, ABAQUS. v6.14 documentation. Dassault Systemes Simulia Corporation, 2014.

J. Araujo and D. Nowell, The effect of rapidly varying contact stress fields on fretting fatigue, International Journal of Fatigue, vol.24, issue.7, pp.763-775, 2002.

M. Baietto, E. Pierres, A. Gravouil, B. Berthel, S. Fouvry et al., Fretting fatigue crack growth simulation based on a combined experimental and XFEM strategy, International Journal of Fatigue, vol.47, pp.31-43, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00938378

L. Barrallier, G. Barreau, and J. Barralis, Influence de l'origine de la relaxation des contraintes résiduelles dans le cas d'aciers alliés. Revue de métallurgie, vol.05, pp.637-649, 1993.

O. Basquin, The exponential law of endurance tests, In Proc Am Soc Test Mater, vol.10, pp.625-630, 1910.

T. Belytschko, W. K. Liu, and B. Moran, Finite elements for nonlinear continua and structures, 2000.

S. Beretta and S. Foletti, Propagation of small cracks under RCF: a challenge to Multiaxial Fatigue Criteria, CP2012, 2012.

A. P. Boresi, R. J. Schmidt, O. M. Sidebottom, and ;. , Advanced mechanics of materials, vol.6, 1985.

P. Brevet, Microstructure et propriétés mécaniques des aciers pour câble, Bulletin des laboratoires des Ponts et Chaussées, pp.249-250, 2004.

F. Bussolati, M. Guiton, P. Guidault, Y. Poirette, M. Martinez et al., A new fully-detailed finite element of spiral strand wire ropes for fatigue life estimate of a mooring line, ASME 2019 38th International Conference on Ocean, 2019.

S. Butterfield, W. Musial, J. Jonkman, P. Sclavounos, and L. Wayman, Engineering challenges for floating offshore wind turbines, Copenhagen Offshore Wind Conference, pp.377-382, 2005.

C. Chaplin and A. Potts, Wire rope offshore -a critical review of wire rope endurance research affecting offshore applications, 1991.

A. Cardona, An integrated approach to mechanism analysis, 1990.

C. Cattaneo, Sul contatto di due corpi elastici: Distribuzione locale degli sforzi. Reconditi dell, Academia Nazionale dei Lincei, vol.27, pp.474-478, 1938.

C. Chaplin, Interactive fatigue in wire rope applications, Symposium on Mechanics of Slender Structures, 2008.

C. Chaplin, A. Potts, and A. Curtis, Degradation of wire rope mooring lines in SE Asian waters, Kuala Lumpur, Offshore Asia Conference, 2008.

C. Chaplin, G. Rebel, and I. Ridge, Tension/torsion interactions in multicomponent mooring lines, Offshore Technology Conference. Offshore Technology Conference, 2000.

Y. Chen, F. Meng, and X. Gong, Interwire wear and its influence on contact behavior of wire rope strand subjected to cyclic bending load, Wear, vol.368, pp.470-484, 2016.

M. Ciavarella and F. Monno, A comparison of multiaxial fatigue criteria as applied to rolling contact fatigue, Tribology International, vol.43, issue.11, pp.2139-2144, 2010.

R. Claren and G. Diana, Dynamic strain distribution on loaded stranded cables, IEEE Transactions on Power Apparatus and Systems, issue.11, pp.1678-1690, 1969.

G. A. Costello, Theory of wire rope, 1997.

B. Crossland, Effect of large hydrostatic pressures on the torsional fatigue strength of an alloy steel, Proc. Int. Conf. on Fatigue of Metals, vol.138, pp.12-12, 1956.

K. Dang-van, Macro-micro approach in high-cycle multiaxial fatigue, Advances in multiaxial fatigue, 1993.

K. Dang-van, Introduction to fatigue analysis in mechanical design by the multiscale approach, High-Cycle Metal Fatigue, pp.57-88, 1999.
URL : https://hal.archives-ouvertes.fr/hal-00112495

K. Dang-van and B. Griveau, On a new multiaxial fatigue limit criterion: Theory and application. biaxial and multiaxial fatigue, pp.479-496, 1988.

K. Dang-van and M. H. Maitournam, On a new methodology for quantitative modeling of fretting fatigue. In Fretting fatigue: current technology and practices, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00112274

B. C. Jong, Analytical and experimental analysis of the capacity of steel wire ropes subjected to forced bending, 2015.

L. De-lorenzis, P. Wriggers, and G. Zavarise, A mortar formulation for 3D large deformation contact using NURBS-based isogeometric analysis and the augmented Lagrangian method, Computational Mechanics, vol.49, issue.1, pp.1-20, 2012.

H. Desimone, A. Bernasconi, and S. Beretta, On the application of Dang Van criterion to rolling contact fatigue, Wear, vol.260, issue.4-5, pp.567-572, 2006.

, Det Norske Veritas. Position moorings. Offshore Standard DNV-OS-E301, 2010.

. Det-norske and . Veritas, Design of floating wind turbine structures, Offshore Standard DNV-OS-J103, 2013.

. Det-norske and . Veritas, Design of offshore wind turbine structures. Offshore Standard DNV-OS-J101, 2014.

. Det-norske and . Veritas, Classification of mooring systems for permanent and mobile offshore units, 2015.

D. Doyen, A. Ern, and S. Piperno, Time-integration schemes for the finite element dynamic Signorini problem, SIAM Journal on Scientific Computing, vol.33, issue.1, pp.223-249, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00440128

T. X. Duong, L. D. Lorenzis, and R. A. Sauer, A segmentation-free isogeometric extended mortar contact method, Computational Mechanics, vol.63, issue.2, pp.383-407, 2019.

D. Durville, Contact-friction modeling within elastic beam assemblies: an application to knot tightening, Computational Mechanics, vol.49, issue.6, pp.687-707, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00673989

D. Durville and P. Davies, Simulation du passage de câbles tressés synthétiques sur une poulie, CSMA 2013-11e Colloque National en Calcul des Structures, 2013.

C. Eck, J. Jarusek, and M. Krbec, Unilateral contact problems: variational methods and existence theorems, vol.270, 2005.

J. Engerand, Mécanique de la rupture, 1990.

J. Esnault, V. Doquet, and P. Massin, A three-dimensional analysis of fatigue crack paths in thin metallic sheets, International Journal of Fatigue, vol.62, pp.119-132, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01302566

A. Fatemi and D. F. Socie, A critical plane approach to multiaxial fatigue damage including out-of-phase loading, Fatigue & Fracture of Engineering Materials & Structures, vol.11, issue.3, pp.149-165, 1988.

C. A. Felippa and B. Haugen, A unified formulation of small-strain corotational finite elements: I. Theory, Computer Methods in Applied Mechanics and Engineering, vol.194, pp.2285-2335, 2005.

K. A. Fischer and P. Wriggers, Mortar based frictional contact formulation for higher order interpolations using the moving friction cone, Computer methods in applied mechanics and engineering, vol.195, pp.5020-5036, 2006.

E. Fontaine, J. Heurtier, D. Durville, S. Toumit, and C. Prat, Modeling of riser contactfriction problems, Offshore Technology Conference. Offshore Technology Conference, 2002.

E. Fontaine, A. Kilner, C. Carra, D. Washington, K. Ma et al., Industry survey of past failures, pre-emptive replacements and reported degradations for mooring systems of floating production units, Offshore Technology Conference. Offshore Technology Conference, 2014.

S. Fouvry, K. Elleuch, and G. Simeon, Prediction of crack nucleation under partial slip fretting conditions, The Journal of Strain Analysis for Engineering Design, vol.37, issue.6, pp.549-564, 2002.

Z. Gao, Stochastic response analysis of mooring systems with emphasis on frequencydomain analysis of fatigue due to wide-band response processes. Fakultet for ingeniørvitenskap og teknologi, 2008.

S. Ghosh and D. Roy, A frame-invariant scheme for the geometrically exact beam using rotation vector parametrization, Computational Mechanics, vol.44, issue.1, p.103, 2009.

M. Giglio and A. Manes, Bending fatigue tests on a metallic wire rope for aircraft rescue hoists, Engineering Failure Analysis, vol.10, issue.2, pp.223-235, 2003.

J. Greenwood, Formulas for moderately elliptical hertzian contacts, ASME J. Tribol, vol.107, issue.4, pp.501-504, 1985.

P. Guidault, M. Poss, and F. Louf, Modélisation avancée des interfaces mécaniques -mécanique des contacts conformes et non conformes, 2014.

F. Guillemin, D. Di-domenico, G. Sabiron, and D. Averbuch, Using LIDAR based control to reduce loads on floating wind turbines and boost performance, Offshore Technology Conference. Offshore Technology Conference, 2016.

M. Hahn and P. Gilman, Offshore wind market and economic analysis, pp.1-191, 2013.

M. T. Hall, Mooring line modelling and design optimization of floating offshore wind turbines, 2013.

Q. He and A. Curnier, Anisotropic dry friction between two orthotropic surfaces undergoing large displacements, European Journal of Mechanics-A/Solids, vol.12, pp.631-666, 1993.

H. Hertz, On the contact of elastic solids, J. reine angew. Math, vol.92, p.1881

M. Hjiaj, G. De-saxcé, and Z. Mróz, A variational inequality-based formulation of the frictional contact law with a non-associated sliding rule, European Journal of Mechanics-A/Solids, vol.21, issue.1, pp.49-59, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00140254

R. Hobbs and K. Ghavani, The fatigue of structural wire strands, International Journal of Fatigue, vol.4, issue.2, pp.69-72, 1982.

R. Hobbs and M. Raoof, Interwire slippage and fatigue prediction in stranded cables for TLP tethers, pp.77-99, 1983.

R. Hobbs and M. Raoof, Mechanism of fretting fatigue in steel cables, International journal of fatigue, vol.16, issue.4, pp.273-280, 1994.

R. Hobbs and B. Smith, Fatigue performance of socketed terminations to structural strands, Proceedings of the Institution of Civil Engineers, vol.75, pp.35-48, 1983.

K. Hong, A. Der-kiureghian, and J. L. Sackman, Bending behavior of helically wrapped cables, Journal of engineering mechanics, vol.131, issue.5, pp.500-511, 2005.

J. Houle-paradis, Modélisation de la flexion libre d'un câble multicouche tenant compte de l'élasticité des contacts, 2011.

X. Huang and O. Vinogradov, Analysis of dry friction hysteresis in a cable under uniform bending, Structural Engineering and Mechanics, vol.2, issue.1, pp.63-80, 1994.

X. Huang and O. G. Vinogradov, Extension of a cable in the presence of dry friction, Structural Engineering and Mechanics, vol.4, issue.3, pp.313-329, 1996.

P. Hurricks, The mechanism of fretting -a review, Wear, vol.15, issue.6, pp.389-409, 1970.

, International Electrotechnical Commission et al. Wind turbines: Part 3: Design requirements for offshore wind turbines, 2009.

J. Fargues, Modélisation dynamique des risers pétroliers en grands déplacements, 1995.

K. Johnson, The effect of a tangential contact force upon the rolling motion of an elastic sphere on a plane, Journal of Applied Mechanics, vol.80, issue.9, pp.339-346, 1958.

K. Johnson, The application of shakedown principles in rolling and sliding contact, Eur. J. Mech. A/Solids, vol.11, p.188, 1992.

K. Johnson, J. Greenwood, and J. Higginson, The contact of elastic regular wavy surfaces, International journal of mechanical sciences, vol.27, issue.6, pp.383-396, 1985.

C. Jolicoeur and A. Cardou, Semicontinuous mathematical model for bending of multilayered wire strands, Journal of engineering Mechanics, vol.122, issue.7, pp.643-650, 1996.

J. Jonkman, S. Butterfield, W. Musial, and G. Scott, Definition of a 5-MW reference wind turbine for offshore system development, 2009.

R. Judge, Z. Yang, S. Jones, and G. Beattie, Full 3D finite element modelling of spiral strand cables, Construction and Building Materials, vol.35, pp.452-459, 2012.

A. Kapoor, Geometry changes and crack initiation in rolling and sliding contact, 1987.

A. Kilner, D. Washington, C. Carra, and A. Potts, Improvements in the practices for mooring integrity management, OTC Brasil. Offshore Technology Conference, 2015.

H. Kim and M. Kim, Comparison of simulated platform dynamics in steady/dynamic winds and irregular waves for oc4 semi-submersible 5mw wind-turbine against deepcwind model-test results, Ocean Syst. Eng, vol.6, issue.1, pp.1-21, 2016.

S. Kmet, E. Stanova, G. Fedorko, M. Fabian, and J. Brodniansky, Experimental investigation and finite element analysis of a four-layered spiral strand bent over a curved support, Engineering Structures, vol.57, pp.475-483, 2013.

R. Knapp, Derivation of a new stiffness matrix for helically armoured cables considering tension and torsion, International Journal for Numerical Methods in Engineering, vol.14, issue.4, pp.515-529, 1979.

R. Knapp and E. Chiu, Tension fatigue model for helically armored cables, Journal of energy resources technology, vol.110, issue.1, pp.12-18, 1988.

W. Koiter, General theorems of elasto-plastic solids. Progress in Solid Mechanics, Sneddon and R. Hill, 1960.

A. Konyukhov and K. Schweizerhof, Geometrically exact covariant approach for contact between curves, Computer Methods in Applied Mechanics and Engineering, vol.199, pp.2510-2531, 2010.

S. Lalonde, R. Guilbault, and S. Langlois, Modeling multilayered wire strands, a strategy based on 3D finite element beam-to-beam contacts -Part II: Application to wind-induced vibration and fatigue analysis of overhead conductors, International Journal of Mechanical Sciences, vol.126, pp.297-307, 2017.

S. Lalonde, R. Guilbault, and F. Légeron, Modeling multilayered wire strands, a strategy based on 3D finite element beam-to-beam contacts -Part I: Model formulation and validation, International Journal of Mechanical Sciences, vol.126, pp.281-296, 2017.

J. Lanteigne, Theoretical estimation of the response of helically armored cables to tension, torsion, and bending, ASME J. Appl. Mech, vol.52, issue.2, pp.423-432, 1985.

T. A. Laursen, Emerging spatial and temporal discretization methods in contact and impact mechanics, Computational Contact Mechanics, pp.1-37, 2007.

J. Lemaitre and J. Chaboche, Mechanics of solid mechanics, pp.161-241, 1990.

J. Leroy and P. Estrier, Calculation of stresses and slips in helical layers of dynamically bent flexible pipes, Oil & Gas Science and Technology, vol.56, issue.6, pp.545-554, 2001.
URL : https://hal.archives-ouvertes.fr/hal-02053964

F. Lévesque, S. Goudreau, S. Langlois, and F. Légeron, Experimental study of dynamic bending stiffness of ACSR overhead conductors, IEEE Transactions on Power Delivery, vol.30, issue.5, pp.2252-2259, 2015.

P. Litewka and P. Wriggers, Contact between 3D beams with rectangular cross-sections, International Journal for Numerical Methods in Engineering, vol.53, issue.9, pp.2019-2041, 2002.

P. Litewka and P. Wriggers, Frictional contact between 3D beams, Computational mechanics, vol.28, issue.1, pp.26-39, 2002.

D. Haines and E. Ollerton, Contact stress distributions on elliptical contact surfaces subjected to radial and tangential forces, Proceedings of the Institution of Mechanical Engineers, vol.177, issue.1, pp.95-114, 1963.

J. Mandel, Adaptation d'une structure plastique ecrouissable et approximations. Mechanics Research Communications, vol.3, pp.483-488, 1976.

N. Maouche, Modélisation des phénomènes d'endommagements dus aux contactsà faible amplitude de débattement, 1997.

P. Massin and A. Martin, Influence du statut des points d'intégration sur les algorithmes de contact-frottement, CSMA 2013-11e Colloque National en Calcul des Structures, 2013.

I. Mccoll, J. Ding, and S. Leen, Finite element simulation and experimental validation of fretting wear, Wear, vol.256, pp.1114-1127, 2004.

E. Melan, Theorie statisch unbestimmter systeme aus ideal-plastichem baustoff, vol.2, p.195, 1936.

R. Merhej, Impact de la taille du contact sur le comportement tribologique du contact 100Cr6/100Cr soumisà des sollicitations de fretting, 2008.

B. Molin, Hydrodynamique des structures offshore. Editions Technip, 2002.
URL : https://hal.archives-ouvertes.fr/hal-01320917

Z. Mroz and S. Stupkiewicz, Constitutive modeling of slip and wear in elastic frictional contact, Contact Mechanics, pp.237-260, 1992.

Z. Mróz and S. Stupkiewicz, An anisotropic friction and wear model, International journal of solids and structures, vol.31, issue.8, pp.1113-1131, 1994.

Y. Mutoh, Mechanisms of fretting fatigue, JSME international journal. Ser. A, Mechanics and material engineering, vol.38, issue.4, pp.405-415, 1995.

A. G. Neto, P. M. Pimenta, and P. Wriggers, A master-surface to master-surface formulation for beam to beam contact. Part I: frictionless interaction, Computer Methods in Applied Mechanics and Engineering, vol.303, pp.400-429, 2016.

A. G. Neto, P. M. Pimenta, and P. Wriggers, A master-surface to master-surface formulation for beam to beam contact. Part II: Frictional interaction, Computer Methods in Applied Mechanics and Engineering, vol.319, pp.146-174, 2017.

N. M. Newmark, A method of computation for structural dynamics, 1959.

, Floating production system -JIP-FPS mooring integrity, Research Report, vol.444, 2006.

O. Steinkjer, N. Soødahl, and G. Grytoøyr, Methodology for time domain fatigue life assessment of risers and umbilicals, ASME 2010 29th International Conference on Ocean, 2010.

J. Out and B. Von-morgen, Slippage of helical reinforcing on a bent cylinder. Engineering Structures, vol.19, pp.507-515, 1997.

A. Pantaleo, A. Pellerano, F. Ruggiero, and M. Trovato, Feasibility study of offshore wind farms: an application to Puglia region, Solar Energy, vol.79, issue.3, pp.321-331, 2005.

P. Papadopoulos, R. E. Jones, and J. M. Solberg, A novel finite element formulation for frictionless contact problems, International Journal for Numerical Methods in Engineering, vol.38, issue.15, pp.2603-2617, 1995.

K. O. Papailiou, Bending of helically twisted cables under variable bending stiffness due to internal friction, tensile force and cable curvature. Doctor of Technical Sciences thesis, 1995.

J. H. Paradis and F. Légeron, Modelling of the free bending behavior of a multilayer cable taking into account the tangential compliance of contact interfaces, Ninth International Symposium on Cable Dynamics, pp.18-20, 2011.

V. Perier and ;. Lyon, Etude de l'influence des conditions environnementales sur le comportement en fretting, fatigue et fretting-fatigue des câbles du génie civil, 2010.

V. Périer, L. Dieng, L. Gaillet, and S. Fouvry, Influence of an aqueous environment on the fretting behaviour of steel wires used in civil engineering cables, Wear, vol.271, issue.9, pp.1585-1593, 2011.

V. Périer, L. Gaillet, and L. Dieng, Effet de l'environnement sur la propagation de fissures dans les fils de câbles douvrages dart, 31èmes Journées de Printemps de la Société Française de Métallurgie et des Matériaux, p.449, 2012.

Y. Poirette, T. Perdrizet, J. C. Gilloteaux, A. Pourtier, and C. Mabile, A new ballasted floating support for offshore wind turbine, ASME 2014 33rd International Conference on Ocean, 2014.

M. Prados-privado, J. C. Prados-frutos, Á. Manchón, R. Rojo, P. Felice et al., Dental implants fatigue as a possible failure of implantologic treatment: the importance of randomness in fatigue behaviour, BioMed research international, 2015.

M. A. Puso and T. A. Laursen, A mortar segment-to-segment contact method for large deformation solid mechanics, Computer methods in applied mechanics and engineering, vol.193, issue.6-8, pp.601-629, 2004.

M. A. Puso and T. A. Laursen, A mortar segment-to-segment frictional contact method for large deformations, Computer methods in applied mechanics and engineering, vol.193, pp.4891-4913, 2004.

M. Raoof, Free bending tests on large spiral strands, Proceedings of the Institution of Civil Engineers, vol.87, issue.4, pp.605-626, 1989.

M. Raoof, Effect of hydrostatic pressure on strand behaviour, The Journal of Strain Analysis for Engineering Design, vol.25, issue.2, pp.75-84, 1990.

M. Raoof, Free bending fatigue of axially pre-loaded spiral strands, The Journal of Strain Analysis for Engineering Design, vol.27, issue.3, pp.127-136, 1992.

M. Raoof, Design of sheathed spiral strands against free bending fatigue at terminations, The Journal of Strain Analysis for Engineering Design, vol.28, issue.3, pp.163-174, 1993.

M. Raoof and T. J. Davies, The riddle of free-bending fatigue at end terminations to spiral strands, Journal of Constructional Steel Research, vol.95, pp.256-262, 2014.

M. Raoof and R. Hobbs, Torsion tests on large spiral strands, The Journal of Strain Analysis for Engineering Design, vol.23, issue.2, pp.97-104, 1988.

M. Raoof and R. E. Hobbs, Analysis of multilayered structural strands, Journal of engineering Mechanics, vol.114, issue.7, pp.1166-1182, 1988.

M. Raoof and Y. Huang, Wire stress calculations in helical strands undergoing bending, Journal of Offshore Mechanics and Arctic Engineering, vol.114, issue.3, pp.212-219, 1992.

C. B. Rawlins, Flexural self-damping in overhead electrical transmission conductors, Journal of Sound and Vibration, vol.323, issue.1-2, pp.232-256, 2009.

J. Redford, H. Lieurade, M. Gueguin, F. Hafid, C. Yang et al., Modélisation numerique du phenomène de fretting-fatigue intervenant dans le viellissement des conducteurs de lignes aeriennes, Materiaux & Techinques, vol.106, issue.3, p.308, 2018.

I. Ridge, Torsional characterization of ropes used offshore, The Journal of Strain Analysis for Engineering Design, vol.43, issue.2, pp.121-139, 2008.

I. Ridge, Tension-torsion fatigue behaviour of wire ropes in offshore moorings, Ocean Engineering, vol.36, issue.9, pp.650-660, 2009.

A. Robertson, J. Jonkman, M. Masciola, H. Song, A. Goupee et al., Definition of the semisubmersible floating system for phase ii of oc4, 2014.

C. Ruiz, P. Boddington, and K. Chen, An investigation of fatigue and fretting in a dovetail joint, Experimental mechanics, vol.24, issue.3, pp.208-217, 1984.

A. Sackfield and D. Hills, Some useful results in the tangentially loaded hertzian contact problem, The Journal of Strain Analysis for Engineering Design, vol.18, issue.2, pp.107-110, 1983.

S. Saevik, A finite element model for predicting stresses and slip in flexible pipe armouring tendons, Computers & structures, vol.46, issue.2, pp.219-230, 1993.

R. A. Sauer and L. De-lorenzis, An unbiased computational contact formulation for 3D friction, International Journal for Numerical Methods in Engineering, vol.101, issue.4, pp.251-280, 2015.

W. Schütz, A history of fatigue, Engineering fracture mechanics, vol.54, issue.2, pp.263-300, 1996.

M. Siavelis, M. L. Guiton, P. Massin, and N. Moës, Large sliding contact along branched discontinuities with X-FEM, Computational mechanics, vol.52, issue.1, pp.201-219, 2013.

D. Siegert, Mécanismes de fatigue de contact dans les câbles de haubanage du Génie Civil, 1997.

G. Sigurdsson, Probabilistic fatigue of offshore structures, Reliability and Optimization of Structural Systems, vol.88, pp.291-309, 1989.

J. Simo, The (symmetric) hessian for geometrically nonlinear models in solid mechanics: Intrinsic definition and geometric interpretation, Computer Methods in Applied Mechanics and Engineering, vol.96, issue.2, pp.189-200, 1992.

J. C. Simo and R. L. Taylor, Consistent tangent operators for rate-independent elastoplasticity, Computer methods in applied mechanics and engineering, vol.48, issue.1, pp.101-118, 1985.

G. Sines, Failure of materials under combined repeated stresses with superimposed static stresses, 1955.

R. Smallwood, Fretting fatigue of steel roping wire in seawater, 1988.

K. Smith, T. Topper, and P. Watson, A stress-strain function for the fatigue of metals (stress-strain function for metal fatigue including mean stress effect), J Materials, vol.5, pp.767-778, 1970.

E. Stanova, G. Fedorko, M. Fabian, and S. Kmet, Computer modelling of wire strands and ropes -Part II: Finite element-based applications, Advances in Engineering Software, vol.42, issue.6, pp.322-331, 2011.

G. M. Stewart, A. Robertson, J. Jonkman, and M. A. Lackner, The creation of a comprehensive metocean data set for offshore wind turbine simulations, Wind Energy, vol.19, issue.6, pp.1151-1159, 2016.

N. P. Suh, The delamination theory of wear, Wear, vol.25, issue.1, pp.111-124, 1973.

N. P. Suh, An overview of the delamination theory of wear, Wear, vol.44, issue.1, pp.1-16, 1977.

M. P. Szolwinski and T. N. Farris, Mechanics of fretting fatigue crack formation, Wear, vol.198, issue.1-2, pp.93-107, 1996.

H. R. Thomas and V. A. Hoersch, Stresses due to the pressure of one elastic solid upon another with special reference to railroad rails: a report, 1930.

G. Tilly, Performance of bridge cables, First Oleg Kerensky Memorial Conference, 1988.

H. Usabiaga and J. Pagalday, Analytical procedure for modelling recursively and wire by wire stranded ropes subjected to traction and torsion loads, International Journal of Solids and Structures, vol.45, issue.21, pp.5503-5520, 2008.

W. Utting and N. Jones, The response of wire rope strands to axial tensile loads -Part I. Experimental results and theoretical predictions, International journal of mechanical sciences, vol.29, issue.9, pp.605-619, 1987.

P. S. Van-lieshout, J. H. Den-besten, and M. L. Kaminski, Validation of the corrected Dang Van multiaxial fatigue criterion applied to turret bearings of FPSO offloading buoys, Ships and Offshore Structures, vol.12, issue.4, pp.521-529, 2017.

A. Vannes, J. Chicois, and R. Fougeres, Restauration des contraintes résiduelles induites parécrouissage, en fonction de la température de chauffage et du temps de maintien, Mémoires Scientifiques, Métallurgie, vol.70, p.4, 1973.

P. Vermeulen and K. Johnson, Contact of nonspherical elastic bodies transmitting tangential forces, Journal of Applied Mechanics, vol.31, p.338, 1964.

L. Vincent, Y. Berthier, and M. Godet, Testing methods in fretting fatigue: a critical appraisal. In Standardization of fretting fatigue test methods and equipment, 1992.

O. Vingsbo and S. Söderberg, On fretting maps, Wear, vol.126, issue.2, pp.131-147, 1988.

D. Wang, D. Zhang, and S. Ge, Fretting-fatigue behavior of steel wires in low cycle fatigue, Materials & Design, vol.32, issue.10, pp.4986-4993, 2011.

J. A. Williams and R. S. Dwyer-joyce, Contact between solid surfaces, Modern tribology handbook, vol.1, pp.121-162, 2001.

J. Witz and Z. Tan, On the flexural structural behaviour of flexible pipes, umbilicals and marine cables. Marine structures, vol.5, pp.229-249, 1992.

A. Wöhler, Über die festigkeitsversuche mit eisen und stahl, p.1870

S. Wong, A. Kapoor, and J. Williams, Shakedown limits on coated and engineered surfaces, Wear, vol.203, pp.162-170, 1997.

P. Wriggers and T. A. Laursen, Computational contact mechanics, vol.2, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00466790

P. Wriggers and G. Zavarise, On contact between three-dimensional beams undergoing large deflections, International Journal for Numerical Methods in Biomedical Engineering, vol.13, issue.6, pp.429-438, 1997.

L. Xiang, H. Wang, Y. Chen, Y. Guan, Y. Wang et al., Modeling of multi-strand wire ropes subjected to axial tension and torsion loads, International Journal of Solids and Structures, vol.58, pp.233-246, 2015.

V. Yastrebov, Computational contact mechanics: geometry, detection and numerical techniques
URL : https://hal.archives-ouvertes.fr/pastel-00657305

G. Zavarise and P. Wriggers, Contact with friction between beams in 3-D space, International Journal for Numerical Methods in Engineering, vol.49, issue.8, pp.977-1006, 2000.

D. Zhang, S. Ge, and Y. Qiang, Research on the fatigue and fracture behavior due to the fretting wear of steel wire in hoisting rope, Wear, vol.255, issue.7-12, pp.1233-1237, 2003.

D. Zhang and M. Ostoja-starzewski, Finite element solutions to the bending stiffness of a single-layered helically wound cable with internal friction, Journal of Applied Mechanics, vol.83, issue.3, p.31003, 2016.