G. Thonier, C. Tostivint, and P. Bono, FranceAgriMer -ONRB : enjeux de la valorisation de la biomasse en matériaux biosourcés, 2015.

L. Duigou, A. Davies, P. Baley, and C. , Environmental Impact Analysis of the Production of Flax Fibres to be Used as Composite Material Reinforcement, J Biobased Mater Bioenergy, vol.5, pp.153-65, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00714977

D. Brosius, Natural Fiber Composites Slowly Take Root, Compos Technol, vol.12, pp.32-39, 2006.

P. Prevost and B. F. Le-lin-fibre,

, ARVALIS -Institut du végétal, 2014.

A. Mohanty, M. Misra, T. Drzal, S. Selke, B. Harte et al., Natural Fibers, Biopolymers, and Biocomposites, 2005.

G. Koronis, A. Silva, and M. Fontul, Green composites: A review of adequate materials for automotive applications, Compos Part B Eng, vol.44, pp.120-127, 2013.

C. Baley and A. Bourmaud, Average tensile properties of French elementary flax fibers, Mater Lett, vol.122, pp.159-61, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00988042

C. Baley, L. Duigou, A. Bourmaud, A. Davies, and P. , Influence of drying on the mechanical behaviour of flax fibres and their unidirectional composites, Compos Part A Appl Sci Manuf, vol.43, pp.1226-1259, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00717191

C. Baley, C. Morvan, and Y. Grohens, Influence of the Absorbed Water on the Tensile Strength of Flax Fibers, Macromol Symp, vol.222, pp.195-202, 2005.

G. Davies and D. M. Bruce, Effect of environmental relative humidity and damage on the tensile properties of flax and nettle fibers, Text Res J, vol.68, pp.623-632, 1998.

Y. Li and B. Xue, Hydrothermal ageing mechanisms of unidirectional flax fabric reinforced epoxy composites, Polym Degrad Stab, vol.126, pp.144-58, 2016.

H. Dhakal, Z. Zhang, and M. Richardson, Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites, Compos Références, p.136

, Sci Technol, vol.67, pp.1674-83, 2007.

H. Alamri and I. M. Low, Mechanical properties and water absorption behaviour of recycled cellulose fibre reinforced epoxy composites, Polym Test, vol.31, pp.620-628, 2012.

E. Muñoz and J. A. García-manrique, Water Absorption Behaviour and Its Effect on the Mechanical Properties of Flax Fibre Reinforced Bioepoxy Composites, Int J Polym Sci, vol.2015, pp.1-10, 2015.

M. Assarar, D. Scida, E. Mahi, A. Poilâne, C. Ayad et al., Influence of water ageing on mechanical properties and damage events of two reinforced composite materials: Flax-fibres and glass-fibres, Mater Des, vol.32, pp.788-95, 2011.

L. Duigou, A. Bourmaud, A. Baley, and C. , In-situ evaluation of flax fibre degradation during water ageing, Ind Crops Prod, vol.70, pp.204-214, 2015.

Z. N. Azwa, B. F. Yousif, A. C. Manalo, and W. Karunasena, A review on the degradability of polymeric composites based on natural fibres, Mater Des, vol.47, pp.424-466, 2013.

R. H. Newman, Auto-accelerative water damage in an epoxy composite reinforced with plain-weave flax fabric, Compos Part A Appl Sci Manuf, vol.40, pp.1615-1635, 2009.

D. Mathijsen, The renaissance of flax fibers, Reinf Plast, 2017.

A. Bledzki and J. Gassan, Composites reinforced with cellulose based fibres, Prog Polym Sci, vol.24, pp.221-74, 1999.

T. Museum, Popular Research Topics : Soybean Car n

B. Suddel and W. Evans, Natural fiber composites in automotive applications, Nat. Fibers, Biopolym. Biocomposites, 2005.

, Faurecia Flaxpreg wins JEC Europe 2015 Innovation Award, vol.59, p.110, 2015.

K. Charlet, Contribution à l'étude de composites unidirectionnels renforcés par des fibres de lin : relation entre la microstructure de la fibre et ses propriétés Références -137 -mécaniques, 2008.

C. Baley, Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase, Compos Part A Appl Sci Manuf, vol.33, pp.939-987, 2002.

H. L. Bos, M. Van-den-oever, and O. Peters, Tensile and compressive properties of flax fibres for natural fibre reinforced composites, J Mater Sci, vol.37, pp.1683-92, 2002.

J. Müssig and K. Haag, The use of flax fibres as reinforcements in composites, Biofiber Reinf. Compos. Mater, pp.35-85, 2015.

K. Charlet, J. P. Jernot, M. Gomina, J. Bréard, C. Morvan et al., Influence of an Agatha flax fibre location in a stem on its mechanical, chemical and morphological properties, Compos Sci Technol, vol.69, pp.1399-403, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00404015

K. Charlet, J. P. Jernot, S. Eve, M. Gomina, and J. Bréard, Multi-scale morphological characterisation of flax: From the stem to the fibrils, Carbohydr Polym, vol.82, pp.54-61, 2010.

K. Charlet, C. Baley, C. Morvan, J. P. Jernot, M. Gomina et al., Characteristics of Hermès flax fibres as a function of their location in the stem and properties of the derived unidirectional composites, Compos Part A Appl Sci Manuf, vol.38, pp.1912-1933, 2007.

J. Hearle, The fine structure of fibers and crystalline polymers. III. Interpretation of the mechanical properties of fibers, J Appl Polym Sci, vol.7, pp.1207-1230, 1963.

A. Lefeuvre, A. Bourmaud, C. Morvan, and C. Baley, Elementary flax fibre tensile properties: Correlation between stress-strain behaviour and fibre composition, Ind Crops Prod, vol.52, pp.762-771, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00988036

K. Charlet, J. Jernot, J. Breard, and M. Gomina, Scattering of morphological and mechanical properties of flax fibres, Ind Crops Prod, vol.32, pp.220-224, 2010.

C. Morvan, C. Andème-onzighi, R. Girault, D. S. Himmelsbach, A. Driouich et al., Building flax fibres: more than one brick in the walls, Plant Physiol Biochem, vol.41, pp.935-979, 2003.

M. J. John and S. Thomas, Biofibres and biocomposites, Carbohydr Polym Références -138, vol.71, pp.343-64, 2008.

A. Lefeuvre, A. Duigou, . Le, A. Bourmaud, A. Kervoelen et al., Analysis of the role of the main constitutive polysaccharides in the flax fibre mechanical behaviour, Ind Crops Prod, vol.76, pp.1039-1087, 2015.

C. Baley, Fibres naturelles de renfort pour matériaux composites, AM, vol.5, pp.1-17, 2013.

A. Thuault, B. Domengès, I. Hervas, and M. Gomina, Investigation of the internal structure of flax fibre cell walls by transmission electron microscopy, Cellulose, vol.22, pp.3521-3551, 2015.
URL : https://hal.archives-ouvertes.fr/hal-02184130

S. Batra, Other Long Vegetable Fibers, Handb. fiber Chem, pp.505-75, 2006.

A. Bismarck, I. Aranberri-askargorta, J. Springer, T. Lampke, B. Wielage et al., Surface characterization of flax, hemp and cellulose fibers

, Surface properties and the water uptake behavior, Polym Compos, vol.23, pp.872-94, 2002.

I. Lapierre and P. Belmont, Bilan écologique du lin, de la graine au tissu ; Mémoire de fin d'étude de l'Ecole Nationale Supérieure des Arts et Industries Textiles de Roubaix, 1994.

O. Faruk, A. K. Bledzki, H. Fink, and M. Sain, Biocomposites reinforced with natural fibers, Prog Polym Sci, vol.37, pp.1552-96, 2000.

H. Khalil, H. D. Rozman, M. N. Ahmad, and H. Ismail, Acetylated plant-fiberreinforced polyester composites: A study of mechanical, hygrothermal, and aging characteristics, Polym Plast Technol Eng, vol.39, pp.757-81, 2000.

K. Nakamura, T. Hatakeyama, and H. Hatakeyama, Studies on Bound Water of Cellulose by Differential Scanning Calorimetry, Text Res J, vol.51, pp.607-620, 1981.

H. Lennholm, T. Larsson, and T. Iversen, Determination of cellulose I? and I? in lignocellulosic materials, Carbohydr Res, vol.261, issue.94, pp.80011-80012, 1994.

H. Fink, E. Walenta, and J. Kunze, The structure of natural cellulosic fibres -Part 2. The supermolecular structure of bast fibres a,d their changes by mercerization as Références -139 -revealed by X-ray diffraction and C-13-NMR-spectroscopy, PAPIER, vol.53, pp.534-576, 1999.

I. Sakurada, Y. Nukushina, and T. Ito, Experimental determination of the elastic modulus of crystalline regions in oriented polymers, J Polym Sci, vol.57, pp.651-60, 1962.

H. Yang, R. Yan, H. Chen, D. H. Lee, and C. Zheng, Characteristics of hemicellulose, cellulose and lignin pyrolysis, Fuel, vol.86, pp.1781-1789, 2007.

W. J. Cousins, Young's modulus of hemicellulose as related to moisture content, Wood Sci Technol, vol.12, pp.161-168, 1978.

T. A. Gorshkova, V. V. Salnikov, N. M. Pogodina, S. B. Chemikosova, E. V. Yablokova et al., Composition and Distribution of Cell Wall Phenolic Compounds in Flax (Linum usitatissimum L.) Stem Tissues, Ann Bot, vol.85, pp.477-86, 2000.

K. Hodgson and J. Berg, Dynamic Wettability Properties of Single Wood Pulp Fibers and Their Relationship to Absorbency, Wood Fiber Sci, vol.20, pp.3-17, 1988.

C. Pouteau, P. Dole, B. Cathala, L. Averous, and N. Boquillon, Antioxidant properties of lignin in polypropylene, Polym Degrad Stab, vol.81, pp.57-57, 2003.

T. Dizhbite, G. Telysheva, V. Jurkjane, and U. Viesturs, Characterization of the radical scavenging activity of lignins -Natural antioxidants, Bioresour Technol, vol.95, pp.309-326, 2004.

K. Van-de-velde and E. Baetens, Thermal and Mechanical Properties of Flax Fibres as Potential Composite Reinforcement, Macromol Mater Eng, vol.286, pp.342-351, 2001.

A. Bourmaud and C. Baley, Effects of thermo mechanical processing on the mechanical properties of biocomposite flax fibers evaluated by nanoindentation, Polym Degrad Stab, vol.95, pp.1488-94, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00717233

A. Stamboulis, C. A. Baillie, and T. Peijs, Effects of environmental conditions on mechanical and physical properties of flax fibers, Compos Part A Appl Sci Manuf, vol.32, pp.1105-1120, 2001.

Y. Athukorala, G. Mazza, and B. D. Oomah, Extraction, purification and characterization of wax from flax (Linum usitatissimum) straw, Eur J Lipid Sci Références -140 -Technol, vol.111, pp.705-719, 2009.

H. L. Bos, The potential of flax fibres as reinforcement for composite materials, 2004.

A. Bourmaud, C. Morvan, A. Bouali, V. Placet, P. Perré et al., Relationships between micro-fibrillar angle, mechanical properties and biochemical composition of flax fibers, Ind Crops Prod, vol.44, pp.343-51, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00993433

D. H. Page, F. El-hosseiny, and K. Winkller, Behaviour of Single Wood Fibres under Axial Tensile Strain, Nature, vol.229, pp.252-255, 1971.

T. Nilsson and P. J. Gustafsson, Influence of dislocations and plasticity on the tensile behaviour of flax and hemp fibres, Compos Part A Appl Sci Manuf, vol.38, pp.1722-1730, 2007.

F. Roussière, C. Baley, G. Godard, and D. Burr, Compressive and Tensile Behaviours of PLLA Matrix Composites Reinforced with Randomly Dispersed Flax Fibres

, Appl Compos Mater, vol.19, pp.171-88, 2012.

A. Bourmaud, C. Morvan, and C. Baley, Importance of fiber preparation to optimize the surface and mechanical properties of unitary flax fiber, Ind Crops Prod, vol.32, pp.662-669, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00717229

I. Pillin, A. Kervoelen, A. Bourmaud, J. Goimard, N. Montrelay et al., Could oleaginous flax fibers be used as reinforcement for polymers?, Ind Crops Prod, vol.34, pp.1556-63, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00717210

A. Bourmaud, G. Ausias, G. Lebrun, M. Tachon, and C. Baley, Observation of the structure of a composite polypropylene/flax and damage mechanisms under stress, Ind Crops Prod, vol.43, pp.225-261, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00985158

M. Aslan, G. Chinga-carrasco, B. F. Sørensen, and B. Madsen, Strength variability of single flax fibres, J Mater Sci, vol.46, pp.6344-54, 2011.

G. Romhány, J. Karger-kocsis, and T. Czigány, Tensile fracture and failure behavior of technical flax fibers, J Appl Polym Sci, vol.90, pp.3638-3683, 2003.

A. Stamboulis, C. A. Baillie, S. K. Garkhail, H. Melick, . Van et al., Environmental Durability of Flax Fibres and their Composites based on Polypropylene Matrix, Appl Compos Mater, vol.7, pp.273-94, 2000.

J. Moothoo, S. Allaoui, P. Ouagne, and D. Soulat, A study of the tensile behaviour of flax tows and their potential for composite processing, Mater Des, vol.55, pp.764-72, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01071023

K. Charlet and A. Béakou, Mechanical properties of interfaces within a flax bundle -Part I: Experimental analysis, Int J Adhes Adhes, vol.31, pp.875-81, 2011.

A. S. , P. E. Bessadok, A. Lebrun, L. Morvan, C. Marais et al., Effect of chemical treatments on water sorption and mechanical properties of flax fibres

, Bioresour Technol, vol.100, pp.4742-4751, 2009.

M. F. Pucci, P. Liotier, D. Seveno, C. Fuentes, A. Van-vuure et al., Wetting and swelling property modifications of elementary flax fibres and their effects on the Liquid Composite Molding process, Compos Part A Appl Sci Manuf, vol.97, pp.31-40, 2017.
URL : https://hal.archives-ouvertes.fr/emse-01577440

N. Sgriccia, M. C. Hawley, and M. Misra, Characterization of natural fiber surfaces and natural fiber composites, Compos Part A Appl Sci Manuf, vol.39, pp.1632-1639, 2008.

V. Tserki, N. E. Zafeiropoulos, F. Simon, and C. Panayiotou, A study of the effect of acetylation and propionylation surface treatments on natural fibres, Compos Part A Appl Sci Manuf, vol.36, pp.1110-1118, 2005.

R. Girault, F. Bert, C. Rihouey, A. Jauneau, C. Morvan et al., Galactans and cellulose in flax fibres: putative contributions to the tensile strength, Int J Biol Macromol, vol.21, pp.179-88, 1997.

A. Roudier, Analyse multi-échelle du comportement hygro-mécanique des fibres de lin, 2012.

A. Thuault, S. Eve, D. Blond, J. Bréard, and M. Gomina, Effects of the hygrothermal environment on the mechanical properties of flax fibres, J Compos Mater, vol.48, pp.1699-707, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01943217

A. Célino, O. Gonçalves, F. Jacquemin, and S. Fréour, Qualitative and quantitative assessment of water sorption in natural fibres using ATR-FTIR spectroscopy

, Carbohydr Polym, vol.101, pp.163-70, 2014.

H. G. Carter and K. G. Kibler, Langmuir-Type Model for Anomalous Moisture Diffusion In Composite Resins, J Compos Mater, vol.12, pp.118-149, 1978.

P. Bardonnet, Résines époxydes -Composants et propriétés. Tech l'ingenieur -142

J. Li, X. Park, and S. , Synthesis and application of epoxy resins: A review, J Ind Eng Chem, vol.29, pp.1-11, 2015.

C. Barrere, D. Maso, and F. , Résines époxy réticulées par des polyamines : structure et propriétés, vol.52, pp.317-352, 1997.

F. Piasecki, Résines polyépoxydes nanostructurées aux propriétés d'adhésion et à la tenue au vieillissement améliorées, 2013.

J. K. Gillham, Formation and properties of thermosetting and highTg polymeric materials, Polym Eng Sci, vol.26, pp.1429-1462, 1986.

L. Epoxy,

J. Holbery and D. Houston, Natural-fibre-reinforced polymer composites in automotive applications, J Miner Met Mater Soc, vol.58, pp.80-86, 2006.

G. Coroller, A. Lefeuvre, L. Duigou, A. Bourmaud, A. Ausias et al., Effect of flax fibres individualisation on tensile failure of flax/epoxy unidirectional composite, Compos Part A Appl Sci Manuf, vol.51, pp.62-70, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00985219

L. S. Penn, H. E. Wang, and . Resins, Handb. Compos, pp.48-74, 1998.

J. Zhou and J. P. Lucas, Hygrothermal effects of epoxy resin. Part I: the nature of water in epoxy, Polymer (Guildf), vol.40, issue.98, pp.790-793, 1999.

Y. Diamant, G. Marom, and L. J. Broutman, The effect of network structure on moisture absorption of epoxy resins, J Appl Polym Sci, vol.26, pp.3015-3040, 1981.

Y. C. Lin and X. Chen, Investigation of moisture diffusion in epoxy system: Experiments and molecular dynamics simulations, Chem Phys Lett, vol.412, pp.322-328, 2005.

J. Zhou and J. P. Lucas, Hygrothermal effects of epoxy resin. Part II: variations of glass transition temperature, Polymer (Guildf), vol.40, issue.98, pp.791-796, 1999.

E. Brun, Vieillissement hygrothermique d'un composite résine époxyde silice et impact sur sa rigidité diélectrique, 2009.

J. Crank, The mathematics of diffusion, 1979.

J. Verdu, Action de l'eau sur les plastiques, AM, vol.3, pp.1-8, 2000.

E. Morel, V. Belleger, and J. Verdu, Relations structure-hydrophilie des réticulats époxyde-amine, 1984.

S. Karad, J. Jones, and D. Attwood, Moisture absorption by cyanate ester modified epoxy resin matrices. Part II. The reverse thermal effect, Polymer (Guildf), vol.43, pp.484-490, 2002.

M. J. Adamson, Thermal expansion and swelling of cured epoxy resin used in graphite/epoxy composite materials, J Mater Sci, vol.15, pp.1736-1781, 1980.

B. Fayolle and J. Verdu, Vieillissement physique des matériaux polymères. Tech l'ingenieur, pp.1-19, 2005.

A. Chateauminois, B. Chabert, J. P. Soulier, and L. Vincent, Dynamic mechanical analysis of epoxy composites plasticized by water: Artifact and reality, Polym Compos, vol.16, pp.288-96, 1995.

M. Gordon and J. S. Taylor, Ideal copolymers and the second-order transitions of synthetic rubbers. i. non-crystalline copolymers, J Appl Chem, vol.2, pp.493-500, 2007.

R. M. Hodge, T. J. Bastow, G. H. Edward, G. P. Simon, and A. J. Hill, Free Volume and the Mechanism of Plasticization in Water-Swollen Poly(vinyl alcohol), Macromolecules, vol.29, pp.8137-8180, 1996.

M. Sugisaki, H. Suga, and S. Seki, Calorimetric Study of the Glassy State. IV. Heat Capacities of Glassy Water and Cubic Ice, Bull Chem Soc Jpn, vol.41, pp.2591-2600, 1968.

P. Jenniskens and D. F. Blake, Crystallization of Amorphous Water Ice in the Solar System, Astrophys J, vol.473, pp.1104-1117, 1996.

G. Z. Xiao and M. Shanahan, Irreversible effects of hygrothermal aging on DGEBA/DDA epoxy resin, J Appl Polym Sci, vol.69, pp.363-372, 1998.

J. Verdu, Vieillissement chimique des plastiques : aspects généraux, AM, vol.3, pp.1-14, 2002.

B. De-neve and M. Shanahan, Physical and Chemical Effects in An Epoxy Resin Exposed to Water Vapour, J Adhes, vol.49, pp.165-76, 1995.

L. Treloar, The physics of rubber elasticity, p.144, 1975.

P. B. Gning, S. Liang, L. Guillaumat, and W. J. Pui, Influence of process and test parameters on the mechanical properties of flax/epoxy composites using response surface methodology, J Mater Sci, vol.46, pp.6801-6812, 2011.

N. D. Danieley and E. R. Long, Effects of curing on the glass transition temperature and moisture absorption of a neat epoxy resin, J Polym Sci Polym Chem Ed, vol.19, pp.2443-2452, 1981.

K. Van-de-velde and P. Kiekens, Effect of material and process parameters on the mechanical properties of unidirectional and multidirectional flax/polypropylene composites, Compos Struct, vol.62, pp.443-451, 2003.

D. B. Dittenber and H. Gangarao, Critical review of recent publications on use of natural composites in infrastructure, Compos Part A Appl Sci Manuf, vol.43, pp.1419-1448, 2012.

L. Duigou, A. Kervoelen, A. , L. Grand, A. Nardin et al., Interfacial properties of flax fibre-epoxy resin systems: Existence of a complex interphase
URL : https://hal.archives-ouvertes.fr/hal-01115504

, Compos Sci Technol, vol.100, pp.152-159, 2014.

I. El-sawi, Z. Fawaz, R. Zitoune, and H. Bougherara, An investigation of the damage mechanisms and fatigue life diagrams of flax fiber-reinforced polymer laminates
URL : https://hal.archives-ouvertes.fr/hal-01952558

, J Mater Sci, vol.49, pp.2338-2384, 2014.

L. Duigou, A. Davies, P. Baley, and C. , Exploring durability of interfaces in flax fibre/epoxy micro-composites, Compos Part A Appl Sci Manuf, vol.48, pp.121-129, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00985238

C. Poilâne, Z. E. Cherif, F. Richard, A. Vivet, B. Doudou et al., Polymer reinforced by flax fibres as a viscoelastoplastic material, Compos Struct, vol.112, pp.100-112, 2014.

N. Martin, P. Davies, and C. Baley, Comparison of the properties of scutched flax and flax tow for composite material reinforcement, Ind Crops Prod, vol.61, pp.284-92, 2014.

D. U. Shah, P. J. Schubel, P. Licence, and M. J. Clifford, Determining the minimum, critical and maximum fibre content for twisted yarn reinforced plant fibre composites, Compos Sci Technol, vol.72, pp.1909-1926, 2012.

C. N. Zarate, M. I. Aranguren, and M. M. Reboredo, Influence of fiber volume fraction and Références -145 -aspect ratio in resol-sisal composites, J Appl Polym Sci, vol.89, pp.2714-2736, 2003.

H. Liholt and B. Madsen, Volumetric composition in composites and historical data, Proc 18th Risø Int Symp Mater Sci, vol.34, pp.279-94, 2013.

M. Berges, R. Léger, V. Placet, V. Person, S. Corn et al., Influence of moisture uptake on the static, cyclic and dynamic behaviour of unidirectional flax fibre-reinforced epoxy laminates, Compos Part A Appl Sci Manuf, vol.88, pp.165-77, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01480243

I. Van-de-weyenberg, J. Ivens, D. Coster, A. Kino, B. Baetens et al., Influence of processing and chemical treatment of flax fibres on their composites

, Compos Sci Technol, vol.63, pp.1241-1247, 2003.

Y. Li, Q. Li, and H. Ma, The voids formation mechanisms and their effects on the mechanical properties of flax fiber reinforced epoxy composites, Compos Part A Appl Sci Manuf, vol.72, pp.40-48, 2015.

C. Poilâne, A. Vivet, L. Momayez, B. Doudou, . Ben et al., Propriétés mécaniques de préimprégnés lin/époxyde, JNC, vol.16

M. Hughes, J. Carpenter, and C. Hill, Deformation and fracture behaviour of flax fibre reinforced thermosetting polymer matrix composites, J Mater Sci, vol.42, pp.2499-511, 2007.

S. Prabhakaran, V. Krishnaraj, M. S. Kumar, and R. Zitoune, Sound and Vibration Damping Properties of Flax Fiber Reinforced Composites, Procedia Eng, vol.97, pp.573-81, 2014.
URL : https://hal.archives-ouvertes.fr/hal-02054330

L. Yan, N. Chouw, and K. Jayaraman, Effect of UV and water spraying on the mechanical properties of flax fabric reinforced polymer composites used for civil engineering applications, Mater Des, vol.71, pp.17-25, 2015.

A. Regazzi, Contribution à l'étude du vieillissement couplé thermo-hydromécaniqe de biocomposites PLA/lin. Ecole doctorale n°364, Mines ParisTech, 2013.

M. Stepczy?ska and P. Rytlewski, Enzymatic degradation of flax-fibers reinforced polylactide, Int Biodeterior Biodegradation, vol.126, pp.160-166, 2018.

H. Kim and D. Seo, Effect of water absorption fatigue on mechanical properties of Références -146 -sisal textile-reinforced composites, Int J Fatigue, vol.28, pp.1307-1321, 2006.

D. Scida, M. Assarar, C. Poilâne, and R. Ayad, Influence of hygrothermal ageing on the damage mechanisms of flax-fibre reinforced epoxy composite, Compos Part B Eng, vol.48, pp.51-59, 2013.

M. Khalfallah, B. Abbès, F. Abbès, Y. Q. Guo, V. Marcel et al., Innovative flax tapes reinforced Acrodur biocomposites: A new alternative for automotive applications, Mater Des, vol.64, pp.116-142, 2014.

K. Gradeci, N. Labonnote, B. Time, and J. Köhler, Mould growth criteria and design avoidance approaches in wood-based materials -A systematic review, Constr Build Mater, vol.150, pp.77-88, 2017.

T. Cadu, M. Berges, O. Sicot, V. Person, B. Piezel et al., What are the key parameters to produce a high-grade bio-based composite? Application to flax/epoxy UD laminates produced by thermocompression, Compos Part B Eng, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01889210

. Afnor, Aliments des animaux -Détermination séquentielle des constituants pariétaux -Méthode par traitement aux détergents neutre et acide et à l'acide sulfurique, pp.18-122, 2013.

P. J. Van-soest, J. B. Robertson, and B. A. Lewis, Methods for Dietary Fiber, Neutral Detergent Fiber, and Nonstarch Polysaccharides in Relation to Animal Nutrition, J Dairy Sci, vol.74, pp.3583-97, 1991.

J. El-yagoubi, G. Lubineau, A. Traidia, and J. Verdu, Monitoring and simulations of hydrolysis in epoxy matrix composites during hygrothermal aging, Compos Part A Appl Sci Manuf, vol.68, pp.184-92, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01086406

B. Masseteau, F. Michaud, M. Irle, A. Roy, and A. G. , An evaluation of the effects of moisture content on the modulus of elasticity of a unidirectional flax fiber composite, Compos Part A Appl Sci Manuf, vol.60, pp.32-39, 2014.

R. R. Corsetti, T. Neumeyer, M. May, D. Jandrey, V. Altstaedt et al., Modeling and estimation of parameters for the curing of an epoxy/amine system

, Polym Test, vol.32, pp.647-54, 2013.

R. B. Prime, Differential scanning calorimetry of the epoxy cure reaction, Polym Eng Sci, vol.13, pp.365-71, 1973.

M. G. González, J. C. Cabanelas, and J. Baselga, Applications of FTIR on Epoxy Resins -Références -147

, Monitoring the Curing Process , Phase Separation and Water Uptake, Infrared Spectrosc -Mater Sci Eng Technol, vol.2012, pp.261-84

J. George, J. Ivens, and I. Verpoest, Mechanical properties of flax fibre reinforced epoxy composites, Die Angew Makromol Chemie, vol.272, pp.41-46, 1999.

F. Duc, P. E. Bourban, C. Plummer, and J. Månson, Damping of thermoset and thermoplastic flax fibre composites, Compos Part A Appl Sci Manuf, vol.64, pp.115-138, 2014.

E. H. Saidane, D. Scida, M. Assarar, and R. Ayad, Assessment of 3D moisture diffusion parameters on flax/epoxy composites, Compos Part A Appl Sci Manuf, vol.80, pp.53-60, 2016.