Y. Lee, A model study of CaSi Cored Wire Injection, Proceedings of the International Symposium on Developments in Ladle Steelmaking and Continuous Casting, pp.154-166, 1990.

S. Sanyal, S. Chandra, S. Kumar, and G. Roy, An improved model of cored wire injection in steel melts, ISIJ International, vol.44, issue.7, pp.1157-1166, 2004.

A. Carre and S. Gerardin, Recent developments in Calcium treatment in steelmaking: a source of technical efficiency and cost savings, Clean Steel Conference, 2015.

D. Lu, Kinetics, Mechanisms and Modelling of Calcium treatment of Steel, 1992.

D. Lu, G. Iron, and W. Lu, Modeling of Calcium treatment, 76 Steelmaking Conference Proceedings, vol.76, pp.449-456, 1993.

E. Turkdogan, International Calcium treatment symposium, 1988.

H. Suito and R. Inoue, Thermodynamics on Inclusions composition in ultra clean steels, ISIJ International, vol.36, issue.5, pp.528-536, 1996.

G. Ye, P. Jonsson, and T. Lund, Thermodynamics and Kinetics of the Modification of Al2O3 Inclusions, ISIJ International, vol.36, pp.105-108, 1996.

N. Bannenberg, K. Harste, and O. Bode, «Melting Behaviour of Cored wire during Injection,» In Scaninject VI, 6th International Conference on refining processes, pp.247-265, 1992.

W. Tiekink, The behaviour of case in steelmaking and casting of calcium treated aluminium killed steel, Aachener Stahlkolloquium, 2015.

D. Mazumdar, A First Course in Iron and Steelmaking, 2015.

D. Lu and B. Eng, Kinetics Mechanism and Modelling of calcium treatment of steel (Thesis

F. Mucciardi, Master's thesis Dept, 1997.

C. Cicutti, J. Madias, C. E. , and J. Gonzalez, Control of microinclusions in calcium treated aluminium killed steels, 1997.

L. Holappa, M. Hamalainen, M. Liukkonen, and M. Lind, Thermodynamic examination on inclusion modification and precipitation from calcium treatment to solidified steel, Iron and Steelmaking, vol.30, issue.2, pp.111-115, 2003.

R. Tuttle, J. Smith, and K. Peaslee, Metall. Mater. Trans. B, vol.36, pp.885-892, 2005.

L. B. Dennis, Kinetics mechanisms and modelling of calcium treatment of steel (Thesis), 1992.

R. Higbie, AIChE, vol.31, p.365, 1935.

A. Lochiel and P. Caldebanki, Chemical Eng Soc, vol.19, pp.471-484, 1964.

M. Davidson and J. F. Baird, Chem. Eng. Soc, vol.17, pp.87-93, 1962.

M. Weber, Chem. Eng. Soc, vol.30, pp.1507-1510

A. Richardson, D. F. Bradshaw, and «. , Chemical engineering in Iron and steel industry, 1970.

D. Lu, G. Irons, and W. Lu, Modeling of calcium treatment of steel, SteelMaking Conference Proceedings, 1993.

Y. Higuchi, M. Numata, S. Fukagawa, and K. Shinme, Inclusion modification by calcium treatment, ISIJ International, vol.36, pp.151-154, 1996.

D. Lu, G. Irons, and W. Lu, Proc. conf. scaninject VI, 1992.

G. Irons, Metall Trans, pp.151-154, 1978.

. Kkmurray, Spectrometer schematic.gif

, Scanning Electron Microscopy

, Atomic Emission spectroscopy, Wikipedia

J. R. Grace, «Trans. Inst. chem. Eng, vol.116, p.51, 1973.

T. Ototani, Calcium Clean Steel, pp.4-7, 1986.

M. Joyant and C. Gatellier, IRSID Report, PCM-RE, 1108.

A. Yoffe and E. Heymann, Note on Antonoff's rule, Chemistry department, 1945.

, Knovel: Engineering Technical reference information, Surface Tension, Appendix, vol.9, 2011.

L. A. Bower and T. Lee, «Single bubble rising dynamics for moderate Reynolds number using Lattice Boltzman Method,» Computers and Fluids, vol.39, pp.1191-1207, 2010.

J. Hadamard, Mouvement permanent lent d'une sphere liquide et visqueuse dans une liquide visqueuse, CR Academic Science, vol.152, pp.8-1735, 1911.

W. Rybczynski, On the translatory motion of a fluid sphere in a viscous medium, Bull Int Acad Pol Sci Lett, pp.6-40, 1911.

H. Mendelson, The prediction of bubble terminal velocities from the wave theory, AIChE, vol.13, pp.2-250, 1967.

R. Davies and G. Taylor, The mechanics of large bubbles rising through extended liquids in tube, Proc R Soc Ser A, vol.200, pp.90-375, 1950.

G. Wallis, One dimensional two-phase flow, 1969.

T. Watanabe and K. Ebihara, Numerical simulation of coalescence and break up of rising droplets, Computers and Fluids, vol.32, issue.6, pp.823-834, 2003.

S. Z. Marcotte, Density contrast matters for drop fragmentation thresholds at low Ohnesorge number, Physics.flu-dyn, 2019.

J. Lehmann, Application of ArcelorMittal Maizières thermodynamic models to liquid steel elaboration, Revue de Metallurgie, vol.105, issue.11, pp.539-550, 2008.

J. N. Reddy, An Introduction to the Finite Element Method, 1984.

L. Ville, L. Silva, and T. Coupez, Convected level set method for the numerical simulation of luid buckling, International journal for numerical methods in fluids, vol.66, issue.3, pp.324-344, 2011.

S. Oshe and J. Sethian, Fronts propogating with curvature dependent speed: algorithms based on Hamilton-Jacobi Formulations, Journal of Computaional Physics, vol.79, issue.1, pp.12-49, 1988.

E. Pichelin and T. Coupez, Finite element solution of the 3d mold filing problem for viscous incompressible fluid, Comput. Methods Appl. Mech Eng, vol.163, pp.359-371, 1998.

T. Coupez, L. Silva, and L. Ville, Convected level set method for the numerical simulation of fluid buckling, International Journal for Numerical Methhods in Fluids, vol.66, issue.3, pp.324-344, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00595325

H. C. Nguyen, Anisotropic space-time adaptation for multi-fluid simulation, 2015.

T. Coupez, Reinitialisation convective et locale des fonctions level set pour le mouvement de surafces et d'interafces, Activités universitatire de Mécanique, 2006.

A. Brooks and T. Hughes, Streamline upwind/petrov-galerkin formulations for convection dminated flows with particular emphasis on the incompressible navier-stokes equations, Applied mechanics and engineering, vol.32, pp.199-259, 1982.

C. Baiocchi, F. Brezzi, and L. P. Franca, Virtual bubbles and the Galerkin least squares method, Computer methods in Applied Mechanics and engineering, vol.32, pp.199-259, 1982.

E. Hachem, T. Kloczko, H. Digonnet, and T. Coupez, Stablized finite element solution to handle complex heat and fluid flows in industrial furnaces using the immersed volume method, International Journal for Numerical Methods in Fluids, vol.68, issue.1, pp.99-121, 2012.

G. Scovazzi, A Discourse on Galilean Invariance, Supg Stabilization and the variational multiscale framework, Computer methods in applied mechanics and engineering, vol.196, pp.1108-1132, 2007.

T. E. Tezduyar and Y. Osawa, Finite element stabilization parameters computed from element Matrices and vectors, Computed methods in applied mechanics and engineering, vol.190, pp.411-430, 2000.

R. Codina, Stabilized Finite element approximation of transient incompressible flows using orthgonal subscales, Computer methods in applied mechanics and engineering, vol.191, pp.4295-4321, 2002.

Z. Sun, R. Logé, and M. Bernacki, 3d finite element model of semi solid permeability in an equiaxed granular structure, Computational Mateial Science, vol.49, pp.158-170, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00509733

T. Coupez, Grand transformations et Remaillage Automatique, 1991.

F. Alauzet, P. Frey, and B. Mohammadi, «Adaptation de mailage non structurés pour les problèmes instationnaires en trois dimensions,» Congrés National d'Analyse Numérique, 2003.

C. Dobrzynski, O. Pironneau, and P. Frey, Numerical coupling for air flow computations in complex architecures,» Jyvaskyla, 2004.

F. Alauzet and P. J. Frey, Estimateur d'erreur géométrique et métriques anisotropes pour l'adaptation de maillage, 2003.

T. Coupez, Metric construction by length distribution tensor and edge based for anisotropic adative meshing, J. Comput Phys, vol.7, pp.2391-2405, 2011.

L. Duchemin, S. Popinet, C. Josserand, and S. Zaleski, Jet formation in bubbles bursting at the free surface, Physics of Fluids, vol.14, issue.9, 2002.

B. Y. Ni, A. M. Zhang, and G. X. Wu, Simulation of a fully submerged bubble bursting through a free surface, European journal of mechanics, vol.55, pp.1-14, 2016.

C. H. Yu, Z. , Y. T. Tony, and W. H. Sheu, An improved interface preseving level set method for simulating three dimensional rising bubble, International Journal of Heat and Mass transfer, vol.103, pp.753-772, 2016.

N. Tofighi and M. Yildiz, Numerical simulation of single droplet dynamics in three phase flow using ISPH, Computers and Mathematics with Applications, vol.66, pp.525-536, 2013.

F. Boyer, C. Lapuerta, S. Minjeaud, B. Piar, and M. Quintard, Cahn-Hilliard/Navier-stokes Model for Simulation of Three-Phase Flows, Transport in Porous Media, vol.82, pp.463-483, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00860768

J. Kim, Phase field computations for ternary fluid flows, Computer methods in applied mechanics and engineering, vol.196, pp.4779-4788, 2007.

J. Bruchon, Y. Liu, and N. Moulin, Fnite element setting for fluid flow simulations with natural enforcement of the triple junction equilibrium, Computers and Fluids, vol.171, pp.103-121, 2018.

J. Brackbill, D. Kothe, and C. Zemach, A continum method for modeling surafce tension, computational physics, vol.100, pp.335-354, 1992.

T. Coupez, Metric construction by length distribution tensor and edge based erroe for anisotropic adaptive meshing, Journal of Computation Physics, vol.230, pp.2391-2405, 2011.

R. Guillaument, S. Vincent, J. Caltagirone, J. Duclos, M. Laugier et al., A new volume of fluid model for handling wetting effects. Application to the impact of emulsion o/w droplets on a moving plate, 7th International conference on Multiphase flow, 2010.

K. A. Smith, F. J. Solis, and D. L. Chopp, A projection method for motion of triple junctions by level sets, Interface Free Bound, vol.4, pp.263-276, 2002.

J. Kim, Phase field computations for ternary fluid flows, Comput. Methods Applied mechanics and engineering, vol.196, pp.4779-4788, 2007.

N. E. Kosseifi, Numerical simulation of boiling for industrial quenching processes, 2012.
URL : https://hal.archives-ouvertes.fr/pastel-00734601

J. R. Grace and M. E. Weber, Bubbles, Drops and Particles, 1978.

D. Darmana, N. G. Deen, and J. A. Kuipers, Detailed 3D Modeling of Mass transfer Processes in Two phase flows with Dynamic Interfaces, Chem. Eng. Technology, vol.29, issue.9, pp.1027-1033, 2006.

K. Hayashi and A. Toiyama, Interface tracking simulation of mass transfer from a dissolving bubble, 2011.

R. Courant, K. Friedrichs, and H. Lewy, On the partial difference equations of mathematical physics, 1928.

S. R. Bird, . Byron, E. Warren, and E. Lightfoot, Transport Phenomenon, 2007.

P. J. Roache, Verification and validation in computational science and engineering, pp.403-412, 1998.

W. L. Oberkampf and T. G. Trucano, Verification and validation in Computational Fluid Dynamics, 2002.

I. Calment and J. Magnaudet, Turbulent mass transfer through a flat shear free surface, Journal of Fluid Mechanics, vol.5553, pp.155-185, 2006.

E. Izard, L. Lacaze, and T. Bonometti, Modelling the normal bouncing dynamics of spheres in a viscous fluid, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01757874

J. Gibbs, the collected works, vol.2, 1928.

P. G. Debenedetti, Metastable liquids : Concepts and Principles, 1997.

H. R. Pruppacher and J. D. Klett, Microphysics of clouds and priciples, 1997.

M. Weber and . Volmer, Physical chemistry, vol.119, pp.277-301, 1926.

L. Farkas, Physical chemistry, vol.236, issue.125, 1927.

R. Becker and W. Doring, The kinetic treatment of nuclear formation in supersaturated vapors, Ann. Physics, pp.719-752, 1935.

, On the Theory of New Phase Formation:caviation, Acta Physicochim, p.18, 1943.

M. Blander and J. L. Katz, Bubble Nucleation in Liquids, AICHE Journal, vol.21, issue.5, pp.833-847, 1975.

M. Blander, J. , and L. Katz, The role of bubble nucleation in explosive boiling, Atlanta, 1973.

K. Yu and K. Z. Fiz, , 1960.

M. Blander and D. Hengstenberg, Bubble nucleation in n-pentane, n-hexane, n-pentane + hexadecane Mixtures and water, vol.75, 1971.

B. Katz, L. Milton, and . Joseph, Bubble Nucleation in liquids, vol.21, 1975.

J. T. Jarvis, D. Donohue, L. Marc, and J. Katz, Bubble Nucleation Mechanism of liquid droplets superheated in other liquids, vol.50, 1974.

R. Cole, Boiling Nucleation, 1974.

M. Ellion, Study of Mechanism of Boiling heat transfer, pp.20-88, 1954.

V. P. Carey, Liquid Vapour Phase Change Phenomenon, Mechanical Engineering Department, 1980.

L. Rayleigh, On the pressure developped in a liquid during the collapse of a spherical cavity, Philos Mag, vol.34, pp.94-98, 1917.

B. B. Mikic, . Rohsenow, and . Griffith, On bubble growth rates,» Heat and Mass transfer, vol.13, pp.657-666, 1970.

T. Theofanous and P. D. Patel, Universal relations for the bubble growth, Heat and Mass Transfer, vol.2, pp.83-98, 1976.

A. Prosperetti and M. S. Plesset, Vapour bubble growth in a superheated liquid, Fluid Mechanics, vol.85, pp.349-368, 1978.

G. Son and V. K. Dhir, Three dimensional simulation of saturated film boiling on a horizontal cylinder, Vols, vol.51, pp.1156-1167, 2008.

Y. L. Griffith, Titre : Etude expérimentale et numérique du traitement inclusionnaire de l'acier par injection de calcium Mots clés : Traitement calcium, 1969.