C. Wagner and G. M. Hänsch, Mechanisms of Bacterial Colonization of Implants and Host Response, A Modern Approach to Biofilm-Related Orthopaedic Implant Infections

C. Springer, Advances in Experimental Medicine and Biology, pp.15-27, 2016.

C. R. Arciola, D. Campoccia, and L. Montanaro, Implant infections: adhesion, biofilm formation and immune evasion, Nat Rev Microbiol, vol.16, issue.7, pp.397-409, 2018.

C. L. Romanò, D. Romanò, I. Morelli, and L. Drago, The Concept of Biofilm-Related Implant Malfunction and "Low-Grade Infection, A Modern Approach to Biofilm-Related Orthopaedic Implant Infections

C. Springer, Advances in Experimental Medicine and Biology, pp.1-13, 2016.

J. S. Vanepps and J. G. Younger, Implantable Device Related Infection. Shock Augusta Ga, vol.46, pp.597-608, 2016.

A. K. Deva, W. P. Adams, and K. Vickery, The role of bacterial biofilms in device-associated infection, Plast Reconstr Surg, vol.132, issue.5, pp.1319-1347, 2013.

B. Foxman, Epidemiology of urinary tract infections: incidence, morbidity, and economic costs, Am J Med, vol.113, issue.1, pp.5-13, 2002.

L. Vallejo-torres, M. Pujol, E. Shaw, I. Wiegand, J. M. Vigo et al., Cost of hospitalised patients due to complicated urinary tract infections: a retrospective observational study in countries with high prevalence of multidrug-resistant Gram-negative bacteria: the COMBACTE-MAGNET, RESCUING study, BMJ Open, vol.8, issue.4, 2018.

A. Bhattacharjee, M. Khan, M. Kleiman, and A. I. Hochbaum, Effects of Growth Surface Topography on Bacterial Signaling in Coculture Biofilms, ACS Appl Mater Interfaces, vol.9, issue.22, pp.18531-18540, 2017.

Y. Chang, E. R. Weeks, and W. A. Ducker, Surface Topography Hinders Bacterial Surface Motility, ACS Appl Mater Interfaces, vol.10, issue.11, pp.9225-9259, 2018.

S. C. Cox, P. Jamshidi, N. M. Eisenstein, M. A. Webber, H. Burton et al., Surface Finish has a Critical Influence on Biofilm Formation and Mammalian Cell Attachment to Additively Manufactured Prosthetics, vol.3, pp.1616-1642, 2017.

M. Graham and N. Cady, Nano and Microscale Topographies for the Prevention of Bacterial Surface Fouling. Coatings, vol.4, pp.37-59, 2014.

C. Desrousseaux, V. Sautou, S. Descamps, and O. Traoré, Modification of the surfaces of medical devices to prevent microbial adhesion and biofilm formation, J Hosp Infect, vol.85, issue.2, pp.87-93, 2013.

P. Chennell, E. Feschet-chassot, T. Devers, K. O. Awitor, S. Descamps et al., In vitro evaluation of TiO2 nanotubes as cefuroxime carriers on orthopaedic implants for the prevention of periprosthetic joint infections, Int J Pharm, vol.455, issue.1-2, pp.298-305, 2013.

D. Losic, M. S. Aw, A. Santos, K. Gulati, and M. Bariana, Titania nanotube arrays for local drug delivery: recent advances and perspectives, Expert Opin Drug Deliv, vol.12, issue.1, pp.103-130, 2015.

Y. Yang, H. Ao, S. Yang, Y. Wang, W. Lin et al., In vivo evaluation of the anti-infection potential of gentamicin-loaded nanotubes on titania implants, Int J Nanomedicine, vol.11, pp.2223-2257, 2016.

M. Jarosz, J. Kapusta-ko?odziej, A. Pawlik, K. Syrek, and G. D. Sulka, Drug delivery systems based on titania nanostructures, Nanostructures for Drug Delivery, pp.299-326, 2017.

A. P. Jay and D. L. Nicol, The Pathophysiology of Upper Tract Obstruction, Ureteric Stenting

. Wiley-blackwell, , pp.16-28, 2017.

P. T. Zhao, D. A. Leavitt, P. Motamedinia, Z. Okeke, and A. D. Smith, Etiology of Ureteric Obstruction, Ureteric Stenting

. Wiley-blackwell, , pp.48-54, 2017.

S. Doizi and M. S. Pearle, Emergency Management of Ureteric Obstruction, Ureteric Stenting

. Wiley-blackwell, , pp.67-74, 2017.

J. Kamei and Y. Homma, What Are the Predictive Factors of Severe Conditions in Acute Obstructive Pyelonephritis? Urogenit Tract Infect, vol.11, pp.12-18, 2016.

L. Hsu, H. Li, D. Pucheril, M. Hansen, R. Littleton et al., Use of percutaneous nephrostomy and ureteral stenting in management of ureteral obstruction, World J Nephrol, vol.5, issue.2, p.172, 2016.

H. Chang, S. Tang, F. Chuang, S. Wu, G. Sun et al., Comparison between the use of percutaneous nephrostomy and internal ureteral stenting in the management of long-term ureteral obstructions, Urol Sci, vol.23, issue.3, pp.82-86, 2012.

P. Mucksavage and . Stents, In: Clinical Application of Urologic Catheters, Devices and Products, Nephrostomy Tubes, and Urethral Dilators, pp.105-137, 2009.

. Parlement-européen, Règlement (UE) 2017/745 relatif aux dispositifs médicaux, modifiant la directive 2001/83/CE, le règlement (CE) 178/2002 et le règlement (CE) 1223/2009 et abrogeant les directives du Conseil 90/385/CEE et, p.175

H. Alenezi and J. D. Denstedt, The History and Evolution of Ureteral Stents, Ureteric Stenting

. Wiley-blackwell, , pp.75-82, 2017.

H. K. Mardis, R. M. Kroeger, J. J. Morton, and J. M. Donovan, Comparative Evaluation of Materials Used for Internal Ureteral Stents, J Endourol, vol.7, issue.2, pp.105-120, 1993.

E. Liatsikos, P. Kallidonis, I. Kyriazis, C. Constantinidis, K. Hendlin et al., Ureteral Obstruction: Is the Full Metallic Double-Pigtail Stent the Way to Go?, Eur Urol, vol.57, issue.3, pp.480-487, 2010.

P. Meria, Editorial Comment on: Ureteral Obstruction: Is the Full Metallic Double-Pigtail Stent the Way to Go?, Eur Urol, vol.57, issue.3, p.487, 2010.

C. M. Gridley and B. E. Knudsen, Physical Characteristics of Stents, Ureteric Stenting

. Wiley-blackwell, , pp.91-101, 2017.

A. M. Todd and B. E. Knudsen, Ureteral Stent Materials: Past, Present, and Future

U. K. Chichester, , p.2017, 2017.

, , pp.83-90, 2009.

H. B. Joshi, A. Stainthorpe, F. X. Keeley, R. Macdonagh, and A. G. Timoney, Indwelling ureteral stents: evaluation of quality of life to aid outcome analysis, J Endourol, vol.15, issue.2, pp.151-155, 2001.

J. E. Lingeman, G. M. Preminger, E. R. Goldfischer, and A. E. Krambeck, Assessing the Impact of Ureteral Stent Design on Patient Comfort, J Urol, vol.181, issue.6, pp.2581-2588, 2009.

M. Taguchi, K. Yoshida, M. Sugi, T. Matsuda, and H. Kinoshita, A ureteral stent crossing the bladder midline leads to worse urinary symptoms, Cent Eur J Urol, vol.70, issue.4, pp.412-419, 2017.

V. Mittal, M. Biswas, and S. Lal, Percutaneous nephrostomy or double J stenting, which is better modality for obstructive uropathy-a descriptive study, Int J Res Med Sci, vol.4, issue.8, pp.3486-91, 2017.

H. Jiang, D. Huang, S. Yao, and S. Liu, Improving Drainage After Percutaneous Nephrolithotomy Based on Health-Related Quality of Life: A Prospective Randomized Study, J Endourol, vol.31, issue.11, pp.1131-1139, 2017.

K. T. Lim, Y. T. Kim, T. Y. Lee, and S. Y. Park, Effects of Tamsulosin, Solifenacin, and Combination Therapy for the Treatment of Ureteral Stent Related Discomforts, Korean J Urol, vol.52, issue.7, p.485, 2011.

A. E. Dellis, F. X. Keeley, V. Manolas, and A. A. Skolarikos, Role of ?-blockers in the Treatment of Stentrelated Symptoms: A Prospective Randomized Control Study, Urology, vol.83, issue.1, pp.56-62, 2014.

A. E. Dellis, A. G. Papatsoris, F. X. Keeley, A. Bamias, C. Deliveliotis et al., Solifenacin, and Their Combination for the Treatment of Stent-Related Symptoms: A Randomized Controlled Study, J Endourol, vol.31, issue.1, pp.100-109, 2017.

A. Ringel, S. Richter, M. Shalev, and I. Nissenkorn, Late complications of ureteral stents, Eur Urol, vol.38, issue.1, pp.41-45, 2000.

P. Hao, W. Li, C. Song, J. Yan, B. Song et al., Clinical evaluation of double-pigtail stent in patients with upper urinary tract diseases: report of 2685 cases, J Endourol, vol.22, issue.1, pp.65-70, 2008.

R. Kulkarni, Stent Migration, Ureteric Stenting

. Wiley-blackwell, , pp.227-264, 2017.

M. M. Mansbridge, V. L. Tsing, E. R. Latif, and C. B. Tracey, Novel management of ureteral stent migration with mini-PCNL , Novel management of ureteral stent migration with mini-PCNL, J Clin Urol, 2018.

S. Lewis and U. Patel, Major complications after percutaneous nephrostomy-lessons from a department audit, Clin Radiol, vol.59, issue.2, pp.171-180, 2004.

B. A. Vanderbrink, A. R. Rastinehad, M. C. Ost, and A. D. Smith, Encrusted Urinary Stents: Evaluation and Endourologic Management, J Endourol, vol.22, issue.5, pp.905-917, 2008.

M. Kadihasanoglu, M. Kilciler, and O. Atahan, Luminal Obstruction of Double J Stents Due to Encrustation Depends on Indwelling Time: A Pilot Study, Aktuelle Urol, vol.48, issue.03, pp.248-51, 2017.

M. C. Sighinolfi, G. P. Sighinolfi, E. Galli, S. Micali, N. Ferrari et al., Chemical and Mineralogical Analysis of Ureteral Stent Encrustation and Associated Risk Factors, Urology, vol.86, issue.4, pp.703-709, 2015.

J. Chan and D. Lange, Encrustation of Indwelling Urinary Devices, Ureteric Stenting

. Wiley-blackwell, , pp.215-241, 2017.

G. Bonkat, M. Rieken, G. Müller, A. Roosen, F. P. Siegel et al., Microbial colonization and ureteral stent-associated storage lower urinary tract symptoms: the forgotten piece of the puzzle?, World J Urol, vol.31, issue.3, pp.541-547, 2013.

V. Praz, Y. Chollet, and P. Jichlinski, Indications et méthodes de dérivations urinaires minimales invasives en oncologie

. Revue-médicale-suisse, , 2007.

H. Knopf, H. Graff, and H. Schulze, Perioperative Antibiotic Prophylaxis in Ureteroscopic Stone Removal, Eur Urol, vol.44, issue.1, pp.115-123, 2003.

M. Grabe, Controversies in antibiotic prophylaxis in urology, Int J Antimicrob Agents, vol.23, issue.1, pp.17-23, 2004.

J. S. Wolf, C. J. Bennett, R. R. Dmochowski, B. K. Hollenbeck, M. S. Pearle et al., Best Practice Policy Statement on Urologic Surgery Antimicrobial Prophylaxis, J Urol, vol.179, issue.4, pp.1379-90, 2008.

J. S. Wolf, C. J. Bennett, R. R. Dmochowski, B. K. Hollenbeck, M. S. Pearle et al., Best Practice Policy Statement on Urologic Surgery Antimicrobial Prophylaxis, J Urol, vol.179, issue.4, pp.1379-90, 2008.

M. Mrkobrada, I. Ying, S. Mokrycke, G. Dresser, S. Elsayed et al., CUA Guidelines on antibiotic prophylaxis for urologic procedures, Can Urol Assoc J, vol.9, issue.1-2, pp.13-22, 2015.

G. Bonkat, R. Pickard, R. Bartoletti, T. Cai, F. Bruyère et al., , 2017.

O. Shoshany, D. Margel, C. Finz, O. Ben-yehuda, P. M. Livne et al., Percutaneous nephrolithotomy for infection stones: what is the risk for postoperative sepsis? A retrospective cohort study, Urolithiasis, vol.43, issue.3, pp.237-279, 2015.

T. Cai, P. Verze, A. Brugnolli, D. Tiscione, L. G. Luciani et al., Adherence to European Association of Urology Guidelines on Prophylactic Antibiotics: An Important Step in Antimicrobial Stewardship, Eur Urol, vol.69, issue.2, pp.276-83, 2016.

A. Lara-isla, J. Medina-polo, A. , M. Benítez-sala, R. Sopeña-sutil et al., Urinary Infections in Patients with Catheters in the Upper Urinary Tract: Microbiological Study, Urol Int, vol.98, issue.4, pp.442-450, 2017.

P. Tenke, B. Kovacs, M. Jäckel, and E. Nagy, The role of biofilm infection in urology, World J Urol, vol.24, issue.1, p.13, 2006.

P. Tenke, B. Köves, K. Nagy, S. J. Hultgren, W. Mendling et al., Update on biofilm infections in the urinary tract, World J Urol, vol.30, issue.1, pp.51-58, 2012.

F. Sun, F. Qu, Y. Ling, P. Mao, P. Xia et al., Biofilm-associated infections: antibiotic resistance and novel therapeutic strategies, Future Microbiol, vol.8, issue.7, pp.877-86, 2013.

O. Ciofu, E. Rojo-molinero, M. D. Macià, and A. Oliver, Antibiotic treatment of biofilm infections, APMIS, vol.125, issue.4, pp.304-323, 2017.

A. Harris, L. Pineles, and E. Perencevich, Recognising the value of infection prevention and its role in addressing the antimicrobial resistance crisis, BMJ Qual Saf, vol.26, issue.8, pp.683-689, 2017.

R. Marques, J. Gregório, F. Pinheiro, P. Póvoa, M. M. Da-silva et al., How can information systems provide support to nurses' hand hygiene performance? Using gamification and indoor location to improve hand hygiene awareness and reduce hospital infections, BMC Med Inform Decis Mak, vol.17, issue.1, p.15, 2017.

L. Mody, M. T. Greene, J. Meddings, S. L. Krein, S. E. Mcnamara et al., A National Implementation Project to Prevent Catheter-Associated Urinary Tract Infection in Nursing Home Residents, JAMA Intern Med, vol.177, issue.8, pp.1154-62, 2017.

D. Campoccia, L. Montanaro, and C. R. Arciola, A review of the biomaterials technologies for infectionresistant surfaces, Biomaterials, vol.34, issue.34, pp.8533-54, 2013.

L. Yang, S. Whiteside, P. A. Cadieux, and J. D. Denstedt, Ureteral stent technology: Drug-eluting stents and stent coatings, Asian J Urol, vol.2, issue.4, pp.194-201, 2015.

I. Francolini, C. Vuotto, A. Piozzi, and G. Donelli, Antifouling and antimicrobial biomaterials: an overview, APMIS, vol.125, issue.4, pp.392-417, 2017.

A. Jaggessar, H. Shahali, A. Mathew, and P. Yarlagadda, Bio-mimicking nano and micro-structured surface fabrication for antibacterial properties in medical implants, J Nanobiotechnology, vol.15, 2017.

X. J. Loh, Latest Advances in Antibacterial Materials, J Mol Eng Mater, vol.05, issue.01, p.1740001, 2017.

H. Koo, R. N. Allan, R. P. Howlin, P. Stoodley, and L. Hall-stoodley, Targeting microbial biofilms: current and prospective therapeutic strategies, Nat Rev Microbiol, vol.15, issue.12, pp.740-55, 2017.

G. Hughes and M. A. Webber, Novel approaches to the treatment of bacterial biofilm infections, Br J Pharmacol, vol.174, issue.14, pp.2237-2283, 2017.

A. Tripathy, P. Sen, B. Su, and W. H. Briscoe, Natural and bioinspired nanostructured bactericidal surfaces, Adv Colloid Interface Sci, vol.248, pp.85-104, 2017.

P. Singha, J. Locklin, and H. Handa, A review of the recent advances in antimicrobial coatings for urinary catheters, Acta Biomater, vol.50, pp.20-40, 2017.

K. Huang, Y. Huang, S. Chen, C. Lu, Y. Lin et al., Recent Advances in Antimicrobial Polymers: A Mini-Review. Int J Mol Sci, vol.17, issue.9, p.1578, 2016.

J. Lo, D. Lange, and B. H. Chew, Ureteral Stents and Foley Catheters-Associated Urinary Tract Infections: The Role of Coatings and Materials in Infection Prevention, Antibiotics, vol.3, issue.1, pp.87-97, 2014.

X. Ma, Y. Xiao, H. Xu, K. Lei, and M. Lang, Preparation, degradation and in vitro release of ciprofloxacineluting ureteral stents for potential antibacterial application, Mater Sci Eng C, vol.66, pp.92-101, 2016.

V. Kumar, G. Su, C. Velusamy, and P. , Surface immobilization of kanamycin-chitosan nanoparticles on polyurethane ureteral stents to prevent bacterial adhesion, Biofouling, vol.32, issue.8, pp.861-70, 2016.

C. E. Mendez-probst, L. W. Goneau, K. W. Macdonald, L. Nott, S. Seney et al., The use of triclosan eluting stents effectively reduces ureteral stent symptoms: a prospective randomized trial, BJU Int, vol.110, issue.5, pp.749-54, 2012.

R. Wang, K. G. Neoh, E. Kang, P. A. Tambyah, and E. Chiong, Antifouling coating with controllable and sustained silver release for long-term inhibition of infection and encrustation in urinary catheters: Anti-Infective and Anti-Encrustation Catheter Coating, J Biomed Mater Res B Appl Biomater, vol.103, issue.3, pp.519-547, 2015.

A. R. El-nahas, M. Lachine, E. Elsawy, A. Mosbah, and H. El-kappany, A randomized controlled trial comparing antimicrobial (silver sulfadiazine)-coated ureteral stents with non-coated stents, Scand J Urol, pp.1-5, 2017.

B. M. Rosman, J. Barbosa, C. P. Passerotti, M. Cendron, and H. T. Nguyen, Evaluation of a novel gelbased ureteral stent with biofilm-resistant characteristics, Int Urol Nephrol, vol.46, issue.6, pp.1053-1061, 2014.

H. Yuan, J. Xue, B. Qian, H. Chen, Y. Zhu et al., Preparation and antifouling property of polyurethane film modified by chondroitin sulfate, Appl Surf Sci, vol.394, pp.403-416, 2017.

H. Yuan, B. Qian, H. Chen, and M. Lan, The influence of conditioning film on antifouling properties of the polyurethane film modified by chondroitin sulfate in urine, Appl Surf Sci, vol.426, pp.587-96, 2017.

M. Gultekinoglu, T. Sarisozen, Y. Erdogdu, C. Sagiroglu, M. Aksoy et al., Designing of dynamic polyethyleneimine (PEI) brushes on polyurethane (PU) ureteral stents to prevent infections, Acta Biomater, vol.21, pp.44-54, 2015.

D. Sun, B. Shahzad, M. Li, M. Wang, G. Xu et al., Antimicrobial materials with medical applications. Mater Technol, 2014.

G. Hazell, L. E. Fisher, W. A. Murray, A. H. Nobbs, and B. Su, Bioinspired bactericidal surfaces with polymer nanocone arrays, J Colloid Interface Sci, vol.528, pp.389-99, 2018.

E. E. Mann, D. Manna, M. R. Mettetal, R. M. May, E. M. Dannemiller et al., Surface micropattern limits bacterial contamination, Antimicrob Resist Infect Control, vol.3, p.28, 2014.

B. Ercan, E. Taylor, E. Alpaslan, and T. J. Webster, Diameter of titanium nanotubes influences antibacterial efficacy, Nanotechnology, vol.22, p.295102, 2011.

J. K. Oh, N. Kohli, Y. Zhang, Y. Min, A. Jayaraman et al., Nanoporous aerogel as a bacteria repelling hygienic material for healthcare environment, Nanotechnology, vol.27, issue.8, p.85705, 2016.

L. Liu, B. Ercan, L. Sun, K. S. Ziemer, and T. J. Webster, Understanding the Role of Polymer Surface Nanoscale Topography on Inhibiting Bacteria Adhesion and Growth, ACS Biomater Sci Eng, vol.2, issue.1, pp.122-152, 2016.

L. C. Hsu, J. Fang, D. A. Borca-tasciuc, R. W. Worobo, and C. I. Moraru, Effect of Micro-and Nanoscale Topography on the Adhesion of Bacterial Cells to Solid Surfaces, Appl Env Microbiol, vol.79, issue.8, pp.2703-2715, 2013.

R. Helbig, D. Günther, J. Friedrichs, F. Rößler, A. Lasagni et al., The impact of structure dimensions on initial bacterial adhesion, Biomater Sci, vol.4, issue.7, pp.1074-1082, 2016.

P. Bhusal, J. Harrison, M. Sharma, D. S. Jones, A. G. Hill et al., Controlled release drug delivery systems to improve post-operative pharmacotherapy, Drug Deliv Transl Res, vol.6, issue.5, pp.441-51, 2016.

V. C. Anitha, J. Lee, J. Lee, N. Banerjee, A. et al., Biofilm formation on a TiO 2 nanotube with controlled pore diameter and surface wettability, Nanotechnology, vol.26, issue.6, p.65102, 2015.

M. Kulkarni, A. Mazare, E. Gongadze, . Perutkova-?, V. Kralj-igli? et al., Titanium nanostructures for biomedical applications, Nanotechnology, vol.26, issue.6, p.62002, 2015.

W. Feng, Z. Geng, Z. Li, Z. Cui, S. Zhu et al., Controlled release behaviour and antibacterial effects of antibiotic-loaded titania nanotubes, Mater Sci Eng C, vol.62, pp.105-117, 2016.

T. Tang, H. Ao, S. Yang, Y. Wang, W. Lin et al., In vivo evaluation of the anti-infection potential of gentamicin-loaded nanotubes on titania implants, Int J Nanomedicine, 2016.

J. Rouquerol, D. Avnir, C. W. Fairbridge, D. H. Everett, J. M. Haynes et al., Recommendations for the characterization of porous solids, Pure Appl Chem, vol.66, issue.8, pp.1739-1758, 1994.

L. C. Hwa, S. Rajoo, A. M. Noor, N. Ahmad, and M. B. Uday, Recent advances in 3D printing of porous ceramics: A review. Curr Opin Solid State Mater Sci, vol.21, pp.323-370, 2017.

G. Ye, Y. Sun, X. Zhou, K. Zhu, J. Zhou et al., Method for generating pore networks in porous particles of arbitrary shape, and its application to catalytic hydrogenation of benzene, Chem Eng J, vol.329, pp.56-65, 2017.

K. Kaneko, Determination of pore size and pore size distribution: 1. Adsorbents and catalysts, J Membr Sci, vol.96, issue.1, pp.59-89, 1994.

B. Zdravkov, J. ?ermák, M. ?efara, and J. Jank?, Pore classification in the characterization of porous materials: A perspective. Open Chem, vol.5, 2007.

D. H. Everett, Manual of Symbols and Terminology for Physicochemical Quantities and Units, Appendix II: Definitions, Terminology and Symbols in Colloid and Surface Chemistry, Pure Appl Chem, vol.31, issue.4, pp.577-638, 1972.

P. S. Liu and G. F. Chen, Chapter One -General Introduction to Porous Materials, Porous Materials, pp.1-20, 2014.

M. Chatain, Ref : TIP100WEB -"Plastiques et composites, 1998.

M. Chatain, Ref : TIP100WEB -"Plastiques et composites, 1998.

M. Biron, Silicones ou siloxanes -Structure et propriétés, 2007.

A. Colas and J. Curtis, Handbook of Polymer Applications in Medicine and Medical Devices, Plastics Design Library, pp.131-174, 2013.

A. Colas, J. Curtis, and . B--silicones, Biomaterials Science, pp.82-91, 2013.

A. Reghunadhan and T. S. Chapter, Polyurethanes: Structure, Properties, Synthesis, Characterization, and Applications, pp.1-16, 2017.

T. J. Touchet and E. M. Cosgriff-hernandez, Hierarchal structure-property relationships of segmented polyurethanes, Advances in Polyurethane Biomaterials, 2016.

M. Alger, Polymer Science Dictionary, 2017.

, Élastomères thermoplastiques -Nomenclature et termes abrégés. Organisation internationale de normalisation, vol.18064, p.2014, 2014.

M. Biron, Ref : TIP100WEB -"Plastiques et composites, Concept, propriétés de base, monographies des TPE d'usage général, 2012.

D. Collette, Ref : TIP100WEB -"Plastiques et composites, Feuilles et films de polyuréthanne thermoplastique (TPU), 2000.

S. H. Teoh, Z. G. Tang, and G. W. Hastings, Thermoplastic Polymers In Biomedical Applications: Structures, Properties and Processing

, , pp.261-90, 2016.

J. G. Drobny, 9 -Thermoplastic Polyurethane Elastomers, 2007.

, Plastics Design Library, pp.215-249

J. W. Boretos and S. J. Boretos, Chapter 4 Biomedical elastomers, Handbook of Biomaterial Properties

, , pp.291-337, 2016.

J. Berthier and P. Polyuréthanes, Ref : TIP100WEB -"Plastiques et composites, 2009.

, Biomedical Applications of Nondegradable Polymers -Natural and Synthetic Biomedical Polymers -Chapter, 2017.

, Polyurethane for biomedical applications: A review of recent developments -The Design and Manufacture of Medical Devices -3, 2017.

L. Xu, J. W. Bauer, and C. A. Siedlecki, Proteins, platelets, and blood coagulation at biomaterial interfaces, Colloids Surf B Biointerfaces, vol.124, pp.49-68, 2014.

F. J. Davis and G. R. Mitchell, Polyurethane Based Materials with Applications in Medical Devices, Bio-Materials and Prototyping Applications in Medicine

M. A. Boston and U. S. Springer, , pp.27-48, 2008.

. St and . John-kr, The use of polyurethane materials in the surgery of the spine: a review, Spine J, vol.14, issue.12, pp.3038-3085, 2014.

R. Dutra, G. M. Salomé, L. Leal, M. G. Alves, J. P. Moura et al., Cost comparison of pressure ulcer preventive dressings: hydrocolloid dressing versus transparent polyurethane film, J Wound Care, vol.25, issue.11, pp.635-675, 2016.

D. Bozukova, V. Bertrand, C. Pagnoulle, D. Pauw-gillet, and M. , Evaluation of a class of polyurethane materials for intraocular lens manufacturing: TPU for intraocular lens manufacturing, J Biomed Mater Res B Appl Biomater, vol.103, issue.6, pp.1274-86, 2015.

G. Widawski, M. Rawiso, and B. François, Self-organized honeycomb morphology of star-polymer polystyrene films, Nature, vol.369, issue.6479, pp.387-396, 1994.

U. Bunz, Breath Figures as a Dynamic Templating Method for Polymers and Nanomaterials, Adv Mater, vol.18, issue.8, pp.973-89, 2006.

D. Wu, F. Xu, B. Sun, R. Fu, H. He et al., Design and Preparation of Porous Polymers, Chem Rev, vol.112, issue.7, pp.3959-4015, 2012.

A. Zhang, H. Bai, and L. Li, Breath Figure: A Nature-Inspired Preparation Method for Ordered Porous Films, Chem Rev, vol.115, issue.18, pp.9801-68, 2015.

E. Bormashenko, Breath-Figure Self-Assembly, a Versatile Method of Manufacturing Membranes and Porous Structures: Physical, Chemical and Technological Aspects, vol.7, 2017.

P. Escalé, L. Rubatat, C. Derail, M. Save, and L. Billon, pH Sensitive Hierarchically Self-Organized Bioinspired Films, Macromol Rapid Commun, vol.32, issue.14, pp.1072-1078, 2011.

T. Kabuto, Y. Hashimoto, and O. Karthaus, Thermally Stable and Solvent Resistant Mesoporous Honeycomb Films from a Crosslinkable Polymer, Adv Funct Mater, vol.17, issue.17, pp.3569-73, 2007.

T. Smart, H. Lomas, M. Massignani, M. V. Flores-merino, L. R. Perez et al., Block copolymer nanostructures. Nano Today, vol.3, pp.38-46, 2008.

B. Darling, Block copolymers for photovoltaics, Energy Environ Sci, vol.2, issue.12, pp.1266-73, 2009.

A. Hozumi, S. Asakura, A. Fuwa, and N. Shirahata, Photochemical fabrication of a well-defined diblock copolymer nanotemplate using 172-nm vacuum ultraviolet light, J Colloid Interface Sci, vol.285, issue.2, pp.875-883, 2005.

J. Rzayev and M. A. Hillmyer, Nanochannel Array Plastics with Tailored Surface Chemistry, J Am Chem Soc, vol.127, issue.38, pp.13373-13382, 2005.

S. Kang and . Micro, Nano Replication: Processes and Applications

N. J. Hoboken and . Usa, , 2012.

P. Leclere and L. R. Viville-p, Ref : TIP155WEB -"Nanosciences et nanotechnologies, 2005.

Y. Zhang, C. Lo, J. A. Taylor, and S. Yang, Replica molding of high-aspect-ratio polymeric nanopillar arrays with high fidelity, Langmuir ACS J Surf Colloids, vol.22, issue.20, pp.8595-601, 2006.

A. Del-campo and E. Arzt, Fabrication Approaches for Generating Complex Micro-and Nanopatterns on Polymeric Surfaces, Chem Rev, vol.108, issue.3, pp.911-956, 2008.

M. Rothschild, Projection optical lithography. Mater Today, vol.8, pp.18-24, 2005.

Y. Kim and H. Jeong, Characteristics of negative electron beam resists, ma-N2410 and ma-N2405. Microelectron Eng, vol.85, pp.582-588, 2008.

H. Elsner and H. Meyer, Nanometer and high aspect ratio patterning by electron beam lithography using a simple DUV negative tone resist. Microelectron Eng, pp.291-297, 2001.

J. Ai, M. Lv, M. Jiang, J. Liu, and X. Zeng, Focused laser lithographic system for efficient and cross-scale fabrication of large-area and 3D micro-patterns, Opt Lasers Eng, vol.107, pp.335-376, 2018.

A. Ghicov and P. Schmuki, Self-ordering electrochemistry: a review on growth and functionality of TiO 2 nanotubes and other self-aligned MO x structures, Chem Commun, vol.0, issue.20, pp.2791-808, 2009.

H. Masuda and K. Fukuda, Ordered Metal Nanohole Arrays Made by a Two-Step Replication of Honeycomb Structures of Anodic Alumina, Science, vol.268, issue.5216, pp.1466-1474, 1995.

G. D. Sulka, Highly Ordered Anodic Porous Alumina Formation by Self-Organized Anodizing, Nanostructured Materials in Electrochemistry

G. Weinheim, , pp.1-116, 2008.

S. Ide, Ö. Ö. Capraz, P. Shrotriya, and K. R. Hebert, Oxide Microstructural Changes Accompanying Pore Formation During Anodic Oxidation of Aluminum, Electrochimica Acta, vol.232, pp.303-312, 2017.

V. Raspal, Élaboration de Surfaces Nanostructurées, Caractérisation et Modélisation de la Mouillabilité, 2013.

D. Losic and S. Simovic, Self-ordered nanopore and nanotube platforms for drug delivery applications, Expert Opin Drug Deliv, vol.6, issue.12, pp.1363-81, 2009.

P. Mishra and K. R. Hebert, Flow Instability Mechanism for Formation of Self-Ordered Porous Anodic Oxide Films, Electrochimica Acta, vol.222, pp.1186-90, 2016.

Z. Ling and Y. Li, Mechanisms of Nanoporous Alumina Formation and Self-organized Growth, Nanoporous Alumina

C. Springer, Springer Series in Materials Science). Available from, pp.1-30, 2015.

C. Cheng and A. Ngan, Theoretical Pore Growth Models for Nanoporous Alumina, Nanoporous Alumina

C. Springer, Springer Series in Materials Science). Available from, pp.31-60, 2015.

L. Zaraska, E. Wierzbicka, E. Kurowska-tabor, and G. D. Sulka, Synthesis of Nanoporous Anodic Alumina by Anodic Oxidation of Low Purity Aluminum Substrates, Nanoporous Alumina

C. Springer, Springer Series in Materials Science). Available from, pp.61-106, 2015.

W. Lee, J. R. Gösele, U. Nielsch, and K. , Fast fabrication of long-range ordered porous alumina membranes by hard anodization, Nat Mater, vol.5, issue.9, pp.741-748, 2006.

W. Lee and S. Park, Porous Anodic Aluminum Oxide: Anodization and Templated Synthesis of Functional Nanostructures, Chem Rev, vol.114, issue.15, pp.7487-556, 2014.

S. Ono, M. Saito, and H. Asoh, Self-Ordering of Anodic Porous Alumina Induced by Local Current Concentration: Burning, Electrochem Solid-State Lett, vol.7, issue.7, p.21, 2004.

Y. B. Li, M. J. Zheng, and L. Ma, High-speed growth and photoluminescence of porous anodic alumina films with controllable interpore distances over a large range, Appl Phys Lett, vol.91, issue.7, p.73109, 2007.

L. Yi, L. Zhiyuan, H. Xing, L. Yisen, and C. Yi, Investigation of intrinsic mechanisms of aluminium anodization processes by analyzing the current density, vol.2, pp.5164-71, 2012.

M. Norek, M. Dopiera?a, and W. J. St?pniowski, Ethanol influence on arrangement and geometrical parameters of aluminum concaves prepared in a modified hard anodization for fabrication of highly ordered nanoporous alumina, J Electroanal Chem, vol.750, pp.79-88, 2015.

V. Vega, J. García, J. M. Montero-moreno, H. B. Bachmann, J. Prida et al., Unveiling the Hard Anodization Regime of Aluminum: Insight into Nanopores Self-Organization and Growth Mechanism, ACS Appl Mater Interfaces, vol.7, issue.51, pp.28682-92, 2015.

X. Y. Han and W. Z. Shen, Improved two-step anodization technique for ordered porous anodic aluminum membranes, J Electroanal Chem, vol.655, issue.1, pp.56-64, 2011.

C. Acikgoz, M. A. Hempenius, J. Huskens, and G. J. Vancso, Polymers in conventional and alternative lithography for the fabrication of nanostructures, Eur Polym J, vol.47, issue.11, pp.2033-52, 2011.

Y. Cho, G. Kim, Y. Cho, S. Y. Lee, H. Minsky et al., Orthogonal Control of Stability and Tunable Dry Adhesion by Tailoring the Shape of Tapered Nanopillar Arrays, Adv Mater, vol.27, issue.47, pp.7788-93, 2015.

J. Martín and C. Mijangos, Tailored Polymer-Based Nanofibers and Nanotubes by Means of Different Infiltration Methods into Alumina Nanopores, Langmuir, vol.25, issue.2, pp.1181-1188, 2009.

M. Zhou, X. Xiong, D. Drummer, and B. Jiang, Molecular dynamics simulation and experimental investigation of the geometrical morphology development of injection-molded nanopillars on polymethylmethacrylate surface, Comput Mater Sci, vol.149, pp.208-224, 2018.

L. J. Heyderman, H. Schift, C. David, J. Gobrecht, and T. Schweizer, Flow behaviour of thin polymer films used for hot embossing lithography, Microelectron Eng, vol.54, issue.3-4, pp.229-274, 2000.

P. Datta and J. Goettert, Method for polymer hot embossing process development. Microsyst Technol, vol.13, pp.265-70, 2007.

S. Lan, H. Lee, K. E. Ni, J. Lee, S. Lai et al., A parameter study on the micro hot-embossing process of glassy polymer for pattern replication, vol.86, pp.2369-74, 2009.

J. Martín, J. Maiz, J. Sacristan, and C. Mijangos, Tailored polymer-based nanorods and nanotubes by "template synthesis": From preparation to applications, Polymer, vol.53, issue.6, pp.1149-66, 2009.

C. Mijangos, R. Hernández, and J. Martín, A review on the progress of polymer nanostructures with modulated morphologies and properties, using nanoporous AAO templates, Prog Polym Sci, pp.148-82, 2016.

H. Schift, L. J. Heyderman, M. A. Maur, . Der, and J. Gobrecht, Pattern formation in hot embossing of thin polymer films, Nanotechnology, vol.12, issue.2, pp.173-180, 2001.

W. Lee, M. Jin, W. Yoo, and J. Lee, Nanostructuring of a polymeric substrate with well-defined nanometer-scale topography and tailored surface wettability, Langmuir ACS J Surf Colloids, vol.20, issue.18, pp.7665-7674, 2004.

H. Taylor, Y. C. Lam, and D. Boning, An investigation of the detrimental impact of trapped air in thermoplastic micro-embossing, J Micromechanics Microengineering, vol.20, issue.6, p.65014, 2010.

P. Carlberg, L. Montelius, and J. Tegenfeldt, Nanoimprint in PDMS on glass with two-level hybrid stamp. Microelectron Eng, vol.85, pp.210-213, 2008.

J. H. Ryu, S. Lee, H. J. Lim, C. S. Lee, and J. J. , Polymer filling behaviors with various levels of imprinting velocity in nanoimprint lithography, Microelectron Eng, vol.117, pp.67-71, 2014.

Y. Guo, G. Liu, X. Zhu, and Y. Tian, Analysis of the demolding forces during hot embossing. Microsyst Technol, vol.13, pp.411-416, 2006.

T. Kitagawa, N. Nakamura, H. Kawata, and Y. Hirai, A novel template-release method for low-defect nanoimprint lithography, Microelectron Eng, vol.123, pp.65-72, 2014.

S. Merino, H. Schift, A. Retolaza, and T. Haatainen, The use of automatic demolding in nanoimprint lithography processes. Microelectron Eng, vol.84, pp.958-62, 2007.

V. Trabadelo, H. Schift, S. Merino, S. Bellini, and J. Gobrecht, Measurement of demolding forces in full wafer thermal nanoimprint. Microelectron Eng, vol.85, pp.907-916, 2008.

S. Park, Z. Song, L. Brumfield, A. Amirsadeghi, and J. Lee, Demolding temperature in thermal nanoimprint lithography, Appl Phys A, vol.97, issue.2, pp.395-402, 2009.

G. Jung, Z. Li, W. Wu, Y. Chen, D. L. Olynick et al., Vapor-phase self-assembled monolayer for improved mold release in nanoimprint lithography, Langmuir ACS J Surf Colloids, vol.21, issue.4, pp.1158-61, 2005.

B. Kim, E. J. Jeong, K. H. Kwon, Y. Yoo, D. Choi et al., Controlling Mold Releasing PropensityThe Role of Surface Energy and a Multiple Chain Transfer Agent, ACS Appl Mater Interfaces, vol.4, issue.7, pp.3465-70, 2012.

P. Roca-cusachs, F. Rico, E. Martínez, J. Toset, R. Farré et al., Stability of microfabricated high aspect ratio structures in poly(dimethylsiloxane), Langmuir ACS J Surf Colloids, vol.21, issue.12, pp.5542-5550, 2005.

C. Y. Hui, A. Jagota, Y. Y. Lin, and E. J. Kramer, Constraints on Microcontact Printing Imposed by Stamp Deformation, Langmuir. 2002 février, vol.18, issue.4, pp.1394-407

N. J. Glassmaker, T. Himeno, C. Hui, and J. Kim, Design of biomimetic fibrillar interfaces: 1. Making contact, J R Soc Interface, vol.1, issue.1, pp.23-33, 2004.

B. Chen and K. Lu, Moiré pattern nanopore and nanorod arrays by focused ion beam guided anodization and nanoimprint molding, Langmuir ACS J Surf Colloids, vol.27, issue.7, pp.4117-4142, 2011.

M. K. Choi, H. Yoon, K. Lee, and K. Shin, Simple fabrication of asymmetric high-aspect-ratio polymer nanopillars by reusable AAO templates, Langmuir ACS J Surf Colloids, vol.27, issue.6, pp.2132-2139, 2011.

C. Desrousseaux, R. Cueff, C. Aumeran, G. Garrait, B. Mailhot-jensen et al., Fabrication of Acrylonitrile-Butadiene-Styrene Nanostructures with Anodic Alumina Oxide Templates, Characterization and Biofilm Development Test for Staphylococcus epidermidis, PloS One, vol.10, issue.8, p.135632, 2015.

G. Wypych and . Ps-polystyrene, Handbook of Polymers, pp.560-566, 2016.

M. Biron, 4 -Detailed Accounts of Thermoplastic Resins, Thermoplastics and Thermoplastic Composites

W. Andrew-publishing, , 2013.

, Plastics Design Library, pp.189-714

J. E. Mark, Polymer Data Handbook, 2009.

G. Wypych, ABS poly(acrylonitrile-co-butadiene-co-styrene), Handbook of Polymers, pp.5-11, 2016.

K. Masouras, N. Silikas, and D. C. Watts, Correlation of filler content and elastic properties of resincomposites. Dent Mater, vol.24, pp.932-941, 2008.

W. Murphy, J. Black, and G. Hastings, Handbook of Biomaterial Properties, 2016.

J. Ruste, . Microscopie-Électronique-À-balayage--principe, and . Équipement, Ref : TIP630WEB -"Techniques d'analyse, 2013.

J. Ruste, Ref : TIP630WEB -"Techniques d'analyse, Microscopie électronique à balayage -Images, applications et développements [Internet, 2013.

J. Rivola and C. Frétigny, Ref : TIP673WEB -"Mesures mécaniques et dimensionnelles, 2005.

A. Tesp-v2--bruker and . Probes, , 2018.

D. J. Benjamin, J. O. Berger, M. Johannesson, B. A. Nosek, E. Wagenmakers et al., Redefine statistical significance. Nat Hum Behav, vol.2, pp.6-10, 2018.

F. Li, L. Zhang, and R. M. Metzger, On the Growth of Highly Ordered Pores in Anodized Aluminum Oxide, Chem Mater, vol.10, issue.9, pp.2470-80, 1998.

J. O'sullivan and G. C. Wood, The morphology and mechanism of formation of porous anodic films on aluminium, Proc R Soc Lond A, vol.317, pp.511-554, 1531.

V. Raspal, K. O. Awitor, C. Massard, E. Feschet-chassot, R. Bokalawela et al., Nanoporous surface wetting behavior: the line tension influence, Langmuir ACS J Surf Colloids, vol.28, issue.30, pp.11064-71, 2012.

J. Li, Z. Zhang, Y. Li, Y. Ma, L. Chen et al., Self-Organization Process of Aluminum Oxide during Hard Anodization, Electrochimica Acta, vol.213, pp.14-20, 2016.

W. Lee, K. Schwirn, M. Steinhart, E. Pippel, R. Scholz et al., Structural engineering of nanoporous anodic aluminium oxide by pulse anodization of aluminium, Nat Nanotechnol, vol.3, issue.4, pp.234-243, 2008.

W. Lee, J. Kim, and U. Gösele, Spontaneous Current Oscillations during Hard Anodization of Aluminum under Potentiostatic Conditions, Adv Funct Mater, vol.20, issue.1, pp.21-28, 2010.

L. Zaraska, G. D. Sulka, and M. Jasku?a, Anodic alumina membranes with defined pore diameters and thicknesses obtained by adjusting the anodizing duration and pore opening/widening time, J Solid State Electrochem, vol.15, pp.2427-2463, 2011.

K. Surawathanawises and X. Cheng, Nanoporous anodic aluminum oxide with a long-range order and tunable cell sizes by phosphoric acid anodization on pre-patterned substrates, Electrochimica Acta, vol.117, pp.498-503, 2014.

Y. Li, M. Zheng, L. Ma, and W. Shen, Fabrication of highly ordered nanoporous alumina films by stable high-field anodization, Nanotechnology, vol.17, issue.20, p.5101, 2006.

Y. Guo, L. Zhang, M. Han, X. Wang, J. Xie et al., The effect of ethylene glycol on pore arrangement of anodic aluminium oxide prepared by hard anodization, R Soc Open Sci, vol.5, issue.3, p.171412, 2018.

L. Zaraska, G. D. Sulka, and M. Jasku?a, The effect of n-alcohols on porous anodic alumina formed by self-organized two-step anodizing of aluminum in phosphoric acid, Surf Coat Technol, vol.204, issue.11, pp.1729-1766, 2010.

T. Aerts, I. De-graeve, and H. Terryn, Study of initiation and development of local burning phenomena during anodizing of aluminium under controlled convection, Electrochimica Acta, vol.54, issue.2, pp.270-279, 2008.

T. Aerts, I. De-graeve, and H. Terryn, Anodizing of aluminium under applied electrode temperature: Process evaluation and elimination of burning at high current densities, Surf Coat Technol, vol.204, issue.16, pp.2754-60, 2010.

T. Aerts, E. Tourwé, R. Pintelon, I. De-graeve, and H. Terryn, Modelling of the porous anodizing of aluminium: Generation of experimental input data and optimization of the considered model, Surf Coat Technol, vol.205, pp.4388-96, 2011.

M. Pérez-page, Y. E. Li, J. Rahman, M. Dryden, D. M. Vidu et al., Template-based syntheses for shape controlled nanostructures, Adv Colloid Interface Sci, vol.234, pp.51-79, 2016.

H. Wu, Y. Higaki, and A. Takahara, Molecular self-assembly of one-dimensional polymer nanostructures in nanopores of anodic alumina oxide templates, Prog Polym Sci, vol.77, pp.95-117, 2018.

C. Goh, K. M. Coakley, and M. D. Mcgehee, Nanostructuring titania by embossing with polymer molds made from anodic alumina templates, Nano Lett, vol.5, issue.8, pp.1545-1554, 2005.

B. Farshchian, A. Amirsadeghi, S. M. Hurst, J. Wu, J. Lee et al., Soft UV-nanoimprint lithography on non-planar surfaces, Microelectron Eng, vol.88, issue.11, pp.3287-92, 2011.

E. Delamarche, H. Schmid, B. Michel, and H. Biebuyck, Stability of molded polydimethylsiloxane microstructures, Adv Mater, vol.9, issue.9, pp.741-747, 1997.

F. Hamouda, H. Sahaf, S. Held, G. Barbillon, P. Gogol et al., Large area nanopatterning by combined anodic aluminum oxide and soft UV-NIL technologies for applications in biology, Microelectron Eng, vol.88, issue.8, pp.2444-2450, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00629113

C. Desrousseaux, Prévention de l'adhésion bactérienne et du développement du biofilm sur les dispositifs médicaux de la perfusion via des surfaces nanostructurées, 2015.

X. Ye, H. Liu, Y. Ding, H. Li, and B. Lu, Research on the cast molding process for high quality PDMS molds, Microelectron Eng, vol.86, issue.3, pp.310-313, 2009.

H. Taylor, Y. C. Lam, and D. Boning, An investigation of the detrimental impact of trapped air in thermoplastic micro-embossing, J Micromechanics Microengineering, vol.20, issue.6, p.65014, 2010.

S. F. Chini and A. Amirfazli, Understanding Pattern Collapse in Photolithography Process Due to Capillary Forces, Langmuir, vol.26, issue.16, pp.13707-13721, 2010.

S. F. Chini and A. Amirfazli, Collapse of patterns with various geometries during drying in photolithography: numerical study, J MicroNanolithography MEMS MOEMS, vol.11, issue.3, p.33003, 2012.

C. Wohlfarth, Surface Tension of Pure Liquids and Binary Liquid Mixtures

M. D. Lechner, E. Berlin, and . Heidelberg, , 2008.

, Physical Chemistry

W. Jiang, B. Lei, H. Liu, D. Niu, T. Zhao et al., Fabrication of directional nanopillars with high-aspect-ratio using a stretching imprint process with a microcavity mold, Nanoscale, vol.9, issue.6, pp.2172-2179, 2009.

D. Chandra and S. Yang, Capillary-Force-Induced Clustering of Micropillar Arrays: Is It Caused by Isolated Capillary Bridges or by the Lateral Capillary Meniscus Interaction Force? Langmuir, vol.25, pp.10430-10434, 2009.

D. Chandra and S. Yang, Stability of High-Aspect-Ratio Micropillar Arrays against Adhesive and Capillary Forces, Acc Chem Res, vol.43, issue.8, pp.1080-91, 2010.

Q. Wang, J. Zhang, R. Zhang, and X. Zheng, Analysis of Debonding Problem during Demolding Process of Nanoimprinting, J Photopolym Sci Technol, vol.30, issue.5, pp.545-50, 2017.

T. Tochino, K. Uemura, M. Michalowski, K. Fujii, M. Yasuda et al., Computational study of the effect of side wall quality of the template on release force in nanoimprint lithography, Jpn J Appl Phys, vol.54, issue.6S1, pp.6-06, 2015.

F. Chalvin, N. Nakamura, T. Tochino, M. Yasuda, H. Kawata et al., Impact of template stiffness during peeling release in nanoimprint lithography, J Vac Sci Technol B, vol.34, issue.6, pp.6-403, 2016.

M. E. Dirckx and D. E. Hardt, Analysis and characterization of demolding of hot embossed polymer microstructures, J Micromechanics Microengineering, vol.21, issue.8, p.85024, 2011.

H. Sun, J. Liu, P. Gu, and D. Chen, Anti-sticking treatment for a nanoimprint stamp, Appl Surf Sci, vol.254, issue.10, pp.2955-2964, 2008.

S. Grimm, R. Giesa, K. Sklarek, A. Langner, U. Gösele et al., Nondestructive Replication of Self-Ordered Nanoporous Alumina Membranes via Cross-Linked Polyacrylate Nanofiber Arrays, Nano Lett, vol.8, issue.7, pp.1954-1963, 2008.

M. Zhou, X. Xiong, B. Jiang, and C. Weng, Fabrication of high aspect ratio nanopillars and micro/nano combined structures with hydrophobic surface characteristics by injection molding, Appl Surf Sci, vol.427, pp.854-60, 2018.

D. Yamashita, J. Taniguchi, and H. Suzuki, Lifetime evaluation of release agent for ultraviolet nanoimprint lithography. Microelectron Eng, vol.97, pp.109-121, 2012.

I. Horcas, R. Fernández, J. M. Gómez-rodríguez, J. Colchero, J. Gómez-herrero et al., WSXM: A software for scanning probe microscopy and a tool for nanotechnology, Rev Sci Instrum, vol.78, issue.1, p.13705, 2007.

G. D. Sulka and W. J. St?pniowski, Structural features of self-organized nanopore arrays formed by anodization of aluminum in oxalic acid at relatively high temperatures, Electrochimica Acta, vol.54, issue.14, pp.3683-91, 2009.

W. J. St?pniowski, A. Nowak-st?pniowska, and Z. Bojar, Quantitative arrangement analysis of anodic alumina formed by short anodizations in oxalic acid, Mater Charact, vol.78, pp.79-86, 2013.

W. J. St?pniowski, M. Michalska-doma?ska, M. Norek, and T. Czujko, Fast Fourier transform based arrangement analysis of poorly organized alumina nanopores formed via self-organized anodization in chromic acid, Mater Lett, vol.117, pp.69-73, 2014.

Y. Y. Zhu, G. Q. Ding, J. N. Ding, N. Y. Yuan, and . Afm, SEM and TEM Studies on Porous Anodic Alumina, vol.5, pp.725-759, 2010.

H. Janik and M. Marzec, A review: Fabrication of porous polyurethane scaffolds, Mater Sci Eng C, vol.48, pp.586-91, 2015.

S. An, B. S. Kim, and J. Lee, Porous polyurethane films having biomimetic ordered open pores: Indentation properties, J Ind Eng Chem, vol.33, pp.362-367, 2016.

C. Chu, S. Yeh, S. Peng, T. Kang, W. Guo et al., Preparation of microporous thermoplastic polyurethane by low-temperature supercritical CO 2 foaming, J Cell Plast, vol.53, issue.2, pp.135-50, 2017.

Y. J. Zhao, Q. S. Zhao, L. J. Lu, and Y. Sy, Fabrication of polyurethane(PU) nanotubes with array by wetting anodic aluminium oxide template with polymer solution and melt, Mater Res Innov, vol.19, issue.5, pp.345-353, 2015.

F. Pantanella, P. Valenti, T. Natalizi, D. Passeri, and F. Berlutti, Analytical techniques to study microbial biofilm on abiotic surfaces: pros and cons of the main techniques currently in use, Ann Ig Med Prev E Comunita, vol.25, issue.1, pp.31-42, 2013.

K. Doll, K. L. Jongsthaphongpun, N. S. Stumpp, A. Winkel, and M. Stiesch, Quantifying implant-associated biofilms: Comparison of microscopic, microbiologic and biochemical methods, J Microbiol Methods, vol.130, pp.61-69, 2016.

W. S. Lai and D. Assimos, The Role of Antibiotic Prophylaxis in Percutaneous Nephrolithotomy, Rev Urol, vol.18, issue.1, pp.10-14, 2016.

E. Tuzel, O. C. Aktepe, and B. Akdogan, Prospective Comparative Study of Two Protocols of Antibiotic Prophylaxis in Percutaneous Nephrolithotomy, J Endourol, vol.27, issue.2, pp.172-178, 2013.

M. Malone, D. M. Goeres, I. Gosbell, K. Vickery, S. Jensen et al., Approaches to biofilmassociated infections: the need for standardized and relevant biofilm methods for clinical applications, Expert Rev Anti Infect Ther, vol.15, issue.2, pp.147-56, 2017.

H. Liu, B. Lei, W. Jiang, Y. Li, L. Yin et al., Ultrasound-assisted recovery of free-standing high-aspect-ratio micropillars, vol.6, pp.16640-16644, 2016.

, Materials Data Book. Cambridge. Materials Data Book. Cambridge, 2003.

A. Keilbach, J. Moses, R. Köhn, M. Döblinger, and T. Bein, Electrodeposition of Copper and Silver Nanowires in Hierarchical Mesoporous Silica/Anodic Alumina Nanostructures, Chem Mater, vol.22, pp.5430-5436, 2010.

N. T. Nesbitt and M. J. Naughton, A Review: Methods To Fabricate Vertically Oriented Metal Nanowire Arrays, Ind Eng Chem Res, vol.56, issue.39, pp.10949-57, 2017.

A. Zhang, J. Zhou, P. Das, Y. Xiao, F. Gong et al., Revisiting Metal Electrodeposition in Porous Anodic Alumina: Toward Tailored Preparation of Metal Nanotube Arrays, J Electrochem Soc, vol.165, issue.3, pp.129-163, 2018.

M. I. Irshad, F. Ahmad, N. M. Mohamed, and M. Z. Abdullah, Preparation and structural characterization of template assisted electrodeposited copper nanowires, Int J Electrochem Sci, vol.9, pp.2548-2555, 2014.

, Évaluation biologique des dispositifs médicaux -Partie 1: Évaluation et essais au sein d'un processus de gestion du risque. Organisation internationale de normalisation, 2010.

, Évaluation biologique des dispositifs médicaux -Partie 5 : essais concernant la cytotoxicité in vitro. Organisation internationale de normalisation, 2010.

W. Li, J. Zhou, and Y. Xu, Study of the in vitro cytotoxicity testing of medical devices, Biomed Rep, vol.3, issue.5, pp.617-637, 2015.

J. Zhang, B. Cui, and H. Ge, Fabrication of flexible mold for hybrid nanoimprint-soft lithography, Microelectron Eng, vol.88, issue.8, pp.2192-2197, 2011.

P. Yi, H. Wu, C. Zhang, L. Peng, and X. Lai, Roll-to-roll UV imprinting lithography for micro/nanostructures, J Vac Sci Technol B, vol.33, issue.6, p.60801, 2015.

N. Koo, U. Plachetka, M. Otto, J. Bolten, J. Jeong et al., The fabrication of a flexible mold for high resolution soft ultraviolet nanoimprint lithography, Nanotechnology, vol.19, issue.22, p.225304, 2008.

H. Lan and H. Liu, UV-nanoimprint lithography: structure, materials and fabrication of flexible molds, J Nanosci Nanotechnol, vol.13, issue.5, pp.3145-72, 2013.

L. Reeve and P. Baldrick, Biocompatibility assessments for medical devices -evolving regulatory considerations. Expert Rev Med Devices, vol.14, pp.161-168, 2017.

M. Auffan, J. Rose, J. Bottero, G. V. Lowry, J. Jolivet et al., Towards a definition of inorganic nanoparticles from an environmental, health and safety perspective, Nat Nanotechnol, vol.4, issue.10, pp.634-675, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00446833

W. G. Kreyling, M. Semmler-behnke, and Q. Chaudhry, A complementary definition of nanomaterial, Nano Today, vol.5, issue.3, pp.165-173, 2010.

D. Afssaps, . Dsm-/-unité, and . Dispositifs, Rapport NanoDM : Evaluation biologique des dispositifs médicaux contenant des nanomatériaux, 2011.

J. Piret, O. M. Bondarenko, M. Boyles, M. Himly, A. R. Ribeiro et al., Pan-European inter-laboratory studies on a panel of in vitro cytotoxicity and pro-inflammation assays for nanoparticles, Arch Toxicol, vol.91, issue.6, pp.2315-2345, 2017.

L. Xu and C. A. Siedlecki, Submicron-textured biomaterial surface reduces staphylococcal bacterial adhesion and biofilm formation, Acta Biomater, vol.8, issue.1, pp.72-81, 2012.

L. Jin, W. Guo, P. Xue, H. Gao, M. Zhao et al., Quantitative assay for the colonization ability of heterogeneous bacteria on controlled nanopillar structures, Nanotechnology, vol.26, issue.5, p.55702, 2015.

W. Choi, E. P. Chan, J. Park, W. Ahn, H. W. Jung et al., Nanoscale Pillar-Enhanced Tribological Surfaces as Antifouling Membranes, ACS Appl Mater Interfaces, vol.8, issue.45, pp.31433-31474, 2016.

L. Xu and C. A. Siedlecki, Protein adsorption, platelet adhesion, and bacterial adhesion to polyethylene-glycol-textured polyurethane biomaterial surfaces, J Biomed Mater Res B Appl Biomater, vol.105, issue.3, pp.668-78, 2015.

P. Chennell, E. Feschet-chassot, V. Sautou, and B. Mailhot-jensen, Preparation of Ordered Mésoporous and Macroporous Thermoplastic Polyurethane Surfaces for Potential Medical Applications, Journal of Biomaterials Applications, vol.1, issue.10, pp.1317-1328, 2018.

E. Feschet-chassot, P. Chennell, R. Cueff, B. Mailhot-jensen, and V. Sautou, Anodic alumina oxide surfaces prepared by dual hard and mild anodization at subzero temperature: impact on pore dimensions and surface wettability, Article, vol.2