P. P. George, and I. R. , The stress analysis of cracks handbook. Unknown, asme press edition, p.86, 1985.

. Bibliography,

M. Z. Hossain, C. Hsueh, B. Bourdin, and K. Bhattacharya, Effective toughness of heterogeneous media, Journal of the Mechanics and Physics of Solids, vol.71, pp.15-32, 2014.

A. P. Jackson, J. F. Vincent, and R. M. Turner, The Mechanical Design of Nacre, Proceedings of the Royal Society B: Biological Sciences, vol.234, pp.415-440, 1277.

I. Jäger and P. Fratzl, Mineralized collagen fibrils: A mechanical model with a staggered arrangement of mineral particles, Biophysical Journal, vol.79, issue.4, p.37, 2000.

D. Jauffrès, X. Liu, and C. L. Martin, Tensile strength and toughness of partially sintered ceramics using discrete element simulations, Engineering Fracture Mechanics, vol.103, p.75, 2013.

D. Jauffrès, C. L. Martin, A. Lichtner, and R. K. Bordia, Simulation of the elastic properties of porous ceramics with realistic microstructure. Modelling and Simulation in, Materials Science and Engineering, vol.20, issue.4, p.53, 2012.

M. Jebahi, D. André, F. Dau, J. L. Charles, and I. Iordanoff, Simulation of Vickers indentation of silica glass, Journal of Non-Crystalline Solids, vol.378, p.47, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00909724

J. F. Jerier and J. F. Molinari, Normal contact between rough surfaces by the Discrete Element Method, Tribology International, vol.47, p.58, 2012.

B. Ji and H. Gao, Mechanical properties of nanostructure of biological materials, Journal of the Mechanics and Physics of Solids, vol.52, issue.9, pp.1963-1990, 2004.

L. Johnson, K. Kendall, K. Roberts, and A. D. , Surface energy and the contact of elastic solids, Proceedings of the royal society of London.A. mathematical and physical sciences, pp.301-313, 1971.

J. B. Johnson and M. A. Hopkins, Identifying microstructural deformation mechanisms in snow using discrete-element modeling, Journal of Glaciology, vol.51, issue.174, p.43, 2005.

D. Katti and K. Katti, Modeling microarchitecture and mechanical behavior of nacre using 3D finite element techniques Part I Elastic properties, Journal of Materials Science, vol.6, p.41, 2001.

K. S. Katti, D. R. Katti, S. M. Pradhan, and A. Bhosle, Platelet interlocks are the key to toughness and strength in nacre, Journal of Materials Research, vol.20, issue.05, pp.1097-1100, 2005.

R. Kawamoto, E. Andò, G. Viggiani, and J. E. Andrade, All you need is shape: Predicting shear banding in sand with LS-DEM, Journal of the Mechanics and Physics of Solids, vol.111, pp.375-392, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01665568

B. Kim and W. J. Weiss, Using acoustic emission to quantify damage in restrained fiber-reinforced cement mortars, Cement and Concrete Research, vol.33, issue.2, p.149, 2003.

S. P. Kotha, Y. Li, and N. Guzelsu, Micromechanical model of nacre tested in tension, Journal of Materials Science, vol.36, issue.8, p.37, 2001.

R. Kumar, S. Rommel, D. Jauffrès, P. Lhuissier, and C. L. Martin, Effect of packing characteristics on the discrete element simulation of elasticity and buckling, International Journal of Mechanical Sciences, vol.110, p.156, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01367851

M. E. Launey, E. Munch, D. H. Alsem, H. B. Barth, E. Saiz et al., Designing highly toughened hybrid composites through natureinspired hierarchical complexity, Acta Materialia, vol.57, issue.10, pp.2919-2932, 2009.

M. E. Launey, E. Munch, D. H. Alsem, E. Saiz, A. P. Tomsia et al., A novel biomimetic approach to the design of high-performance ceramic -Metal composites, Journal of the Royal Society Interface, vol.7, issue.46, p.17, 2010.

M. E. Launey and R. O. Ritchie, On the fracture toughness of advanced materials, Advanced Materials, vol.21, issue.20, p.82, 2009.

L. Ferrand, H. Bouville, F. Niebel, T. P. Studart, and A. R. , Magnetically assisted slip casting of bioinspired heterogeneous composites, Nat. Mater, vol.14, pp.1-17, 2015.

L. Ferrand, H. Bouville, F. Studart, and A. , Design principles for textured multilayered composites using magnetically assisted slip casting, pp.1-20, 2018.

. Bibliography,

W. Leclerc, Discrete Element Method to simulate the elastic behavior of 3D heterogeneous continuous media W, International Journal of Solids and Structures, vol.47, p.53, 2017.

W. Leclerc, H. Haddad, and M. Guessasma, International Journal of Solids and Structures On the suitability of a Discrete Element Method to simulate cracks initiation and propagation in heterogeneous media, International Journal of Solids and Structures, vol.108, pp.98-114, 2016.

X. Li, Nanoscale structural and mechanical characterization of natural nanocomposites: Seashells, Jom, vol.59, issue.3, pp.71-74, 2004.

Z. Lin, Y. Liu, S. Raghavan, K. Moon, S. K. Sitaraman et al., Magnetic Alignment of Hexagonal Boron Nitride Platelets in Polymer Matrix: Toward High Performance Anisotropic Polymer Composites for Electronic Encapsulation, ACS Applied Materials & Interfaces, vol.5, p.131, 2013.

L. Maheo, F. Dau, D. André, J. L. Charles, and I. Iordanoff, Composites : Part B A promising way to model cracks in composite using Discrete Element Method, Composites Part B, vol.71, p.55, 2015.

C. L. Martin, Elasticity, fracture and yielding of cold compacted metal powders, J. Mech. Phys. Solids, vol.52, p.99, 2004.

C. L. Martin and R. K. Bordia, Influence of adhesion and friction on the geometry of packings of spherical particles, Phys. Rev. E, vol.77, p.58, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00374782

C. L. Martin, D. Bouvard, and G. Delette, Discrete element simulations of the compaction of aggregated ceramic powders, Journal of the American Ceramic Society, vol.89, issue.11, p.43, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00141815

C. L. Martin, D. Bouvard, and S. Shima, Study of particle rearrangement during powder compaction by the Discrete Element Method, Journal of the Mechanics and Physics of Solids, vol.51, p.99, 2003.

M. A. Meyers, P. Chen, A. Y. Lin, .. Seki, and Y. , Biological materials: Structure and mechanical properties, Progress in Materials Science, vol.53, issue.1, p.13, 2008.

N. Moes, J. Dolbow, and T. E. Belytschko, A Finite Element Method for Crack Growth Without Remeshing, International Journal for Numerical Methods in Engineering, vol.46, p.43, 1999.
URL : https://hal.archives-ouvertes.fr/hal-01004829

E. Munch, M. E. Launey, D. H. Alsem, E. Saiz, A. P. Tomsia et al., Tough, bio-inspired hybrid materials, Science, vol.322, issue.5907, p.23, 2008.

V. Naglieri, B. Gludovatz, A. Tomsia, and R. Ritchie, Developing strength and toughness in bio-inspired silicon carbide hybrid materials containing a compliant phase, 2015.

, Acta Materialia, vol.98, pp.141-151

Z. Néda, R. Florian, and Y. Brechet, Reconsideration of continuum percolation of isotropically oriented sticks in three dimensions, Physical Review E -Statistical Physics, Plasmas, Fluids, and Related Interdisciplinary Topics, vol.59, p.135, 1999.

A. Needleman and V. Tvergaard, An analysis of dynamic, ductile crack growth in a double edge cracked specimen, International Journal of Fracture, vol.49, issue.1, p.103, 1991.

Y. Ni, Z. Song, H. Jiang, S. H. Yu, and L. He, Optimization design of strong and tough nacreous nanocomposites through tuning characteristic lengths, Journal of the Mechanics and Physics of Solids, vol.81, p.82, 2015.

T. P. Niebel, F. Bouville, D. Kokkinis, and A. R. Studart, Role of the polymer phase in the mechanics of nacre-like composites, Journal of the Mechanics and Physics of Solids, p.82, 2016.

P. K. Nukala, S. Zapperi, and S. Åimunovi?, Statistical properties of fracture in a random spring model, Nonlinear, and Soft Matter Physics, vol.71, issue.6, pp.1-11, 2005.

Y. Oaki, A. Kotachi, T. Miura, and H. Imai, Bridged nanocrystals in biominerals and their biomimetics: Classical yet modern crystal growth on the nanoscale, Advanced Functional Materials, vol.16, issue.12, pp.1633-1639, 2006.

O. Oner-ekiz, A. F. Dericioglu, and H. Kakisawa, An efficient hybrid conventional method to fabricate nacre-like bulk nano-laminar composites, Materials Science and Engineering C, vol.29, issue.6, p.82, 2009.

R. Pavlacka, R. Bermejo, Y. Chang, D. J. Green, and G. L. Messing, Fracture behavior of layered alumina microstructural composites with highly textured layers, Journal of the American Ceramic Society, vol.96, issue.5, pp.1577-1585, 2013.

P. I. Pelissari, F. Bouville, V. C. Pandolfelli, D. Carnelli, F. Giuliani et al., Nacre-like ceramic refractories for high temperature applications, Journal of the European Ceramic Society, vol.38, issue.4, p.99, 2017.

T. Poschel and S. Thomas, Computational granular dynamics: models and algorithms, p.42, 2005.

D. O. Potyondy and P. A. Cundall, A bonded-particle model for rock, International Journal of Rock Mechanics & Mining Sciences, vol.41, pp.1329-1364, 2004.

R. Rabiei, S. Bekah, and F. Barthelat, Failure mode transition in nacre and bone-like materials, Acta Biomaterialia, vol.6, issue.10, p.104, 2010.

K. Radi, D. Jauffrès, S. Deville, and C. L. Martin, Elasticity and fracture of brick and mortar materials with discrete elements simulations, Journal of the Mechanics and Physics of Solids, vol.126, p.104, 2019.

K. Radi, D. Jauffres, S. Deville, and C. L. Martin, Strength and toughness tradeoff optimization of nacre-like ceramic composites, Composites Part B, p.79, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02441786

T. Rasp, T. Kraft, and H. Riedel, Discrete element study on the influence of initial coordination numbers on sintering behaviour, Scripta Materialia, vol.69, p.43, 2013.

S. P. Ray, Preparation and Characterization of Aluminum Borate, Journal of the American Ceramic Society, vol.75, issue.9, p.75, 1992.

R. O. Ritchie, The conflicts between strength and toughness, Nature Materials, vol.10, issue.11, pp.817-822, 2011.

R. O. Ritchie, M. J. Buehler, and P. Hansma, Plasticity and toughness in bone, p.81, 2009.

D. Roussel, A. Lichtner, D. Jauffrès, J. Villanova, R. K. Bordia et al., Strength of hierarchically porous ceramics: Discrete simulations on X-ray nanotomography images, vol.113, p.183, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01381870

W. Saeys, S. Vanmaercke, P. Van-liedekerke, H. Van-oosterwyck, T. Odenthal et al., Modeling contact interactions between triangulated rounded bodies for the discrete element method, Computer Methods in Applied Mechanics and Engineering, vol.277, p.42, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00999663

T. E. Schäffer, C. Ionescu-zanetti, R. Proksch, M. Fritz, D. A. Walters et al., Does Abalone Nacre Form by Heteroepitaxial Nucleation or by Growth through Mineral Bridges?, Chemistry of Materials, vol.9, issue.8, p.14, 1997.

L. Scholtès and F. Donzé, A DEM model for soft and hard rocks: Role of grain interlocking on strength, Journal of the Mechanics and Physics of Solids, vol.61, issue.2, p.58, 2013.

D. Sen and M. J. Buehler, Structural hierarchies define toughness and defecttolerance despite simple and mechanically inferior brittle building blocks, Scientific Reports, vol.1, p.53, 2011.

Y. Shao, H. P. Zhao, and X. Q. Feng, Optimal characteristic nanosizes of mineral bridges in mollusk nacre, vol.4, pp.32451-32456, 2014.

Y. Shao, H. P. Zhao, X. Q. Feng, and H. Gao, Discontinuous crack-bridging model for fracture toughness analysis of nacre, Journal of the Mechanics and Physics of Solids, vol.60, issue.8, p.37, 2012.

F. Song, A. K. Soh, and Y. L. Bai, Structural and mechanical properties of the organic matrix layers of nacre, Biomaterials, vol.24, pp.3623-3631, 2003.

Z. Q. Song, Y. Ni, L. M. Peng, H. Y. Liang, and L. H. He, Interface failure modes explain non-monotonic size-dependent mechanical properties in bioinspired nanolaminates, Scientific Reports, vol.6, p.53, 2015.

P. Stefan, P. Alexander, and C. Kloss, Models, algorithms and validation for opensource DEM and CFD-DEM, Computational Particle Mechanics, vol.4, p.42, 2017.

X. Sun, Z. Zhang, Y. Xu, and Y. Zhang, An elastic model for bioinspired design of carbon nanotube bundles, Acta Mechanica Sinica/Lixue Xuebao, vol.31, issue.2, p.53, 2015.

. Bibliography,

P. A. Vanniamparambil, M. Bolhassani, R. Carmi, F. Khan, I. Bartoli et al., A data fusion approach for progressive damage quantification in reinforced concrete masonry walls, Smart Materials and Structures, vol.23, issue.1, p.149, 2014.

J. Villanova, P. Cloetens, H. Suhonen, J. Laurencin, F. Usseglio-viretta et al., Multi-scale 3D imaging of absorbing porous materials for solid oxide fuel cells, Journal of Materials Science, vol.49, issue.16, p.112, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01073076

C. Wang, Y. Huang, Q. Zan, H. Guo, and S. Cai, Biomimetic structure designa possible approach to change the brittleness of ceramics in nature, Materials Science and Engineering C, vol.11, issue.1, pp.9-12, 2000.

R. Wang, Z. Suo, A. Evans, N. Yao, and I. A. Aksay, Deformation mechanisms in ice, vol.08544, pp.2485-2493, 2000.

U. G. Wegst, M. Schecter, A. E. Donius, and P. M. Hunger, Biomaterials by freeze casting, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.368, p.16, 1917.

J. William-pro, R. Kwei-lim, L. R. Petzold, M. Utz, and M. R. Begley, GPUbased simulations of fracture in idealized brick and mortar composites, Journal of the Mechanics and Physics of Solids, vol.80, pp.68-85, 2015.

G. Xu, N. Yao, I. A. Aksay, and J. T. Groves, Biomimetic Synthesis of Macroscopic-Scale Calcium Carbonate Thin Films. Evidence for a Multistep Assembly Process, Journal of the american chemical society, vol.120, issue.46, pp.11977-11985, 1998.

J. Xu, H. Qi, X. Fang, L. Lu, W. Ge et al., Quasi-real-time simulation of rotating drum using discrete element method with parallel GPU computing, Particuology, vol.9, issue.4, p.43, 2011.

R. Yadav, R. Goud, A. Dutta, X. Wang, M. Naebe et al., Biomimicking of Hierarchal Molluscan Shell Structure Via Layer by Layer 3D Printing, Industrial and Engineering Chemistry Research, vol.57, issue.32, p.185, 2018.

R. Yadav, M. Naebe, X. Wang, and B. Kandasubramanian, Review on 3D Prototyping of Damage Tolerant Interdigitating Brick Arrays of Nacre, Industrial and Engineering Chemistry Research, vol.56, issue.38, pp.10516-10525, 2017.

S. Zhang, J. Zhang, Z. Zhang, H. Dang, W. Liu et al., Preparation and characterization of self-assembled organic-inorganic nacre-like nanocomposite thin films, Materials Letters, vol.58, pp.2266-2269, 2004.

W. Zhang, R. Telle, and J. Uebel, ScienceDirect R-curve behaviour in weak interface-toughened SiC-C laminates by discrete element modelling, Journal of the European Ceramic Society, vol.34, p.53, 2014.

Z. Zhang, Y. Zhang, and H. Gao, On optimal hierarchy of load-bearing biological materials, Proceedings of the Royal Society B: Biological Sciences, vol.278, pp.519-525, 1705.

Z. Q. Zhang, B. Liu, Y. Huang, K. C. Hwang, and H. Gao, Mechanical properties of unidirectional nanocomposites with non-uniformly or randomly staggered platelet distribution, Journal of the Mechanics and Physics of Solids, vol.58, issue.10, p.52, 2010.

H. Zhao and L. Guo, Nacre-Inspired Structural Composites: Performance-Enhancement Strategy and Perspective, Adv. Mater, vol.29, issue.45, p.1702903, 2017.

D. Zhu and F. Barthelat, A novel biomimetic material duplicating the structure and mechanics of natural nacre, Conference Proceedings of the Society for Experimental Mechanics Series, vol.2, p.103, 2011.

H. P. Zhu, Z. Y. Zhou, R. Y. Yang, and A. B. Yu, Discrete particle simulation of particulate systems: A review of major applications and findings, Chemical Engineering Science, vol.63, issue.23, p.43, 2008.