S. Arnoud, S. Thomas, P. Walter, and B. Markus, Integrated fuels and vehicles roadmap to 2030+, 2016.

N. Bloomberg, , 2017.

M. Yilmaz, Limitations/capabilities of electric machine technologies and modeling approaches for electric motor design and analysis in plug-in electric vehicle applications, Renewable and Sustainable Energy Reviews, vol.52, pp.80-99, 2015.

J. D. Widmer, R. Martin, and M. Kimiabeigi, Electric vehicle traction motors without rare earth magnets, Sustainable Materials and Technologies, vol.3, pp.7-13, 2015.

, Magnet

O. Gutfleisch, M. A. Willard, E. Bruck, C. H. Chen, S. G. Sankar et al., Magnetic materials and devices for the 21st century: stronger, lighter, and more energy efficient, Advanced materials, vol.23, issue.7, pp.821-842, 2011.

K. Binnemans, P. T. Jones, B. Blanpain, T. V. Gerven, Y. Yang et al., Recycling of rare earths: a critical review, Journal of Cleaner Production, vol.51, pp.1-22, 2013.

K. Binnemans, P. T. Jones, T. Müller, and L. Yurramendi, Rare Earths and the Balance Problem: How to Deal with Changing Markets, Journal of Sustainable Metallurgy, pp.1-21, 2018.

, European Commission, Directorate-General for Internal Market, Industry, Entrepreneurship and SMEs (2017) Study on the review of the list of Critical Raw Materials: executive summary

, Asian Metal

E. Alonso, A. M. Sherman, T. J. Wallington, M. P. Everson, F. R. Field et al., Evaluating rare earth element availability: a case with revolutionary demand from clean technologies, Environ. Sci. Technol, vol.46, issue.6, pp.3406-3414, 2012.

. Bloomberg, Rare Earth Metals Electrified by China's Illegal Mining Clean-Up

C. Hurst, China's Rare Earth Elements Industry: What Can the West Learn?, 2010.

, There's Cobalt Under the House, Congo

E. Balomenos, P. Davris, E. Deady, J. Yang, D. Panias et al.,

&. I. Paspaliaris, The EURARE project: Development of a sustainable exploitation scheme for Europe's Rare Earth Ore deposits, Johnson Matthey Technology Review, vol.61, issue.2, pp.142-153, 2017.

, Toyota develops new magnet for electric motors aiming to reduce use of critical rare-earth element by up to 50%

Y. Yang, A. Walton, and R. Sheridan, REE recovery from end-of-life NdFeB permanent magnet scrap: a critical review, Journal of Sustainable Metallurgy, vol.3, pp.122-149, 2017.

, European Training Network for the Design and Recycling of Rare-Earth Permanent Magnet Motors and Generators in Hybrid and Full Electric Vehicles

T. Elwert, D. Goldmann, F. Römer, M. Buchert, C. Merz et al., Current developments and challenges in the recycling of key components of (hybrid) electric vehicles, vol.1, pp.25-60, 2015.

N. A. Rowson, Policy Brief -Processing options and future possibilities for sustainable recycling of Hybrid Electric Vehicles and Internal Combustion Engine vehicles at vehicle recycling sites

S. Hanley, Mercedes To Add 48 Volt Mild Hybrid System to 2017 S Class

B. Mckay, 48V Architectures for Enabling High Efficiency, Powertrain technology & Innovation, 2016.

. Etelligentdrive, Think electric, think Magna

H. Sorger, The tailored engine & powertrain for 48V, Future powertrain conference, 2018.

L. Kumar and S. Jain, Electric propulsion system for electric vehicular technology: A review, Renewable and Sustainable Energy Reviews, vol.29, pp.924-940, 2014.

S. E. De-lucena, A survey on electric and hybrid electric vehicle technology, 2011.

M. Yilmaz, Limitations/capabilities of electric machine technologies and modeling approaches for electric motor design and analysis in plug-in electric vehicle applications, Renewable and Sustainable Energy Reviews, vol.52, pp.80-99, 2015.

L. Gang, J. Zhu, and Y. Guo, Multidisciplinary design optimization methods for electrical machines and drive systems, 2016.

D. G. Dorrell, A. M. Knight, M. Popescu, L. Evans, and D. A. Staton, Comparison of different motor design drives for hybrid electric vehicles, pp.3352-3359, 2010.

R. , 2015 -R240 electric motor manufacturing at the Renault Cléon plant

A. Chiba, K. Kiyota, N. Hoshi, M. Takemoto, and S. Ogasawara, Development of a rare-earth-free SR motor with high torque density for hybrid vehicles, IEEE Transactions on Energy Conversion, vol.30, issue.1, pp.175-182, 2015.

S. Kozuka, N. Tanabe, J. Asama, and A. Chiba, Power and Energy Society General Meeting-Conversion and Delivery of Electrical Energy in the 21st Century, pp.1-4, 2008.

K. Kiyota, T. Kakishima, and A. Chiba, Estimation and comparison of the windage loss of a 60 kW Switched Reluctance Motor for hybrid electric vehicles, Power Electronics Conference (IPEC-Hiroshima 2014-ECCE-ASIA), pp.3513-3518, 2014.

F. N. Isaac, A. A. Arkadan, and A. El-antably, Characterization of axially laminated anisotropic-rotor synchronous reluctance motors, IEEE Transactions on Energy Conversion, vol.14, pp.506-511, 1999.

F. Leonardi, P. J. Mccleer, and A. Elantably, Rotors for synchronous reluctance traction motors: a comparative study, Industry Applications Conference, Thirty-Fourth IAS Annual Meeting. Conference Record of the IEEE, pp.835-839, 1999.

R. M. Rajabi, Y. Liu, C. Monnay, and P. Tenca, Modular rotor for synchronous reluctance machine, 2009.

J. Kolehmainen, Synchronous reluctance motor with form blocked rotorm, IEEE Transactions on Energy Conversion, vol.25, issue.2, pp.450-456, 2010.

S. Morimoto, S. Masayuki, and T. Yoji, Performance of PM assisted synchronous reluctance motor for high efficiency and wide constant power operation, Industry Applications Conference, vol.1, pp.509-514, 2000.

N. Bianchi, S. Bolognani, D. Bon, and M. D. Pre, Rotor flux-barrier design for torque ripple reduction in synchronous reluctance and PM-assisted synchronous reluctance motors, IEEE Transactions on Industry Applications, vol.45, pp.921-928, 2009.

, MotorBrain project, pp.2011-2014

Z. Q. Zhu, Switched flux permanent magnet machines-Innovation continues, Electrical Machines and Systems (ICEMS), pp.1-10, 2011.

H. Yang, H. Lin, and Z. Q. Zhu, Recent Advances in Variable Flux Memory Machines for Traction Applications: A Review, CES Transactions on Electrical Machines and Systems, vol.2, issue.1, pp.34-50, 2018.

S. E. Rauch and L. J. Johnson, Design principles of flux-switch alternators, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems, vol.74, pp.1261-1268, 1955.

A. Jack, B. Mecrow, and P. Dickinson, Iron loss in machines with powdered iron stators, International Conference on Electric Machines and Drives (IEMD), pp.48-50, 1999.

K. Hioki, A. Hattori, and T. Iriyama, Development of Dy-Free Hot-Deformed Nd-Fe-B Magnets by Optimizing Chemical Composition and Microstructure, Journal of the Magnetics Society of Japan, vol.38, pp.79-82, 2014.

X. Tang, H. Sepehri-amin, T. Ohkubo, and K. Hono, Suppression of non-oriented grains in Nd-Fe-B hot-deformed magnets by Nb doping, Scripta Materialia, vol.147, pp.108-113, 2018.

. Shin-etsu, New alloying process by grain boundary diffusion, 2007.

. Techtalk, Grain Boundary Diffusion (GBD) Technology of Sintered NdFeB Magnet

W. F. Li, T. Ohkubo, K. Hono, and M. Sagawa, The origin of coercivity decrease in fine grained Nd-Fe-B sintered magnets, Journal of Magnetism and Magnetic Materials, vol.321, issue.8, pp.1100-1105, 2009.

C. R. Saha, Modelling theory and applications of the electromagnetic vibrational generator, Sustainable Energy Harvesting Technologies-Past, Present and Future, 2011.

B. M. Ma, J. W. Herchenroeder, B. Smith, M. Suda, D. N. Brown et al., Recent development in bonded NdFeB magnets, Journal of magnetism and magnetic materials, vol.239, pp.418-423, 2002.

Y. Honkura, The development of Dy free MAGFINE and its applications to motors, Symposium on "current research trends in magnetic materials, 2013.

R. Lee, E. Brewer, and N. Schaffel, Processing of neodymium-iron-boron melt-spun ribbons to fully dense magnets, IEEE Transactions on Magnetics, vol.21, issue.5, pp.1958-1963, 1985.

Y. Ying-chang, Z. Xiao-dong, K. Lin-shu, P. Qi, H. Yong-tian et al., Structural and magnetic properties of nitride compounds of the type R2Fe17Nx, R2Fe14BNx and RTiFe11Nx, Journal of the Less Common Metals, vol.170, issue.1, pp.37-44, 1991.

Y. Hirayama, T. Miyake, and K. Hono, Rare-earth lean hard magnet compound NdFe12 N, JOM, vol.67, issue.6, pp.1344-1349, 2015.

Y. Hirayama, Y. K. Takahashi, S. Hirosawa, and K. Hono, NdFe12Nx hard-magnetic compound with high magnetization and anisotropy field, Scripta Materialia, vol.95, pp.70-72, 2015.

U. Bast, F. Treffer, C. Thürigen, T. Elwert, and F. Marscheider-weidemann, Recycling von Komponenten und strategischen Metallen aus elektrischen Fahrantrieben, Recycling und Rohstoffe, Bd, vol.5, 2014.

T. Klier, F. Risch, and J. Franke, Disassembly, recycling, and reuse of magnet material of electric drives, IEEE International Symposium, pp.88-90, 2013.

J. Franke, B. Hofmann, J. Tremel, and A. Meyer, Innovative Methods for Automated Assembly and Fixation of Permanent Magnets in Electrical Machines, Procedia CIRP, vol.26, pp.724-728, 2015.

J. Tremel, B. Hofmann, and F. Risch, Handling and fixation of permanent magnets, Advanced Materials Research, vol.769, pp.3-10, 2013.

E. Joseph, J. Tremel, B. Hofmann, A. Meyer, J. Franke et al., Automated magnet assembly for large PM synchronous machines with integrated permanent magnets, Electric Drives Production Conference (EDPC), pp.1-6, 2013.

A. K. Jha, L. Garbuio, A. Kedous-lebouc, J. P. Yonnet, and J. M. Dubus, Design and comparison of outer rotor bonded magnets Halbach motor with different topologies, Electrical Machines, Drives and Power Systems, ELMA, 15th IEEE.International Conference, pp.6-10, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01534092

A. K. Jha, A. Kedous-lebouc, L. Garbuio, J. P. Yonnet, and J. M. Dubus, FEA based analysis on effect of slot pole combination on motor torque and magnet eddy current loss with bonded NdFeB Halbach rotor, Electrical Machines and Systems (ICEMS),20th International Conference, pp.1-5, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01582976

Z. Li, A. Kedous-lebouc, J. Dubus, L. Garbuio, and S. Personnaz, Reuse and Recycle Strategies of Rare Earth Permanent Magnets for PM Electrical Machines -an overview study, 3eme Symposium de Génie Electrique(SGE), 2018.

S. Högberg, J. Holboll, N. Mijatovic, B. B. Jensen, and F. B. Bendixen, Direct Reuse of Rare Earth Permanent Magnets-Coating Integrity, IEEE Transactions on Magnetics, vol.53, issue.4, pp.1-9, 2016.

S. Högberg, T. S. Pedersen, B. B. Jensen, N. Mijatovic, and J. Holboll, Direct Reuse of Rare Earth Permanent Magnets -Wind Turbine Generator Case Study, Electrical Machines (ICEM), 2016 XXII International Conference on. IEEE, pp.1625-1629, 2016.

P. Kjeldsteen, A. Sørensen, F. B. Bendixen-;-wo2010066251)-a-permanent-magnet-rotor-for-a-machine, A. Method-for, . Manufacturing-a-permanent et al., GRUNDFOS MANAGEMENT A/S, 2010.

S. Högberg, F. B. Bendixen, N. Mijatovic, B. B. Jensen, and J. Holb, Influence of demagnetization-temperature on magnetic performance of recycled Nd-Fe-B magnets, Electric Machines & Drives Conference (IEMDC), pp.1242-1246, 2015.

, Environmental initiatives -Denmark: Re-use of pre-consumed magnetic materials

I. Stamenkovic, N. Schofield, N. Milivojevic, M. Krishnamurthy, and A. Emadi, A novel modular permanent-magnet electric machine design, pp.997-1002, 2009.

S. T. Lundmark and M. Alatalo, A segmented claw-pole motor for traction applications considering recycling aspects, 8th International Conference and Exhibition, 2013.

M. Alatalo, S. T. Lundmark, and E. A. Grunditz, Electric Machine Design for Traction Applications Considering Recycling Aspects -Review and New Solution, IECON 2011-37th Annual Conference on IEEE Industrial Electronics Society, pp.1836-1841

Z. Q. Zhu and Y. X. Li, Modularity Techniques in High Performance Permanent Magnet Machines and Applications, CES Transactions on Electrical Machines and Systems, vol.2, issue.1, pp.93-103, 2018.

M. Kimiabeigi, R. S. Sheridan, J. D. Widmer, A. Walton, M. Farr et al., Production and Application of HPMS Recycled Bonded Permanent Magnets for a Traction Motor Application, IEEE Transactions on Industrial Electronics, vol.65, issue.5, pp.3795-3804, 2018.

J. D. Mcfarland, T. M. Jahns, A. M. El-refaie, and P. B. Reddy, Effect of magnet properties on power density and fluxweakening performance of high-speed interior permanent magnet synchronous machines, pp.4218-4225, 2014.

A. Pouramin, R. Dutta, and M. F. Rahman, Preliminary study on differences in the performance characteristics of concentrated and distributed winding IPM machines with different rotor topologies, pp.3565-3570, 2017.

M. Kimiabeigi, R. Long, J. D. Widmer, and Y. Gao, Comparative Assessment of Single Piece and Fir-Tree-Based Spoke Type Rotor Designs for Low-Cost Electric Vehicle Application, IEEE Trans. Energy Convers, vol.32, issue.2, pp.486-494, 2017.

, Shrink fiber sleeve -Innovative bandage solution for brushless motors

A. Negahdari and H. A. Toliyat, Post-assembly magnetization of rare-earth permanent magnet materials in permanent magnet assisted synchronous reluctance motors, Electric Machines and Drives Conference (IEMDC), pp.1-6, 2017.

. Techtalk, Introduction of Anisotropic Bonded Magnet, SDM Magnetics

, Direction of the Magnetic Force: The Right Hand Rule

H. Matsuoka, Proposal of Dy-free Nd anisotropic bonded magnet and its new applied motors, 22th Magnetic Application Technology Symposium, 2014.

&. Ron, . Zero-motorcycles, . Here's-the, . The, . Of-their et al., , 2018.

S. Meier, Theoretical design of surface-mounted permanent magnet motors with field-weakening capability, 2002.

C. Sadarngani, Electrical machines -Design and Analysis of Induction and Permanent Magnet Motors, 2016.

F. Magnussen and H. Lendenmann, Parasitic effects in PM machines with concentrated windings, IEEE transactions on industry applications, vol.43, issue.5, pp.1223-1232, 2007.

J. Pyrhonen, T. Jokinen, and V. Hrabovcova, Design of rotating electrical machines, vol.283, 2013.

J. F. Gieras, Advancements in electric machines, vol.102, 2008.

A. M. El-refaie, Fractional-slot concentrated-windings synchronous permanent magnet machines: Opportunities and challenges, IEEE Transactions on industrial Electronics, vol.57, issue.1, pp.107-121, 2010.

F. Magnussen and C. Sadarangani, Winding factors and Joule losses of permanent magnet machines with concentrated windings, Electric Machines and Drives Conference, IEMDC'03. IEEE International, pp.333-339, 2003.

F. Libert, Design, optimization and comparison of permanent magnet motors for a low-speed direct-driven mixer, 2004.

, Electric motor winding calculator, 2018.

M. Popescu, J. Goss, D. A. Staton, D. Hawkins, Y. C. Chong et al., Electrical Vehicles-Practical Solutions for Power Traction Motor Systems, IEEE Transactions on Industry Applications, vol.54, pp.2751-2762, 2018.

A. O. Di-tommaso, F. Genduso, R. Miceli, and C. Nevoloso, Procedure for the calculation of maximum slot filling factors in electrical machines, 12 th International Conference on. IEEE, pp.1-8, 2017.

M. C. Kulan, N. J. Baker, and J. D. Widmer, Design of a high fill factor permanent magnet integrated starter generator with compressed stator windings, Electrical Machines (ICEM), XXII International Conference on. IEEE, pp.1513-1519, 2016.

W. C. Duesterhoeft, M. W. Schulz, and E. Clarke, Determination of instantaneous currents and voltages by means of alpha, beta, and zero components, Transactions of the American Institute of Electrical Engineers, vol.2, pp.1248-1255, 1951.

, Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame, International Standard IEC 60404-2, Magnetic materials -Part, vol.2, 2008.

H. E. Tacca and C. Sullivan, Extended steinmetz equation, 2002.

F. Fiorillo, Characterization and measurement of magnetic materials, 2004.

, Estimating iron loss in opera-2d, Opera-2d User Guide, 2012.

F. Preisach, Über die magnetische Nachwirkung, Zeitschrift für Physik, vol.94, issue.5, pp.277-302, 1935.

A. Krings, Iron losses in electrical machines-Influence of material properties, manufacturing processes, and inverter operation, 2014.

C. Sadarangani, Electrical machines: Design and Analysis of induction and permanent magnet motors, 2006.

H. C. Karmaker, Stray losses in large synchronous machines, IEEE transactions on energy conversion, vol.7, issue.1, pp.148-153, 1992.

B. Aslan, E. Semail, and J. Legranger, Analytical model of magnet eddy-current volume losses in multi-phase PM machines with concentrated winding, pp.3371-3378, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00817557

R. Benlamine, T. Hamiti, F. Vangraefschèpe, and D. Lhotellier, Electromagnetic, mechanical and thermal analysis of a high-speed surface-mounted PM machine for automotive application, XXII International Conference (ICEM), pp.1662-1667, 2016.

A. Foggia, J. E. Torlay, C. Corenwinder, A. Audoli, and J. Herigault, Circulating current analysis in the parallel-connected windings of synchronous generators under abnormal operating conditions, International Conference IEMD'99. IEEE, pp.634-636, 1999.

M. Popescu and D. G. Dorrell, Proximity losses in the windings of high speed brushless permanent magnet AC motors with single tooth windings and parallel paths, IEEE Transactions on Magnetics, vol.49, issue.7, pp.3913-3916, 2013.

D. Bauer, P. Mamuschkin, H. C. Reuss, and E. Nolle, Influence of parallel wire placement on the AC copper losses in electrical machines, Electric Machines & Drives Conference (IEMDC), pp.1247-1253, 2015.

G. Dajaku, W. Xie, and D. Gerling, Reduction of low space harmonics for the fractional slot concentrated windings using a novel stator design, IEEE Transactions on Magnetics, vol.50, issue.5, pp.1-12, 2014.

Y. Zhao and T. A. Lipo, Space vector PWM control of dual three-phase induction machine using vector space decomposition, IEEE Transactions on industry applications, vol.31, issue.5, pp.1100-1109, 1995.

T. J. Miller and M. I. Mcgilp, Analysis of multi-phase permanent-magnet synchronous machines, Electrical Machines and Systems, ICEMS International Conference on. IEEE, pp.1-6, 2009.

J. Karttunen, S. Kallio, P. Peltoniemi, P. Silventoinen, and O. Pyrhonen, Dual three-phase permanent magnet synchronous machine supplied by two independent voltage source inverters, Proc. Int. SPEEDAM, pp.741-747, 2012.

J. Karttunen, S. Kallio, P. Peltoniemi, P. Silventoinen, and O. Pyrhönen, Decoupled vector control scheme for dual threephase permanent magnet synchronous machines, IEEE Transactions on Industrial Electronics, vol.61, issue.5, pp.2185-2196, 2014.

Y. Hu, Z. Q. Zhu, and M. Odavic, Comparison of two-individual current control and vector space decomposition control for dual three-phase PMSM, IEEE Transactions on Industry Applications, vol.53, issue.5, pp.4483-4492, 2017.

J. Millinger, O. Wallmark, and J. Soulard, High-Frequency Characterization of Losses in Fully Assembled Stators of Slotless PM Motors, IEEE Transactions on Industry Applications, vol.54, pp.2265-2275, 2018.

H. Kaihara, N. Takahashi, M. Nakano, M. Kawabe, T. Nomiyama et al., Effect of carrier frequency and circuit resistance on iron loss of electrical steel sheet under single-phase full-bridge PWM inverter excitation, IEEE Transactions on Magnetics, vol.48, issue.11, pp.3454-3457, 2012.

A. Boehm and I. Hahn, Influence of pulse width modulation (PWM) on the iron losses of electrical steel, Power Electronics Conference, pp.283-288, 2014.

A. G. Gonzalez, J. Millinger, and J. Soulard, Magnet losses in inverter-fed two-pole PM machines, In : Electrical Machines (ICEM), XXII International Conference on. IEEE, pp.1854-1860, 2016.

I. Husain and M. Ehsani, Torque ripple minimization in switched reluctance motor drives by PWM current control, IEEE transactions on power electronics, vol.11, issue.1, pp.83-88, 1996.

L. Mingji, G. Hanjin, and S. Meihong, Ripple torque analysis and simulation of BLDC motor with different PWM modes, Power Electronics and Motion Control Conference (IPEMC), 7th International. IEEE, pp.973-977, 2012.

J. Fang, H. Li, and B. Han, Torque ripple reduction in BLDC torque motor with nonideal back EMF, IEEE transactions on power electronics, vol.27, issue.11, pp.4630-4637, 2012.

. Jamg-designer,

K. Emetor,

A. M. El-refaie, M. R. Shah, R. Qu, and J. M. Kern, Effect of number of phases on losses in conducting sleeves of surface PM machine rotors equipped with fractional-slot concentrated windings, IEEE Transactions on Industry Applications, vol.44, issue.5, pp.1522-1532, 2008.

M. R. Shah and A. M. El-refaie, Eddy-current loss minimization in conducting sleeves of surface PM machine rotors with fractional-slot concentrated armature windings by optimal axial segmentation and copper cladding, IEEE Transactions on Industry Applications, vol.45, issue.2, pp.720-728, 2009.

Y. Pang, Z. Q. Zhu, and D. Howe, Analytical determination of optimal split ratio for permanent magnet brushless motors, IEE Proceedings-Electric Power Applications, vol.153, issue.1, pp.7-13, 2006.

J. Goss, R. Wrobel, P. Mellor, and D. Staton, The design of AC permanent magnet motors for electric vehicles: A design methodology, Electric Machines & Drives Conference (IEMDC), pp.871-878, 2013.

R. Islam, I. Husain, A. Fardoun, and K. Mclaughlin, Permanent-Magnet Synchronous Motor Magnet Designs With Skewing for Torque Ripple and Cogging Torque Reduction, IEEE Trans. Ind. Appl, vol.45, issue.1, pp.152-160, 2009.

W. Q. Chu and Z. Q. Zhu, Investigation of Torque Ripples in Permanent Magnet Synchronous Machines With Skewing, IEEE Trans. Magn, vol.49, issue.3, pp.1211-1220, 2013.

K. I. Laskaris and A. G. Kladas, Permanent-magnet shape optimization effects on synchronous motor performance, IEEE Transactions on Industrial Electronics, vol.58, pp.3776-3783, 2011.

Z. S. Du and T. A. Lipo, High torque density and low torque ripple surface permanent magnet machines with sinusoidal plus third harmonic shaped magnets, Electric Machines and Drives Conference (IEMDC, pp.1-8, 2017.

B. Aslan, E. Semail, and J. Legranger, General Analytical Model of Magnet Average Eddy-Current Volume Losses for Comparison of Multiphase PM Machines With Concentrated Winding, IEEE Transactions on Energy Conversion, vol.29, issue.1, pp.72-83, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01009626

S. Tizianel and N. Novello, Permanent magnet demagnetization process considering the inclination of the demag field, IEEE Transactions on Magnetics, vol.52, issue.8, pp.1-7, 2016.

P. Peng, H. Xiong, J. Zhang, W. Li, F. Leonardi et al., Effects of external field orientation on permanent magnet demagnetization, IEEE Transactions on Industry Applications, vol.53, issue.4, pp.3438-3446, 2017.

, Issue 4 Material Modeling and Powerful Analysis Capabilities that Contribute to Limit Design, JMAG Technical Report

T. Matsuo, D. Shimode, Y. Terada, and M. Shimasaki, Application of stop and play models to the representation of magnetic characteristics of silicon steel sheet, IEEE transactions on magnetics, vol.39, pp.1361-1364, 2003.

K. Narita, T. Asanuma, K. Semba, H. Sano, T. Yamada et al., An accurate iron loss evaluation method based on finite element analysis for switched reluctance motors, pp.4413-4417, 2015.

T. A. Burress, C. L. Coomer, S. L. Campbell, L. E. Seiber, L. D. Marlino et al., Evaluation of the 2007 Toyota Camry hybrid synergy drive system, 2008.

F. Gillon and P. Brochet, Screening and response surface method applied to the numerical optimization of electromagnetic devices, IEEE transactions on magnetics, vol.36, pp.1163-1167, 2000.

C. Tang, W. L. Soong, T. M. Jahns, and N. Ertugrul, Analysis of iron loss in interior PM machines with distributed windings under deep field weakening, IEEE Transactions on Industry Applications, vol.51, issue.5, pp.3761-3772, 2015.

&. Wltp,

A. Fitzgerald, C. Kingsley, and S. Umans, Parameter determination from no-load and block-rotor tests, Electric Machinery, 2003.

R. S. Sheridan, A. J. Williams, I. R. Harris, and A. Walton, Improved HDDR processing route for production of anisotropic powder from sintered NdFeB type magnets, Journal of Magnetism and Magnetic Materials, vol.350, pp.114-118, 2014.

R. S. Sheridan, R. Sillitoe, M. Zakotnik, I. R. Harris, and A. J. Williams, Anisotropic powder from sintered NdFeB magnets by the HDDR processing route, Journal of Magnetism and Magnetic Materials, vol.324, issue.1, pp.63-67, 2012.

M. Zakotnik, I. R. Harris, and A. J. Williams, Multiple recycling of NdFeB-type sintered magnets, Journal of Alloys and Compounds, vol.469, issue.1-2, pp.314-321, 2009.

H. Jin, P. Afiuny, S. Dove, G. Furlan, M. Zakotnik et al., Life Cycle Assessment of Neodymium-Iron-Boron Magnet-to-Magnet Recycling for Electric Vehicle Motors, Environ. Sci. Technol. Journal, vol.52, issue.6, pp.3796-3802, 2018.

P. Lazari, J. Wang, and L. Chen, A Computationally Efficient Design Technique for Electric-Vehicle Traction Machines, IEEE Trans. on Industry Applications, vol.50, issue.5, pp.3203-3213, 2014.

N. Kim, S. Cha, and H. Peng, Optimal control of hybrid electric vehicles based on Pontryagin's minimum principle, IEEE Transactions on Control Systems Technology, vol.19, issue.5, pp.1279-1287, 2011.

D. Sinoquet, G. Rousseau, and Y. Milhau, Design optimization and optimal control for hybrid vehicles, Optimization and Engineering, vol.12, issue.2, pp.199-213, 2011.
URL : https://hal.archives-ouvertes.fr/hal-02284149

Z. Li, A. Kedous-lebouc, R. Fratila, J. Legranger, J. Dubus et al., Investigation on surface mounted PM machines with magnet recycling concept for hybrid electrical vehicle applications, International Conference on Electrical Machines and Systems (ICEMS 2017), pp.10-14, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02330515

A. Jha, Z. Li, A. Garcia, P. Upadhayay, P. O. Rasmussen et al., Weighted Index of Recycling and Energy (WIRE) Cost for Motors in Electric Vehicles, International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), pp.20-22, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01837013

A. Garcia, A. Jha, Z. Li, P. Upadhayay, and P. O. Rasmussen, Validation of Efficiency Maps of an Outer Rotor Surface Mounted Permanent Magnet Machine for Evaluation of Recyclability of Magnets, International Magnetic Conference (INTERMAG), pp.1-6, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01840455

Z. Li, A. Kedous-lebouc, J. Dubus, L. Garbuio, and S. Personnaz, Reuse and Recycle Strategies of Rare Earth Permanent Magnets for Electrical Machines -an overview study, p.3

, Symposium de Génie Electrique (SGE, pp.3-5, 2018.

P. Upadhayay, A. G. Garcia, Z. Li, A. Jha, P. O. Rasmussen et al., Evaluation of Energy Cost Index for an Electric Vehicle Motor over a particular Drive Cycle with Recycled Magnet Concept, XXIIIrd International Conference on Electrical Machines (ICEM), pp.3-6
URL : https://hal.archives-ouvertes.fr/hal-01915447

. September, , 2018.

Z. Li, A. Kedous-lebouc, J. Dubus, J. Legranger, and R. Fratila, Investigation on IPMSM machines with Dy-free magnets and magnets recycling concept for hybrid electrical vehicle applications, International conferences on magnetism: the IEEE International Magnetics Conference and the Conference on Magnetism and Magnetic Materials (MMM-INTERMAG), pp.14-18, 2019.

Z. Li, A. Kedous-lebouc, J. M. Dubus, L. Garbuio, and S. Personnaz, Reuse and Recycle Strategies of Rare Earth Permanent Magnets for PM Electrical Machines-an overview study, Eur. Phys. J. Appl. Phys, vol.86, p.20901, 2019.