. .. References, Shear characteristics of GFRP-reinforced concrete deep beams without web reinforcement, Journal of Reinforced Plastics and Composites, vol.31, issue.16, pp.1063-1073, 2012.

D. A. Abrams, Tests of bond between concrete and steel, 1913.

S. Adhikary, B. Das, K. Li, and . Fujikake, Strength and behavior in shear of reinforced concrete deep beams under dynamic loading conditions, Nuclear Engineering and Design, vol.259, pp.14-28, 2013.

. Al-nahlawi, A. Khaled, and J. K. Wight, Beam Analysis Using Concrete Tensile Strength in Truss Models, ACI Structural Journal, 1992.

A. Ashour, Tests of Reinforced Concrete Continuous Deep Beams, ACI Structural Journal, vol.94, issue.S01, 1997.

A. Baktheer and R. Chudoba, Modeling of bond fatigue in reinforced concrete based on cumulative measure of slip, Computational Modeling of Concrete Structures: EURO-C, pp.767-776, 2018.

T. Baumann and H. Rüsch, Schubversuche mit indirekter Krafteinleitung : Versuche zum Studium der Verdu?belungswirkung der Biegezugbewehrung eines Stahlbetonbalkens, Heft / Deutscher Ausschuss für Stahlbeton, p.210, 1970.

Z. P. Bazant, Size effect in blunt fracture: Concrete, rock and metal, ASCE Journal Engineering Mechanics, vol.110, pp.518-535, 1984.

Z. P. Bazant and M. C. Burrow, Confinement effect in flexural ductilty of concrete: three-dimensional analysis, Materials and Structures, vol.13, pp.296-308, 1980.

D. S. Brisotto, E. Bittencourt, and V. M. Bessa, Simulating bond failure reinforced concrete by a plasticity model, Computers and Structures, vol.106, pp.81-90, 2012.

A. Casanova, L. Jason, and L. Davenne, Bond slip model for simulation of reinforced concrete structures, Engineering Structures (Engineering Structures), vol.39, pp.66-78, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01411079

J. Clément and . Luc, Interface acier -béton et comportement des structures en béton-armé, 1987.

. Codcogs, , 2016.

C. Costa, P. Pegon, A. Arêde, and J. Castro, Inplementation of the damage model in tension and compression with plasticity in Cast3M, 2004.

A. Daoud, Etude expérimentale de la liaison entre l'acier et le béton autoplçantcontribution à la modélisation numérique de l'interface, 2003.

D. Darwin, J. Zuo, M. L. Tholen, and E. K. Idun, Development Length Criteria for Conventional and High Relative Rib Area Reinforcing Bars, ACI Structural Journal, vol.93, issue.3, pp.347-369, 1996.

S. De-nardin, A. Lucia, and H. C. El-debs, Shear transfer mechanisms in composite columns: An experimental study, Steel and Composite Structures, vol.7, issue.5, pp.377-390, 2007.

E. Dehghani, F. Daneshjoo, A. A. Aghakouchak, and N. Khaji, A new bond-slip model for adhesive in CFRP-steel composite systems, Engineering Structures, vol.34, pp.447-454, 2012.

N. Dominguez, D. Brancherie, L. Davenne, and A. Ibrahimbegovic, Prediction of crack pattern distribution in reinforced concrete by coupling a strong discontinuity model of concrete cracking and a bond slip of reinforcement model, Engineering Computations, vol.22, pp.558-582, 2005.
URL : https://hal.archives-ouvertes.fr/hal-02002560

H. Dulacska, Dowel Action of Reinforcement Crossing Cracks in Concrete, Journal Proceedings, p.12, 1972.

. El-ariss and . Bilal, Behavior of beams with dowel action, Engineering Structures, vol.29, pp.899-903, 2007.

R. Eligehausen, E. P. Popov, and V. V. Bertero, Local bond stress-slip relationship of deformed bars under generalized excitations, 1983.

M. Esfahani, B. Reza, and . Vijaya-rangan, Infuence of transverse reinforcement on bond strength of tensile splices, Cement & Concrete Composites, vol.22, pp.159-163, 2000.

, Eurocode 2. NF-EN-1992: Calcul des Structures en béton, 2007.

S. Fawzia, X. Zhao, and R. Al-mahaidi, Bond-slip models for double strap joints strengthened by CFRP, Composite Structures, vol.92, pp.2137-2145, 2010.

F. C. Flippou, E. P. Popov, and V. V. Bertero, Effects of bond deterioration on hysteretic behavior of reinforced concrete joints, 1983.

C. Frantzeskakis and J. N. Theillout, Nonlinear finite element analysis of reinforced concrete structures with a particular stategy following the cracking process, Computers & Structures, vol.31, pp.395-412, 1989.

J. C. Galvez, J. M. Benitez, B. Tork, M. J. Casati, and D. A. Cendon, Splitting failure of precast prestressed concrete during the release of the prestressing force, Engineering Failure Analysis, vol.16, pp.2618-2634, 2009.

P. G. Gambarova, G. P. Rosati, and B. Zasso, Steel-to-concrete bond after concrete splitting: Test Results, Materials and Structures, vol.22, pp.35-47, 1989.

Y. Gan, Bond stress and slip modeling in nonlinear finite element analysis of reinforced concrete structures, 2000.

C. Giry, F. Dufour, and J. Mazars, Stress-based nonlocal damage model, International Journal of Solids and Structures, vol.48, pp.3431-3443, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01545303

P. Grassl, M. Johansson, and J. Leppanen, On the Numerical Modelling of Bond for the Failure Analysis of Reinforced Concrete, Engineering Fracture Mechanics (Engineering Fracture Mechanics), vol.189, pp.13-26, 2018.

M. N. Hadi, Bond of High Strength Concrete with High Strength Reinforcing Steel, Open Civil Engineering (The Open Civil Engineering Journal), vol.2, issue.2, pp.143-150, 2008.

A. A. Hassan, K. M. Hossain, and M. Lachemi, Strength, cracking and deflection performance of large-scale self-consolidating concrete beams subjected to shear failure, 2010.

J. He and G. Xian, Bond-slip behavior of fiber reinforced polymer strips-steel interface, Construction and Building Materials, vol.155, pp.250-258, 2017.

X. G. He and A. K. Kwan, Modeling Dowel Action of Reinforcement Bars for Finite Element Analysis of Concrete Structures, Computers and Structures, vol.79, pp.595-604, 2001.

A. Hillerborg, Fracture Mechanics of Concrete, pp.223-249, 1983.

J. Houde and M. S. Mirza, A finite element analysis of shear strength of reinforced concrete beams, ACI Special Publication, vol.42, issue.1, pp.103-128, 1974.

H. M. Husain, K. Nazar, H. S. Oukaili, and . Muhammed, Dowel action between two concretes, Journal of Engineering, vol.15, issue.2, pp.3583-3605, 2009.

R. Ince, E. Yalcin, and A. Arslan, Size-dependent response of the dowel action in RC members, Engineering Structures (Engineering Structures), vol.29, issue.29, pp.955-961, 2007.

R. Ince, E. Yalcin, A. Ve, and . Arslan, Betonarme Kirislerde Pecin Etkisinde Boyut Tesirinin Fraktal Modeli, Gaziantep/Turkey: XIII. Ulusal Mekanik Kongresi, 2003.

I. Jelic, M. N. Pavlovic, and M. D. Kotsovos, A study of dowel action in reinforced concrete beams, Concrete Research, vol.51, issue.2, pp.131-141, 1999.

L. Jendele and J. Cervenka, Finite element modelling of reinforcement with bond, Computers and Structures, vol.84, pp.1780-1791, 2006.

. Jin, D. Liu, X. Li, and . Du, Mechanical behavior and size effect of moderate highstrength RC colums under monotonic and cyclic axial compression, Engineering Structures, vol.124, pp.269-285, 2016.

M. Johansson, Composite action in connection regions of concrete filled steel tube columns, Steel and Composite Structures, vol.3, issue.1, pp.47-64, 2003.

E. N. Júlio, D. Dias-da-costa, F. A. Branco, and J. M. Alfaiate, Accuracy of design code expressions for estimating longitudinal shear strength of strengthening concrete overlays, Engineering Structures), vol.32, pp.2387-2393, 2010.

M. Karatas, K. Turk, and Z. C. Ulucan, Investigation of bond between lap-spliced steel bar and self-compacting concrete: The role of silica fume, Canadian Journal of Civil Engineering, vol.37, issue.3, pp.420-428, 2010.

E. E. Kazakoff, Dowel action in reinforced concrete construction, 1974.

S. Khafallah and M. Ouchenane, Numerical simulation of bond for pull-out tests: the direct problem, Asian Journal of Civil Engineering, vol.8, pp.491-505, 2007.

J. Kim and Y. Park, prediction of shear strength of reinforced concrete beam without web reinforcement, ACI Mater, vol.93, issue.3, pp.213-222, 1996.

P. Kontronis and J. Mazars, Simplified modelling strategies to simulate the dynamic behavior of R/C walls, Earthquate Engineering, vol.9, issue.2, pp.285-306, 2005.

A. K. Kwan and P. L. Ng, Modelling dowel action of discrete reinforcing bars for finite element analysis of concrete structures, Computers and Concrete (1), vol.12, pp.19-36, 2012.

J. -. Lee and S. Hong, Shear Transfer Strength Evaluation for Ultra-High Performance Fiber Reinforced Concrete, International Conference Data Mining, Civil and Mechanical Engineering, 2015.

P. Li and Y. Wu, Stress-strain behavior of actively and passively confined concrete under cyclic axial loading, Composite Structures, vol.149, pp.369-384, 2016.

J. C. Lim and T. Ozbakkaloglu, Stress-strain model for normal and light weight concretes under uniaxial and triaxial compression, Construction and Building Materials, vol.71, pp.492-509, 2014.

H. Lin, Y. Zhao, J. Ozbolt, and R. Hans-wolf, The bond behavior between concrete and corroded steel bar under repeated loading, Engineering Structures (Engineering Structures), vol.140, pp.390-405, 2017.

A. Lindorf, L. Lemnitzer, and M. Curbach, Experimental investigations on bond behavior of reinforced concrete under transverse tension and repeated loading, Engineering Structures, vol.31, issue.7, pp.1469-1476, 2009.

D. L. Logan, A First Course in the Finite Element Method (Fifth Edition), 2012.

L. N. Lowes, P. Jack, S. Moehle, and . Govindjee, Concrete-steel bond model for use in finite element modeling of reinforced concrete structures, ACI Structural Journal, 0511.

X. Z. Lua, J. G. Teng, L. P. Yea, and J. J. Jiang, Bond-slip models for FRP sheets/plates bonded to concrete, Engineering Structures, vol.27, pp.920-937, 2005.

K. Lundgren, Three-Dimensional Modelling of Bond in Reinforced Concrete, 2002.

, Technical

J. Magnusson, Bond and anchorage pf ribbed bars in high strenght concrete. Technical, Gotebourg Sweden: Division of Concrete Structures, 2000.

R. J. Malvar, Bond of reinforcement under controlled confinement, 1991.

C. Mang, Modélisation de la liaison acier-béton dans le calcul de structures en béton armé, 2016.

C. Mang, L. Jason, and L. Davenne, A new bond slip model for reinforced concrete structures validation by modelling a reinforced concrete tie, Engineering Computations (Engineering Computations), vol.32, issue.7, pp.1934-1958, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01221716

B. Martin-pérez and S. J. Pantazopoulou, Effect of bond, aggregate interlock and dowel action on the shearstrength degradation of reinforced concrete, Engineering Structures, vol.23, pp.214-227, 2001.

J. Mazars, A Description of Micro and Macroscale Damage of Concrete Structures, Engineering Fracture Mechanics (Engineering Fracture Mechanics), vol.25, pp.729-737, 1986.

J. Mazars, F. Ragueneau, G. Casaux, A. Colombo, and P. Kotronis, Numerical modelling for earthquake engineering: the case of lightly RC structural walls, International Journal for Numerical and Analytical Methods in Geomechanics, pp.857-874, 2004.
URL : https://hal.archives-ouvertes.fr/hal-01008550

M. Moretti and T. P. Tassios, Behaviour of short columns subjected to cyclic shear displacements: Experimental Results, Engineering Structures, vol.29, pp.2018-2029, 2007.

S. Morita and T. Kaku, Local bond stress-slip relationship under repeated loading, 1974.

. Navarro-gregori, E. J. Juan, P. Mezquida-alcaraz, J. Serna-ros, and . Echegaray-oviedo, Experimental study on the steel-fibre contribution to concrete shear behavior, Construction and Building Materials, vol.112, pp.100-111, 2016.

D. Ngo and A. C. Scordelis, Finite element anaylsis of reinforced concrete beams, ACI Journal (ACI Journal, 1967.

C. G. Nogueira, W. S. Venturini, and H. B. Coda, Material and geometric nonlinear anaysis of reinforced concrete frame structures considering the influence of shear strength complementary mechanisms, Solids and Structures, vol.10, pp.953-980, 2013.

J. Oliver, D. L. Linero, A. E. Huepse, and O. L. Manzoli, Two dimensional modeling of material failure in reinforced concrete by means of a continuum strong discontinuity approach, Computer Methods in Applied Mechanics and Engineering, vol.197, pp.332-348, 2008.

C. O. Orangun, J. O. Jirsa, and J. E. Breen, The Strength of Anchored Bars:Reevaluation of test data on development length and splices, ACI Structural Journal, vol.74, issue.3, pp.114-122, 1977.

R. Park and T. Paulay, Reinforced Concrete Structures, 1975.

G. Rao, K. Appa, F. Pandurangan, and . Sultana, Studies on the pull out strength of ribbed bars in high strength concrete, Proc. of FraMCoS-6, vol.1, pp.295-301, 2007.

H. W. Reinhardt, J. Blaauwendraad, and E. Vos, Prediction of bond between steel and concrete by numerical analysis, Matrriaux and Constructions, vol.17, pp.311-320, 1984.

M. Rezazadeh, V. Carvelli, and A. Veljkovic, Modelling bond of GFRP rebar and concrete, Construction and Building Materials, vol.153, pp.102-116, 2017.

P. J. Robins and I. G. Standish, The effect of lateral pressure on the bond of round reinforcing bars in concrete, 1982.

J. Sagaseta and R. L. Vollum, Influence of aggregate fracture on shear transfer through cracks in reinforced concrete, Magazine of Concrete Research, vol.63, issue.2, pp.119-137, 2011.

J. Santos and A. Henriques, New finite element to model bond-slip with steel strain effect for the analysis of reinforced concrete structures, Engineering Structures, vol.86, pp.72-83, 2015.

B. Sanz and J. Planas, Simulation of interface behavior between steel and concrete to study loss of bond due to reinforcement corosion, Conference Paper: EURO-C Computational Modeling of Concrete and Concrete Structures, 2018.

B. Sanz, J. Planas, and J. M. Sancho, An experimental and numerical study of the pattern of cracking of concrete due to steel reinforcement corrosion, Engineering Fracture Mechanics, vol.114, pp.26-41, 2013.

H. Shang, F. Cui, P. Zhang, T. Zhao, and G. Ren, Bond behavior of steel bar embedded in recycled coarse aggrate concrete under lateral compression load, Construction and Building Materials, vol.150, pp.529-537, 2017.

W. A. Slater, F. E. Richart, and G. G. Scofield, Test of bond resistance between concrete and steel, 1920.

P. Soroushian, K. Obaseki, M. C. Royjas, and J. Sim, Analysis of dowel bars acting against concrete core, ACI Journal, vol.83, issue.4, pp.642-689, 1986.

P. Sorousian, Behavior of the bars in dowel action against concrete cover, ACI Structural Journal, vol.84, issue.2, pp.170-176, 1987.

T. A. Soylev and R. François, Effects of bar-placement conditions on steelconcrete bond, Materials and Structures, vol.39, pp.211-220, 2005.
URL : https://hal.archives-ouvertes.fr/hal-02340941

M. Sulaiman, . Fauzy, C. K. Faisal-amsyar-redzuan, A. Z. Ma, W. Awang et al., Bond Between SSTT Confined Concrete and Ribbed Steel Reinforcement Bar, Transactions on Science and Technology, vol.4, issue.3, pp.194-201, 2017.

M. Sulaiman, C. Fauzy, and . Ma, Review on Bond and Anchorage of Confined High-strength Concrete, Structures, vol.11, pp.97-109, 2017.

R. Tepfers, A theory of bond applied to overlapped tensile reinforcement splicesfor deformed bars. Technical, Goteborg/Sweden: Division of Concrete Structures, 1973.

A. Torre-casanova, Prise en Compte de la Liaison Acier-Béton pour le Calcul de Structures Industrrielles, 2013.

A. Torre-casanova, L. Jason, L. Davenne, and X. Pinelli, Confinement effects on the steel-concrete bond strength and pull-out failure, Engineering Fracture Mechanics, vol.97, pp.92-104, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01411076

S. Tudjono, A. S. Pamungkas, and A. Han, Modelling the relationship of the flexural rigidity factor and reinforcement ratio by numerical simulation, Procedia Engineering, vol.95, pp.241-251, 2014.

J. Uijl and A. Bigaj-van-vliet, A bond model for ribbed bars based on concrete confinement, p.41, 1996.

G. Venderame, P. Ricci, G. D. Carlo, and G. Manfredi, Cyclic bond behavior of of plain bars. I: Experimental investigation, Construction Building Materials, vol.23, issue.12, pp.3499-3511, 2009.

G. M. Verderame, G. Carlo, P. Ricci, and G. Fabroccino, Cyclic bond behavior of of plain bars. II: Analytical Investigation, Constrating Building Materials, vol.23, issue.12, pp.3412-3522, 2009.

E. N. Vintzeleou and T. P. Tassios, Behavior of dowels under cyclic deformations, ACI Structural Journal, vol.84, issue.1, pp.18-30, 1987.

S. Viwathanatepa, P. Popov, and V. V. Bertero, Effects of generalized loadings on bond of reinfocing bars embedded in confined concrete blocks, 1979.

J. C. Walraven and H. W. Reinhardt, Theory and experiments on the mechanical behavior of cracks in plain and reinforced concrete subjected to shear loading, vol.26, 1981.

H. Wang and G. Wu, Bond-slip models for CFRP plates externally bonded to steel substrates, Composite Structures, vol.184, pp.1204-1214, 2018.

Z. Wu, X. Zhang, Y. Hu, and Q. Li, Bond Behavior of plain round bars embedded in concrete subjected to biaxial lateral tensile-compressive stresses, Structural Engineering, vol.140, issue.4, p.4013089, 2014.

J. Xia, Y. Xiao, K. R. Mackie, M. Al-ramahee, and A. Mirmiran, Dowel action and shear strenght contribution of high strength rebar embedded in ultrahigh performance fiber reinforced concrete, Engineering Structures, vol.83, pp.223-232, 2015.

S. H. Xia and J. G. Teng, Behavior of FRP-to-steel bonded joints, Proceedings of the International Symposium on Bond Behaviour of FRP in Structures. Hong Kong, China: International Institute for FRP in Construction, 2005.

J. Xiao, Z. Li, and J. Li, Shear transfer across a crack in highstrength concrete after elevated temperatures, Construction and Building Materials, vol.71, pp.472-483, 2014.

F. Xu, W. Zhimin, J. Zheng, Y. Hu, and Q. Li, Experimental study on the bond behavior of reinforcing bars in concrete subjected to lateral pressure, Metarials in Civil Engineering, vol.24, issue.1, pp.125-133, 2012.

F. Xu, Z. Wu, J. Zheng, Y. Hu, and Q. Li, Bond behavior of plain round bars in concrete under complex lateral pressures, ACI Structural Journal 111-S02, issue.1, pp.111-113, 2014.

T. Xu, A. Castel, R. I. Gilbert, and A. Murray, Modeling the tensile steel reinforcement strain in RC-beams subjected to cycles of loading and unloading, Engineering Structures, vol.126, pp.92-105, 2016.

H. Yang, Y. Deng, Y. Qin, and . Lv, A Study on the Bond Behavior of Corroded Reinforced Concrete Containing Recycled Aggragetes, Advence in Materials Science and Engineering, 2015.

J. Yao and J. G. Teng, Plate end debonding in FRP-plated RC beams-I: Experiments, Engineering Structures, vol.29, pp.2457-2471, 2007.

Y. K. Yong, M. G. Nour, and E. G. Nawy, Behavior of Laterally Confined High-Strength Concrete under Axial Loads, Engineering Structrues, vol.114, issue.2, pp.332-51, 1988.

N. Zhang and K. Tan, Size effect in RC deep beams Experimental investigation and STM verification, Engineering Structures, vol.29, pp.3241-3254, 2007.

X. Zhang, W. Dong, Z. Jian-jun-zheng, Y. Wu, Q. Hu et al., Bond behavior of plain round bars embedded in concrete subjected to lateral tension, Construction and Building Materials, vol.54, pp.17-26, 2014.

X. Zhang, Z. Wu, J. Zheng, W. Dong, and A. Bouchair, Ultimate bond strength of plain round bars embedded in concrete supjected to uniform lateral tension, Construction and Building Materials, vol.117, pp.163-170, 2016.