C. W. Macosko, Rheology: Principles, Measurements, and Applications, 1994.

J. F. Maingonnat, J. L. Doublier, J. Lefebvre, and G. Delaplace, Power consumption of a double ribbon impeller with newtonian and shear thinning fluids and during the gelation of a iota-carrageenan solution, Journal of food engineering, vol.87, issue.1, pp.82-90, 2008.

N. Mitsuishi and N. Hirai, Power requirements in the agitation of non-Newtonian fluids, Journal of Chemical Engineering of Japan, vol.2, issue.2, pp.217-224, 1969.

S. Nagata, Mixing: Principles and Applications, 1975.

J. M. Piau, Carbopol gels: Elastoviscoplastic and slippery glasses made of individual swollen sponges: Meso-and macroscopic properties, constitutive equations and scaling laws, Journal of non-newtonian fluid mechanics, vol.144, issue.1, pp.1-29, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00352873

F. Rieger and V. Novak, Power consumption scale-up in agitating non-Newtonian fluids, Chemical Engineering Science, vol.29, issue.11, pp.2229-2234, 1974.

J. R. Samaniuk, J. Wang, T. W. Root, C. T. Scott, and D. J. Klingenberg, Rheology of concentrated biomass, Korea-Australia Rheology Journal, vol.23, issue.4, pp.237-245, 2011.

M. Sepehr, G. Ausias, and P. J. Carreau, Rheological properties of short fiber filled polypropylene in transient shear flow, Journal of Non-Newtonian Fluid Mechanics, vol.123, issue.1, pp.19-32, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00326143

J. J. Stickel, J. S. Knutsen, M. W. Liberatore, W. Luu, D. W. Bousfield et al., Rheology measurements of a biomass slurry: an inter-laboratory study, Rheologica Acta, vol.48, issue.9, pp.1005-1015, 2009.

A. Sun and S. Gunasekaran, Yield stress in foods: measurements and applications, International Journal of Food Properties, vol.12, issue.1, pp.70-101, 2009.

T. Forster-carneiro, M. Pérez, and L. I. Romero, Influence of total solid and inoculum contents on performance of anaerobic reactors treating food waste, Bioresource technology, issue.15, pp.6994-7002, 2008.

D. García-bernet, P. Buffière, E. Latrille, J. Steyer, and R. Escudié, Water distribution in biowastes and digestates of dry anaerobic digestion technology, Chemical engineering journal, vol.172, issue.2, pp.924-928, 2011.

D. Garcia-bernet, D. Loisel, G. Guizard, P. Buffière, J. P. Steyer et al., Rapid measurement of the yield stress of anaerobically-digested solid waste using slump tests, Waste management, vol.31, issue.4, pp.631-635, 2011.

A. E. James, D. J. Williams, and P. R. Williams, Direct measurement of static yield properties of cohesive suspensions, Rheologica Acta, vol.26, issue.5, pp.437-446, 1987.

R. J. Kerekes and C. J. Schell, Characterization of fibre flocculation regimes by a crowding factor, Journal of pulp and paper science, vol.18, issue.1, pp.32-38, 1992.

J. S. Knutsen and M. W. Liberatore, Rheology of high-solids biomass slurries for biorefinery applications, Journal of Rheology, vol.53, issue.4, pp.877-892, 2009.

P. V. Liddel and D. V. Boger, Yield stress measurements with the vane, Journal of nonnewtonian fluid mechanics, vol.63, issue.2, pp.235-261, 1996.

A. Magnin and J. M. Piau, Shear rheometry of fluids with a yield stress, Journal of NonNewtonian Fluid Mechanics, vol.23, pp.91-106, 1987.

L. Martinie, P. Rossi, and N. Roussel, Rheology of fiber reinforced cementitious materials: classification and prediction, vol.40, pp.226-234, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01872804

S. G. Mason, The flocculation of pulp suspensions and the formation of paper, vol.33, pp.440-444, 1950.

S. G. Mason, The motion of fibres in flowing liquids, Pulp Paper Mag. Can, vol.51, issue.4, pp.93-100, 1950.

S. G. Mason, Fiber motions and flocculation, vol.37, pp.494-501, 1954.

W. Nan, Y. Wang, Y. Ge, and J. Wang, Effect of shape parameters of fiber on the packing structure, Powder Technology, vol.261, pp.210-218, 2014.

N. V. Pimenova and T. R. Hanley, Effect of corn stover concentration on rheological characteristics, Proceedings of the Twenty-Fifth Symposium on Biotechnology for Fuels and Chemicals Held, pp.347-360, 2003.

J. R. Samaniuk, J. Wang, T. W. Root, C. T. Scott, and D. J. Klingenberg, Rheology of concentrated biomass, Korea-Australia Rheology Journal, vol.23, issue.4, pp.237-245, 2011.

R. M. Soszy?ski, The formation and properties of coherent flocs in fibre suspensions, 1987.

J. J. Stickel, J. S. Knutsen, M. W. Liberatore, W. Luu, D. W. Bousfield et al., Rheology measurements of a biomass slurry: an inter-laboratory study, Rheologica Acta, vol.48, issue.9, pp.1005-1015, 2009.

J. J. Stickel and R. L. Powell, Fluid mechanics and rheology of dense suspensions, Annu. Rev. Fluid Mech, vol.37, pp.129-149, 2005.

A. Swerin, R. L. Powell, and L. Ödberg, Linear and nonlinear dynamic viscoelasticity of pulp fiber suspensions, Nordic Pulp and Paper Research Journal, 1992.

I. Switzer, L. H. Klingenberg, and D. J. , Rheology of sheared flexible fiber suspensions via fiber-level simulations, Journal of Rheology, vol.47, issue.3, pp.759-778, 2003.

L. H. Switzer and D. J. Klingenberg, Flocculation in simulations of sheared fiber suspensions, International Journal of Multiphase Flow, vol.30, issue.1, pp.67-87, 2004.

S. Toll, Packing mechanics of fiber reinforcements, Polymer Engineering & Science, vol.38, issue.8, pp.1337-1350, 1998.

J. Vaxelaire and P. Cézac, Moisture distribution in activated sludges: a review, Water Research, vol.38, issue.9, pp.2215-2230, 2004.
URL : https://hal.archives-ouvertes.fr/hal-02155270

S. Viamajala, J. D. Mcmillan, D. J. Schell, and R. T. Elander, Rheology of corn stover slurries at high solids concentrations-effects of saccharification and particle size, Bioresource technology, vol.100, issue.2, pp.925-934, 2009.

S. Viamajala, J. D. Mcmillan, D. J. Schell, and R. T. Elander, Rheology of corn stover slurries at high solids concentrations-effects of saccharification and particle size, Bioresource technology, vol.100, issue.2, pp.925-934, 2009.

T. Wikström and A. Rasmuson, The yield stress of pulp suspensions-The influence of fibre properties and processing conditions, Nordic Pulp&Paper Research J, vol.13, pp.78-85, 1998.

S. R. Williams and A. P. Philipse, Random packings of spheres and spherocylinders simulated by mechanical contraction, Physical Review E, vol.67, issue.5, p.51301, 2003.

M. Wiman, B. Palmqvist, E. Tornberg, and G. Lidén, Rheological characterization of dilute acid pretreated softwood, Biotechnology and Bioengineering, vol.108, issue.5, pp.1031-1041, 2011.

M. Wiman, B. Palmqvist, E. Tornberg, and G. Lidén, Rheological characterization of dilute acid pretreated softwood, Biotechnology and Bioengineering, vol.108, issue.5, pp.1031-1041, 2011.

A. Wouterse, S. Luding, and A. P. Philipse, On contact numbers in random rod packings, Granular Matter, vol.11, issue.3, pp.169-177, 2009.

, Utiliser un récipient et une pale respectant les conditions optimales illustrées en (figure II.7) et vérifier que le système d'anti-glissement est bien fixé

, Introduire une partie de la quantité envisagée de l'échantillon, chauffé à la température souhaitée

, Faire baisser la pale du scissomètre jusqu'à la hauteur optimale L2 représentée en (figure II, vol.7

, Ajouter le reste d'échantillon entre les lames du scissomètre jusqu'à atteindre la hauteur optimale de l'échantillon représentée en (figure II, vol.7

, Revérifier que la température de l'échantillon est à ± 2 °C de la température souhaitée, si la mesure doit être effectuée à une température donnée

, Lancer la mesure avec une vitesse de (0,1 tr/min)

, A la fin de la mesure, sortir la lame du scissomètre, vider le récipient, homogénéiser de nouveau l'échantillon, vider le récipient et refaire la mesure (étapes de 2 à 6) pour estimer la répétabilité

. Iv, Références bibliographiques

A. Achkari-begdouri and P. R. Goodrich, Rheological properties of Moroccan dairy cattle manure, Bioresource technology, vol.40, issue.2, pp.149-156, 1992.

B. J. Ackerson and N. A. Clark, Shear-induced melting, Physical Review Letters, vol.46, issue.2, p.123, 1981.

C. P. Bennington, R. J. Kerekes, and J. R. Grace, The yield stress of fibre suspensions, The Canadian journal of chemical engineering, vol.68, issue.5, pp.748-757, 1990.

Y. R. Chen, Rheological properties of sieved beef-cattle manure slurry: Rheological model and effects of temperature and solids concentration, Agricultural wastes, vol.15, issue.1, pp.17-33, 1986.

M. Dooms, Etude des compartiments d'hydrolyse et de méthanogenèse d'un procédé de méthanisation en voie épaisse multiétapes phasé en température : le procédé Arkométha ®, 2017.

M. R. Ehrhardt, T. O. Monz, T. W. Root, R. K. Connelly, C. T. Scott et al., Rheology of dilute acid hydrolyzed corn stover at high solids concentration, Applied biochemistry and biotechnology, vol.160, issue.4, pp.1102-1115, 2010.

H. M. El-mashad, W. K. Van-loon, G. Zeeman, and G. P. Bot, Rheological properties of dairy cattle manure, Bioresource technology, vol.96, issue.5, pp.531-535, 2005.

A. Fall, Rhéophysique des fluides complexes: écoulement et blocage de suspensions, 2008.

M. Kumar, H. D. Bartlett, and N. N. Mohsenin, Flow properties of animal waste slurries, Transactions of the ASAE, vol.15, issue.4, pp.718-0722, 1972.

H. Landry, C. Laguë, and M. Roberge, Physical and rheological properties of manure products, Applied Engineering in Agriculture, vol.20, issue.3, p.277, 2004.

G. Liu, Y. Liu, Z. Wang, Y. Lei, Z. Chen et al., The effects of temperature, organic matter and time-dependency on rheological properties of dry anaerobic digested swine manure, Waste Management, vol.38, pp.449-454, 2015.

C. W. Macosko, Rheology: Principles, Measurements, and Applications, 1994.

S. G. Mayr, Activation energy of shear transformation zones: a key for understanding rheology of glasses and liquids, Physical review letters, vol.97, issue.19, p.195501, 2006.

S. Minaei and S. J. Razavi, Rheological properties of sand-laden dairy manure: modeling by concentration and temperature, Agricultural Engineering International: CIGR Journal, vol.17, issue.1, 2015.

N. V. Pimenova and T. R. Hanley, Measurement of rheological properties of corn stover suspensions, Biotechnology for Fuels and Chemicals, pp.383-392, 2003.

N. V. Pimenova and T. R. Hanley, Effect of corn stover concentration on rheological characteristics, Proceedings of the Twenty-Fifth Symposium on Biotechnology for Fuels and Chemicals Held, pp.347-360, 2003.

. Springer,

J. R. Samaniuk, J. Wang, T. W. Root, C. T. Scott, and D. J. Klingenberg, Rheology of concentrated biomass, Korea-Australia Rheology Journal, vol.23, issue.4, pp.237-245, 2011.

T. Sato, Rheology of suspensions, JCT, Journal of coatings technology, vol.67, issue.847, pp.69-79, 1995.

E. L. Shetler and Y. Chen, Temperature effect on rheological properties of cattle manure slurry, Journal of testing and evaluation, vol.11, issue.6, pp.360-364, 1983.

J. J. Stickel, J. S. Knutsen, M. W. Liberatore, W. Luu, D. W. Bousfield et al., Rheology measurements of a biomass slurry: an interlaboratory study, Rheologica Acta, vol.48, issue.9, pp.1005-1015, 2009.

L. Tian, F. Shen, H. Yuan, D. Zou, Y. Liu et al., Reducing agitation energy-consumption by improving rheological properties of corn stover substrate in anaerobic digestion, Bioresource technology, vol.168, pp.86-91, 2014.

S. Viamajala, J. D. Mcmillan, D. J. Schell, and R. T. Elander, Rheology of corn stover slurries at high solids concentrations-effects of saccharification and particle size, Bioresource technology, vol.100, issue.2, pp.925-934, 2009.

M. Wiman, B. Palmqvist, E. Tornberg, and G. Lidén, Rheological characterization of dilute acid pretreated softwood, Biotechnology and bioengineering, vol.108, issue.5, pp.1031-1041, 2011.

M. Wiman, B. Palmqvist, E. Tornberg, and G. Lidén, Rheological characterization of dilute acid pretreated softwood, Biotechnology and Bioengineering, vol.108, issue.5, pp.1031-1041, 2011.

A. Zafari and M. H. Kianmehr, Livestock manure management and pelleting, Agricultural Engineering International: CIGR Journal, vol.14, issue.3, pp.78-84, 2012.