.. .. Modelling,

.. .. Results,

E. Trajectory and . .. Power-chain-sizing-optimization,

.. .. Conclusion, , p.217

P. .. Summary,

.. .. Contributions,

, Limitations and Propositions for Future Work

F. Abevi, A. Daidie, M. Chaussumier, and M. Sartor, Static load distribution and axial stiffness in a planetary roller screw mechanism, Journal of Mechanical Design, vol.138, issue.1, p.12301, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01950786

. Airliners and . Net, A380 load alleviation function, 2018.

A. Chama, L. Bertram, and O. , Identifying enhancement potentials of actuation systems using a criticality index. Recent Advances in Aerospace Actuation Systems and Components, INSA Toulouse, pp.211-218, 2018.

M. Alavi and D. E. Leidner, Knowledge management and knowledge management systems: Conceptual foundations and research issues, MIS quarterly, pp.107-136, 2001.

N. Alexandrov and R. Lewis, Algorithmic perspectives on problem formulations in mdo, 8th Symposium on Multidisciplinary Analysis and Optimization, p.4719, 2000.

L. Allain, Capitalisation et traitement des modèles pour la conception en génie électrique, 2003.

J. T. Allison, M. Kokkolaras, and P. Y. Papalambros, Optimal partitioning and coordination decisions in decomposition-based design optimization, Journal of Mechanical Design, vol.131, issue.8, p.81008, 2009.

A. Bouhlel, M. Bartoli, N. Regis, R. G. Otsmane, A. Morlier et al., Efficient global optimization for high-dimensional constrained problems by using the kriging models combined with the partial least squares method. Engineering Optimization, pp.1-16, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01717251

C. Andersson, Methods and tools for co-simulation of dynamic systems with the functional mock-up interface, Doctoral Theses in Mathematical Sciences, 2016.

, Ansys: Engineering simulation and 3-d design software, ANSYS, 2018.

S. Arp, 4761. Guidelines and methods for conducting the safety assessment process on civil airborne systems and equipment, p.12, 1996.

S. Arp, ). 4754a. Guidelines for Development of, Civil Aircraft and Systems, vol.12, p.41, 2010.

S. V. Ashok, An integrated product-process development (IPPD) based approach for rotorcraft drive system sizing, synthesis and design optimization, 2013.

A. G. Association, , 2018.

R. J. Balling and J. Sobieszczanski-sobieski, Optimization of coupled systems-a critical overview of approaches, AIAA journal, vol.34, issue.1, pp.6-17, 1996.

R. Barrett and J. Stutts, Development of a piezoceramic flight control surface actuator for highly compressed munitions, 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, p.2034, 1998.

N. Bartoli, T. Lefebvre, S. Dubreuil, R. Olivanti, N. Bons et al., An adaptive optimization strategy based on mixture of experts for wing aerodynamic design optimization, 18th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, p.4433, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02043097

A. D. Belegundu and T. R. Chandrupatla, Optimization concepts and applications in engineering, 2011.

D. Blanding, Subsystem design and integration for the more electric aircraft, 5th international energy conversion engineering conference and exhibit (IECEC), p.4828, 2007.

C. Bloebaum, Coupling strength-based system reduction for complex engineering design, Structural Optimization, vol.10, issue.2, pp.113-121, 1995.

M. Bostock, V. Ogievetsky, and J. Heer, D 3 data-driven documents, IEEE transactions on visualization and computer graphics, vol.17, issue.12, pp.2301-2309, 2011.

M. A. Bouhlel, N. Bartoli, A. Otsmane, and J. Morlier, Improving kriging surrogates of high-dimensional design models by partial least squares dimension reduction. Structural and Multidisciplinary Optimization, vol.53, pp.935-952, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01598259

R. D. Braun, A. A. Moore, and I. M. Kroo, Collaborative approach to launch vehicle design, Journal of spacecraft and rockets, vol.34, issue.4, pp.478-486, 1997.

E. Brochu, V. M. Cora, D. Freitas, and N. , A tutorial on bayesian optimization of expensive cost functions, with application to active user modeling and hierarchical reinforcement learning, 2010.

T. R. Browning, Applying the design structure matrix to system decomposition and integration problems: a review and new directions, IEEE Transactions on Engineering management, vol.48, issue.3, pp.292-306, 2001.

E. Buckingham, On physically similar systems; illustrations of the use of dimensional equations, Physical review, vol.4, issue.4, p.345, 1914.

M. Budinger, Preliminary design and sizing of actuation systems, Mémoire de HDR, 2014.
URL : https://hal.archives-ouvertes.fr/tel-01112448

M. Budinger, J. Liscouët, F. Hospital, and J. Maré, Estimation models for the preliminary design of electromechanical actuators, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol.226, issue.3, pp.243-259, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00712986

M. Budinger, J. Liscouet, F. Hospital, and B. Multon, Chaînes de transmission de puissance mécatroniques mise en place des modèles d'estimation pour la conception préliminaire, 2011.

M. Budinger, J. Passieux, C. Gogu, and A. Fraj, Scaling-law-based metamodels for the sizing of mechatronic systems, Mechatronics, vol.24, issue.7, pp.775-787, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00949210

M. Budinger, A. Reysset, T. E. Halabi, C. Vasiliu, and J. Mare, Optimal preliminary design of electromechanical actuators, Proceedings of the Institution of Mechanical Engineers, vol.228, issue.9, pp.1598-1616, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01856848

J. R. Bunch and J. E. Hopcroft, Triangular factorization and inversion by fast matrix multiplication, Mathematics of Computation, vol.28, issue.125, pp.231-236, 1974.

P. Bunus, Debugging and structural analysis of declarative equation-based languages, 2002.

W. Cao, B. C. Mecrow, G. J. Atkinson, J. W. Bennett, and D. J. Atkinson, Overview of electric motor technologies used for more electric aircraft (mea), IEEE transactions on industrial electronics, vol.59, issue.9, pp.3523-3531, 2012.

C. Carnevale and P. Resta, Vega electromechanical thrust vector control development, 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, p.5812, 2007.

A. Carty, An approach to multidisciplinary design, analysis & optimization for rapid conceptual design, 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, p.5438, 2002.

F. E. Cellier and H. Elmqvist, Automated formula manipulation supports object-oriented continuous-system modeling, IEEE Control Systems, vol.13, issue.2, pp.28-38, 1993.

I. Chakraborty, D. R. Trawick, D. Jackson, and D. Mavris, Electric control surface actuator design optimization and allocation for the more electric aircraft, Aviation Technology, Integration, and Operations Conference, p.4283, 2013.

G. A. Charier and F. Gallet, System of compact contra-rotating propellers, US Patent, vol.9, p.326, 2015.

A. Chattopadhyay, T. R. Mccarthy, and N. Pagaldipti, Multilevel decomposition procedure for efficient design optimization of helicopter rotor blades, AIAA journal, vol.33, issue.2, pp.223-230, 1995.

A. Chauvin, Contribution à l'optimisation globale pour le dimensionnement et la gestion d'énergie de véhicules hybrides électriques basée sur une approche combinatoire, 2015.

P. D. Ciampa and B. Nagel, The agile paradigm: the next generation of collaborative mdo, 18th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, p.4137, 2017.

C. Coïc, Model-Aided Design of a High-Performance Fly-by-Wire Actuator, Based on a Global Modelling of the Actuation System using Bond-graphs, 2016.

, Comsol multiphysics: Understand, predict, and optimize, COMSOL, 2018.

A. R. Conn, K. Scheinberg, and L. N. Vicente, Introduction to derivative-free optimization, vol.8, 2009.

M. Cooper, C. Lawson, Z. Shahneh, and A. , Simulating actuator energy consumption for trajectory optimisation, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, p.0954410017710271, 2017.

B. Daguse, Modélisation analytique pour le dimensionnement par optimisation d'une machine dédiée à une chaîne de traction hybride à dominante électrique, Supélec. References, 2013.

K. Deb, A. Pratap, S. Agarwal, and T. Meyarivan, A fast and elitist multiobjective genetic algorithm: Nsga-ii, IEEE transactions on evolutionary computation, vol.6, issue.2, pp.182-197, 2002.

S. Delannoy, A380 roll kinematics design. IFAC Proceedings Volumes, vol.40, pp.103-108, 2007.

S. Delannoy and T. Bertin, Method and device for piloting an aircraft about a piloting axis, US Patent, vol.8, p.824, 2012.

S. Delbecq, M. Budinger, I. Hazyuk, F. Sanchez, and J. Piaton, A framework for sizing embedded mechatronic systems during preliminary design, IFAC-PapersOnLine, vol.50, issue.1, pp.4354-4359, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02044401

S. Delbecq, M. Budinger, and J. Piaton, A more integrated design approach for embedded mechatronic systems: Application to electrical thrust reverser actuation systems, International Congress of the Aeronautical Sciences, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02065697

S. Delbecq, M. Budinger, J. Piaton, and B. Dagusé, Optimization of primary flight control actuation system using parametric sizing models of actuators, power electronics and structural analysis. Recent Advances in Aerospace Actuation Systems and Components, INSA Toulouse, pp.132-138, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02020963

S. Delbecq, F. Tajan, M. Budinger, J. Maré, and F. Sanchez, A framework for the conceptual and preliminary design of embedded mechatronic systems, International Workshop on aircraft System Technologies, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02042821

B. Delinchant, D. Duret, L. Estrabaut, L. Gerbaud, H. Nguyen-huu et al., An optimizer using the software component paradigm for the optimization of engineering systems. COMPEL-The international journal for computation and mathematics in electrical and electronic engineering, vol.26, pp.368-379, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00196729

B. Delinchant, F. Wurtz, D. Magot, and L. Gerbaud, A component-based framework for the composition of simulation software modeling electrical systems, Simulation, vol.80, issue.7-8, pp.347-356, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00334012

Y. ;. Denieul, . Institut-superieur-de-l'aeronautique, and . De-l'espace, Preliminary Design of Control Surfaces and Laws for Unconventional Aircraft Configurations, 2016.
URL : https://hal.archives-ouvertes.fr/tel-01482103

J. Derrien, P. Tieys, D. Senegas, and M. Todeschi, Ema aileron covadis development, 2011.

A. P. Deshmukh and J. T. Allison, Design of dynamic systems using surrogate models of derivative functions, Journal of Mechanical Design, vol.139, issue.10, p.101402, 2017.

A. Detwarasiti and R. D. Shachter, Influence diagrams for team decision analysis, Decision Analysis, vol.2, issue.4, pp.207-228, 2005.

R. Dieng, O. Corby, A. Giboin, R. , and M. , Methods and tools for corporate knowledge management, International journal of human-computer studies, vol.51, issue.3, pp.567-598, 1999.
URL : https://hal.archives-ouvertes.fr/inria-00073203

. Dill, dill python package: serialize all of python, 2018.

A. Dolan and J. Aldous, Networks and algorithms: an introductory approach, 1993.

S. Dols, Développement d'une nouvelle méthode de serrage intelligente pour le contrôle des assemblages boulonnés, 2016.

T. Doran, Ieee 1220: for practical systems engineering, Computer, vol.39, issue.5, pp.92-94, 2006.

D. W. Dudley, Dudley's gear handbook. Tata McGraw-Hill Education, 1991.

J. Ellson, E. Gansner, L. Koutsofios, S. C. North, and G. Woodhull, Graphviz-open source graph drawing tools, International Symposium on Graph Drawing, pp.483-484, 2001.

H. Elmqvist and M. Otter, Methods for tearing systems of equations in object-oriented modeling, Proceedings ESM, vol.94, pp.1-3, 1994.

T. Ersal, H. K. Fathy, D. G. Rideout, L. S. Louca, and J. L. Stein, A review of proper modeling techniques, Journal of Dynamic Systems, Measurement, and Control, vol.130, issue.6, p.61008, 2008.

J. A. Estefan, Survey of model-based systems engineering (mbse) methodologies, Incose MBSE Focus Group, vol.25, issue.8, pp.1-12, 2007.

R. Evans, A. Tsohou, T. Tryfonas, M. , and T. , Engineering secure systems with iso 26702 and 27001, System of Systems Engineering (SoSE), pp.1-6, 2010.

A. C. Faa, 25.1309-1a. System Design and Analysis, 1988.

A. Faisandier, Systems architecture and design, 2013.

M. Fervel, A. Lecanu, A. Maussion, and L. Andrieu, Flight control system for an aircraft, US Patent, vol.8, p.715, 2013.

A. Forrester and A. Keane, Engineering design via surrogate modelling: a practical guide, 2008.

M. Friedl, R. Scheidl, P. Hehenberger, A. Kellner, L. Weingartner et al., A design optimization framework for multidisciplinary mechatronic systems, Proceedings of TMCE, pp.3-12, 2016.

G. J. Friedman and C. T. Leondes, Constraint theory, part i: fundamentals, IEEE Transactions on Systems Science and Cybernetics, vol.5, issue.1, pp.48-56, 1969.

P. Fritzson, P. Aronsson, A. Pop, H. Lundvall, K. Nystrom et al., Openmodelica-a free open-source environment for system modeling, simulation, and teaching, IEEE International Conference on Control Applications, pp.1588-1595, 2006.

P. Fritzson and V. Engelson, Modelica-a unified object-oriented language for system modeling and simulation, European Conference on Object-Oriented Programming, pp.67-90, 1998.

Z. Gao and R. V. Grandhi, Sensitivity analysis and shape optimization for preform design in thermo-mechanical coupled analysis, International Journal for Numerical Methods in Engineering, vol.45, issue.10, pp.1349-1373, 1999.

I. Garrick, I. Reed, and W. H. , Historical development of aircraft flutter, Journal of Aircraft, vol.18, issue.11, pp.897-912, 1981.

M. L. Gasperi and N. Gollhardt, Heat transfer model for capacitor banks, Industry Applications Conference, 1998. Thirty-Third IAS Annual Meeting. The, vol.2, pp.1199-1204, 1998.

A. Gazaix, F. Gallard, V. Gachelin, T. Druot, S. Grihon et al., Towards the industrialization of new mdo methodologies and tools for aircraft design, 18th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, p.3149, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01685517

G. Gee, T. Vanthuyne, A. , and P. , An electrical thrust vector control system with dynamic force feedback. Recent Advances in Aerospace Actuation Systems and Components, INSA Toulouse, pp.75-79, 2007.

P. E. Gill, W. Murray, and M. A. Saunders, Snopt: An sqp algorithm for large-scale constrained optimization, SIAM review, vol.47, issue.1, pp.99-131, 2005.

X. Giraud, Méthodes et outils pour la conception optimale des réseaux de distribution d'électricité dans les aéronefs, 2014.

X. Giraud, M. Budinger, X. Roboam, H. Piquet, M. Sartor et al., Optimal design of the integrated modular power electronics cabinet, Aerospace Science and Technology, vol.48, pp.37-52, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01856869

S. Grand, M. Fervel, G. Balducci, and M. Wendling, Actuator control: A successful modular multi-application approach for actuation2015 and beyond. Recent Advances in Aerospace Actuation Systems and Components, INSA Toulouse, pp.60-65, 2016.

J. Gray, K. Moore, and B. Naylor, Openmdao: An open source framework for multidisciplinary analysis and optimization, 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, p.9101, 2010.

J. Gray, K. T. Moore, T. A. Hearn, and B. A. Naylor, Standard platform for benchmarking multidisciplinary design analysis and optimization architectures, AIAA journal, vol.51, issue.10, pp.2380-2394, 2013.

J. S. Gray, C. A. Mader, G. K. Kenway, and J. R. Martins, Modeling boundary layer ingestion using a coupled aeropropulsive analysis, Journal of Aircraft, pp.1-9, 2017.

A. Griewank and A. Walther, Evaluating derivatives: principles and techniques of algorithmic differentiation, vol.105, 2008.

J. Gross and S. Rudolph, Rule-based spacecraft design space exploration and sensitivity analysis, Aerospace Science and Technology, vol.59, pp.162-171, 2016.

B. Grossman, Z. Gurdal, R. Haftka, G. Strauch, and W. Eppard, Integrated aerodynamic/structural design of a sailplane wing, Journal of Aircraft, vol.25, issue.9, pp.855-860, 1988.

A. Hagberg, P. Swart, and D. Chult, Exploring network structure, dynamics, and function using networkx, 2008.

A. Hahn, Vehicle sketch pad: a parametric geometry modeler for conceptual aircraft design, 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, p.657, 2010.

M. Hammadi, A. Kellner, J. Choley, and P. Hehenberger, Mechatronic design optimization using multi-agent approach, 14th Mechatronics Forum International Conference, pp.310-317, 2014.

P. Hannifin, Parvex electrical motors, 2018.

N. Hansen, The cma evolution strategy: a comparing review, Towards a new evolutionary computation, pp.75-102, 2006.

I. Hazyuk, M. Budinger, F. Sanchez, and C. Gogu, Optimal design of computer experiments for surrogate models with dimensionless variables. Structural and Multidisciplinary Optimization, vol.56, pp.663-679, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01861801

P. Hehenberger, Advances in model-based mechatronic design, 2012.

P. Hehenberger and D. Bradley, Mechatronic Futures: Challenges and Solutions for Mechatronic Systems and their Designers, 2016.

P. Hehenberger, B. Vogel-heuser, D. Bradley, B. Eynard, T. Tomiyama et al., Design, modelling, simulation and integration of cyber physical systems: Methods and applications, Computers in Industry, vol.82, pp.273-289, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01995075

A. L. Herman and B. A. Conway, Direct optimization using collocation based on highorder gauss-lobatto quadrature rules, Journal of Guidance, Control, and Dynamics, vol.19, issue.3, pp.592-599, 1996.

J. Herman and W. Usher, Salib: an open-source python library for sensitivity analysis, The Journal of Open Source Software, vol.2, issue.9, 2017.

M. Hinze and S. Volkwein, Proper orthogonal decomposition surrogate models for nonlinear dynamical systems: Error estimates and suboptimal control, Dimension reduction of large-scale systems, pp.261-306, 2005.

R. Hooke and T. A. Jeeves, direct search"solution of numerical and statistical problems, Journal of the ACM (JACM), vol.8, issue.2, pp.212-229, 1961.

J. E. Hopcroft and R. M. Karp, An n?5/2 algorithm for maximum matchings in bipartite graphs, SIAM Journal on computing, vol.2, issue.4, pp.225-231, 1973.

F. Hospital, Conception préliminaire des actionneurs électromagnétiques basée sur les modèles: lois d'estimations et règles de conception pour la transmission de puissance mécanique, 2012.

F. Hospital, M. Budinger, A. Reysset, and J. Maré, Preliminary design of aerospace linear actuator housings. Aircraft Engineering and Aerospace Technology, An International Journal, vol.87, issue.3, pp.224-237, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01861797

E. Hussain, K. Atallah, M. Odavic, R. Dragan, C. et al., Pseudo direct drive electrical machines for flight control surface actuation, Power Electronics, Machines and Drives, pp.1-6, 2016.

J. T. Hwang, A modular approach to large-scale design optimization of aerospace systems, 2015.

J. T. Hwang and J. Martins, A computational architecture for coupling heterogeneous numerical models and computing coupled derivatives, ACM Transactions on Mathematical Software, 2017.

R. L. Iman, Latin hypercube sampling, Statistics Reference Online, 2008.

A. Inselberg and B. Dimsdale, Parallel coordinates for visualizing multi-dimensional geometry, Computer Graphics, pp.25-44, 1987.

G. James, D. Witten, T. Hastie, and R. Tibshirani, An introduction to statistical learning, vol.112, 2013.

S. C. Jensen, G. D. Jenney, D. , and D. , Flight test experience with an electromechanical actuator on the f-18 systems research aircraft, Digital Avionics Systems Conference, 2000. Proceedings. DASC. The 19th, vol.1, pp.2-3, 2000.

A. Jeyaraj and S. Liscouet-hanke, A model-based systems engineering approach for efficient flight control system architecture variants modelling in conceptual design. Recent Advances in Aerospace Actuation Systems and Components, INSA Toulouse, pp.34-41, 2018.

D. M. Judt and C. Lawson, Development of an automated aircraft subsystem architecture generation and analysis tool. Engineering Computations, vol.33, pp.1327-1352, 2016.

P. E. Kakosimos, A. G. Sarigiannidis, M. E. Beniakar, A. G. Kladas, and C. Gerada, Induction motors versus permanent-magnet actuators for aerospace applications, IEEE Transactions on Industrial Electronics, vol.61, issue.8, pp.4315-4325, 2014.

S. Kallas, M. Geoghegan-quinn, M. Darecki, C. Edelstenne, T. Enders et al., Flightpath 2050 europe's vision for aviation, Report of the High Level Group on Aviation Research, p.98, 2011.

S. J. Kapurch, NASA systems engineering handbook, 2010.

W. Karam, Générateurs de forces statiques et dynamiques à haute puissance en technologie électromécanique, 2007.

M. Kasper, Analysis and Multi-Objective Optimization of Multi-Cell DC/DC and AC/DC Converter Systems, 2016.

D. A. Keim, Visual exploration of large data sets, Communications of the ACM, vol.44, issue.8, pp.38-44, 2001.

G. Kenway, G. Kennedy, and J. Martins, Aerostructural optimization of the common research model configuration, 15th AIAA/ISSMO multidisciplinary analysis and optimization conference, p.3274, 2014.

C. Kessler, Active rotor control for helicopters: individual blade control and swashplateless rotor designs, CEAS Aeronautical Journal, p.23, 2011.

. Kisssoft, Kisssoft: Design software for mechanical engineering applications, 2018.

M. Kokkolaras, L. Louca, G. Delagrammatikas, N. Michelena, Z. Filipi et al., Simulation-based optimal design of heavy trucks by model-based decomposition: An extensive analytical target cascading case study, International Journal of Heavy Vehicle Systems, vol.11, issue.3-4, pp.403-433, 2004.

D. Kopala and C. Doell, High performance electromechanical actuation for primary flight surfaces (epad program results). Recent Advances in Aerospace Actuation Systems and Components, INSA Toulouse, pp.131-136, 2001.

D. Kraft, A software package for sequential quadratic programming. ForschungsberichtDeutsche Forschungs-und Versuchsanstalt fur Luft-und Raumfahrt, 1988.

I. Kroo, S. Altus, R. Braun, P. Gage, and I. Sobieski, Multidisciplinary optimization methods for aircraft preliminary design, 5th Symposium on Multidisciplinary Analysis and Optimization, p.4325, 1994.

P. Krus, Engineering design analysis and synthesis, 2008.

H. W. Kuhn and A. W. Tucker, Nonlinear programming. In Traces and emergence of nonlinear programming, pp.247-258, 2014.

A. B. Lambe and J. R. Martins, Extensions to the design structure matrix for the description of multidisciplinary design, analysis, and optimization processes. Structural and Multidisciplinary Optimization, vol.46, pp.273-284, 2012.

A. B. Lambe and J. R. Martins, Extensions to the design structure matrix for the description of multidisciplinary design, analysis, and optimization processes. Structural and Multidisciplinary Optimization, vol.46, pp.273-284, 2012.

T. Lefebvre, N. Bartoli, S. Dubreuil, M. Panzeri, R. Lombardi et al., Methodological enhancements in mdo process investigated in the agile european project, 18th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, p.4140, 2017.

J. Leonard, . Fort-belvoir, and . Va, Systems engineering fundamentals, 1999.

J. B. Leonard, A system look at actuation concepts and alternatives for primary flight control, 1985.

R. P. Liem, C. A. Mader, and J. R. Martins, Surrogate models and mixtures of experts in aerodynamic performance prediction for aircraft mission analysis, Aerospace Science and Technology, vol.43, pp.126-151, 2015.

J. Liscouet, Conception préliminaire des actionneurs électromécaniques: Approche hybride, directe/inverse, 2010.

J. Liscouët, J. Maré, and M. Budinger, An integrated methodology for the preliminary design of highly reliable electromechanical actuators: Search for architecture solutions, Aerospace Science and Technology, vol.22, issue.1, pp.9-18, 2012.

S. Liscouet-hanke, A model-based methodology for integrated preliminary sizing and analysis of aircraft power system architectures, 2008.

E. Livne, Aircraft active flutter suppression: State of the art and technology maturation needs, Journal of Aircraft, vol.55, issue.1, pp.410-452, 2017.

D. G. Luenberger and Y. Ye, Linear and nonlinear programming, vol.2, 1984.

D. Maclaurin, D. Duvenaud, and R. P. Adams, Autograd: Effortless gradients in numpy, ICML 2015 AutoML Workshop, 2015.

D. Malmquist, D. Frede, and J. Wikander, Holistic design methodology for mechatronic systems, Proceedings of the Institution of Mechanical Engineers, vol.228, pp.741-757, 2014.

B. Malone and M. Papay, Modelcenter: an integration environment for simulation based design, Simulation Interoperability Workshop, 1999.

B. Mansouri and J. Piaton, From characterisation to optimal flux-weakening control of permanent magnet synchronous motors (pmsms), 2017 IEEE 58th International Scientific Conference on, pp.1-7, 2017.

J. Maré, Aerospace Actuators 1: Needs, Reliability and Hydraulic Power Solutions. Number vol. 1 in Robotics series, 2016.

J. Maré, Requirement-based system-level simulation of mechanical transmissions with special consideration of friction, backlash and preload. Simulation Modelling Practice and Theory, vol.63, pp.58-82, 2016.

J. Mare, Aerospace Actuators: Signal-by-wire and Power-by-wire, vol.2, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02148719

J. Maré and M. Budinger, Comparative analysis of energy losses in servo-hydraulic, electro-hydrostatic and electro-mechanical actuators, The 11th Scandinavian International Conference on Fluid Power, vol.9, pp.2-4, 2009.

J. N. Martin, Systems engineering guidebook: A process for developing systems and products, vol.10, 1996.

J. Martins, A guide to the complex-step derivative approximation, 2003.

J. Martins, A short course on multidisciplinary design optimization, 2012.

J. R. Martins and J. T. Hwang, Review and unification of methods for computing derivatives of multidisciplinary computational models, AIAA journal, vol.51, issue.11, pp.2582-2599, 2013.

J. R. Martins and A. B. Lambe, Multidisciplinary design optimization: a survey of architectures, AIAA journal, vol.51, issue.9, pp.2049-2075, 2013.

J. R. Martins, P. Sturdza, A. , and J. J. , The complex-step derivative approximation, ACM Transactions on Mathematical Software (TOMS), vol.29, issue.3, pp.245-262, 2003.
URL : https://hal.archives-ouvertes.fr/hal-01483287

R. Maskrey and W. Thayer, A brief history of electrohydraulic servomechanisms, Moog Technical Bulletin, p.141, 1978.

P. Mathcad, Ptc mathcad: Engineering math software, 2018.

. Mathworks, Simscape: Model and simulate multidomain physical systems, 2018.

. Mathworks, Simulink: Simulation and model-based design, 2018.

C. Mcmahon, A. Lowe, and S. Culley, Knowledge management in engineering design: personalization and codification, Journal of Engineering Design, vol.15, issue.4, pp.307-325, 2004.

J. Meinadier, Ingénierie et intégration des systèmes, Hermes, 1998.

. Microsoft, Microsoft excel, 2016.

G. A. Miller, The magical number seven, plus or minus two: Some limits on our capacity for processing information, Psychological review, vol.63, issue.2, p.81, 1956.

. Mitcalc, Mitcalc: Mechanical, industrial and technical calculations, 2018.

J. Mo?kus, On bayesian methods for seeking the extremum, Optimization Techniques IFIP Technical Conference, pp.400-404, 1975.

A. Monsimer, Méthodologie pour l'étude conceptuelle d'un système fortement innovant --Application au cas du circuit carburant d'un moteur d'helicoptère, 2018.

A. Morentin-etayo, Methods and tools for the optimization of modular electrical power distribution cabinets in aeronautical applications, 2017.

J. A. Nelder and R. Mead, A simplex method for function minimization, The computer journal, vol.7, issue.4, pp.308-313, 1965.

J. Nocedal and S. J. Wright, Sequential quadratic programming, 2006.

L. Nordmann, F. Thielecke, P. Lucken, and M. Hamm, Virtual testing of aircraft hydraulic systems, Recent Advances in Aerospace Actuation Systems and Components, INSA Toulouse, pp.96-102, 2018.

M. F. Ozcan, I. Chakraborty, and D. N. Mavris, Impact of subsystem secondary power requirements on gas turbine sizing and performance, 16th AIAA Aviation Technology, Integration, and Operations Conference, p.3146, 2016.

M. O'brien, Boeing 777 thrust reverser actuation system, Aircraft Engineering and Aerospace Technology, vol.70, issue.5, pp.364-366, 1998.

P. Y. Papalambros and D. J. Wilde, Principles of optimal design: modeling and computation, 2000.

C. J. Paredis, A. Diaz-calderon, R. Sinha, and P. K. Khosla, Composable models for simulation-based design, Engineering with Computers, vol.17, issue.2, pp.112-128, 2001.

D. J. Pate, J. Gray, and B. J. German, A graph theoretic approach to problem formulation for multidisciplinary design analysis and optimization, Structural and Multidisciplinary Optimization, vol.49, pp.743-760, 2014.

F. Pedregosa, G. Varoquaux, A. Gramfort, V. Michel, B. Thirion et al., Scikit-learn: Machine learning in python, Journal of machine learning research, vol.12, pp.2825-2830, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00650905

O. Penas, R. Plateaux, J. Choley, H. Kadima, T. Sorinao et al., Conception mecatronique. Vers un processus continu de conception mecatronique integree, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01723835

O. Penas, R. Plateaux, S. Patalano, and M. Hammadi, Multi-scale approach from mechatronic to cyber-physical systems for the design of manufacturing systems, Computers in Industry, vol.86, pp.52-69, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01517427

J. Persson and J. Ölvander, Comparison of different uses of metamodels for robust design optimization, 51st AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, p.1039, 2013.

C. A. Perullo, J. C. Tai, and D. N. Mavris, Effects of advanced engine technology on open rotor cycle selection and performance, Journal of Engineering for Gas Turbines and Power, vol.135, issue.7, p.71204, 2013.

M. Pfennig and F. Thielecke, A knowledge-based approach for design and modelling of high lift actuation systems, Proceedings of the Institution of Mechanical Engineers, vol.225, issue.3, pp.302-311, 2011.

T. H. Pham and S. R. Hoole, Unconstrained optimization of coupled magnetothermal problems, IEEE transactions on Magnetics, vol.31, issue.3, pp.1988-1991, 1995.

J. Piaton, Electric motor braking system for rotolinear actuator, US Patent, vol.9, p.511, 2015.

M. J. Powell, A direct search optimization method that models the objective and constraint functions by linear interpolation, Advances in optimization and numerical analysis, pp.51-67, 1994.

D. Prieto, B. Dagusé, P. Dessante, P. Vidal, and J. Vannier, Effect of magnets on average torque and power factor of synchronous reluctance motors, XXth International Conference on, pp.213-219, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00804338

. Quora, Operating principle of a modern high-bypass jet engine thrust reverser, 2018.

W. Aeronautics and D. S. , Environmental conditions and test procedures for airborne equipment. Radio Technical Commission for Aeronautics, 1990.

F. Rahimi, L. Feng, J. Wikander, and D. Frede, Early phase design-optimization of mechatronic systems, Proceedings of the 2017 The 5th International Conference on Control, Mechatronics and Automation, pp.42-49, 2017.

A. Reul, L. Schwerdt, and S. Rinderknecht, Fast multidisciplinary design optimization in the development of mechatronic systems, ASME 2016 International Mechanical Engineering Congress and Exposition, pp.11-15, 2016.

A. Reysset, Conception préliminaire d'actionneurs électromécaniques-outils d'aide à la spécification et à la génération de procédures de dimensionnement pour l'optimisation, 2015.

A. Reysset, M. Budinger, and J. Maré, Computer-aided definition of sizing procedures and optimization problems of mechatronic systems, Concurrent Engineering, vol.23, issue.4, pp.320-332, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01861795

F. Richardeau, S. Vinnac, F. Mosser, A. Boestch, S. Chillon et al., First practical evaluation of a complete fail-safe and 100fault-tolerant inverter for critical load in aerospace application, Recent Advances in Aerospace Actuation Systems and Components, INSA Toulouse, pp.64-68, 2018.

D. Robbins, J. Bobalik, D. De-stena, N. Martin, K. Plag et al., , 2018.

, F-35 subsystems design, development & verification, Aviation Technology, Integration, and Operations Conference, p.3518, 2018.

J. L. Rogers, A knowledge-based tool for multilevel decomposition of a complex design problem, 1989.

R. Rohrschneider, J. Olds, R. Braun, V. Hutchinson, C. Kuhl et al., Flight system options for a long-duration mars airplane, AIAA 3rd" Unmanned Unlimited" Technical Conference, Workshop and Exhibit, p.6568, 2004.

F. Roos, Towards a methodology for integrated design of mechatronic servo systems, 2007.

F. Roos, H. Johansson, and J. Wikander, Optimal selection of motor and gearhead in mechatronic applications, Mechatronics, vol.16, issue.1, pp.63-72, 2006.

H. Rosenbrock, An automatic method for finding the greatest or least value of a function, The Computer Journal, vol.3, issue.3, pp.175-184, 1960.

M. H. Sadraey, Aircraft design: A systems engineering approach, 2012.

E. Safavi, M. Chaitanya, J. Ölvander, and P. Krus, Multidisciplinary optimization of aircraft actuation system for conceptual analysis, 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, p.282, 2013.

E. Safavi, M. Tarkian, H. Gavel, and J. Ölvander, Collaborative multidisciplinary design optimization: a framework applied on aircraft conceptual system design, Concurrent Engineering, vol.23, issue.3, pp.236-249, 2015.

A. Saltelli, P. Annoni, I. Azzini, F. Campolongo, M. Ratto et al., Variance based sensitivity analysis of model output. design and estimator for the total sensitivity index, Computer Physics Communications, vol.181, issue.2, pp.259-270, 2010.

F. Sanchez, Génération de modèles analytiques pour la conception préliminaire de systèmes multi-physiques: application à la thermique des actionneurs et des systèmes électriques embarqués, 2017.

F. Sanchez, M. Budinger, S. Delbecq, and I. Hazyuk, Modelling and design approaches for the preliminary design of power electronic converters, ELECTRIMACS, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02044400

F. Sanchez, M. Budinger, and I. Hazyuk, Dimensional analysis and surrogate models for the thermal modeling of multiphysics systems, Applied Thermal Engineering, vol.110, pp.758-771, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01856844

F. Sanchez and S. Delbecq, Surrogate modeling technique for the conceptual and preliminary design of embedded actuation systems and components, International Congress of the Aeronautical Sciences, 2016.

F. Sanchez, A. Koschlik, M. Budinger, and I. Hazyuk, Dimensional analysis and surrogate modelling technique for the sizing of actuation systems. Recent Advances in Aerospace Actuation Systems and Components, INSA Toulouse, pp.158-165, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02048651

R. Sellar, S. Batill, R. , and J. , Response surface based, concurrent subspace optimization for multidisciplinary system design, 34th Aerospace Sciences Meeting and Exhibit, p.714, 1996.

R. Seresinhe and C. Lawson, Electrical load-sizing methodology to aid conceptual and preliminary design of large commercial aircraft, Proceedings of the Institution of Mechanical Engineers, vol.229, pp.445-466, 2015.

M. A. Siddiqui and M. S. Haq, Review of thrust reverser mechanism used in turbofan jet engine aircraft, International Journal of Engineering, vol.6, issue.5, pp.717-726, 2013.

T. W. Simpson, J. Poplinski, P. N. Koch, A. , and J. K. , Metamodels for computerbased engineering design: survey and recommendations, Engineering with computers, vol.17, issue.2, pp.129-150, 2001.

J. Sobieszczanski-sobieski, Optimization by decomposition: a step from hierarchic to non-hierarchic systems, 1988.

M. Software, Patran: Complete fea modeling solution, 2018.

S. P. Software, Simcenter amesim: Integrated simulation platform for multi-domain mechatronic systems simulation, 2018.

F. Standard, Fmi: Functional mock-up interface, 2018.

B. Stanford, Optimal control surface layout for an aeroservoelastic wingbox, 58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, p.1813, 2017.

S. Bianchi and E. , The launchers and the vega programme and the launcher subsystems, 2005.

D. V. Steward, Partitioning and tearing systems of equations, Journal of the Society for Industrial and Applied Mathematics, Series B: Numerical Analysis, vol.2, issue.2, pp.345-365, 1965.

G. Stump, M. Yukish, J. Martin, and T. Simpson, The arl trade space visualizer: An engineering decision-making tool, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, p.4568, 2004.

. Sympy, Sympy python library, 2018.

D. Systemes, Abaqus: Unified fea, 2018.

D. Systemes, Dymola: Multi-engineering modeling and simulation based on modelica and fmi, 2018.

R. Tarjan, Depth-first search and linear graph algorithms, Switching and Automata Theory, pp.114-121, 1971.

R. Thareja and R. Haftka, Numerical difficulties associated with using equality constraints toachieve multi-level decomposition in structural optimization, 27th Structures, Structural Dynamics and Materials Conference, p.854, 1986.

J. Thauvin, Exploring the design space for a hybrid-electric regional aircraft with multidisciplinary design optimisation methods, 2018.

R. K. Tiedeman, Jam-tolerant rotary actuator, US Patent, vol.5, p.466, 1996.

M. Todeschi, Reliability of the electronics for actuation? Recent Advances in Aerospace Actuation Systems and Components, INSA Toulouse, pp.48-57, 2018.

M. Todeschi and F. Salas, Power electronics for the flight control actuators. Recent Advances in Aerospace Actuation Systems and Components, INSA Toulouse, pp.1-9, 2016.

B. Touré, J. Schanen, L. Gerbaud, T. Meynard, J. Roudet et al., , 2013.

, Emc modeling of drives for aircraft applications: Modeling process, emi filter optimization, and technological choice, IEEE Transactions on Power Electronics, vol.28, issue.3, pp.1145-1156

D. Van-den-bossche, The a380 flight control electrohydrostatic actuators, achievements and lessons learnt, 25th international congress of the aeronautical sciences, pp.1-8, 2006.

A. Van-der-velden, B. Wujek, and P. Koch, isight-fd: A tool for multi-objective data analysis, 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, p.5988, 2008.

N. Van-huynh and P. J. Mccormick, Electronically controlled rotary actuator for an aircraft control surface, p.963, 2018.

T. Vanthuyne, An electrical thrust vector control system for the vega launcher, Proceeding of 13th European Space Mechanisms and Tribology Symposium, pp.23-25, 2009.

D. D. Walden, G. J. Roedler, K. Forsberg, R. D. Hamelin, and T. M. Shortell, Systems engineering handbook: A guide for system life cycle processes and activities, 2015.

G. G. Wang and S. Shan, Review of metamodeling techniques in support of engineering design optimization, Journal of Mechanical design, vol.129, issue.4, pp.370-380, 2007.

L. Wang, Force equalization for active/active redundant actuation system involving servo-hydraulic and electro-mechanical technologies, 2012.

X. Wang, E. Bibeau, and G. Naterer, Experimental correlation of forced convection heat transfer from a naca airfoil, Experimental Thermal and Fluid Science, vol.31, issue.8, pp.1073-1082, 2007.

J. Welstead and J. L. Felder, Conceptual design of a single-aisle turboelectric commercial transport with fuselage boundary layer ingestion, 54th AIAA Aerospace Sciences Meeting, p.1027, 2016.

X. Yan, M. Qiao, J. Li, T. W. Simpson, G. M. Stump et al., A workcentered visual analytics model to support engineering design with interactive visualization and data-mining, 45th Hawaii International Conference on, pp.1845-1854, 2012.

X. Yang, Nature-inspired metaheuristic algorithms, 2010.

E. Zatloff, Spoiler and flap rotary em actuation (rema) implementation on a recently certified business jet. Recent Advances in Aerospace Actuation Systems and Components, INSA Toulouse, pp.15-23, 2018.