, Navigating the numbers: Greenhouse gas data and international climate policy, World Resources Inst, 2005.
, Case study on sea-level rise impacts, OECD Workshop on the Benefits of Cliamte Policy: Improving Information for Policy Makers. Dokument ENV/EPOC/GSP (2003), 2003.
, Bulletin of the American Meteorological Society, vol.91, issue.7, 2009.
, Study: 634 million people at risk from rising seas, 2007.
, Reducing co 2 emission from passenger cars, 2010.
, Monitoring co 2 emissions from passenger cars and vans in 2013, EEA Technical report, 2014.
, NON-OFFICIAL site for Fiat Chrysler Automobiles world wide trends, market research and data analysis, Sales results insights, 2014.
, Echec des européens en vue de réduire la pollution automobile, 2013.
, Co 2 des voitures : Berlin défend ses grosses cylindrées et marque des points, Le Figaro, 2013.
, Aérodynamique automobile, Mécanique & industries, vol.2, issue.3, pp.199-210, 2001.
, Réduction des émissions de co 2 : optimisation de la traînée aérodynamique automobile par algorithmes hybrides, 2003.
, Reduction de la trainee d'un vehicule automobile simplifié a l'aide du controle actif par jet syntetique, 2008.
, L'importance de l'aerodynamique pour l'automobile
, Numerical and experimental investigations on the aerodynamic characteristic of three typical passenger vehicles, Journal of Applied Fluid Mechanics, vol.7, issue.4, pp.659-671, 2014.
, Analysis of the base wake on passenger vehicles, 2013.
, Aerodynamics of Road Vehicles, SAE international, 1998.
, The new audi a6/a7 family-aerodynamic development of different body types on one platform, SAE International Journal of Passenger Cars-Mechanical Systems, vol.4, issue.1, pp.197-206, 2011.
, The aerodynamic development of the tesla model s-part 1: Overview, 2012.
, Drag and dirt deposition mechanisms of external rear view mirrors and techniques used for optimisation, SAE Technical Paper, 2000.
, Investigation of aerodynamic resistance of rotating wheels on passenger cars, 2013.
, The aerodynamic development of the tesla model s-part 2: Wheel design optimization, 2012.
, Improvement of vehicle aerodynamics by wake control, JSAE review, vol.16, issue.2, pp.151-155, 1995.
, Race Car Aerodynamics: Designing for Speed (Engineering and Performance), 1995.
, Aerodynamics of road vehicles. Annual review of fluid mechanics, vol.25, pp.485-537, 1993.
, On the use of reference models in automotive aerodynamics, SAE Technical Paper, 2004.
, Some salient features of the time-averaged ground vehicle wake, 1984.
, Some observations on road vehicle wakes, 1984.
, Drag measurement through wake analysis, 1984.
, Evaluation of a complete wake integral for the drag of a car-like shape, 1984.
, The effect of ambient wind on a road vehicle's aerodynamic work requirement and fuel consumption, 1984.
, Comparisons of effectiveness of commercially available devices for the reduction of aerodynamic drag on tractor-trailers, SAE Technical Paper, 1975.
, Necessity and premises for reducing the aerodynamic drag of future passenger cars, SAE Technical Paper, 1981.
, Two small staps toward the low-drag car, New Scientist, vol.95, 1324.
, Why do all new cars look alike?, 2012.
, Le design doit traduire des valeurs, Strategies : Marketing Communication Medias, issue.1783, 2014.
, Diese frau ist der albtraum der auto-designer, 2016.
, Effects of the corner radius on the near wake of a square prism, Experiments in Fluids, vol.40, issue.1, pp.106-118, 2006.
, The influence of corner radius on the forces experienced by cylindrical bluff bodies in oscillatory flow, Applied Ocean Research, vol.6, issue.2, pp.83-89, 1984.
, Effect of rounding side-corners on aerodynamic forces and turbulent wake of a cube placed on a ground plane, Experiments in Fluids, vol.11, issue.1, p.78, 1991.
,
, The effect of turbulence on aerodynamic forces on a square cylinder with various corner shapes, Journal of Wind Engineering and Industrial Aerodynamics, vol.83, issue.1, pp.135-145, 1999.
, Influence of afterbody rounding on the pressure drag of an axisymmetrical bluff body, Journal of Wind Engineering and Industrial Aerodynamics, vol.69, pp.179-188, 1997.
, Experimental investigation on the influence of boundary layer thickness on the base pressure and near-wake flow features of an axisymmetric blunt-based body, Experiments in fluids, vol.54, issue.11, pp.1-16, 2013.
, The international vortex flow experiment 2 (vfe-2): background, objectives and organization, Aerospace Science and Technology, vol.24, issue.1, pp.1-9, 2013.
, Initial experiments and analysis of blunt-edge vortex flows for vfe-2 configurations at nasa langley, usa, Aerospace Science and Technology, vol.24, issue.1, pp.10-21, 2013.
, Development of delta wing aerodynamics research in universiti teknologi malaysia low speed wind tunnel, Advances in Mechanical Engineering, vol.6, p.434892, 2014.
, Der neue audi 100-ein beispiel für konsequente aerodynamische personenwagen-entwicklung, vol.85, pp.419-425, 1983.
, Drag and driving-stability-related aerodynamic forces and their interdependence-results of measurements on 3/8-scale basic car shapes, SAE Technical Paper, 1986.
, C466/036 shape features which influence crosswind sensitivity, vol.9, pp.43-43, 1993.
, Effects of suppressing the 3d separation on the rear slant on the flow structures around an ahmed body, Journal of Wind Engineering and Industrial Aerodynamics, vol.107, pp.237-243, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00769578
, Wind tunnel investigations of road vehicle wakes, 1982.
, The importance of rear pillar geometry on fastback wake structures, Journal of Wind Engineering and Industrial Aerodynamics, vol.125, pp.111-120, 2014.
, Eclatement tourbillonnaire dans le sillage turbulent d'un véhicule générique, 2005.
, Perturbations optimales dans les écoulements de paroi turbulents et application au contrôle de décollement, 2009.
, Contrôle actif d'écoulement en aérodynamique automobile, 2004.
, Wake and Drag Manipulation of a Bluff Body Using Fluidic Forcing, Ecole nationale supérieure de mécanique et d'aérotechnique, 2015.
, Analysis and control of three-dimensional turbulent wakes: from axisymmetric bodies to road vehicles, 2013.
, Application du contrôle par jets pulsés à un corps non profilé, 2012.
, On simulating the turbulent flow around the ahmed body: A french-german collaborative evaluation of les and des, Computers & Fluids, vol.78, pp.10-23, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01145131
,
, Numerical simulation with a des approach for automotive flows, Journal of Fluids and Structures, vol.27, issue.5, pp.807-816, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01145123
, Computational study of flow around a simplified car body, Journal of wind engineering and industrial aerodynamics, vol.96, issue.6, pp.1207-1217, 2008.
URL : https://hal.archives-ouvertes.fr/hal-01156027
, The effect of aspect ratio on the wake of the ahmed body, Experiments in Fluids, vol.56, issue.6, pp.1-11, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01167075
, Properties of the mean recirculation region in the wakes of two-dimensional bluff bodies, Journal of Fluid Mechanics, vol.351, pp.167-199, 1997.
, On the influence of boundary layer thickness on the base drag and on the near-wake flow of an axisymmetric blunt-based body, 2012.
, Experimental sensitivity analysis of the global properties of a two-dimensional turbulent wake, Journal of Fluid Mechanics, vol.693, pp.115-149, 2012.
, Control of a three-dimensional blunt body wake using low and high frequency pulsed jets, International Journal of Flow Control, vol.6, issue.1, pp.61-74, 2014.
, Modelling of stationary three-dimensional separated air flows around an ahmed reference model, ESAIM: Proceedings, vol.7, pp.173-182, 1999.
, Supaero Graduate Program, 2015.
, Flow separations generated by a simplified geometry of an automotive vehicle, iutam symp. Unsteady Separated Flows, 2002.
, Flow structures in the near-wake of the ahmed model, Journal of fluids and structures, vol.20, issue.5, pp.673-695, 2005.
, Flow around a simplified car, part 2: understanding the flow, Journal of Fluids Engineering, vol.127, issue.5, pp.919-928, 2005.
, High-order large-eddy simulation of flow over the "ahmed body" car model, Physics of Fluids, vol.20, issue.9, p.95101, 1994.
, The ahmed model unsteady wake: Experimental and computational analyses, SAE transactions, vol.112, issue.6, pp.1385-1396, 2003.
, Numerical simulation and spectral analysis of pressure fluctuations in vehicle aerodynamic noise generation, SAE Technical Paper, 2002.
, Flow and turbulence structures in the wake of a simplified car model (ahmed model), 2007.
, Experimental characterization of flow unsteadiness in the centerline plane of an ahmed body rear slant, Experiments in fluids, vol.54, issue.3, pp.1-16, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00836402
, Turbulent near wake of an ahmed vehicle model. Experiments in fluids, vol.54, pp.1-19, 2013.
, Drag and lift reduction of a 3d bluff body using flaps, Experiments in fluids, vol.44, issue.4, pp.491-501, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00173194
, Bluff-body drag reduction using a deflector, Experiments in Fluids, vol.50, issue.2, pp.385-395, 2011.
, Aerodynamic drag reduction of an ahmed body based on deflectors, Journal of Wind Engineering and Industrial Aerodynamics, vol.148, p.80, 2016.
,
, Drag and lift reduction of a 3d bluff-body using active vortex generators, Experiments in fluids, vol.48, issue.5, pp.771-789, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01654042
, Drag reduction of a 3d bluff body using coherent streamwise streaks, Experiments in fluids, vol.49, issue.5, pp.1085-1094, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01020631
, Aerodynamic drag reduction by vertical splitter plates. Experiments in fluids, vol.48, pp.1-16, 2010.
, Drag reduction on the 25 slant angle ahmed reference body using pulsed jets, Experiments in fluids, vol.52, issue.5, pp.1169-1185, 2012.
, Separation flow control on a generic ground vehicle using steady microjet arrays, Experiments in fluids, vol.51, issue.5, pp.1177-1187, 2011.
, Separated flows around the rear window of a simplified car geometry, Journal of Fluids Engineering, vol.130, issue.2, p.21101, 2008.
, Drag reduction on the 25-deg ahmed model using fluidic oscillators, Journal of Fluids Engineering, vol.137, issue.5, p.51108, 2015.
, Active procedures to control the flow past the ahmed body with a 25 rear window, International Journal of Aerodynamics, vol.1, issue.3-4, pp.299-317, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00664963
, Contribution de l'éclatement tourbillonnaire à la réduction de la traînée des véhicules automobiles: approche numérique, Comptes Rendus Mecanique, vol.334, issue.6, pp.368-372, 2006.
, The flow structure around an Ahmed vehicle model and its active control, 2014.
, Aerodynamics of heavy vehicles, Annual Review of Fluid Mechanics, vol.46, pp.441-468, 2014.
, Contrôle d'écoulement en aérodynamique automobile. Congrés Français de Mécanique, 2009.
, Active flow control using pulsed micro-jets on a full-scale production car, International Journal of Flow Control, vol.6, issue.1, pp.1-20, 2014.
, Comparisons between cfd and experimental results for a simplified car model in wall proximity, 2nd international symposium on integrating CFD and experiments in aerodynamics, 2005.
, The effects of tunnel blockage and aspect ratio on the mean flow past a circular cylinder with reynolds numbers between 10 4 and 10 5, Journal of Fluid Mechanics, vol.114, pp.361-377, 1982.
, Effect on drag of the flow orientation at the base separation of a simplified blunt road vehicle, Experiments in fluids, vol.54, issue.5, pp.1-10, 2013.
, Experimental analysis of flow structures and forces on a 3d-bluff-body in constant cross-wind, Experiments in Fluids, vol.43, issue.4, pp.579-594, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00203039
, A-Tech Instruments Ltd. 8400 scanner digitizer interface pressure scanner specifications
, Applied statistics and probability for engineers, 2010.
, Towards better uncertainty estimates for turbulence statistics. Experiments in fluids, vol.22, pp.129-136, 1996.
,
, Unsteady hot-wire and hot-film wake measurements of automobile-like bluff bodies, 1989.
, Von Karman Institute lecture. Particle image velocimetry, 2012.
, Analyse des enduits de visualisation pariétale utilisés en aérodynamique, 2006.
, Analysis and control of the near-wake flow over a square-back geometry, Computers & Fluids, vol.38, issue.1, pp.60-70, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00907894
, Powerflow best practices. Basic training courses, 2015.
, Unsteady flow simulation of the ahmed reference body using a lattice boltzmann approach, Computers & fluids, vol.35, issue.8, pp.940-950, 2006.
, Flow and turbulence structures in the wake of a simplified car model (ahmed modell), New Results in Numerical and Experimental Fluid Mechanics III, pp.323-330, 2002.
, Numerical simulation of confined flows past obstacles-the comparative study of lattice boltzmann and spectral element methods, Archives of Mechanics, vol.64, issue.4, pp.423-456, 2012.
, Eddies, streams, and convergence zones in turbulent flows, Studying Turbulence Using Numerical Simulation Databases, vol.2, pp.193-208, 1988.
, A general classification of three-dimensional flow fields, Physics of Fluids A: Fluid Dynamics, vol.2, issue.5, pp.765-777, 1989.
, On the identification of a vortex, Journal of fluid mechanics, vol.285, pp.69-94, 1995.
, Combining piv, pod and vortex identification algorithms for the study of unsteady turbulent swirling flows, Measurement Science and Technology, vol.12, issue.9, p.1422, 2001.
, Techniques d'identification des structures cohérentes dans un écoulement 2d. Laboratoire d'Etudes des Systémes Thermiques et Energétique, 2006.
, Détection expérimentale de structures tourbillonnaires au sein d'un jet plan confiné en impact, 2011.
, Study of the influence of a bluff body rear-end geometry on its aerodynamics, 2015.
, Comparison of different ground simulation techniques for use in automotive wind tunnels, SAE Technical Paper, 1990.
, Vérification de la couche limite du faux plancher maquette, 2013.
, Influence of floor motions in wind tunnels on the aerodynamics of road vehicles, Journal of wind engineering and industrial aerodynamics, vol.93, issue.9, pp.677-696, 2005.
, Bluff-body aerodynamics as applied to vehicles, Journal of Wind Engineering and Industrial Aerodynamics, vol.49, issue.1, pp.1-21, 1993.
, The vortex structure behind an ahmed reference model in the presence of a moving ground plane, Experiments in fluids, vol.42, issue.5, pp.659-669, 2007.
, The influence of ground simulation on the aerodynamics of a simple car model, 1997.
, A comparison of the ground-plane-suction and moving-belt ground-representation techniques, SAE Technical Paper, 1988.
,
, Springer handbook of experimental fluid mechanics, vol.1, 2007.
, Observations of reynolds number sensitivity in the separated flow region on a bluff body, Journal of Wind Engineering and Industrial Aerodynamics, vol.73, issue.3, pp.231-249, 1998.
, The effect of front-edge rounding and rear-edge shaping on the aerodynamic drag of bluff vehicles in ground proximity, SAE Technical Paper, 1985.
, Dynamics of separation bubbles formed on rounded edges, 12th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00147320
, 1/4 scale vehiclewake pattern analysis using near-wall piv, SAE Technical Paper, 2006.
, Influence of afterbody rounding on the pressure distribution over a fastback vehicle, Experiments in Fluids, vol.57, issue.3, pp.1-12, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01297591
, A theory of the blockage effects on bluff bodies and stalled wings in a closed wind tunnel, DTIC Document, 1963.
, The aerodynamic effects on a cornering ahmed body, Journal of Wind Engineering and Industrial Aerodynamics, vol.154, pp.34-46, 2016.
, The effect of backlight aspect ratio on vortex and base drag for a simple car-like shape, 2008.
, Large eddy simulation of flow around the ahmed body, The Aerodynamics of Heavy Vehicles: Trucks, Buses, and Trains, pp.77-87, 2004.
, The effect of aspect ratio on the wake of the ahmed body, Experiments in Fluids, vol.56, issue.6, pp.1-11, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01167075
, The effect of base slant on the flow pattern and drag of three-dimensional bodies with blunt ends, Aerodynamic Drag Mechanisms of Bluff Bodies and Road Vehicles, pp.191-226, 1978.
, Effect of aspect ratio on the near-wake flow structure of an ahmed body, Journal of Wind Engineering and Industrial Aerodynamics, vol.147, pp.95-103, 2015.
, Characterization of the streamwise vortices and near-wake dynamics in the turbulent flow around the 25 degrés ahmed body based on spiv, Contrôle des décollements: Separated flow control and aerodynamic performance improvements, 2013.
, , 2015.
, Mechanisms of two and three-dimensional base drag, Aerodynamic Drag Mechanisms of Bluff Bodies and Road Vehicles, pp.137-159, 1978.
, A first course in turbulence, 1972.
, Turbulence en mécanique des fluides: analyse du phénomène dans une perspective de sa modélisation à l'usage de l'ingénieur, 1990.
, Drag due to lift: concepts for prediction and reduction, Annual Review of Fluid Mechanics, vol.33, issue.1, pp.587-617, 2001.
, Vortex drag for a simple bluff body at incidence in ground proximity, SAE Technical Paper, 2005.
,
, Wake structure and drag of vehicles with rounded rear edges, 50th International Conference on Applied Aerodynamics. 3AF, 2015.
, Aerodynamic performances of rounded fastback vehicle, SUBMITTED TO Proceedings of the Institution of Mechanical Engineers, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01449542
, Aerodynamic shape improvement based on surface pressure gradients in the stream-wise and the transverse directions, SAE Technical Paper, 2010.
, PSA, 2004.
, BMW, 2004.
, GM, 2011.
, PSA, vol.2854858, 2003.
, Aston martin's aeroblade revolutionizes automotive downforce aerodynamics
, Some salient features of the time-averaged ground vehicle wake, 1984.
, Drag and lift reduction of a 3D bluff body using flaps, Exp Fluids, vol.44, issue.4, pp.491-501, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00173194
, Turbulence en mécanique des fluides: analyse du phénomène dans une perspective de sa modélisation à l'usage de l'ingénieur, 1990.
, Experimental aerodynamic study of a car-type bluff body, Exp Fluids, vol.50, issue.5, pp.1273-1284, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01319500
, Wind tunnel investigations of road vehicle wakes, 1982.
, The importance of rear pillar geometry on fastback wake structures, J Wind Eng Ind Aerodyn, vol.125, pp.111-120, 2014.
, Combining PIV, POD and vortex identification algorithms for the study of unsteady turbulent swirling flows, Meas Sci Technol, vol.12, issue.9, p.1422, 2001.
, The effect of backlight aspect ratio on vortex and base drag for a simple car-like shape, 2008.
, The influence of ground simulation on the aerodynamics of a simple car model, 1997.
, Drag reduction on the 25 slant angle ahmed reference body using pulsed jets, Exp Fluids, vol.52, issue.5, pp.1169-1185, 2012.
, Race car aerodynamics: designing for speed (engineering and performance), J Fluids Eng, vol.127, issue.5, pp.919-928, 1995.
, Initial experiments and analysis of blunt-edge vortex flows for VFE-2 configurations at NASA Langley, USA, Aerosp Sci Technol, vol.24, issue.1, pp.10-21, 2013.
, , 2014.
, Drag and driving-stabilityrelated aerodynamic forces and their interdependenceresults of measurements on 3/8-scale basic car shapes. SAE Technical Paper, 1986.
, Shape features which influence crosswind sensitivity. C466/036, vol.9, pp.43-43, 1993.
, Effects of suppressing the 3D separation on the rear slant on the flow structures around an Ahmed body, Journal of Wind Engineering and Industrial Aerodynamics, vol.107, pp.237-243, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00769578
, The importance of rear pillar geometry on fastback wake structures, Journal of Wind Engineering and Industrial Aerodynamics, vol.125, pp.111-120, 2014.
, The Aerodynamic Development of the Tesla Model S-Part 1: Overview. SAE Technical Paper, 2012.
, Influence of afterbody rounding on the pressure distribution over a fastback vehicle, Experiments in Fluids, vol.57, issue.3, pp.1-12, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01297591
, Towards better uncertainty estimates for turbulence statistics, Experiments in fluids, vol.22, issue.2, pp.129-136, 1996.
, Unsteady flow simulation of the Ahmed reference body using a lattice Boltzmann approach, Computers & fluids, vol.35, issue.8, pp.940-950, 2006.
, Numerical simulation and spectral analysis of pressure fluctuations in vehicle aerodynamic noise generation. SAE Technical Paper, 2002.
, Wake structure and drag of vehicles with rounded rear edges, 50th International Conference on Applied Aerodynamics. 3AF, p.1, 2015.
, Aerodynamics of road vehicles. Annual review of fluid mechanics, vol.25, pp.485-537, 1993.
, Alternative Simulation Methods for Assessing Aerodynamic Drag in Realistic Crosswind, SAE Paper, pp.2014-2015, 2014.
, Investigation of the transient aerodynamic phenomena associated with passing manoeuvres, Journal of fluids and structures, vol.21, issue.3, pp.231-241, 2005.
, Wind-induced accidents of road vehicles, Accident Analysis & Prevention, vol.24, issue.6, pp.559-575, 1992.
,
, Truck aerodynamics reborn: lessons from the past. SAE transactions, vol.112, pp.132-142, 2003.
, A relationship between lift and lateral aerodynamic characteristics for passenger cars. SAE Technical Paper, 2010.
, Lateral aerodynamic characteristics of motor vehicles in transient crosswinds, 1994.
, The side load distribution on a Rover 800 saloon car under crosswind conditions, Journal of wind engineering and industrial aerodynamics, vol.60, pp.139-153, 1996.
, Aerodynamics of race cars, Annu Rev Fluid Mech, vol.38, pp.27-63, 2006.
, Improvement of vehicle aerodynamics by wake control, JSAE review, vol.16, issue.2, pp.151-155, 1995.
, Performance of an automotive under-body diffuser applied to a sedan and a wagon vehicle, SAE International Journal of Passenger Cars-Mechanical Systems, vol.6, issue.1, pp.293-307, 2013.
, Experimental parametric study of rectangular bodies with radiused edges in ground effect, Journal of Wind Engineering and Industrial Aerodynamics, vol.89, issue.14, pp.1291-1309, 2001.
, The aerodynamic performance of automotive underbody diffusers. SAE Technical Paper, 1998.
, Selecting automotive diffusers to maximise underbody downforce. SAE Technical Paper, 2000.