G. L. Argawal, Foil Air/gas Bearing Technology-An Overview, ASME-GT, vol.347, 1997.

S. A. Howard, Rotordynamicas ans design methods of an oil-free turbocharger, Tribology Transactions, issue.1, pp.174-179, 1999.

D. Lee, H. Lim, B. Choi, B. Kim, J. Park et al., Thermal Behavior of Radial Foil Bearings Supporting an Oil-Free Gas Turbine : Design of the Cooling Flow Passage and Modeling of the Thermal System, Journal of Engineering for Gas Turbines and Power, vol.139, pp.61902-61903, 2017.

M. H. Chen, R. Howarth, B. Geren, J. C. Theylacker, and W. M. Soyars, Application of Foil Bearings to Helium Turbocompressor, Proceedings of the 30th Turbomachinery Symposium, 2001.

M. J. Braun, F. K. Choy, M. Dzodzo, and J. Hsu, Steady-State and Transient Dynamic Simulation of a Continuous Foil Bearing, STLE Tribology Transactions, issue.2, pp.322-329, 1996.

C. Dellacorte and M. J. Valco, Load Capacity Estimation of Foil Air Journal Bearings for Oil-Free Turbomachinery Applications, Tribology Transactions, issue.4, pp.795-801, 2000.

S. A. Howard, C. Dellacorte, M. J. Valco, J. M. Prahl, and H. Heshmat, Dynamic Stiffness and Damping Charactesristics of High Temperature Air Foil Journal Bearing, STLE/ASME Int. Joint Tribol. Conf. Of Sans Francisco, 2001.

Z. Kozanecki, J. Lagodzinski, E. Tkacz, and K. Miazga, Oil-free bearings for hermetic high-speed turbomachinery, J. Vib. Eng. Technol, vol.2015, issue.2

L. Lez, S. Arghir, M. Frêne, and J. , A Dynamic Model for Dissipative Structures Used in Bump-Type Foil Bearings, Tribol. Trans, issue.5, pp.562-572, 2009.

H. Heshmat, Operation of Foil Bearings Beyond the Bending Critical Mode, ASME J. of Tribology, vol.122, pp.192-198, 2000.

M. Branagan, D. Griffin, C. Goyne, and A. Untaroiu, Compliant Gas Foil Bearings and Analysis Tools, J. Eng. Gas Turbines Power, vol.2016, issue.5, p.54001

H. Heshmat, J. A. Walowit, and O. Pinkus, Analysis of Gas-Lubricated Compliant Thrust Bearings, J. of Lubrication Tech, issue.4, pp.638-646, 1983.

H. Heshmat, J. A. Walowit, and O. Pinkus, Analysis of Gas-Lubricated Foil Journal Bearings, J. of Lubrication Tech, issue.4, pp.647-655, 1983.

I. Iordanoff, Analysis of an Aerodynamic Compliant Foil Thrust Bearing: Method for a Rapid Design, J. Tribol, issue.4, pp.816-822, 1999.

J. P. Peng and M. Carpino, Calculation of Stiffness and Damping Coefficients for Elastically Supported Gas Foil Bearings, J. Tribol, issue.1, pp.20-27, 1993.

D. Rubio and L. San-andres, Structural Stiffness, Dry Friction Coefficient, and Equivalent Viscous Damping in a Bump-Type Foil Gas Bearing, J. Eng. Gas Turbines Power, vol.129, issue.2, pp.494-502, 2007.

D. Kim and S. Park, Hydrostatic Air Foil Bearings: Analytical and Experimental Investigations, Tribol. Int, issue.3, pp.413-425, 2009.

B. Bou-said, G. Grau, and I. Iordanof, On Nonlinear Rotor Dynamic Effects of Aerodynamic Bearings With Simple Flexible Rotors, J. Eng. Gas Turbines. Power, issue.1, p.12503, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00378163

P. Bonello and H. M. Pham, The efficient computation of the nonlinear dynamic response of a foil-air bearing rotor system, J. Sound and Vibration, issue.15, pp.3459-3478, 2014.

M. Carpino, L. A. Medvetz, and J. P. Peng, Effects of Membrane Stresses in the Prediction of Foil Bearing Performance, Tribology Transactions, issue.1, pp.43-50, 1994.

J. P. Peng and M. Carpino, Finite Element Approach to the Prediction of Foil Bearing Rotor Dynamic Coefficients, J. Tribol, vol.119, issue.1, pp.85-90, 1997.

M. Carpino and G. Talmage, A Fully Coupled Finite Element Formulation for Elastically Supported Foil Journal Bearings, Tribology Transactions, vol.46, issue.4, pp.560-565, 2003.

R. J. Bruckner, Simulation and Modeling of the Hydrodynamic, Thermal and Structural Behavior of Foil Thrust Bearings. Doctoral Dissertation, 2004.

L. San-andrés and T. H. Kim, Analysis of gas foil bearings integrating FE top foil models, Tribol. Int, issue.1, pp.111-120, 2009.

D. Kim and S. Park, Hydrostatic Air Foil Bearings: Analytical and Experimental Investigations, Tribol. Int, issue.3, pp.413-425, 2009.

B. Nielsen and I. F. Santos, Transient and steady state behavior of elasto-aerodynamic air foil bearings, considering bump foil compliance and top foil inertia and flexibility: A numerical investigation, Proc. IMechE. Part J: J. Eng. Tribol, vol.2017, issue.0, pp.1-19

T. Leister, C. Baum, and W. Seemann, Computational Analysis of Foil Air Journal Bearings Using a Runtimeefficient Segmented Foil Model, J. Fluids Eng, vol.2018, issue.2, p.21115
URL : https://hal.archives-ouvertes.fr/hal-01891326

L. Lez, S. Arghir, M. Frêne, and J. , Static and Dynamic Characterization of a Bump-Type Foil Bearing Structure, J. Tribol, issue.1, pp.75-83, 2007.

K. Feng and S. Kaneko, Analytical Model of Bump-Type Foil Bearings Using à Link-Spring Structure and a Finite-Element Shell Model, J. Tribol, vol.2010, issue.2, p.21706

R. Ku, C. P. Heshmat, and H. , Compliant Foil Bearing Structural Stiffness Analysis-Part 1: Theoretical Model Including Strip and Variable Bump Foil Geometry, J. Tribol, vol.114, issue.2, pp.394-400, 1992.

D. Lee, Y. Kim, and K. W. Kim, The static performance analysis of foil journal bearings considering three-dimensional shape of the foil structure, J. Tribol, issue.3, p.31102, 2008.

D. H. Lee, Y. C. Kim, and K. W. Kim, The Dynamic Performance Analysis of Foil Journal Bearings Considering Coulomb Friction: Rotating Unbalance Response, Tribology Transactions, vol.52, issue.2, pp.146-156, 2009.

D. H. Lee, Y. C. Kim, and K. W. Kim, The Effect of Coulomb Friction on the Static Performance of, Foil Journal Bearings. Tribol. Int, vol.2010, pp.1065-1072

A. Lehn, M. Mahner, and B. Schweizer, Elasto-gasdynamic modeling of air foil thrust bearings with a twodimensional shell model for top and bump foil, Tribol Int, vol.100, pp.48-59, 2015.

C. Li, J. Du, and Y. Yao, Modeling of a multi-layer foil gas thrust bearing and its load carrying mechanism study, Tribol. Int, vol.114, pp.172-185, 2017.

L. Barzem, B. Bou-said, J. Rocchi, and G. Grau, Aero-elastic bearing effects on rotor dynamics: a numerical analysis, Lubrication Science, vol.25, pp.463-478, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00943893

J. J. Kalker, Three Dimensional Elastic Bodies in Rolling Contact, p.314, 1990.

J. S. Larsen, A. C. Varela, and I. F. Santos, Numerical and experimental investigation of bump foil mechanical behavior, Tribol. Int, vol.74, pp.46-56, 2014.

D. H. Lee, Y. C. Kim, and K. W. Kim, The effect of Coulomb friction on the static performance of foil journal bearings, Tribology International, vol.43, pp.1065-1072, 2010.

Y. M. Temis, M. Y. Temis, and A. B. Meshcheryakov, Gas-dynamics Foil Bearing Model, J. Friction and Wear, issue.3, pp.212-220, 2011.

J. Liu and F. Du, Simulation of Compliant Bump Foil Journal Bearing Using Coupled Reynolds Equation and Finite Element Model Method, Advanced Materials Research, vol.2012, pp.2499-2503

G. Zywica, The dynamic performance analysis of the foil bearing structure, Acta Mechanica at Automatica, vol.2013, issue.1, p.7

A. Fatu and M. Arghir, Numerical Analysis of the Impact of Manufacturing Errors on the Structural Stiffness of Foil Bearings, J. Eng. Gas Turbines Power, vol.2018, issue.4, p.41506

L. Lez, S. Arghir, M. Frêne, and J. , A New Bump-Type Foil Bearing Structure Analytical Model, J. Eng Gas Turbines Power, vol.129, issue.4, pp.1047-1057, 2007.

E. P. Petrov and D. J. Ewins, Generic Friction Models for Time-Domain Vibration Analysis of Bladed Disks, J. of Turbomachinery, vol.126, issue.4, pp.184-192, 2004.

L. Lez, S. Arghir, M. Frêne, and J. , A Dynamic Model for Dissipative Structures Used in Bump-Type Foil Bearings, Tribol. Trans, issue.5, pp.562-572, 2009.

P. Hryniewicz, M. Wodtke, A. Olszewski, and R. Rzadkowski, Structural Properties of Foil Bearings : A Closed Form Solution Validated with Finite Element Analysis, Tribology Transactions, vol.52, issue.4, pp.435-446, 2009.

A. M. Gad and S. Kaneko, A New Structural Stiffness Model for Bump-Type Foil Bearings: Application to Generation II Gas Lubricated Foil Thrust Bearing, J. Tribol, vol.2014, issue.4, p.41701

R. Hoffmann, O. Munz, T. Pronobis, E. Barth, and R. Liebich, A valid method of gas foil bearing parameter estimation: A model anchored on experimental data, J. Mechanical Engineering Science, vol.2016, issue.0, pp.1-18

V. Osmanski, S. Larsen, J. S. Santos, and I. F. , A fully coupled air foil bearing model considering frictionTheory & experiment, J. of Sound and Vibration, vol.400, pp.660-679, 2017.

J. S. Larsen, Nonlinear Analysis of Rotors Supported by Air Foil Journal Bearings-Theory & Experiments, 2014.

K. Shalash and J. Schiffmann, On the manufacturing of compliant foil bearings, vol.25, pp.357-368, 2017.

K. Shalash and J. Schiffmann, Comparative Evaluation of Foil Bearings with Different Compliant Structures for Improved Manufacturability, Proceedings of ASME Turbo Expo: Turbine Technical Conference and Exposition, vol.2017, pp.2017-63615

L. Barzem, Analyse théorique et expérimentale de la dynamique de rotor sur paliers à feuilles lubrifié par l'air, Thèse soutenue au LaMCoS, 2011.

V. Constantinescu, Analysis of Bearings Operating in Turbulent Regime, Journal Basic Eng, vol.82, pp.139-159, 1962.

C. Ng and C. Pan, A Linearized Turbulent Lubrication Theory Analysed from Law of Wall, Taking into Account Turbulent Shear Flow, Journal of Basic Eng, vol.87, pp.675-682, 1965.

H. Elrod and C. Ng, A Theory for Turbulent Films and its Application to bearings, Journal of Lubr. Technol, vol.86, pp.346-362, 1967.

M. Carpino and G. Talmage, A fully Coupled Finite Element Formulation for Elastically Supported Foil Journal Bearings, Tribology Transactions, vol.46, pp.560-565, 2003.

Z. Huo, K. Feng, T. Liu, P. Lyu, and T. Zhang, Nonlinear dynamic analysis of rigid rotor supported by gas foil bearings: Effects of gas film and foil structure on subsynchronous vibrations. Mechanical Systems and Signal Proceeding, vol.107, pp.549-566, 2018.

B. Schweizer and M. Sievet, Nonlinear oscillations of automotuve turbocharger, Journal of Sound and Vibration, vol.321, pp.955-975, 2009.

F. Balducchi, Analyse expérimentale des paliers et des butées aérodynamiques à feuilles, 2006.

L. Lez and S. , Caractéristiques statiques et dynamiques des paliers à feuilles, 2007.

A. Muszynska and . Rotordynamics, , 2005.

A. Muszynska, Stability of Whirl and Whip in Rotor/Bearing Systems, Journal of Sound and Vivration, issue.1, pp.49-64, 1988.

J. W. Lund, Calculation of stiffness and damping properties of gas bearings, Journal of Lubrication Technology, pp.793-804, 1968.

T. H. Kim and L. San-andres, Effect of Side Feed Pressurization on the Dynamic Performance of Gas Foil Bearings: A Model Anchored to Test Data, J. Eng. Gas Turbines Power, issue.1, p.12501, 2009.

K. Ryu, Prediction of Axial and Circumferential Flow Conditions in a High Temperature Foil Bearing With Axial Cooling Flow, J. Eng. Gas Turbines Power, vol.2012, issue.9, p.94503

J. Lagodzinski and P. Zielinski, A combined numerical-experimental model of air foil bearing compliant structure, Transactions of the Institute of Fluid-Flow Machinery, vol.133, pp.117-129, 2016.

M. F. Bin-hassan and P. Bonello, A new modal-based approach for modelling the bump foil structure in the simultaneous solution of foil-air bearing rotor dynamic problems, Journal of Sound and Vibration, vol.396, pp.255-273, 2017.

J. S. Larsen and I. F. Santos, Von Osmanski, S. Stability of rigid rotors supported by air foil bearings: Comparison of two fundamental approaches, Journal of Sound and Vibration, vol.381, pp.179-191, 2016.

D. Kim, Parametric studies on static and dynamic performance of air foil bearings with different top foil geometries and bump stiffness distributions, J. Tribol, vol.129, pp.354-364, 2007.

T. H. Kim and L. San-andrés, Analysis of advanced gas foil bearings with piecewise linear elastic supports, Tribology International, vol.40, pp.1239-1245, 2007.

P. Vleugels, T. Waumans, J. Peirs, F. Al-bender, and D. Reynaerts, High-speed bearings for micro gas turbines: stability analysis of foil bearings, Journal of Micromechanics and Microengineering, vol.16, pp.282-289, 2006.

R. Hoffmann, T. Pronobis, and R. Liebich, The impact of modified corrugated bump structures on the rotor dynamic performance of gas foil bearings, Proccedings of ASME Turbo Expo, p.7, 2014.

R. Hoffmann, T. Pronobis, and R. Liebich, Non-linear stability analysis of a modified gas foil bearing structure, Proceedings of the 9th IFToMM International Conference on Rotor Dynamics, pp.1259-1276, 2015.

J. P. Peng and M. Carpino, Calculation of stiffness and damping coefficients for elastically supported gas foil bearings, J. Tribol, vol.115, pp.20-27, 1993.

D. Kim, Parametric studies on static and dynamic performance of air foil bearings with different top foil geometries and bump stiffness distributions, J. Tribol, vol.129, pp.354-364, 2007.

D. H. Lee, Y. C. Kim, and K. W. Kim, The Dynamic Performance Analysis of Foil Journal Bearings Considering Coulomb Friction : Rotating Unbalance Response, Tribology Transactions, vol.52, pp.146-156, 2009.

J. W. Lund, Review of the Concept of Dynamic Coefficients for Fluid Film Journal Bearings, ASME J. of Tribology, vol.109, pp.37-41, 1987.

J. S. Larsen, B. B. Nielsen, and I. F. Santos, On the Numerical Simulation of Nonlinear Transient Behavior of Compliant Air Foil Bearings, SIRM 2015-11th International Conference on Vibrations in Rotating Machines, 2015.

H. M. Pham and P. Bonello, Efficient techniques for the computation of the nonlinear dynamics of a foil-air bearing rotor system, ASME TurboExpo : Turbine Technical Conference and Exposition, p.7, 2013.

J. S. Laresen and I. F. Sanstos, On the nonlinear steady-state response of rigid rotors supported by air foil bearings-Theory and experiments, Journal of Sound and Vibration, vol.346, pp.284-297, 2015.

R. Hoffmann and R. Liebich, Characterisation and calculation of nonlinear vibrations in gas foil bearing systems-An experimental and numérical investigation, vol.412, pp.289-409, 2017.

K. Feng and Z. Guo, Prediction of dynamic characteristics of a bump-type foil bearing structure with consideration of dynamic friction, vol.57, pp.230-241, 2014.

C. Canudas-de-wit, H. Olsson, K. J. Astrom, and P. Lischinsky, A New Model for Contral of Systems with Friction, IEEE Transactions on Automatic Control, issue.3, pp.419-425, 1995.

Z. Guo, K. Feng, T. Liu, P. Lyu, and T. Zhang, Nonlinear dynamic analysis of rigid rotor supported by gas foil bearings: Effects of gas film and foil structure on subsynchronous vibrations. Mechanical Systems and Signal Processing, vol.107, pp.549-566, 2018.

T. Leister, C. Baum, and W. Seemann, On the Importance of Frictional Energy Dissipation in the Prevention of Undesirable Self-Excited Vibrations in Gas Foil Bearing Rotor Systems. TECHNISCHE MECHANIK, vol.37, pp.280-290, 2017.

T. Leister, S. Bard, and W. Seemann, A Minimal Dynamic Structure Model Considering Dry Friction Energy Dissipation in Refrigerant-Lubricated Gas Foil Bearings, p.5, 2018.

P. Wriggers and G. Zavarise, Computational Contact Mechanics, vol.518, pp.195-226, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00466790

G. Zavarise, P. Wriggers, and U. Nackenhorst, A Guide for Engineers to Computational Contact Mechanics

, TCN Series on Simulation Based Engineering and Science, vol.176

K. N. Tong, Theory of Mechanical Vibrations, Chapters 2&3, 1960.

J. W. Demmel, A Supernodal Approach to Sparse Partial Pivoting, SIAM, J. Matrix Analysis and Applications, vol.20, issue.3, pp.720-755, 1999.

J. A. Greenwood and J. B. Williamson, Contact of Nominally Flat Surfaces, Proc. R. Soc. Lond. A, vol.295, pp.300-319, 1966.

N. Patir and H. S. Cheng, Application of Average Flow Model to Lubrication Between Rough Sliding Surfaces, Journal of Lubrication Technology, vol.101, pp.220-229, 1979.

A. Mariot, Analyse théorique et expérimentale des joints d'étanchéité à bague flottante et des joints rainurés segmentés, 2015.

B. Nadian, A unified tribological model for different regimes of lubrication and rub/impact phenomena in rotor dynamics, 1995.

L. Rudloff, M. Arghir, O. Bonneau, and P. Matta, Experimental Analyses of A First Generation Foil Bearing. Start-Up Torque and Dynamic Coefficients, ASME J. Eng. Gas Turbines Power, issue.9, pp.92501-92510, 2011.

L. Rudloff, Etudes expérimentales des paliers aérostatiques hybrides et des paliers aérodynamiques à feuilles, 2011.

D. Ruscitto, J. Mc-cormick, and S. Gray, Hydrodynamic Air Lubricated Compliant Surface Bearing for an Automotive Gas Turbine Engine I-Journal Bearing Performance, p.135368, 1978.

, ABAQUS Unified FEA: Complete Solutions for Realistic Simulation, Dassault Systèmes, 2016.

S. Wu, R. Gu, and L. , Introduction to the Explicit Finite Element Method for Nonlinear Transient Dynamics, 2012.

M. Friswell, J. Penny, S. Garvey, and A. Lees, Dynamics Of Rotating Machines, 2010.