. Ab-chance-co, Dial torque indicator. Acesso em 29 de april de, 2013.

. Abaqus, Lecture 6 -Adaptive meshing and distortion. Acesso em 14th de, 2005.

. Abaqus, User Manual: Abaqus Theory Guide (Version 6, 2014.

A. , Rocks and soils -Terminology. Rio de Janeiro: Brazilian Technical Standards Association (ABNT), 1995.

A. , ABNT NBR-12131: Piles -static load test -test method, 2006.

J. I. Adams and T. W. Klym, A study of anchorages for transmission tower foundations, Canadian Geotechnical Journal, vol.9, issue.1, pp.89-104, 1972.

A. , NF P94-054 Détermination de la masse volumique de particules solides des sols. Technical standard, French national organization for standardization, 1991.

A. , Sols: reconnaissances et essais, Analyse granulométrique, méthode de tamisage à sec après lavage. Technical standard, French national organization for standardization, 1996.

D. Airey, H. Poulos, and R. Al-douri, Estimation of pile friction degradation from shearbox tests, Geotechnical Testing Journal, vol.15, issue.4, pp.388-392, 1992.

R. Al-dhouri and H. Poulos, Predicted and observed cyclic performance of piles in calcareous sand, Journal of geotechnical engineering, vol.121, issue.1, pp.1-16, 1995.

A. Andreadis and R. Harvey, A design procedure for embedded anchors, Applied Ocean Research, vol.3, issue.4, pp.177-182, 1981.

A. Andreadis, R. Harvey, and E. Burley, Embedded anchor response to uplift loading, Journal of the geotechnical engineering division, vol.107, issue.1, pp.59-78, 1981.

P. Ansell and S. Brown, A Cyclic Simple Shear Apparatus for Dry Granular Materials, Geotechnical Testing Journal, vol.1, issue.2, pp.82-92, 1978.

A. , ASTM D4253 -Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table, 2014.

A. , ASTM D4254 -Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density, 2014.

L. Balachowski, Scale effect in shaft friction from the direct shear interface tests. Archives of civil and mechanical engineering, vol.6, 1980.

O. Benzaria, Contribution à l'étude du comportement des pieux isolés sous chargements cycliques axiaux, 2013.

O. Benzaria, A. Puech, and A. Le-kouby, Cyclic axial load tests on bored piles in dense sands, Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, pp.2323-2326, 2013.

Y. Bian, T. Hutchinson, D. Wilson, D. Laefer, and S. Brandenberg, Experimental investigation of grouted helical piers for use in foundation rehabilitation, Journal of Geotechnical and Geoenvironmental Engineering, vol.134, issue.9, pp.1280-1289, 2008.

M. Blanc and L. Thorel, Effects of cyclic axial loading sequences on piles in sand, Géotechnique Letters, vol.6, issue.2, pp.163-167, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01348548

M. Boulon, Numerical and physical behaviour under monotonous and cyclic loading, 1998.

K. E. Em, Modelling Soil-Water-Structure Interactions, pp.285-293

M. Boulon and P. Foray, Physical and numerical simulation of lateral shaft friction along offshore piles in sand, Third International Conference on Numerical Methods in Offshore Piling, pp.127-147, 1986.

E. Bowman and K. Soga, Mechanisms of set-up of displcaement piles in sand: laboratory creep tests, Canadian Geotechnical Journal, vol.42, issue.5, pp.1391-1407, 2005.

R. Buhler and A. Cerato, Design of dynamically wind-loaded helical piers for small wind turbines, Journal of Performance of Constructed Facilities, vol.24, issue.4, pp.417-426, 2010.

. Cae-analysis, CAE analysis -just another Finite Element Analysis blog. Acesso em 13th de, 2011.

. Cepeagri, Climate of São Paulo state Municipalities. Acesso em 12th de, 2016.

A. Cerato and R. Victor, Effects of long-term dynamic loading and fluctuating water table on helical anchor performance for small wind tower foundations, pp.251-261, 2009.

S. Chan and T. Hanna, Repeated loading on single piles in sand, Journal of the geotechnical engineering division, vol.102, issue.2, pp.171-180, 1980.

S. Chow, C. O'loughlin, R. Corti, C. Gaudin, and A. Diambra, Drained cyclic capacity of plate anchors in dense sand: experimental and theoretical observations, Géotechnique Letters, vol.5, issue.2, pp.80-85, 2015.

S. Clemence, F. ;. Pepe, and A. Smithling, Measurement of lateral stress around multihelix anchors in sand, Dynamic Uplift Capacity of Helical Anchors in Sand. 4th Australia-New Zealand Conference on Geomechanics, vol.7, pp.88-93, 1984.

S. Clemence, L. Crouch, and R. Stephenson, Prediction of uplift capacity for helical anchors in sand, Proceedings of the 2nd Geotechnical Engineering Conference, 1994.

J. Corté, L'essor de la modélisation en centrifugeuse en géotechnique. Revue Française de Géotechnique, vol.48, pp.7-13, 1989.

C. Cremer, A. Pecker, and L. Davenne, Cyclic macro-element for soil-structure interaction: material and geometrical non-linearities, International Journal for Numerical and Analytical Methods in Geomechanics, vol.25, issue.13, pp.1257-1284, 2001.

S. D'aguiar, F. Lopez-caballero, A. Modaressi-farahmand-razavi, and J. Santos, Piles under cyclic loading: study of the friction fatigue and its importance in piles behaviour, Proceedings of the 17th International Conference on Soil Mechanics and Geotechnical Engineering, pp.1313-1316, 2009.

S. D'aguiar, A. Modaressi, J. Santos, and F. Lopez-caballero, Piles under cyclic axial loading: study of the friction fatigue and its importance in pile behavior, Canadian Geotechnical Journal, vol.48, issue.10, pp.1537-1550, 2011.

B. Das, Earth anchors, 1990.

R. De-abreu, Map of São Paulo state, 2006.

J. Dejong, M. Randolph, and D. White, Interface load transfer degradation during cyclic loading: a microscale investigation, Soils and Foundations, vol.43, issue.4, pp.81-93, 2003.

J. Desrues, An introduction to strain localisation in granular media, Proceedings of Winter School les Houches, pp.127-142, 1991.

E. Dickin and C. Leung, Centrifugal model tests on vertical anchor plates, Journal of Geotechnical Engineering, pp.1503-1525, 1983.

P. Doherty, L. Kirwan, K. Gavin, D. Igoe, S. Tyrrell et al., Soil properties at the UCD geotechnical research site at, National Bridge and Concrete Research in Ireland Conference, pp.499-504, 2012.

M. El-sharnouby and M. Naggar, Monotonic and cyclic axial full-scale testing of reinforced helical pulldown micropiles, Proceedings of the 14th Pan-American Conference on Soil Mechanics and Geotechnical Engineering, p.6, 2011.

V. Fioravante, On the shaft friction modelling of non-displacement piles in sand, Soils and Foundations, vol.42, issue.2, pp.23-33, 2002.

E. Flavigny, J. Desrues, and B. Palayer, Le sable d'Hostun RF. Revue française de géotechnique, vol.53, pp.67-70, 1990.

, Scale and boundary effects on calibration chamber pile tests, First International Symposium on Calibration Chamber Testing/ISOCCTl, pp.147-160, 1991.

P. Foray, L. Balachowski, and G. Rault, Scale effect in shaft friction due to the localisation of deformations, International Conference Centrifuge 98, pp.211-216, 1998.

L. Fuglsang, N. Ovesen, W. J. Em, and . Craig, The application of the theory of modelling to centrifuge studies, Centrifuges in Soil Mechanics, 1988.

J. Garnier, Physical modelling in geotechnics: state of the art and recent advantages, Caquot Conference, pp.405-414, 2001.

J. Garnier and D. König, Scale effects in piles and nails loading tests in sand, International Conference Centrifuge 98, pp.205-210, 1998.

K. Gavin and B. Lehane, Base load -displacement response of piles in sand, Canadian Geotechnical Journal, vol.44, issue.9, pp.1053-1063, 2007.

K. Gavin and B. Kelly, Effect of friction fatigue on pile capacity in dense sand, Journal of Geotechnical and Geoenvironmental Engineering, vol.133, issue.1, pp.63-71, 2007.

K. Gavin, P. Doherty, and A. Tolooiyan, Field investigation of the axial resistance of helical piles in dense sand, Canadian Geotechnical Journal, vol.51, issue.11, pp.1343-1354, 2014.

A. M. Ghaly, A. M. Hanna, and M. S. Hanna, Uplift behavior of screw anchors in sand -Part I: dry sand, Journal of Geotechnical Engineering, issue.5, p.117, 1991.

A. Ghaly and S. Clemence, Pullout performance of inclined helical screw anchors in sand, Journal of Geotechnical and Geoenvironmental Engineering, vol.124, issue.7, pp.617-627, 1998.

A. Ghaly and A. Hanna, Experimental and theoretical studies on installation torque of screw anchors, Canadian Geotechnical Journal, vol.28, issue.3, pp.353-364, 1991.

H. Giachetti, A. Peixoto, and G. Mondelli, Comparison between mechanical and electrical cone penetration testing results in tropical soils, vol.27, pp.191-200, 2004.

G. Gudehus and A. Hettler, Cyclic and monotonous model tests in sand, Proceedings of the 10th International Conference on Soil Mechanics and Foundation Engineering, vol.2, pp.211-214, 1981.

A. Hanna, T. Ayadat, and M. Sabry, Pullout resistance of single vertical shallow helical and plate anchors in sand, Geotechnical and geological engineering, vol.25, issue.5, pp.559-573, 2007.

T. Hanna and M. Al-mosawe, Performance of prestressed anchors under slow repeated loadings, Proceedings of the 10th International Conference on Soil Mechanics and Foundation Engineering, vol.2, pp.127-133, 1981.

T. Hanna, E. Sivapalan, and A. Senturk, Behaviour of dead anchors subjected to repeated and alternating loads, Ground Engineering, vol.11, issue.3, pp.28-34, 1978.

K. Healy, Journal of the soil mechanics and foundations division, vol.97, pp.1615-1622, 1971.

E. Heerema, Predicting pile drivability: heather as an illustration of the "friction fatigue" theory, Proceedings of the European Offshore and Petroleum Conference and Exhibition, pp.413-423, 1978.

S. Helwany, Applied soil mechanics with ABAQUS applications, 2007.

A. Hettler, Possibilities and limitations of 1-g model techniques, Physical Modelling in Geotechnics, vol.1, pp.135-140, 2010.

G. Houlsby, How the dilatancy of soils affects their behaviour, Proceedings of the 10th European Conference on Soil Mechanics and Foundation Engineering, pp.1189-1202, 1991.

R. Hoyt and S. Clemence, Uplift capacity of helical anchors in soil, Proceedings of the 12th International Conference on Soil Mechanics and Foundation Engineering, pp.13-18, 1989.

D. Igoe, P. Doherty, and K. Gavin, The development and testing of an instrumented open-ended model pile, Geotechnical Testing Journal, vol.33, issue.1, pp.1-12, 2010.

K. Ishihara, F. Tatsuoka, and S. Yasua, Undrained deformation and liquefaction of sand under cyclic stresses, Soils and Foundations, vol.15, issue.1, pp.29-44, 1975.

M. Jamiolkowski, D. Lo-presti, and M. Manassero, Evaluation of relative density and shear strength of sands from CPT and DMT. Soil behavior and soft ground construction, vol.7, pp.201-238, 2003.

R. Jardine, Some observations on the kinematic nature of soil stiffness, Soils and Foundations, vol.32, issue.2, pp.111-124, 1992.

R. Jardine and J. Standing, Field axial cyclic loading experiments on piles driven in sand. soils and foundations, vol.52, pp.723-736, 2012.

R. Jardine and R. Standing, Pile load testing performed for HSE cyclic loading study at Dunkirk, France. Two Volumes. Offshore Technology Report, Health and Safety Executive, 2000.

S. Kanai, A seismic retrofitting application by means of multihelix micropiles. 23th, 2007.

K. Karlsrud, F. Nadim, and T. Haugen, Piles in clay under cyclic axial loading: field tests and computational modeling, Proceedings of the 3rd International Conference of Numerical Methods in Offshore Piling, pp.165-190, 1986.

N. Kim and D. Kim, The role of the physical modeling in the design of geotechnical systems, Proceedings of the 1st International Workshop on Design in Civil and Environmental Engineering, pp.11-18, 2011.

R. Klinkvort, O. Hededal, and S. Springman, Scaling issues in centrifuge modelling of monopiles, International Journal of Physical Modelling in Geotechnics, vol.13, issue.2, pp.38-49, 2013.

A. Komatsu, Development on battered pile with screw pile method (NS-ECO pile), International Workshop on Recent Advances of Deep Foundations, pp.253-257, 2007.

F. Kulhawi, Uplift behavior of shallow soil anchors -an overview: uplift behavior of anchor foundations in soil. Session sponsored by the Geotechnical Engineering Division of the American Society of Civil Engineers in conjunction with the ASCE Convention, pp.1-25, 1985.

B. Küs, Pluviation des sables, DEA report, 1992.

C. Lau, Scale effects in tests on footings, 1988.

L. Kouby, A. Canou, J. Dupla, and J. , Behaviour of model piles subjected to cyclic axial loading, Proceedings of the International Conference on Cyclic Behaviour of Soils and Liquefaction Phenomena, pp.159-166, 2004.

B. Lehane, C. Gaudin, and J. Schneider, Scale effects on tension capacity for rough piles buried in dense sand, Géotechnique, vol.55, issue.10, pp.709-719, 2005.

B. Lehane, R. Jardine, A. Bond, and R. Frank, Mechanism of shaft friction in sand from instrumented pile test, Journal of Geotechnical Engineering, vol.119, issue.1, pp.19-35, 1993.

C. Levesque, Centrifuge modelling of helical anchors in sand, 2002.

Z. Li, M. Bolton, and S. Haigh, Cyclic axial behaviour of piles and pile groups in sand, Canadian Geotechnical Journal, vol.49, issue.9, pp.1074-1087, 2012.

S. Machado, Application of elastoplasticity concepts to non-saturated soils, 1998.

P. Menétrey and K. Willam, Triaxial failure criterion for concrete and its generalization, ACI structural Journal, vol.92, issue.3, pp.311-318, 1995.

R. Merifield, Ultimate uplift capacity of multiplate helical type anchors in clay, Journal of geotechnical and geoenvironmental engineering, vol.137, issue.7, pp.704-716, 2011.

M. P. Mitsch and S. P. Clemence, The uplift capacity of helical anchors in sand. Uplift behavior of anchor foundations in soil, pp.26-47, 1985.

S. Miura and S. Toki, A sample preparation method and its effect on static and cyclic deformation-strength properties of sand, Soils and Foundations, vol.22, issue.1, pp.61-77, 1982.

G. Mortara, A. Mangiola, and V. Ghionna, Cyclic shear stress degradation and postcyclic behaviour from sand-steel interface direct shear tests, Canadian Geotechnical Journal, vol.44, issue.7, pp.739-752, 2007.

Z. Mosquera, C. Tsuha, J. Schiavon, and L. Thorel, Discussion of "Field investigation of the axial resistance of helical piles in dense sand, Canadian Geotechnical Journal, vol.52, issue.8, pp.1190-1194, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01252526

N. Rao, S. Prassad, M. Shetty, M. Joshi, and V. , Uplift capacity of screw pile anchor, Geotechnical Engineering, vol.20, issue.2, pp.35-50, 1989.

N. Ovesen, The scaling law relationship. Panel discussion, 7th European Conference on Soil Mechanics and Foundaton Engineering, vol.4, pp.319-323, 1979.

N. Ovesen, Centrifuge tests of the uplift capacity of anchors, 10th International Conference on Soil Mechanics and Foundation Engineering, pp.717-722, 1981.

H. Perko, Energy method for predicting the installation torque of helical foundations and anchors, 2000.

H. Perko, Helical piles: a practical guide to design and installation, 2009.

H. Perko, J. Stan, and P. Rupiper, Helix pier engineering handbook 2000. INC. Worldwide Helix Pier Distributors, 2000.

R. Petereit, The static and cyclic pullout behavior of plate anchors in fine saturated sand, 1987.

H. Poulos, Influence of cyclic loading on axial pile response, Proceedings of the 2nd International Conference on Numerical Methods in Offshore Piling, vol.1, pp.419-440, 1982.

H. Poulos, Cyclic stability diagram for axially loaded piles, Journal of Geotechnical Engineering, vol.114, issue.8, pp.877-895, 1988.

H. Poulos, Cyclic axial loading analysis of piles in sand, Journal of Geotechnical Engineering, vol.115, issue.6, pp.839-852, 1989.

H. Poulos and E. Chua, Bearing capacity of foundations on calcareous sand, Proceedings of the 11th International Conference on Soil Mechanics and Foundation Engineering, vol.3, pp.1619-1622, 1985.

A. Puech, O. Benzaria, L. Thorel, J. Garnier, P. Foray et al., Cyclic stability diagrams for piles in sands, Proceedings of TC 209 Workshop 18th ICSMGE. Design for cyclic loading: piles and other foundations, pp.85-88, 2013.

S. Rimoy, Ageing and axial cyclic loading studies of displacement piles in sands, 2013.

S. Rimoy and R. Jardine, On strain accumulation in a silica sand under creep and low level cyclic loading, Proceedings of the Fifth International Symposium on Deformation Characteristics of Geomaterials, pp.463-470, 2011.

S. Rimoy, R. Jardine, and J. Standing, Displacement response to axial cycling of piles driven in sand, Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, vol.166, issue.2, pp.131-146, 2013.

F. Rosquët, Pieux sous charge latérale cyclique, 2004.

M. Sakr, Relationship between installation torque and axial capacities of helical piles in cohesionless soils, Canadian Geotechnical Journal, vol.52, issue.6, pp.747-759, 2014.

J. Santos-filho, Effects of installation of helical piles in tropical soils. MSc dissertation, 2014.

J. Schiavon, J. Santos-filho, C. Tsuha, and L. Thorel, The occurrence of residual stresses in helical piles, From Fundamentals to Applications in Geotechnics: Proceedings of the 15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering, p.8, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01252490

D. White and M. Bolton, Displacement and strain paths during plane-strain model pile installation in sand, Géotechnique, vol.54, issue.6, pp.375-397, 2004.

D. White and B. Lehane, Friction fatigue on displacement piles in sand, Géotechnique, vol.54, issue.10, pp.645-658, 2004.

T. Wichtmann, Explicit accumulation model for non-cohesive soils under cyclic loading, 2005.

T. Wichtmann and T. Triantafyllidis, Influence of a cyclic and dynamic loading history on dynamic properties of dry sand, part II: cyclic axial preloading, Soil Dynamics and Earthquake Engineering, vol.24, issue.11, pp.789-803, 2004.

T. Wichtmann, A. Niemunis, and T. Triantafyllidis, Strain accumulation in sand due to cyclic loading: drained triaxial tests, Soil Dynamics and Earthquake Engineering, vol.25, issue.12, pp.967-979, 2005.

H. Yamaguchi, T. Kimura, and N. Fujii, On the scale effect of footings in dense sand, Proceedings of the 9th International Conference on Soil Mechanics and Foundation Engineering, pp.795-798, 1977.

T. Yoshida and F. Tatsuoka, Deformation property of shear band in sand subjeted to plane strain compression and its relation to particle characteristics, 14th International Conference on Soil Mechanics and Foundation Engineering, vol.1, pp.237-240, 1997.

T. Yoshimi and T. Kishida, A ring torsion apparatus for evaluating friction between soil and metal surfaces, Geotechnical Testing Journal, vol.4, issue.4, pp.145-152, 1981.

T. Youd, Compaction of sands by repeated shear straining, Journal of the Soil Mechanics and Foundations Division, vol.98, issue.SM7, pp.709-725, 1972.

D. Zhang, Predicting capacity of helical screw piles in Alberta soils, 1999.

J. I. Adams and W. T. Klym, A study of anchorages for transmission tower foundations, Canadian Geotechnical Journal, vol.9, issue.1, pp.89-104, 1972.

L. Ba?achowski, Scale effect in shaft friction from the direct shear interface tests, Archives of Civil and Mechanical Engineering, vol.6, issue.3, pp.13-28, 2006.

Y. Bian, T. C. Hutchinson, and D. Wilson, Experimental investigation of grouted helical piers for use in foundation rehabilitation, Journal of Geotechnical and Geoenvironmental Engineering, vol.134, issue.9, pp.1280-1289, 2008.

B. W. Byrne and G. T. Houlsby, Helical piles: an innovative foundation design option for offshore wind turbines, Philosophical Transactions Royal Society A, vol.373, 2015.

C. Sp and P. Fd, Measurement of lateral stress around multihelix anchors in sand, Geotechnical Testing Journal, vol.7, issue.3, pp.145-152, 1984.

J. F. Corté and J. Garnier, Une centrifugeuse pour la recherche en géotechnique, Bulletin de Liaison des Laboratoires des Ponts et Chaussées, vol.146, pp.5-28, 1986.

E. A. Dickin, Uplift behavior of horizontal anchor plates in sand, Journal of Geotechnical Engineering, vol.114, issue.11, pp.1300-1317, 1988.

E. A. Dickin and C. F. Leung, Centrifugal model tests on vertical anchor plates, Journal of Geotechnical Engineering, vol.119, issue.12, pp.1503-1525, 1983.

V. Fioravante, On the shaft friction modelling of non-displacement piles in sand, Soils and Foundations, vol.42, issue.2, pp.23-33, 2002.

E. Flavigny, J. Desrues, and B. Palayer, Le sable d'Hostun RF, Revue Française de Géotechnique, vol.53, pp.67-70, 1990.

P. Foray, Scale and boundary effects on calibration chamber pile tests, Proceedings of the 1st International Symposium on Calibration Chamber Testing, pp.147-160, 1991.

P. Foray, L. Balachowski, and G. Rault, Scale effect in shaft friction due to the localisation of deformations, Proceedings of the International Conference Centrifuge 98, vol.1, pp.211-216, 1998.

J. Garnier and D. König, Scale effects in piles and nails loading tests in sand, Proceedings of the International Conference Centrifuge 98, vol.1, pp.205-210, 1998.

K. Gavin, P. Doherty, and A. Tolooiyan, Field investigation of the axial resistance of helical piles in dense sand, Canadian Geotechnical Journal, vol.51, issue.11, pp.1343-1354, 2014.

A. M. Ghaly and C. Sp, Pullout performance of inclined helical screw anchors in sand, Journal of Geotechnical and Geoenvironmental Engineering, vol.124, issue.7, pp.617-627, 1998.

A. M. Ghaly, A. M. Hanna, and M. S. Hanna, Uplift behavior of screw anchors in sand -Part I: dry sand, Journal of Geotechnical Engineering, vol.117, issue.5, pp.773-793, 1991.

G. T. Houlsby, How the dilatancy of soils affects their behaviour, Proceedings of the 10th European Conference on Soil Mechanics and Foundation Engineering, vol.4, pp.1189-1202, 1991.

R. M. Hoyt and C. Sp, Uplift capacity of helical anchors in soil, Proceedings of the 12th International Conference on Soil Mechanics and Foundation Engineering, vol.1, pp.1019-1022, 1989.

R. T. Klinkvort, O. Hededal, and S. M. Springman, Scaling issues in centrifuge modelling of monopiles, International Journal of Physical Modelling in Geotechnics, vol.13, issue.2, pp.38-49, 2013.

C. K. Lau, Scale effects in tests on footings, 1988.

C. L. Levesque, Centrifuge modelling of helical anchors in sand, 2002.

A. J. Lutenegger, Uplift of shallow single-helix screw-piles, Proceedings of the 1st International Geotechnical Symposium on Helical Foundations. International Society for Helical Foundations, pp.200-210, 2013.

M. P. Mitsch and C. Sp, The uplift capacity of helical anchors in sand, Uplift behavior of anchor foundations in soil, pp.26-47, 1985.

N. Rao, S. Prasad, Y. Shetty, and M. D. , Uplift capacity of screw pile, Geotechnical Engineering, vol.20, issue.2, pp.139-159, 1989.

N. K. Ovesen, The scaling law relationship, Proceedings of the 7th European Conference on Soil Mechanics and Foundation Engineering, vol.4, pp.319-323, 1979.

N. K. Ovesen, Centrifuge tests of the uplift capacity of anchors, Proceedings of the 10th International Conference on Soil Mechanics and Foundation Engineering, vol.1, pp.717-722, 1981.

M. Sakr, Relationship between installation torque and axial capacities of helical piles in cohesionless soils, Canadian Geotechnical Journal, vol.52, issue.6, pp.747-759, 2014.

J. A. Schiavon, Experimental investigation on the helical pile behaviour under cyclic tensile loading, 2016.

G. Spagnoli and K. Gavin, Helical piles as a novel foundation system for offshore piled facilities, Proceedings of the 2015 SPE Abu Dhabi International Petroleum Exhibition and Conference, 2015.

G. Spagnoli, K. Gavin, and C. Brangan, In situ and laboratory tests in dense sand investigating the helixto-shaft ratio of helical piles as a novel offshore foundation system, Proceedings of the 3rd International Symposium on Frontiers in Offshore Geotechnics, vol.1, pp.643-648, 2015.

K. Tagaya, R. F. Scott, and H. Aboshi, Pullout resistance of buried anchor in sand, Soils and Foundations, vol.28, issue.3, pp.114-130, 1988.

F. Tatsuoka, S. Goto, and T. Tanaka, Particle size effects on bearing capacity of footing on granular material, Proceedings of the International Symposium on Deformation and Progressive Failure in Geomechanics, pp.133-138, 1997.

L. Thorel, G. Rault, and J. Garnier, Mesures en macrogravité sur modèles réduits d'ouvrages géotechniques, Bulletin des Laboratoires des Ponts et Chaussées, vol.273, pp.93-131, 2008.