A. Baraston, L. Gerbaud, V. Reinbold, T. Boussey, and F. Wurtz, «Multiphysical approach including equivalent circuit models for the sizing by optimization», COMPEL, vol.35, pp.871-884, 2016.

M. Bendali, C. Larouci, T. Azib, C. Marchand, and G. Coquery, « Design with Optimization of an Interleaved Buck Converter for Automotive Application, 7th IET International Conference on Power Electronics, Machines and Drives, 2014.

C. Cuellar and N. , Idir, « EMI filter design methodology taking into account the static converter impedance, 16th European Conference on Power Electronics and Applications, 2014.

T. D. Oliveira, Optimisation du routage d'un filtre CEM, 2012.
URL : https://hal.archives-ouvertes.fr/tel-00739424

J. Delaballe, C. La, ». La-compatibilité-Électromagnétique, and S. Electric, Cahier Technique n°149, 2001.

M. Delhommais, G. Dadanema, Y. Avenas, F. Costa, J. L. Schanen et al., « Design by optimization of power electronics converter including EMC constraints, International Symposium on Electromagnetic Compatibility -EMC EUROPE, pp.182-187, 2014.

L. Gerbaud, « Modelling Process and Optimisation of EMC Filters for Power electronics Applications, vol.31, pp.747-763, 2012.

A. Groud, «Contribution à l'analyse des systèmes électrotechniques complexes : Méthodes et outils appliqués à l'étude des harmoniques», 1997.

M. Hartmann and . Ultra, Compact and Ultra-Efficient Three-Phase PWM Rectifier Systems for More Electric Aircraft, 2011.

L. Jourdan, J. Schanen, J. Roudet, M. Bensaied, and K. Segueni, Design methodology for non insulated DC-DC converter: application to 42V-14V "Powernet" », 2002 IEEE 33rd Annual IEEE Power Electronics Specialists Conference, vol.4, pp.1679-1684, 2002.

J. Kotny, T. Duquesne, and N. Idir, « Influence of the common mode impedance paths on the design of the EMI filters used with SiC-buck converter, Advanced Electromagnetics, vol.4, p.2, 2015.

J. Kotny, T. Duquesne, and N. Idir, « Influence of the common mode impedance paths on the design of the EMI filters used with SiC-buck converter, Advanced Electromagnetics, vol.4, p.2, 2015.

D. Mueller, M. Beltle, and S. Tenbohlen, Automated Filter Optimization for High-Voltage Cable Harness Based on Circuit Simulations for Conducted Emissions Prediction, International Symposium on Electromagnetic Compatibility (EMC EUROPE), pp.84-89, 2018.

B. Touré, Modélisation Haute Fréquence des variateurs de vitesse pour Aéronefs : Contribution au Dimensionnement et à l'Optimisation de Filtres CEM, 2012.

B. , « Modélisation et optimisation des performances CEM d'une association variateur de vitesse-machine asynchrone, 2003.

D. Saber, B. Labrousse, A. Revol, and . Gascher, Application to a non-isolated on-board single-phase charger for electric vehicles, A Combined CM & DM Conducted EMI Modeling Approach, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01686521

X. Zhang, « Passive Component Weight Reduction for Three Phase Power Converters, 2013.

, Ce phénomène n'apparait pas à chaque fois qu'un nouveau multiple de la

, En revanche, il n'a pas lieu à 25 kHz (6 x 25 = 150) ni à 38 kHz (4 x 38 = 152), par exemple. Cela s'explique par le fait que les harmoniques sont moins importantes autour du

, e et du 6 e multiple de la fréquence de découpage, dans nos spectres CEM. Ces constatations ont été faites pour tous nos spectres CEM. Nous pouvons l'observer sur les

, Ce phénomène de marches est bien connu et a déjà été observé sur un système moins complexe

, Validation de la « meilleure » solution

, Nous avons validé ses spectres CEM en simulation temporelle. Nous montrons ces spectres sur la figure 4.16. Références de la conclusion générale, High Frequency Model of Ferrite and Nanocrystalline Ring Core Inductors », 17th European Conference on Power Electronics and Applications (EPE'15 ECCE-Europe), pp.1-8, 2015.

C. Cuellar and N. Idir, « Stray capacitances determination methods of EMI filter inductors, IECON 2017 -43rd Annual Conference of the IEEE Industrial Electronics Society, pp.7040-7045, 2017.

M. Delhommais, G. Dadanema, Y. Avenas, F. Costa, J. L. Schanen et al., « Design by optimization of power electronics converter including EMC constraints, International Symposium on Electromagnetic Compatibility -EMC EUROPE, pp.182-187, 2016.

V. Santos, N. Roux, B. Revol, B. Sareni, B. Cougo et al., Unshielded Cable Modeling for Conducted Emissions, Issues in Electrical Power Drive Systems, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01656080

G. Dadanema, M. Delhommais, F. Costa, J. Schanen, Y. Avenas et al., « Analytical model for SiC based power converter optimization including EMC and thermal constraints, 2017.

M. L. Heldwein, L. Dalessandro, and J. W. Kolar, « The Three-Phase Common-Mode Inductor: Modeling and Design Issues, IEEE Transactions on Industrial Electronics, vol.58, issue.8, pp.3264-3274, 2011.

C. Jettanasen, « Modélisation par approche quadripolaire des courants de mode commun dans les associations convertisseursmachines en aéronautique, 2008.

D. Labrousse, B. Revol, and F. Costa, « Switching cell EMC behavioral modeling by transfer function, pp.603-606, 2011.

C. Marot, J. Rivenc, F. Flourens, and F. Therond, MECEP ProjectMastering Conducted Emissions on Power Equipment, 2015.

D. Neascu, « Space Vector Modulation -An introduction, Tutorial at IECON2001, 2001.

B. , « Modélisation et optimisation des performances CEM d'une association variateur de vitesse-machine asynchrone, 2003.

B. Revol, J. Roudet, J. L. Schanen, and P. Loizelet, « EMI study of a three phase inverter-Fed Motor Drives, IEEE transaction on IAS, vol.47, pp.223-231, 2011.

B. Touré, Modélisation Haute Fréquence des variateurs de vitesse pour Aéronefs : Contribution au Dimensionnement et à l'Optimisation de Filtres CEM, 2012.

B. Zaidi, « Méthode d'optimisation du volume des bobines de mode commun pour la conception des filtres CEM, 2018.