. .. Atomic, , vol.164, p.189

, Atomistic, vol.32, p.194

. Brass, , vol.204, p.206

.. .. Bridging, , vol.114, p.194

. .. Copper, , p.206, 0205.

. .. Cp, , vol.32, p.144

. .. Cpfem, , vol.114, p.117

. .. Density-functional-theory, , vol.32, p.168

, Dislocation dynamics, vol.36, p.154

.. .. Drawing-force, , p.194

. .. Eccentricity, , vol.12, p.206

.. .. Electronic-scale, , vol.32, p.172

.. .. Electronic-scale, , vol.104, p.108

. .. Embedded-atom-method,

. .. Finite-element-method, , vol.17, p.164

. .. Icme, , vol.30, p.206

M. , , p.194

.. .. Mesh,

.. .. Microscale,

. .. Micro-texture, 129 Modified embedded atom method, vol.52, p.189

. .. Petra-iii, , vol.204, p.206

.. .. Residual-strain, , vol.49, p.76

.. .. Residual-stresses, , vol.180, p.206

R. .. , , vol.167, p.169

. Steel, , vol.204, p.206

. .. Stress-spec, , vol.52, p.191

.. .. Structure-scale, , vol.11, p.39

. Synchrotron, , vol.183, p.185

.. .. Texture, , p.206, 0205.

.. .. Tilting, , vol.46, p.206

, Chapter 11 References

, Copper Tube Handbook: Industry Standard Guide for the Design and Installation of Copper Piping Systems, 2016.

M. S. Hashmi, Aspects of tube and pipe manufacturing processes: Meter to nanometer diameter, vol.179, pp.5-10, 2006.

F. Dohmann and C. Hartl, Tube hydroforming-research and practical application, Journal of Materials Processing Technology, vol.71, issue.1, pp.174-186, 1997.

J. R. Davis, Aluminum and Aluminum Alloys, 1993.

S. N. David-chua, B. J. Macdonald, and M. S. Hashmi, Finite element simulation of slotted tube (stent) with the presence of plaque and artery by balloon expansion, Journal of Materials Processing Technology, pp.1772-1779, 2004.

, Pipe and Tube Manufacturing Processes, Mechanics of offshore pipelines, S. Kyriakides and E, vol.1

. Corona, , pp.59-89, 2007.

B. S. Brensing, Steel Tube and Pipe Manufacturing Process

, Wrought Copper Materials," in Copper in the automotive industry

, In cooperation with ECI--European Copper Institute, pp.29-43, 2007.

E. Tenckhoff, Deformation mechanisms, texture, and anisotropy in zirconium and Zircaloy, 1988.

J. R. Davis and S. L. Semiatin, ASM Metals Handbook: Forming and Forging, 1989.

H. A. Youssef, H. El-hofy, and M. H. Ahmed, Manufacturing technology: Materials, processes, and equipment

H. Gummert and E. , Drawing: The production of wires, bars and tubes, 2006.

V. Boljanovic, Metal shaping processes: Casting and molding, particulate processing, deformation processes, and metal removal, 2010.

G. E. Dieter, H. A. Kuhn, and S. L. Semiatin, Handbook of Workability and Process Design: Drawing of Wire, Rod, and Tube. USA: American Society for Metals, 2003.

H. Tschaetsch, Metal Forming Practise: Processes -Machines -Tools, 2006.

N. ?andru and G. Camenschi, A mathematical model of the theory of tube drawing with floating plug, International Journal of Engineering Science, vol.26, issue.6, pp.569-585, 1988.

A. Geleji, Bildsame Formgebung der Metalle: Theorie, Experiment und Anwendung, 1967.

F. Anke and M. Vater, Einführung in die technische Verformungskunde: Mit 31 Tafeln. Düsseldorf: Verl. Stahleisen, 1974.

K. Grote and E. K. Antonsson, Springer handbook of mechanical engineering

, Credo Reference, 2014.

H. Lippmann, . Mahrenholtz, P. Oskar, and . Der-umformung-metallischer-werkstoffe, , 1967.

O. Hoffman and G. Sachs, Introduction to the theory of plasticity for engineers, 1953.

H. W. Swift, LXXXI. Stresses and strains in tube-drawing, Philosophical Magazine Series, vol.7, issue.308, pp.883-902, 1949.

R. Hill, A Theory of the Yielding and Plastic Flow of Anisotropic Metals, Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, vol.193, issue.1033, pp.281-297, 1948.

S. Elion and J. M. Alexander, An industrial investigation of a process for tube drawing, pp.682-695, 1961.

A. P. Green, Plane Strain Theories of Drawing, Proc Instn Mech Engr, issue.174, pp.847-864, 1960.

T. Z. Blazynski, Design of Tools for Deformation Processes, 1986.

W. Johnson and P. B. Mellor, Engineering plasticity, 1983.

G. G. Moore and J. F. Wallace, Theories and Experiments on Tube Sinking through Conical Dies, Proceedings of the Institution of Mechanical Engineers, vol.182, issue.1, pp.19-32, 1967.

B. Avitzur, Handbook of metal-forming processes, 1983.

K. Um and L. D. Nyung, An upper bound solution of tube drawing, Journal of Materials Processing Technology, vol.63, issue.1-3, pp.43-48, 1997.

E. M. Rubio, Analytical methods application to the study of tube drawing processes with fixed conical inner plug: Slab and Upper Bound Methods, Journal of Achievements in Materials and Manufacturing Engineering of Achievements in Materials and Manufacturing Engineering, vol.14, issue.1-2, pp.119-130, 2006.

E. M. Rubio, C. González, M. Marcos, and M. A. Sebastián, Energetic analysis of tube drawing processes with fixed plug by upper bound method, Journal of Materials Processing Technology, vol.177, issue.1-3, pp.175-178, 2006.

B. R. Kumar, A. K. Singh, S. Das, and D. K. Bhattacharya, Cold rolling texture in AISI 304 stainless steel, Materials Science and Engineering: A, vol.364, issue.1-2, pp.132-139, 2004.

M. Bauser, G. Sauer, K. Siegert, and A. F. Castle, Extrusion, 2006.

L. D. Pari, Numerical Modeling of Copper Tube Extrusion Process and Eccentricity Analysis, Journal of Manufacturing Science and Engineering, vol.134, 2012.

R. F. Bennett, N. L. Brouwer, and D. M. Stricker, System for determining tube eccentricity, p.529

A. Carradò, Development of Residual Stresses and Texture in Drawn Copper Tubes, Advanced Engineering Materials, pp.1-7, 2013.

H. A. Merki, S. Naegeli, and J. Daleo, Device for the ultrasound measuring of cylindrical test models, p.276

G. Sansoni, P. Bellandi, and F. Docchio, Design and development of a 3D system for the measurement of tube eccentricity, Meas. Sci. Technol, vol.22, issue.7, p.75302, 2011.

, Copper and copper alloys -Seamless, round tubes for general purposes, EN, vol.12449, 2012.

, Seamless steel tubes for oil-and water-hydraulic systems -Calculation rules for pipes and elbows for dynamic loads, vol.2413, pp.2011-2017, 2011.

, Aluminium and aluminium alloys -Extruded round, coiled tube for general applications -Specification, EN, vol.13957, 2008.

D. Lévesque, Thickness and grain size monitoring in seamless tube-making process using laser ultrasonics, NDT & E International, vol.39, issue.8, pp.622-626, 2006.

H. John, R. , S. Joseph, and A. , Patent US3167176 -Method of and apparatus for correcting tube eccentricity

S. N. Randall and H. Prieur, Tubular production in the cold pilger machine, Iron Steel Eng, pp.109-117, 1967.

G. Tetley, Variation of eccentricity during block drawing of tubes, J. Applied Metalworking, vol.1, issue.1, pp.80-83, 1978.

W. Xu, K. Wang, P. Wang, and J. Zhou, A newly developed plug in the drawing process for achieving the high accuracy of aluminum rectangular tube, Int J Adv Manuf Technol, vol.57, issue.1-4, pp.1-9, 2011.

P. Huml, R. Fogelholm, and A. Salwén, Optimization of Cold Rolling of Precision Tubes, CIRP Annals -Manufacturing Technology, vol.42, issue.1, pp.283-286, 1993.

H. Abe, T. Iwamoto, Y. Yamamoto, S. Nishida, and R. Komatsu, Dimensional accuracy of tubes in cold pilgering, Journal of Materials Processing Technology, vol.231, pp.277-287, 2016.

R. S. Matos, T. A. Laursen, J. V. Vargas, and A. Bejan, Threedimensional optimization of staggered finned circular and elliptic tubes in forced convection, International Journal of Thermal Sciences, vol.43, issue.5, pp.477-487, 2004.

R. Bihamta, A new method for production of variable thickness aluminium tubes: Numerical and experimental studies, Journal of Materials Processing Technology, vol.211, issue.4, pp.578-589, 2011.

Q. H. Bui, Investigation of the formability limit of aluminium tubes drawn with variable wall thickness, Journal of Materials Processing Technology, vol.211, issue.3, pp.402-414, 2011.

M. Negendank, U. A. Taparli, S. Gall, S. Müller, and W. Reimers, Microstructural evolution of indirectly extruded seamless 6xxx aluminum tubes with axial variable wall thickness, Journal of Materials Processing Technology, vol.230, pp.187-197, 2016.

M. Negendank, S. Müller, and W. Reimers, Extrusion of Aluminum Tubes with Axially Graded Wall Thickness and Mechanical Characterization, Procedia CIRP, vol.18, pp.3-8, 2014.

R. Bihamta, M. R. Movahhedy, and A. R. Mashreghi, A numerical study of swage autofrettage of thick-walled tubes, Materials & Design, vol.28, issue.3, pp.804-815, 2007.

R. Bihamta, A. Ameli, M. R. Movahhedy, and A. R. Mashreghi, A comparative study on the radial and indentation forging of tubes, International Journal of Forming, vol.10, issue.2, pp.179-194, 2007.

H. Reißner, Eigenspannungen und Eigenspannungsquellen, Z. angew. Math. Mech, vol.11, issue.1, pp.1-8, 1931.

J. O. Almen and P. H. Black, Residual Stresses and fatigue in metals, 1963.

G. E. Totten, M. A. Howes, and T. Inoue, Handbook of residual stress and deformation of steel, 2002.

P. J. Withers and H. K. Bhadeshia, Residual stress. Part 2; Nature and origins, Materials Science and Technology, vol.17, issue.4, pp.366-375, 2001.

E. Macherauch, INTRODUCTION TO RESIDUAL STRESS, Residual stresses, A. Niku-Lari, vol.4, pp.1-36, 1987.

E. Heyn and . Bauer, Measurement of Residual Stresses in Cold Drawn Metals, Internationale Zeitschrift für Metaliographie, vol.1, pp.16-50, 1911.

S. Timoshenko, Strength of Materials: Part II, Advanced Theory and Problems, 1940.

S. Timoshenko, Strength of Materials: Part I, Elementary Theory and Problems, 1940.

M. I. Hetényi, Handbook of experimental stress analysis, 1963.

M. Elices, Influence of residual stresses in the performance of colddrawn pearlitic wires, Journal of Materials Science, vol.39, issue.12, pp.3889-3899, 2004.

T. Beppu, Cold finished seamless steel tubes, USA US11039954

T. Kuboki, K. Nishida, T. Sakaki, and M. Murata, Effect of plug on levelling of residual stress in tube drawing, Journal of Materials Processing Technology, vol.204, issue.1-3, pp.162-168, 2008.

P. J. Withers and H. K. Bhadeshia, Residual stress

, Measurement techniques, Materials Science and Technology, vol.17, issue.4, pp.355-365, 2001.

E. Brinksmeier, Residual Stresses -Measurement and Causes in Machining Processes, CIRP Annals -Manufacturing Technology, vol.31, issue.2, pp.491-510, 1982.

N. Tebedge, G. Alpsten, and L. Tall, Residual-stress measurement by the sectioning method, Experimental Mechanics, vol.13, issue.2, pp.88-96, 1973.

C. W. Bert and G. L. Thompson, A Method for Measuring Planar Residual Stresses in Rectangularly Orthotropic Materials, Journal of Composite Materials, vol.2, issue.2, pp.244-253, 1968.

G. S. Schajer and M. B. Prime, Use of Inverse Solutions for Residual Stress Measurements, J. Eng. Mater. Technol, vol.128, issue.3, p.375, 2006.

A. T. Dewald and M. R. Hill, Eigenstrain-based model for prediction of laser peening residual stresses in arbitrary three-dimensional bodies. Part 1: Model description, The Journal of Strain Analysis for Engineering Design, vol.44, issue.1, pp.1-11, 2009.

A. T. Dewald and M. R. Hill, Eigenstrain-based model for prediction of laser peening residual stresses in arbitrary three-dimensional bodies. Part 2: Model verification, The Journal of Strain Analysis for Engineering Design, vol.44, issue.1, pp.13-27, 2009.

S. Gary, C. O. Schajer, and . Ruud, Overview of Residual Stresses and Their Measurement, Practical Residual Stress Measurement Methods, pp.1-24, 2013.

I. C. Noyan and J. B. Cohen, Residual Stress: Measurement by Diffraction and Interpretation, 1987.

Y. Javadi, M. Akhlaghi, and M. A. Najafabadi, Using finite element and ultrasonic method to evaluate welding longitudinal residual stress through the thickness in austenitic stainless steel plates, Materials & Design, vol.45, pp.628-642, 2013.

, Structural and residual stress analysis by nondestructive methods: Evaluation -application -assessment

. Amsterdam, , 2006.

M. Born, E. Wolf, and A. B. Bhatia, Principles of optics: Electromagnetic theory of propagation, interference and diffraction of light, 2016.

, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, vol.9, 2015.

, Annual Conference on Experimental and Applied Mechanics, 2016.

G. S. Schajer and E. , Practical Residual Stress Measurement Methods. West Sussex, 2013.

J. Mathar, Determination of Initial Stresses by Measuring the Deformation Around Drilled Holes, Transactions of the American Society of Mechanical Engineering, vol.56, issue.4, pp.249-254, 1934.

S. Gary, P. S. Schajer, and . Whitehead, Hole Drilling and Ring Coring, Practical Residual Stress Measurement, pp.29-65, 2013.

, Standard Test Method for Determining Residual Stresses by the HoleDrilling Strain-Gage Method, pp.837-850

M. Steinzig and E. Ponslet, Residual Stress measurment Using the Hole Drilling Method and Laser Speckle Interferometry: Part I, Technology Application Series, pp.43-46, 2003.

P. V. Grant, J. D. Lord, and P. S. Whitehead, The Measurement of Residual Stresses by the Incremental Hole Drilling Technique: Measurement Good Practice Guide No. 53, National Physical Laboratory, 2002.

. Vishay-measurements-group and . Inc, Measurement of Residual Stresses by the Hole-Drilling Strain-Gage Method, 1993.

R. Oettel, The Determination of Uncertainties in Residual Stress Measurement (using the Hole Drilling Technique): Code of Practice No. 15, Standards Measurement & Testing Project No. SMT4-CT97-2165, 2000.

E. Ponslet and M. Steinzig, Residual Stress measurment Using the Hole Drilling Method and Laser Speckle Interferometry: Part II Analysis Technique, Technology Application Series, pp.1-5, 2003.

M. Steinzig and E. Ponslet, Residual Stress measurment Using the Hole Drilling Method and Laser Speckle Interferometry: Part IV Measurment Accuracy, Technology Application Series, pp.59-63, 2003.

C. H. Novion, The use of neutrons for materials characterization, Analysis of residual stress by diffraction using neutron and synchrotron radiation, pp.1-3, 2003.

A. J. Allen, M. T. Hutchings, C. G. Windsor, and C. Andreani, Neutron diffraction methods for the study of residual stress fields, Advances in Physics, vol.34, issue.4, pp.445-473, 2006.

E. C. Macherauch-;-g, E. Sih, and W. Sommer, Residual Stresses, Application of Fracture Mechanics to Materials and Structures

. Dahl, , pp.157-192, 1984.

L. Pintschovius, Neutron diffraction methods," in Structural and residual stress analysis by nondestructive methods: Evaluation -applicationassessment, pp.495-521, 2006.

E. Kröner, Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanten des Einkristalls, Z. Physik, vol.151, issue.4, pp.504-518, 1958.

M. T. Hutchings, Introduction to the characterization of residual stress by neutron diffraction, 2005.

G. A. Webster and R. W. Wimpory, Polycrystalline Materials Determination of Residual Stresses by Neutron Diffraction, European Communities, Italy ISO/TTA, vol.3, 2001.

S. Suwas and R. K. Ray, Crystallographic Texture of Materials, 2014.

H. J. Bunge, Three-dimensional texture analysis, International Materials Reviews, vol.32, issue.1, pp.265-291, 1987.

U. F. Kocks, Anisotropy and Symmetry, Texture and anisotropy: Preferred orientations in polycrystals and their effect on materials properties, pp.10-44, 2005.

O. Engler and V. Randle, Introduction, pp.3-14, 2009.

O. Engler and V. Randle, Evaluation and Representation of Macrotexture Data, pp.123-172, 2009.

P. S. Mathur and W. A. Backofen, Mechanical contributions to the planestrain deformation and recrystallization textures of aluminum-killed steel, vol.4, pp.643-651, 1973.

W. Truszkowski, J. Krol, and B. Major, On Penetration of Shear Texture into the Rolled Aluminum and Copper, MTA, vol.13, issue.4, pp.665-669, 1982.

D. Schläfer and H. J. Bunge, The Development of the Rolling Texture of Iron Determined by Neutron-Diffraction, Texture, vol.1, issue.3, pp.157-171, 1974.

H. Brokmeier, Texture gradient in a copper tube at maximum and minimum wall thickness, IOP Conf. Ser.: Mater. Sci. Eng, vol.82, p.12102, 2015.

H. G. Brokmeier, R. E. Bolmaro, J. A. Signorelli, and A. Fourty, Texture development of wire drawn Cu-Fe composites, Physica B: Condensed Matter, issue.0, pp.888-889, 2000.

H. Park and D. N. Lee, Deformation and annealing textures of drawn AlMg-Si alloy tubes, 5th Asia Pacific conference on Materials processing, vol.113, pp.551-555, 2001.

J. H. Cho, S. J. Park, S. H. Choi, and K. H. Oh, Deformation Texture of Cold Drawn Al6063 Tube, MSF, pp.565-570, 2002.

J. Chen, W. Yan, W. Li, J. Miao, and X. Fan, Texture evolution and its simulation of cold drawing copper wires produced by continuous casting, Transactions of Nonferrous Metals Society of China, vol.21, issue.1, pp.152-158, 2011.

N. Al-hamdany, H. Brokmeier, B. Schwebke, Z. Zhong, and N. Schell, Texture Inhomogeneity through the Thickness of a Copper Tube, 2012.

U. F. Kocks, The Representation of Orientations and Textures, Texture and anisotropy: Preferred orientations in polycrystals and their effect on materials properties, pp.44-102, 2005.

C. Hammond, The basics of crystallography and diffraction, 2013.

W. Borchardt-ott, Crystallography: An Introduction, 2012.

H. Bunge and P. R. Morris, Texture analysis in materials science: Mathematical methods, 1982.

J. S. Kallend, Determination of the Orientation Distributuion from Pole Figure Data, Texture and anisotropy: Preferred orientations in polycrystals and their effect on materials properties, pp.102-126, 2005.

H. Pursey and H. L. Cox, XXXIV. The correction of elasticity measurements on slightly anisotropic materials, The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, vol.45, issue.362, pp.295-302, 2009.

G. Wassermann and &. Bunge, Mathematische Methoden der Texturanalyse Akademie-Verlag, vol.5, p.23, 1969.

R. Roe, Description of Crystallite Orientation in Polycrystalline Materials. III. General Solution to Pole Figure Inversion, Journal of Applied Physics, vol.36, issue.6, pp.2024-2031, 1965.

H. Bunge and C. Esling, Quantitative texture analysis. Oberursel: DGM Informationsgesellschaft, 1986.

O. Engler and V. Randle, Evaluation and Representation of Macrotexture Data, pp.123-172, 2009.

W. Reimers and A. R. Pyzalla, Neutrons and Synchrotron Radiation in Engineering Materials Science, 2008.

H. J. Bunge, L. Wcislak, H. Klein, U. Garbe, and J. R. Schneider, Texture and Microstructure Analysis with High-Energy Synchrotron Radiation, Adv. Eng. Mater, vol.4, issue.5, pp.300-305, 2002.

, Neutrons and Synchrotron Radiation in Engineering Materials Science, 2008.

H. Abdolvand, On the deformation twinning of Mg AZ31B: A threedimensional synchrotron X-ray diffraction experiment and crystal plasticity finite element model, International Journal of Plasticity, vol.70, pp.77-97, 2015.

H. F. Poulsen and D. Jensen, From 2D to 3D Microtexture Investigations, pp.49-66, 2002.
DOI : 10.4028/www.scientific.net/msf.408-412.49

O. Engler and V. Randle, Synchrotron Radiation, Nondiffraction Techniques, and Comparisons between Methods, pp.351-375, 2009.

H. Weiland, Microtexture determination and its application to materials science, JOM, vol.46, issue.9, pp.37-41, 1994.
DOI : 10.1007/bf03222581

O. Engler and V. Randle, Scanning Electron Microscopy-Based Techniques, pp.203-240, 2009.

J. A. Venables and R. Bin-jaya, Accurate microcrystallography using electron back-scattering patterns, Philosophical Magazine, vol.35, issue.5, pp.1317-1332, 2006.
DOI : 10.1080/14786437708232955

V. Randle, London: Maney, for the Institute of Materials, Minerals and Mining, Microtexture determination and its applications, 2008.

H. Brokmeier, Neutron Diffraction Texture Analysis of Multi-Phase Systems, Textures and Microstructures, vol.10, issue.4, pp.325-346, 1989.

J. A. Szpunar, Texture studies using neutron diffraction, J Mater Sci, vol.19, issue.11, pp.3467-3476, 1984.
DOI : 10.1007/bf02396921

M. A. Wells, B. Hernandez-morales, J. H. Root, and E. B. Hawbolt, Neutron diffraction in the materials science toolbox, Physica B: Condensed Matter, pp.1274-1276, 1997.

S. Yip and E. , Handbook of materials modeling, 2005.

D. M. Kochmann, Kochmann Research Group -California Institute of Technology, 2017.

S. Yip, Introduction, Handbook of materials modeling, pp.1-5, 2005.

D. L. Mcdowell and G. B. Olson, Concurrent design of hierarchical materials and structures, Sci Model Simul, vol.15, issue.1-3, pp.207-240, 2008.

M. F. Horstemeyer, Integrated computational materials engineering (ICME) for metals: Using multiscale modeling to invigorate engineering design with science, 2012.

, Handbook of software solutions for ICME, 2017.

M. F. Horstemeyer, Integrated computational materials engineering: Using multiscale modeling to invigorate engineering design witg science, 2011.

F. R. Nabarro, Mathematical theory of stationary dislocations, Advances in Physics, vol.1, issue.3, pp.269-394, 1952.

J. M. Burgers, Some considerations on the fields of stress connected with dislocations in a regular crystal lattice. I (en), Physics

L. M. Brown, The self-stress of dislocations and the shape of extended nodes, Philosophical Magazine, vol.10, issue.105, pp.441-466, 1964.

D. J. Bacon, A Method for Describing a Flexible Dislocation, physica status solidi (b), vol.23, 1967.

A. J. Foreman, The bowing of a dislocation segment, Philosophical Magazine, vol.15, issue.137, pp.1011-1021, 1967.

E. O. Hall, The Deformation and Ageing of Mild Steel: III Discussion of Results, Proceedings of the Physical Society. Section B, vol.64, issue.9, p.747, 1951.

N. J. Petch, The Cleavage Strength of Polycrystals, Journal of the Iron and Steel Institute, vol.174, pp.25-28, 1953.

M. F. Ashby, The Deformation of Plasticity Non-Homogeneous Alloys, Strengthening methods in crystals, pp.137-193, 1971.

F. C. Frank, The influence of dislocations on crystal growth, Discuss. Faraday Soc, vol.5, issue.0, pp.48-54, 1949.

F. C. Frank, Crystal dislocations.-Elementary concepts and definitions, The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, vol.42, issue.331, pp.809-819, 1951.

W. T. Read, Dislocations and plastic deformation, Physics Today, vol.6, issue.11, pp.10-13, 1953.
DOI : 10.1063/1.3061039

D. A. Hughes, D. B. Dawson, J. S. Korellls, and L. I. Weingarten, Near surface microstructures developing under large sliding loads, JMEP, vol.3, issue.4, pp.459-475, 1994.
DOI : 10.1007/bf02645312

H. Mecking and U. F. Kocks, A Mechanism for Static and Dynamic Recovery, International series on the strength and fracture of materials and structures, Strength of metals and alloys: Proceedings of the 5th International Conference, pp.345-350, 1979.
DOI : 10.1016/b978-1-4832-8412-5.50063-1

N. A. Fleck, G. M. Muller, M. F. Ashby, and J. W. Hutchinson, Strain gradient plasticity: Theory and experiment, Acta Metallurgica et Materialia, vol.42, issue.2, pp.475-487, 1994.
DOI : 10.1016/0956-7151(94)90502-9

E. B. Tadmor, M. Ortiz, and R. Phillips, Quasicontinuum analysis of defects in solids, Philosophical Magazine A, vol.73, issue.6, pp.1529-1563, 1996.

E. B. Tadmor, R. Phillips, and M. Ortiz, Hierarchical modeling in the mechanics of materials, International Journal of Solids and Structures, vol.37, issue.1-2, pp.379-389, 2000.

R. Phillips, Crystals, defects and microstructures: Modeling across scales, 2001.
DOI : 10.1115/1.1470666

W. K. Liu, E. G. Karpov, and H. S. Park, Nano mechanics and materials: Theory, multiscale methods and applications, 2006.
DOI : 10.1002/0470034106
URL : https://onlinelibrary.wiley.com/doi/pdf/10.1002/0470034106.fmatter

S. Kohlhoff, S. Schmauder, D. J. Srolovitz, V. Vitek, and . Ed, A New Method for Coupled ElasticAtomistic Modelling, Atomistic Simulation of Materials: Beyond Pair Potentials, pp.411-418, 1989.

S. Kohlhoff, P. Gumbsch, and H. F. Fischmeister, Crack propagation in b.c.c. crystals studied with a combined finite-element and atomistic model, Philosophical Magazine A, vol.64, issue.4, pp.851-878, 1991.

L. E. Shilkrot, R. E. Miller, and W. A. Curtin, Coupled atomistic and discrete dislocation plasticity, Physical review letters, vol.89, issue.2, p.25501, 2002.
DOI : 10.1103/physrevlett.89.025501

L. E. Shilkrot, R. E. Miller, and W. A. Curtin, Multiscale plasticity modeling: Coupled atomistics and discrete dislocation mechanics, Journal of the Mechanics and Physics of Solids, vol.52, issue.4, pp.755-787, 2004.
DOI : 10.1016/j.jmps.2003.09.023

B. Shiari, R. E. Miller, and W. A. Curtin, Coupled Atomistic/Discrete Dislocation Simulations of Nanoindentation at Finite Temperature, J. Eng. Mater. Technol, vol.127, issue.4, p.358, 2005.

D. Raabe, F. Roters, and F. , , 2002.

F. Roters, P. Eisenlohr, T. R. Bieler, and D. Raabe, Introduction to Crystalline Anisotropy and the Crystal Plasticity Finite Element Method, Crystal Plasticity Finite Element Methods, Dr. Franz Roters, Dr.-Ing

P. Eisenlohr, . Prof, . Dr, R. Thomas, and . Bieler, Prof. Dr. Dierk Raabe, pp.1-9, 2010.

P. R. Dawson, On modeling of mechanical property changes during flat rolling of aluminum, International Journal of Solids and Structures, vol.23, issue.7, pp.947-968, 1987.

D. Peirce, R. J. Asaro, and A. Needleman, An analysis of nonuniform and localized deformation in ductile single crystals, Acta Metallurgica, vol.30, issue.6, pp.1087-1119, 1982.

U. F. Kocks, C. N. Tomé, and H. R. Wenk, Texture and anisotropy: Preferred orientations in polycrystals and their effect on materials properties, 2005.

M. F. Horstemeyer, G. P. Potirniche, and E. B. Marin, Crystal Plasticity, Handbook of materials modeling, pp.1133-1151, 2005.

M. F. Horstemeyer, G. P. Potirniche, and E. B. Marin, Crystal Plasticity, Handbook of materials modeling, pp.1133-1149, 2005.

S. Yi, Investigation on the Deformation Behavior and the Texture Evolution in Magnesium Wrought Alloy AZ31, Dissertation, Institute of Materials Science and Engineering, 2005.

D. Hull and D. J. Bacon, Introduction to dislocations, 2011.

G. I. Taylor, Plastic Strain in Metals, Journal of the Institute of Metals, vol.62, pp.307-324, 1938.

E. Kaxiras and S. Yip, Introduction: Atomistic Nature of Materials," in Handbook of materials modeling, pp.451-459, 2005.

M. Stoneham, J. Harding, and T. Harker, The Shell Model and Interatomic Potentials for Ceramics, MRS Bull, vol.21, issue.02, pp.29-35, 1996.

D. W. Brenner, Chemical Dynamics and Bond-Order Potentials, MRS Bull, vol.21, issue.02, pp.36-41, 1996.

Y. Mishin, Interatomic Potentials for Metals, Handbook of materials modeling, S. Yip, pp.459-479, 2005.

M. I. Baskes, Modified embedded-atom potentials for cubic materials and impurities, Phys. Rev. B, vol.46, issue.5, pp.2727-2742, 1992.

B. Lee, J. Shim, and M. I. Baskes, Pb based on first and second nearest-neighbor modified embedded atom method, Phys. Rev. B, vol.68, issue.14, 2003.

B. Jelinek, Modified embedded atom method potential for Al, Si, Mg, Cu, and Fe alloys, Phys. Rev. B, vol.85, issue.24, 2012.

C. A. Becker, F. Tavazza, Z. T. Trautt, and R. A. Buarque-de-macedo, Considerations for choosing and using force fields and interatomic potentials in materials science and engineering, Current Opinion in Solid State and Materials Science, vol.17, issue.6, pp.277-283, 2013.

J. R. Ray, Ensembles and Computer Simulation Calculation of Response Functions, Handbook of materials modeling, S. Yip, pp.729-745, 2005.

C. Y. Fong, Topics in computational materials science, 1998.

M. J. Mehl, B. M. Klein, and D. A. Papaconstantopoulos, First -principles calculation of elastic properties of metals, Intermetallic compounds: Principles and pratice, pp.195-210

N. Marzari, Understand, Predict, and Design, Handbook of materials modeling, S. Yip, pp.9-13, 2005.
DOI : 10.1007/978-1-4020-3286-8_2

J. R. Chelikowsky, Electronic Scale, Handbook of materials modeling, S. Yip, pp.121-137, 2005.

W. Greiner, Quantum Mechanics: An Introduction, 2001.

F. Roters, P. Eisenlohr, T. R. Bieler, and R. , Crystal Plasticity Finite Element Methods: in Materials Science and Enginee, 2010.

O. C. Zienkiewicz, R. L. Taylor, and D. D. Fox, The finite element method for solid and structural mechanics, 2014.

J. N. Reddy, An introduction to the finite element method, 2006.

R. D. Cook, Concepts and applications of finite element analysis, 2002.

A. E. Tekkaya, J. Gerhardt, and M. Burgdorf, Residual Stresses in ColdFormed Workpieces, CIRP Annals -Manufacturing Technology, vol.34, issue.1, pp.225-230, 1985.
DOI : 10.1016/s0007-8506(07)61761-2

J. M. Rigaut, D. Lochegnies, J. Oudin, J. C. Gelin, and Y. Ravalard, Numerical analysis of cold drawing of tubes, Modelling of Metal Forming Processes: Proceedings of the Euromech 233 Colloquium, pp.261-268, 1988.

M. Pietrzyk and L. Sadok, Validation of the finite-element model of the tube-sinking process, Journal of Materials Processing Technology, vol.22, issue.1, pp.65-73, 1990.

K. Sawamiphakdi, G. D. Lahoti, and P. K. Kropp, Simulation of a tube drawing process by the finite element method, Journal of Materials Processing Technology, vol.27, issue.1-3, pp.179-190, 1991.

L. Sadok, M. Pietrzyk, and M. Pa?ko, Strains in the tube-sinking process evaluated by the finite element method and experimental technique, Steel Research, vol.62, issue.6, pp.255-260, 1991.

S. Mulot, A. Hacquin, P. Montmitonnet, and J. L. Aubin, A fully 3D finite element simulation of cold pilgering, Journal of Materials Processing Technology, vol.60, issue.1-4, pp.505-512, 1996.
DOI : 10.1016/0924-0136(96)02378-3

J. Mackerle, Finite elements in the analysis of pressure vessels and piping-a bibliography, International Journal of Pressure Vessels and Piping, vol.69, issue.3, pp.279-339, 1976.

M. Rumi?ski, J. ?uksza, J. Kusiak, and M. Pa?ko, Analysis of the effect of die shape on the distribution of mechanical properties and strain field in the tube sinking process, Journal of Materials Processing Technology, pp.683-689, 1998.

K. Yoshida and H. Furuya, Mandrel drawing and plug drawing of shapememory-alloy fine tubes used in catheters and stents, Journal of Materials Processing Technology, issue.0, pp.145-150, 2004.

F. O. Neves, S. T. Button, C. Caminaga, and F. C. Gentile, Numerical and experimental analysis of tube drawing with fixed plug, Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.27, pp.426-431, 2005.

H. Palkowski, S. Brück, T. Pirling, and A. Carradò, Investigation on the Residual Stress State of Drawn Tubes by Numerical Simulation and Neutron Diffraction Analysis, Materials, vol.6, issue.11, pp.5118-5130, 2013.

B. Gmbh,

, Standard Specification for Seamless Copper Tube, p.75

A. G. Kme,

, GE Inspection Technologies

J. Naumann, Konstruktion eines Ziehmatrizenhalters für Rohrziehversuche, 2014.

S. Gmbh,

T. Pirling, G. Bruno, and P. J. Withers, SALSA-A new instrument for strain imaging in engineering materials and components, Materials Science and Engineering: A, vol.437, issue.1, pp.139-144, 2006.

D. J. Hughes, G. Bruno, T. Pirling, and P. J. Withers, Scientific Review: First Impressions of SALSA: The New Engineering Instrument at ILL, Neutron News, vol.17, issue.3, pp.28-32, 2006.

M. Hofmann, W. Gan, and J. Rebelo-kornmeier, STRESS-SPEC: Materials science diffractometer, JLSRF, vol.1, 2015.
DOI : 10.17815/jlsrf-1-25
URL : https://jlsrf.org/index.php/lsf/article/download/25/pdf

A. Nowfal and . Al-hamdany, Texture and Stress Characterization of a Copper Tube by Neutron, Synchrotron and Electron Diffraction, Dissertation, Institute of Materials Science and Technology, 2015.

N. Schell, The High Energy Materials Science Beamline (HEMS) at PETRA III, MSF, vol.772, pp.57-61, 2013.

, OIM? Analysis for the Visualization and Analysis of EBSD Mapping Data, 2017.

D. Mainprice, F. Bachmann, R. Hielscher, and H. Schaeben, Descriptive tools for the analysis of texture projects with large datasets using MTEX: Strength, symmetry and components, Geological Society, vol.409, issue.1, pp.251-271, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01277689

P. Giannozzi, QUANTUM ESPRESSO: a modular and opensource software project for quantum simulations of materials, Journal of physics. Condensed matter : an Institute of Physics journal, vol.21, issue.39, p.395502, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00717147

Q. Espresso and P. ,

C. D. Barrett and R. L. Carino, The MEAM parameter calibration tool: An explicit methodology for hierarchical bridging between ab initio and atomistic scales, Integr Mater Manuf Innov, vol.5, issue.1, p.25, 2016.

S. Plimpton, Fast Parallel Algorithms for Short-Range Molecular Dynamics, Journal of Computational Physics, vol.117, issue.1, pp.1-19, 1995.

A. Stukowski, Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool, Modelling and Simulation in Materials Science and Engineering, vol.18, issue.1, p.15012, 2010.

H. M. Zbib, M. Hiratani, and M. Shehadeh, Multiscale Discrete Dislocation Dynamics Plasticity, Continuum scale simulation of engineering materials: Fundamentals, microstructures, process applications, D. Raabe, pp.201-229, 2004.

R. Abbaschian, R. E. Reed-hill, and L. Abbaschian, Physical metallurgy principles, 2009.

A. Hibbitt, , 2016.

. Habbitt, Abaqus User Subroutines Reference Manual. USA: Hibbitt, 2016.

J. R. Kornmeier, J. ?aroun, J. Gibmeier, and M. Hofmann, Neutron Residual Strain Surface Scans -Experimental Results and Monte Carlo Simulations, Materials Science Forum, pp.52-59, 2013.

S. Zhang, H. Xie, X. Zeng, and P. Hing, Residual stress characterization of diamond-like carbon coatings by an X-ray diffraction method, Surface and Coatings Technology, vol.122, issue.2-3, pp.219-224, 1999.

T. Pirling, A. Carradò, S. Brück, and H. Palkowski, Neutron Stress Imaging of Drawn Copper Tube: Comparison with Finite-Element Model, Metall and Mat Trans A, vol.39, issue.13, pp.3149-3154, 2008.

S. Suwas, A. K. Singh, K. N. Rao, and T. Singh, Effect of modes of rolling on evolution of the texture in pure copper and some copper-base alloys, MEKU, vol.93, issue.9, pp.928-937, 2002.

O. Engler and V. Randle, Macrotexture Measurements, pp.75-121, 2009.

A. A. Ridha and W. B. Hutchinson, Recrystallisation mechanisms and the origin of cube texture in copper, Acta Metallurgica, vol.30, issue.10, pp.1929-1939, 1982.

O. Engler, Deformation and texture of copper-manganese alloys, Acta Materialia, vol.48, issue.20, pp.4827-4840, 2000.

M. Hatherley and W. B. Hutchinson, An introduction to textures in metals. London: Institution of metallurgists, 1980.

G. Wassermann and J. Grewen, Texturen metallischer Werkstoffe. Goetingen, 1962.

A. J. Wilkinson and P. B. Hirsch, Electron diffraction based techniques in scanning electron microscopy of bulk materials, Micron, vol.28, issue.4, pp.279-308, 1997.

O. Engler and V. Randle, Microtexture Analysis, p.173, 2009.

A. J. Schwartz, M. Kumar, B. L. Adams, and D. P. Field, Electron backscatter diffraction in materials science, 2009.

M. C. Michelini, R. P. Diez, and A. H. Jubert, A density functional study of small nickel clusters, Int. J. Quant. Chem, vol.70, issue.4-5, pp.693-701, 1998.

E. S. Drexler, N. J. Simon, and R. P. Reed, Properties of copper and copper alloys at cryogenic temperatures, NIST NIST-MN-177, 1996.

Z. Yang, L. Xie, D. Ma, and G. Wang, Origin of the High Activity of the Ceria-Supported Copper Catalyst for H 2 O Dissociation, J. Phys. Chem. C, vol.115, issue.14, pp.6730-6740, 2011.

, Copper | The Periodic Table at KnowledgeDoor

N. F. Mott, The Mechanical Properties of Metals, Proc. Phys. Soc. B, vol.64, issue.9, p.729

W. T. Read, Dislocations in Crystals. New York, 1953. 228 pp. Illus. $5, p.228, 1953.

T. Vegge and K. W. Jacobsen, Atomistic simulations of dislocation processes in copper, J. Phys.: Condens. Matter, vol.14, issue.11, p.2929, 2002.
DOI : 10.1088/0953-8984/14/11/309
URL : http://orbit.dtu.dk/en/publications/atomistic-simulations-of-dislocation-processes-in-copper(2bc04327-68e7-4a76-b214-01a610e1a40e).html

S. Crampin, K. Hampel, D. D. Vvedensky, and J. M. Maclaren, The calculation of stacking fault energies in close-packed metals, J. Mater. Res, vol.5, issue.10, pp.2107-2119, 1990.

J. Hartford, B. Sydow, G. Wahnström, and B. I. Lundqvist, Peierls barriers and stresses for edge dislocations in Pd and Al calculated from first principles, Phys. Rev. B, vol.58, issue.5, pp.2487-2496, 1998.
DOI : 10.1103/physrevb.58.2487

E. Asadi, M. A. Zaeem, A. Moitra, and M. A. Tschopp, Effect of vacancy defects on generalized stacking fault energy of fcc metals, J. Phys.: Condens. Matter, vol.26, issue.11, p.115404, 2014.

C. Brandl, P. M. Derlet, and H. Van-swygenhoven, General-stackingfault energies in highly strained metallic environments: Ab initio calculations, Phys. Rev. B, vol.76, issue.5, 2007.

D. J. Oh and R. A. Johnson, Simple embedded atom method model for fec and hcp metals, J. Mater. Res, vol.3, issue.03, pp.471-478, 1988.
DOI : 10.1557/jmr.1988.0471

A. F. Voter and S. P. Chen, Accurate Interatomic Potentials for Ni, Al and Ni3Al, MRS Proc, vol.82, 1986.
DOI : 10.1557/proc-82-175

J. P. Hirth and E. , Dislocations in solids, 1979.

S. Groh, E. B. Marin, M. F. Horstemeyer, and H. M. Zbib, Multiscale modeling of the plasticity in an aluminum single crystal, International Journal of Plasticity, vol.25, issue.8, pp.1456-1473, 2009.

D. L. Olmsted, L. G. Jr, W. A. Curtin, and R. J. Clifton, Atomistic simulations of dislocation mobility in Al, Ni and Al/Mg alloys, Modelling Simul. Mater. Sci. Eng, vol.13, issue.3, p.371, 2005.

C. L. Kelchner, S. J. Plimpton, and J. C. Hamilton, Dislocation nucleation and defect structure during surface indentation, Phys. Rev. B, vol.58, issue.17, p.11085, 1998.
DOI : 10.1103/physrevb.58.11085

M. F. Horstemeyer, Hierarchical Bridging Between Ab Initio and Atomistic Level Computations: Calibrating the Modified Embedded Atom References Method (MEAM) Potential (Part A), JOM, vol.67, issue.1, pp.143-147, 2015.

J. M. Hughes, Hierarchical Bridging Between Ab Initio and Atomistic Level Computations: Sensitivity and Uncertainty Analysis for the Modified Embedded-Atom Method (MEAM) Potential (Part B), vol.67, pp.148-153, 2015.
DOI : 10.1007/s11837-014-1205-7

H. M. Ledbetter and E. R. Naimon, Elastic Properties of Metals and Alloys. II. Copper, Journal of Physical and Chemical Reference Data, vol.3, issue.4, pp.897-935, 1974.

S. Chandra, M. K. Samal, V. M. Chavan, and R. J. Patel, Multiscale modeling of plasticity in a copper single crystal deformed at high strain rates, Plasticity and Mechanics of Defects, vol.1, issue.1

S. A. Zahedi, A. Roy, and V. V. Silberschmidt, Modeling of Micromachining Single-crystal f.c.c. Metals, Procedia CIRP, vol.8, pp.346-350, 2013.

K. Fusenig and E. Nembach, Dynamic dislocation effects in precipitation hardened materials, Acta Metallurgica et Materialia, vol.41, issue.11, pp.3181-3189, 1993.
DOI : 10.1016/0956-7151(93)90048-w

K. M. Jassby and T. Vreeland, An experimental study of the mobility of edge dislocations in pure copper single crystals, Philosophical Magazine, vol.21, issue.174, pp.1147-1168, 2006.

E. B. Marin, On the formulation of a crystal plasticity model, Sandia National Laboratories SAND2006-4170, 2006.

Y. Wang, D. Raabe, C. Klüber, and F. Roters, Orientation dependence of nanoindentation pile-up patterns and of nanoindentation microtextures in copper single crystals, Acta Materialia, vol.52, issue.8, pp.2229-2238, 2004.

N. Zaafarani, D. Raabe, R. N. Singh, F. Roters, and S. Zaefferer, Threedimensional investigation of the texture and microstructure below a nanoindent in a Cu single crystal using 3D EBSD and crystal plasticity finite element simulations, Acta Materialia, vol.54, issue.7, pp.1863-1876, 2006.

. Habbitt, Abaqus 2016 Theory Manual. USA: Hibbitt, 2016.

V. L. Popov, Coulomb's Law of Friction, Contact Mechanics and Friction, pp.133-154, 2010.

S. Ogata, Ab initio Study of Mechanical Deformation, Handbook of materials modeling, S. Yip, pp.439-448, 2005.
DOI : 10.1007/978-1-4020-3286-8_21

L. Davison, A. L. Stevens, and M. E. Kipp, Theory of spall damage accumulation in ductile metals, Journal of the Mechanics and Physics of Solids, vol.25, issue.1, pp.11-28, 1977.

E. Kröner, Allgemeine Kontinuumstheorie der Versetzungen und Eigenspannungen, Arch. Rational Mech. Anal, vol.4, issue.1, pp.273-334, 1959.

E. H. Lee, Elastic-Plastic Deformation at Finite Strains, J. Appl. Mech, vol.36, issue.1, p.1, 1969.
DOI : 10.21236/ad0678483

R. J. Asaro, Crystal Plasticity, J. Appl. Mech, vol.50, issue.4b, p.921, 1983.

M. M. Rashid and S. Nemat-nasser, A constitutive algorithm for ratedependent crystal plasticity, Computer Methods in Applied Mechanics and Engineering, vol.94, issue.2, pp.201-228, 1992.
DOI : 10.1016/0045-7825(92)90147-c

L. Anand and M. Kothari, A computational procedure for rateindependent crystal plasticity, Journal of the Mechanics and Physics of Solids, vol.44, issue.4, pp.525-558, 1996.

P. R. Dawson and E. B. Marin, Computational Mechanics for Metal Deformation Processes Using Polycrystal Plasticity, Advances in Applied Mechanics, Advances in applied mechanics, pp.77-169, 1999.
DOI : 10.1016/s0065-2156(08)70320-x

G. I. Taylor and C. F. Elam, The Distortion of an Aluminium Crystal during a Tensile Test, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.102, issue.719, pp.643-667, 1923.

E. Schmid, Ueber die Schubverfestigung von Einkristallen bei plastischer Deformation, Z. Physik, vol.40, issue.1-2, pp.54-74, 1926.
DOI : 10.1007/bf01390836

G. I. Taylor, Plastic strain in metals, Journal of the Institute of Metals, vol.62, pp.307-324, 1938.

J. F. Bishop and R. Hill, A theoretical derivation of the plastic properties of a polycrystalline face-centred metal, Philosophical Magazine, vol.42, issue.7, pp.1298-1307, 1951.

J. Sevillano, P. Van-houtte, and E. Aernoudt, Large strain work hardening and textures, Progress in Materials Science, vol.25, issue.2-4, pp.69-134, 1980.

U. F. Kocks, H. Wenk, and C. N. Tomé, Texture and anisotropy: Preferred orientations in polycrystals and their effect on materials properties, 1998.

F. Roters, Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finiteelement modeling: Theory, experiments, applications, Acta Materialia, vol.58, issue.4, pp.1152-1211, 2010.

M. Kuroda, On scale-dependent crystal plasticity models," in Plasticity and beyond: Microstructures, crystal-plasticity and phase References transitions

U. F. Kocks, A. S. Argon, and M. F. Ashby, Thermodynamics and kinetics of slip, 1975.

M. A. Meyers, Constitutive description of dynamic deformation: Physically-based mechanisms, Materials Science and Engineering: A, vol.322, issue.1-2, pp.194-216, 2002.

M. Kothari and L. Anand, Elasto-viscoplastic constitutive equations for polycrystalline metals: Application to tantalum, Journal of the Mechanics and Physics of Solids, vol.46, issue.1, pp.51-83, 1998.

P. Haasen, V. Gerold, and G. Kostorz, Strength of metals and alloys: Proceedings of the 5th International Conference, pp.1979-1980, 1979.

A. H. Cottrell, Theory of dislocations, Progress in Metal Physics, vol.4, pp.205-264, 1953.

E. Van-der-giessen and A. Needleman, Discrete dislocation plasticity: a simple planar model, Modelling Simul. Mater. Sci. Eng, vol.3, issue.5, p.689

J. Weertman and J. R. Weertman, Elementary dislocation theory, 1992.

J. P. Hirth and J. Lothe, Theory of dislocations, 1992.

H. M. Zbib and T. A. Khraishi, Dislocation Dynamics, Handbook of materials modeling, S. Yip, pp.1097-1114, 2005.

J. P. Hirth, M. Rhee, and H. Zbib, Modeling of deformation by a 3D simulation of multiple, Journal of ComputerAided Materials Design, vol.3, pp.164-166, 1996.

M. S. Daw and M. I. Baskes, Embedded-atom method: Derivation and application to impurities, surfaces, and other defects in metals, Phys. Rev. B, vol.29, issue.12, pp.6443-6453, 1984.

D. A. Porter and K. E. Easterling, Phase transformations in metals and alloys, 1997.

D. S. Sholl and J. Steckel, Density functional theory: A practical introduction, 2009.

P. Giannozzi and S. Baroni, Density-Functional Perturbation Theory, Handbook of materials modeling, S. Yip, pp.195-215, 2005.

I. J. Beyerlein, L. S. Tóth, C. N. Tomé, and S. Suwas, Role of twinning on texture evolution of silver during equal channel angular extrusion, Philosophical Magazine, vol.87, issue.6, pp.885-906, 2007.

S. Li, I. J. Beyerlein, and D. J. Alexander, Characterization of deformation textures in pure copper processed by equal channel angular extrusion via route A, Materials Science and Engineering: A, vol.431, issue.1-2, pp.339-345, 2006.

I. J. Beyerlein and L. S. Tóth, Texture evolution in equal-channel angular extrusion, Progress in Materials Science, vol.54, issue.4, pp.427-510, 2009.

P. M. Dixit and U. S. Dixit, Modeling of metal forming and machining processes: By finite element and soft computing methods, 2008.

T. Mitglied, The Minerals, Metals & Materials Society" seit 02, 2014.

D. Mitarbeit-im and . Fachausschuss, Ziehen" bei DGM" seit 04, 2013.

M. Vdeh, Verein Deutscher Eisenhüttenleute, Hobbies Joggen

F. Foadian, A. Carradó, T. Pirling, and H. Palkowski, Residual stresses evolution in Cu tubes, cold drawn with tilted dies -Neutron diffraction measurements and finite element simulation, Materials & Design, 2016.

F. Foadian, A. Carradò, H. Palkowski, and *. , Precision Tube Production: Influencing the Eccentricity and Residual Stresses by Tilting and Shifting, Journal of Materials Processing and Technology, vol.222, pp.155-162

M. Akdesir, D. Zhou, F. Foadian, and H. Palkowski, Study of Different Surface Pre-treatment Methods on Bonding Strength of Multilayer Aluminium Alloys/Steel Clad Material, International Journal of Engineering Research & Science, vol.2, pp.169-177, 2016.

F. Foadian, M. Soltanieh, *. , M. Adeli, and M. Etminanbakhsh, A Study on the Formation of Intermetallics during the Heat Treatment of Explosively Welded Al-Ti Multilayers, Metallurgical and Materials Transactions A, 2013.

F. Foadian, M. Soltanieh, *. , M. Adeli, and M. Etminanbakhsh, The Kinetics of TiAl3 Formation in Explosively Welded Ti-Al Multilayers during Heat Treatment, Metallurgical and Materials Transactions B, 2016.

F. Foadian, M. Soltanieh, *. , M. Adeli, and M. Etminanbakhsh, The Formation of TiAl3 during Heat Treatment in Explosively Welded Ti-Al Multilayers, Iranian Journal of Materials Science & Engineering, vol.11, pp.12-19, 2014.

F. Foadian, *. , F. Feyzi, S. Haghighat, and H. Aghajani, Nitrogen Diffusion in Different Microstructures of Plasma Nitrided CK45 Steel, vol.30, pp.86-90, 2014.

A. Carradò, F. Foadian, H. Palkowski, and . Chapter, Tube Drawing with Tilted and Shifted Die, 60 Excellent Inventions in Metal Forming, pp.433-438, 2015.

F. Foadian, A. Carradò, and H. Palkowski, Study the eccentricity variations due to the tilting of the die in tube drawing process for aluminum, brass and steel tubes; numerically and experimentally, Advanced Metal Forming Processes in Automotive Industry New Materials for Vehicle Components, 2015.

F. Foadian, C. P. Antoine, and H. Palkowski, Simulation der Entwicklung von Brammenkantenfehlern in der Brammenstauchpresse und Vorstraße einer Warmbreitbandanlage, XXXV. Verformungskundliches Kolloquium, 2016.

F. Foadian, A. Carradò, and H. Palkowski, Simulation der Kombination von Kippung und Versetzung auf die Exzentrizität und Eigenspannungen von Rohren beim Gleitziehen, Kupfer Symposium, 2015.

F. Foadian, A. Carradò, and H. Palkowski, Kombination von Kippung und Versetzung Einfluss auf die Exzentrizität von Rohren beim Gleitziehen, WerkstoffWoche, 2015.

F. Foadian, A. Carradò, and H. Palkowski, Einfluss der Vorrohr-und Auslaufführung auf die Exzentrizität und Eigenspannungen von Rohren beim Gleitziehen, XXXIII Verformungskundliches Kolloquium, 2015.

F. Foadian, A. Carradò, and H. Palkowski, Precision Tube Production: Influencing the Eccentricity and Residual stresses by Tilting and Shifting, 1. Niedersächsisches Symposium Materialtechnik, 2015.

F. Foadian, A. Carradò, and H. Palkowski, Numerical studies of residual stresses and eccentricity of drawn copper tubes with titled and shifted die, TMS, 2015.

M. Soltanieh, F. Foadian, H. Amani, M. Adeli, and M. Etminanbakhsh, On the kinetics of Intermetallic Phase Formation during the Heat Treatment of Explosively Welded Al/Ti and Al/Cu Bimetals, p.9

, Aluminum Two Thousand, pp.12-16, 2015.

F. Foadian, M. Soltanieh, and M. Adeli, Kinetics of the Formation of Intermetallics during the Heat Treatment of Explosively Welded Al-Ti Multilayers, 15th International Conference on Advances in Materials and Processing Technologies, 2012.

F. Foadian, M. Soltanieh, and M. Adeli, Intermetallic formation by heat treatment of explosively welded Al-Ti layers, second Iran International Aluminum Conference, pp.15-16, 2012.

F. Foadian and H. Palkowski, Einfluss der Vorrohr-und Auslaufführung auf die Exzentrizität und Eigenspannungen von Rohren beim Gleitziehen, AiF 17263 N final report, 2014.

F. Foadian, C. P. Antoine, and H. Palkowski, Grundlegende Simulation des Umformvorgangs in der Brammenstauchpresse und Vorstraße, 2014.

F. Foadian, H. Brokmeier, and H. Palkowski, Numerical and Experimental study of texture, residual stresses, and eccentricity evolution in drawn copper tubes, DFG proposal, 2014.

F. Foadian and H. Palkowski, Gezielte Beeinflussung der Exzentrizität und Eigenspannungen beim Gleitziehen von Rohren -Entwicklung einer InLine-Messung und Regelung, AiF Proposal, 2015.

F. Foadian and H. Palkowski, Numerical study of eccentricity, ovality, and residual stresses in drawn copper tubes with tilted and shifted die(s), 2015.

. Farzad-foadian-clausthal-zellerfeld,