, Marché mondial des composites à fibres de verre

, Application des matériaux composites : position de la France

]. .. ,

, Dispersion de résultats (en traction) entre fibres élémentaires de lin (a) et de verre (b) [60, 68]

, Courbes contrainte-déformation de composites renforcés par des fibres de lin avant et après vieillissement hygrothermique

, images MEB). (a) Hermès, (b) Andrea [66]

, Courbes contrainte-déformation de composite lin UD/époxy avec un taux volumique de fibres V f fixé à 40%. (A) fibres non séchées et (B) fibres séchées

, Effet du taux volumique de fibres, V f , avec une vitesse de chargement fixée à 10 -6 s -1 , (b) Effet de la vitesse de chargement, Courbes contrainte-déformation de composite lin UD/époxy. (a)

. .. , Structure 3D de fibres de carbone fabriquées à base de PAN [86], p.24

, Comportement mécanique de composites carbone et verre/époxy UD et 2D. (a) comportement en traction, (b) rigidité spécifique [89]

, Réponse mécanique en traction de composites carbone/PPS et carbone/nylon

]. .. , Configurations des stratifiés hybrides. (a) Intercouches et (b) intracouches [93, p.27

, Contrainte en fonction de la déformation et (b) Allongement à la rupture en fonction de la fraction volumique de verre, F : Flax (lin), G : Glass (verre), FFRP : Flax fiber reinforced Polymer (composite renforcé par des fibres de lin), vol.97

, Young de composites hybrides lin-verre/époxy en fonction de la fraction volumique des fibres de verre

, Échelles liées aux renforts à base de fibres [99]

]. .. , , p.31

, Classification des porosités dans un composite

, Courbes variation relative de la résistance en cisaillement interlaminaire-taux de porosités pour des composites carbone/époxy [102]

, Moulage par compression (BMC et SMC)

]. .. ,

]. .. ,

]. .. ,

, Réponse typique d'un renfort fibreux en compaction

, Phénomènes résultant du comportement viscoélastique en compaction des renforts. (a) Relaxation, (b) Dépendance à la vitesse de sollicitation et (c) Hystérésis, vol.114

. Au, -dessus on a le déplacement imposé en fonction du temps alors qu'en-dessous on a la réponse du renfort

. .. , Phénomènes de réorganisation d'un renfort multicouches [132], p.43

. .. , Les cinq mécanismes intervenant lors de la compaction d'après [135], p.43

, Validation du modèle de Toll pour des renforts tissés et mats. Courbe pression de compaction en fonction de la porosité

.. .. Schéma-du-dispositif-d'infusion,

, Apparence de la préforme (ici la préforme est en carbone)

, Dispositif après infusion (phase de polymérisation)

, Cycle de cuisson des plaques composites

. .. , Méthodes de découpe des échantillons : laser (a) et scie diamantée (b), p.58

.. .. Image-de-la-compaction-filmée,

]. .. , , p.62

, Dispositif utilisé pour nos essais d'indentation

, Éprouvette de résilience posée sur deux appuis (sollicitée en flexion 3 points lors du choc avec marteau)

, Dispositif expérimental pour l'essai de résilience

.. .. Dispositif-d'essai-de-flexion,

, Validation du calcul de déplacement par CIN (Corrélation d'images numériques), p.70

, Représentation d'un essai de flexion trois points et des différents modes de rupture qui y sont liés

, Moniteur affichant un exemple de fonction de transfert

.. .. Apparence-des-renforts-lin,

.. .. Apparence-du-renfort-carbone,

. Schéma, , p.81

, ) : (a) image d'origine, (b) image rétro éclairée et (c) image seuillée, Images illustrant la détermination du taux de remplissage surfacique, p.83

. .. , Ajustement des courbes de compaction (exemple du renfort UD 175 g/m 2 ), p.86

, Précision de l'ajustement : intervalle de confiance (exemple du renfort UD 175 g/m 2 ), vol.87

, Critère d'identification des phases de compaction

, Section d'un empilement de tissus 2D à divers degrés de compaction : (a) V f = 29% (état non comprimé), (b) V f = 38%, (c) V f = 46% et (d) V f = 62% [153, p.90

. .. , Influence du nombre de plis : renforts synthétiques (carbone et verre), p.92

.. .. Comparaison-lin-ud-grille-/-lin-bi-biais,

, Images illustrant les espaces interstitiels dans les renforts

, Influence du grammage : comparaison UD de lin/UD grille de lin

. .. , Influence du grammage : comparaison des deux renforts bi-axiaux, p.97

, Influence du grammage : comparaison des deux tissus satins de verre, p.98

, Vue zoomée (a) et dessin manuel du tissu toile de lin (b)

, Dispositif montrant les observations optiques réalisées sur le tissu (a) et Image d'un noeud élémentaire du tissu (b)

, Images montrant les observations réalisées sur les fils

, Représentation 3D d'une maille du tissu de lin à armure toile, sous TexGen, p.108

E. and .. .. ,

, Montage des fils dans les mors de la machine

, Effet de la symétrie miroir lors du refroidissement après fabrication d'un stratifié

, 111 4.10 Influence de l'hybridation et de la séquence d'empilement sur la compaction : (a) et (b) Séquences non hybrides et, (c) et (d) séquences hybrides

, Répétabilité des essais : (a) les 5 essais expérimentaux et (b) courbe retenue (essai 5), p.120

, Comportement des composites lin et carbone en flexion : courbe contrainte-déformation 121

. .. Et-carbone, Évolution des propriétés mécaniques des composites lin, p.121

, Phénomènes de sink-in et de pile-up d'un matériau indenté (A) et les aires de contact correspondants

, Schéma montrant les différents déplacements intervenant dans la méthode d'Oliver et Pharr123

. Courbe-charge-décharge, . Oliver, and . .. Pharr, , p.124

, Étapes d'obtention des propriétés mécaniques des stratifiés composites en indentation, vol.128

, Exemple de courbe charge-décharge : méthode d'Oliver et Pharr (essai 1 séquence, p.129

, Évolutions du module d'indentation réduit et de la dureté en fonction de la séquence d'empilement (séquences non-hybrides)

, Schémas montrant l'endommagement des plis après la décharge pour les stratifiés nonhybrides

, Évolution de la résilience des composites lin et carbone

, Modes de rupture observés après les essais de choc pour les séquences non-hybrides : la première ligne est relative au composite carbone et la seconde au composite lin, p.136

, Mécanismes d'endommagement des éprouvettes composites carbone et lin, p.136

, Courbe montrant la décroissance de la réponse d'un système pseudopériodique

, Exemple d'une fonction de réponse en fréquence. Bonne répétabilité des essais, p.139

, Méthode -3dB pour la détermination du coefficient d'amortissement appliquée à un mode propre isolé (a) et à l'ensemble de tous les modes propres (b)

, Évolution de l'amortissement des composites lin et carbone en fonction de la fréquence, p.141

. .. Lin, Comparaison de toutes les propriétés des composites carbone et, p.142

, Composition des fibres naturelles (%)

, Propriétés mécaniques de quelques composites à fibres naturelles longues (TC : Thermocompression et ISV : Injection sous vide)

, Fractions massiques des composants de la fibre de lin (%)

, Propriétés géométriques de la fibre lin / Comparaison avec les autres fibres végétales

, Propriétés mécaniques

. .. , MPI : Moulage par compression et ISV : Injection sous vide), Propriétés mécaniques de quelques composites à fibres longues de lin, vol.21

]. .. , , p.24

, Influence des mécanismes de compaction selon Chen et al

, Quelques valeurs de c et n selon divers auteurs

. .. , Caractéristiques mécaniques de la matrice époxy (pour 15h de cuisson à 50 ? C), p.53

.. .. Caractéristiques-du-renfort-carbone,

, Propriétés mécaniques des fibres de verre [151]

, Taux de remplissage surfacique des différents renforts

, Influence du nombre de plis : tableau des valeurs de V f , pour les renforts synthétiques, p.89

U. D. Comparaison,

, Influence du grammage : tableau des valeurs de V f pour les 3 groupes de renfort, p.95

, Influence de la nature des fibres : tableau des valeurs de V f

. C-=-carbone-et-l-=-lin110, Définition des séquences d'empilement des stratifiés. s = symétrie

, Paramètres du modèle de compaction pour les empilements hybrides et coefficient de corrélation entre le fittage et l'expérimental

, Influence de l'hybridation et de la séquence d'empilement en compaction : tableau des valeurs de V f à P = 1 bar

.. .. Caractéristiques,

, Quantification de la microstructure des composites stratifiés

]. .. , , p.125

. .. , Valeurs des paramètres du modèle pour les stratifiés non-hybrides, p.130

. Liste and . Tableaux,

, Valeurs des différentes profondeurs de pénétration (en mm) pour les stratifiés non-hybrides avec F max = 5 kN

. .. , Valeurs de l'aire de contact projetée pour les stratifiés non-hybrides, p.130

, Valeurs de la raideur de contact pour les stratifiés non-hybrides

, Évolution de la fréquence propre (a) et de l'amortissement (b) des composites lin et carbone suivant les 4 premiers modes

, Valeurs des paramètres du modèle pour les stratifiés hybrides

, Valeurs des différentes profondeurs de pénétration (en mm) pour les stratifiés hybrides avec F

, Valeurs de l'aire de contact projetée pour les stratifiés hybrides

, Valeurs de la raideur de contact pour les stratifiés hybrides

, Évolution de la fréquence propre (a) et de l'amortissement (b) des composites hybrides suivant les 4 premiers modes

. .. , Gain apporté par la séquence d'empilement [CCLL] s au composite lin, p.156

, Gain apporté en indentation par la séquence d, vol.156

, Gain apporté par la séquence d'empilement [LLCC] s au composite carbone, p.157

. Propriétés-de-la-matrice and . Époxy,

, Coefficient d'anisotropie k E des fibres de lin

, Coefficients de rigidité Q i j des couches composites

. Valeur-de-la-cote-z-l-pour-le-stratifié,

, Valeurs des coefficients A i j et D i j pour le stratifié

, Valeurs des cotes pour le stratifié

, Valeurs des coefficients A i j et D i j pour le stratifié

, Valeurs des cotes pour le stratifié

, Valeurs des coefficients A i j et D i j pour le stratifié

, Valeurs des cotes pour le stratifié

, Valeurs des coefficients A i j et D i j pour le stratifié

, Valeurs des cotes pour le stratifié

, Valeurs des coefficients A i j et D i j pour le stratifié

. Valeur-de-la-cote-z-c-pour-le-stratifié,

, Valeurs des coefficients A i j et D i j pour le stratifié

, Module de flexion des stratifiés : comparaison résultats expérimentaux-résultats théo-riques (TCS)

S. Toll and J. Manson, An analysis of the compressibility of fiber assemblies, Proceedings of the Sixth International Conference on Fiber-Reinforced Composites, Institute of Materials, pp.25-26, 1994.

R. Gauvin, Y. Lemenn, P. Clerck, and F. Trochu, Compaction and creep behavior of glass reinforcement for liquid composites molding, Proceedings of the Tenth Annual ASM/ESD. Advanced Composites Conference, pp.357-367, 1994.

S. , Packing Mechanics of Fiber Reinforcements, Polymer Engineering & Science, vol.38, pp.1337-1350, 1998.

M. Matsudaira and H. Qin, Features and mechanical parameters of a fabric's compressional property, Journal of Textile Institute, vol.86, pp.476-486, 1995.

R. Gauvin and M. Chibani, Modelization of the clamping force and mold filling in resin transfer molding, Proceedings of the 43rd Society of the Plastics Industry Composite Institute, 1988.

J. Berthelot, Mécanique des Matériaux et Structures Composites, 2013.

T. Poumadère, F. Lachaud, G. Bernhart, R. Piquet, and F. Berthet, Etude du comportement d'un matériau composite réalisé par injection-transfert de fibres mi longues discontinues de carbone et de résine époxyde Investigation of the behaviour of a discontinuous medium length carbon fibres and epoxy resin composite mater, 17èmes Journées Nationales sur les Composites (JNC17), pp.1-9, 2011.

M. Suresh-advani, Process modeling in composites manufacturing, 2010.

S. Mazumdar, Composites Manufacturing : Materials, Product, and Process Engineering, 2002.

L. Berreur and B. De-maillard, L'industrie française des matériaux composites, 2002.

S. Joshi, L. Drzal, A. Mohanty, and S. Arora, Are natural fiber composites environmentally superior to glass fiber reinforced composites ?, Composites Part A : Applied Science and Manufacturing, vol.35, issue.3, pp.371-376, 2004.

P. Wambua, J. Ivens, and I. Verpoest, Natural fibres : Can they replace glass in fibre reinforced plastics ?, Composites Science and Technology, vol.63, issue.9, pp.1259-1264, 2003.

J. Wertz, Les biocomposites et composites polymère-chanvre en particulier, 2014.

M. Abdelmouleh, S. Boufi, M. Belgacem, and A. Dufresne, Short natural-fibre reinforced polyethylene and natural rubber composites : Effect of silane coupling agents and fibres loading, Composites Science and Technology, vol.67, issue.7-8, pp.1627-1639, 2007.

S. Ramarad, Preparation and properties of kenaf bast fiber filled (plasticized) poly(lactic acid) composites. Master of Science, 2008.

D. Loan, Investigation on jute fibres and their composites based on polypropylene and epoxy matrices, 2006.

M. Beg, The Improvement of Interfacial Bonding, Weathering and Recycling of Wood Fibre Reinforced Polypropylene Composites, 2007.

P. Joseph, G. Mathew, K. Joseph, G. Groeninckx, and S. Thomas, Dynamic mechanical properties of short sisal fibre reinforced polypropylene composites, Composites Part A : Applied Science and Manufacturing, vol.34, pp.275-290, 2003.

, Consultation sur les fibres naturelles. ESC-fibre consultation, pp.15-16, 2004.

K. Satyanarayana, K. Sukumaran, P. Mukherjee, C. Pavithran, and S. Pillai, Natural fibre-polymer composites, Cement and Concrete Composites, vol.12, issue.2, pp.117-136, 1990.

A. Bledzki and J. Gassan, Composites reinforced with cellulose based fibres, Progress in Polymer Science, vol.24, pp.221-274, 1999.

L. Yan, N. Chouw, and K. Jayaraman, Flax fibre and its composites -A review, Composites Part B : Engineering, vol.56, pp.296-317, 2014.

J. Summerscales, N. Dissanayake, A. Virk, and W. Hall, A review of bast fibres and their composites. Part 1 Fibres as reinforcements, Composites Part A : Applied Science and Manufacturing, vol.41, issue.10, pp.1329-1335, 2010.

P. Pereira, M. Rosa, M. Cioffi, K. Benini, A. Milanese et al., Vegetal fibers in polymeric composites : a review. Polímeros, vol.25, pp.9-22, 2015.

X. Li, L. Tabil, and P. Satyanarayan, Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites : A Review. Polymers and the Environment, pp.25-33, 2007.

M. John and D. Rajesh, Recent Developments in Chemical Modification and Characterization of Natural Fiber-Reinforced Composites, Polymer composites, pp.187-207, 2008.

H. Ku, H. Wang, N. Pattarachaiyakoop, and M. Trada, A review on the tensile properties of natural fiber reinforced polymer composites, Composites Part B : Engineering, vol.42, pp.856-873, 2011.

D. Dittenber and H. Gangarao, Critical review of recent publications on use of natural composites in infrastructure, Composites Part A : Applied Science and Manufacturing, vol.43, pp.1419-1429, 2012.

S. Mishra, A. Mohanty, L. Drzal, M. Misra, S. Parija et al., Studies on mechanical performance of biofibre/glass reinforced polyester hybrid composites, Composites Science and Technology, vol.63, pp.1377-385, 2003.

K. Rao and A. Prasad, Fabrication and testing of naturalfibre composites : vakka, sisal, bamboo and banana, Materials and Design, vol.31, pp.508-513, 2010.

Y. Li, L. Xie, and H. Ma, Permeability and mechanical properties of plant fiber reinforced hybrid composites, Materials and Design, vol.86, pp.313-320, 2015.

D. Rouison, M. Sain, and M. Couturier, Resin transfer molding of hemp fiber composites : optimization of the process and mechanical properties of the materials, Composites Science and Technology, vol.66, pp.895-906, 2006.

A. Choudhury, Isothermal crystallization and mechanical behavior of ionomer treated sisal/HDPE composites, Materials Science and Engineering : A, vol.491, pp.492-500, 2008.

M. Brahmakumar, C. Pavithran, and R. Pillai, Coconut fibre reinforced polyethylene composites : effect of natural waxy surface layer ofthe fibre on fibre/matrix interfacial bonding and strength of composites, Composites Science and Technology, vol.65, pp.563-569, 2005.

A. Bledzki and A. Jaszkiewicz, Mechanical performance of biocomposites based on PLA and PHBV reinforced with natural fibres -a comparative study to, PP. Composites Science and Technology, vol.70, pp.1687-1696, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00671654

K. Oksman, M. Skrivars, and J. Selin, Natural fibres as reinforcement in polylactic acid (PLA) composites, Composites Science Technologies, vol.63, pp.1317-1324, 2003.

E. Bodros, I. Pillin, N. Montrelay, and C. Baley, Could biopolymers reinforced by randomly scattered flax fibre be used in structural applications ?, Composites Sciences Technologies, vol.67, pp.462-470, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00399338

K. Charlet, Contribution à l'étude de composites unidirectionnels renforcés par des fibres de lin : relation entre la microstructure de la fibre et ses propriétés mécaniques, 2008.

C. Baley, Fibres naturelles de renfort pour matériaux composites, p.5130, 2013.

C. Baley, Renforcement des polymères par des fibres végétales, Revue des Composites et Maté-riaux Avancés, vol.16, 2006.

C. Baley, Analysis of the flax fibers tensile behaviour and analysis of the tensile stiffness increase, Composites : Part A, vol.33, pp.939-948, 2002.

A. Bismark, I. Aranberri-askargorta, and J. Springer, Surface characterization of flax, hemp and cellulose fibers -Surface properties and the water uptake behaviour, Polymer composites, vol.23, pp.872-894, 2002.

S. Batra, Other long vegetable fibers, 1998.

H. Lilholt, H. Toftegaard, A. Thomsen, and A. Schmidt, Natural composites based on cellulosic fibres and polypropylene matrix -Their processing and characterization. 12ème Conférence Internationale sur les Matériaux Composites, 1999.

I. Lapierre and P. Belmont, Bilan écologique du lin de la graine au tissu. Mémoire de fin d'étude. Ecole Nationale Supérieure des Arts et Industries Textiles de Roubaix, 1994.

D. Hon, A new dimensional creativity in lignocellulosic chemistry, 1996.

H. H. Khalil, H. Rozman, M. Ahmad, and H. Ismail, Acetylated plant-fibre-reinforced polyester composites : a study of mechanical, hydrothermal and aging characteristics, Polymer Plastic Technology Engineering, vol.39, pp.757-781, 2000.

V. Tserki, N. Zafeiropoulos, F. Simon, and C. Panayiotou, A study of the effect of acetylation and propionylation surface treatments on natural fibres, Composites : Part A, vol.36, pp.1110-1118, 2005.

Z. Azwa, B. Yousif, A. Manalo, and W. Karunasena, A review on the degradability of polymeric composites based on natural fibres, Materials and Design, vol.47, pp.424-442, 2013.

S. Batra, Other long vegetable fibers. Handbook of fiber science and technology, vol.4, 1985.

M. John and S. Thomas, Biofibres and biocomposites, Carbohydrate Polymers, vol.71, pp.343-364, 2008.

A. Bourmaud, Contribution à l'étude multi-échelles de fibres végétales et de biocomposites-lin, 2011.

K. Cheour, Analyse du comportement en vibration des matériaux composites à fibres végétales, 2017.

A. Hallonet, Développement et caractérisation d'un matériau composite à base de fibres de lin : application au renforcement de structures en béton par collage externe, 2016.

H. Lilholt and J. Lawther, Natural organic fibers, 2000.

M. Harris, Harris's Handbook of textile fibers, 1954.

R. Rowell, J. Han, and J. Rowell, Characterization and factors effecting fiber properties. Natural Polymers and Agrofibers composites, pp.115-134, 2000.

H. Stout and J. Jenkins, Comparative strengths of some bast and leaf fibres, Annales Textiles Belges, pp.231-251, 1955.

A. Thuault, Approche multi-échelle de la structure et du comportement mécanique de la fibre de lin, 2011.

V. Placet, Characterization of the thermo-mechanical behaviour of Hemp fibres intended for the manufacturing of high performance composites, Composites Part A : Applied Science and Manufacturing, vol.40, pp.1111-1118, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00395479

F. Silva and N. Chawla, Tensile behavior of high performance natural (sisal) fibers. Composites Science and Technology, vol.68, pp.3438-3443, 2008.

K. Charlet, S. Eve, J. Jernot, M. Gomina, and J. Breard, Tensile deformation of a flax fibre, Procedia Engineering, vol.1, pp.233-236, 2009.

S. Alix, E. Philippe, A. Bessadok, L. Lebrun, C. Morvan et al., Effect of chemical treatments on water sorption and mechanical properties of flax fibres, Bioresource Technology, vol.100, pp.893-899, 2009.

C. Baley, A. L. Duigou, A. Bourmaud, and P. Davies, Influence of drying on the mechanical behaviour of flax fibres and their unidirectional composites, Composites Part A : Applied Science and Manufacturing, vol.43, pp.1226-1233, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00717191

G. Coroller, A. Lefeuvre, A. L. Duigou, A. Bourmaud, and G. Ausias, Effect of flax individualisation on tensile failure of flax/epoxy unidirectional composite, Composites : Part A, vol.51, pp.62-70, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00985219

I. Pillin, A. Kervoelen, A. Bourmaud, J. Goimard, N. Montrelay et al., Could oleaginous flax fibres be used as reinforcement for polymers, Industrial Crops and Products, vol.34, pp.1556-1563, 2011.

A. Ridruejo, C. Gonzalez, and J. Llorca, Damage micromechanisms and notch sensitivity of glass-fiber non-woven felts : An experimental and numerical study, Journal of the Mechanics and Physics of Solids, vol.58, pp.1628-1645, 2010.

A. L. Duigou, A. Kervoelen, A. L. Grand, M. Nardin, and C. Baley, Interfacial properties of flax fibre epoxy resin systems : Existence of a complex interphase, Composites Science and Technology, vol.100, pp.152-157, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01115504

G. Romhany, J. Karger-kocsis, and T. Czigany, Tensile fracture and failure behavior of technical flax fibres, Applied Polymer Science, vol.90, pp.3638-3645, 2003.

N. Barkoula, S. Garkhail, and T. Peijs, Biodegradable composites based on flax/polyhydroxybutyrate and its copolymer with hydroxyvalerate, Industrial Crops and Products, vol.31, pp.34-42, 2010.

M. Hughes, J. Carpenter, and C. Hill, Deformation and fracture behaviour of flax fiber reinforced thermosetting polymer matrix composites, Materials Science, vol.42, pp.2499-2511, 2007.

B. Muralidhar, Study of flax hybrid preforms reinforced epoxy composites, Materials & Design, vol.52, pp.835-840, 2013.

K. Oksman, High quality flax fibre composites manufactured by the resin transfer moulding process, Reinforced Plastics and Composites, vol.20, pp.621-627, 2001.

I. Van-de-weyenberg, T. C. Truong, B. Vangrimde, and I. Verpoest, Improving the properties of DU flax fibre reinforced composites by applying an alkaline treatment, Composite Part A, vol.37, pp.1368-1376, 2006.

S. Liang, P. Gning, and L. Guillaumat, A comparative study of fatigue behaviour of flax/epoxy and glass/epoxy composites, Composites Science and Technology, vol.72, pp.535-543, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00709531

F. Bensadoun, K. Vallons, L. Lessard, I. Verpoest, and A. Van-vuure, Residual properties and damage evolution of flax-epoxy composites subjected to fatigue loading, 20th International Conference on Composite Materials, 2015.

Y. Ueki, H. Lilholt, and B. Madsen, Fatigue bahaviour of uni-directional flax fibre/epoxy composites, Proceeding 20th International Conference on Composite Materials

S. Liang, P. Gning, and L. Guillaumat, Properties evolution of flax/epoxy composites under fatigue loading, International Journal of Fatigue, vol.63, pp.36-45, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01067057

C. Poilâne, Z. Cherif, F. Richard, A. Vivet, and B. Ben-doudou, Polymer reinforced by flax fibers as a viscoelastoplastic material, Composite Structures, vol.112, pp.100-112, 2014.

I. Van-de-weyenberg, J. Ivens, A. D. Coster, and B. Kino, Influence of processing and chemical treatment of flax fibres on their composites, Composites Science and Technology, vol.63, pp.1241-1246, 2003.

D. Scida, M. Assarar, C. Poilâne, and R. Ayad, Influence of hygrothermal ageing on the damage mechanisms of flax-fibre reinforced epoxy composite, Composites Part B : Engineering, vol.48, pp.51-58, 2013.

I. Liu, D. Oehlers, and R. Seracino, Study of Intermediate Crack Debonding in Adhesively Plated Beams, Journal Compos. Constr, Special issue : recent International Advancements in FRP Research and Application in Construction, vol.11, pp.175-183, 2007.

X. Huang, Fabrication and Properties of Carbon Fibers, Materials, pp.2369-2403, 2009.

Z. Dai, B. Zhang, F. Shi, M. Li, Z. Zhang et al., Effect of heat treatment on carbon fiber surface properties and fibers/epoxy interfacial adhesion, Applied Surface Science, pp.8457-8461, 2011.

D. Johnson, Structure-property relationships in carbon fibres, Applied Physics, pp.286-291, 1987.

T. Risson, Comportement en fluage de composites à renfort carbone et matrices époxyde et PEEK, 1998.

Z. Jing, Différents traitements de surface des fibres de carbone et leur influence sur les propriétés à l'interface dans les composites fibres de carbone/résine époxyde, École centrale des Arts et Manufactures de, 2012.

S. Drapier, Mécanique des Composites Hautes Performances Version 2. École Nationale Supé-rieure des Mines de Saint-Étienne, pp.0-79, 2014.

N. Oya and H. Hamada, Mechanical properties and failure mechanisms of carbon fibre reinforced thermoplastic laminates, Composites Part A, pp.823-832, 1997.

L. Toubal, B. Lorrain, M. Karama, and D. Ratel, Etude du comportement non linéaire d'un composite Carbone / Epoxy, pp.1-6

L. Drzal and M. Madhukar, Fibre-matrix adhesion and its relationship to composite mechanical properties, Journal of Materials Science, pp.569-610, 1993.

Y. Swolfs, L. Gorbatikh, and I. Verpoest, Fibre hybridisation in polymer composites : A review, Composites Part A, vol.67, pp.181-200, 2014.

M. Davoodi, S. Sapuan, D. Ahmad, A. Ali, A. Khalina et al., Mechanical properties of hybrid kenaf/glass reinforced epoxy composite for passenger car bumper beam, Materials and Design, vol.31, pp.4927-4932, 2010.

A. Bakar and H. Khalil, Lignocellulose-based hybrid bilayer laminate composite : part Istudies on tensile and impact behavior of oil palm fiber-glass fiberreinforced epoxy resin, Journal of Composite Materials, vol.39, pp.663-684, 2005.

K. Ahmed and S. Vijayarangan, Tensile, flexural and interlaminar shear properties of woven jute and jute-glass fabric reinforced polyester composites, Journal of Materials Processing Technology, vol.207, pp.330-335, 2008.

Y. Zhang, Y. Li, H. Ma, and Y. Yu, Tensile and interfacial properties of unidirectional flax/glass fiber reinforced hybrid composites, Composites Science and Technology, vol.88, pp.172-177, 2013.

S. Amico, C. Angrizani, and M. Drummond, Influence of the stacking sequence on the mechanical properties of glass/sisal hybrid composites, Journal of Reinforced Plastics and Composites, pp.1-11, 2008.

C. Binetruy, Calcul et validation expérimentale de la perméabilité et prévision de l'imprégnation de tissus en moulage RTM, 1996.

S. Cadinot, Aspects rhéologiques de la compressibilité d'un renfort fibreux pour matériaux composites : Études en compression et relaxation, 2002.

H. Schoeller, Hydrogéologie. Ecole Nationnale Supérieur du Pétrole, p.443, 1955.

Y. Ledru, Etude de la porosite dans les materiaux composites stratifies aeronautiques, 2009.

B. Harper, G. Staab, and R. Chen, A note on the effects of voids upon the hygral and mechanical properties of

/. Graphite and . Epoxy, Journal of Composite Materials, vol.21, pp.280-289, 1987.

L. Liu, B. Zhang, and D. Wang, Void content in carbon/epoxy composites and its effects on flexural properties, 49th International Sampe Symposium and Exhibition, pp.254-261, 2004.

M. Wisnom, T. Reynolds, and N. Gwilliam, Reduction in ILSS by discrete and distributed Voids, Composites Science and Technology, vol.56, pp.93-101, 1996.

P. Olivier, J. Cottu, and B. Ferret, Effects of cure cycle pressure and voids on some mechanical properties of carbon/epoxy laminates, Composites, vol.26, pp.509-515, 1995.

M. Mihaluta, Etude de la mise en oeuvre industrielle d'un nouveau procédé de mise en forme de produits composites, École Nationale Supérieure d'Arts et Métiers, 2011.

C. Garnier, Etude du comportement dynamique des structures composites réalisées par LRI : application à l'impact et à la fatigue, 2011.

R. Carreira, Les matériaux composites dans l'industrie des sports et loisirs, 2005.

T. Nguyen, Analyse expérimentale et numérique de la compaction des renforts fi breux : Application pour la perméabilité, INSA, 2011.

J. Renaud, Préformage de tissus 3D interlock de carbone pour la fabrication de composites en injection flexible, 2016.

J. Gutiérrez, Étude des vibrations mécaniques dans la fabrication des composites par injection sur renfort, Canada, 2013.

B. Gupta and Y. E. Mogahzy, Friction in fibrous materials : Part I : Structural model, Textile Research Journal, vol.61, pp.547-555, 1991.

S. Bickerton, M. Buntain, and A. Somashekar, The viscoelastic compression behavior of liquid composite mold ing preforms, Composites Part A : Applied Science and Manufacturing, vol.34, pp.431-444, 2003.

C. Rudd, L. Bulmer, D. Morris, and K. Kendall, Compaction and in plane permeability characteristics of quasi unidirectional and continuous random reinforcements, Materials Science and Technology, vol.12, pp.436-444, 1996.

R. Saunders, C. Lekakou, and M. Bader, Compression and microstructure of fibre plain woven cloths in the processing of polymer composites, Composites, Part A, vol.29, pp.443-454, 1998.

R. Saunders, C. Lekakou, and M. Bader, Compression in the processing of polymer composites. 1 : A mechanical and microstructural study for differents glass fabrics and resins, Composites Science and Technology, vol.59, pp.983-993, 1999.

F. Robitaille and R. Gauvin, Compaction of textile reinforcements for composites manufacturing. II : Compaction and relaxation of dry and H2O-saturated woven reinforcements, Polymer Composites, vol.19, pp.543-557, 1998.

Y. Kim, . Mc, S. Carthy, and . Fanucci, Compressibility and relaxation of fiber reinforcements during composite processing, Polymer Composites, vol.12, pp.13-19, 1991.

N. Pearce and J. Summerscales, The compressibility of a reinforcement fabric, Composites Manufacturing, vol.6, pp.15-21, 1995.

F. Robitaille, R. Gauvin, and P. Clerck, Compaction of fiber reinforcement for composite manufacturing : a review of experimental results, Canada, 1996.

S. Morel, Contribution à l'optimisation de l'architecture des renforts des composites moulés par injection RTM, 2001.

B. Chen, A. Cheng, and T. Chou, A non linear compaction model for fibrous preforms, Composites, Part A, vol.32, pp.701-707, 2001.

K. Rugg and B. Cox, Deformation Mechanisms of Dry Textile Preforms under Mixed Compressive and Shear Loading, Journal of Reinforced Plastics and Composites, vol.23, pp.1425-1442, 2004.

I. Roselman and D. Tabor, The friction of carbon fibers, Journal of Physics D : Applied Physics, vol.9, pp.2517-2532, 1976.

B. Cornelissen, B. Rietman, and R. Akkerman, Frictional behaviour of high performance fibrous tows : Friction experiments, Composites Part A : Applied Science and Manufacturing, vol.44, pp.95-104, 2012.

S. Lomov, I. Verpoest, M. Barburski, and J. Laperre, Carbon composites based on multiaxial multiply stitched preforms. Part 2. KES-F characterisation of the deformability of the preforms at low loads, Composites Part A : Applied Science and Manufacturing, vol.34, pp.359-370, 2003.

G. Hivet, S. Allaoui, B. Cam, P. Ouagne, and D. Soulat, Design and potentiality of an apparatus for measuring yarn/yarn and fabric/fabric friction, Experimental mechanics, vol.52, pp.1123-1136, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00772343

S. Lomov and I. Verpoest, Compression of woven reinforcements : a mathematical model, Journal of Reinforced Plastics and Composites, vol.19, pp.1329-1350, 2000.

Z. Chen, L. Ye, and T. Kruckenberg, A micromechanical compaction model for woven fabric preforms. Part I : Single layer, Composites Science and Technology, vol.66, pp.3254-3262, 2006.

Z. Chen and L. Ye, A micromechanical compaction model for woven fabric preforms, Part II : Multilayer. Composites Science and Technology, vol.66, pp.3263-3272, 2006.

T. Kruckenberg, L. Ye, and R. Paton, Static and vibration compaction and microstructure analysis on plain-woven textile fabrics, Composites Part A : Applied Science and Manufacturing, vol.39, pp.488-502, 2008.

F. Robitaille and R. Gauvin, Compaction of textile reinforcements for composites manufacturing. III : Reorganization of the fiber network, Polymer Composites, vol.20, pp.48-61, 1999.

A. Somashekar, S. Bickerton, and D. Bhattacharyya, Exploring the non-elastic compression deformation of dry glass fibre reinforcements, Composites Science and Technology, vol.67, pp.183-200, 2007.

B. Chen, E. Lang, and T. Chou, Experimental and theoretical studies of fabric compaction behavior in Resin Transfer Molding, Materials Science and Engineering A, vol.317, pp.188-196, 2001.

C. Lekakou, M. Johari, and M. Bader, Compressibility and flow permeability of two dimensional woven reinforcements in the processing of composites, Polymer Composites, vol.17, pp.666-672, 1996.

R. Saunders, C. Lekakou, and M. Bader, Compression in the processing of polymer composites. 2 : Modelling of the viscoelastic compression of resin-impregnated fibre networks, Composites Science and Technology, vol.59, pp.1483-1494, 1999.

F. Robitaille and R. Gauvin, Compaction of textile reinforcements for composites manufacturing. I : Review of experimental results, Polymer Composites, vol.19, pp.198-216, 1998.

Y. Luo and I. Verpoest, Compressibility and relaxation of a new sandwich textile preform for liquid composite molding, Polymer Composites, vol.20, pp.179-191, 1999.

L. Trevino, K. Rupel, W. Young, M. Liou, and L. Lee, Analysis of resin injection molding in molds with preplaced fiber mats. I : permeability and compressibility measurements, Polymer Composites, vol.12, pp.20-29, 1991.

A. Endruweit and A. Long, Analysis of compressibility and permeability of selected 3D woven reinforcements, Journal of Composite Materials, vol.44, pp.2833-2862, 2010.

C. Van-wyk, Note on the Compressibility of Wool, Journal of the Textile Institute, vol.37, pp.285-292, 1946.

J. Quinn and J. Randall, Proceedings of the 4th International Technical Conference on the FibreReinforced Composites. Institution of Mechanical Engineers, pp.105-112, 1990.

C. Wu, T. Wang, and L. Lee, Trans-plane fluid permeability measurement and its applications in liquid composite molding, Polymer Composites, vol.15, pp.289-298, 1994.

M. Pucci, P. Liotier, and S. Drapier, Capillary effects on flax fibers -Modification and characterization of the wetting dynamics, Composites Part A : Applied Science and Manufacturing, vol.77, pp.257-265, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01353509

E. Brahim, Apport des outils d ' optimisation pour l ' identification des lois de comportement mécanique des matériaux, 2015.

D. François, Essais de rupture Essais par choc, vol.33, pp.0-19, 2013.

G. Crammond, S. Boyd, and J. Dulieu-barton, Speckle pattern quality assessment for digital image correlation, Optics and Lasers in Engineering, vol.51, issue.12, pp.1368-1378, 2013.

P. Vacher,

J. Aucher, Etude comparative du comportement composites à matrice thermoplastique ou thermodurcissable, lnstitut National des Sciences Appliquées de, 2009.
URL : https://hal.archives-ouvertes.fr/tel-00557897

A. Berthereau and E. Dallies, Fibres de verre de renforcement, vol.33, pp.1-19, 2008.

T. Ouahbi, C. Park, A. Saouab, P. Ouagne, and J. Bréard, Identification of preform compressibility by inverse method, The 9th International Conference on Flow Processes in Composite Materials Montréal, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00658662

B. Chen, E. Lang, and T. Chou, Experimental and theoretical studies of fabric compaction behavior in resin transfer molding, Materials Science and Engineering A, vol.317, issue.1-2, pp.188-196, 2001.

D. Shah, Developing plant fibre composites for structural applications by optimising composite parameters : A critical review, Journal of Materials Science, vol.48, issue.18, pp.6083-6107, 2013.

B. Madsen, Properties of plant fibre yarn polymer composites -an experimental study, 2004.

D. Shah, D. Porter, and F. Vollrath, Opportunities for silk textiles in reinforced biocomposites : Studying through-thickness compaction behaviour, Composites Part A : Applied Science and Manufacturing, vol.62, pp.1-10, 2014.

C. Bouvet, Dimensionnement des structures composites : Applications à l'aéronautique. ISTE Editions, p.316, 2018.

H. Abdellaoui, R. Bouhfid, J. Echaabi, and A. Qaiss, Experimental and modeling study of viscoelastic behaviour of woven dried jute under compressive stress, Journal of Reinforced Plastics and Composites, vol.34, issue.5, pp.405-420, 2015.

A. Hammami and B. Gebart, Analysis of the vacuum infusion molding process, Polymer Composites, vol.21, issue.1, pp.28-40, 2000.

T. Le, Rhéologie et microstructures des matériaux composites à matrice polymèrethermodur-cissable chargée minéralement et renforcée par des fibres de verre, 2008.

M. Rask and B. Madsen, Twisting of fibres in yarns for natural fibre composites, 18th International Conference on Composite Materials, pp.1-5, 2011.

Y. Song, Évaluation de l'apport simultané des coutures sur la perméabilité des préformes cousues et sur les performances mécaniques des structures composites cousues, 2015.

X. Liu, Développement de la caractérisation du comportement local à haute température des alliages métalliques par micro indentation, 2017.

A. Fischer-cripps, Nanoindentation Testing, Introduction to Contact Mechanics, pp.20-35, 2000.

A. Bolshakov and G. Pharr, Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques, Journal of materials research, vol.13, issue.4, pp.1049-1058, 1998.

I. Sneddon, Relation between load and penetration in the axisymmetric Boussinesq problem for a punch of arbitrary profile, International Journal of Engineering Sciences, vol.3, issue.638, pp.47-57, 1965.

H. Hertz, Über die Berührung fester elastischer Körper, Journal für die reine und angewandte Mathematik, vol.92, pp.156-171, 1882.

M. Doerner and W. Nix, A method for interpreting the data from depth-sensing indentation instrurnents, Journal of Materials Research, vol.1, issue.4, pp.601-609, 1986.

W. Oliver and G. Pharr, An improved technique for determining hardness and elastic modulus, Journal of Materials Research, vol.7, pp.1564-1583, 1992.
URL : https://hal.archives-ouvertes.fr/hal-01518596

J. Field and M. Swain, A simple predictive model for spherical indentation, Journal of Materials Research, vol.8, pp.297-306, 1993.

G. Pharr and A. Bolshako, Understanding nanoindentation unloading curves, Journal of Materials Research, vol.17, issue.2, pp.2660-2671, 2002.

W. Oliver and G. Pharr, Measurement of hardness and elastic modulus by instrumented indentation : Advances in understanding and refinements to methodology, Journal of Materials Research, vol.19, pp.3-20, 2004.

R. King, Elastic analysis of some punch problems for a layered medium, International Journal of Solids and Structures, vol.23, issue.12, pp.1657-1664, 1987.

A. Fischer-cripps, A review of analysis methods for sub-micron indentation testing, Vacuum, vol.58, pp.569-585, 2000.

J. Delgado, Détermination des propriétés mécaniques et des lois de comportement en fluage par indentation instrumentée, 2009.

Q. Kan, W. Yan, G. Kang, and Q. Sun, Journal of the Mechanics and Physics of Solids OliverPharr indentation method in determining elastic moduli of shape memory alloys -A phase transformable material, Journal of the Mechanics and Physics of Solids, vol.61, issue.10, pp.2015-2033, 2015.

H. Zhao, Y. Zhong, and Z. Ma, Effects of indentation depth on micro hardness and scratch behavior of thin composite laminate, Journal of Alloys and Compounds, vol.680, pp.105-108, 2016.

M. Kumar, A. Prasad, and D. Ravishankar, Effect of Indenter loading Rate on Hybridized composite Laminates Subjected to Quasi-static indentation, Research Journal of Material Sciences, vol.2, issue.4, pp.1-6, 2014.

O. Jorgensen, A. Giannakopoulos, and S. Suresh, Spherical indentation of composite laminates with controlled gradients in elastic anisotropy, International Journal of Solids Structures, vol.35, issue.36, pp.5097-5113, 1998.

C. Kumar, V. Arumugam, and C. Santulli, Characterization of indentation damage resistance of hybrid composite laminates using acoustic emission monitoring, Composites Part B, vol.111, pp.165-178, 2017.

Z. Al-hajaj, B. Lawrence, H. Bougherara, and R. Zdero, Impact properties of a new hybrid composite material made from woven carbon fi bres plus flax fibres in an epoxy matrix, Composite Structures, vol.208, pp.346-356, 2019.

M. Jawaid, S. Sapuan, and O. Aloth, Green Biocomposites : Manufacturing and Properties. Springer, p.409, 2016.

H. Dhakal, Z. Zhang, R. Guthrie, J. Macmullen, and N. Bennett, Development of flax/carbon fibre hybrid composites for enhanced properties, Carbohydrate Polymers, vol.96, issue.1, pp.1-8, 2013.

A. Ismail, S. Khalid, and N. Nor, A Review on the Perforated Impact Energy Absorption of Kenaf Fibres Reinforced Composites, Journal of Physics : Conference Series, vol.914, 2017.

A. Camposo, S. Neves, F. Salgado, D. Assis, F. Muylaert et al., Charpy impact tenacity of epoxy matrix composites reinforced with aligned jute fibers, Journal of Materials Research and Technology, vol.6, issue.4, pp.312-316, 2017.

W. Hufenbach, F. Ibraim, A. Langkamp, R. Bohm, and A. Hornig, Charpy impact tests on composite structures -An experimental and numerical investigation, Composites Science and Technology, vol.68, pp.2391-2400, 2008.

M. Bulut and Y. Bozkurt, Hybridization Effects on Charpy Impact Behavior of Basalt / Aramid Fiber Reinforced Hybrid Composite Laminates, Polymer Composites, vol.39, pp.467-475, 2018.

G. Oliveira, F. Muylaert, C. Gomes, and D. Ribeiro, Charpy Impact Tests of Epoxy Composites Reinforced with Giant Bamboo Fibers, Materials Research, vol.18, issue.2, pp.178-184, 2015.

C. Poilâne, A. Vivet, L. Momayez, B. Doudou, M. Ayachi et al., Propriétés mécaniques de préimprégnés lin / époxyde = Mechanical properties of flax/epoxy industrial prepregs, JNC, vol.16, 2009.

F. Duc, P. Bourban, and J. Manson, Dynamic mechanical properties of epoxy/flax fibre composites, Journal of Reinforced Plastics and Composites, vol.33, issue.17, pp.1625-1633, 2014.

F. Duc, P. Bourban, and J. Manson, The role of twist and crimp on the vibration behaviour of flax fibre composites, Composites Science and Technology, vol.102, pp.94-99, 2014.

J. Vanwalleghem, I. De-baere, S. Huysman, L. Lapeire, K. Verbeken et al., Effective use of transient vibration damping results for nondestructive measurements of fibre-matrix adhesion of fibre-reinforced flax and carbon composites, Polymer Testing, vol.55, pp.269-277, 2016.

L. Yan, Effect of alkali treatment on vibration characteristics and mechanical properties of natural fabric reinforced composites, Journal of Reinforced Plastics and Composites, vol.31, issue.13, pp.887-896, 2012.

M. Ben-ameur, J. Rebiere, A. E. Mahi, M. Beyaoui, and M. Abdennadher, Propriétés dynamiques des composites stratifiés à fibres hybrides lin/carbone. 14 ème Congrès Français d'Acoustique, Avril, pp.997-1001, 2018.

F. Duc, P. Bourban, C. Plummer, and J. Manson, Damping of thermoset and thermoplastic flax fibre composites, Composites Part A : Applied Science and Manufacturing, vol.64, pp.115-123, 2014.

P. Vannucci, Matériaux composites structuraux, 2017.

M. Fehri, Comportements mécanique et hydrique des composites renforcés par des fibres naturelles et/ou conventionnelles, 2018.

H. Miyagawa, T. Mase, C. Sato, E. Drown, L. Drzal et al., Comparison of experimental and theoretical transverse elastic modulus of carbon fibers, Carbon, vol.44, 2002.

D. Mounier, C. Poilâne, C. Bûcher, and P. Picart, Evaluation of transverse elastic properties of fibers used in composite materials by laser resonant ultrasound spectroscopy, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00811303

S. Ramdoum, H. Fekirini, F. Bouafia, S. Benbarek, B. Serier et al., Carbone/epoxy interface debond growth using the Contour Integral/Cohesive zone method, Composites Part B, 2018.

D. Chung, Carbon Fiber Composites, 1994.

D. Scida, A. Bourmaud, and C. Baley, Influence of the scattering of flax fibres properties on flax/epoxy woven ply stiffness, Materials & Design, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01697245

K. Goto, M. Arai, T. Matsuda, and G. Kubo, Elasto-viscoplastic analysis for negative throughthe-thickness Poisson's ratio of woven laminate composites based on homogenization theory, International Journal of Mechanical Sciences, pp.455-461, 2017.

E. Sparnins, Mechanical Properties of Flax Fibers and Their Composites, 2009.

J. Cichocki and . Thomason, Thermoelastic anisotropy of a natural fiber, Composites Science and Technology, vol.62, pp.669-678, 2002.

B. Madsen and H. Lilholt, Physical and mechanical properties of unidirectional plant fibre composites -an evaluation of the influence of porosity, Composites Science and Technology, vol.63, pp.1265-1272, 2003.

A. Thygesen, A. Belinda, G. Daniel, and H. Lilholt, Comparison of composites made from fungal defibrated hemp with composites of traditional hemp yarn, Industrial Crops and Products, vol.25, pp.147-159, 2007.

H. Tofttegaard and H. Lilholt, Effective stiffness and strength of flax fibres derived from short fibre laminates, Proceedings of the 23rd international Symposium on Materials Science, pp.325-334, 2002.

T. Falher, A. Vivet, N. Ouail, B. Ben, Z. Cherif et al., Influence of Textile Treatment on Mechanical and Sorption Properties of Flax / Epoxy Composites, Polymer composites, vol.34, pp.1761-1773, 2013.