F. Avion-du, Aerospace Valley, p.7, 2016.

C. E. Granta-design and . Selector,

. Airbus, «A, vol.350, 2014.

, FAR 25.853-1 Flammability requirements for aircraft seat cushions, AIRCRAFT CERTIFICATION DIVISION, 1986.

J. Civil, E. Normale, and . De-cachan, Contribution à la modélisation de l'absorption d'énergie dans les composites stratifiés par fragmentation et délaminage sous sollicitations dynamiques, 2009.

, Hexcel, p.26, 2014.

L. Yan and N. Chouw, Crashworthiness characteristics of flax fibre reinforced epoxy tubes for energy absorption application, Mater. Des, vol.51, pp.629-640, 2013.

T. Niezgoda and W. Barnat, Analysis of protective structures made of various composite materials subjected to impact, Mater. Sci. Eng. A, pp.705-707, 2008.

P. H. Thornton and R. ,

. Jeryan, CRASH ENERGY MANAGEMENT IN COMPOSITE AUTOMOTIVE STRUCTURES, Int. J. Impact Eng, vol.7, issue.2, pp.167-180, 1988.

C. Bisagni, G. D. Pietro, L. Fraschini, and D. Terletti, Progressive crushing of fiber-reinforced composite structural components of a Formula One racing car, Compos. Struct, vol.68, issue.4, pp.491-503, 2005.

P. Qiao, M. Yang, and F. Bobaru, Impact Mechanics and High-Energy Absorbing Materials: Review, J. Aerosp. Eng, vol.21, issue.4, pp.235-248, 2008.

A. Kolopp, Impact sur structures sandwiches pour application de blindage aéronautique, 2012.

G. D. Caserta, L. Iannucci, and U. Galvanetto, Shock absorption performance of a motorbike helmet with honeycomb reinforced liner, Compos. Struct, vol.93, issue.11, pp.2748-2759, 2011.

D. Systèmes, Abaqus 6.13 Online Documentation, 2013.

W. J. Cantwell and J. Morton, The impact resistance of composite materials -a review, Composites, vol.22, issue.5, 1991.

R. Olsson, Mass criterion for wave controlled impact response of composite plates, Compos. Part Appl. Sci. Manuf, vol.31, issue.8, pp.879-887, 2000.

C. Priem, R. Othman, P. Rozycki, and D. Guillon, Experimental investigation of the crash energy absorption of 2.5D-braided thermoplastic composite tubes, Compos. Struct, vol.116, pp.814-826, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01240159

G. A. Davies, Impact damage prediction in carbon composite structures, J. Impact Eng, vol.16, issue.1, pp.149-170, 1995.

G. Belingardi and R. Vadori, Low velocity impact tests of laminate glass-fiber-epoxy matrix composite material plates, Int. J. Impact Eng, vol.27, issue.2, pp.213-229, 2002.

L. Guillaumat, Reliability of composite structures-impact loading, Comput. Struct, vol.76, issue.1, pp.163-172, 2000.

M. Akta?, C. Atas, B. M. ?çten, and R. Karakuzu, An experimental investigation of the impact response of composite laminates, Compos. Struct, vol.87, issue.4, pp.307-313, 2009.

C. Evci and M. Gülgeç, An experimental investigation on the impact response of composite materials, Int. J. Impact Eng, vol.43, pp.40-51, 2012.

E. Trousset, Prévision des dommages d'impact basse vitesse et basse énergie dans les composites à matrice organique stratifiés, Arts et Métiers ParisTech, 2013.

G. Farley, The Effects of Crushing Speed on the Energy-Absorption Capability of Composite Material, vol.25, pp.1314-1329, 1991.

A. Marouene, Comportement sous choc des composites sandwichs et influence des paramètres des matériaux et du test, 2010.

R. Robinson and G. A. ,

. Davies, Impactor mass and specimen geometry effects in low velocity impact of laminated composites, Int. J. Impact Eng, vol.12, issue.2, pp.189-207, 1992.

E. , Impact loading in laminated composites, 2008.

S. Abrate, Impact engineering of composite structures, vol.526, 2011.

J. S. Tomblin, K. S. Raju, J. F. Acosta, B. L. Smith, and N. A. Romine, Impact damage characterization and damage tolerance of composite sandwich airframe structures-Phase II, 2002.

M. O. Richardson and M. ,

. Wisheart, Review of low-velocity Impact properties of composites materials, Composites, vol.27, pp.1123-1131, 1996.

D. Gay, S. V. Hoa, and S. W. Tsai, Composite materials: design and applications, 2003.

F. Lachaud, C. Espinosa, and L. Michel, Prévision de l'endommagement de composites stratifiés carbone-époxy sous chargement de type impact, Comptes-Rendus 17èmes Journ. Natl. Sur Compos. JNC17, 2011.

S. Abrate, Impact on Composite Structures, 2005.

S. Long, X. Yao, and X. Zhang, Delamination prediction in composite laminates under lowvelocity impact, Compos. Struct, vol.132, pp.290-298, 2015.

M. Quaresimin, M. Ricotta, L. Martello, and S. Mian, Energy absorption in composite laminates under impact loading, Compos. Part B Eng, vol.44, issue.1, pp.133-140, 2013.

R. Pinzelli, Fibres aramides pour matériaux composites, Techniques de l'ingénieur, vol.1, p.11, 1978.

T. Uth and V. S. Deshpande, Response of clamped sandwich beams subjected to high-velocity impact by sand slugs, Int. J. Impact Eng, vol.69, pp.165-181, 2014.

S. Zhu and G. B. Chai, Damage and failure mode maps of composite sandwich panel subjected to quasi-static indentation and low velocity impact, Compos. Struct, vol.101, pp.204-214, 2013.

D. A. Bailey, The effect of damage on the energy absorption potential of composite structures, 2005.

W. Chen and T. Wierzbicki, Relative merits of single-cell, multi-cell and foam-filled thin-walled structures in energy absorption, Thin-Walled Struct, vol.39, issue.4, pp.287-306, 2001.

A. Ahmed-ali, R. Baleh, D. Razafindramary, and L. Abdul-latif, ANALYSIS OF THE STIFFNESS CONTRAST OF A MECHANICAL STRUCTURE MADE OF COMPOSITE MATERIALS, pp.188-196, 2015.

Y. Aminanda, &. Contribution-À-l'analyse, . Et, . La, . De et al., , 2004.

S. Marguet, Contribution à la modélisation du comportement mécanique des structures sandwichs soumises à l'impact, 2007.

B. Hou, A. Ono, S. Abdennadher, S. Pattofatto, Y. L. Li et al., Impact behavior of honeycombs under combined shear-compression. Part I: Experiments, Int. J. Solids Struct, vol.48, issue.5, pp.687-697, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00580832

R. Tounsi, E. Markiewicz, G. Haugou, F. Chaari, and B. Zouari, Dynamic behaviour of honeycombs under mixed shear-compression loading: Experiments and analysis of combined effects of loading angle and cells in-plane orientation, Int. J. Solids Struct, vol.80, pp.501-511, 2016.

T. Anderson and E. Madenci, Experimental investigation of low-velocity impact characteristics of sandwich composites, Compos. Struct, vol.50, issue.3, pp.239-247, 2000.

R. A. Mines, C. M. Worrall, and A. G. Gibson, The static and impact behaviour of polymer composite sandwich beams, Composites, vol.25, issue.2, pp.95-110, 1994.

A. Chettah, C. Bouvet, and J. ,

L. Ferrero, P. Ballere, A. Peres, and . Bergerot, A three-dimensional modelling of damage and failure of IM7/PEEK composite in low velocity impact, 2014.

F. Abbas, Aeronautical Applications of Non-destructive Testing, 2013.

T. R. Hay, L. Wei, J. L. Rose, and T. Hayashi, Rapid inspection of composite skin-honeycomb core structures with ultrasonic guided waves, J. Compos. Mater, vol.37, issue.10, pp.929-939, 2003.

V. Carmona, Étude de l'endommagement de matériaux composites par tomographie X et émission acoustique, 2009.

Y. Ledru, Etude de la porosité dans les matériaux composites stratifiés aéronautiques, 2009.

S. Youssef, Etude par tomographie X et modélisation par éléments finis du comportement mécanique des mousses solides, L'Institut National des Sciences Appliquées de Lyon, 2004.

F. Clément, Approche multi-échelle pour la prédiction de la tenue d'une aile caisson dédiée à l'aviation légère : expérimentation et simulation, ENSMA, 2016.

Z. Hashin, Failure criteria for unidirectional fiber composites, J. Appl. Mech, vol.47, issue.2, pp.329-334, 1980.

J. Zhang and X. Zhang, An efficient approach for predicting low-velocity impact force and damage in composite laminates, Compos. Struct, vol.130, pp.85-94, 2015.

A. Puck and H. Schürmann, FAILURE ANALYSIS OF FRP LAMINATES BY MEANS OF PHYSICALLY BASED PHENOMENOLOGICAL MODELS*, Compos. Sci. Technol, vol.58, pp.1045-1067, 1998.

Y. Shi, T. Swait, and C. Soutis, Modelling damage evolution in composite laminates subjected to low velocity impact, Compos. Struct, vol.94, issue.9, pp.2902-2913, 2012.

S. Samborski, Numerical analysis of the DCB test configuration applicability to mechanically coupled Fiber Reinforced Laminated Composite beams, Compos. Struct, vol.152, pp.477-487, 2016.

A. Turon, C. G. Dávila, P. P. Camanho, and J. Costa, An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models, Eng. Fract. Mech, vol.74, issue.10, pp.1665-1682, 2007.

J. Zhang and X. Zhang, Simulating low-velocity impact induced delamination in composites by a quasi-static load model with surface-based cohesive contact, Compos. Struct, vol.125, pp.51-57, 2015.

O. T. Topac, B. Gozluklu, E. Gurses, and D. Coker, Experimental and computational study of the damage process in CFRP composite beams under low-velocity impact, Compos. Part Appl. Sci. Manuf, 2016.

R. Roy, S. Park, J. Kweon, and J. Choi, Characterization of Nomex honeycomb core constituent material mechanical properties, Compos. Struct, vol.117, pp.255-266, 2014.

T. Lin, M. Yang, and J. Huang, Effects of solid distribution on the out-of-plane elastic properties of hexagonal honeycombs, Compos. Struct, vol.100, pp.436-442, 2013.

C. Chuang and J. Huang, Theoretical expressions for describing the stiffness and strength of regular hexagonal honeycombs with Plateau borders, Mater. Des, vol.24, issue.4, pp.263-272, 2003.

M. Yang and J. Huang, Numerical analysis of the stiffness and strength of regular hexagonal honeycombs with plateau borders, Compos. Struct, vol.64, issue.1, pp.107-114, 2004.

C. Chuang and J. Huang, Elastic moduli and plastic collapse strength of hexagonal honeycombs with plateau borders, Int. J. Mech. Sci, vol.44, issue.9, pp.1827-1844, 2002.

M. Yang and J. Huang, Elastic buckling of regular hexagonal honeycombs with plateau borders under biaxial compression, Compos. Struct, vol.71, issue.2, pp.229-237, 2005.

L. Aktay, A. F. Johnson, and B. Kröplin, Numerical modelling of honeycomb core crush behaviour, Eng. Fract. Mech, vol.75, issue.9, pp.2616-2630, 2008.

Y. Aminanda, B. Castanié, P. Thevenet, and J. J. Barrau, Tolérance aux dommages des structures sandwichs: simulation du comportement à l'impact et après endommagement

B. Castanié, Y. Aminanda, C. Bouvet, and J. Barrau, Core crush criterion to determine the strength of sandwich composite structures subjected to compression after impact, Compos. Struct, vol.86, issue.1-3, pp.243-250, 2008.

B. Castanié, C. Bouvet, Y. Aminanda, J. Barrau, and P. Thevenet, Modelling of low-energy/lowvelocity impact on Nomex honeycomb sandwich structures with metallic skins, Int. J. Impact Eng, vol.35, issue.7, pp.620-634, 2008.

P. Rahmé, C. Bouvet, S. Rivallant, V. Fascio, and G. Valembois, Experimental investigation of impact on composite laminates with protective layers, Compos. Sci. Technol, vol.72, issue.2, pp.182-189, 2012.

H. B. Zeng, S. Pattofatto, H. Zhao, Y. Girard, and V. Fascio, Perforation of sandwich plates with graded hollow sphere cores under impact loading, Int. J. Impact Eng, vol.37, issue.11, pp.1083-1091, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00723005

N. Gardner, E. Wang, and A. Shukla, Performance of functionally graded sandwich composite beams under shock wave loading, Compos. Struct, vol.94, issue.5, pp.1755-1770, 2012.

T. George, V. S. Deshpande, and H. N. Wadley, Hybrid carbon fiber composite lattice truss structures, Compos. Part Appl. Sci. Manuf, vol.65, pp.135-147, 2014.

G. Xu, J. Zhai, T. Zeng, Z. Wang, S. Cheng et al., Response of composite sandwich beams with graded lattice core, Compos. Struct, vol.119, pp.666-676, 2015.

J. Xiong, L. Ma, L. Wu, B. Wang, and A. Vaziri, Fabrication and crushing behavior of low density carbon fiber composite pyramidal truss structures, Compos. Struct, vol.92, issue.11, pp.2695-2702, 2010.

S. Yin, L. Wu, L. Ma, and S. Nutt, Pyramidal lattice sandwich structures with hollow composite trusses, Compos. Struct, vol.93, issue.12, pp.3104-3111, 2011.

T. J. Singh and S. Samanta, Characterization of Kevlar Fiber and Its Composites: A Review, Mater. Today Proc, vol.2, issue.4-5, pp.1381-1387, 2015.

, Tiger EC665

H. Ville, Matériaux composites fibres naturelles/polymère biodégradables ou non

B. Masseteau, Etude de solutions composites bio-sourcées respectueuses de l'environnement pour des applications dans le domaine de l'aviation légère, 2012.

F. Sarasini, Effect of basalt fiber hybridization on the impact behavior under low impact velocity of glass/basalt woven fabric/epoxy resin composites, Compos. Part Appl. Sci. Manuf, vol.47, pp.109-123, 2013.

, Vente en ligne résine époxy et matériaux composites | Boutique SICOMIN -Sicomin

, Basaltex -The thread of stone, p.25, 2016.

F. Sarasini, Hybrid composites based on aramid and basalt woven fabrics: Impact damage modes and residual flexural properties, Mater. Des, vol.49, pp.290-302, 2013.

R. Petrucci, C. Santulli, D. Puglia, F. Sarasini, L. Torre et al., Mechanical characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion, Mater. Des, vol.49, pp.728-735, 2013.

A. Lystrup and T. L. Andersen, Autoclave consolidation of fibre composites with a high temperature thermoplastic matrix, J. Mater. Process. Technol, vol.77, pp.80-85, 1998.

W. Tan and B. G. Falzon, Modelling the nonlinear behaviour and fracture process of AS4/PEKK thermoplastic composite under shear loading, Compos. Sci. Technol, vol.126, pp.60-77, 2016.

I. Giraud, Elaboration d'ensimages thermoplastiques thermostables: influence sur le comportement mécanique des composites PEEK/fibres de carbone, 2011.

B. M. Walther, An Investigation of the Tensile Strength and Stiffness of Unidirectional PolymerMatrix, Carbon-Fiber Composites under the Influence of Elevated Temperatures, 1998.

J. Aucher, Etude comparative du comportement composites à matrice thermoplastique ou thermodurcissable, 2009.
URL : https://hal.archives-ouvertes.fr/tel-00557897

J. Suhr, N. Koratkar, P. Keblinski, and P. Ajayan, Viscoelasticity in carbon nanotube composites, Nat. Mater, vol.4, issue.2, pp.134-137, 2005.

C. Devalve and R. Pitchumani, Experimental investigation of the damping enhancement in fiberreinforced composites with carbon nanotubes, Carbon, vol.63, pp.71-83, 2013.

T. Subhani, M. Latif, I. Ahmad, S. A. Rakha, N. Ali et al., Mechanical performance of epoxy matrix hybrid nanocomposites containing carbon nanotubes and nanodiamonds, Mater. Des, vol.87, pp.436-444, 2015.

F. Silva, J. Njuguna, S. Sachse, K. Pielichowski, A. Leszczynska et al., The influence of multiscale fillers reinforcement into impact resistance and energy absorption properties of polyamide 6 and polypropylene nanocomposite structures, Mater. Des, vol.50, pp.244-252, 2013.

L. Scodellaro, Endommagement par cavitation du polypropylène renforcé au choc par des particules d'élastomère, 2001.

, Composites: Higher Properties, Lower Cost : Plastics Technology, p.7, 2016.

P. Vachon and ;. , , 2012.

J. Gustin, A. Joneson, M. Mahinfalah, and J. Stone, Low velocity impact of combination Kevlar/carbon fiber sandwich composites, Compos. Struct, vol.69, issue.4, pp.396-406, 2005.

O. S. David-west, N. V. Alexander, D. H. Nash, and W. M. Banks, Energy absorption and bending stiffness in CFRP laminates: The effect of 45° plies, Thin-Walled Struct, vol.46, issue.7-9, pp.860-869, 2008.

B. Gentilleau, Modélisation et validation expérimentale du comportement thermomécanique de multicouches polymère-composite bobine. Application au Stockage d'hydrogène hyperbare, 2012.

J. H. Greenwood and P. G. Rose, Compressive behaviour of Kevlar 49 fibres and composites, J. Mater. Sci, vol.9, issue.11, pp.1809-1814, 1974.

M. Davidovitz, A. Mittelman, I. Roman, and G. Marom, Failure modes and fracture mechanisms in flexure of Kevlar-epoxy composites, J. Mater. Sci, vol.19, issue.2, pp.377-384, 1984.

J. Grandidier and &. Longues, , 1991.

J. Grandidier and P. Casari, Critère de rupture en compression dans le sens des fibres du pli unidirectionnel intégrant l'effet de structure, Comptes Rendus JNC, vol.16, 2009.

P. Mechin, V. Keryvin, J. Grandidier, and D. Glehen, Influence of the Epoxy matrix plasticity on the compressive strength of 0°plies in carbon fibers composites, pp.602-611, 2017.

S. Kelsey, R. A. Gellatly, and B. W. Clark, The shear modulus of foil honeycomb cores: A theoretical and experimental investigation on cores used in sandwich construction, Aircr. Eng. Aerosp. Technol, vol.30, issue.10, pp.294-302, 1958.

M. Grédiac and L. Dufort, Experimental evidence of parasitic effects in the shear test on sandwich beams, Exp. Mech, vol.42, issue.2, pp.186-193, 2002.

A. Petras and M. P. ,

. Sutcliffe, Indentation failure analysis of sandwich beams, Compos. Struct, vol.50, pp.311-318, 2000.

Z. Zhou, Z. Wang, L. Zhao, and X. Shu, Experimental investigation on the yield behavior of Nomex honeycombs under combined shear-compression, Lat. Am. J. Solids Struct, vol.9, issue.4, pp.515-530, 2012.

S. Pimenta, R. Gutkin, S. T. Pinho, and P. Robinson, A micromechanical model for kink-band formation: Part I -Experimental study and numerical modelling, Compos. Sci. Technol, vol.69, issue.7-8, pp.948-955, 2009.

S. Pimenta, R. Gutkin, S. T. Pinho, and P. Robinson, A micromechanical model for kink-band formation: Part II-Analytical modelling, Compos. Sci. Technol, vol.69, issue.7-8, pp.956-964, 2009.

C. Cerbu, Mechanical Characterization of the Flax/Epoxy Composite Material, Procedia Technol, vol.19, pp.268-275, 2015.

P. Ouague, Mise en forme de composites à base de fibres végétales, 2015.

L. Longbiao, Modeling hysteresis behavior of cross-ply C/SiC ceramic matrix composites, Compos. Part B Eng, vol.53, pp.36-45, 2013.

L. Longbiao, Cyclic loading/unloading hysteresis behavior of fiber-reinforced ceramic-matrix composites at room and elevated temperatures, Mater. Sci. Eng. A, vol.648, pp.235-242, 2015.

K. Chung and H. Ryou, Development of viscoelastic/rate-sensitive-plastic constitutive law for fiber-reinforced composites and its applications. Part I: Theory and material characterization, Compos. Sci. Technol, vol.69, issue.2, pp.284-291, 2009.

H. Ryou and K. Chung, Development of viscoelastic/rate-sensitive-plastic constitutive law for fiber-reinforced composites and its applications Part II: Numerical formulation and verification, Compos. Sci. Technol, vol.69, issue.2, pp.292-299, 2009.

C. Hochard and Y. Thollon, A generalized damage model for woven ply laminates under static and fatigue loading conditions, Int. J. Fatigue, vol.32, issue.1, pp.158-165, 2010.

M. Trovalet, P. Ladeveze, and G. Lubineau, Un modele micro pour le calcul des structures en composites stratifiés, améliorations et simulations= A micro model for analysis of laminated composites, improvement and illustrations, JNC 16, p.9, 2009.

F. Laurin, N. Carrère, and J. F. Maire, Approche hybride multiéchelle pour l'analyse de la tenue de structures composites sous sollicitations complexes 3D, 2009.

Z. Mahboob, I. E. Sawi, R. Zdero, Z. Fawaz, and H. Bougherara, Tensile and compressive damaged response in Flax fibre reinforced epoxy composites, Compos. Part Appl. Sci. Manuf, vol.92, pp.118-133, 2017.

S. R. Allen and E. J. Roche, Deformation behaviour of Kevlar® aramid fibres, Polymer, vol.30, issue.6, pp.996-1003, 1989.

J. A. Bencomo-cisneros, Characterization of Kevlar-29 fibers by tensile tests and nanoindentation, J. Alloys Compd, vol.536, pp.456-459, 2012.

K. Padmanabhan, On the elastic-plastic behaviour of woven fabric kevlar/epoxy composites, Int. J. Fract, vol.65, issue.3, pp.59-61, 1994.

L. Pil, F. Bensadoun, J. Pariset, and I. Verpoest, Why are designers fascinated by flax and hemp fibre composites?, Compos. Part Appl. Sci. Manuf, vol.83, pp.193-205, 2016.

M. Le-guen, R. H. Newman, A. Fernyhough, and M. P. Staiger, Tailoring the vibration damping behaviour of flax fibre-reinforced epoxy composite laminates via polyol additions, Compos. Part Appl. Sci. Manuf, vol.67, pp.37-43, 2014.

D. Zhu, B. Mobasher, J. Erni, S. Bansal, and S. D. Rajan, Strain rate and gage length effects on tensile behavior of Kevlar 49 single yarn, Compos. Part Appl. Sci. Manuf, vol.43, issue.11, pp.2021-2029, 2012.

M. Yazici, Loading rate sensitivity of high strength fibers and fiber/matrix interfaces, J. Reinf. Plast. Compos, vol.28, issue.15, pp.1869-1880, 2009.

Y. Haomiao, Non linear behavior of flax/epoxy unidirectional composite, 2016.

E. Ahci and R. Talreja, Characterization of viscoelasticity and damage in high temperature polymer matrix composites, Compos. Sci. Technol, vol.66, issue.14, pp.2506-2519, 2006.

B. Madsen, M. Aslan, and H. Lilholt, Fractographic observations of the microstructural characteristics of flax fibre composites, Compos. Sci. Technol, vol.123, pp.151-162, 2016.

A. Monti, A. E. Mahi, Z. Jendli, and L. Guillaumat, Mechanical behaviour and damage mechanisms analysis of a flax-fibre reinforced composite by acoustic emission, Compos. Part Appl. Sci. Manuf, vol.90, pp.100-110, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01792109

K. Padmanabhan and . Others, The looping behaviour of Kevlar fibres, Scr. Metall. Mater, vol.28, issue.3, pp.367-370, 1993.

T. J. Kang and C. Kim, Energy-absorption mechanisms in Kevlar multiaxial warp-knit fabric composites under impact loading, Compos. Sci. Technol, vol.60, pp.773-784, 2000.

C. Zweben, The flexural strength of aramid fiber composites, J. Compos. Mater, vol.12, issue.4, pp.422-430, 1978.

S. Fischer and G. Marom, The flexural behaviour of aramid fibre hybrid composite materials, Compos. Sci. Technol, vol.28, issue.4, pp.291-314, 1987.

M. G. Dobb and M. Ghane, Tensile and compressive moduli of fibres using a two-component beam system, J. Mater. Sci, vol.31, issue.17, pp.4445-4450, 1996.

S. L. Valença, S. Griza, V. G. De-oliveira, E. M. Sussuchi, and F. G. De-cunha, Evaluation of the mechanical behavior of epoxy composite reinforced with Kevlar plain fabric and glass/Kevlar hybrid fabric, Compos. Part B Eng, vol.70, pp.1-8, 2015.

N. Auffray, Comportement des matériaux cellulaires: élaboration, caractérisation et modélisation prédictive des propriétés, 2008.

J. Zhang and M. F. Ashby, The out-of-plane properties of honeycombs, Int. J. Mech. Sci, vol.34, issue.6, pp.475-489, 1992.

L. J. Gibson and M. Ashby, Cellular solids Structure and properties, 2 ème, 1997.

F. Aymerich, P. Marcialis, S. Meili, and P. Priolo, An instrumented drop-weight machine for low-velocity impact testing, WIT Trans. Built Environ, vol.25, 1970.

S. Abrate, Modeling of impacts on composite structures, Compos. Struct, vol.51, pp.129-138, 2001.

Y. Zhang, Y. Li, H. Ma, and T. Yu, Tensile and interfacial properties of unidirectional flax/glass fiber reinforced hybrid composites, Compos. Sci. Technol, vol.88, pp.172-177, 2013.

E. V. González, P. Maimí, P. P. Camanho, A. Turon, and J. A. Mayugo, Simulation of dropweight impact and compression after impact tests on composite laminates, Compos. Struct, vol.94, issue.11, pp.3364-3378, 2012.

L. Yang, Y. Yan, and N. Kuang, Experimental and numerical investigation of aramid fibre reinforced laminates subjected to low velocity impact, Polym. Test, vol.32, issue.7, pp.1163-1173, 2013.

F. Hamon, Modélisation du comportement mécanique en fissuration d'alliages aéronautiques, Ecole Nationale Supérieure de Mécanique et d'Aérotechnique, 2010.

G. Petrone, S. Rao, S. Rosa, B. R. Mace, F. Franco et al., Initial experimental investigations on natural fibre reinforced honeycomb core panels, Compos. Part B Eng, vol.55, pp.400-406, 2013.

M. Y. Zuhri, Z. W. Guan, and W. J. Cantwell, The mechanical properties of natural fibre based honeycomb core materials, Compos. Part B Eng, vol.58, pp.1-9, 2014.

:. Photo, D. Stelia, and . .. Group, Liste des figures FIGURE 1.1

]. .. De, L. .. De-l'assise, . Illustration-d'un-concept-innovant-d'assise, . De, . Pilote et al., 15 FIGURE 2.1 : TYPES DE REPONSES A UN IMPACT, vol.11

R. De-l'impacteur;-(b)-avec-perforation-;-reponse and C. Verre, , vol.5

R. Nomex, , vol.6

A. Vitesse and . Et-w, , vol.13

E. Sandwich-;-38, ]. .. Schema-presentant, L. Parois, A. Bord-de, D. Plateau et al., 31 FIGURE 2, vol.18