, Improvement of extrusion die design by using electro-polishing method for better flow and maintain consistency in the internal surfaces of the flow channels

, Theoretical calculations of polymer flow through the spinneret and its validation from experimental results

J. W. Hearle, Fibre structure: its formation and relation to performance, in Handbook of Textile Fibre Structure, vol.1, pp.3-21, 2009.

H. A. Youssef, H. A. El-hofy, and M. H. Ahmed, Polymeric Materials and Their Processing, Manufacturing Technology: Materials, Processes, and Equipment, 2011.

A. Bhargava, Engineering Materials: Polymers, Ceramics and Composites, 2012.

G. Akovall and N. Uyanik, Introduction, in Handbook of composite fabrication, Rapra Technology Ltd, pp.3-20, 2001.

M. B. Kechiche, F. Bauer, O. Harzallah, and J. Y. Drean, Development of piezoelectric coaxial filament sensors P(VDF-TrFE)/copper for textile structure instrumentation, Sensors and Actuators A: Physical, vol.204, pp.122-130, 2013.

T. H. Lim, S. H. Lee, and S. Y. Yeo, Highly conductive polymer/metal/carbon nanotube composite fiber prepared by the melt-spinning process, Textile Research Journal, 2016.

R. S. Martins, R. Gonçalves, T. Azevedo, J. G. Rocha, J. M. Nóbrega et al., Piezoelectric coaxial filaments produced by coextrusion of poly(vinylidene fluoride) and electrically conductive inner and outer layers, Journal of Applied Polymer Science, issue.17, p.131, 2014.

A. Pecora, L. Maiolo, F. Maita, and A. Minotti, Flexible PVDF-TrFE pyroelectric sensor driven by polysilicon thin film transistor fabricated on ultrathin polyimide substrate, Sensors and Actuators A: Physical, vol.185, pp.39-43, 2012.

Z. Yildiz, O. Atak, A. Güngör, A. Önen, and ?. Usta, The effect of various dopant types for chemical oxidation polymerization of pyrrole on electromagnetic shielding, electrical conductivity and thermal properties of cotton fabrics, 2nd International Conference on Value Addition and Innovation in Textile (Covitex), pp.86-94, 2013.

A. Güngör, A. Önen, ?. Usta, Z. Yildiz, and O. Atak, Electromagnetic shielding, electrical and thermal properties of conductive polymer coated cotton fabrics, 2nd International Conference on Value Addition & Innovation in Textiles, pp.310-316, 2013.

A. Schwarz, J. Hakuzimana, P. Westbroek, G. D. Mey, G. Priniotakis et al., A study on the morphology of thin copper films on para-aramid yarns and their influence on the yarn's electro-conductive and mechanical properties, Textile Research Journal, vol.82, issue.15, pp.1587-1596, 2012.

B. K. Little, Y. Li, V. Cammarata, R. Broughton, and G. Mills, Metallization of Kevlar Fibers with Gold, ACS applied materials & interfaces, vol.3, issue.6, pp.1965-1973, 2011.

S. Lee, S. Shin, S. Lee, J. Seo, J. Lee et al., Ag Nanowire Reinforced Highly Stretchable Conductive Fibers for Wearable Electronics, Advanced Functional Materials, vol.25, issue.21, pp.3114-3121, 2015.

C. Hu, S. Chang, and N. Liang, Preparation and characterization of carbon black/polybutylene terephthalate/polyethylene terephthalate antistatic fiber with sheath-core structure, The Journal of The Textile Institute, vol.107, issue.8, pp.976-984, 2015.

X. Liu, X. Zhou, Y. Li, and Z. Zheng, Surface-Grafted Polymer-Assisted Electroless Deposition of Metals for Flexible and Stretchable Electronics, Chemistry -An Asian Journal, vol.7, issue.5, pp.862-870, 2012.

T. Kannaian, R. Neelaveni, and G. Thilagavathi, Design and development of embroidered textile electrodes for continuous measurement of electrocardiogram signals, Journal of Industrial Textiles, vol.42, issue.3, pp.303-318, 2013.

Z. Zhiyi, Electrical conductive Cu/glass fibre composites prepared by electroless plating, Micro & Nano Letters, vol.9, issue.2, pp.83-86, 2014.

N. Behabtu, C. C. Young, D. E. Tsentalovich, O. Kleinerman, X. Wang et al., Multifunctional Fibers of Carbon Nanotubes with Ultrahigh Conductivity, Science, vol.339, issue.6116, pp.182-186, 2013.

H. R. Pant, D. R. Pandeya, K. T. Nam, W. Baek, S. T. Hong et al., Photocatalytic and antibacterial properties of a TiO2/nylon-6 electrospun nanocomposite mat containing silver nanoparticles, Journal of Hazardous Materials, vol.189, issue.1-2, pp.465-471, 2011.

N. V. Bhat, D. T. Seshadri, and S. Radhakrishnan, Preparation, Characterization, and Performance of Conductive Fabrics: Cotton + PANi, Textile Research Journal, vol.74, issue.2, pp.155-166, 2004.

G. ;. Reese and . Long, Polyester Fibers: Fiber Formation and End-Use Applications, in Modern Polyesters: Chemistry and Technology of Polyesters and Copolyesters, pp.399-433, 2004.

K. Rajendrakumar and G. Thilagavathi, A study on the effect of construction parameters of metallic wire/core spun yarn based knitted fabrics on electromagnetic shielding, Journal of Industrial Textiles, vol.42, issue.4, pp.400-416, 2013.

I. Ozkan, P. D. Baykal, and M. Karaaslan, Investigation of electromagnetic polarization properties of silver contaning Robotuft carpets, 16th AUTEX World Textile Conference, 2016.

C. I. Su and C. S. Leu, Cross-Sectional Structure of Composite Yarns, Textile Research Journal, vol.68, issue.10, pp.715-718, 1998.

W. Wu and J. Lee, Twist in the Spinning of a Composite Yarn, Textile Research Journal, vol.65, issue.9, pp.522-526, 1995.

M. Okamoto and K. Watanabe, Spontaneously crimping synthetic composite filament and process of manufacturing the same, 1973.

J. Michael and J. E. Anthony, Polyester Fibers, Handbook of Fiber Chemistry, M. Lewin. Third, vol.8, 2006.

T. Shyr and J. Shie, Electromagnetic shielding mechanisms using soft magnetic stainless steel fiber enabled polyester textiles, Journal of Magnetism and Magnetic Materials, vol.324, issue.23, pp.4127-4132, 2012.

T. David, Splittable composite filament, 1968.

E. Han, Y. Wang, X. Chen, G. Shang, W. Yu et al., Consecutive Large-Scale Fabrication of Surface-Silvered Polyimide Fibers via an Integrated Direct Ion-Exchange Self-Metallization Strategy, ACS applied materials & interfaces, issue.5, pp.4293-4301, 2013.

Q. Wei, L. Yu, N. Wu, and S. Hong, Preparation and Characterization of Copper Nanocomposite Textiles, Journal of Industrial Textiles, vol.37, issue.3, pp.275-283, 2008.

Y. Lu, Q. Liang, and L. Xue, Palladium-free catalytic electroless copper deposition on bamboo fabric: Preparation, morphology and electromagnetic properties, Applied Surface Science, vol.258, issue.10, pp.4782-4787, 2012.

G. Cho and A. Han, Review of performance evaluation on e-textiles and textilebased keypads, International Journal of Fashion Design, vol.4, issue.2, pp.83-89, 2011.

A. I. Neves, T. H. Bointon, L. V. Melo, S. Russo, I. De-schrijver et al., Transparent conductive graphene textile fibers, Scientific Reports, vol.5, p.9866, 2015.

M. I. Panhuis, J. Wu, S. A. Ashraf, and G. G. Wallace, Conducting textiles from single-walled carbon nanotubes. Synthetic Metals, vol.157, pp.358-362, 2007.

D. S. Hecht, L. Hu, and G. Grüner, Electronic properties of carbon nanotube/fabric composites, Current Applied Physics, vol.7, issue.1, pp.60-63, 2007.

R. Dastjerdi and M. Montazer, A review on the application of inorganic nanostructured materials in the modification of textiles: Focus on anti-microbial properties, Colloids and Surfaces B: Biointerfaces, vol.79, issue.1, pp.5-18, 2010.

T. Okuhashi, Carpet having durable antistatic properties. 1971. U. S. Patent, US3582445 A

W. Zhang, Y. Y. Tan, C. Wu, and S. R. Silva, Self-assembly of single walled carbon nanotubes onto cotton to make conductive yarn, Particuology, vol.10, issue.4, pp.517-521, 2012.

C. T. Huang, C. L. Shen, C. F. Tang, and S. H. Chang, A wearable yarn-based piezo-resistive sensor, Sensors and Actuators A: Physical, vol.141, issue.2, pp.396-403, 2008.

C. T. Huang, C. F. Tang, M. C. Lee, and S. H. Chang, Parametric design of yarnbased piezoresistive sensors for smart textiles, Sensors and Actuators A: Physical, vol.148, issue.1, pp.10-15, 2008.

J. Green, Cotton/nylon fiber blends suitable for durable light shade fabric containing carbon doped antistatic fibers, 1999.

S. Jiang, E. Newton, C. M. Yuen, and C. Kan, Application of chemical silver plating on polyester and cotton blended fabric, Textile Research Journal, vol.77, issue.2, pp.85-91, 2007.

S. Q. Jiang, E. Newton, C. W. Yuen, and C. W. Kan, Chemical silver plating and its application to textile fabric design, Journal of Applied Polymer Science, vol.96, issue.3, pp.919-926, 2005.

S. Egusa, Z. Wang, N. Chocat, Z. M. Ruff, A. M. Stolyarov et al., Multimaterial piezoelectric fibres, Nature Materials, vol.9, issue.8, pp.643-648, 2010.

S. Zhu, J. So, R. Mays, S. Desai, W. R. Barnes et al., Ultrastretchable Fibers with Metallic Conductivity Using a Liquid Metal Alloy Core, Advanced Functional Materials, issue.23, pp.2308-2314, 2013.

X. Shi, Y. Hu, F. Fu, J. Zhou, Y. Wang et al., Construction of PANI-cellulose composite fibers with good antistatic properties, Journal of Materials Chemistry A, vol.2, issue.21, pp.7669-7673, 2014.

H. H. Lee, K. S. Chou, and Z. W. Shih, Effect of nano-sized silver particles on the resistivity of polymeric conductive adhesives, International Journal of Adhesion and Adhesives, vol.25, issue.5, pp.437-441, 2005.

M. Xu, J. Q. Feng, and X. L. Cao, Electrical properties of nanosilver/polyacrylamide/ethylene vinyl acetate composite, Journal of Shanghai University (English Edition), vol.12, issue.1, pp.85-90, 2008.

L. Nicolais and G. Carotenuto, Metal-Polymer nanocomposites, 2004.

P. C. Ma, B. Z. Tang, and J. Kim, Effect of CNT decoration with silver nanoparticles on electrical conductivity of CNT-polymer composites, Carbon, vol.46, issue.11, pp.1497-1505, 2008.

F. M. Kelly and J. H. Johnston, Colored and Functional Silver Nanoparticle?Wool Fiber Composites, ACS applied materials & interfaces, vol.3, issue.4, pp.1083-1092, 2011.

H. Deng, R. Zhang, C. T. Reynolds, E. Bilotti, and T. Peijs, A Novel Concept for Highly Oriented Carbon Nanotube Composite Tapes or Fibres with High Strength and Electrical Conductivity, Macromolecular Materials and Engineering, vol.294, issue.11, pp.749-755, 2009.

W. Yi, Y. Wang, G. Wang, and X. Tao, Investigation of carbon black/silicone elastomer/dimethylsilicone oil composites for flexible strain sensors, Polymer Testing, vol.31, issue.5, pp.677-684, 2012.

E. G. Jordan, Electrically conductive tapes and processes, 1998.

H. S. Bahia, Electrically conductive materials. 1990. U. S. Patent, US4902562 A

H. Tanaka, T. Koseki, and S. Fujii, Antistatic acrylic fiber, 1978.

K. Dai, X. Xu, and Z. Li, Electrically conductive carbon black (CB) filled in situ microfibrillar poly(ethylene terephthalate) (PET)/polyethylene (PE) composite with a selective CB distribution. Polymer, vol.48, pp.849-859, 2007.

R. Zhang, H. Deng, R. Valenca, J. Jin, Q. Fu et al., Strain sensing behaviour of elastomeric composite films containing carbon nanotubes under cyclic loading, Composites Science and Technology, vol.74, pp.1-5, 2013.

Z. Li, G. Luo, F. Wei, and Y. Huang, Microstructure of carbon nanotubes/PET conductive composites fibers and their properties, Composites Science and Technology, vol.66, issue.7-8, pp.1022-1029, 2006.

H. Ma, J. Zeng, M. L. Realff, S. Kumar, and D. A. Schiraldi, Processing, structure, and properties of fibers from polyester/carbon nanofiber composites, Composites Science and Technology, vol.63, issue.11, pp.1617-1628, 2003.

X. Liu, Z. D. Huang, S. W. Oh, B. Zhang, P. Ma et al., Carbon nanotube (CNT)-based composites as electrode material for rechargeable Li-ion batteries: A review, Composites Science and Technology, vol.72, issue.2, pp.121-144, 2012.

E. T. Thostenson, Z. Ren, and T. Chou, Advances in the science and technology of carbon nanotubes and their composites: a review, Composites Science and Technology, vol.61, issue.13, pp.1899-1912, 2001.

R. Taipalus, T. Harmia, M. Q. Zhang, and K. Friedrich, The electrical conductivity of carbon-fibre-reinforced polypropylene/polyaniline complexblends: experimental characterisation and modelling, Composites Science and Technology, vol.61, issue.6, pp.801-814, 2001.

L. Shen, F. Q. Wang, H. Yang, and Q. R. Meng, The combined effects of carbon black and carbon fiber on the electrical properties of composites based on polyethylene or polyethylene/polypropylene blend, Polymer Testing, vol.30, issue.4, pp.442-448, 2011.

O. A. Al-hartomy, F. Al-solamy, A. A. Al-ghamdi, M. A. Ibrahim, N. Dishovsky et al., Pressure Sensors Based on Polyvinyl Chloride/Graphite/Nickel Nanocomposites, Journal of Elastomers and Plastics, vol.43, issue.2, pp.137-153, 2011.

M. Rusu, N. Sofian, and D. Rusu, Mechanical and thermal properties of zinc powder filled high density polyethylene composites, Polymer Testing, vol.20, issue.4, pp.409-417, 2001.

W. Bauhofer and J. Z. Kovacs, A review and analysis of electrical percolation in carbon nanotube polymer composites, Composites Science and Technology, vol.69, issue.10, pp.1486-1498, 2009.

H. Deng, T. Skipa, E. Bilotti, R. Zhang, D. Lellinger et al., Preparation of High-Performance Conductive Polymer Fibers through Morphological Control of Networks Formed by Nanofillers, Advanced Functional Materials, vol.20, issue.9, pp.1424-1432, 2010.

C. Li, E. T. Thostenson, and T. Chou, Sensors and actuators based on carbon nanotubes and their composites: A review, Composites Science and Technology, vol.68, issue.6, pp.1227-1249, 2008.

J. Kohler, Inherently conductive polymer Technology opportunity, 2013.

M. Biron, Plastics Solutions for Practical Problems, Thermoplastics and Thermoplastic Composites, B. Michel, pp.831-984

B. Lin, G. A. Gelves, J. A. Haber, and U. Sundararaj, Electrical, Rheological, and Mechanical Properties of Polystyrene/Copper Nanowire Nanocomposites. Industrial & engineering chemistry research, vol.46, pp.2481-2487, 2007.

M. S. Kim, H. K. Kim, S. W. Byun, S. H. Jeong, Y. K. Hong et al., PET fabric/polypyrrole composite with high electrical conductivity for EMI shielding, Synthetic Metals, vol.126, issue.2-3, pp.233-239, 2002.

W. Ye, J. Zhu, X. J. Liao, S. H. Jiang, Y. H. Li et al., Hierarchical three-dimensional micro/nano-architecture of polyaniline nanowires wrapped-on polyimide nanofibers for high performance lithium-ion battery separators, Journal of Power Sources, vol.299, pp.417-424, 2015.

T. H. Lim, K. W. Oh, and S. H. Kim, Polypyrrole/MWCNT-gr-PSSA composite for flexible and highly conductive transparent film, Journal of Applied Polymer Science, vol.123, issue.1, pp.388-397, 2012.

C. Hu, S. He, S. Jiang, S. Chen, and H. Hou, Natural source derived carbon paper supported conducting polymer nanowire arrays for high performance supercapacitors, vol.5, pp.14441-14447, 2015.

T. H. Lim, K. W. Oh, and S. H. Kim, Self-assembly supramolecules to enhance electrical conductivity of polyaniline for a flexible organic solar cells anode, Solar Energy Materials and Solar Cells, vol.101, pp.232-240, 2012.

J. Saba, Y. Magga, D. He, F. Miomandre, and J. Bai, Continuous electrodeposition of polypyrrole on carbon nanotube-carbon fiber hybrids as a protective treatment against nanotube dispersion, Carbon, vol.51, pp.20-26, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00757004

J. Priestley, A familiar introduction to the study of electricity, vol.1, pp.69-70

H. Zhang and X. Tao, A single-layer stitched electrotextile as flexible pressure mapping sensor, Journal of The Textile Institute, vol.103, issue.11, pp.1151-1159, 2012.

F. Khoffi, N. Khenoussi, O. Harzallah, and J. Y. Drean, Mechanical behavior of polyethylene terephthalate/copper composite filament, Physics Procedia, vol.21, pp.240-245, 2011.

P. Rujitanaroj, N. Pimpha, and P. Supaphol, Wound-dressing materials with antibacterial activity from electrospun gelatin fiber mats containing silver nanoparticles, Polymer, vol.49, issue.21, pp.4723-4732, 2008.

R. Ma, J. Lee, D. Choi, H. Moon, and S. Baik, Knitted Fabrics Made from Highly Conductive Stretchable Fibers, Nano letters, vol.14, issue.4, pp.1944-1951, 2014.

R. Chen, Y. Li, and J. He, Bubbfil spinning for mass-production of nanofibers, Thermal Science, vol.18, issue.5, pp.1718-1719, 2014.

A. Afzal, J. Y. Drean, N. Khenoussi, N. A. Akhtar, and S. Ahmad, Influence of drawing parameter on the development of composite polymeric technical filaments, 3rd International Conference on value addition and innovation in textiles, pp.119-123, 2015.

A. Laforgue, M. F. Champagne, J. Dumas, and L. Robitaille, Melt-Processing and Properties of Coaxial Fibers Incorporating Carbon Nanotubes, Journal of Engineered Fibers and Fabrics, vol.7, issue.3, pp.118-124, 2012.

A. Laforgue, G. Rouget, S. Dubost, M. F. Champagne, and L. Robitaille, Multifunctional Resistive-Heating and Color-Changing Monofilaments Produced by a Single-Step Coaxial Melt-Spinning Process, ACS applied materials & interfaces, vol.4, issue.6, pp.3163-3168, 2012.

J. N. Coleman, U. Khan, and Y. K. Gun'ko, Mechanical Reinforcement of Polymers Using Carbon Nanotubes, Advanced Materials, vol.18, issue.6, pp.689-706, 2006.

Z. Wang, P. Ciselli, and T. Peijs, The extraordinary reinforcing efficiency of single-walled carbon nanotubes in oriented poly(vinyl alcohol) tapes. Nanotechnology, vol.18, p.455709, 2007.

R. Zhang, A. Dowden, H. Deng, M. Baxendale, and T. Peijs, Conductive network formation in the melt of carbon nanotube/thermoplastic polyurethane composite, Composites Science and Technology, vol.69, issue.10, pp.1499-1504, 2009.

M. Wu, Q. Wang, K. Li, Y. Wu, and H. Liu, Optimization of stabilization conditions for electrospun polyacrylonitrile nanofibers, vol.97, pp.1511-1519, 2012.

A. El-salmawy, M. Miyamoto, and Y. Kimura, Preparing a Core-Sheath Bicomponent Fiber of Poly(butylene Terephthalate)/Poly(butylene Succinate-co-L-lactate), Textile Research Journal, vol.70, issue.11, pp.1011-1018, 2000.

A. El-salmawy and Y. Kimura, Structure and Properties of Bicomponent Core-Sheath Fibers from Poly(ethylene Terephthalate) and Biodegradable Aliphatic Polyesters, Textile Research Journal, vol.71, issue.2, pp.145-152, 2001.

R. Hufenus, F. A. Reifler, K. Maniura-weber, A. Spierings, and M. Zinn, Biodegradable Bicomponent Fibers from Renewable Sources: Melt-Spinning of Poly(lactic acid) and Poly

, Macromolecular Materials and Engineering, vol.297, issue.1, pp.75-84, 2012.

J. Luo, F. Wang, D. Li, and B. Xu, Elasticity of woven fabrics made of polytri-methylene terephthalate/ polyethylene terephthalate bicomponent filaments, Textile Research Journal, vol.81, issue.8, pp.865-870, 2011.

H. H. Cho, K. H. Kim, Y. A. Kang, H. Ito, and T. Kikutani, Fine structure and physical properties of polyethylene/poly(ethylene terephthalate) bicomponent fibers in high-speed spinning. I. Polyethylene sheath/poly(ethylene terephthalate) core fibers, Journal of Applied Polymer Science, vol.77, issue.10, pp.2254-2266, 2000.

S. Tomioka and M. Kojima, Spinnability and adhesiveness of polypropylenepolyethylene bicomponent fibers. Sen'i Gakkaishi, vol.35, pp.542-547, 1979.

W. H. Hills, Spin pack and method for producing conjugate fibers, 1983.

T. David, Composite filament, 1964.

T. Naruse, T. Osagawa, H. Naito, M. Matsui, and K. Okamoto,

H. Wang, X. Jin, N. Mao, and S. J. Russell, Differences in the Tensile Properties and Failure Mechanism of PP/PE Core/Sheath Bicomponent and PP Spunbond Fabrics in Uniaxial Conditions, Textile Research Journal, vol.80, issue.17, pp.1759-1767, 2010.

E. Sancak, M. Yuksek, ?. Usta, M. Akalin, M. Uzun et al., An investigation of electromagnetic shielding effectiveness of knitting fabrics with different metal wire, 2nd International Conference on Value Addition & Innovation in Textiles, pp.46-55, 2013.

A. Bedeloglu, N. Sunter, B. Yildirim, and Y. Bozkurt, Bending and tensile properties of cotton/metal wire complex yarns produced for electromagnetic shielding and conductivity applications, Journal of The Textile Institute, vol.103, issue.12, pp.1304-1311, 2012.

Z. Liu and X. Wang, Relation between shielding effectiveness and tightness of electromagnetic shielding fabric, Journal of Industrial Textiles, vol.43, issue.2, pp.302-316, 2013.

H. G. Ortlek, T. Alpyildiz, and G. Kilic, Determination of electromagnetic shielding performance of hybrid yarn knitted fabrics with anechoic chamber method, Textile Research Journal, vol.83, issue.1, pp.90-99, 2013.

J. R. Green, Yarns suitable for durable light shade cotton/nylon clothing fabrics containing carbon doped antistatic fibers, 2000.

A. Lund and B. Hagström, Melt spinning of ?-phase poly(vinylidene fluoride) yarns with and without a conductive core, Journal of Applied Polymer Science, vol.120, issue.2, pp.1080-1089, 2011.

A. Lund, C. Jonasson, C. Johansson, D. Haagensen, and B. Hagström, Piezoelectric polymeric bicomponent fibers produced by melt spinning, Journal of Applied Polymer Science, vol.126, issue.2, pp.490-500, 2012.

B. Glauß, W. Steinmann, S. Walter, M. Beckers, G. Seide et al., Spinnability and Characteristics of Polyvinylidene Fluoride (PVDF)-based Bicomponent Fibers with a Carbon Nanotube (CNT) Modified Polypropylene Core for Piezoelectric Applications, Materials, issue.6, p.2642, 2013.

D. R. Hull, Synthetic filament having antistatics properties. 1974. U. S. Patent, US3803453 A

M. Strååt, M. Rigdahl, and B. Hagström, Conducting bicomponent fibers obtained by melt spinning of PA6 and polyolefins containing high amounts of carbonaceous fillers, Journal of Applied Polymer Science, vol.123, issue.2, pp.936-943, 2012.

A. Schwarz, J. Hakuzimana, A. Kaczynska, J. Banaszczyk, P. Westbroek et al., Gold coated para-aramid yarns through electroless deposition, Surface and Coatings Technology, vol.204, issue.9, pp.1412-1418, 2010.

R. Alagirusamy, J. Eichhoff, T. Gries, and S. Jockenhoevel, Coating of conductive yarns for electro-textile applications, Journal of The Textile Institute, vol.104, issue.3, pp.270-277, 2013.

H. Sato, K. Takagi, L. Yu, and M. Nagamine, Metal Core Piezoelectric Complex Fiber and Application for Smart System, MRS Proceedings, 2005.

R. Cornock, S. Beirne, and G. G. Wallace, Development of a Coaxial Melt Extrusion Printing process for specialised composite bioscaffold fabrication, IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), pp.973-978, 2013.

M. B. Kechiche, F. Khoffi, O. Harzallah, and J. Y. Drean, Mechanical characterization of composite Polyethylene Terephtalate / Copper filaments, Fiber Society Conference. 2012: Saint Gall

M. B. Kechiche, F. Khoffi, O. Harzallah, and J. Y. Drean, The development and characterization of conductive composite filaments, AUTEX International Conference, 2011.

A. Lund and B. Hagström, Melt spinning of poly(vinylidene fluoride) fibers and the influence of spinning parameters on ?-phase crystallinity, Journal of Applied Polymer Science, vol.116, issue.5, pp.2685-2693, 2010.

P. C. Patel, D. A. Vasavada, and H. R. Mankodi, Applications of electrically conductive yarns in technical textiles, IEEE International Conference on Power System Technology (POWERCON), pp.1-6, 2012.

C. M. Hansen, The Universality of the Solubility Parameter. Industrial & Engineering Chemistry Product Research and Development, vol.8, pp.2-11, 1969.

J. S. Harrison, Z. ;. Ounaies, and H. F. Mark, Piezoelectric Polymers, Encyclopedia of Polymer Science and Technology, 2002.

A. Afzal, J. Y. Drean, N. Khenoussi, S. Ahmad, and N. A. Akhtar, Evaluation of dimensional stability in cutting of coaxial composite filaments, 16th AUTEX World Textile Conference, 2016.

M. Walter, Monoextrusion Dies for Thermoplastics, Extrusion Dies for Plastics and Rubber, M. Walter, pp.141-235, 2003.

M. Walter, Coextrusion Dies for Thermoplastics, Extrusion Dies for Plastics and Rubber, M. Walter, pp.237-262, 2003.

W. E. Fitzgerald and J. P. Knudsen, Mixed-Stream Spinning of Bicomponent Fibers1, Textile Research Journal, vol.37, issue.6, pp.447-453, 1967.

I. Szarvasy, Automatic CAD Model Based Simulation of PVC Extrusion and Calibration, 2005.

J. F. Pittman, Computer-aided design and optimization of profile extrusion dies for thermoplastics and rubber: a review, Proceedings of the Institution of Mechanical Engineers, vol.225, pp.280-321, 2011.

J. Sienz, A. Goublomme, and M. Luege, Sensitivity analysis for the design of profile extrusion dies, Computers & Structures, vol.88, issue.9, pp.610-624, 2010.

C. C. Lee and J. F. Stevenson, The Face-relief Strategy for Design of Profile Dies. International Polymer Processing, vol.7, pp.186-189, 1992.

H. J. Ettinger, Development of optimization and parameter techniques applied to the extrusion die design optimization of PVC profile dies, 2005.

R. B. Bird, R. C. Armstrong, and O. Hassager, Dynamics of polymeric liquids, Fluid Mechanics, vol.1, 1987.

M. Gupta, Effect of elongational viscosity on axisymmetric entrance flow of polymers, Polymer Engineering & Science, vol.40, issue.1, pp.23-35, 2000.

M. Zatloukal, A simple phenomenological non-Newtonian fluid model, Journal of Non-Newtonian Fluid Mechanics, vol.165, pp.592-595, 2010.

G. Mahesh and S. Debabrata, An investigation of the effect of elongational viscosity on entrance flow, CAE and Related Innovations for Polymer Processing, vol.90, 2000.

M. M. Denn, Extension instabilities and wall slip, Annual Review of Fluid Mechanics, vol.33, issue.1, pp.265-287, 2001.

M. M. Denn, Polymer melt processing: foundations in fluid mechanics and heat transfer, 2008.

A. Y. Malkin, Flow instability in polymer solutions and melts, Polymer Science Series C, vol.48, issue.1, pp.21-37, 2006.

J. Agassant and J. A. Covas, An overiew of polymer processing modelling, Advances in Material Forming, F. Chinesta and E. Cueto, pp.37-59, 2007.

J. H. Southern and R. L. Ballman, Additional observations on stratified bicomponent flow of polymer melts in a tube, Journal of Polymer Science: Polymer Physics Edition, vol.13, issue.4, pp.863-869, 1975.

W. J. Schrenk, N. L. Bradley, T. Alfrey, and H. Maack, Interfacial flow instability in multilayer coextrusion, Polymer Engineering & Science, vol.18, issue.8, pp.620-623, 1978.

C. D. Han, G. Applications, G. Astarita, L. Marrucci, and . Nicolais, Multiphase Flow in Polymer Processing, Rheology, vol.3, pp.121-128, 1980.

J. K. Hermann, Polymer Melt Rheology and Flow Birefringence, 1983.

J. F. Pittman, C. L. Barone, and . Tucker, Finite elements for field problems, Fundamentals of Computer Modeling for Polymer Processing, pp.237-331, 1989.

M. A. Huneault, P. G. Lafleur, and P. J. Carreau, Extrudate swell and drawdown effects on extruded profile dimensions and shape, Polymer Engineering & Science, vol.30, issue.23, pp.1544-1550, 1990.

A. Zolfaghari, A. H. Behravesh, E. Shakouri, and E. Soury, An innovative method of die design and evaluation of flow balance for thermoplastics extrusion profiles, Polymer Engineering & Science, vol.49, issue.9, pp.1793-1799, 2009.

C. Miller, Predicting Non-Newtonian Flow Behavior in Ducts of Unusual Cross Section. Industrial & Engineering Chemistry Fundamentals, vol.11, pp.524-528, 1972.

M. Walter, Mechanical Design of Extrusion Dies, Extrusion Dies for Plastics and Rubber, M. Walter, pp.305-327, 2003.

B. Lepoittevin, P. Roger, P. M. Thomas, and . Visakh, Poly(ethylene terephthalate), in Handbook of Engineering and Speciality Thermoplastics, vol.3, pp.97-126, 2011.

A. Elamri, A. Lallam, O. Harzallah, and L. Bencheikh, Mechanical characterization of melt spun fibers from recycled and virgin PET blends, Journal of Materials Science, vol.42, pp.8271-8278, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00258777

S. Garg, C. Hurren, and A. Kaynak, Improvement of adhesion of conductive polypyrrole coating on wool and polyester fabrics using atmospheric plasma treatment. Synthetic Metals, vol.157, pp.41-47, 2007.

L. A. Donaldson, J. W. Eichhorn, M. Hearle, T. Jaffe, and . Kikutani, Analysis of fibres using microscopy, in Handbook of Textile Fibre Structure, vol.1, pp.121-153, 2009.

M. Chanda and S. K. Roy, Industrial Polymers, Specialty Polymers, and Their Applications, 2008.

J. F. Legrand, Structure and ferroelectric properties of P(VDF-TrFE) copolymers, Ferroelectrics, vol.91, issue.1, pp.303-317, 1989.

H. Kawai, The Piezoelectricity of Poly (vinylidene Fluoride), Japanese Journal of Applied Physics, vol.8, pp.975-976, 1969.

T. T. Wang, Piezoelectricity in ?-phase poly(vinylidene fluoride) having a ''single-crystal'' orientation, Journal of Applied Physics, vol.50, issue.10, pp.6091-6094, 1979.

, ASTM, Practice for Conditioning Plastics for Testing. 2013. ASTM D618-13

, ASTM, Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer. 2013. ASTM D1238-13

P. G. Karagiannidis, A. C. Stergiou, and G. P. Karayannidis, Study of crystallinity and thermomechanical analysis of annealed poly(ethylene terephthalate) films, European Polymer Journal, vol.44, issue.5, pp.1475-1486, 2008.

H. W. Starkweather, P. Zoller, and G. A. Jones, The heat of fusion of poly(ethylene terephthalate), Journal of Polymer Science: Polymer Physics Edition, vol.21, issue.2, pp.295-299, 1983.

A. Afzal, J. Y. Drean, N. Khenoussi, S. Ahmad, and N. A. Akhtar, Development of composite filament by conventional melt extruder, Fiber Society Spring Conference, 2016.

A. Afzal, N. Khenoussi, S. Ahmad, J. Y. Drean, and N. A. Akhtar, Development of Composite Technical Filament for Smart Applications, The 13th Asian Textile Conference, pp.172-175, 2015.

A. Afzal, J. Y. Drean, N. Khenoussi, S. Ahmad, and N. A. Akhtar, Influence of spinning parameter on the development of composite polymeric technical filaments, 15th AUTEX World Textile Conference, 2015.

U. Göschel, Thermally stimulated structural changes in highly oriented glassy poly(ethylene terephthalate), vol.37, pp.4049-4059, 1996.

S. Astm, Test Method for Yarn Number Based on Short-Length Specimens, 2001.

M. D. Abràmoff, P. J. Magalhães, and S. J. Ram, Image processing with, ImageJ. Biophotonics international, vol.11, issue.7, pp.36-42, 2004.

S. Astm, Test Method for Tensile Properties of Yarns by the Single-Strand Method, ASTM D2256 / D2256M-10, 2015.

F. Debbabi and S. B. Abdessalem, Effect of manufacturing conditions on structural and handling properties of braided polyamide suture, Journal of Engineered Fibers and Fabrics, vol.10, issue.3, pp.1-8, 2015.

N. Sejri, O. Harzallah, P. Viallier, and S. Ben-nasrallah, Influence of wetting phenomenon on the characteristics of a sized yarn, Textile Research Journal, vol.81, issue.3, pp.280-289, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00554313

A. Afzal, J. Drean, O. Harzallah, N. Khenoussi, S. Ahmad et al., Development of multifunctional different cross-sectional shaped coaxial composite filaments for SMART textile applications, Textile Research Journal, 2016.

U. Göschel, Herstellung von Poly(ethylenterephthalat)-Folienbändchen mit höherer Steifigkeit und Festigkeit durch Orientierungsreckung. Acta Polymerica, vol.40, pp.23-31, 1989.

D. Hofmann, U. Göschel, E. Walenta, D. Geiß, and B. Philipp, Investigations on supermolecular structure of poly(ethylene terephthalate) samples of higher modulus, Polymer, vol.30, issue.2, pp.242-247, 1989.

T. Pakula and E. W. Fischer, Instabilities of the deformation process in cold drawing of poly(ethylene terephthalate) and other polymers, Journal of Polymer Science: Polymer Physics Edition, vol.19, issue.11, pp.1705-1726, 1981.

A. A. Klyosov, Wood-Plastic Composites, 2007.

M. Raposo, Q. Ferreira, and P. Ribeiro, A guide for atomic force microscopy analysis of soft-condensed matter. Modern research and educational topics in microscopy, vol.1, pp.758-769, 2007.

M. Research-&-consulting and L. , Global PET Supply to Exceed 24.39 Mln Tonnes in 2015, Fiber Organon, 2014.

S. Thomas and P. M. Visakh, Engineering and Specialty Thermoplastics: Polyethers and Polyesters: State-of-the-art, Handbook of Engineering and Speciality Thermoplastics, S. Thomas and P. M. Visakh, vol.3, pp.1-14, 2011.

A. J. East, J. W. Eichhorn, M. Hearle, T. Jaffe, and . Kikutani, The structure of polyester fibers, in Handbook of Textile Fibre Structure, vol.1, pp.181-231, 2009.

G. T. Davis and . Wong, Piezoelectric and pyroelectric polymers, in Polymers for electronic and photonic applications, p.435, 1993.

T. S. Kikutani, J. W. Eichhorn, M. Hearle, T. Jaffe, and . Kikutani, Structure development in synthetic fiber production, in Handbook of Textile Fibre Structure, vol.1, pp.157-180, 2009.

M. Chanda and S. K. Roy, Industrial polymers, speciality polymers and their applications, 2008.