A. Figure and . Conseil, 1: Bending steps of Wirelaid inductor ? [1] Commission Européenne, 2016.

, IPCC special report on the impacts of global warming of 1.5°C -Summary for policy makers, 2018.

B. K. Bose, Global Energy Scenario and Impact of Power Electronics in 21st Century, IEEE Transactions on Industrial Electronics, vol.60, issue.7, pp.2638-2651, 2013.

J. P. Ciferno, T. E. Fout, A. P. Jones, and J. T. Murphy, Capturing carbon from existing coal-fired power plants, Chemical Engineering Progress, vol.105, issue.4, pp.33-41, 2009.

, European Commission, Roadmap 2050, pp.1-9, 2012.

B. K. Bose, Power Electronics, Smart Grid, and Renewable Energy Systems, Proceedings of the IEEE, vol.105, issue.11, 2011.

A. Ipakchi and F. Albuyeh, Grid of the future, IEEE Power and Energy Magazine, vol.7, issue.2, pp.52-62, 2009.

S. S. Williamson, A. K. Rathore, and F. Musavi, Industrial Electronics for Electric Transportation: Current State-of-the-Art and Future Challenges, IEEE Transactions on Industrial Electronics, vol.62, issue.5, pp.3021-3032, 2015.

S. S. Hosseini, A. Badri, and M. Parvania, The plug-in electric vehicles for power system applications: The vehicle to grid (V2G) concept, 2012 IEEE International Energy Conference and Exhibition, pp.1101-1106, 2012.

H. Turker, M. Hauck, A. Hably, and S. Bacha, A tool of Vehicle-to-Grid (V2G) concept for voltage plan control of residential electric grid areas with Plug-in Hybrid Electric Vehicles (PHEVs), IECON Proceedings (Industrial Electronics Conference), pp.2883-2888, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00799639

P. Steimer, Power electronics, a key technology for future more electrical energy systems, 2009 IEEE Energy Conversion Congress and Exposition, pp.1161-1165, 2009.

J. Popovi?-gerber, J. A. Oliver, N. Cordero, T. Harder, J. A. Cobos et al., Power Electronics Enabling Efficient Energy Usage: Energy Savings Potential and Technological Challenges, IEEE Transactions on Power Electronics, vol.27, issue.5, pp.2338-2353, 2012.

F. Blaabjerg, Y. Yang, and K. Ma, Power electronics -Key technology for renewable energy systems -Status and future, 2013 3rd International Conference on Electric Power and Energy Conversion Systems, pp.1-6, 2013.

H. Li, T. Baldwin, C. Luongo, and D. Zhang, A Multilevel Power Conditioning System for Superconductive Magnetic Energy Storage, IEEE Transactions on Appiled Superconductivity, vol.15, issue.2, pp.1943-1946, 2005.

B. Bose, Global Warming: Energy, Environmental Pollution, and the Impact of Power Electronics, IEEE Industrial Electronics Magazine, vol.4, issue.1, pp.6-17, 2010.

L. Tan, N. Zhu, and B. Wu, An Integrated Inductor for Eliminating Circulating Current of Parallel Three-Level DC-DC Converter-Based EV

, Fast Charger, IEEE Transactions on Industrial Electronics, vol.63, issue.3, pp.1362-1371, 2016.

M. Liserre, T. Sauter, and J. Y. Hung, Future energy systems: Inegrating renewable energy into the smart power grid through industrial electronics, IEEE Ind. Electron. Mag, vol.4, pp.18-37, 2010.

F. Blaabjerg, Z. Chen, and S. B. Kjaer, Power electronics as efficient interface in dispersed power generation systems, IEEE Transactions on Power Electronics, vol.19, issue.5, pp.1184-1194, 2004.

G. Lefevre, L. Rambaud, L. Foube, and S. Mollov, Low-cost designs for domestic photovoltaic applications, 15th European Conference on Power Electronics and Applications, 2013.

J. W. Kolar, U. Drofenik, J. Biela, M. L. Heldwein, H. Ertl et al., PWM Converter Power Density Barriers, vol.L, pp.9-29, 2007.

J. W. Kolar, J. Biela, S. Waffler, T. Friedli, and U. Badstuebner, Performance trends and limitations of power electronic systems, 6th International Conference on Integrated Power Electronics Systems, pp.1-20, 2010.

C. Buttay, C. Martin, F. Morel, R. Caillaud, J. L. Leslé et al., Application of the PCB-Embedding Technology in Power Electronics -State of the Art and Proposed Development, Internal Symposiumon 3D Power Electronics Integration and Manufacturing (3DPEIM)
URL : https://hal.archives-ouvertes.fr/hal-01844981

C. J. Wu, F. C. Lee, S. Balachandran, and H. L. Goin, Design optimization for a half-bridge DC-DC converter, 1980 IEEE Power Electronics Specialists Conference, pp.57-67, 1980.

J. Kolar, J. Biela, and J. Minibock, Exploring the pareto front of multi-objective single-phase PFC rectifier design optimization -99.2% efficiency vs. 7kW/din3 power density, 2009 IEEE 6th International ? Bibliography Power Electronics and Motion Control Conference, pp.1-21, 2009.

J. H. Holland, Adaptation in Natural and Artificial Systems: An Introductory Analysis with application to biology, Control and artificial intelligence, 1975.

S. Busquets-monge, G. Soremekun, E. Hertz, C. Crebier, S. Ragon et al., Power converter design optimization, IEEE Industry Applications Magazine, vol.10, issue.1, pp.32-39, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00181585

H. Helali, D. Bergogne, J. Slama, H. Morel, P. Bevilacqua et al., Power converter's optimisation and design. Discrete cost function with genetic based algorithms, 2005 European Conference on Power Electronics and Applications, 2005.

F. Wang, W. Shen, D. Boroyevich, S. Ragon, V. Stefanovic et al., Design Optimization of Industrial Motor Drive Power Stage Using Genetic Algorithms, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting, vol.5, pp.2581-2586, 2006.

H. Peng-ren and T. Zheng, Optimization Design of Power Factor Correction Converter Based on Genetic Algorithm, 2010 Fourth International Conference on Genetic and Evolutionary Computing, pp.293-296, 2010.

P. Friedrichs, J. Millàn, T. Harder, N. Kamninski, A. Lindemann et al., Next Generation Power Electronics based on Wide Bandgap Devices -Challenges and Opportunities for Europe ECPE Position Paper Next Generation Power Electronics based on Wide Bandgap Devices -Challenges and Opportunities for Europe, pp.1-17, 2016.

A. Ostmann, C. Boehme, K. Schrank, K. Lang, and F. Izm, Development of a Microcamera with Embedded Image Processor Using Panel Level Packaging, European Microelectronics Packaging Conference (EMPC), pp.1-4, 2015.

R. Caillaud, Integration of a 3.3kW bidirectional AC/DC converter using PCB embedded technology, 2019.
URL : https://hal.archives-ouvertes.fr/tel-02077921

M. Kasper, D. Bortis, G. Deboy, and J. W. Kolar, Design of a Highly Efficient (97.7%) and Very Compact (2.2 kW/dm $?3$) Isolated AC-DC Telecom Power Supply Module Based on the Multicell ISOP Converter Approach, IEEE Transactions on Power Electronics, vol.32, issue.10, pp.7750-7769, 2017.

N. Degrenne, G. Lefevre, and M. Stefan, A 2W, 5MHz, PCB-integration compatible 2.64cm$?3$ regulated and isolated power supply for gate driver, 2016 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe, pp.1-10, 2016.

M. Kasper, D. Bortis, J. W. Kolar, and G. Deboy, Hyper-efficient (98%) and super-compact (3.3kW/dm3) isolated AC/DC telecom power supply module based on multi-cell converter approach, 2014 IEEE Energy Conversion Congress and Exposition (ECCE), pp.150-157, 2014.

D. Dujic, F. Kieferndorf, F. Canales, and U. Drofenik, Power electronic traction transformer technology, Conference Proceedings -2012 IEEE 7th International Power Electronics and Motion Control Conference -ECCE Asia, vol.2012, pp.636-642, 2012.

D. Bortis, D. Neumayr, and J. W. Kolar, ??-Pareto optimization and comparative evaluation of inverter concepts considered for the GOOGLE Little Box Challenge, 2016 IEEE 17th Workshop on Control and Modeling for Power Electronics (COMPEL), no. Compel. IEEE, pp.1-5, 2016.

S. Ji, D. Reusch, F. C. Lee-;-h, M. D. Mantooth, P. Glover et al., High-frequency high power density 3-D integrated gallium-nitride-based point of load module design, IEEE Journal of Emerging and Selected Topics in Power Electronics, vol.28, issue.9, p.1, 2013.

X. Ding, M. Du, T. Zhou, H. Guo, and C. Zhang, Comprehensive comparison between silicon carbide MOSFETs and silicon IGBTs based traction systems for electric vehicles, Applied Energy, 2016.

A. Alderman, L. L. Burgyan, B. Narveson, and E. Parker, 3-D Embedded Packaging Technology: Analyzing its needs and challenges, IEEE Power Electronics Magazine, vol.2, issue.4, pp.30-39, 2015.

C. Inc, CAS120M12BM2 1.2kV, 13 m All-Silicon Carbide Half-Bridge Module

E. Hoene, A. Ostmann, B. T. Lai, C. Marczok, A. Müsing et al., Ultra-low-inductance power module for fast switching semiconductors, PCIM Europe Conference Proceedings, pp.198-205, 2013.

J. Schanen and P. Jeannin, Integration solutions for clean and safe switching of high speed devices Introduction : consequences of high speed switching, 10th International Conference on Integrated Power Electronics Systems, pp.1-11, 2018.

E. Hoene, A. Ostmann, and C. Marczok, Packaging Very Fast Switching Semiconductors, 8th International Conference on Integrated Power Electronics Systems (CIPS), pp.502-508, 2014.

G. Feix, E. Hoene, O. Zeiter, and K. Pedersen, International Exhibition and Conference for Power Electronics, Intelligent Motion, Proceedings of PCIM Europe, pp.1-7, 2015.

M. Ooida, F. Taniguchi, T. Iwasaki, A. Ono, Y. Asano et al., Advanced packaging technologies supporting new semiconductor application, 2016 IEEE CPMT Symposium Japan, pp.125-128, 2016.

G. Regnat, P. Jeannin, J. Ewsanchuk, D. Frey, S. Mollov et al., Packaging 3D pour MOSFET en carbure de silicium, Symposium de Génie Electrique (SGE), 2016.
URL : https://hal.archives-ouvertes.fr/hal-01361591

G. Regnat, P. O. Jeannin, G. Lefevre, J. Ewanchuk, D. Frey et al., Silicon carbide power chip on chip module based on embedded die technology with paralleled dies, pp.4913-4919, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01212763

H. Kim, B. K. Sun, and J. Kim, Suppression of GHz Range Power/Ground Inductive Impedance and Simultaneous Switching Noise Using Embedded Film Capacitors in Multilayer Packages and PCBs, IEEE Microwave and Wireless Components Letters, vol.14, issue.2, pp.71-73, 2004.

Y. Su, Q. Li, and F. C. Lee, Design and evaluation of a high-frequency LTCC inductor substrate for a three-dimensional integrated DC/DC converter, IEEE Transactions on Power Electronics, vol.28, issue.9, pp.4354-4364, 2013.

R. Perrin, B. Allard, C. Buttay, N. Quentin, W. Zhang et al., 2 MHz high-density integrated power supply for gate driver in high-temperature applications, p.2016
URL : https://hal.archives-ouvertes.fr/hal-01372141

, IEEE Applied Power Electronics Conference and Exposition, pp.524-528, 2016.

B. Sun, R. Burgos, and D. Boroyevich, Ultra-low Input-Output Capacitance PCB-Embedded Dual-Output Gate-Drive Power Supply for 650 V GaN-Based Half-Bridges, IEEE Transactions on Power Electronics, pp.1-1, 2018.

M. Power-solutions, MGJ1 Series 5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters

M. Ali, E. Labouré, F. Costa, and B. Revol, Design of a Hybrid Integrated EMC Filter for a DC-DC Power Converter, IEEE Transactions on Power Electronics, vol.27, issue.11, pp.4380-4390, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00779082

G. Lefevre, J. Ewanchuk, N. Degrenne, and Y. Lefevre, CIPS, 2016.

, 9th International Conference on Integrated Power Electronics Systems, pp.1-8, 2016.

Y. Lei, C. Barth, S. Qin, W. C. Liu, I. Moon et al., A 2-kW Single-Phase Seven-Level Flying Capacitor Multilevel Inverter with an Active Energy Buffer, IEEE Transactions on Power Electronics, vol.32, issue.11, pp.8570-8581, 2017.

F. Frebel, P. Bleus, O. Bomboir, and D. Rixhon, Transformer-less 2 kW non isolated 400 VDC/230 VAC single stage micro inverter, 2016 IEEE International Telecommunications Energy Conference (INTELEC), pp.1-6, 2016.

W. H. Bataresh and I. , Basic Converter Topologies For Power Factor Correction, IEEE Southeartcon Proceedings, pp.348-353, 1998.

J. P. Figueiredo, F. L. Tofoli, and B. L. Silva, A review of single-phase PFC topologies based on the boost converter, p.9, 2010.

, IEEE/IAS International Conference on Industry Applications, INDUSCON 2010, 2010.

L. R. Chen, S. L. Wu, D. T. Shieh, and T. R. Chen, Sinusoidal-ripple-current charging strategy and optimal charging frequency study for Li-ion batteries, IEEE Transactions on Industrial Electronics, vol.60, issue.1, pp.88-97, 2013.

J. Everts, Modeling and Optimization of Bidirectional Dual Active Bridge AC-DC Converter Topologies, 2014.

H. Wang and F. Blaabjerg, Reliability of capacitors for DC-link applications in power electronic converters-an overview, IEEE Transactions on Industry Applications, vol.50, issue.5, pp.3569-3578, 2014.

Z. Qin, Y. Tang, P. C. Loh, and F. Blaabjerg, Benchmark of AC and DC active power decoupling circuits for second-order harmonic mitigation in kW-scale single-phase inverters, ECCE, vol.4, issue.1, pp.2514-2521, 2015.

M. Vitorino, L. Alves, R. Wang, and M. Correa, Low-Frequency Power Decoupling in Single-Phase Applications: A Comprehensive Overview, IEEE Transactions on Power Electronics, issue.99, p.1, 2016.

Y. Sun, Y. Liu, M. Su, W. Xiong, and J. Yang, Review of Active Power Decoupling Topologies in Single-Phase Systems, IEEE Transactions on Power Electronics, vol.31, issue.7, pp.1-1, 2015.

J. I. Itoh, T. Sakuraba, K. Kusaka, H. Watanabe, and K. Furukawa, Comparison of circuit topologies for active power decoupling toward high power density, 2016 IEEE 8th International Power Electronics and Motion Control Conference, pp.421-428, 2016.

K. Tsuno, T. Shimizu, K. Wada, and K. Ishii, Optimization of the DC ripple energy compensating circuit on a single-phase voltage source PWM rectifier, 2004 IEEE 35th Annual Power Electronics Specialists Conference, pp.316-321

S. Li, W. Qi, S. Tan, and S. Hui, Integration of an active-filter and a single-phase ac/dc converter with reduced capacitance requirement and component count, IEEE Transactions on Power Electronics, issue.99, pp.1-1, 2015.

H. Wang, H. S. Chung, and W. Liu, Use of a series voltage compensator for reduction of the dc-link capacitance in a capacitor-supported system, IEEE Transactions on Power Electronics, vol.29, issue.3, pp.1163-1175, 2014.

S. Qin, Y. Lei, C. Barth, W. C. Liu, and R. C. Pilawa-podgurski, A high-efficiency high energy density buffer architecture for power pulsation decoupling in grid-interfaced converters, pp.149-157, 2015.

D. Neumayr, D. Bortis, and J. W. Kolar, Ultra Compact Power Pulsation Buffer for Single-Phase Converter Systems, ECCE Asia, pp.1-10, 2016.

H. Watanabe, K. Koiwa, J. Itoh, Y. Ohnuma, and S. Miyawaki, Miniaturization of the boost-up type active buffer circuit in a single-phase inverter, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 -ECCE ASIA), pp.84-91, 2014.

Y. Tang, F. Blaabjerg, P. C. Loh, C. Jin, and P. Wang, Decoupling of fluctuating power in single-phase systems through a symmetrical half-bridge circuit, IEEE Transactions on Power Electronics, vol.30, issue.4, pp.1855-1865, 2015.

T. Loher, S. Karaszkiewicz, L. Bottcher, and A. Ostmann, Compact power electronic modules realized by PCB embedding technology, 2016 IEEE CPMT Symposium Japan, pp.259-262, 2016.

J. Crebier, L. Jourdan, R. Popescu, and J. Ferrieux, Common mode disturbance reduction of PFC full bridge rectifiers, IEEE 31st, 2000.

, Annual Power Electronics Specialists Conference. Conference Proceedings (Cat. No.00CH37018), vol.2, pp.922-927, 2000.

C. Marxgut, F. Krismer, D. Bortis, and J. W. Kolar, Ultraflat interleaved triangular current mode (TCM) single-phase PFC rectifier, IEEE Transactions on Power Electronics, vol.29, issue.2, pp.873-882, 2014.

O. Knecht, D. Bortis, and J. W. Kolar, Comparative evaluation of a Triangular Current Mode (TCM) and Clamp-Switch TCM DC-DC boost converter, 2016 IEEE Energy Conversion Congress and Exposition (ECCE), pp.1-8, 2016.

S. Yin, Y. Liu, Y. Liu, K. J. Tseng, J. Pou et al., Comparison of SiC Voltage Source Inverters Using Synchronous Rectification and Freewheeling Diode, IEEE Transactions on Industrial Electronics, vol.65, issue.2, pp.1051-1061, 2017.

R. Caillaud, C. Buttay, R. Mrad, J. L. Leslé, F. Morel et al., Comparison of planar and Toroidal PCB integrated inductors for a multi-cellular 3.3 kW PFC, 2017 IEEE International Workshop On Integrated Power Packaging (IWIPP), pp.1-5, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01535721

J. Li, T. Abdallah, and C. R. Sullivan, Improved calculation of core loss with nonsinusoidal waveforms, Conference Record -IAS Annual Meeting, vol.4, pp.2203-2210, 2001.

M. L. Heldwein and J. W. Kolar, Design of Minimum Volume EMC Input Filters for an Ultra Compact Three-Phase PWM Rectifier, 9th Brazilian Power Electronics Conference, 2007.

R. Erickson, APEC '99. Fourteenth Annual Applied Power Electronics Conference and Exposition, Conference Proceedings (Cat. No.99CH36285), vol.2, pp.1073-1079, 1999.

P. Dunand, Ecole d'électronique CNRS-IN2P3 CEM des cartes rapides / Lignes de transmission

B. H. Ko, S. G. Jeong, Y. G. Ahn, K. S. Park, N. C. Park et al., Analysis of the correlation between acoustic noise and vibration generated by a multi-layer ceramic capacitor, Microsystem Technologies, vol.20, pp.1671-1677, 2014.

. Tdk, CeraLink datasheet, 2017.

D. Neumayr, D. Bortis, J. W. Kolar, M. Koini, and J. Konrad, Comprehensive large-signal performance analysis of ceramic capacitors for power pulsation buffers, 2016 IEEE 17th Workshop on Control and Modeling for Power Electronics, 2016.