B. K. Bose, Power electronics and motor drives recent progress and perspective, J] IEEE Transactions on Industrial Electronics, vol.56, issue.2, pp.581-588, 2009.

E. Labouré, Présentation activités Intégration, 2015.

G. Bower, C. Rogan, J. Kozlowski, and M. Zugger, SiC Power Electronics Packaging Prognostics, IEEE Aerospace Conference, 2008.

B. S. Passmore and A. B. Lostetter, A review of SiC power module packaging technologies: Attaches, interconnections, and advanced heat transfer, IEEE International Workshop On Integrated Power Packaging, 2017.

A. Imakiire, K. Nakamura, H. Tanabe, H. Kaisyakuji, T. Kubo et al., Investigation of prototype SiC power module structure for low inductance and high heat operation, IEEE International Workshop On Integrated Power Packaging, 2017.

P. Ning, T. G. Lei, F. Wang, G. Lu, K. D. Ngo et al., A novel high-temperature planar package for SiC multichip phase-leg power module, vol.25, pp.2059-2067, 2010.

B. Mcpherson, B. Mcgee, D. Simco, K. Olejniczak, and B. Passmore, Direct liquid cooling of high performance Silicon Carbide (SiC) power modules, IEEE International Workshop On Integrated Power Packaging, 2017.

K. Boutros, R. Chu, and B. Hughes, Recent advances in GaN power electronics, Proceedings of the IEEE 2013 Custom Integrated Circuits Conference, 2013.

M. Ishida, Y. Uemoto, T. Ueda, T. Tanaka, and D. Ueda, GaN power switching devices, Electronics Conference (IPEC), 2010.

C. Yu, Technlogies for integrated power converters, in GeePs. 2016, Technologies for integrated power converters, p.144

S. Kouro, M. Malinowski, K. Gopakumar, J. Pou, L. G. Franquelo et al., Recent advances and industrial applications of multilevel converters, J] IEEE Transactions on industrial electronics, vol.57, issue.8, pp.2553-2580, 2010.

C. Raynaud, D. Tournier, H. Morel, and D. Planson, Comparison of high voltage and high temperature performances of wide bandgap semiconductors for vertical power devices, J] Diamond and Related Materials, vol.19, issue.1, pp.1-6, 2010.
URL : https://hal.archives-ouvertes.fr/hal-02186368

L. M. Tolbert, B. Ozpineci, S. K. Islam, and M. S. Chinthavali, Wide bandgap semiconductors for utility applications, J] semiconductors, vol.1, 2003.

J. Millan, P. Godignon, X. Perpina, A. Pérez-tomás, and J. Rebollo, A survey of wide bandgap power semiconductor devices, IEEE transactions on Power Electronics, vol.29, pp.2155-2163, 2014.

M. Electronics and G. Power, Devices: Potential, Benefits, and Keys to Successful Use

U. K. Mishra, P. Parikh, and Y. Wu, AlGaN/GaN HEMTs-an overview of device operation and applications, J] Proceedings of the IEEE, vol.90, issue.6, pp.1022-1031, 2002.

Y. Wu, D. Kapolnek, J. P. Ibbetson, P. Parikh, B. P. Keller et al., Very-high power density AlGaN/GaN HEMTs, J] IEEE Transactions on Electron Devices, vol.48, issue.3, pp.586-590, 2001.

Y. Chenjiang, E. Laboure, and C. Buttay, Thermal management of lateral GaN power devices, IEEE International Workshop on, 2015.

H. Xiucheng, L. Qiang, L. Zhengyang, and F. C. Lee, Analytical loss model of high voltage GaN HEMT in cascode configuration, p.2013, 2013.

H. Choi, Overview of silicon carbide power devices

Z. Chen, D. Boroyevich, R. Burgos, and F. Wang, Characterization and modeling of 1.2 kv, 20 A SiC MOSFETs, IEEE, 2009.

S. Infineon and . Schottky-diode, , 2012.

S. Kouro, J. Rodriguez, B. Wu, S. Bernet, and M. Perez, Powering the future of industry: High-power adjustable speed drive topologies, vol.18, pp.26-39, 2012.

J. Lai and F. Z. Peng, Multilevel converters-a new breed of power converters, Thirtieth IAS Annual Meeting, IAS'95., Conference Record of the 1995 IEEE, 1995.

R. Klug and N. Klaassen, High power medium voltage drives-innovations, portfolio, trends, European Conference on, 2005.

L. G. Franquelo, J. Rodriguez, J. I. Leon, S. Kouro, R. Portillo et al., The age of multilevel converters arrives, vol.2, 2008.

J. Rodriguez, L. G. Franquelo, S. Kouro, J. I. Leon, R. C. Portillo et al., Multilevel converters: An enabling technology for high-power applications, J] Proceedings of the IEEE, vol.97, issue.11, pp.1786-1817, 2009.

J. Rodríguez, S. Bernet, B. Wu, J. O. Pontt, and S. Kouro, Multilevel voltage-source-converter topologies for industrial medium-voltage drives, J] IEEE Transactions on industrial electronics, vol.54, issue.6, pp.2930-2945, 2007.

B. Wu and M. Narimani, High-power converters and AC drives, vol.59, 2017.

R. Vargas, U. Ammann, and J. Rodriguez, Predictive approach to increase efficiency and reduce switching losses on matrix converters, J] IEEE Transactions on Power Electronics, vol.24, issue.4, pp.894-902, 2009.

J. Rodriguez, J. Pontt, C. A. Silva, P. Correa, P. Lezana et al., Predictive current control of a voltage source inverter, J] IEEE transactions on industrial electronics, vol.54, issue.1, pp.495-503, 2007.

K. Papastergiou, P. Wheeler, and J. Clare, Comparison of losses in multilevel converters for aerospace applications, Power Electronics Specialists Conference, 2008.

. Dynexsemi, Calculating power losses in an IGBT Module, 2014.

M. Electronics and P. Management, Heat Challenges Solved

R. M. Cuzner, Power electronics packaging challenges for future warship applications, IEEE International Workshop on Integrated Power Packaging (IWIPP), 2015.

C. Yu, C. Buttay, E. Laboure, V. Bley, and C. Combettes, Highly intergrated power electronic converters using active devices embedded in printed-circuit board, p.4

/. Micro and . Nano-electronics, packaging and assembling, design and manufacturing forum MiNaPAD, p.1197043, 2015.

M. Romig and O. Lopez, 3D packaging advancements drive performance, power and density in power devices, White Paper by Texas Instruments

C. Buttay, Modules et boîtiers de puissance (Packaging). 2010: ARTICLE TECHNIQUES DE L'INGENIEUR

, Wikipedia. Thermal expansion

E. Waffenschmidt, B. Ackermann, and J. A. Ferreira, Design method and material technologies for passives in printed circuit board embedded circuits, J] IEEE Transactions on Power Electronics, vol.20, issue.3, pp.576-584, 2005.

J. Shin, C. Cha, S. Cho, J. Kim, N. M. Jokerst et al., FR4 printed circuit board design for Giga-bits embedded optical interconnect applications, Electronic Components and Technology Conference, 2004.

C. Yu, C. Buttay, E. Labouré, V. Bley, C. Combettes et al., Comparison of topside contact layouts for power dies embedded in PCB, System-Integration Technology Conference (ESTC), 2016.
URL : https://hal.archives-ouvertes.fr/hal-01373042

A. Lidow and D. Reusch, A new generation of power semiconductor packaging paves the way for higher efficiency power conversion, IEEE International Workshop on Integrated Power Packaging (IWIPP), 2015.

H. Greve and F. P. Mccluskey, Thermal conductivity of Cu-Sn transient liquid phase sintered interconnects for high power density modules, IEEE International Workshop On Integrated Power Packaging, 2017.

L. Codecasa, Canonical forms of one-port Passive Distributed thermal networks, Transactions on Components and Packaging Technologies, vol.28, pp.5-13, 2005.

L. Codecasa, D. D'amore, and P. Maffezzoni, Canonical forms of multi-port dynamic thermal networks, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00171391

L. Codecasa, Structure Function Representation of Multidirectional Heat-Flows, Transactions on Components and Packaging Technologies, vol.30, pp.643-652, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00189482

E. Laboure, Cours Intégration_Système d'énergie embarquée, 2017.

A. Raciti, D. Cristaldi, G. Greco, G. Vinci, and G. Bazzano, Electrothermal PSpice Modeling and Simulation of Power Modules, J] IEEE Transactions on Industrial Electronics, vol.62, issue.10, pp.6260-6271, 2015.

J. P. Holman and H. Transfer, , 1998.

S. Tsuda, M. Shimizu, F. Iguchi, and H. Yugami, Thermal Management Technique Using Control of Thermal Radiation Spectrum for Encapsulated Electronic Devices, J] IEEE Transactions on Components, Packaging and Manufacturing Technology, vol.5, issue.7, pp.971-979, 2015.

H. F. Hamann, A. Weger, J. A. Lacey, Z. Hu, P. Bose et al., Hotspot-Limited Microprocessors: Direct Temperature and Power Distribution Measurements, J] IEEE Journal of Solid-State Circuits, vol.42, issue.1, pp.56-65, 2007.

M. Zhang, Research and implement of thermocouple sensor and microcontroller interface, Multimedia Technology (ICMT), 2010 International Conference on, 2010.

T. Wikipedia,

. Wikipedia, Resistance thermometer

Y. Avenas, L. Dupont, and Z. Khatir, Temperature Measurement of Power Semiconductor Devices by Thermo-Sensitive Electrical Parameters—A Review, IEEE Transactions on, vol.27, issue.6, pp.3081-3092, 2012.

D. L. Blackburn, Temperature measurements of semiconductor devices -a review, Semiconductor Thermal Measurement and Management Symposium, 2004.

C. Xiao, G. Chen, and W. G. , Overview of Power Loss Measurement Techniques in Power Electronics Systems, J] IEEE Transactions on Industry Applications, vol.43, issue.3, pp.657-664, 2007.

. Ansys and . Ansys,

I. I. Ag, SOLIDIS-ise 6.0, 2001.

. Edf and . Salome,

, Introduction to COMSOL Multiphysics 5

. Mentor and . Flotherm,

D. Cottet, U. Drofenik, and J. M. Meyer, A systematic design approach to thermal-electrical power electronics integration, 2nd Electronics System-Integration Technology Conference, 2008.

T. Kojima, Y. Yamada, Y. Nishibe, and K. Torii, Novel RC Compact Thermal Model of HV Inverter Module for Electro-Thermal Coupling Simulation, 2007.

A. S. Bahman, K. Ma, and F. Blaabjerg, General 3D lumped thermal model with various boundary conditions for high power IGBT modules, IEEE Applied Power Electronics Conference and Exposition, 2016.

J. Reichl, J. M. Ortiz-rodríguez, A. Hefner, and J. S. Lai, 3-D Thermal Component Model for Electrothermal Analysis of Multichip Power Modules With Experimental Validation, J] IEEE Transactions on Power Electronics, vol.30, issue.6, pp.3300-3308, 2015.

. Synopsys and . Saber,

. Pspice, Introduction to PSPICE

. Mathworks and . Matlab,

. Mentor, T3Ster Introduction

Y. Chan-su, P. Malberti, M. Ciappa, and W. Fichtner, Thermal component model for electrothermal analysis of IGBT module systems, J] IEEE Transactions on Advanced Packaging, vol.24, issue.3, pp.401-406, 2001.

B. J. Baliga, Analytical Modeling of IGBTs: Challenges and Solutions, J] IEEE Transactions on Electron Devices, vol.60, issue.2, pp.535-543, 2013.

A. P. Pai, T. Reiter, and M. Maerz, A New Behavioral Model for Accurate Loss Calculations in Power Semiconductors, 2016.

L. K. Mestha and P. D. Evans, Analysis of on-state losses in PWM inverters, IEE Proceedings B -Electric Power Applications, vol.136, pp.189-195, 1989.

J. W. Kolar, H. Ertl, and F. C. Zach, Influence of the modulation method on the conduction and switching losses of a PWM converter system, J] IEEE Transactions on Industry Applications, vol.27, issue.6, pp.1063-1075, 1991.

F. Casanellas, Losses in PWM inverters using IGBTs, IEE Proceedings -Electric Power Applications, vol.141, pp.235-239, 1994.

F. Blaabjerg, U. Jaeger, and S. Munk-nielsen, Power losses in PWM-VSI inverter using NPT or PT IGBT devices, J] IEEE Transactions on Power Electronics, vol.10, issue.3, pp.358-367, 1995.

F. Blaabjerg, J. K. Pedersen, S. Sigurjonsson, and A. Elkjaer, An extended model of power losses in hard-switched IGBT-inverters, Industry Applications Conference, 1996. ThirtyFirst IAS Annual Meeting, IAS '96., Conference Record of the 1996 IEEE, 1996.

M. H. Bierhoff and F. W. Fuchs, Semiconductor losses in voltage source and current source IGBT converters based on analytical derivation, IEEE 35th Annual Power Electronics Specialists Conference, 2004.

S. Dieckerhoff, S. Bernet, and D. Krug, Power loss-oriented evaluation of high voltage IGBTs and multilevel converters in transformerless traction applications, J] IEEE Transactions on Power Electronics, vol.20, issue.6, pp.1328-1336, 2005.

V. Ivakhno, V. Z. Volodymyr, and O. Ilina, Estimation of Semiconductor Switching Losses under Hard Switching using Matlab/Simulink Subsystem, in Electrical, Control and Communication Engineering, p.20, 2013.

, Application Note 5SYA2053-04, ABB, 2013.

U. N. Wintrich, W. Tursky, and T. Reimann, Application Manual Power Semiconductors, 2011.

A. P. Pai, T. Reiter, O. Vodyakho, I. Yoo, and M. Maerz, A calorimetrie method for measuring power losses in power semiconductor modules, 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe, 2017.

S. Lefebvre, F. Costa, and F. Miserey, Influence of the gate internal impedance on losses in a power MOS transistor switching at a high frequency in the ZVS mode, J] IEEE Transactions on Power Electronics, vol.17, issue.1, pp.33-39, 2002.

C. Chen, D. Labrousse, S. Lefebvre, H. Morel, C. Buttay et al., Power Loss Estimation in SiC Power BJTs, Europe, 2014.

D. Barlini, M. Ciappa, A. Castellazzi, M. Mermet-guyennet, and W. Fichtner, New technique for the measurement of the static and of the transient junction temperature in IGBT devices under operating conditions, J] Microelectronics Reliability, vol.46, issue.9, pp.1772-1777, 2006.

C. Jiang, B. Lei, H. Teng, and H. K. Bai, The power-loss analysis and efficiency maximization of a silicon-carbide MOSFET based three-phase 10kW bi-directional EV charger using variable-DC-bus control, IEEE Energy Conversion Congress and Exposition, 2016.

. Tektronix,

N. Instruments, High-speed probes

D. J. Patterson, An efficiency optimized controller for a brushless DC machine, and loss measurement using a simple calorimetric technique, Power Electronics Specialists Conference, 1995. PESC '95 Record, 1995.

S. Sridhar, R. M. Wolf, and W. G. , An accurate experimental apparatus for measuring losses in magnetic components, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370), 1999.

T. G. Imre, W. A. Cronje, J. D. Wyk, J. A. Ferreira, and W. Mors, An experimental method for low power loss determination, IEEE Africon. 5th Africon Conference in Africa (Cat. No.99CH36342), 1999.

J. K. Bowman, R. F. Cascio, M. P. Sayani, and T. G. Wilson, A calorimetric method for measurement of total loss in a power transformer, Power Electronics Specialists Conference, 1991. PESC '91 Record, 1991.

D. K. Conroy, G. F. Pierce, and P. R. Troyk, Measurement techniques for the design of highfrequency SMPS transformers, Conference Proceedings, 1988.

J. P. Keradec, Validating the power loss model of a transformer by measurement: the price to pay, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting, 2002.

B. Seguin, J. P. Gosse, A. Sylvestre, P. Fouassier, and J. P. Ferrieux, Calorimetric apparatus for measurement of power losses in capacitors, Where Instrumentation is Going, 1998.

N. P. Schouten, C. Y. Leong, P. D. Malliband, and R. A. Mcmahon, Implementation and calorimetric verification of models for IGBT-based inverters for small drives, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003.

M. M. Carpita and L. Puglisi, A differential calorimetric system for evaluation of losses in static power converters, J] International Journal of Energy Systems, vol.9, issue.2, 1989.

P. D. Malliband, D. R. Carter, B. M. Gordon, and R. A. Mcmahon, Design of a doublejacketed, closed type calorimeter for direct measurement of motor losses, Seventh International Conference on Power Electronics and Variable Speed Drives, 1998.

P. D. Malliband, N. P. Schouten, and R. A. Mcmahon, Precision calorimetry for the accurate measurement of inverter losses, The Fifth International Conference on Power Electronics and Drive Systems, 2003.

D. R. Turner, K. J. Binns, B. N. Shamsadeen, and D. F. Warne, Accurate measurement of induction motor losses using balance calorimeter, IEE Proceedings B -Electric Power Applications, vol.138, pp.233-242, 1991.

K. J. Bradley, A. Ferrah, R. Magill, J. C. Clare, P. Wheeler et al., Improvements to precision measurement of stray load loss by calorimeter, Ninth International Conference on Electrical Machines and Drives, 1999.

P. Mcleod, K. J. Bradley, A. Ferrah, R. Magill, J. G. Clare et al., High precision calorimetry for the measurement of the efficiency of induction motors, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242), 1998.

B. Szabados and A. Mihalcea, Design and implementation of a calorimetric measurement facility for determining losses in electrical machines, J] IEEE Transactions on Instrumentation and Measurement, vol.51, issue.5, pp.902-907, 2002.

E. Ritchie, J. K. Pedersen, F. Blaabjerg, and P. Hansen, Calorimetric measuring systems, J] IEEE Industry Applications Magazine, vol.10, issue.3, pp.70-78, 2004.

D. Christen, U. Badstuebner, J. Biela, and J. W. Kolar, Calorimetric Power Loss Measurement for Highly Efficient Converters, Electronics Conference (IPEC), 2010.

X. Chucheng, C. Gang, and W. G. , Overview of power loss measurement techniques in power electronics systems, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting, 2002.

S. Weier, M. A. Shafi, and R. A. Mcmahon, Precision Calorimetry for the Accurate Measurement of Losses in Power Electronic Devices, Industry Applications Society Annual Meeting, 2008.

C. Gang, X. Chucheng, and W. G. , An apparatus for loss measurement of integrated power electronics modules: design and analysis, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting, 2002.

P. Wolfs and L. Quan, Precision calorimetry for power loss measurement of a very low power maximum power point tracker, 2007.

L. Aarniovuori, A. Kosonen, P. Sillanpää, and M. Niemelä, High-Power Solar Inverter Efficiency Measurements by Calorimetric and Electric Methods, J] IEEE Transactions on Power Electronics, vol.28, issue.6, pp.2798-2805, 2013.

A. Jalilian, V. J. Gosbell, P. Cooper, and B. S. Perera, Double-chamber calorimeter, a new approach to measure induction motor harmonic losses, IEEE International Electric Machines and Drives Conference Record, 1997.

W. Cao, K. J. Bradley, and A. Ferrah, Development of a High-Precision Calorimeter for Measuring Power Loss in Electrical Machines, J] IEEE Transactions on Instrumentation and Measurement, vol.58, issue.3, pp.570-577, 2009.

C. B. Anne-sophie-podlejski, D. Bergogne, J. Morand, C. Vollaire, and A. Bréard, Mesure précise des pertes dans un module d'électronique de puissance par une méthode calorimétrique, 2014.

P. Wang, P. Mccluskey, and A. Bar-cohen, Hybrid Solid-and Liquid-Cooling Solution for Isothermalization of Insulated Gate Bipolar Transistor Power Electronic Devices, J] IEEE Transactions on Components, Packaging and Manufacturing Technology, vol.3, issue.4, pp.601-611, 2013.

M. Marz, Thermal management in high-density power converters, IEEE International Conference on Industrial Technology, 2003.

A. L. William-morrow-kays, Compact Heat Exchangers, 1984.

S. S. Kang, Advanced Cooling for Power Electronics, 2012 7th International Conference on, 2012.

S. S. Kim, J. A. Weibel, T. S. Fisher, and S. V. Garimella, Thermal Performance of Carbon Nanotube Enhanced Vapor Chamber Wicks, pp.417-424, 2010.

D. A. Reay and P. A. Kew, 3 -Heat Pipe Components and Materials, in Heat Pipes (Fifth Edition), pp.107-145, 2007.

J. Schulz-harder, Review on Highly Integrated Solutions for Power Electronic Devices, 5th International Conference on Integrated Power Electronics Systems, 2008.

J. Schulz-harder, K. Exel, and A. Meyer, Direct Liquid Cooling of Power Electronics Devices, 4th International Conference on Integrated Power Systems, 2006.

. Lytron,

T. Steiner and R. Sittig, IGBT module setup with integrated micro-heat sinks, 12th International Symposium on Power Semiconductor Devices & ICs. Proceedings (Cat. No.00CH37094), 2000.

V. Muthu, C. K. Suan, D. A. Molligoda, P. Chatterjee, C. J. Gajanayake et al., Embedded thermal management solution for power electronics PCB using additive manufacturing, Asian Conference on Energy, Power and Transportation Electrification, 2017.

V. Semenyuk, Miniature Thermoelectric Modules with Increased Cooling Power, 25th International Conference on Thermoelectrics, 2006.

A. Bar-cohen and P. Wang, On-Chip Thermal Management and Hot-Spot Remediation, pp.349-429, 2010.

B. Yang, P. Wang, and A. Bar-cohen, Mini-Contact Enhanced Thermoelectric Cooling of Hot Spots in High Power Devices, J] IEEE Transactions on Components and Packaging Technologies, vol.30, issue.3, pp.432-438, 2007.

P. Wang and A. Bar-cohen, Self-Cooling on Germanium Chip, J] IEEE Transactions on Components, Packaging and Manufacturing Technology, vol.1, issue.5, pp.705-713, 2011.

A. L. Beng, G. S. Hong, and M. Devarajan, Optimization of thermal vias for thermal resistance in FR-4 PCBs, Quality Electronic Design (ASQED), 2013 5th Asia Symposium on, 2013.

S. Lee, T. F. Lemczyk, and M. M. Yovanovich, Analysis of thermal vias in high density interconnect technology, Semiconductor Thermal Measurement and Management Symposium, 1992. SEMI-THERM VIII, 1992.

R. S. Li, Optimization of thermal via design parameters based on an analytical thermal resistance model, Thermal and Thermomechanical Phenomena in Electronic Systems, 1998. ITHERM '98. The Sixth Intersociety Conference on, 1998.

A. D. Kraus, Cooling electronic equipment, 1965.

T. Abbas, K. Abd_elsalam, and K. Khodairy, CPU thermal management of personal and notebook computer (Transient study), Thermal Issues in Emerging Technologies Theory and Applications (ThETA), 2010.

A. Nguyen, L. Wang, M. Schauer, and J. Torgerson, Extended temperature tuning of an ultraviolet diode laser for trapping and cooling single Yb+ ions, J] Review of Scientific Instruments, vol.81, issue.5, p.53110, 2010.

K. K. Nandini and M. , Peltier based cabinet cooling system using heat pipe and liquid based heat sink, National Conference on Challenges in, 2013.

Y. Yao, Z. Chen, J. Huang, X. Wen, and J. Liu, Research on thermal cycle system for realtime PCR instrument based on equivalent circuit model, 2010 IEEE International Conference on, 2010.

J. Jiang, G. V. Kaigala, H. J. Marquez, and C. J. Backhouse, Nonlinear controller designs for thermal management in PCR amplification, J] IEEE Transactions on Control Systems Technology, vol.20, issue.1, pp.11-30, 2012.

M. K. Russel, D. Ewing, and C. Y. Ching, Numerical and Experimental Study of a Hybrid Thermoelectric Cooler Thermal Management System for Electronic Cooling, IEEE Transactions on Components, Packaging and Manufacturing Technology, vol.2, pp.1608-1616, 2012.

R. Simons, M. Ellsworth, and R. Chu, An assessment of module cooling enhancement with thermoelectric coolers, International Mechanical Engineering Congress and Exposition, 2003.

M. Han, Y. Jin, D. Lee, and S. Kim, Thermoelectric Properties of Bi2Te3: CuI and the Effect of Its Doping with Pb Atoms, J] Materials, vol.10, issue.11, p.1235, 2017.

J. Martin, Apparatus for the high temperature measurement of the Seebeck coefficient in thermoelectric materials, J] Review of Scientific Instruments, vol.83, issue.6, p.65101, 2012.

F. Corporation, Thermoelectric Technical Reference Guide

S. B. Riffat and X. Ma, Thermoelectrics: a review of present and potential applications, J] Applied thermal engineering, vol.23, issue.8, pp.913-935, 2003.

S. Lineykin and S. Ben-yaakov, Analysis of thermoelectric coolers by a spice-compatible equivalent-circuit model, J] IEEE Power Electronics Letters, vol.3, issue.2, pp.63-66, 2005.

H. Y. Zhang, Y. C. Mui, and M. Tarin, Analysis of thermoelectric cooler performance for high power electronic packages, J] Applied Thermal Engineering, vol.30, issue.6, pp.561-568, 2010.

R. Palacios, A. Arenas, R. Pecharroman, and F. Pagola, Analytical procedure to obtain internal parameters from performance curves of commercial thermoelectric modules, J] Applied Thermal Engineering, vol.29, pp.3501-3505, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00573475

M. Russel, D. Ewing, and C. Ching, Characterization of a thermoelectric cooler based thermal management system under different operating conditions, J] Applied Thermal Engineering, vol.50, issue.1, pp.652-659, 2013.

M. Russel, D. Ewing, and C. Ching, A hybrid thermoelectric cooler thermal management system for electronic packaging, Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2010 12th IEEE Intersociety Conference on, 2010.

M. Hodes, On one-dimensional analysis of thermoelectric modules (TEMs), Transactions on Components and Packaging Technologies, vol.28, pp.218-229, 2005.

L. E. Bell, Cooling, heating, generating power, and recovering waste heat with thermoelectric systems, J] Science, vol.321, issue.5895, pp.1457-1461, 2008.

J. Bierschenk and D. Johnson, Extending the limits of air cooling with thermoelectrically enhanced heat sinks, Thermal and Thermomechanical Phenomena in Electronic Systems, 2004. ITHERM'04. The Ninth Intersociety Conference on, 2004.

M. Cosnier, G. Fraisse, and L. Luo, An experimental and numerical study of a thermoelectric air-cooling and air-heating system, J] International Journal of Refrigeration, vol.31, issue.6, pp.1051-1062, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00529542

P. Panasonic and . Pgs, Graphite Sheet Data Sheet

L. Fältström, Graphite sheets and graphite gap pads used as thermal interface materials: A thermal and mechanical evaluation, 2014.

. Flir,

T. Wikipedia,

, Durable Type K& T Exposed Welded Tip Thermocouples

J. Olson, PCB Fabrication Processes Brief Introduction, 2014.

E. K. Yung, L. T. Romankiw, and R. C. Alkire, Plating of Copper into Through-Holes and Vias, J] Journal of the Electrochemical Society, vol.136, issue.1, pp.206-215, 1989.

F. Christiaens, E. Beyne, and J. Berghmans, Modelling of thermal vias in thin film multichip modules, Thermal Phenomena in Electronic Systems, 1994. I-THERM IV. Concurrent Engineering and Thermal Phenomena., InterSociety Conference on, 1994.

. Curamik,

. Bourns, PWR163 Series Power Resistor

Z. Qi, B. H. Meyer, W. Huang, R. J. Ribando, K. Skadron et al., Temperature-topower mapping, IEEE International Conference on Computer Design, 2010.

L. Gemmer and S. B. Nielsen, Three-dimensional inverse modelling of the thermal structure and implications for lithospheric strength in Denmark and adjacent areas of Northwest Europe, J] Geophysical Journal International, vol.147, issue.1, pp.141-154, 2001.

H. Vansompel, A. Yarantseva, P. Sergeant, and G. Crevecoeur, Thermal parameter identification of an electrical machine using inverse modelling and non-collocated thermal sensors, 2017.

D. G. Nair and A. Arkkio, Inverse Thermal Modeling to Determine Power Losses in Induction Motor, J] IEEE Transactions on Magnetics, vol.53, issue.6, pp.1-4, 2017.

, COMPEL -The international journal for computation and mathematics in electrical and electronic engineering, vol.31, pp.996-1006, 2012.

E. Pasco and . Transfer-thermoelectric,

G. Hetsroni, A. Mosyak, Z. Segal, and G. Ziskind, A uniform temperature heat sink for cooling of electronic devices, J] International Journal of Heat and Mass Transfer, vol.45, issue.16, pp.3275-3286, 2002.

C. Inc, , vol.39

C. Inc, , vol.30

C. Inc, , vol.60

H. Zhang, Y. Mui, and M. Tarin, Analysis of thermoelectric cooler performance for high power electronic packages, J] Applied thermal engineering, pp.561-568, 2010.

D. Schweitzer and L. Chen, Heat spreading revisited-effective heat spreading angle, Thermal Measurement, Modeling & Management Symposium (SEMI-THERM), 2015.

K. Fukutani and A. Shakouri, Design of bulk thermoelectric modules for integrated circuit thermal management, IEEE Transactions on Components and Packaging Technologies, vol.29, pp.750-757, 2006.

, TolFun',0.5e-2, 'MaxFunEvals',100000, vol.10000

. Mat=zeros,

, %,options) Mat(i)=Pin

, Loop times');ylabel

, Loop random value','Mean value of loop','Real input value') title('Simulation loop with noises

, Errmax_min=max(Mat)-min(Mat)

, 1.245 1.494 1.742 1.991 2.240 2.489

, % %One thousand loop times with random noises n=1000

, TolFun',0.5e-3,'MaxFunEvals',10000000, vol.10000

. Mat2=zeros,

(. Pin=fminsearch and . @mylsq_two, , vol.0

. Mat2, ii)=Pin; %save loop results in matrix Mat alpha=

. Mat2=zeros,

. Qin=fminsearch,

. Mat2, ii)=Qin; %save loop results in matrix Mat end Pin_logP=Mat2(1,:);%Average value of first line of matrix Pin_loglambda=Mat2(2,:);%Average value of second line of matrix Pin_P=exp

. Pin_lambda=exp,

, Pmean_P=mean(Pin_P) Pmean_lambda=mean(Pin_lambda)

, Ermaxmin1=max(Pin_P)-min(Pin_P)%Error between Pin1max and Pin1min Ermaxmin2=max(Pin_lambda)-min(Pin_lambda)%Error between Pin2max and Pin2min

, ) plot(alpha,Pin_P

, Loop times');ylabel

, Real input value') title('Simulation loop with thermal noises') figure(2) plot(alpha,Pin_lambda, Loop random value

, Loop times');ylabel('\lambda_t_h(W/mK)')

, Loop random value','-Mean value of loop','-Real input value') title('Simulation loop with thermal noises

, %%Power and thermal conductivity predictions with 6 temperature measurement sensors %Inverse model with input power and variable thermal conductivity of PCB clear all

, %thickness from top surface of total structure to top surface of GaN, pp.1-8

, ln_lambda=log(lambda

. Qin=fminsearch,

. Mat2, ii)=Qin; %save loop results in matrix Mat %EXIT(ii)=EXITFLAG

, );%Average value of first line of matrix Pin_loglambda=Mat2(2,:);%Average value of second line of matrix Pin_P=exp

. Pin_lambda=exp,

. Pmean_p=mean,

. Pmean_lambda=mean,

, Ermaxmin1=max(Pin_P)-min(Pin_P)%Error between Pin1max and Pin1min Ermaxmin2=max(Pin_lambda)-min(Pin_lambda)%Error between Pin2max and Pin2min

, Loop times');ylabel

, Real input value') title('Simulation loop with thermal noises') figure(2) plot(alpha,Pin_lambda, Loop random value

, Loop times');ylabel('\lambda(W/mK)')

, Loop random value','-Mean value of loop','-Real input value') title('Simulation loop with thermal noises

, =myLsq_Pin_loglamta_6points(Qin) %Least square for calculating the error between measurement and modelling global dTmea_Pin_lamta

, Bruit=0.1*randn

%. Rand, ,5)-0.5)*0.01;%distributed noise with mean 0 and standard deviation, vol.1

. Coe_c=,

. Ln_dtmo_pin_lamta=coe_a+coe_b*qin-;-+coe_c*qin,

, Err=sum((dTmea_Pin_lamta-dTmo_Pin_lamta).^2)