U. Ercan, H. Acar, Y. Choset, M. Zhang, and . Schervish, Path planning for robotic demining: Robust sensor-based coverage of unstructured environments and probabilistic methods, The International journal of robotics research, vol.22, issue.7-8, pp.441-466, 2003.

D. Alciatore and C. Ng, Determining manipulator workspace boundaries using the monte carlo method and least squares segmentation, ASME Robotics: Kinematics, Dynamics and Controls, vol.72, pp.141-146, 1994.

. Mf-aly, . Abbas, M. Said, and . Megahed, Robot workspace estimation and base placement optimisation techniques for the conversion of conventional work cells into autonomous flexible manufacturing systems, International Journal of Computer Integrated Manufacturing, vol.23, issue.12, pp.1133-1148, 2010.

V. Mayur, S. S. Andulkar, and . Chiddarwar, Incremental approach for trajectory generation of spray painting robot, Industrial Robot: An International Journal, vol.42, issue.3, pp.228-241, 2015.

V. Mayur, . Andulkar, and . Chiddarwar, Automated CAD Based Trajectory for Spray Painting Robot: Variable Velocity Approach, Proceedings of the ASME 2015 International Design Engineering Technical Conferences {&} Computers and Information in Engineering Conference, pp.1-10, 2015.

V. Mayur, S. S. Andulkar, A. S. Chiddarwar, and . Marathe, Novel integrated offline trajectory generation approach for robot assisted spray painting operation, Journal of Manufacturing Systems, vol.37, pp.201-216, 2015.

J. K. Antonio, R. Ramabhadran, and T. Ling, A Framework For Optimal Trajectory Planning For Automated Spray Coating, 1997.

H. Prasad-n-atkar, A. A. Choset, and . Rizzi, Towards Optimal Coverage of 2-dimensional surfaces embedded in R3 choice of start curve, Proceedings ofthe 2003 IEEE-JRSJ Intl Conference on Intelligent Robots and Systems, number October, 2003.

A. Prasad-n-atkar, . Greenfield, C. David, H. Conner, A. A. Choset et al., Uniform Coverage of Automotive Surface Patches, The International Journal of Robotics Research, vol.24, issue.11, pp.883-898, 2005.

A. Prasad-n-atkar, . Greenfield, C. David, H. Conner, A. A. Choset et al., Uniform coverage of automotive surface patches, The International Journal of Robotics Research, vol.24, issue.11, pp.883-898, 2005.

A. Bircher, K. A. , M. Burri, P. Oettershagen, S. Omari et al., Structural inspection path planning via iterative viewpoint resampling with application to aerial robotics, IEEE International Conference on, pp.6423-6430, 2015.

Z. Bo, Z. Xi, M. Zhengda, and D. Xianzhong, Off-line Programming System of Industrial Robot for Spraying Manufacturing Optimization, Proceedings of the 33rd chinese control conference, pp.8495-8500, 2014.

G. Boschetti, A. Rosa, and . Trevisani, Optimal robot positioning using task-dependent and direction-selective performance indexes: General definitions and application to a parallel robot, Robotics and Computer-Integrated Manufacturing, vol.29, issue.2, pp.431-443, 2013.

F. Burget and M. Bennewitz, Stance selection for humanoid grasping tasks by inverse reachability maps, Robotics and Automation (ICRA), 2015 IEEE International Conference on, pp.5669-5674, 2015.

F. Busetti, Simulated annealing overview. World Wide Web, 2003.

B. Cakir, F. Altiparmak, and B. Dengiz, Multi-objective optimization of a stochastic assembly line balancing: A hybrid simulated annealing algorithm, Computers & Industrial Engineering, vol.60, issue.3, pp.376-384, 2011.

D. Chablat, P. Wenger, and J. Merlet, Workspace analysis of the orthoglide using interval analysis, Advances in Robot Kinematics, pp.397-406, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00145304

D. Chablat, P. Wenger, F. Majou, and J. Merlet, An interval analysis based study for the design and the comparison of three-degrees-of-freedom parallel kinematic machines, The International Journal of Robotics Research, vol.23, issue.6, pp.615-624, 2004.

D. Chablat, P. Wenger, and J. Merlet, A comparative study between two three-dof parallel kinematic machines using kinetostatic criteria and interval analysis, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00163905

H. Chen and N. Xi, Automated tool trajectory planning of industrial robots for painting composite surfaces, International Journal of Advanced Manufacturing Technology, vol.35, issue.7-8, pp.680-696, 2006.

H. Chen, N. Xi, Z. Wei, Y. Chen, and J. Dahl, Robot trajectory integration for painting automotive parts with multiple patches, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422), vol.3, pp.3984-3989, 2003.

H. Chen, N. Xi, W. Sheng, and Y. Chen, General Framework of Optimal Tool Trajectory Planning for Free Form Surfaces, Journal of Manufactirung Science and Engineering, vol.127, pp.49-59, 2005.

H. Chen, N. Xi, W. Sheng, J. Dahl, and Z. Li, Optimal tool trajectory integration in surface manufacturing, IFAC Proceedings Volumes, vol.38, pp.211-216, 2005.

H. Chen, F. Thomas, and L. Xiongzi, Automated industrial robot path planning for spray painting a process: A review, 4th IEEE Conference on Automation Science and Engineering, pp.522-527, 2008.

H. Chen, T. Fuhlbrigge, and X. Li, A review of CAD-based robot path planning for spray painting, Industrial Robot: An International Journal, vol.36, issue.1, pp.45-50, 2009.

, Automated robot trajectory planning for spray painting of free form surfaces in automotive manufacturing, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292), vol.1, pp.0-5, 2002.

W. Chen and D. Zhao, Path planning for spray painting robot of workpiece surfaces, Mathematical Problems in Engineering, 2013.

V. Chvatal, A combinatorial theorem in plane geometry, Journal of Combinatorial Theory, Series B, vol.18, issue.1, pp.39-41, 1975.

C. Marcelo, C. Couto, P. Souza, and . Rezende, An exact and efficient algorithm for the orthogonal art gallery problem, SIBGRAPI 2007. XX Brazilian Symposium on, pp.87-94, 2007.

D. Daney, N. Andreff, G. Chabert, and Y. Papegay, Interval method for calibration of parallel robots: Vision-based experiments. Mechanism and Machine Theory, vol.41, pp.929-944, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00907729

B. Desrochers and L. Jaulin, Minkowski operations of sets with application to robot localization, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01495287

B. Dias, R. Zlot, N. Kalra, and A. Stentz, Market-based multirobot coordination: A survey and analysis, Proceedings of the IEEE, vol.94, issue.7, pp.1257-1270, 2006.

O. Didrit, Analyse par intervalles pour l'automatique; Résolution globale et garantie de problèmes non linéaires en robotique et en commande robuste, vol.11, 1997.

J. Dong and J. C. Trinkle, Orientation-based reachability map for robot base placement, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp.1488-1493, 2015.

H. Edelsbrunner, O. Joseph, E. Rourke, and . Welzl, Stationing guards in rectilinear art galleries. Computer vision, graphics, and image processing, vol.27, pp.167-176, 1984.

B. Englot, S. Franz, and . Hover, Sampling-based coverage path planning for inspection of complex structures, Icaps, 2012.

M. Valera-espina, R. Grech, D. D. Jager, P. Remagnino, L. Iocchi et al.,

, Multi-robot teams for environmental monitoring, Innovations in Defence Support Systems-3, pp.183-209, 2011.

S. Fisk, A short proof of chvátal's watchman theorem, Journal of Combinatorial Theory, Series B, vol.24, issue.3, p.374, 1978.

S. Deborah, D. J. Franzblau, and . Kleitman, An algorithm for covering polygons with rectangles, Information and control, vol.63, issue.3, pp.164-189, 1984.

P. J. Markus, T. Fromherz, Y. Hogg, W. Shang, and . Jackson, Modular robot control and continuous constraint satisfaction, Proc. IJCAI-01 Workshop on Modelling and Solving Problems with Constraints, pp.47-56, 2001.

A. Gasparetto, R. Vidoni, D. Pillan, and E. Saccavini, Automatic Path and Trajectory Planning for Robotic Spray Painting, pp.1-6, 2012.

M. Gavriliu, Towards more efficient interval analysis: Corner forms and a remainder interval Newton method, 2005.

E. Gelle and B. Faltings, Solving mixed and conditional constraint satisfaction problems, Constraints, vol.8, issue.2, pp.107-141, 2003.

H. González-banos, A randomized art-gallery algorithm for sensor placement, Proceedings of the seventeenth annual symposium on Computational geometry, pp.232-240

E. D. Goodman and L. T. Hoppensteradt, A method for accurate simulation of robotic spray application using empirical parameterization, IEEE International Conference on, vol.2, pp.1357-1368, 1991.

M. Gouttefarde, J. Merlet, and D. Daney, Wrench-feasible workspace of parallel cable-driven mechanisms, Robotics and Automation, pp.1492-1497, 2007.
URL : https://hal.archives-ouvertes.fr/lirmm-00199377

M. Gouttefarde, D. Daney, and J. Merlet, Interval-analysis-based determination of the wrench-feasible workspace of parallel cable-driven robots, IEEE Transactions on Robotics, vol.27, issue.1, pp.1-13, 2011.
URL : https://hal.archives-ouvertes.fr/lirmm-00573491

G. Xiaoqing and . Gu, The behavior of simulated annealing in stochastic optimization, 2008.

Y. Guan and K. Yokoi, Reachable space generation of a humanoid robot using the monte carlo method, IEEE/RSJ International Conference on, pp.1984-1989, 2006.

E. Hansen and G. W. Walster, Global optimization using interval analysis. Marcel Dekker, 2004.

. James-a-hansen, S. Gupta, and . Kazerounian, Generation and evaluation of the workspace of a manipulator, The International Journal of Robotics Research, vol.2, issue.3, pp.22-31, 1983.

F. Hao and J. Merlet, Multi-criteria optimal design of parallel manipulators based on interval analysis. Mechanism and machine theory, vol.40, pp.157-171, 2005.

M. Hassan, D. Liu, and G. Paul, Modeling and stochastic optimization of complete coverage under uncertainties in multi-robot base placements, IEEE/RSJ International Confer, 2016.

M. Hassan and D. Liu, Simultaneous area partitioning and allocation for complete coverage by multiple autonomous industrial robots, Autonomous Robots, vol.41, issue.8, pp.1609-1628, 2017.

M. Hassan, D. Liu, S. Huang, and G. Dissanayake, Task oriented area partitioning and allocation for optimal operation of multiple industrial robots in unstructured environments, Control Automation Robotics & Vision (ICARCV), pp.1184-1189, 2014.

M. Hassan, D. Liu, G. Paul, and S. Huang, An approach to base placement for effective collaboration of multiple autonomous industrial robots, Robotics and Automation (ICRA), 2015 IEEE International Conference on, pp.3286-3291, 2015.

D. Henderson, H. Sheldon, A. W. Jacobson, and . Johnson, The theory and practice of simulated annealing, Handbook of metaheuristics, pp.287-319, 2003.

P. Hertling, L. Hog, R. Larsen, J. W. Perram, and H. G. Petersen, Task curve planning for painting robots. i. process modeling and calibration, IEEE Transactions on Robotics and Automation, vol.12, issue.2, pp.324-330, 1996.

L. Jaulin, I. Braems, and E. Walter, Interval methods for nonlinear identification and robust control, Proceedings of the 41st IEEE Conference on Decision and Control, vol.4, pp.4676-4681, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00845884

L. Jaulin, Consistency techniques for the localization of a satellite, International Workshop on Global Optimization and Constraint Satisfaction, pp.157-170, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00845714

L. Jaulin, Localization of an underwater robot using interval constraint propagation, International Conference on Principles and Practice of Constraint Programming, pp.244-255, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00449523

L. Jaulin, A nonlinear set membership approach for the localization and map building of underwater robots, IEEE Transactions on Robotics, vol.25, issue.1, pp.88-98, 2009.

L. Jaulin, M. Kieffer, O. Didrit, and E. Walter, Applied Interval Analysis with Examples in Parameter and State Estimation, Robust Control and Robotics, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00845131

L. Jaulin, F. Dabe, A. Bertholom, and M. Legris, A set approach to the simultaneous localization and map building-application to underwater robots, ICINCO-RA, pp.65-69, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00518635

J. Jovic, A. Escande, K. Ayusawa, E. Yoshida, A. Kheddar et al., Humanoid and human inertia parameter identification using hierarchical optimization, IEEE Transactions on Robotics, vol.32, issue.3, pp.726-735, 2016.
URL : https://hal.archives-ouvertes.fr/lirmm-01348410

J. Kahn, M. Klawe, and D. Kleitman, Traditional galleries require fewer watchmen, SIAM Journal on Algebraic Discrete Methods, vol.4, issue.2, pp.194-206, 1983.

R. Kalawoun, S. Lengagne, F. Bouchon, and Y. Mezouar, Bsplines properties with interval analysis for constraint satisfaction problem: Application in robotics, 15th International Conference on Intelligent Autonomous Systems IAS-15, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01913931

R. Kalawoun, S. Lengagne, and Y. Mezouar, Optimal robot base placements for coverage tasks, 14th IEEE International Conference on Automation Science and Engineering (CASE 2018), 2018.
URL : https://hal.archives-ouvertes.fr/hal-01913861

F. B. Ju-hsien-kao and . Prinz, Optimal Motion Planning for Deposition in Layered Manufacturing, ASME Design Engineering Technical Conferences, p.10, 1998.

A. Khamis and A. Elgindy, Minefield mapping using cooperative multirobot systems, Journal of Robotics, 2012.

A. Kumar, S. Mayank, and . Patel, Mapping the manipulator workspace using interactive computer graphics, The International journal of robotics research, vol.5, issue.2, pp.122-130, 1986.

A. Kumar and . Waldron, The workspaces of a mechanical manipulator, Journal of Mechanical Design, vol.103, issue.3, pp.665-672, 1981.

C. Lawrence, J. L. Zhou, and A. L. Tits, User's Guide for CFSQP Version 2.5: A C Code for Solving (Large Scale) Constrained Nonlinear (Minimax) Optimization Problems, Generating Iterates Satisfying All Inequality Constraints

F. L. Bars, A. Bertholom, J. Sliwka, and L. Jaulin, Interval slam for underwater robots; a new experiment, NOLCOS 2010, p.page XX, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00636026

F. L. Bars, A. Bertholom, J. Sliwka, and L. Jaulin, Interval SLAM for underwater robots; a new experiment, NOLCOS 2010, p.page XX, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00636026

T. W. Lee and . Yang, On the evaluation of manipulator workspace, Journal of Mechanisms, Transmissions, and Automation in Design, vol.105, issue.1, pp.70-77, 1983.

N. S'ebastien-lengagne, P. Ramdani, and . Fraisse, Planning and fast replanning safe motions for humanoid robots, IEEE Transactions on Robotics, vol.27, issue.6, pp.1095-1106, 2011.

J. S'ebastien-lengagne, E. Vaillant, A. Yoshida, and . Kheddar, Generation of Whole-body Optimal Dynamic Multi-Contact Motions, The International Journal of Robotics Research, p.17, 2013.

S. Lengagne, R. Kalawoun, and Y. Mezouar, Reducing pessimism in interval analysis using bsplines properties: Application to robotics. Reliable Computing

O. Leveque, L. Jaulin, D. Meizel, and E. Walter, Vehicle localization from inaccurate telemetric data: a set inversion approach, 5th IFAC Symposium on Robot Control SY. RO. CO.'97, vol.1, pp.179-186, 1997.
URL : https://hal.archives-ouvertes.fr/hal-00844041

F. Li, A. De, G. H. Zhao, and . Xie, Trajectory optimization of spray painting robot based on adapted genetic algorithm, International Conference on Measuring Technology and Mechatronics Automation, vol.2, pp.907-910, 2009.

Y. Liao and K. Su, Multi-robot-based intelligent security system, Artificial Life and Robotics, vol.16, issue.2, p.137, 2011.

F. Charles and . Van-loan, The ubiquitous kronecker product, Journal of Computational and Applied Mathematics, vol.123, issue.1, pp.85-100, 2000.

T. Lozano-pérez and L. P. Kaelbling, A constraint-based method for solving sequential manipulation planning problems, IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.3684-3691, 2014.

B. Y. Lu, Design and optimization of spray-gun trajectory for spray painting robot, 1997.

A. Marino, L. E. Parker, G. Antonelli, and F. Caccavale, A decentralized architecture for multi-robot systems based on the null-space-behavioral control with application to multi-robot border patrolling, Journal of Intelligent & Robotic Systems, vol.71, issue.3-4, pp.423-444, 2013.

J. Merlet, Determination of 6d workspaces of gough-type parallel manipulator and comparison between different geometries, The International Journal of Robotics Research, vol.18, issue.9, pp.902-916, 1999.

J. Merlet, An improved design algorithm based on interval analysis for spatial parallel manipulator with specified workspace, ICRA. IEEE International Conference on, vol.2, pp.1289-1294, 2001.

J. Merlet, Solving the forward kinematics of a gough-type parallel manipulator with interval analysis, The International Journal of robotics research, vol.23, issue.3, pp.221-235, 2004.

J. Merlet, Interval analysis and reliability in robotics, International Journal of Reliability and Safety, vol.3, issue.1-3, pp.104-130, 2009.
URL : https://hal.archives-ouvertes.fr/inria-00001152

S. Mitsi, K. Bouzakis, D. Sagris, and G. Mansour, Determination of optimum robot base location considering discrete end-effector positions by means of hybrid genetic algorithm, Robotics and Computer-Integrated Manufacturing, vol.24, issue.1, pp.50-59, 2008.

R. E. Moore and F. Bierbaum, Methods and Applications of Interval Analysis, SIAM Studies in Applied and Numerical Mathematics) (Siam Studies in Applied Mathematics, issue.2

, Soc for Industrial & Applied Math, 1979.

Y. Takeuchi and N. Asakawa, Teachingless spray-painting of sculptured surface by an industrial robot, Robotics and Automation, 1997. Proceedings, vol.3, pp.1875-1879, 1997.

K. Nagatani, Y. Okada, N. Tokunaga, S. Kiribayashi, K. Yoshida et al., Multirobot exploration for search and rescue missions: A report on map building in robocuprescue, Journal of Field Robotics, vol.28, issue.3, pp.373-387, 2009.

L. Netz, Using horner schemes to improve the efficiency and precision of interval constraint propagation, 2015.

R. Neuland, J. Nicola, R. Maffei, and L. Jaulin, Edson Prestes, and Mariana Kolberg. Hybridization of monte carlo and set-membership methods for the global localization of underwater robots, 2014 IEEE/RSJ International Conference on, pp.199-204, 2014.

A. Neumaier, Taylor forms -use and limits. Reliable Computing, 2003.

B. Nilsson, Guarding art galleries; methods for mobile guards, 1995.

J. Nocedal and S. J. Wright, Numerical Optimization, 2000.

T. Oksanen and A. Visala, Coverage path planning algorithms for agricultural field machines, Journal of Field Robotics, vol.26, issue.8, pp.651-668, 2009.

O. Joseph and . Rourke, Art gallery theorems and algorithms, vol.57, 1987.

A. Peidró, Ó. Reinoso, A. Gil, J. María-marín, L. Payá et al., Calculation of the boundaries and barriers of the workspace of a redundant serial-parallel robot using the inverse kinematics, Proceedings of the 13th International Conference on Informatics in Control, Automation and Robotics, pp.412-420, 2016.

J. Rastegar, Generation of manipulator workspace boundary geometry using the monte carlo method and interactive computer graphics, Journal of mechanical design, vol.112, issue.3, pp.452-454, 1990.

T. R. Ren, N. M. Kwok, D. K. Liu, and S. D. Huang, Path planning for a robotic arm sandblasting system, 2008 International Conference on Information and Automation, pp.1067-1072, 2008.

J. Sack and . An, Algorithm for decomposing simple rectilinear polygons into convex quadrilaterals, Proceedings of the 20th Allerton Conference on Communication, Control, and Computing, pp.64-74, 1982.

J. Sack and . Toussaint, A linear-time algorithm for decomposing rectilinear star-shaped polygons into convex quadrilaterals, Proceedings of the 19th Allerton Conference on Communication, Control, and Computing, pp.21-30, 1981.

J. Sack, T. Godfried, and . Toussaint, Guard placement in rectilinear polygons, Machine Intelligence and Pattern Recognition, vol.6, pp.153-175, 1988.

G. Safak, The art-gallery problem: A survey and an extension. Skolan för datavetenskap och kommunikation, Kungliga Tekniska högskolan, 2009.

K. Schäcke, On the kronecker product, 2013.

J. Peter and . Schwartz, Constraint optimization literature review, 2015.

W. Sheng, A General Framework for Automatic CAD-Guided Tool Planning for Surface Manufacturing, Proceedings of the 2003 IEEE International Conference on Robotics {&} Automation, pp.3504-3509, 2003.

W. Sheng, N. Xi, M. Song, Y. Chen, and P. Macneille, Automated CADGuided Robot Path Planning for Spray Painting of Compound Surfaces Ford Motor Company, Intelligent Robots and Systems, pp.1918-1923, 2000.

W. Sheng, H. Chen, and N. Xi, Tool Path Planning for Compound Surfaces in Spray Forming Processes, IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, vol.2, issue.3, pp.240-249, 2005.

M. Shiomi, K. Kamei, T. Kondo, T. Miyashita, and N. Hagita, Robotic service coordination for elderly people and caregivers with ubiquitous network robot platform, Advanced Robotics and its Social Impacts (ARSO), pp.57-62, 2013.

F. Shkurti, A. Xu, M. Meghjani, J. Higuera, Y. Girdhar et al., Multidomain monitoring of marine environments using a heterogeneous robot team, Intelligent Robots and Systems (IROS), 2012 IEEE/RSJ International Conference on, pp.1747-1753

, IEEE, 2012.

, Optimum docking of an unmanned underwater vehicle for high dexterity manipulation, Panagiotis Sotiropoulos, Nikos Aspragathos, and Fivos Andritsos, vol.38, pp.48-56, 2011.

P. Sotiropoulos, N. Tosi, F. Andritsos, and F. Geffard, Optimal docking pose and tactile hook-localisation strategy for auv intervention: The difis deployment case, Ocean Engineering, vol.46, pp.33-45, 2012.

M. Srinivas and L. M. Patnaik, Genetic algorithms: a survey, Computer, vol.27, issue.6, pp.17-26, 1994.

V. Stahl, Interval methods for bounding the range of polynomials and solving systems of nonlinear equations. na, 1995.

S. H. Suh, I. K. Woo, and S. K. Noh, Development of an automatic trajectory planning system (atps) for spray painting robots, vol.3, pp.1948-1955, 1991.

Y. Tang and W. Chen, Surface modeling of workpiece and tool trajectory planning for spray painting robot, PLoS ONE, vol.10, issue.5, pp.1-9, 2015.

N. Tay, A. A. Saputra, J. Botzheim, and N. Kubota, Service robot planning via solving constraint satisfaction problem, ROBOMECH Journal, vol.3, issue.1, p.17, 2016.

G. Wing-keung-to, . Paul, M. Ngai, D. Kwok, and . Liu, An efficient trajectory planning approach for autonomous robots in complex bridge environments, International Journal of Computer Aided Engineering and Technology, vol.1, issue.2, pp.185-208, 2009.

Y. C. Tsai and A. H. Soni, An algorithm for the workspace of a general nr robot, Journal of Mechanisms, Transmissions, and Automation in Design, vol.105, issue.1, pp.52-57, 1983.

N. Underhaug, Power and productivity for a better world, 2000.

N. Vahrenkamp, T. Asfour, and R. Dillmann, Robot placement based on reachability inversion, Robotics and Automation (ICRA), pp.1970-1975, 2013.

G. , C. Vosniakos, and E. Matsas, Improving feasibility of robotic milling through robot placement optimisation. Robotics and Computer-Integrated Manufacturing, vol.26, pp.517-525, 2010.

A. Wächter, T. Lorenz, and . Biegler, On the implementation of a primal-dual interior point filter line search algorithm for large-scale nonlinear programming, Mathematical Programming, vol.106, pp.22-57, 2006.

L. Wang, M. Liu, and M. Meng, Towards cloud robotic system: A case study of online co-localization for fair resource competence, Robotics and Biomimetics (ROBIO), 2012 IEEE International Conference on, pp.2132-2137, 2012.

L. Wang, M. Liu, Q. Max, R. Meng, and . Siegwart, Towards real-time multi-sensor information retrieval in cloud robotic system, Multisensor Fusion and Integration for Intelligent Systems (MFI), 2012 IEEE Conference on, pp.21-26, 2012.

J. Wu, Uncertainty analysis and optimization by using the orthogonal polynomials, 2015.

W. Xia, C. Wei, and X. Liao, Surface segmentation based intelligent trajectory planning and control modeling for spray painting, 2009 International Conference on Mechatronics and Automation, pp.4958-4963, 2009.

D. Yang and . Lee, On the workspace of mechanical manipulators, Transmissions, and Automation in Design, vol.105, issue.1, pp.62-69, 1983.

J. Yang, W. Yu, J. Kim, and K. , On the placement of openloop robotic manipulators for reachability. Mechanism and Machine Theory, vol.44, pp.671-684, 2009.

M. Yokoo and K. Hirayama, Algorithms for distributed constraint satisfaction: A review, Autonomous Agents and Multi-Agent Systems, vol.3, issue.2, pp.185-207, 2000.

Q. Yu, G. Wang, and K. Chen, A Robotic Spraying Path Generation Algorithm for Free form Surface Based on Constant Coating Overlapping Width, The 5th Annual IEEE International Conference on Cyber Technology in Automation, Control and Intelligent Systems, pp.1045-1049, 2015.

F. Zacharias, C. Borst, and G. Hirzinger, Capturing robot workspace structure: representing robot capabilities. In Intelligent Robots and Systems, 2007.

, IEEE/RSJ International Conference on, pp.3229-3236, 2007.

F. Zacharias, W. Sepp, C. Borst, and G. Hirzinger, Using a model of the reachable workspace to position mobile manipulators for 3-d trajectories, Humanoid Robots, 2009. Humanoids 2009. 9th IEEE-RAS International Conference on, pp.55-61

, IEEE, 2009.

Y. Zeng, X. Wu, and J. Cao, Research and implementation of hungarian method based on the structure index reduction for dae systems, Journal of Algorithms & Computational Technology, vol.8, issue.2, pp.219-231, 2014.

J. Zhao, R. Yoshida, S. Ching-samson, D. Cheung, and . Haws, Approximate techniques in solving optimal camera placement problems, International Journal of Distributed Sensor Networks, vol.9, issue.11, p.241913, 2013.

C. Zhou and Y. Ceng, Meridian trajectory optimization of spray painting robot for spherical surface, Machinery Design & Manufacture, vol.11, pp.130-132, 2010.