R. J. Aaberg, R. Tunold, M. Mogensen, R. W. Berg, and R. Ødegaård, Morphological Changes at the Interface of the Nickel-Yttria Stabilized Zirconia Point Electrode, Journal of The Electrochemical Society, vol.145, issue.7, pp.2244-2252, 1998.

B. Abdallah, F. Willot, D. Jeulin, and J. Microscopy, , vol.263, pp.51-63, 2016.

H. Abe, K. Murata, T. Fukui, W. Moon, K. Kaneko et al., Microstructural control of Ni-YSZ cermet anode for planer thin-film solid oxide fuel cells, vol.496, pp.49-52, 2006.

P. Abrahamsen, A review of Gaussian random fields and correlation functions, 1997.

L. Adijanto, R. Küngas, F. Bidrawn, R. J. Gorte, and J. M. Vohs, Stability and performance of infiltrated La 0.8 Sr 0.2 Co x Fe 1? x O 3 electrodes with and without Sm 0

, Ce 0.8 O 1.9 interlayers, Journal of Power Sources, vol.196, issue.14, pp.5797-5802, 2011.

P. M. Alder, C. G. Jacquin, and J. A. Quiblier, Int. J. Multiphase Flow, vol.16, pp.691-712, 1990.

S. B. Adler, J. A. Lane, and B. C. Steele, Electrode Kinetics of Porous MixedConducting Oxygen Electrodes, J. Electrochem. Soc, vol.143, pp.3554-3564, 1996.

S. B. Adler, Chem. Rev, vol.104, p.4791, 2004.

R. J. Adler, The geometry of random fields, Classics in applied mathematics, 2010.

J. Aicart, J. Laurencin, M. Petitjean, and L. Dessemond, Experimental Validation of Two-Dimensional H2O and CO2 Co-Electrolysis Modeling, Fuel Cells, vol.14, issue.3, pp.430-447, 2014.

A. Ali, X. Wen, K. Nandakumar, J. Luo, and K. T. Chuang, J. Power Sources, vol.185, pp.961-966, 2008.

G. Anandakumar, N. Li, A. Verma, P. Singh, and J. Kim, J. Power Sources, pp.6659-6670, 2010.

M. D. Anderson, J. W. Stevenson, and S. P. Simner, J. Power Sources, vol.129, p.188, 2004.

M. Armstrong, A. Galli, H. Beucher, G. L. Loc'h, D. Renard et al., , 2011.

M. Avrami, Kinetics of Phase Change. I: General Theory, The Journal of Chem. Phys, vol.7, pp.1103-1112, 1939.

M. Avrami, Kinetics of Phase Change. II: Transformation-Time Relations for Random Distribution of Nuclei, The Journal of Chem. Phys, vol.8, pp.212-224, 1940.

M. Avrami, Kinetics of Phase Change. III: Granulation, Phase Change, and Microstructure, vol.9, pp.177-184, 1941.

S. Amitai, A. Bertei, and R. Blumenfeld, Theory-based design od sintered granular composite triples three-phase boundary in fuel cells, Physical review E, pp.52903-52904, 2017.

M. Baniassadi, H. Garmestani, D. S. Li, S. Ahzi, M. Khaleel et al., Acta Mater, vol.59, pp.30-43, 2011.

L. Bernadet, G. Gousseau, A. Chatroux, J. Laurencin, F. Mauvy et al., Int. J. of Hydrogen Energy, vol.40, pp.12918-12928, 2015.

S. K. Bathia and J. Catalysis, , vol.93, pp.192-196, 1985.

A. Bertei and C. Nicolella, Percolation theory in SOFC composite electrodes: effects of porosity and particle size distribution on effective properties, J. Power Sources, vol.196, pp.9429-9436, 2011.

A. Bertei, H. Choi, and J. G. Pharoah, C. Nicolella, Powder Tech, vol.231, pp.44-53, 2012.

A. Bertei, B. Nucci, and C. Nicolella, Chemical Engineering Science, vol.101, pp.175-190, 2013.

F. Bidrawn, R. Küngas, J. M. Vohs, and R. J. Gorte, J. Electrochem. Soc, vol.158, issue.5, pp.514-525, 2011.

L. Blum, U. Packbier, I. C. Vinke, and L. G. De-haart, Long-Term Testing of SOFC Stacks at Forschungszentrum Jülich, Fuel Cells, vol.13, issue.4, pp.646-653, 2013.

H. J. Bouwmeester, M. W. Otter, and B. A. Boukamp, J. Solid State Electrochem, vol.8, p.599, 2004.

B. P. Borglum and H. Ghezel-ayagh, Development of Solid Oxide Fuel Cells at Versa Power Systems and FuelCell Energy, ECS Transactions, vol.68, issue.1, pp.89-94, 2015.

N. P. Brandon, A. Blake, D. Corcoran, D. Cumming, A. Duckett et al., Development of metal supported solid oxide fuel cells for operation at 500-600 C, Journal of Electrochemical Energy Conversion and Storage, vol.1, issue.1, pp.61-65, 2004.

A. Brisse, J. Schefold, and M. Zahid, High temperature water electrolysis in solid oxide cells, International Journal of Hydrogen Energy, vol.33, issue.20, p.177, 2008.

Q. Cai, C. S. Adjiman, and N. Brandon, Electrochimica Acta, vol.56, pp.5804-5814, 2011.

?. Çelikbilek, D. Jauffrès, E. Siebert, L. Dessemond, M. Burriel et al., J.Power Sources, vol.333, p.72, 2016.

S. H. Chan, X. J. Chen, and K. A. Khor, Cathode micromodel of solid oxide fuel cell, J. Electrochem. Soc, vol.151, pp.164-172, 2004.

X. Chen, Y. Zhen, J. Li, and S. P. Jiang, Chromium deposition and poisoning in dry and humidified air at

, MnO 3+ ? cathodes of solid oxide fuel cells, International Journal of Hydrogen Energy, vol.35, issue.6, pp.2477-2485, 2010.

D. Chen, L. Lu, J. Li, Z. Yua, W. Kong et al., Percolation micro-model to predict the effective properties of the composite electrode with poly-dispersed particle sizes, J. Power Sources, vol.196, pp.3178-3185, 2011.

D. Chen, H. He, D. Zhang, H. Wang, and M. Ni, Energies, vol.6, pp.1632-1656, 2013.

H. Choi, D. Gawel, A. Berson, J. G. Pharoah, and K. Karan, ECS Trans, vol.35, issue.1, pp.997-1005, 2011.

M. Choi, B. Singh, E. D. Wachsman, and S. Song, J. Power Sources, vol.239, p.361, 2013.

S. J. Cooper, D. S. Eastwood, J. Gelb, G. Damblanc, D. J. Brett et al., J. Power Sources, vol.247, pp.1033-1039, 2014.

P. Costamagna, P. Costa, and V. Antonucci, Micro-modelling of solid oxide fuel cell electrodes, Electrochimica Acta, vol.43, pp.375-394, 1998.

J. S. Cronin, Y. C. Chen-wiegart, J. Wang, and S. A. Barnett, J. Power Sources, vol.233, pp.174-179, 2013.

G. Delette, J. Laurencin, F. Usseglio-viretta, J. Villanova, P. Bleuet et al., Inter. J. Hydrogen Energy, vol.38, pp.12379-12391, 2013.

J. Deseure, L. Dessemond, Y. Bultel, E. Siebert, and J. Euro, Ceram. Soc, vol.25, pp.26-73, 2005.

J. Deseure, Y. Bultel, L. Dessemond, and E. Siebert, Solid State Ionics, vol.176, p.235, 2005.

D. Ding, X. Li, S. Y. Lai, K. Gerdes, and M. Liu, Energy Environ. Sci, vol.7, pp.552-575, 2014.

P. Duhamel and M. Vetterli, Fast Fourier Transforms: A Tutorial Review and a State of the Art, Signal Processing, vol.19, pp.259-299, 1990.

V. Dusastre and J. A. Kilner, Optimisation of composite cathodes for intermediate temperature SOFC applications, Solid State Ionics, vol.126, pp.163-174, 1999.

E. Effori, H. Moussaoui, F. Monaco, J. Debayle, Y. Gavet et al.,

A. Faes, A. Hessler-wyser, D. Presvytes, and C. G. Vayenas, Nickel-zirconia anode degradation and triple phase boundary quantification from microstructural analysis, Fuel cells, vol.9, issue.6, pp.841-851, 2009.

C. Fu, K. Sun, N. Zhang, X. Chen, and D. Zhou, Electrochim. Acta, vol.52, p.4589, 2007.

G. Gaiselmann, M. Neumann, V. Schmidt, O. Pecho, T. Hocker et al., AIChE Journal, vol.60, issue.6, pp.1983-1999, 2014.

D. Gostovic, J. R. Smith, D. P. Kundinger, K. S. Jones, and E. D. Wachsmann, Electrochem. Solid State Letters, vol.10, issue.12, pp.214-217, 2007.

A. Enrico, W. Zhang, M. Lund-traulsen, E. M. Sala, P. Costamagna et al., Journal of the European Ceramic Society, vol.38, issue.7, pp.2677-2686, 2018.

N. Epstein, Chem. Eng. Sci, vol.44, issue.3, pp.77-779, 1989.

A. Galli, H. Beucher, G. L. Loc'h, and B. Doligez, Geostatistical simulations, Quantitative Geology and Geostatistics, vol.7, pp.217-233, 1994.
URL : https://hal.archives-ouvertes.fr/hal-00768562

Z. Gao, L. V. Mogni, E. C. Miller, J. G. Railsback, and S. A. Barnett, A perspective on low-temperature solid oxide fuel cells, Energy & Environmental Science, vol.9, issue.5, pp.1602-1644, 2016.

L. D. Gelb and K. E. Gubbins, Pore size distributions in porous glasses: a computer simulation study, Langmuir, vol.15, pp.305-308, 1999.

H. Ghezel-ayagh, Advances in SOFC Development at FuelCell Energy, Hydrogen Production by Electrolysis, 2013.

A. M. Gokhale, C. V. Iswaran, and R. T. Dehoff, Application of microstructure modelling to the kinetics of recrystallization, Metall. Trans. A, vol.11, pp.1377-1383, 1980.

A. M. Gokhale, A test for randomness of the spatial distribution of particles during phase transformation, Metall. Trans. A, vol.15, pp.243-245, 1984.

A. M. Gokhale, S. Zhang, and M. Liu, J. Power Sources, vol.194, pp.303-312, 2009.

J. Golbert, C. S. Adjiman, and N. Brandon, Ind. Eng. Chem. Res, vol.47, pp.7693-7699, 2008.

M. Gong, R. S. Gemmen, and X. Liu, J. Power Sources, vol.201, p.204, 2012.

C. Graves, S. D. Ebbesen, S. H. Jensen, S. B. Simonsen, and M. B. Mogensen, Nature Materials, vol.14, pp.239-244, 2015.

K. N. Grew, Y. S. Chu, J. Yi, A. A. Peracchio, J. R. Izzo et al., J. Electrochem. Soc, vol.157, issue.6, pp.783-792, 2010.

C. Haering, A. Roosen, and H. Schichl, Degradation of the electrical conductivity in stabilised zirconia system: Part I: yttria-stabilised zirconia, Solid State Ionics, vol.176, issue.3

A. Hagen, R. Barfod, P. V. Hendriksen, Y. Liu, and S. Ramousse, Degradation of anode supported SOFCs as a function of temperature and current load, Journal of The Electrochemical Society, vol.153, issue.6, pp.1165-1171, 2006.

J. Hanna, W. Y. Lee, Y. Shi, and A. F. Ghoniem, Fundamentals of electro-and thermochemistry in the anode of solid-oxide fuel cells with hydrocarbon and syngas fuels, Progress in Energy and Combustion Science, vol.40, pp.74-111, 2014.

S. Hashimoto, Y. Fukuda, M. Kuhn, K. Sato, K. Yashiro et al., Solid State Ionics, vol.186, p.37, 2011.

T. Hatae, K. Sato, T. Somekawa, Y. Matsuzaki, S. Amaha et al., Durability Assessment of SOFC Stacks with Several Types of Structures for Thermal Cycles during Their Lifetimes on Residential Use, ECS Transactions, vol.68, issue.1, pp.2209-2216, 2015.

A. Hauch, S. H. Jensen, S. Ramousse, and M. Mogensen, Performance and durability of solid oxide electrolysis cells, Journal of The Electrochemical Society, vol.153, issue.9, pp.1741-1747, 2006.

A. Hauch, S. D. Ebbesen, S. H. Jensen, and M. Mogensen, Solid oxide electrolysis cells: microstructure and degradation of the Ni/yttria-stabilized zirconia electrode, Journal of The Electrochemical Society, vol.155, issue.11, pp.1184-1193, 2008.

K. Hilpert, D. Das, M. Miller, D. H. Peck, and R. Weiss, Chromium vapor species over solid oxide fuel cell interconnect materials and their potential for degradation processes, Journal of The Electrochemical Society, vol.143, issue.11, pp.3642-3647, 1996.

R. Hino, K. Haga, H. Aita, and K. Sekita, 38. R&D on hydrogen production by hightemperature electrolysis of steam, Nuclear Engineering and Design, vol.233, issue.1, pp.363-375, 2004.

L. Holzer, B. Münch, B. Iwanschitz, M. Cantoni, and T. Graule, J. Power Sources, vol.196, pp.7076-7089, 2011.

L. Holzer, D. Wiedenmann, B. Münch, L. Keller, M. Prestat et al., J. Mater. Sci, vol.48, pp.2934-2952, 2013.

W. M. Harris and W. K. Chiu, Journal of Power Sources, vol.282, pp.552-561, 2015.

W. M. Harris and W. K. Chiu, Journal of Power Sources, vol.282, pp.622-629, 2015.

P. Hjalmarsson, X. Sun, Y. Liu, M. C. Chen-;-y, J. R. Hsiao et al., Solid State Ionics, vol.262, p.33, 1997.

M. Hubert, J. Laurencin, P. Cloetens, J. C. Silva, F. Lefebvre-joud et al., Solid State Ionics, vol.294, pp.90-107, 2016.

M. Hubert, Durability of Solid Oxide Cells: an experimental and modelling investigation based on synchrotron X-ray nano-tomography characterization, 2017.
URL : https://hal.archives-ouvertes.fr/tel-01689775

M. Hubert, A. Pacureanu, C. Guilloud, Y. Yang, J. C. Silva et al., Applied Physics Letters, 2017.

M. Hubert, J. Laurencin, P. Cloetes, B. Morel, D. Montinaro et al., J. Power Sources, vol.397, p.240, 2018.

M. Hubert, A. Pacureanu, C. Guilloud, Y. Yang, J. C. Da-silva et al., Efficient correction of wavefront inhomogeneities in X-ray holographic nanotomography by random sample displacement, Applied Physic Letters, vol.112, pp.203704-203705, 2018.

H. J. Hwang, J. Moon, S. Lee, and E. A. Lee, J. Power Sources, vol.145, pp.261-268, 2005.

T. S. John, D. Irvine, M. C. Neagu, C. Verbraeken, C. Chatzichristodoulou et al., Nature Energy, vol.1, pp.1-13, 2016.

V. J. Janardhanan, V. Heuveline, and O. Deutschmann, Three-phase boundary length in solid-oxide fuel cells: a mathematical model, J. Power Sources, vol.178, pp.368-372, 2008.

Z. Jiao, N. Shikazono, and N. Kasagi, Quantitative Characterization of SOFC Nickel-YSZ Anode Microstructure Degradation Based on Focused-Ion-Beam 3D-Reconstruction Technique, J. Electrochem. Soc, vol.159, issue.3, pp.285-291, 2012.

S. P. Jiang, J. G. Love, J. P. Zhang, M. Hoang, Y. Ramprakash et al., The electrochemical performance of LSM/zirconia-yttria interface as a function of a-site non-stoichiometry and cathodic current treatment, Solid State Ionics, vol.121, issue.1, pp.1-10, 1999.

S. P. Jiang, Sintering behavior of Ni/Y2O3-ZrO2cermet electrodes of solid oxide fuel cells, Journal of Materials Science, vol.38, issue.18, pp.3775-3782, 2003.

S. P. Jiang and X. Chen, Chromium deposition and poisoning of cathodes of solid oxide fuel cells-a review, International Journal of Hydrogen Energy, vol.39, issue.1, pp.505-531, 2014.

S. J. Jones and H. K. Bhadeshia, Kinetics of the simultaneous decomposition of austenite into several transformation products, Acta Mater, vol.45, pp.2911-2920, 1997.

J. Joos, M. Ender, T. Carraro, A. Weber, and E. Ivers-tiffée, Representative volume element size for accurate solid oxide fuel cell cathode reconstructions from focused ion beam tomography data, Electrochimica Acta, vol.82, pp.268-276, 2012.

A. Kirubakaran, S. Jain, and R. K. Nema, A review on fuel cell technologies and power electronic interface, Renewable and Sustainable Energy Reviews, vol.13, issue.9, pp.2430-2440, 2009.

Y. T. Kim, Z. Jiao, and N. Shikazono, Evaluation of La0.6Sr0.4Co0.2Fe0.8O3-Gd0.1Ce0.9O1.95 composite cathode with three dimensional microstructure reconstruction, J. Power Sources, vol.342, pp.787-795, 2017.

Y. T. Kim and N. Shikazono, Investigation of La0.6Sr0.4CoO3-?-Gd0.1Ce0.9O1.95 composite cathode with different volume ratios by three dimensional reconstruction, Solid State Ionics, vol.309, pp.77-85, 2017.

H. Kishimoto, K. Yashiro, T. Shimonosono, M. E. Brito, K. Yamaji et al., In situ analysis on the electrical conductivity degradation of NiO doped yttria stabilized zirconia electrolyte by micro-Raman spectroscopy, lectrochimica Acta, vol.82, pp.263-267, 2012.

B. Kenney, M. Valdmanis, C. Baker, J. G. Pharoah, and K. Karan, J. Power Sources, vol.189, pp.1051-1059, 2009.

J. Kong, K. Sun, D. Zhou, N. Zhang, J. Mu et al., J. Power Sources, vol.166, pp.337-342, 2007.

E. Konysheva, H. Penkalla, E. Wessel, J. Mertens, U. Seeling et al., Chromium poisoning of perovskite cathodes by the ODS alloy Cr5Fe1Y2O3 and the high chromium ferritic steel Crofer22APU, Journal of The Electrochemical Society, vol.153, issue.4, pp.765-773, 2006.

M. A. Laguna-bercero, Recent advances in high temperature electrolysis using solid oxide fuel cells: A review, Journal of Power Sources, vol.203, pp.136-137, 2000.

A. Lang and J. Potthoff, Monte Carlo Methods Appl, vol.17, pp.195-214, 2011.

C. , Geostatistical Simulation, Model and Algorithms, 2002.

A. Lanzini, P. Leone, and P. Asinari, J. Power Sources, vol.194, pp.408-422, 2009.

J. Laurencin, F. Lefebvre-joud, and G. Delette, Impact of cell design and operating conditions on the performances of SOFC fuelled with methane, Journal of Power Sources, vol.177, issue.2, pp.355-368, 2008.

J. Laurencin, R. Quey, G. Delette, H. Suhonen, P. Cloetens et al., J. Power Sources, vol.198, pp.182-189, 2012.

J. Laurencin, M. Hubert, K. Couturier, T. L. Bihan, P. Cloetens et al., Electrochimica Acta, vol.174, pp.1299-1316, 2015.

J. Laurencin, M. Hubert, D. Sanchez, S. Pylypko, M. Morales et al., Int. J. of Hydrogen Energy, vol.38, pp.6917-6929, 2013.

]. E. -grindler2013b, J. Lay-grindler, J. Laurencin, I. Villanova, F. Kieffer et al., Degradation study by 3D reconstruction of a nickel-yttria stabilized zirconia cathode after high temperature steam electrolysis operation, Journal of Power Sources, vol.57, issue.1, pp.927-936, 2013.

Y. Leng, S. H. Chan, and Q. Liu, Int. J. Hydrogen Energy, vol.33, p.3808, 2008.

Z. R. Liang, C. P. Fernandes, F. Magnani, and P. C. Philippi, J. Petrol. Sci. Eng, vol.21, pp.273-283, 1998.

]. S. [linderoth2001, N. Linderoth, K. V. Bonanos, J. B. Jensen, and . Bilde-sørensen, Effect of NiOto-Ni Transformation on Conductivity and Structure of Yttria-Stabilized ZrO2, Journal of the American Ceramic Society, vol.84, issue.11, pp.2652-2656, 2001.

X. Liu, C. Martin, G. Delette, J. Laurencin, D. Bouvard et al., J. Power Sources, vol.196, pp.2046-2054, 2011.

Y. L. Liu, K. Thydén, M. Chen, and A. Hagen, Microstructure degradation of LSMYSZ cathode in SOFCs operated at various conditions, Solid State Ionics, vol.206, pp.97-103, 2012.

Y. Leng, S. Chan, and Q. Liu, Development of LSCF-GDC composite cathodes for low-temperature solid oxide fuel cells with thin film GDC electrolyte, Int. J. Hydrogen Energy, vol.33, pp.3808-3818, 2008.

A. Mai, V. Haanappel, F. Tietz, and D. Stöver, Ferrite-based perovskites as cathode materials for anode-supported solid oxide fuel cells: Part II. Influence of the CGO interlayer, Solid State Ionics, vol.177, issue.19, pp.2103-2107, 2006.

D. Marinha, L. Dessemond, J. S. Cronin, J. R. Wilson, and E. Djurado, Chem. Mater, vol.23, issue.24, pp.5340-5348, 2011.

T. Matsui, R. Kishida, H. Muroyama, and K. Eguchi, Comparative Study on Performance Stability of Ni-Oxide Cermet Anodes under Humidified Atmospheres in Solid Oxide Fuel Cells, Journal of The Electrochemical Society, vol.159, issue.8, pp.456-460, 2012.

Y. Matsuzaki and I. Yasuda, Dependence of SOFC cathode degradation by chromium-containing alloy on compositions of electrodes and electrolytes, Journal of The Electrochemical Society, vol.148, issue.2, pp.126-131, 2001.

S. Mekhilef, R. Saidur, and A. Safari, Comparative study of different fuel cell technologies, Renewable and Sustainable Energy Reviews, vol.16, issue.1, pp.981-989, 2012.

N. H. Menzler, F. Tietz, S. Uhlenbruck, H. P. Buchkremer, and D. Stöver, J. Mater. Sci, vol.45, pp.3109-3135, 2010.

C. Metcalfe, O. Kesler, T. Rivard, F. Gitzhofer, and N. Abatzoglou, J. Electrochem. Soc, vol.157, issue.9, pp.1326-1335, 2010.

N. Q. Minh, Ceramic fuel cells, Journal of the American Ceramic Society, vol.76, issue.3, pp.563-588, 1993.

P. Moçoteguy and A. Brisse, A review and comprehensive analysis of degradation mechanisms of solid oxide electrolysis cells, Inter. J. Hydrogen Energy, vol.38, pp.15887-15902, 2013.

F. Monaco, V. Tezyk, E. Siebert, S. Pylypko, B. Morel et al., Experimental validation of a La0.6Sr0.4Co0.2Fe0.8O3-? electrode model operated in electrolysis mode: Understanding the reaction pathway under anodic polarization, Solid State Ionics, vol.319, pp.234-246, 2018.

B. Morel, J. Laurencin, Y. Bultel, and F. Lefebvre-joud, Anode-supported sofc model centered on the direct internal reforming, Journal of The Electrochemical Society, vol.152, issue.7, pp.1382-1389, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00386435

J. E. Mortensen, M. Søgaard, and T. Jacobsen, J. Electrochem. Soc, p.161, 2014.

H. Moussaoui, J. Debayle, Y. Gavet, and J. Laurencin, Proc. SPIE -Int, vol.10338, 2017.

H. Moussaoui, J. Laurencin, Y. Gavet, G. Delette, M. Hubert et al., Stochastic Geometrical Modeling of Solid Oxide Cells Electrodes Validated on 3D Reconstructions, Computational Materials Science, vol.143, pp.262-276, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01655845

H. Moussaoui, R. K. Sharma, J. Debayle, Y. Gavet, G. Delette et al., Journal of Power Sources, vol.412, pp.736-748, 2019.

P. E. Murray, M. J. Server, and S. A. Barnett, Solid State Ionics, vol.148, p.27, 2002.

M. Naebe and K. Shirvanimoghaddam, Applied Materials Today, vol.5, pp.223-245, 2016.

G. J. Nelson, K. N. Grew, J. R. Izzo, J. J. Lombardo, W. M. Harris et al., threedimensional microstructural changes in the Ni-YSZ solid oxide fuel cell anode during operation, vol.60, pp.3491-3500, 2012.

M. Neumann, J. Stan?k, O. M. Pecho, L. Holzer, V. Bene? et al., Comput. Mater. Sci, vol.118, pp.353-364, 2016.

M. Ni, M. K. Leung, and D. Y. Leung, Technological development of hydrogen production by solid oxide electrolyzer cell (SOEC), International Journal of Hydrogen energy, vol.33, issue.9, pp.2337-2354, 2008.

L. Nie, Q. Sun, Z. Liu, and M. Liu, Inter. J. Hydrogen Energy, vol.40, pp.16503-16508, 2015.

J. Nielsen, T. Jacobsen, and M. Wandel, Electrochimica Acta, vol.56, pp.2792-2800, 2011.

]. J. 'brien2008, M. G. O'brien, C. M. Mckellar, J. S. Stoots, G. L. Herring et al., Parametric study of large-scale production of syngas via high-temperature co-electrolysis, International Journal of Hydrogen Energy, vol.34, issue.9, pp.17-28, 2003.

M. Ostergard, C. Clausen, C. Bagger, and M. Mogensen, Manganite-zirconia composite cathodes for SOFC: influence of structure and composition, Electrochimica Acta, vol.40, issue.12, pp.1971-1981, 1995.

H. Orui, K. Nozawa, K. Watanabe, S. Sugita, R. Chiba et al., Development of practical size anode-supported solid oxide fuel cells with multilayer anode structures, Journal of The Electrochemical Society, vol.155, issue.11, pp.1110-1116, 2008.

M. H. Pihlatie, A. Kaiser, M. Mogensen, and M. Chen, Electrical conductivity of Ni-YSZ composites: Degradation due to Ni particle growth, Solid State Ionics, vol.189, issue.1, pp.82-90, 2011.

B. S. Prakash, S. S. Kumar, and S. T. Aruna, Renew. Sustain. Ener. Rev, vol.36, pp.149-179, 2014.

F. Qiang, K. Sun, N. Zhang, X. Zhu, D. Le et al., J. Power Sources, vol.168, p.338, 2007.

K. Rhazaoui, Q. Cai, P. Shearing, C. S. Adjiman, and N. P. Brandon, ECS Transactions, vol.35, issue.1, pp.1097-1105, 2011.

J. Rutman and I. Riess, Solid State Ionics, vol.179, p.913, 2008.

J. Sanyal, G. M. Goldin, H. Zhu, and R. J. Kee, J. Power Sources, pp.6671-6679, 2010.

J. Schefold and A. Brisse, Steam electrolysis in reversibly operated SOFC: Longterm cell testing beyond 1000 h, ECS Transactions, vol.53, issue.9, pp.53-61, 2013.

L. C. Schneider, C. L. Martin, Y. Bultel, L. Dessemond, and D. Bouvard, Electrochimica Acta, vol.52, pp.3190-3198, 2007.

J. A. Schuler, Z. Wuillemin, A. Hessler-wyser, C. Comminges, N. Steiner et al., Co, Fe) O 3 cathodes after 10,000 h SOFC stack testing, Cr-poisoning in, vol.211, pp.177-183, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01272942

J. Serra, Image analysis and mathematical morphology, Theoretical advances, 1988.

R. K. Sharma, M. Burriel, L. Dessemond, V. Martin, J. Bassat et al., J. Power Sources, pp.17-28, 2016.

J. Serra, Image analysis and mathematical morphology, Theoretical advances, 1988.

P. R. Shearing, R. S. Bradley, J. Gelb, F. Tariq, P. J. Withers et al., Solid State Ionics, vol.216, pp.69-72, 2012.

T. Shimonosono, H. Kishimoto, M. E. Brito, K. Yamaji, T. Horita et al., Phase transformation related electrical conductivity degradation of NiO doped YSZ, Solid State Ionics, vol.225, pp.69-72, 2012.

S. C. Singhal and K. Kendall, High Temperature Solide Oxide Fuel cells, Fundamental, Design and Applications, 2003.

S. P. Simner, M. D. Anderson, G. Xia, Z. Yang, L. R. Pederson et al., Degradation Mechanisms of La-Sr-Co-Fe-O3 SOFC Cathodes, Electrochemical and Solid-State Letters, vol.152, issue.4, pp.478-481, 2005.

D. Simwonis, F. Tietz, and D. Stöver, Nickel coarsening in annealed Ni/8YSZ anode substrates for solid oxide fuel cells, Solid State Ionics, vol.132, issue.3, pp.241-251, 2000.

T. L. Skafte, J. Hjelm, P. Blennow, and C. R. Graves, Proc. 12th European SOFC & SOE Forum, 2016.

J. R. Smith, A. Chen, D. Gostovic, D. Hickey, D. Kundinger et al., Solid State Ionics, vol.180, pp.90-98, 2009.

O. Stenzel, O. Pecho, L. Holzer, M. Neumann, and V. Schmidt, AIChE Journal, vol.62, issue.5, pp.1834-1843, 2016.

O. Stenzel, O. Pecho, L. Holzer, M. Neumann, and V. Schmidt, Big data for microstructure-property relationships: a case study of predicting effective conductivities, AIChE Journal, vol.63, pp.4224-4232, 2017.

S. Sunde, Monte Carlo simulations of polarization resistance of composite electrodes for solid oxide fuel cells, J. Electrochem. Soc, vol.143, pp.1930-1939, 1996.

S. Sunde, Simulations of composite electrodes in fuel cells, Journal of Electroceramics, vol.5, pp.153-182, 2000.

Y. Suzue, N. Shikazono, and N. Kasagi, J. Power Sources, vol.184, pp.52-59, 2008.

T. Suzuki, Z. Hasan, Y. Funahashi, T. Yamaguchi, Y. Fujishiro et al.,

. Awano, Impact of Anode Microstructure on Solid Oxide Fuel Cells, Science, vol.325, pp.852-855, 2009.

A. M. Svensson, S. Sunde, and K. Ni?ancia?lu, J. Electrochem. Soc, vol.145, p.116, 1390.

P. Tanasini, M. Cannarozzo, P. Costamagna, A. Faes, J. Van-herle et al., Experimental and theoretical investigation of degradation mechanisms by particle coarsening in SOFC electrodes, Fuel Cells, vol.9, issue.5, pp.740-752, 2009.

F. Tietz, H. Buchkremer, and D. Stöver, Components manufacturing for solid xide fuel cells, Solid State Ionics, vol.152, pp.373-381, 2002.

F. Tietz, V. A. Haanappel, A. Mai, J. Mertens, and D. Stöver, Performance of LSCF cathodes in cell tests, Journal of Power Sources, vol.156, issue.1, pp.20-22, 2006.

H. Tu and U. Stimming, Advances, aging mechanisms and lifetime in solid-oxide fuel cells, Journal of Power Sources, vol.127, issue.1, pp.284-293, 2004.

M. C. Tucker, H. Kurokawa, C. P. Jacobson, L. C. De-jonghe, and S. J. Visco, A fundamental study of chromium deposition on solid oxide fuel cell cathode materials, Journal of Power Sources, vol.160, issue.1, pp.130-138, 2006.

J. Villanova, J. Laurencin, P. Cloetens, P. Bleuet, G. Delette et al., J. Power Sources, vol.243, pp.841-849, 2013.

S. Uhlenbruck, T. Moskalewicz, N. Jordan, H. Penkalla, H. P. Buchkremer et al., Element interdiffusion at electrolyte-cathode interfaces in ceramic high temperature fuel cells, -Viretta2015] F. Usseglio-Viretta, vol.180, pp.394-403, 2009.

P. Vernoux, M. Guillodo, J. Fouletier, and A. Hammou, Alternative anode material for gradual methane reforming in solid oxide fuel cells, Solid State Ionics, vol.135, issue.1, pp.425-431, 2000.

A. V. Virkar, J. Chen, C. W. Tanner, and J. Kim, Solid State Ionics, vol.131, pp.189-198, 2000.

N. Vivet, S. Chupin, E. Estrade, T. Piquero, P. L. Pommier et al., J. Power Sources, vol.196, pp.7541-7549, 2011.

N. Vivet, S. Chupin, E. Estrade, A. Richard, S. Bonnamy et al., J. Power Sources, vol.196, pp.9989-9997, 2011.

A. V. Virkar, J. Chen, C. W. Tanner, and J. Kim, the role of electrode microstructure on activation and concentration polarizations in solid oxide fuel cells, Solid State Ionics, vol.131, pp.189-98, 2000.

B. Wei, K. Chen, C. C. Wang, Z. Lü, and S. P. Jiang, Cr deposition on porous La 0

, 2 Fe 0.8 O 3? ? electrodes of solid oxide cells under open circuit condition, Solid State Ionics, vol.281, pp.29-37, 2015.

R. J. Wilson and D. J. Nott, Image Anal. Stereol, vol.20, pp.71-78, 2001.

J. R. Wislon, W. Kobsiriphat, R. Mendoza, H. Y. Chen, J. M. Hiller et al., Nat. Mater, vol.5, pp.541-544, 2006.

J. R. Wilson, J. S. Cronin, A. T. Duong, S. Rukes, H. Chen et al., J. Power Sources, vol.195, pp.1829-1840, 2010.

W. G. Wang and M. Mogensen, Solid State Ionics, vol.176, p.457, 2005.

J. R. Wilson, J. S. Cronin, and S. A. Barnett, Scripta Materialia, vol.65, pp.67-72, 2011.

O. Yamamoto, Solid oxide fuel cells: fundamental aspects and prospects, Electrochimica Acta, vol.45, issue.15, pp.2423-2435, 2000.

Z. Yan, S. Hara, Y. Kim, and N. Shikazono, Int. J. Hydrogen Energy, vol.42, p.30166, 2017.

K. Yashiro, I. Nakano, M. Kuhn, S. Hashimoto, K. Sato et al., ECS Trans, p.1899, 2011.

H. Yokokawa, N. Sakai, T. Kawada, and M. Dokiya, Solid State Ionics, vol.52, p.43, 1992.

H. Yokokawa, H. Tu, B. Iwanschitz, A. Mai, ;. Yurkiv et al., J. Electrochem. Soc, vol.182, p.480, 2008.

S. Zhang, Quantitative characterization and modelling of the microstructure of solid oxide fuel cell composite electrodes, Ph.D. dissertation, School of Materials Science and Engineering, 2010.

S. Zhang and A. M. Gokhale, Computer simulations of topological connectivity of the triple phase boundaries in solid oxide fuel cell composite cathodes, J. Power Sources, pp.172-179, 2012.

Y. Zhang, Y. Wang, Y. Wang, F. Chen, and C. Xia, J. Power Sources, vol.196, pp.1983-1991, 2011.

K. Zheng and M. Ni, Sci. Bull, vol.61, issue.1, pp.78-85, 2016.

W. Z. Zhu and S. C. Deevi, A review on the status of anode materials for solid oxide fuel cells, Materials Science and Engineering A, vol.362, issue.1, pp.228-239, 2003.