E. H. Schindel-bidinelli and H. Jossi, Pratique du collage industriel. Tec & DocLavoisier, 1992.

P. Cognard, . Collage, and . Matériaux, Mécanismes. Classification des colles », Tech. Ing. Entrep. Ind, vol.4, pp.7615-7616, 2002.

E. D. Ceretti and B. Monasse, Assemblage des matériaux par collage, vol.3758, 2008.

C. Gauthier, Analyse acoustique et physico-chimique du couplage de solides élastiques: étude de l'adhésion dans les collages structuraux, 2016.

E. Siryabe, « Evaluation non destructive par ultrasons de l'adhésion aux interfaces de joints collés, 2016.

N. and A. Ismaili, « Nouvelle méthode numérique de résolution d'un problème inverse: application à l'estimation des paramètres caractéristiques d'un adhésif dans une structure tri-couche, 2009.

E. B. Ndiaye, Contrôle santé de structures sandwichs composites, caractérisation et évaluation non destructives de l'adhésion et du vieillissement -Simulations par éléments finis et expérimentation par mesure d'impédance et par ultrasons multiéléments, 2014.

C. H. Yew and X. W. Weng, Using ultrasonic SH waves to estimate the quality of adhesive bonds in plate structures, J. Acoust. Soc. Am, vol.77, issue.5, pp.1813-1823, 1985.

M. V. Predoi, M. Ech-cherif-el-kettani, D. Leduc, P. Pareige, and K. Coné, Use of shear horizontal waves to distinguish adhesive thickness variation from reduction in bonding strength, J. Acoust. Soc. Am, vol.138, issue.2, pp.1206-1213, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01938754

B. and L. Crom, Evaluation ultrasonore des réparations de structures métalliques par collage de patchs composites, 2010.

T. A. Barnes and I. R. Pashby, Joining techniques for aluminium spaceframes used in automobiles: Part II-adhesive bonding and mechanical fasteners, J. Mater. Process. Technol, vol.99, pp.72-79, 2000.

G. W. Critchlow and D. M. Brewis, « Review of surface pretreatments for aluminium alloys, Int. J. Adhes. Adhes, vol.16, issue.4, pp.255-275, 1996.

J. J. Bikerman, The Science of Adhesive Joints, 2013.

C. C. Guyott, P. Cawley, and R. D. Adams, « The non-destructive testing of adhesively bonded structure: a review, J. Adhes, vol.20, issue.2, pp.129-159, 1986.

T. Kundu, A. Maji, T. Ghosh, and K. Maslov, « Detection of kissing bonds by Lamb waves, Ultrasonics, vol.35, issue.8, pp.573-580, 1998.

D. Jiao and J. L. Rose, « An ultrasonic interface layer model for bond evaluation, J. Adhes. Sci. Technol, vol.5, issue.8, pp.631-646, 1991.

C. J. Brotherhood, B. W. Drinkwater, and F. J. Guild, « The effect of compressive loading on the ultrasonic detectability of kissing bonds in adhesive joints, J. Nondestruct. Eval, vol.21, issue.3, pp.95-104, 2002.

A. I. Lavrentyev and S. I. Rokhlin, « Ultrasonic spectroscopy of imperfect contact interfaces between a layer and two solids, J. Acoust. Soc. Am, vol.103, issue.2, pp.657-664, 1998.

R. L. Vijaya-kumar, M. R. Bhat, and C. R. Murthy, Evaluation of kissing bond in composite adhesive lap joints using digital image correlation: Preliminary studies, vol.42, pp.60-68, 2013.

R. D. Adams, R. D. Adams, J. Comyn, W. C. Wake, and W. C. Wake, Structural adhesive joints in engineering, 1997.

P. B. Nagy, Ultrasonic detection of kissing bonds at adhesive interfaces, J. Adhes. Sci. Technol, vol.5, issue.8, pp.619-630, 1991.

C. Meola, G. M. Carlomagno, A. Squillace, and A. Vitiello, « Non-destructive evaluation of aerospace materials with lock-in thermography, Eng. Fail. Anal, vol.13, issue.3, pp.380-388, 2006.

P. N. Marty, N. Desai, and J. Andersson, « NDT of kissing bond in aeronautical structures, 16th World Conference on NDT, 2004.

M. F. Najib and A. S. Nobari, « Kissing bond detection in structural adhesive joints using nonlinear dynamic characteristics », Int. J. Adhes. Adhes, vol.63, pp.46-56

R. Usamentiaga, P. Venegas, J. Guerediaga, L. Vega, and I. López, « Non-destructive inspection of drilled holes in reinforced honeycomb sandwich panels using active thermography, Infrared Phys. Technol, vol.55, issue.6, pp.491-498, 2012.

E. Östman and S. Persson, « Application of X-ray Tomography in non-destructive testing of fibre reinforced plastics, Mater. Des, vol.9, issue.3, pp.142-147, 1988.

D. J. Bull, L. Helfen, I. Sinclair, S. M. Spearing, and T. Baumbach, « A comparison of multi-scale 3D X-ray tomographic inspection techniques for assessing carbon fibre composite impact damage, Compos. Sci. Technol, vol.75, pp.55-61, 2013.

I. Amenabar, A. Mendikute, A. López-arraiza, M. Lizaranzu, and J. Aurrekoetxea, « Comparison and analysis of non-destructive testing techniques suitable for delamination inspection in wind turbine blades, Compos. Part B Eng, vol.42, issue.5, pp.1298-1305, 2011.

P. Liu, R. M. Groves, and R. Benedictus, « 3D monitoring of delamination growth in a wind turbine blade composite using optical coherence tomography, Ndt E Int, vol.64, pp.52-58, 2014.

S. Fidan, T. S?nmazçelik, and E. Avcu, « Internal damage investigation of the impacted glass/glass+ aramid fiber reinforced composites by micro-computerized tomography, NDT E Int, vol.51, pp.1-7, 2012.

H. A. Jama, E. M. Hussein, and P. Lee-sullivan, « Detection of debonding in compositealuminum joints using gamma-ray Compton scattering, NDT E Int, vol.31, issue.2, pp.99-103, 1998.

S. M. Shepard, « Introduction to active thermography for non-destructive evaluation, Anti-Corros. Methods Mater, vol.44, issue.4, pp.236-239, 1997.

J. Tashan and R. Al-mahaidi, « Investigation of the parameters that influence the accuracy of bond defect detection in CFRP bonded specimens using IR thermography, Compos. Struct, vol.94, issue.2, pp.519-531, 2012.

M. Omar, M. Hassan, K. Donohue, K. Saito, and R. Alloo, Infrared thermography for inspecting the adhesion integrity of plastic welded joints, NDT E Int, vol.39, issue.1, pp.1-7, 2006.

H. Berglind and A. Dillenz, « Detecting glue deficiency in laminated wood-a thermography method comparison, NDT E Int, vol.36, issue.6, pp.395-399, 2003.

M. Genest, M. Martinez, N. Mrad, G. Renaud, and A. Fahr, « Pulsed thermography for non-destructive evaluation and damage growth monitoring of bonded repairs, Compos. Struct, vol.88, issue.1, pp.112-120, 2009.

S. Johnson, Thermoelastic stress analysis for detecting and characterizing static damage initiation in composite lap shear joints, Compos. Part B Eng, vol.56, pp.740-748, 2014.

D. Mercier, J. Lesage, X. Decoopman, and D. Chicot, « Eddy currents and hardness testing for evaluation of steel decarburizing, NDT E Int, vol.39, issue.8, pp.652-660, 2006.

B. Helifa, « Contribution à la Simulation du CND par Courants de Foucault en vue de la Caractérisation des Fissures Débouchantes, 2012.

M. J. Santos, J. Perdigao, and P. Faia, Ultrasonic guided waves scattering effects from defects in adhesively bonded lap joints using pitch and catch and pulse-echo techniques, J. Adhes, vol.84, issue.5, pp.421-438, 2008.

C. J. Brotherhood, B. W. Drinkwater, and S. Dixon, The detectability of kissing bonds in adhesive joints using ultrasonic techniques, vol.41, pp.521-529, 2003.

S. De-barros, A. L. Gama, M. Rousseau, and B. Collet, « Characterization of bonded plates with Lamb and SH waves using a quasi-static approximation, Lat. Am. J. Solids Struct, vol.1, issue.4, pp.379-399, 2004.

Z. Fan, M. Castaings, M. J. Lowe, C. Biateau, and P. Fromme, « Feature-guided waves for monitoring adhesive shear modulus in bonded stiffeners, Ndt E Int, vol.54, pp.96-102, 2013.

V. Pagneux and A. Maurel, « Lamb wave propagation in elastic waveguides with variable thickness, Proc. R. Soc. Math. Phys. Eng. Sci, vol.462, pp.1315-1339, 2006.

B. Hosten, « Bulk heterogeneous plane waves propagation through viscoelastic plates and stratified media with large values of frequency domain, Ultrasonics, vol.29, issue.6, pp.445-450, 1991.

M. J. Lowe, R. E. Challis, and C. W. Chan, « The transmission of Lamb waves across adhesively bonded lap joints, J. Acoust. Soc. Am, vol.107, issue.3, pp.1333-1345, 2000.

H. Lourme, Etude des assemblages collés par ondes guidées ultrasonores: étude expérimentale et modélisation par éléments finis, 2009.

D. Leduc, M. E. , .. El-kettani, L. Attar, M. V. Predoi et al., « Bonding Characterization of a Three-Layer Metal-Adhesive-Metal Using Shear Horizontal Modes of Close Dispersion Curves, Acta Acust. United Acust, vol.103, issue.6, pp.926-931, 2017.

C. Gauthier, M. E. , .. El-kettani, J. Galy, M. Predoi et al., « Lamb waves characterization of adhesion levels in aluminum/epoxy bi-layers with different cohesive and adhesive properties », Int. J. Adhes. Adhes, vol.74, pp.15-20, 2017.

L. Attar, D. Leduc, M. Ech-cherif-el-kettani, J. Galy, P. Valentin et al., Caractérisation de collages structuraux par ondes SH, vol.14, 2018.

J. P. Jones and J. S. Whittier, « Waves at a flexibly bonded interface, J. Appl. Mech, vol.34, issue.4, pp.905-909, 1967.

S. Benyahia-bentadjine, « Mécanismes de formation et propriétés physico-chimiques et mécaniques des interphases epoxy-diamine/métal, 2000.

M. Coulaud, Rôle des interfaces et interphases dans les assemblages collés, 2007.

A. A. Roche, J. Bouchet, and S. Bentadjine, « Formation of epoxy-diamine/metal interphases, Int. J. Adhes. Adhes, vol.22, issue.6, pp.431-441, 2002.

S. Bentadjine, R. Petiaud, A. A. Roche, and V. Massardier, « Organo-metallic complex characterization formed when liquid epoxy-diamine mixtures are applied onto metallic substrates, Polymer, vol.42, issue.14, pp.6271-6282, 2001.

B. Hosten and M. Castaings, « Finite elements methods for modeling the guided waves propagation in structures with weak interfaces, J. Acoust. Soc. Am, vol.117, issue.3, pp.1108-1113, 2005.

S. I. Rokhlin and Y. J. Wang, « Analysis of boundary conditions for elastic wave interaction with an interface between two solids, J. Acoust. Soc. Am, vol.89, issue.2, pp.503-515, 1991.

W. Possart, J. Krüger, C. Wehlack, U. Müller, C. Petersen et al., « Formation and structure of epoxy network interphases at the contact to native metal surfaces, Comptes Rendus Chim, vol.9, issue.1, pp.60-79, 2006.

A. J. Kinloch, M. S. Little, and J. F. Watts, « The role of the interphase in the environmental failure of adhesive joints, Acta Mater, vol.48, pp.4543-4553, 2000.

A. Baltazar, L. Wang, B. Xie, and S. I. Rokhlin, « Inverse ultrasonic determination of imperfect interfaces and bulk properties of a layer between two solids, J. Acoust. Soc. Am, vol.114, issue.3, pp.1424-1434, 2003.

R. Marks, A. Clarke, C. Featherston, C. Paget, R. Pullin et al., Wave interaction with adhesively bonded stiffeners and disbonds using 3D vibrometry, Appl. Sci, vol.6, issue.1, p.12, 2016.

E. and L. Clézio, Diffraction des ondes de Lamb par des fissures verticales, vol.1, 2001.

H. Lamb, On waves in an elastic plate, Proc R Soc Lond A, vol.93, pp.114-128, 1917.

A. H. Nayfeh and D. E. Chimenti, « Free wave propagation in plates of general anisotropic media, J. Appl. Mech, vol.56, issue.4, pp.881-886, 1989.

B. W. Drinkwater, M. Castaings, and B. Hosten, « The measurement of A 0 and S 0 Lamb wave attenuation to determine the normal and shear stiffnesses of a compressively loaded interface, J. Acoust. Soc. Am, vol.113, issue.6, pp.3161-3170, 2003.

S. Her and Y. Lin, « Assessment of adhesive bond strength using the ultrasonic technique, J. Adhes, vol.90, pp.545-554, 2014.

H. Lamb, On the flexure of an elastic plate, Proc. Lond. Math. Soc, vol.1, issue.1, pp.70-91, 1889.

B. A. Auld, Acoustic fields and waves in solids. ????? ???????, 1973.

B. Hosten and M. Castaings, « Surface impedance matrices to model the propagation in multilayered media, Ultrasonics, vol.41, issue.7, pp.501-507, 2003.

M. Bruneau and C. Potel, Materials and Acoustics Handbook, 2013.

W. T. Thomson, « Transmission of elastic waves through a stratified solid medium, J. Appl. Phys, vol.21, issue.2, pp.89-93, 1950.

N. A. Haskell, « The dispersion of surface waves on multilayered media, Bull. Seismol. Soc. Am, vol.43, issue.1, pp.17-34, 1953.

I. Bartoli, A. Marzani, F. L. Di-scalea, and E. Viola, « Modeling wave propagation in damped waveguides of arbitrary cross-section, J. Sound Vib, vol.295, pp.685-707, 2006.

D. R. Mahapatra and S. Gopalakrishnan, « A spectral finite element model for analysis of axial-flexural-shear coupled wave propagation in laminated composite beams, Compos. Struct, vol.59, issue.1, pp.67-88, 2003.

M. V. Predoi, M. Castaings, B. Hosten, and C. Bacon, « Wave propagation along transversely periodic structures, J. Acoust. Soc. Am, vol.121, issue.4, pp.1935-1944, 2007.

B. R. Mace, D. Duhamel, M. J. Brennan, and L. Hinke, « Finite element prediction of wave motion in structural waveguides, J. Acoust. Soc. Am, vol.117, issue.5, pp.2835-2843, 2005.

M. Castaings and M. Lowe, Finite element model for waves guided along solid systems of arbitrary section coupled to infinite solid media, J. Acoust. Soc. Am, vol.123, issue.2, pp.696-708, 2008.

K. L. , Adhesion measurement of thim films, thick films and bulk coatings, Symposium: Headquarters ASTM, 1978.

V. Vlasie and M. Rousseau, « Acoustical validation of the rheological models for a structural bond, Wave Motion, vol.37, issue.4, pp.333-349, 2003.

P. B. Nagy and L. Adler, « Nondestructive evaluation of adhesive joints by guided waves, J. Appl. Phys, vol.66, issue.10, pp.4658-4663, 1989.

J. L. Rose, Ultrasonic waves in solid media cambridge university press, 1999.

J. Imbert, Analyse des structures par éléments finis, 1979.

M. Castaings, C. Bacon, B. Hosten, and M. V. Predoi, « Finite element predictions for the dynamic response of thermo-viscoelastic material structures, J. Acoust. Soc. Am, vol.115, issue.3, pp.1125-1133, 2004.

D. N. Alleyne and P. Cawley, « The interaction of Lamb waves with defects, IEEE Trans. Ultrason. Ferroelectr. Freq. Control, vol.39, issue.3, pp.381-397, 1992.

W. Brockmann, P. L. Geiß, J. Klingen, and K. B. Schröder, Adhesive Bonding: Materials, Applications and Technology, 2009.

S. Y. Park, W. J. Choi, H. S. Choi, H. Kwon, and S. H. Kim, « Recent trends in surface treatment technologies for airframe adhesive bonding processing: a review (1995-2008), J. Adhes, vol.86, issue.2, pp.192-221, 2010.

J. Deruelle, Préparation des surfaces: Introduction », Tech. Ing. Matér. Métalliques, n o M1435, pp.1435-1436, 1998.

M. Barquins and K. Fadel, Adhésion et collage », Découverte, vol.271, pp.31-46, 1999.

P. R. Underhill and D. L. Duquesnay, « The dependence of the fatigue life of adhesive joints on surface preparation, Int. J. Adhes. Adhes, vol.26, issue.2, pp.62-66, 2006.

M. Abel, A. N. Adams, A. J. Kinloch, S. J. Shaw, and J. F. Watts, « The effects of surface pretreatment on the cyclic-fatigue characteristics of bonded aluminium-alloy joints », Int. J. Adhes. Adhes, vol.26, issue.2, pp.50-61, 2006.

R. Develay, Propriétés de l'aluminium et des alliages d'aluminium corroyés », Tech. L'ingénieur Doss. M, vol.440, 1992.

B. B. Johnsen, K. Olafsen, and A. Stori, « Reflection-absorption FT-IR studies of the specific interaction of amines and an epoxy adhesive with GPS treated aluminium surfaces, Int. J. Adhes. Adhes, vol.23, issue.2, pp.155-163, 2003.

L. Attar, D. Leduc, M. V. Predoi, and J. Galy, « Evaluation of the bonding quality in a metal composite structure using lamb waves, vol.26, 2019.

M. Castaings, « SH ultrasonic guided waves for the evaluation of interfacial adhesion, Ultrasonics, vol.54, issue.7, pp.1760-1775, 2014.

J. Ding, B. Wu, and C. He, « Reflection and transmission coefficients of the SH0 mode in the adhesive structures with imperfect interface, Ultrasonics, vol.70, pp.248-257, 2016.

S. Dixon, C. Edwards, and S. B. Palmer, « A laser-EMAT system for ultrasonic weld inspection, Ultrasonics, vol.37, issue.4, pp.273-281, 1999.

K. Arun, R. Dhayalan, K. Balasubramaniam, B. Maxfield, P. Peres et al., « An EMAT-based shear horizontal (SH) wave technique for adhesive bond inspection, AIP Conference Proceedings, vol.1430, pp.1268-1275, 2012.

J. R. Bernstein and J. B. Spicer, « Hybrid laser/broadband EMAT ultrasonic system for characterizing cracks in metals, J. Acoust. Soc. Am, vol.111, issue.4, pp.1685-1691, 2002.

P. Jiang, R. E. Apfel, and E. C. Everbach, « Mixture laws for ultrasonic tissue characterization, J. Acoust. Soc. Am, vol.87, issue.S1, pp.115-115, 1990.

J. Achenbach, Wave Propagation in Elastic Solids, 2012.

D. Royer and E. Dieulesaint, Ondes élastiques dans les solides: propagation libre et guidée. Masson, 1996.

V. Vlasie, S. De-barros, M. Rousseau, and L. Champaney, Ultrasonic rheological model of cohesive and adhesive zones in aluminum joints: validation by mechanical tests, Arch. Appl. Mech, vol.75, pp.220-234, 2006.

, COMSOL Multiphysics Modeling Software, 2018.

M. B. Drozdz, « Efficient finite element modelling of ultrasound waves in elastic media, 2008.

G. Dhatt and J. L. Batoz, Modélisation des structures par éléments finis: poutres et plaques », 1990.

D. Alleyne and P. Cawley, « A two-dimensional Fourier transform method for the measurement of propagating multimode signals, J. Acoust. Soc. Am, vol.89, issue.3, pp.1159-1168, 1991.

P. R. Murray and R. J. Dewhurst, « Application of a laser/EMAT system for using shear and LS mode converted waves, Ultrasonics, vol.40, pp.771-776, 2002.

H. , Acoustic Resonance Scattering, 1992.

R. Fiorito, W. Madigosky, and H. Überall, « Resonance theory of acoustic waves interacting with an elastic plate, J. Acoust. Soc. Am, vol.66, issue.6, pp.1857-1866

S. Derible, « Caracterisation complète des résonances acoustiques par une nouvelle méthode fondée sur le diagramme d'Argand », thesis, 1995.