;. F. Bueno-orovio, A. Palacios, C. Bueno-orovio, E. Castro, and . Zuazua, Continuous adjoint approach for the Spalart-Allmaras model in aerodynamic optimization, AIAA Journal, vol.45, issue.9, pp.2125-2139, 2007.

;. W. Sei, A. Symes, and . Sei, A note on consistency and adjointness for numerical schemes, 1995.

A. Tikhonov-;-v.-arsenin and A. Tikhonov, Solutions of ill-posed problems, 1977.

R. Abgrall, C. Dobrzynski, A. Froehly, ;. Alauzet, P. J. Frey et al., A method for computing curved meshes via the linear elasticity analogy, application to fluid dynamics problems, International Journal for Numerical Methods in Fluids, vol.76, issue.4, pp.592-623, 2007.
URL : https://hal.archives-ouvertes.fr/hal-01045103

F. Alauzet and A. Loseille, On the use of space filling curves for parallel anisotropic mesh adaptation, Proceedings of the 18th International Meshing Roundtable, pp.337-357, 2009.

F. Alauzet, Size gradation control of anisotropic meshes, Finite Elem. Anal. Des, vol.46, pp.181-202, 2010.

F. Alauzet and A. Loseille, High Order Sonic Boom Modeling by Adaptive Methods, J. Comp. Phys, vol.229, pp.561-593, 2010.
URL : https://hal.archives-ouvertes.fr/inria-00363206

F. Alauzet and M. Mehrenberger, P1-conservative solution interpolation on unstructured triangular meshes, Int. J. Numer. Meth. Engng, vol.84, issue.13, pp.1552-1588, 2010.
URL : https://hal.archives-ouvertes.fr/inria-00354509

F. Alauzet and G. Olivier, Extension of Metric-Based Anisotropic Mesh Adaptation to Time-Dependent Problems Involving Moving Geometries, 49th AIAA Aerospace Sciences Meeting and Exhibit, 2011.

F. Alauzet and G. Olivier, Extension of Metric-Based Anisotropic Mesh Adaptation to Time-Dependent Problems Involving Moving Geometries, 49th AIAA Aerospace Sciences Meeting, AIAA Paper 2011-0896, 2011.

F. Alauzet, Contributions aux méthodes numériques pour l'adaptation de maillage et le maillage mobile, Habilitationà Diriger des Recherches, 2012.

F. Alauzet, A changing-topology moving mesh technique for large displacements, Engineering with Computers, vol.30, issue.2, pp.175-200, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01114995

F. Alauzet and A. Loseille, A decade of progress on anisotropic mesh adaptation for Computational Fluid Dynamics, Comput. Aided Des, vol.72, pp.13-39, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01426159

G. Allaire-;-g.-allaire, A review of adjoint methods for sensitivity analysis, uncertainty quantification and optimization in numerical codes, vol.58, pp.33-36, 2007.

]. K. Anderson and V. Venkatakrishnan, Aerodynamic Design Optimization on Unstructured Grids with a Continuous Adjoint Formulation, AIAA 35'th Aerospace Sciences Meeting and Exhibit, 1997.

E. Arian and D. Salas, Admitting the Inadmissible: Adjoint Formulation for Incomplete Cost Functionals in Aerodynamic Optimization, ICASE, 1997.

M. Astorino, F. Chouly, and M. A. Fernández, Robin-based Semi-Implicit Coupling in Fluid-Structure Interaction: Stability Analysis and Numerics, SIAM J. Sci. Comput, vol.31, issue.6, pp.4041-4065, 2009.
URL : https://hal.archives-ouvertes.fr/inria-00361284

A. Stück, ;. Stück, F. Camelli, and R. Löhner, Adjoint-based design of shock mitigation devices. International journal for numerical methods in fluids, 2009.

;. T. Seny, V. Toulorge, B. Legat-j.-f.-remacle, J. Seny, . J. Lambrechts-;-m et al., An efficient parallel implementation of explicit multirate Runge-Kutta schemes for discontinuous Galerkin computations, Journal of Computational Physics, vol.256, pp.135-160, 1994.

T. J. Baker and P. Cavallo, Dynamic adaptation for deforming tetrahedral meshes, AIAA Journal, vol.19, pp.2699-3253, 1999.

R. E. Bank and R. K. Smith, A posteriori error estimate based on hierarchical bases, SIAM J. Numer. Anal, vol.30, pp.921-935, 1993.

N. Barral, Time-accurate anisotropic mesh adaptation for three-dimensional moving mesh problems, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01426156

J. Batina, Unsteady Euler Airfoil Solutions Using Unstructured Dynamic Meshes, AIAA Journal, vol.28, issue.8, pp.1381-1388, 1990.

P. Batten, N. Clarke, C. Lambert, and D. M. Causon, On the choice of wavespeeds for the HLLC Riemann solver, SIAM J. Sci. Comput, vol.18, issue.6, pp.1553-1570, 1997.

J. D. Baum, H. Luo, and R. Löhner, A New ALE Adaptive Unstructured Methodology for the Simulation of Moving Bodies, 32th AIAA Aerospace Sciences Meeting, 1994.

J. D. Baum, H. Luo, R. Löhner, C. Yang, D. Pelessone et al., 3D simulation of wind turbine rotors at full scale. Part II: Fluid-structure interaction modeling with composite blades, AIAA-96-0795, vol.65, pp.236-253, 1996.

R. Becker and R. Rannacher, A feed-back approach to error control in finite element methods: basic analysis and examples, East-West J. Numer. Math, vol.4, pp.237-264, 1996.
URL : https://hal.archives-ouvertes.fr/inria-00343044

A. Belme, Unsteady Aerodynamics and Adjoint Method, 2011.
URL : https://hal.archives-ouvertes.fr/tel-00671181

A. Belme, A. Dervieux, and F. Alauzet, Time Accurate Anisotropic Goal-Oriented Mesh Adaptation for Unsteady Flows, J. Comp. Phys, vol.231, issue.19, pp.6323-6348, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00940095

C. Bischof, ADIFOR 2.0, User's Guide (Revision D). 192, 1998.

P. A. Browne, C. J. Budd, C. Piccolo, and M. Cullen, Fast three dimensional radaptive mesh redistribution, Journal of Computational Physics, vol.275, pp.174-196, 2014.

J. Bruchon, H. Digonnet, and T. Coupez, Using a signed distance function for the simulation of metal forming process: formulation of the contact condition and mesh adaptation. From Lagrangian approach to an Eulerian approach, Int. J. Numer. Meth. Engng, vol.78, issue.8, pp.980-1008, 2009.

Y. Papegay, C. Faure, and . Odyssée, User's Guide version 1.7. RT-0224, INRIA, Faure, 1998.

W. Cao, W. Huang, and R. D. Russell, A Moving Mesh Method based on the Geometric Conservation Law, SIAM J. Sci. Comput, vol.47, pp.118-142, 2002.

C. Castro and E. Zuazua, Systematic Continuous Adjoint Approach to Viscous Aerodynamic Design on Unstructured Grids, AIAA Journal, vol.45, issue.9, pp.2125-2139, 2007.

P. Causin, J. Gerbeau, and F. Nobile, Added-mass effect in the design of partitioned algorithms for fluid-structure problems, Comput. Method Appl. Mech. Eng, pp.4506-4527, 2005.
URL : https://hal.archives-ouvertes.fr/inria-00071499

L. Chacón, G. L. Delzanno, and J. M. Finn, Robust, multidimensional meshmotion based on Monge-Kantorovich equidistribution, Journal of Computational Physics, vol.230, issue.1, pp.87-103, 2011.

P. Clément, Approximation by finite element functions using local regularization. Revue Française d'Automatique, Informatique et Recherche Opérationnelle, issue.2, pp.77-84, 1975.

G. Compère, J. Remacle, J. Jansson, and J. Hoffman, A mesh adaptation framework for dealing with large deforming meshes, Int. J. Numer. Meth. Engng, vol.82, pp.843-867, 2010.

G. Compère, E. Marchandise, and J. Remacle, Transient adaptivity applied to two-phase incompressible flows, Journal of Computational Physics, vol.227, issue.3, pp.1923-1942, 2008.

E. Constantinescu and A. Sandu, Multirate Timestepping Methods for Hyperbolic Conservation Law, Journal of Scientific Computing, vol.33, pp.239-278, 2007.

T. Coupez, G. Jannoun, N. Nassif, H. C. Nguyen, H. Digonnet et al., Positivity statements for a Mixed-Element-Volume scheme on fixed and moving grids, European Journal of Computational Mechanics, vol.241, issue.0, pp.767-798, 2006.

A. Boer, M. Van-der-schoot, H. A. Bijl-;-p, P. R. De-sampaio, K. Lyra et al., Mesh deformation based on radial basis function interpolation, Petrov-Galerkin solutions of the incompressible Navier-Stokes equations in primitive variables with adaptive remeshing, vol.85, pp.89-118, 1993.

C. Degand and C. Farhat, A three-dimensional torsional spring analogy method for unstructured dynamic meshes, Comput. & Struct, vol.80, issue.3-4, pp.305-316, 2002.

A. Denner, Experimental on Temporal Variable Step BDF2 Algorithms, 2014.

J. Donea, S. Giuliani, and J. P. Halleux, An arbitrary Lagrangian-Eulerian finite element method for transient dynamic fluid-structure interactions, Comput. Methods Appl. Mech. Engrg, vol.33, issue.1, pp.689-723, 1982.

A. S. Dvinsky, Adaptive Grid Generation from Harmonic Maps on Riemannian Manifolds, J. Comp. Phys, vol.95, pp.450-476, 1991.

;. A. Gauci, A. Loseille, E. Dervieux, F. Gauci, and . Alauzet, Towards goal-oriented mesh adaptation for fluid-structure interaction, Coupled Problems in Science and Engineering, 2015.

;. A. Gauci, E. Dervieux, F. Gauci, and . Alauzet, Vortical Flow Prediction of a Moving Aircraft Using Goal-Oriented Anisotropic Mesh Adaptation, 23 rd AIAA Computational Fluid Dynamics Conference, 2017.

S. Etienne, A. Garon, and D. Pelletier, Perspective on the Geometric Conservation Law and Finite Element Methods for ALE Simulations of Incompressible Flow, J. Comp. Phys, vol.228, issue.7, pp.2313-2333, 2009.

S. Etienne, A. Garon, D. Pelletier, and C. Cameron, Philiadium gregarium Versus Aurelia aurita: On Propulsion Propulsion of Jellyfish, 48th AIAA Aerospace Sciences Meeting, AIAA Paper, 1444.

C. Farhat, P. Geuzaine, and C. Grandmont, The Discrete Geometric Conservation Law and the Nonlinear Stability of ALE Schemes for the Solution of Flow Problems on Moving Grids, J. Comp. Phys, vol.174, issue.2, pp.669-694, 2001.

L. Fezoui and A. Dervieux, Finite-element non oscillatory schemes for compressible flows, Symposium on Computational Mathematics and Applications, vol.730, 1989.

K. Fidkowski-;-l.-formaggia and F. Nobile, Output-based space-time mesh optimization for unsteady flows using continuous-in-time adjoints, Computer Methods in Applied Mechanics and Engineering, vol.341, pp.4097-4116, 2004.

L. Formaggia, A. Quarteroni, and A. Veneziani, Cardiovascular Mathematics: Modeling and simulation of the circulatory system, vol.1, 2009.

L. J. Frazza-;-p, P. L. Frey, and . George, 3D anisotropic mesh adaptation for Reynolds Averaged Navier-Stokes simulations, p.2, 2008.

B. Froehle and P. Persson, High-order accurate fluid-structure simulation of a tuning fork, Computers & Fluids, vol.98, pp.230-238, 2014.

X. L. Dimet, ;. O. Talagrand, and F. X. Le-dimet, Variational algorithm for analysis and assimilation of meteorological observations : theoretical aspects, Tellus, vol.38, pp.97-110, 1986.

P. L. George, F. Hecht, and M. G. Vallet, Creation of internal points in Voronoi's type method. Control and adaptation, Adv. Eng. Software, vol.13, issue.5-6, pp.303-312, 1991.

J. F. Gerbeau, D. Lombardi, and E. Schenone, Reduced order model in cardiac electrophysiology with approximated Lax pairs, Advances in Computational Mathematics, pp.1-28, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01238830

M. B. Giles and N. A. Pierce, Improved lift and drag estimates using adjoint Euler equations, AIAA paper, pp.99-3293, 1999.

M. B. Giles and N. A. Pierce, An introduction to the adjoint approach to design, Flow, Turbulence and Combustion, vol.65, pp.393-415, 2000.

M. B. Giles and E. Suli, Adjoint methods for PDEs: a posteriori error analysis and postprocessing by duality, pp.145-236, 2002.

A. Guardone, D. Isola, and G. Quaranta, Arbitrary Lagrangian Eulerian formulation for two-dimensional flows using dynamic meshes with edge swapping, Journal of Computational Physics, vol.230, issue.20, pp.35-61, 1983.

L. Hascoet and V. , Tapenade 2.1 user's guide. RT-0300, INRIA, 2004.
URL : https://hal.archives-ouvertes.fr/inria-00069880

O. Hassan, K. A. Sørensen, K. Morgan, N. P. Weatherill, ;. Hay et al., A method for time accurate turbulent compressible fluid flow simulation with moving boundary components employing local remeshing, Int. J. Numer. Meth. Fluids, vol.53, issue.8, pp.204-217, 2007.

C. W. Hirt, A. A. Amsden, and J. L. Cook, An arbitrary Lagrangian-Eulerian computing method for all flow speeds, J. Comp. Phys, vol.14, issue.3, pp.227-253, 1974.

W. Huang, L. Kamenski, and X. Li, A new anisotropic mesh adaptation method based upon hierarchical a posteriori error estimates, J. Comp. Phys, vol.229, pp.2179-2198, 2010.

W. Huang and R. D. Russell, Adaptive moving mesh methods, vol.174, 2010.

T. J. Hughes, W. K. Liu, and T. K. Zimmermann, Lagrangian-Eulerian finite element formulation for incompressible viscous flows, Comput. Methods Appl. Mech. Engrg, vol.29, issue.3, pp.329-349, 1981.

E. Itam, Simulation numérique d'écoulements autour de corps non profilés par des modèles de turbulence hybridest un schéma multirate, 2017.

C. O.-marsden, J. Bailly, C. Berland, and . Bogey, High-order, low dispersive and low dissipative explicit schemes for multi-scale and boundary problems, J. Comp. Phys, vol.224, pp.637-662, 2007.

F. P. Thompson-;-n, J. F. Weatherill, B. K. Thompson, and . Soni, Handbook of grid generation, 1999.

M. Fagan, N. Tallent, M. Strout, P. Heimbach, C. Hill et al., Naumann. OpenAD/F : A Modular Open-Source Tool for Automatic Differentiation of Fortran Codes, ACM Transactions on Mathematical Software, vol.34, 2008.

A. Johnen, J. Remacle, and C. Geuzaine, Geometrical validity of curvilinear finite elements, J. Comp. Phys, vol.233, pp.359-372, 2013.

B. Koobus and C. Farhat, Second-order time-accurate and geometrically conservative implicit schemes for flow computations on unstructured dynamic meshes, Comput. Methods Appl. Mech. Engrg, vol.170, issue.1-2, pp.103-129, 1999.
URL : https://hal.archives-ouvertes.fr/hal-00379006

B. Koren, A robust upwind discretization method for advection, diffusion and source termes, Notes Numer. Fluid Mech, vol.45, pp.117-138, 1993.

M. Kucharik and M. Shashkov, Extension of Efficient, Swept-Integration-Based Conservative Method for Meshes with Changing Connectivity, Int. J. Numer. Meth. Fluids, vol.56, issue.8, pp.1359-1365, 2008.

B. Van-leer, Towards the ultimate conservative difference scheme I. The quest of monotonicity, Lecture notes in physics, vol.18, p.163, 1972.

M. Lesoinne and C. Farhat, Geometric Conservation Laws for Flow Problems with Moving Boundaries and Deformable Meshes, and their Impact on Aeroelastic Computations, Comput. Methods Appl. Mech. Engrg, vol.134, issue.1-2, p.170, 1971.

R. Löhner, Three-dimensional fluid-structure interaction using a finite element solver and adaptive remeshing, Computing Systems in Engineering, vol.1, issue.2-4, pp.257-272, 1990.

R. Löhner, J. D. Baum, ;. Löhner, and C. Yang, Improved ALE mesh velocities for moving bodies. Communications in numerical methods in engineering, Int. J. Numer. Meth. Fluids, vol.14, issue.12, pp.599-608, 1992.

R. Löhner, Applied CFD techniques. An introduction based on finite element methods, 2001.

A. Loseille, Adaptation de maillage anisotrope 3D multi-échelles et cibléeà une fonctionnelle pour la mécanique des fluides. Applicationà la prédiction haute-fidélité du bang sonique, 2008.

]. A. Loseille-2010a, F. Loseille, and . Alauzet, Optimal 3D highly anisotropic mesh adaptation applied to steady flows computation, J. Comp. Phys, 2010.

A. Loseille, A. Dervieux, and F. Alauzet, Fully anisotropic goal-oriented mesh adaptation for 3D steady Euler equations, Journal of Computational Physics, vol.229, pp.2866-2897, 2010.

A. Loseille, A. Dervieux, and F. Alauzet, Fully anisotropic goal-oriented mesh adaptation for 3D steady Euler equations, J. Comp. Phys, vol.229, pp.2866-2897, 2010.

A. Loseille and F. Alauzet, Loseille and F. Alauzet. Continuous mesh framework. Part II: validations and applications, SIAM J. Numer. Anal, vol.49, issue.1, pp.61-86, 2011.

A. Loseille and V. Menier, Serial and Parallel Mesh Modification Through a Unique Cavity-Based Primitive, Proceedings of the 22th International Meshing Roundtable, pp.541-558, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00935356

A. Loseille, F. Alauzet, and V. Menier, Unique cavity-based operator and hierarchical domain partitioning for fast parallel generation of anisotropic meshes, ComputerAided Design, vol.85, pp.53-67, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01426152

R. Loubère, P. Maire, M. Shashkov, J. Breil, and S. Galera, ReALE: a Reconnaction-Based Arbitrary-Lagrangian-Eulerian Method, J. Comp. Phys, vol.229, pp.4724-4761, 2010.

E. Luke, E. Collins, and E. Blades, A fast mesh deformation method using explicit interpolation, J. Comp. Phys, vol.231, pp.586-601, 2012.

M. Martinelli-;-l.-hascoët, V. Pascual, M. Martinelli, A. Dervieux, and A. Belme, AD-based perturbation methods for uncertainties and errors, Int. J. Engineering Systems Modelling and simulation, vol.2, pp.65-74, 2010.

D. L. Marcum, Handling unstructured meshes in multithreaded environments with the help of Hilbert renumbering and dynamic scheduling, Engineering with Computers, vol.17, issue.3, pp.211-233, 2001.

R. Martin and H. Guillard, A second order defect correction scheme for unsteady problems, Comput. & Fluids, vol.25, pp.9-27, 1996.
URL : https://hal.archives-ouvertes.fr/inria-00074228

D. J. Mavriplis, Adaptive Meshing Techniques for Viscous Flow Calculations on Mixed Element Unstructured Meshes, Int. J. Numer. Meth. Fluids, vol.34, issue.2, pp.93-111, 2000.

D. J. Mavriplis and Z. Yang, Construction of the Discrete Geometric Conservation Law for High-Order Time Accurate Simulations on Dynamic Meshes, J. Comp. Phys, vol.213, issue.2, pp.557-573, 2006.

V. Menier, Mesh Adaptation For the High Fidelity Prediction of Viscous Phenomena and Their Interactions. Application to Aeronautics, 2015.

K. Miller, R. N. Miller, and ;. Mohammadi, Optimal shape design, reverse mode of automatic differentiation and turbulence, I. SIAM Journal on Numerical Analysis, vol.18, issue.6, pp.1019-1032, 1981.

S. Murman, M. Aftosmis, and M. Berger, Simulation of 6-DOF Motion with Cartesian Method, 41th AIAA Aerospace Sciences Meeting and Exhibit, 1246.

F. , A. N. Barral, and G. Olivier, Time-accurate anisotropic mesh adaptation for three-dimensional time-dependent problems with body-fitted moving geometries, J. Comp. Phys, vol.331, pp.157-187, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01426156

L. , High Performance Parallel Computing of Flows in Complex Geometries, J. of Computational Science and Discovery, 2009.

A. B. Pierce-;-m, N. A. Giles, ;. Pierce, H. Nkonga, and . Guillard, Adjoint and defect error bounding and correction for functional estimates, Godunov Type Methods on Non-Structured Meshes for Three-Dimensional Moving Boundary Problems. RR-1883, INRIA, vol.200, pp.769-794, 1993.

B. Nkonga and H. Guillard, Godunov type method on non-structured meshes for three-dimensional moving boundary problems, Computer Methods in Applied Mechanics and Engineering, vol.113, issue.1-2, pp.183-204, 1994.
URL : https://hal.archives-ouvertes.fr/inria-00074789

B. Nkonga, On the Conservative and Accurate CFD Approximations for Moving Meshes and Moving Boundaries, Comput. Methods Appl. Mech. Engrg, vol.190, issue.13, pp.1801-1825, 2000.
URL : https://hal.archives-ouvertes.fr/hal-01313354

G. Olivier, Unsteady metric-based mesh adaptation applied to CFD moving domain simulations, 2011.

G. Olivier and F. Alauzet, A New Changing-Topology ALE Scheme for Moving Mesh Unsteady Simulations, 2011.

C. Pain, A. P. Humpleby, C. R. De-oliveira, and A. J. Goddard, Tetrahedral mesh optimisation and adaptivity for steady-state and transient finite element calculations, 44th AIAA Fluid Dynamics Conference, vol.190, pp.3771-3796, 2001.

M. Picasso-;-m.-picasso, V. Prachittham, and M. A. Gijs, An anisotropic error indicator based on Zienkiewicz-Zhu error estimator: Application to elliptic and parabolic problems, Int. J. Numer. Meth. Fluids, vol.24, issue.4, pp.1328-1355, 2003.

;. R. Becker, R. Rannacher, . D. Becker-;-r, J. T. Rausch, H. T. Batina et al., Spatial adaptation procedures on tetrahedral meshes for unsteady aerodynamic flow calculations, Acta Numerica, vol.19, pp.1243-1251, 1992.

J. Remacle, X. Li, M. S. Shephard, and J. E. Flaherty, Anisotropic adaptive simulation of transient flows using discontinuous Galerkin methods, Int. J. Numer. Meth. Engng, vol.62, pp.899-923, 2005.

P. Roe, Approximate Riemann solvers, parameter vectors, and difference schemes, J. Comp. Phys, vol.43, pp.357-372, 1981.

V. Rusanov, Calculation of Intersection of Non-Steady Shock Waves with Obstacles, J. Comp. Phys, pp.267-279, 1961.

S. , D. S. Piperno, ;. H. Sagan-;-p, and . Saksono, Dettmer and D. Peri?. An Adaptive Remeshing Strategy for Flows with Moving Boundaries and Fluid-Structure Interaction, Int. J. Numer. Meth. Engng, vol.27, issue.9, pp.1009-1050, 1994.

C. W. Shu and S. Osher, Efficient implementation of essentially non-oscillatory shock-capturing schemes, J. Comput. Phys, vol.77, pp.439-471, 1988.

W. Speares and M. Berzins, A 3D unstructured mesh adaptation algorithm for time-dependent shock-dominated problems, Int. J. Numer. Meth. Fluids, vol.25, pp.81-104, 1997.

R. J. Spiteri and S. J. Ruuth, A new class of optimal high-order strong-stabilitypreserving time discretization methods, SIAM J. Numer. Anal, vol.40, issue.2, pp.469-491, 2002.

B. Stoufflet, J. Periaux, L. Fezoui, and A. Dervieux, Numerical simulation of 3-D hypersonic Euler flows around space vehicles using adapted finite element, AIAA 25th Aerospace Sciences Meeting, 1987.

J. Thompson and Z. U. Warsi, Three-Dimensional Mesh Generation from Elliptic Systems, Proceedings of the AIAA CFD Conference, volume AIAA-83-1905, 1983.

X. Tong, D. Thompson, Q. Arnoldus, E. Collins, and E. Luke, Robust surface evolution and mesh deformation for three dimensional aircraft icing applications on a swept GLC-305 airfoil, 6th AIAA Atmospheric and Space Environments Conference, 2014.

D. A. Venditti and D. L. , Grid adaptation for functional outputs: application to two-dimensional inviscid flows, J. Comp. Phys, vol.176, issue.1, pp.40-69, 2002.

S. Walter, PyADOL-C : a python module to differentiate complex algorithms written in Python

A. Winslow, Equipotential Zoning of Two Dimensional Meshes, 1963.

M. Wintzer, M. Nemec, and M. J. Aftosmis, Adjoint-Based Adaptive Mesh Refinement for Sonic Boom Prediction, AIAA 26th Applied Aerodynamics Conference, 2008.

J. Wu, J. Z. Zhu, J. Szmelter, and O. C. Zienkiewicz, Error estimation and adaptivity in Navier-Stokes incompressible flows, Computational Mechanics, vol.6, pp.259-270, 1990.

Z. Yang and D. J. Mavriplis, Unstructured Dynamic Meshes with Higher-Order Time Integration Schemes for the Unsteady Navier-Stokes Equations, 41th AIAA Aerospace Sciences Meeting, AIAA Paper, 1222.

Z. Yang and D. J. Mavriplis, Higher-Order Time Integration Schemes for Aeroelastic Applications on Unstructured Meshes, AIAA Journal, vol.45, issue.1, pp.138-150, 2007.

O. C. Zienkiewicz and J. Z. Zhu, The superconvergent patch recovery and a posteriori error estimates. Part 1: The recovery technique, Int. J. Numer. Meth. Engng, vol.33, issue.7, pp.1331-1364, 1992.