.. .. Reference, of publications Riham GINZARLY, Ghaleb HOBLOS, Nazih MOUBAYED, "Faults in Hybrid Electric Vehicles' Permanent Magnet Machines

G. Riham, H. Ghaleb, and M. Nazih, Decision on Prognosis approaches of Hybrid Electric Vehicles' electrical machines, p.2015

G. Riham, A. Kawthar, H. Ghaleb, and M. Nazih, Numerical versus analytical techniques for healthy and faulty surface permanent magnet machine, p.2016

A. Kawthar, G. Riham, H. Ghaleb, and G. Barakat, Fault Detection and Identification Approach for Brushless Direct Current (DC) Motors based on Vibration Signal Analysis, 3rd Conference on Control and Fault-Tolerant Systems, Systol'16, 2016.

G. Riham, H. Ghaleb, and M. Nazih, Severity faults classification in hybrid electric vehicles' permanent magnet machines for prognostic purposes, International Journal of Computer Aided Engineering and Technology, 2017.

G. Riham, H. Ghaleb, and M. Nazih, Electromagnetic and vibration finite element model for early fault detection in permanent magnet machine, 10th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes, 2018.

G. Riham, H. Ghaleb, and M. Nazih, Localizing Turn to Turn Short Circuit in HEV's Machine Using Thermal Finite Element Model, IEEE International Multidisciplinary Conference on Engineering Technology (IMCET), 2018.

G. Riham, H. Ghaleb, and M. Nazih, Hidden Markov Model Based Failure Prognosis for Permanent Magnet Synchronous Machine, ACD European Workshop on Advanced Control and Diagnosis, 2019.

G. Riham, H. Ghaleb, and M. Nazih, From Modeling to Failure Prognosis of Permanent Magnet Synchronous Machine

, Political Economist, World Energy, 2016.

J. Rogelj, M. Schaeffer, and B. Hare, Climate analytics, timetables for zero emissions and 2050 emissions reductions: state of the science for the ADP agreement, 2015.

H. Al-sheikh, O. Bennouna, G. Hoblos, and N. Moubayed, Condition Monitoring of Bidirectional DC-DC Converter for Hybrid Electric Vehicles, IEEE 22nd Mediterranean Conference on Control and Automation, pp.16-19, 2014.

H. Al-sheikh, O. Bennouna, G. Hoblos, and N. Moubayed, Study on power converters used in Hybrid Vehicules with Monitoring and Diagnostics Techniques,17th IEEE Mediterranean Conference (MELECON 2014), pp.13-16, 2014.

M. Barcaro, N. Bianchi, and F. Magnussen, PM Motors for Hybrid Electric Vehicles, pp.135-141, 2009.

E. Odv´a and A. Mebarki, Electric motor-generator for a hybrid electric vehicle, Engineering MECHANICS Conference, pp.131-139, 2006.

S. Moussaddy, A. Zgheib, H. Dernayka, M. H. El-jamal, N. Moubayed et al., Requirements change using product lifecycle management for manufacturing process in the hybrid vehicle context, 7th International Conference on Electromecanical and power systems, pp.191-196, 2009.

M. Yabumoto and C. Kaido, Electrical Steel Sheet for Traction Motors of Hybrid/Electric Vehicles, Nippon Steel technical report, issue.87, 2003.

T. Finken and M. Felden, Comparison and design of different electrical machine types regarding their applicability in hybrid electrical vehicles, pp.1-5, 2008.

A. Simpson, Cost-Benefit Analysis of Plug-In Hybrid Electric Vehicle Technology, 22nd International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium and Exhibition, 2006.

B. Yang and A. Widodo, Introduction of Intelligent Machine Fault Diagnosis and Prognosis, 2009.

D. Winkler and C. Gühmann, Modelling of Electrical Faults in Induction Machines Using Modelica, The 48th Scandinavian Conference on Simulation and Modeling, pp.30-31, 2007.

H. Al-sheikh, O. Bennouna, G. Hoblos, and N. Moubayed, Study on power converters used in Hybrid Vehicules with Monitoring and Diagnostics Techniques,17th IEEE Mediterranean Conference (MELECON 2014), pp.13-16, 2014.

H. Al-sheikh, O. Bennouna, G. Hoblos, and N. Moubayed, Power Electronics Interface Configurations for Hybrid Energy Storage in Hybrid Electric Vehicles, 17th IEEE Mediterranean Conference (MELECON 2014), pp.13-16, 2014.

C. Sankavaram, A. Kodali, and K. Pattipati, An Integrated Health Management Process for Automotive Cyber-Physical Systems, IEEE International Conference on Computing, Networking and Communications, 2013.

A. Fuhs, Hybrid Vehicles and the Future of Personal Transportation, 2008.

M. Barcaro, N. Bianchi, and F. Magnussen, PM Motors for Hybrid Electric Vehicles, vol.2, pp.135-141, 2009.

C. Sankavaram, B. Pattipati, and A. Kodali, Model-based and data driven prognosis of automotive and electronic systems, IEEE Conference on Automation Science and Engineering, pp.22-25, 2011.

D. Winkler and C. Gühmann, Modelling of Electrical Faults in Induction Machines Using Modelica, 2007.

C. C. Chan, The state of the art of electric and hybrid vehicles, Proceedings of the IEEE, vol.90, issue.2, pp.247-275, 2002.

A. Emadi, K. Rajashekara, S. S. Williamson, and S. M. Lukic, Topological overview of hybrid electric and fuel cell vehicular power system architectures and configurations, IEEE Transactions on Vehicular Technology, vol.54, issue.3, pp.763-770, 2005.

O. D. Momoh and M. O. Omoigui, An overview of hybrid electric vehicle technology, Proceedings of the 5th IEEE Vehicle Power and Propulsion Conference (VPPC '09), pp.1286-1292, 2009.

T. Finken, M. Felden, and K. Hameyer, Comparison and design of different electrical machine types regarding their applicability in hybrid electrical vehicles, 2008.

M. Barcaro, N. Bianchi1, and F. Magnussen, PM Motors for Hybrid Electric Vehicles, the Open Fuels & Energy Science Journal, vol.2, pp.135-141, 2009.

A. Simpson, Cost-Benefit Analysis of Plug, Hybrid Electric Vehicle Technology, 22nd International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium and Exhibition (EVS-22), 2006.

J. Zheng, W. Zhao, J. Ji, and G. Liu, Design and comparison of interior permanent-magnet machines for hybrid electric vehicles, IEEE International Conference on Applied Superconductivity and Electromagnetic Devices (ASEMD), pp.20-23, 2015.

C. C. Chan, K. T. Chau, and J. Z. Jiang, Novel Permanent Magnet Motor Drives for Electric Vehicles, IEEE transactions on industrial electronics, vol.43, issue.2, 1996.

T. Schneider and A. Binder, Evaluation of new Surface Mounted Permanent Magnet Synchronous Machine with Finite Element Calculations, 2005.

B. Li and M. Li, Calculation and Analysis of Permanent Magnet Eddy Current Loss Fault with Magnet Segmentation, 2016.

J. Haataja and J. Pyrhönen, Permanent Magnet Assisted Synchronous Reluctance Motor: an Alternative Motor in Variable Speed Drives, Energy Efficiency in Motor Driven Systems, 2013.

T. Hu, F. Lin, and L. Cui, The Flux-Weakening Control of Interior Permanent Magnet Synchronous Traction Motors for High-Speed Train, proceedings of the 1st International Workshop on High-Speed and Intercity Railways, vol.147, 2012.

A. Wang, D. Ma, and H. Wang, FEA-Based Calculation of Performances of IPM Machines with Five Topologies for Hybrid-Electric Vehicle Traction, World Academy of Science, Engineering and Technology International Journal of Electrical, vol.7, issue.8, 2013.

N. Babu, T. , H. S. Himamshu, P. Kumar, and N. , Bearing Fault Detection Based on Daubechies Wavelet, archives of acoustics journal, vol.42, pp.401-414, 2017.

G. Henrique, B. Paulo, and R. Scalassara, Stator fault analysis of three-phase induction motors using information measures and artificial neural networks, electric power system research, vol.143, pp.347-356, 2017.

F. Garcia-guevara, F. J. Villalobos-piña, and R. Alvarez-salas, Stator Fault Detection in Induction Motors by Autoregressive Modeling, 2016.

J. Hong, D. Hyun, and T. Kang, Detection and Classification of Rotor Demagnetization and Eccentricity Faults for PM Synchronous Motors, IEEE Transactions on Industry Applications, vol.48, 2011.

A. Verma, S. Sarangi, and M. Kolekar, Misalignment fault detection in induction motor using rotor shaft vibration and stator current signature analysis, International Journal of Mechatronics and Manufacturing Systems, 2013.

M. Ahmed, K. Ahmed, M. Imran, J. Khan, and . Akhtar, Detection of Eccentricity Faults in Machine Using Frequency Spectrum Technique, International Journal of Computer and Electrical Engineering, vol.3, issue.1, 2011.

K. Tian, T. Zhang, Y. Ai, and W. Zhang, Induction Motors Dynamic Eccentricity Fault Diagnosis Based on the Combined Use of WPD and EMD-Simulation Study, applied science, 2018.

G. Zanardelli, E. G. Strangas, and H. K. Khalil, Comparison of Wavelet-Based Methods for the Prognosis of Failures in Electric Motors, 2002.

S. Nandi and H. A. Toliyat, Condition monitoring and fault diagnosis of electrical machines, IEEE Transactions on Energy Conversion, vol.20, p.4, 2005.

N. Hussein, D. Y. Mahmood, and E. M. Abdul-baki, 3-phase Induction Motor Bearing Fault Detection and Isolation using MCSA Technique based on neural network Algorithm, Journal of Engineering and Development, vol.16, issue.3, 2012.

W. T. Thomson and D. Rankin, on line current monitoring to diagnose airgap eccentricity histories verify the predictions in large three phase induction motors-industrial case, IEEE Transactions on Energy Conversion, vol.14, issue.4, 1999.

S. Lee and T. G. Habetler, An online stator winding resistance estimation techniquefor temperature monitoring of lineconnected inductionmachines, IEEE Industry Applications Conference, 2001.

J. S. Hsu, Possible errors in measurement of air-gap torque pulsations of induction motors, IEEE Transactions on Energy Conversion, vol.7, issue.1, 1992.

J. S. Hsu, Monitoring of Defects in Induction Motors Through Air-Gap Torque Observation, IEEE transactions on industry applications, vol.31, issue.5, 1995.

. Rs-mills, R. S. Ey-avan, and -. Dwyer, Piezoelectric sensors to monitor lubricant film thickness at piston-cylinder contacts in a fired engine, Institution of Mechanical Engineers, Journal of Engineering Tribology, vol.227, issue.2, pp.100-111, 2013.

J. Yun, K. Lee, and K. Lee, Detection and Classification of Stator Turn Faults and HighResistance Electrical Connections for Induction Machines, IEEE transaction on industry applications, vol.45, issue.2, 2009.

N. H-dymond, K. Stranges, and . Younsi, Stator winding failures: contamination, surface discharge, tracking, IEEE transaction, 2002.

P. Neti, P. Zhang, and X. Qi, Online detection of end winding contamination in industrial motors, Electrical Insulation Conference, 2011.

L. Enrique and C. Arroyo, Modeling and simulation of permanent magnet synchronous motor drive system, thesis submitted in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE in ELECTRICAL ENGINEERING, 2006.

W. T. Thomson and M. Fenger, Case Histories of Current Signature Analysis to Detect Faults in Induction Motor Drives, 2003.

, The motor guide, ABB, second edition, 2005.

A. Wang, D. Ma, and H. Wang, FEA-Based Calculation of Performances of IPM Machines with Five Topologies for Hybrid-Electric Vehicle Traction, World Academy of Science, Engineering and Technology International Journal of Electrical, vol.7, issue.8, 2013.

A. H. Bonnett, Root Cause AC Motor Failure Analysis with a Focus on Shaft Failures, IEEE transaction on industry applications, vol.36, issue.5, 2000.

A. Simpson, Cost-Benefit Analysis of Plug, Hybrid Electric Vehicle Technology, 2006.

A. Yang and S. Widodo, Introduction of Intelligent Machine Fault Diagnosis and Prognosis, 2010.

C. Pang, F. L. Lewis, T. , H. Lee, and Z. Dong, Intelligent Diagnosis and Prognosis of Industrial Networked Systems, 2017.

D. Galar, U. Kumar, R. Villarejo, and C. A. Johansson, Hybrid Prognosis for Railway Health Assessment: An Information Fusion Approach for PHM Deployment, 4th IEEE Conference on Prognostics and System Health Management (PHM), vol.33, 2013.

B. C. Mecrow, A. G. Jack, J. A. Haylock, and J. Coles, Fault-tolerant permanent magnet machine drives, IEE Proc -Electv. Power Appl, vol.143, issue.6, 1996.

U. Fayyad, G. Piatetsky-shapiro, and P. Smyth, From data mining to knowledge discovery: an overview, Advances in Knowledge Discovery and Data Mining, pp.1-34, 1996.

A. Lorton, M. Fouladirad, and A. Grall, A methodology for probabilistic model-based prognosis, European Journal of Operational Research, vol.225, issue.3, pp.443-454, 2013.
URL : https://hal.archives-ouvertes.fr/hal-02284358

T. Xia, X. Jin, L. Xi, and J. Ni, Operating load based real-time rolling grey forecasting for machine health prognosis in dynamic maintenance schedule, Journal of Intelligent Manufacturing, vol.26, issue.2, 2015.

R. Xiong, F. Sun, Z. Chen, and H. He, A data-driven multi-scale extended Kalman filtering based parameter and state estimation approach of lithium-ion polymer battery in electric vehicles, Applied energy, vol.113, issue.1, 2014.

C. Sankavaram, A. Kodali, and K. Pattipati, An Integrated Health Management Process for Automotive Cyber-Physical Systems, IEEE International Conference on Computing, Networking and Communications, 2013.

M. Yu and D. Wang, Model-Based Health Monitoring for a Vehicle Steering System with Multiple Faults of Unknown Types, IEEE tractions on industrial electronics, vol.61, issue.7, 2014.

S. Nandi and H. A. Toliyat, condition monitoring and fault diagnosis of electrical machines, IEEE Transactions on Energy Conversion, vol.20, p.4, 20005-12.

B. M. Ebrahimi, J. Faiz, and M. J. Roshtkhari, Static-, Dynamic-, and Mixed-Eccentricity Fault Diagnoses in Permanent-Magnet Synchronous Motors, IEEE Transactions on Industrial Electronics, vol.56, p.11, 2009.

R. Brutsch, M. Tari, and K. Frohlich, Insulation Failure Mechanisms of Power Generators, IEEE Electrical Insulation Magazine, vol.24, issue.4, pp.17-25, 2008.

Z. Wu, Conception optimale d'un entrainement electrique pour la chaine de traction d'un vehicule hybride electrique, 2012.
URL : https://hal.archives-ouvertes.fr/tel-00838732

J. Donea and A. Huerta, Finite Element Methods for Flow Problems, 2004.

D. Ishak, Z. Q. Zhu, and D. Howe, Eddy-current loss in the rotor magnets of permanent-magnet brushless machines having a fractional number of slots per pole, IEEE Transactions on Magnetics, vol.41, issue.9, pp.2462-2469, 2005.

S. J. Salon, Finite element analysis of electrical machines, 1995.

D. Dimarogonas, A. Andrew, G. Stefanos, and . Thomas, Analytical Methods in Rotor Dynamics, 2013.

D. Staton and A. Cavagnino, Convection Heat Transfer and Flow Calculations Suitable for Electric Machines Thermal Models, IEEE transaction on industrials of electronics, vol.55, issue.10, 2008.

G. Dajaku and D. Gerling, An Improved Lumped Parameter Thermal Model for Electrical Machines, Institute for Electrical Drives

J. Shazly, S. Wahsh, and A. Yassin, Author, Thermal modeling of an AFPMSM: A review, Journal of Electrical Systems and Information Technology, vol.2, pp.18-26, 2015.

V. Behjat, A Coupled Thermal-Electromagnetic FEM Model to Characterize the Thermal Behavior of Power Transformers Damaged by Short Circuit Faults, International Journal of Electrical Energy, vol.1, issue.4, 2013.

B. Peter and W. Thomas, Heat Transfer Basics and Practice, 2012.

S. Bhattacharya, F. Eckert, V. Boyko, A. Pich, M. Temperature? et al., , 2007.

S. G. Lee-;-t, . G. Habetler-;-r, and . Harley,

D. J. Gritter, An evaluation of model-based stator resistance estimation for induction motor stator winding temperature monitoring, IEEE Transactions on Energy Conversion, vol.17, p.1, 2002.

K. Hoffmann and S. Chiang, Computational fluid dynamics volume I

B. Weilharter, Noise Computation of Induction Machines, thesis dissertation, 2012.

R. Jazar, , 2013.

A. Saito, M. Kuroishi, and H. Nakai, Vibration Prediction Method of Electric Machines by using Experimental Transfer Function and Magnetostatic Finite Element Analysis, iop science, 2016.

J. Stratton, Electromagnetic theory, 2007.

D. A. Ghosh and G. Ledwich, Power Quality Enhancement Using Custom Power Devices, 2002.

J. Pyrhönen and T. Jokinen, Design of Rotating Electrical Machines, 2008.

C. Madache and L. Clapham, A model for magnetic flux leakage signal prediction, Journal of physics, vol.36, 2003.

J. F. Gieras, C. Wang, and J. C. Lai, Noise of polyphaser electric motors, 2006.

J. L. Besnerais, Reduction of magnetic noise in PWM-supplied induction machines-lownoise design rules and multi-objective optimization, 2008.
URL : https://hal.archives-ouvertes.fr/tel-00348730

A. B. Proca, A. Keyhani, A. El-antably, W. Lu, and M. Dai, Analytical model for permanent magnet motors with surface mounted magnets, IEEE Transactions on Energy Conversion, vol.18, issue.3, pp.386-391, 2003.

A. Mohammed and S. Djurovic, Stator Winding Internal Thermal Stress Monitoring and Analysis Using in-situ FBG Sensing Technology, IEEE Transactions on Energy Conversion, p.99, 2018.

A. Saha, FPGA based self-vibration compensated two dimensional non-contact vibration measurement using 2D position sensitive detector with remote monitoring, International Measurement Confederation, 2017.

L. Rabiner, a tutorial on hidden markov model and selected applications in speech recognition, proceedings of the IEEE, vol.77, issue.2, 1989.

G. Fettweis and H. Meyr, Feedforward Architectures for Parallel Viterbi Decoding, Journal of VLSI Signal Processing, vol.3, pp.105-119, 1991.

A. Heng, S. Zhang, and A. Tan, Rotating machinery prognostics: State of the art, challenges and opportunities, Mechanical Systems and Signal Processing, vol.23, pp.724-739, 2009.

S. Haider, W. Zanardelli, and S. Aviyente, Prognosis of Electrical Faults in Permanent Magnet AC Machines using the Hidden Markov Model, vol.10, 2010.

A. Mosallam, Remaining useful life estimation of critical components based on Bayesian Approaches, thesis, 2016.

K. Medjaher, D. Tobon-mejia, and N. Zerhouni, Remaining useful life estimation of critical components with application to bearings, IEEE Transactions on Reliability, Institute of Electrical and Electronics Engineers, vol.61, issue.2, pp.292-302, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00737596

M. Mishra, thesis: Model-based Prognostics for Prediction of Remaining Useful Life, 2015.

L. Gang, A Study on Remaining Useful Life Prediction for Prognostic Applications, 2011.

Z. Chen, S. Cao, and Z. Mao, Remaining Useful Life Estimation of Aircraft Engines Using a Modified Similarity and Supporting Vector Machine (SVM) Approach, 2017.

E. L. Brancato, Insulation aging a historical and critical review, IEEE Trans. Electr. Insul, vol.13, issue.4, 1978.

M. Hacen and H. , Kamal eddin, stochastic estimation methods for induction motor transient thermal monitoring under nonlinear condition, Leonardo journal of sciences, vol.20, pp.95-108, 2012.

N. Lahoud, J. Faucher, and D. Malec, Electrical Aging of the Insulation of Low Voltage Machines: Model definition and test with the Design of Experiments, IEEE Transactions on Industrial Electronics, Institute of Electrical and Electronics Engineers, vol.60, pp.4147-4155, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00845292

, Magnetic Products Online Brochure, Sagami Chemical Metal Co., Ltd, 2013.

A. Mosallam, K. Medjaher, and N. Zerhouni, Data-driven prognostic method based on Bayesian approaches for direct remaining useful life prediction, Journal of Intelligent Manufacturing, pp.1-20, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01025442

S. Klysz, G. Gmurkzyk, and J. Lisiecki, Fatigue of Aircraft Structures, pp.52-58, 2010.

F. M. Wong, Fatigue, Fracture, and Life Prediction Criteria for Composite Materials in Magnets, Plasma Fusion Center Massachusetts Institute of Technology Cambridge, 1990.

R. Citarella, A. Frattura, and S. , Coupled FEM-DBEM method to assess crack growth in magnet system of Wendelstein, vol.26, pp.92-103, 2013.

S. Jiang, W. Zhang, and X. Li, An Analytical Model for Fatigue Crack Propagation Prediction with Overload Effect, Mathematical Problems in Engineering, vol.2014, 2014.

G. and S. Lakshmi,

S. Kamakshaiah and ;. Das, Closed loop PI control of PMSM for hybrid electric vehicle using three level diode clamped inverter for optimal efficiency, IEEE, 2013.

M. Kuang, D. Smith, and F. Syed, Closed-loop power control system for hybrid electric vehicles, Ford Global Technologies LLC, 2003.

H. Al-sheikh, Condition monitoring of bidirectional dc-dc converter for hybrid electric vehicles, Control and Automation (MED), 2014.

H. Al-sheikh, O. Bennouna, G. Hoblos, N. Moubayed, . Al-sheikh et al., Modeling, design and fault analysis of bidirectional dc-dc converter for hybrid electric vehicles, IEEE 23rd International Symposium, pp.1689-1695, 2014.

H. Al-sheikh, G. Hoblos, and N. Moubayed, Study on power converters used in hybrid vehicles with monitoring and diagnostics techniques, Electrotechnical Conference (MELECON), 2014.

H. Al-sheikh, G. Hoblos, and N. Moubayed, Power electronics interface configurations for hybrid energy storage in hybrid electric vehicles, Electrotechnical Conference (MELECON), 17th IEEE Mediterranean, 2014.

W. Runxin and J. Liu, Redefining a new-formed average model for threephase boost rectifiers/voltage source inverters, 2009.

L. Zhao and H. Ma, Modeling and analysis of three-phase inverter based on generalized state space averaging method, 2013.

J. A. Houldsworth and D. A. Grant, The use of harmonic distortion to increase the output voltage of a three-phase PWM inverter, IEEE Transactions on Industry Applications, vol.5, pp.1224-1228, 1984.

L. Byoung-kuk and M. Ehsami, A simplified functional simulation model for three-phase voltage-source inverter using switching function concept, IEEE transactions on industrial electronics, pp.309-321, 2011.

M. Sébastien and M. Morari, Explicit model-predictive control of a PWM inverter with an LCL filter, IEEE Transactions on Industrial Electronics, pp.389-399, 2009.

M. Shahinur, N. Islam-raju, and A. U. Ahmed, Sinusoidal PWM signal generation technique for three phase voltage source inverter with analog circuit & simulation of PWM inverter for standalone load & micro-grid system, International Journal of Renewable Energy Research, pp.647-658, 2013.

Z. J. Shen and I. Omura, Power Semiconductor Devices for Hybrid, Electric, and Fuel Cell Vehicles, Proc. IEEE, vol.95, pp.778-789, 2007.

A. Kontar?ek, M. Nemec, P. Bajec, and V. Ambro?i?, Single Open-phase Fault Detection with FaultTolerant Control of an Inverter-fed Permanent Magnet Synchronous Machine, Autom. -J. Control. Meas. Electron. Comput. Commun, vol.55, issue.4, pp.474-486, 2014.

H. Saidi, N. Mansour, and M. Abdelhamid, Electric Vehicle Speed Control using Three Phase Inverter operated by DSP-based Space Vector Pulse Width Modulation Technique, Proceeding of the International Conference on Energy System, vol.32, 2015.

A. Waheed and M. Usman, Comparative study of SVPWM (space vector pulse width modulation) & SPWM (sinusoidal pulse width modulation) based three phase voltage source inverters for variable speed drive, IOP Conference Series: Materials Science and Engineering, vol.51, 2013.

Z. Bin, Simulation Investigation of SPWM, THIPWM and SVPWM Techniques for Three Phase Voltage Source Inverter, pp.223-240

P. Tripura, Y. Kishore-babu, and Y. R. Tagore, Space vector pulse width modulation schemes for two-level voltage source inverter, ACEEE Int. J. on control system and instrumentation, pp.34-38, 2011.

A. Kolli, O. Bethoux, A. Bernardinis, E. Laboure, and G. Coquery, Space Vector PWM Control Synthesis for a H-Bridge Drive in Electric Vehicles, IEEE Trans. Veh. Technol, vol.62, issue.6, pp.1-12, 2013.

B. Nagl, B. Czerny, M. Lederer, G. Khatibi, M. Thoben et al., Electrothermal analysis of in situ vibration measurements on IGBT modules under operation conditions, 4th Electron. Syst. Technol. Conf. ESTC 2012, pp.3-8, 2012.

K. Lakshmi and S. Begum, Space Vector PWM Control Synthesis for a H-Bridge Drive in Electric Vehicles, International journal of innovative technologies, vol.4, pp.588-596, 2016.

X. Perpiñà, L. Navarro, X. Jordà, M. Vellvehi, J. Serviere et al., Reliability and lifetime prediction for IGBT modules in railway traction chains, Reliab. Saf. Railw, pp.193-222, 2012.

B. Ji, X. Song, E. Sciberras, W. Cao, Y. Hu et al., Multi-Objective Design of IGBT Power Modules Considering Power Cycling and Thermal Cycling, IEEE Trans. Power Electron, vol.8993, issue.c, pp.1-1, 2014.

H. Medjahed, P. E. Vidal, and B. Nogarede, Thermo-mechanical stress of bonded wires used in high power modules with alternating and direct current modes, Microelectron. Reliab, vol.52, issue.6, pp.1099-1104, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00815975

A. Note, Thermal resistance of IGBT Modules -specification and modelling, pp.1-14, 2014.

V. Demuth, Power modules for hybrid and electric vehicles, 2010.

M. Ikonen, Power cycling lifetime estimation of igbt power modules based on chip temperature modeling, 2012.

R. John, O. Vermesan, and R. Bayerer, High temperature power electronics IGBT modules for electrical and hybrid vehicles, IMAPS High Temp. Electron. Netw, pp.199-204, 2009.

A. Vogel, K. Ciliox, and A. Schmal, IGBT with higher operation temperature -Power density, lifetime and impact on inverter design, pp.1-6, 2011.

V. Smet, Ageing and failure modes of IGBT modules in high temperature power cycling, IEEE Trans. Ind. Electron, vol.58, issue.10, pp.4931-4941, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00713206

T. Kovaltchouk, J. Aubry, B. Multon, and H. Ahmed, Influence of IGBT current 65 rating on the thermal cycling lifetime of a power electronic active rectifier in a direct wave energy converter, Eur. Conf. Power Electron. Appl. EPE, 2013.

I. F. Kovacevic and J. W. Kolar, Modelling for the Lifetime Prediction of Power Semiconductor Modules, Reliab. Power Electron. Convert. Syst, pp.103-140, 2015.

J. M. Urrea, Naval Postgraduate, Public Policy, p.89, 2006.

H. Abbad, A first approach on the failure mechanisms of IGBT inverters for aeronautical applications: Effect of humidity-pressure combination, Int. Power Electron. Conf. -ECCE Asia -, IPEC 2010, pp.2450-2456, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00584142

B. Czerny, M. Lederer, B. Nagl, A. Trnka, G. Khatibi et al., Thermo-mechanical analysis of bonding wires in IGBT modules under operating conditions, Microelectron. Reliab, vol.52, issue.9, pp.2353-2357, 2012.

G. Khatibi, M. Lederer, B. Weiss, T. Licht, J. Bernardi et al., Accelerated mechanical fatigue testing and lifetime of interconnects in microelectronics, Procedia Eng, vol.2, issue.1, pp.511-519, 2010.

M. T. Czerny, ;. Naglb, M. Lederera, A. Trnkac, and G. Khatibia, situ vibration measurements on power modules under operating conditions, pp.219-232, 2010.

A. Nishiura, S. Soyano, and A. Morozumi, IGBT Modules for Electric Hybrid Vehicles, Fuji Electr. Rev, vol.53, issue.3, pp.65-69, 2007.

W. C. Ji, V. Pickert, and B. Zahawi, Situ Diagnostics and Prognostics of Wire Bonding Faults in IGBT Modules forElectric Vehicle Drives, vol.28, pp.1-10, 2013.

K. Sasaki and N. Ohno, Fatigue life evaluation of aluminum bonding wire in silicone gel under random vibration testing, Microelectron. Reliab, vol.53, issue.9, pp.1766-1770, 2013.

E. Grunditz, Design and assessment of battery electric vehicle powertrain, with respect to performance, energy consumption and electric motor thermal capability, 2016.

M. Thoben, From vehicle drive cycle to reliability testing of power modules for hybrid vehicle inverter, 2008.

F. B. Chaaban, R. Chedid, and R. Ginzarly, Impacts of Machine Configurations on the Penetration Rates of Small-Scale Wind Power Units 1-Introduction 2-Machine Configurations, pp.1-9, 2013.

S. C. Kim, Thermal performance of motor and inverter in an integrated starter generator system for a hybrid electric vehicle, Energies, vol.6, pp.6102-6119, 2013.

R. Ginzarly, G. Hoblos, and N. Moubayed, Faults in hybrid electric vehicles' permanent magnet machines, Third Int. Conf. Technol. Adv. Electr. Electron. Comput. Eng, pp.169-174, 2015.

M. Masrur, Z. Chen, and Y. Murphey, Intelligent diagnosis of open and short circuit faults in electric drive inverters for real-time applications, IET Power Electron, vol.3, issue.2, p.279, 2010.

M. B. Sharifian, T. Herizchi, and K. G. Firouzjah, Field oriented control of permanent magnet synchronous motor using predictive space vector modulation, Ind. Electron. Appl, vol.2, issue.Isiea, pp.574-579, 2009.

D. Swierczynski and M. P. Kazmierkowski, Direct torque control of permanent magnet synchronous motor (PMSM) using space vector modulation (DTC-SVM)-simulation and experimental results, IEEE 28th Annual Conference of the Industrial Electronics Society. IECON 02, 2002.

G. Lakshmi, S. Kamakshaiah, and T. R. Das, Closed loop PI control of PMSM for hybrid electric vehicle using three level diode clamped inverter for optimal efficiency, International Conference on Energy Efficient Technologies for Sustainability, 2013.

M. Kuang, D. Smith, and F. Syed, Closed-loop power control system for hybrid electric vehicles, Ford Global Technologies LLC, 2003.

S. E. Levinson, L. R. Rabiner, and M. M. , Sondhi, an introduction to the application of the theory of probabilistic functions of a Markov process to automatic speech recognition, the bell system technical journal, vol.62, 1983.

B. Esmael, A. Arnaout, and G. Thonhauser, A statistical feature-based approach for operations recognition in drilling time series, International Journal of Computer Information Systems and Industrial Management Applications, vol.5, pp.454-461, 2013.

K. Alameh, N. Cité, G. Hoblos, and G. Barakat, Feature extraction for vibration-based fault detection in Permanent Magnet Synchronous Motors, Third International Conference on Technological Advances in Electrical, pp.163-168, 2015.

K. Alameh, R. Ginzarly, G. Hoblos, and G. Barakat, Modeling Approach and Fault Index Analysis of a Voltage-Source Brushless DC Motor, 3rd International Conference on Control and Fault-Tolerant Systems-SysTol'16, 2016.

J. Antoni and M. Sidahmed, Contrôle et diagnostic à partir des signaux acoustiques et vibratoires, Acoust. Tech, vol.38, pp.9-15, 2004.

D. Crombez, Analyse de signaux vibratoires pour le diagnostic de défauts : Application sur les boîtes de vitesses automobiles, 2011.

D. Augeix, Analyse vibratoire des machines tournantes, 2013.

, Spectral Estimation

G. Cybenko and V. Crespi, Learning Hidden Markov Models using Non-Negative Matrix Factorization, IEEE transactions on information theory, 2008.

D. Ramage, Hidden Markov Models Fundamentals, 2007.

K. Katta, Design of Convolutional Encoder and Viterbi Decoder using MATLAB, international Journal for research in emerging science and technology, vol.1, 2014.

G. W. Slade, The Viterbi algorithm demystified, 2014.

Z. Ghahramani, an introduction to Hidden Markov Models and Bayesian networks, international journal of pattern recognition and artificial intelligence, vol.15, pp.9-42, 2001.

M. A. Djeziri, S. Benmoussa, and M. Benbouzid, Data-driven approach augmented in simulation for robust fault prognosis, Engineering Applications of Artificial Intelligence, vol.86, pp.154-164, 2019.

M. A. Djeziri, S. Benmoussa, and R. Sanshez, Hybrid method for remaining useful life prediction in wind turbine systems, Renewable Energy, pp.173-187, 2018.

S. Benmoussa and M. A. Djeziri, Remaining Useful Life estimation without needing for prior knowledge of the degradation features, Measurement & Technology, 2017.

V. , , pp.1071-1078

L. Nguyen, M. A. Djeziri, B. Ananou, M. Ouladsine, and J. Pinaton, Fault prognosis for batch production based on percentile measure andgamma process: Application to semiconductor manufacturing, Journal of Process Control, vol.48, pp.72-80, 2016.