K. Appendix, Résumé en français:Étude des caloducs cryogéniques pulsés diphasiques d'un mètre de longueur 188

. Bibliography,

, CryoComp Rapid Cryogenic Design. 88 Materials in the Properties Database. Thermal Analysis Software

, NIST Reference Fluid Thermodynamic and Transport Properties Database (REF-PROP): Version 9, vol.1

, Un bouclier magnétique pour les futurs vols spatiaux: le projet SR2S, 2015.

, Community Research and Development Information Service (CORDIS) -European Commission. Space Radiation Superconductive Shield

S. Khandekar, Thermo-Hydrodynamics of Closed Loop Pulsating Heat Pipes, 2004.

S. Okazaki, H. Fuke, H. Ogawa, and Y. Miyazaki, Development of Meter-Scale O-Shaped and U-shaped Oscillating Heat Pipes for GAPS, IEEE Aerospace Conference, 2014.

J. Zhao, Z. Rao, C. Liu, and Y. Li, Experiment Study of Oscillating Heat Pipe and Phase Change Materials Coupled for Thermal Energy Storage and Thermal Management, International Journal of Heat and Mass Transfer, vol.99, pp.252-260, 2016.

J. Zhao, J. Qu, and Z. Rao, Experiment investigation on thermal performance of a large-scale oscillating heat pipe with self-rewetting fluid used for thermal energy storage, International Journal of Heat and Mass Transfer, vol.111, p.999, 2017.

T. Mito, K. Natsume, N. Yanagi, H. Tamura, T. Tamada et al., Development of Highly Effective Cooling Technology for a Superconducting Magnet Using Cryogenic OHP, IEEE Transactions on Applied Superconductivity, vol.20, issue.3, pp.2023-2026, 2010.

T. Mito, K. Natsume, N. Yanagi, H. Tamura, T. Tamada et al., Achievement of High Heat Removal Characteristics of Superconducting Magnets With Imbedded Oscillating Heat Pipes, IEEE Transactions on Applied Superconductivity, vol.21, issue.2, pp.2470-2473, 2011.

K. Natsume, T. Mito, N. Yanagi, H. Tamura, T. Tamada et al., Development of cryogenic oscillating heat pipe as a new device for indirect/conduction cooled superconducting magnets, IEEE Transactions on Applied Superconductivity, vol.22, issue.3, pp.4703904-4703904, 2012.

T. Mito, K. Natsume, N. Yanagi, H. Tamura, and Y. Terazaki, Enhancement of thermal properties of hts magnets using built-in cryogenic oscillating heat pipes, IEEE Transactions on Applied Superconductivity, vol.23, issue.3, pp.4602905-4602905, 2013.

L. D. Fonseca, J. Pfotenhauer, and F. Miller, Results of a three evaporator cryogenic helium Pulsating Heat Pipe, International Journal of Heat and Mass Transfer, vol.120, pp.1275-1286, 2018.

M. Mameli, L. Araneo, S. Filippeschi, L. Marelli, R. Testa et al., Thermal Response of a Closed Loop Pulsating Heat Pipe Under a Varying Gravity Force, International Journal of Thermal Sciences, vol.80, pp.11-22, 2014.

. Mb-shafii, Y. W. Faghri, and . Zhang, Thermal modeling of unlooped and looped pulsating heat pipes, Journal of Heat Transfer -Transactions of the Asme, vol.123, issue.6, pp.1159-1172, 2001.

Y. W. Zhang and . Faghri, Oscillatory flow in pulsating heat pipes with arbitrary numbers of turns, Journal of Thermophysics and Heat Transfer, vol.17, issue.3, pp.340-347, 2003.

M. Mameli, M. Marengo, and S. Zinna, Numerical model of a multi-turn Closed Loop Pulsating Heat Pipe: Effects of the local pressure losses due to meanderings, International Journal of Heat and Mass Transfer, vol.55, issue.4, pp.1036-1047, 2012.

I. Nekrashevych, S. Vadim, and . Nikolayev, Effect of tube heat conduction on the pulsating heat pipe start-up, Applied Thermal Engineering, vol.117, pp.24-29, 2017.
URL : https://hal.archives-ouvertes.fr/cea-01760895

S. P. Das, V. S. Nikolayev, F. Lefevre, B. Pottier, S. Khandekar et al., Thermally induced two-phase oscillating flow inside a capillary tube, International Journal of Heat and Mass Transfer, vol.53, pp.3905-3913, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00732168

I. Nekrashevych and V. Nikolayev, Pulsating heat pipe simulations: Impact of php orientation. Microgravity Science and Technology, vol.2, p.2019
URL : https://hal.archives-ouvertes.fr/hal-02045185

R. F. Barron, Cryogenic Systems. McGraw-Hill series in mechanical engineering, 1966.

M. Tinkham, Introduction to Superconductivity: Second Edition, 2004.

B. Baudouy, Heat transfer and cooling techniques at low temperature, 2013.

H. Godfrin and C. Gianèse, Crise de l'hélium: l'inquiétude persiste. Reflets de la physique, vol.39, pp.19-21, 2014.

Y. Zhang and A. Faghri, Advances and Unsolved Issues in Pulsating Heat Pipes, Heat Transfer Engineering, vol.29, issue.1, pp.20-44, 2008.

S. Rittidech, N. Pipatpaiboon, and S. Thongdaeng, Thermal Performance of Horizontal Closed-Loop Oscillating Heat-Pipe with Check Valves, Journal of Mechanical Science and Technology, vol.24, issue.2, pp.545-550, 2010.

K. Gi, F. Sato, and S. Maezawa, Flow Visualization Experiment on Oscillating Heat Pipe, pp.373-377, 1999.

M. Hosoda, R. Nishio, and . Shirakashi, Study of meandering closed-loop heattransport device (vapor-plug propagation phenomena), International Journal Series B-Fluids and Thermal Engineering, vol.42, pp.737-744, 1999.

S. Khandekar, P. K. Pnigrahi, F. Lefevre, and J. Bonjour, Local hydrodynamics of flow in a pulsating heat pipe: a review, Frontiers in Heat Pipes, vol.1, issue.2, pp.1-20, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00555080

R. Bruce, M. Barba, A. Bonelli, and B. Baudouy, Thermal performance of a meter-scale horizontal nitrogen pulsating heat pipe, Cryogenics, vol.93, pp.66-74, 2018.

V. Nikolayev and I. Nekrashevych, Vapor thermodynamics and fluid merit for pulsating heat pipe. Preprint submitted to Applied Thermal Engineering, 2019.

S. Khandekar, A. P. Gautam, and P. K. Sharma, Multiple quasisteady states in a closed loop pulsating heat pipe, International Journal of Thermal Sciences, vol.48, issue.3, pp.535-546, 2009.

M. Groll and . Khandekar, Pulsating heat pipes: Progress and prospects, Energy and Environment, pp.723-730, 2003.

M. Rao, F. Lefevre, P. Czujko, S. Khandekar, and J. Bonjour, Numerical and experimental investigations of thermally induced oscillating flow inside a capillary tube, International Journal of Thermal Science, vol.115, pp.29-42, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01482169

A. Yoon and S. J. Kim, Experimental and theoretical studies on oscillation frequencies of liquid slugs in micro pulsating heat pipes. Energy Conversion and Management, vol.181, pp.48-58, 2019.

H. Akachi, Structure of a heat pipe, p.41, 1990.

H. Akachi, Structure of micro-heat pipe, US Patent, vol.5, p.20, 1993.

L. D. Fonseca, F. Miller, and J. Pfotenhauer, A Helium Based Pulsating Heat Pipe For Superconducting Magnets, Advances in Cryogenic Engineering, vol.1573, pp.28-35, 2014.

M. Barba, R. Bruce, A. Bonelli, and B. Baudouy, Experimental study of Large-scale cryogenic Pulsating Heat Pipe, IOP Conf. Ser.: Mater. Sci. Eng, vol.278, p.12156, 2017.

X. Han, H. Ma, A. Jiao, and J. K. Critser, Investigations on the Heat Transport Capability of a Cryogenic Oscillating Heat Pipe and its Application in

, Achieving Ultra-Fast Cooling Rates for Cell Vitrification Cryopreservation, Cryobiology, vol.56, issue.3, pp.195-203, 2008.

K. Natsume, T. Mito, N. Yanagi, H. Tamura, T. Tamada et al., Heat Transfer Performance of Cryogenic Oscillating Heat Pipes for Effective Cooling of Superconducting Magnets, Cryogenics, issue.6, pp.309-314, 2011.

D. Luis and . Fonseca, Experimental Characterization of Cryogenic Helium Pulsating Heat Pipes, 2017.

D. Xu, L. Li, and H. Liu, Experimental Investigation on the Thermal Performance of Helium Based Cryogenic Pulsating Heat Pipe, Experimental Thermal and Fluid Science, vol.70, pp.61-68, 2016.

Y. Li, Q. Wang, S. Chen, B. Zhao, and Y. Dai, Experimental Investigation of the Characteristics of Cryogenic Oscillating Heat Pipe, International Journal of Heat and Mass Transfer, vol.79, pp.713-719, 2014.

Q. Liang, Y. Li, and Q. Wang, Experimental investigation on the performance of a neon cryogenic oscillating heat pipe, Cryogenics, vol.84, pp.7-12, 2017.

Q. Liang, Y. Li, and Q. Wang, Cryogenic Oscillating Heat Pipe for Conduction-Cooled Superconducting Magnets, IEEE Transactions on Applied Superconductivity, vol.28, 2018.

Q. Liang, Y. Li, and Q. Wang, Effects of filling ratio and condenser temperature on the thermal performance of a neon cryogenic oscillating heat pipe, Cryogenics, vol.89, pp.102-106, 2018.

Q. Liang, Y. Li, and Q. Wang, Study on a neon cryogenic oscillating heat pipe with long heat transport distance, vol.54, pp.1721-1727, 2018.

A. J. Jiao, H. B. Ma, and J. K. Critser, Experimental Investigation of Cryogenic Oscillating Heat Pipes, International Journal of Heat and Mass Transfer, vol.52, pp.3504-3509, 2009.

L. D. Fonseca, F. Miller, and J. Pfotenhauer, Experimental heat transfer analysis of a cryogenic nitrogen pulsating heat Pipe at various liquid fill ratios, Applied Thermal Engineering, vol.130, pp.343-353, 2018.

X. Sun, S. Li, B. Jiao, Z. Gan, and J. Pfotenhauer, Experimental study on a hydrogen closed-loop pulsating heat pipe with two turns, Cryogenics, vol.97, pp.63-69, 2019.

P. Gully, F. Bonnet, V. Nikolayev, T. Luchier, and . Tran, Evaluation of the Vapor Thermodynamic State in PHP, Heat Pipe Science and Technology, vol.5, pp.369-376, 2013.
URL : https://hal.archives-ouvertes.fr/hal-02281390

F. Bonnet, P. Gully, and V. Nikolayev, Development and Test of a Cryogenic Pulsating Heat Pipe and a Pre-Cooling System, Advances in Cryogenic Engineering, vol.1434, pp.607-614, 2012.

H. R. Deng, Y. M. Liu, R. F. Ma, D. Y. Han, Z. H. Gan et al., Experimental Investigation on a Pulsating Heat Pipe with Hydrogen, Advances in Cryogenic Engineering, vol.101, 2015.

X. Sun, J. Pfotenhauer, B. Jiao, L. D. Fonseca, D. Han et al., Investigation on the temperature dependence of filling ratio in cryogenic pulsating heat pipes, International Journal of Heat and Mass Transfer, vol.126, pp.237-244, 2018.

. Jj-gu, R. Kawaji, and . Futamata, Effects of Gravity on the Performance of Pulsating Heat Pipes, Journal of Thermophysics and Heat Transfer, vol.18, issue.3, pp.370-378, 2004.

J. Gu, M. Kawaji, and R. Futamata, Microgravity Performance of Micro Pulsating Heat Pipes, Microgravity Science and Technology, vol.16, pp.181-185, 2005.

K. Vieira-de-pavia and M. B. Mantelli, Raul Gohr, and Marcelo de Assis Corrêa. Wire Mini Heat Pipe under Microgravity Conditions. 14th International Heat Pipe Conference, 2007.

M. Mameli, M. Marengo, and S. Zinna, Numerical Investigation of the Effects of Orientation and Gravity in a Closed Loop Pulsating Heat Pipe, Science and Technology, vol.24, pp.79-92, 2012.

M. Manzoni, M. Mameli, C. De-falco, L. Araneo, S. Filippeschi et al., Advanced numerical method for a thermally induced slug flow: application to a capillary closed loop pulsating heat pipe, International Journal for Numerical Methods in Fluids, vol.82, pp.375-397, 2016.

D. Mangini, M. Mameli, A. Georgoulas, L. Araneo, S. Filippeschi et al., A Pulsating Heat Pipe for Space Applications: Ground and Microgravity Experiments, International Journal of Thermal Sciences, vol.95, pp.53-63, 2015.

D. Mangini, M. Mameli, D. Fioriti, S. Filippeschi, L. Araneo et al., Hybrid Pulsating Heat Pipe for space applications with non-uniform heating patterns: Ground and microgravity experiments, Applied Thermal Engineering, vol.126, pp.1029-1043, 2017.

M. Mameli, A. Catarsi, D. Mangini, and L. Pietrasanta, Davide Fioriti

D. Marco and S. Filippeschi, Large Diameter Pulsating Heat Pipe for Future Experiments on the International Space Station: Ground and Microgravity Thermal Response, 19th International Heat Pipe Conference and 13th International Heat Pipe Symposium, 2018.

Q. Sun, J. Qu, Q. Wang, and J. Yuan, Operational characteristics of oscillating heat pipes under micro-gravity condition, International Communications in Heat and Mass Transfer, vol.88, pp.28-36, 2017.

C. V-ayel, Y. Romestant, V. Bertin, S. Manno, and . Filippeschi, Visualisation of flow patterns in flat plate pulsating heat pipe: influence of hydraulic behaviour on thermal performances, 17th International Heat Pipe Conference, 2013.

V. Ayel, L. Araneo, A. Scalambra, M. Mameli, C. Romestant et al., Experimental study of a closed loop flat plate pulsating heat pipe under a varying gravity force, International Journal of Thermal Sciences, vol.96, pp.23-34, 2015.

H. Akachi, F. Polasek, and P. Stulc, Experimental heat transfer analysis of a cryogenic nitrogen pulsating heat Pipe at various liquid fill ratios, Proceedings of the 5th International Heat Pipe Symposium, 1996.

L. Lin, R. Ponnappan, and J. Leland, Experimental Investigation of Oscillating Heat Pipes, Journal of Thermophysics and Heat Transfer, vol.15, pp.395-400, 2001.

Q. Cai and C. Chen, Operating characteristic investigations in pulsating heat pipe, Journal of Heat Transfer -Transactions of the Asme, vol.128, pp.1329-1334, 2006.

P. Charoensawan, M. Khandekar, P. Groll, and . Terdtoon, Closed Loop Pulsating Heat Pipes -Part A: Parametric Experimental Investigations, Applied Thermal Engineering, vol.23, issue.16, 2003.

P. Charoensawan and P. Terdtoon, Thermal Performance of Horizontal Closed-Loop Oscillating Heat Pipes, Applied Thermal Engineering, vol.28, issue.5-6, pp.460-466, 2008.

H. Han, X. Cui, Y. Zhu, and S. Sun, A comparative study of the behavior of working fluids and their properties on the performance of pulsating heat pipes (PHP), Internal Journal of Thermal Sciences, vol.82, pp.138-147, 2014.

. Xm-zhang, Z. Q. Xu, and . Zhou, Experimental study of a pulsating heat pipe using FC-72, ethanol, and water as working fluids, Experimental Heat Transfer, vol.17, issue.1, pp.47-67, 2004.

Y. W. Zhang and . Faghri, Heat transfer in a pulsating heat pipe with open end, International Journal of Heat and Mass Transfer, vol.45, issue.4, pp.755-764, 2002.

N. Kammuang-lue, P. Sakulchangsatjatai, and P. Terdtoon, Effect of Working Fluids and Internal Diameters on Thermal Performance of Vertical and Horizontal Closed-Loop Pulsating Heat Pipes with Multiple Heat Sources, Thermal Science, vol.20, issue.1, pp.77-87, 2016.

X. Han, X. Wang, H. Zheng, X. Xu, and G. Chen, Review of the Development of Pulsating Heat Pipe for Heat Dissipation, Renewable and Sustainable Energy Reviews, vol.59, pp.692-709, 2016.

R. Bertossi, V. Ayel, B. Mehta, C. Romestant, Y. Bertin et al., Motion of liquid plugs between vapor bubbles in capillary tubes: a comparison between fluids, vol.53, pp.3315-3327, 2017.

. By-tong, K. T. Wong, and . Ooi, Closed-loop pulsating heat pipe, Applied Thermal Engineering, vol.21, pp.1845-1862, 2001.

H. S. Wook-hyun-lee, J. Jung, J. S. Kim, and . Kim, Flow Visualization of Oscillating Capillary Tube Heat Pipe, pp.355-360, 1999.

S. Cai, R. Chen, and C. Chen, An Investigation of Evaporation, Boiling, and Heat Transport Performance in Pulstating Heat Pipe, pp.99-104, 2002.

G. Spinato, N. Borhani, and J. R. Thome, Operational Regimes in a Closed Loop Pulsating Heat Pipe, International Journal of Thermal Sciences, vol.102, pp.78-88, 2016.

Z. Hu-xue and W. Qu, Experimental and theoretical research on a ammonia pulsating heat pipe: New full visualization of flow pattern and operating mechanism study, International Journal of Heat and Mass Transfer, vol.106, pp.149-166, 2017.

A. Ilinca, M. Mangini, . Mameli, . Fioriti, . Filippeschi et al., Fluid-flow pressure measurements and thermo-fluid characterization of a single loop two-phase passive heat transfer device, Journal of Physics: Conference Series, vol.923, pp.12-022, 2017.

X. Cui, Y. Zhu, Z. Li, and S. Shun, Combination study of operation characteristics and heat transfer mechanism for pulsating heat pipe, Applied Thermal Engineering, vol.65, issue.1-2, pp.394-402, 2014.

M. Mameli, M. Marengo, and S. Khandekar, Local heat transfer measurement and thermo-fluid characterization of a pulsating heat pipe, International Journal of Thermal Sciences, vol.75, pp.140-152, 2014.

S. M. Pouryoussefi and Y. Zhang, Analysis of chaotic flow in a 2D multi-turn closed-loop pulsating heat pipe, Applied Thermal Engineering, vol.126, pp.1069-1076, 2017.

M. Manzoni, M. Mameli, C. De-falco, L. Araneo, S. Filippeschi et al., Non equilibrium lumped parameter model for Pulsating Heat Pipes: validation in normal and hyper-gravity conditions, International Journal of Heat and Mass Transfer, vol.97, pp.473-485, 2016.

D. Soo-jang, H. J. Chung, Y. Jeon, and Y. Kim, Thermal performance characteristics of a pulsating heat pipe at various nonuniform heating conditions, International Journal of Heat and Mass Transfer, vol.126, issue.B, pp.855-863, 2018.

J. L. Xu and X. M. Zhang, Start-up and steady thermal oscillation of a pulsating heat pipe, Heat and Mass Transfer, vol.41, issue.8, pp.685-694, 2005.

S. M. Pouryoussefi and Y. Zhang, Nonlinear Analysis of Chaotic Flow in a Three-Dimensional Closed-Loop Pulsating Heat Pipe, Journal of Heat Transfer -Transactions of the Asme, vol.138, issue.12, 2016.

M. Barba, R. Bruce, F. Bouchet, A. Bonelli, and B. Baudouy, Thermal Study of a one-meter long Neon Cryogenic Pulsating Heat Pipe, 2018.

R. Wunenburger, . Garrabos, D. Lecoutre-chabot, J. Beysens, and . Hegseth, Thermalization of a two-phase fluid in low gravity: Heat transferred from cold to hot, Physical Review Letters, vol.84, pp.4100-4103, 2000.

M. Mameli, V. Manno, S. Filippeschi, and M. Marengo, Thermal instability of a Closed Loop Pulsating Heat Pipe: Combined effect of orientation and filling ratio, Experimental Thermal and Fluid Science, vol.59, pp.222-229, 2014.

R. K. Sarangi and M. V. Rane, Experimental Investigations for Start Up and Maximum Heat Load of Closed Loop Pulsating Heat Pipe, Chemical, Civil and Mechanical Engineering Tracks of 3rd Nirma University International Conference on Engineering, vol.51, pp.683-687, 2012.

X. Wang, T. Han, L. Wang, X. Mao, and C. Yang, Experimental Study on Start-Up Characteristics of Pulsating Heat Pipe, Progress in Power and Electrical Engineering, pp.87-91, 2012.

X. Liu, Y. Chen, and M. Shi, Dynamic Performance Analysis on Start-Up of Closed-Loop Pulsating Heat Pipes (CLPHPs), International Journal of Thermal Sciences, vol.65, pp.224-233, 2013.

E. T. White and R. H. Beardmore, The Velocity of Rise of Single Cylindrical Air Bubbles through Liquids Contained in Vertical Tubes, Chemical Engineering Science, vol.17, issue.5, pp.351-361, 1962.

J. Qu, Q. Wang, and Q. Sun, Lower limit of internal diameter for oscillating heat pipes: A theoretical model, International Journal of Thermal Sciences, vol.110, pp.174-185, 2016.

L. Lv, J. Li, and G. Zhou, A robust pulsating heat pipe cooler for integrated high power LED chips, vol.53, pp.3305-3313, 2017.

S. Wang, J. Chen, Y. Hu, and W. Zhang, Effect of Evaporation Section and Condensation Section Length on Thermal Performance of Flat Plate Heat Pipe, Applied Thermal Engineering, pp.2367-2373, 2011.

C. Tseng, K. Yang, K. Chien, M. Jeng, and C. Wang, Investigation of the Performance of Pulsating Heat Pipe Subject to Uniform/Alternating Tube Diameters, Experimental Thermal and Fluid Science, vol.54, pp.85-92, 2014.

B. Holley and . Faghri, Analysis of pulsating heat pipe with capillary wick and varying channel diameter, International Journal of Heat and Mass Transfer, vol.48, issue.13, pp.2635-2651, 2005.

D. Yin, H. Wang, H. B. Ma, and Y. L. Ji, Operation limitation of an oscillating heat pipe, International Journal of Heat and Mass Transfer, vol.94, pp.366-372, 2016.

T. Daimaru, S. Yoshida, and H. Nagai, Study on thermal cycle in oscillating heat pipes by numerical analysis, Applied Thermal Engineering, vol.113, pp.1219-1227, 2017.

R. Senjaya and T. Inoue, Oscillating heat pipe simulation considering dryout phenomena, Heat and Mass Transfer, vol.50, issue.10, pp.1429-1441, 2014.

M. Rao, F. Lefevre, S. Khandekar, and J. Bonjour, Heat and mass transfer mechanisms of a self-sustained thermally driven oscillating liquidvapour meniscus, International Journal of Heat and Mass Transfer, vol.86, pp.519-530, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01482253

A. Jokar, A. A. Godarzi, M. Saber, and M. Shafii, Simulation and optimization of a pulsating heat pipe using artificial neural network and genetic algorithm, vol.52, pp.2437-2445, 2016.

P. Sakulchangsatjatai and N. Kammuang-lue, Kritsada On-Ai, and Pradit Terdtoon. Correlations to Predict Thermal Performance Affected by Working Fluid's Properties of Vertical and Horizontal Closed-Loop Pulsating Heat Pipe, Thermal Science, vol.20, issue.5, pp.1555-1564, 2016.

. S-rittidech, M. Terdtoon, P. Murakami, W. Kamonpet, and . Jompakdee, Correlation to predict heat transfer characteristics of a closed-end oscillating heat pipe at normal operating condition, Applied Thermal Engineering, vol.23, issue.4, pp.497-510, 2003.

T. Katpradit, P. Wongratanaphisan, P. Terdtoon, . Kamonpet, A. Polchai et al., Correlation to predict heat transfer characteristics of a closed end oscillating heat pipe at critical state, Applied Thermal Engineering, vol.25, pp.2138-2151, 2005.

P. Charoensawan and P. Terdtoon, Thermal performance correlation of horizontal closed-loop oscillating heat pipes, 9th Electronics Packaging Technology Conference, p.906, 2007.

S. Khandekar, M. Charoensawan, P. Groll, and . Terdtoon, Closed loop pulsating heat pipes -Part B: visualization and semi-empirical modeling, Applied Thermal Engineering, vol.23, issue.16, pp.2021-2033, 2003.

G. Gursel, A. J. Frijns, F. G. Homburg, and A. A. Van-steenhoven, A massspring-damper model of a pulsating heat pipe with a non-uniform and asymmetric filling, Applied Thermal Engineering, vol.91, pp.80-90, 2015.

G. Spinato, N. Borhani, and J. R. Thome, Understanding the selfsustained oscillating two-phase flow motion in a closed loop pulsating heat pipe, Energy, vol.90, issue.1, pp.889-899, 2015.

C. Dang, L. Jia, and Q. Lu, Investigation on Thermal Design of a Rack with the Pulsating Heat Pipe for Cooling CPUs, Applied Thermal Engineering, vol.110, pp.390-398, 2017.

J. Rong, X. H. Xu, R. Zhang, S. H. Wang, H. Xu et al., Experimental investigation of a solar collector integrated with a pulsating heat pipe and a compound parabolic concentrator, Energy Conversion and Management, vol.148, pp.68-77, 2017.

Z. Deng, Y. Zheng, X. Liu, B. Zhu, and Y. Chen, Experimental study on thermal performance of an anti-gravity pulsating heat pipe and its application on heat recovery utilization, Applied Thermal Engineering, vol.125, pp.1368-1378, 2017.

J. , G. Monroe, O. T. Ibrahim, S. M. Thompson, and N. Shamsaei, Energy harvesting via fluidic agitation of a magnet within an oscillating heat pipe, Applied Thermal Engineering, vol.129, pp.884-892, 2018.

M. H. Mohammad-alhuyi-nazari, R. Ahmadi, and . Ghasempour,

, A review on pulsating heat pipes: From solar to cryogenic applications, Applied Energy, vol.222, pp.475-484, 2018.

E. Kostrov, A. Bagdinov, E. Demikhov, T. Demikhov, V. Lysenko et al., Performance test of a G-M cooler in magnetic field, vol.67, pp.440-444, 2015.

E. Kostrov, E. Demikhov, A. Bagdinov, T. Demikhov, V. Lysenko et al., Magnetic Field Operation and Shielding of a G-M Cryocooler, IEEE Transactions on Applied Superconductivity, vol.26, 2016.

T. Morie, T. Shiraishi, and M. Xu, Experimental investigation of cooling capacity of 4K GM cryocoolers in magnetic fields, vol.67, pp.474-478, 2015.

. Gaspak, Thermophysical and transport properties for 33 fluids

L. D. Fonseca, F. Miller, and J. Pfotenhauer, Design and Operation of a Cryogenic Nitrogen Pulsating Heat Pipe, Advances in Cryogenic Engineering, vol.101, 2015.

M. Li, L. Li, and D. Xu, Effect of number of turns and configurations on the heat transfer performance of helium cryogenic pulsating heat pipe, Cryogenics, vol.96, pp.159-165, 2018.

R. Bruce, M. Barba, F. Bouchet, A. Bonelli, and B. Bau-bibliography,

, Transient thermal behavior of a neon Pulsating Heat Pipe (PHP), 2019.

, ANSYS Inc. ANSYS Fluent Theory Guide. ANSYS Inc, 2013.

R. Bruce, S. Pascali, C. Vendramini, and B. Baudouy, Implementation of the thermodynamic and phase transition equations of superfluid helium in CFD software, IOP Conference Series-Materials Science and Engineering, vol.101, 2015.

K. M. Wrobel, Modelling and Numerical Simulation of Flows with Evaporation and Condensation, 2006.

H. Erbin, Hydrodynamique-L3. Art Libre, 2011.

G. Pare, Cration et jection des gouttes de l'atomisation, 2015.

L. Fourgeaud, S. Vadim, E. Nikolayev, J. Ercolani, P. Duplat et al., In situ investigation of liquid films in pulsating heat pipe, Applied Thermal Engineering, vol.126, pp.1023-1028, 2017.
URL : https://hal.archives-ouvertes.fr/cea-01687377

M. M. Awad, An Overview of Heat Transfer Phenomena, 2012.