S. Chen, S. Zhang, J. T. Zhao, and G. , Synthesis and characterization of novel covalently linked waterborne polyurethane/Fe3O4 nanocomposite films with superior magnetic, conductive properties and high latex storage stability, Chem Eng J, vol.286, pp.249-258, 2016.

M. Malik and R. Kaur, Mechanical and Thermal Properties of Castor Oil-Based Polyurethane Adhesive: Effect of TiO2 Filler, Adv Polym Technol, vol.37, pp.24-30, 2018.

M. Yousfi, S. Livi, A. Dumas, L. Roux, C. Crépin-leblond et al., Use of new synthetic talc as reinforcing nanofillers for polypropylene and polyamide 6 systems: Thermal and mechanical properties, J Coll Interf Sci, vol.403, pp.29-42, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00820409

A. Dumas, F. Martin, E. Ferrage, P. Micoud, L. Roux et al., Synthetic talc advances: Coming closer to nature, added value, and industrial requirements, Appl Clay Sci, vol.85, pp.8-18, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00966388

G. Dias, M. Prado, and C. Carone, Synthetic silico-metallic mineral particles (SSMMP) as nanofillers: comparing the effect of different hydrothermal treatments on the PU/SSMMP nanocomposites properties, Polym Bull, vol.72, p.2991, 2015.

M. Prado, G. Dias, C. Carone, R. Ligabue, A. Dumas et al., Synthetic Ni-talc as filler for producing polyurethane nanocomposites, 22 -dos, vol.132, pp.38-49, 2015.

G. Dias, M. Prado, R. Ligabue, M. Poirier, L. Roux et al., Synthetic talc as a new platform for producing fluorescent clay polyurethane nanocomposites, Appl Clay Sci, vol.158, pp.37-45, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02059170

G. Dias, M. Prado, R. Ligabue, M. Poirier, L. Roux et al., Hybrid Pu/Synthetic Talc/Organic Clay Ternary Nanocomposites: Thermal, Mechanical and Morphological Properties, Polym Polym Comp, vol.26, pp.127-140, 2018.

M. Yousfi, S. Livi, A. Dumas, J. Crépin-leblond, M. Greenhill-hooper et al., Compatibilization of polypropylene/polyamide 6 blends using new synthetic nanosized talc fillers: Morphology, thermal, and mechanical properties, J Appl Polym Sci, vol.131, p.40453, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01087526

M. Yousfi, S. Livi, A. Dumas, J. Crépin-leblond, M. Greenhill-hooper et al., Ionic compatibilization of polypropylene/ polyamide 6 blends using an ionic liquids/nanotalc filler combination: morphology, thermal and mechanical properties, RSC Adv, vol.5, p.46197, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01174204

Q. Beuguel, J. Ville, J. Crepin-leblond, P. Mederic, and A. T. , Comparative study of the structural and rheological properties of PA6 and PA12 based synthetic talc nanocomposites, Polym, vol.62, pp.109-117, 2015.

,

. Hemlata and S. Maiti, Mechanical, morphological, and thermal properties of nanotalc reinforced PA6/SEBS-g-MA composites, J Appl Polym Sci, vol.132, p.41381, 2014.

G. Dias, M. Prado, L. Roux, C. Poirier, M. Micoud et al., Waterborne polyurethane/Fe3O4-synthetic talc composites: synthesis, characterization, and magnetic properties, -dos, vol.135, p.46107, 1915.

I. Fernandes, M. Costa, M. Ferreira, and M. Barreiro, Waterbased poly(urethane-urea) dispersions -meeting the European Union legislation, Polymery, vol.60, pp.536-540, 2015.

L. Roux, C. Martin, F. Micoud, P. Dumas, and A. , Process for Preparing a Composition Comprising Synthetic Mineral Particles and Composition, 2013.

M. Zhang, Q. Hui, X. Lou, S. Redfern, E. Salje et al., , 2006.

, Dehydroxylation, proton migration, and structural changes in heated talc: An infrared spectroscopic study, vol.91, pp.816-825

F. Martin, P. Micoud, L. Delmotte, C. Marichal, R. Dred et al., The Structural Formula of Talc from the Trimouns Deposit, vol.37, p.997, 1999.

S. Ray and M. Okamoto, Polymer/layered silicate nanocomposites: a review from preparation to processing, Prog Polym Sci, vol.28, pp.1539-1641, 2003.

D. Paul and L. Robeson, Polymer nanotechnology: Nanocomposites. Polym, vol.49, pp.3187-3204, 2008.

S. -hajializadeh, M. Barikani, and S. Bellah, Synthesis and characterization of multiwall carbon nanotube/waterborne polyurethane nanocomposites, Polym Int, vol.66, pp.1074-1083, 2017.

L. Castillo, S. Barbosa, and N. Capiati, Influence of talc morphology on the mechanical properties of talc filled polypropylene, J Polym Res, vol.20, p.152, 2013.

W. Han, Synthesis and Properties of Networking Waterborne Polyurethane/Silica Nanocomposites by Addition of Poly(ester amine) Dendrimer, Polym Compos, vol.34, p.156, 2013.

A. Dumas, F. Martin, L. Roux, and C. , Phyllosilicates synthesis: a way of accessing edges contributions in NMR and FTIR spectroscopies, Phys Chem Minerals, vol.40, p.361, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00843736

A. -romo-uribe, K. Santiago-santiago, G. Zavala-padilla, R. , A. Calixtorodriguez et al., Waterborne layered, 2016.

R. Bibliográficas,

J. Akyndoyo, Polyurethane types, synthesis and applications -a review, pp.114453-114482, 2016.

M. Alexandre and P. Dubois, Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials, Materials Science and Engineering, v, vol.28, pp.1-63, 2000.

E. Bajsic, . G;-rek, and O. B. Pavic, The influence of talc content on the thermal and mechanical properties of thermoplastic polyurethane/ polypropylene blends, Journal of Elastomers & Plastics, v, vol.45, pp.501-522, 2012.

A. Barni and M. Levi, Aqueous polyurethane dispersions: a comparative study of polymerization processes, Journal of Applied Polymer Science, vol.88, pp.716-723, 2003.

Q. Beuguel, Comparative study of the structural and rheological properties of PA6 and PA12 based synthetic talc nanocomposites. Polymer, v. 62, pp.109-117, 2015.

Q. Beuguel, Influence of clay mineral structure and polyamide polarity on the structural and morphological properties of clay polypropylene/ polyamide nanocomposites, Applied Clay Science, vol.135, pp.253-259, 2017.

X. Cao, Y. Habibi, and L. A. Lucia, One-pot polymerization, surface grafting, and processing of waterborne polyurethane-cellulose nanocrystal nanocomposites, Journal of Materials Chemistry, vol.19, pp.7137-7145, 2009.

S. E. Castillo-l.-a;-barbosa,

N. J. Capiati, Influence of talc morphology on the mechanical properties of talc filled polypropylene, Journal of Polymer Research, p.20, 2013.

L. Castillo, Thermoplastic starch films reinforced with talc nanoparticles. Carbohydrate Polymers, v. 95, pp.664-674, 2013.

K. Chabrol, Functionalization of synthetic talc-like phyllosilicates by alkoxyorganosilane grafting, Journal of Materials Chemistry, v, vol.20, pp.9695-9706, 2010.

K. V. Chattopadhyay-d.-k;-raju, Structural engineering of polyurethane coatings for high performance applications. Progress in Polymer Science, vol.32, pp.352-418, 2007.

M. Claverie, Synthetic talc and talc-like structures: preparation, features and applications, Chemistry A European Journal, v, vol.24, pp.519-542, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01686526

A. Cornille, A perspective approach to sustainable routes for nonisocyanate polyurethanes, European Polymer Journal, vol.87, pp.353-552, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01464067

S. Czlonka, Linseed oil as a natural modifier of rigid polyurethane foams. Industrial Crops & Products, v. 115, pp.40-51, 2018.

G. Dias, Comparing different synthetic talc as fillers for polyurethane nanocomposites, Macromolecular Symposia, v, vol.367, pp.136-142, 2016.

G. Dias, Synthetic silico-metallic mineral particles (SSMMP) as nanofillers: comparing the effect of different hydrothermal treatments on the PU/SSMMP nanocomposites properties, Polymer Bulletin, vol.72, pp.2991-3006, 2015.

. Dos and L. Santos, New magnetic nanocomposites: Polyurethane/ Fe3O4-synthetic talc, European Polymer Journal, v, vol.69, pp.38-49, 2015.
URL : https://hal.archives-ouvertes.fr/hal-02117141

. Dos and L. Santos, Waterborne polyurethane/Fe3O4-synthetic talc composites: synthesis, characterization, and magnetic properties, Polymer Bulletin, vol.75, pp.1915-1930, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02118415

A. Dumas, Synthetic talc advances: Coming closer to nature, added value, and industrial requirements, Applied Clay Science, v, vol.85, pp.8-18, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00966388

B. Fiorentino, Chemical modification routes of synthetic talc: Influence on its nucleating power and on its dispersion state, Applied Clay Science, pp.107-118, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01155088

X. Gao, Preparation and characterization of well-dispersed waterborne polyurethane/CaCO3 nanocomposites, Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol.377, pp.312-317, 2011.

T. Gurunathan, S. Mohantya, and S. K. Nayakab, Effect of reactive organoclay on physicochemical properties of vegetable oil-based waterborne polyurethane nanocomposites, pp.11524-11533, 2015.

C. Heck, J. H. Santos, and C. R. Wolf, Waterborne polyurethane: the effect of the addition or in situ formation of silica on mechanical properties and adhesion, International Journal of Adhesion & Adhesives, v, vol.58, pp.13-20, 2015.

H. Jin, J. ;-wie, and S. C. Kim, Effect of organoclays on the properties of polyurethane/ clay nanocomposite coatings, Journal of Applied Polymer Science, vol.117, pp.2090-2100, 2010.

A. Kaushik, . Ahuja, and V. Salwani, Synthesis and characterization of organically modified clay/castor oil based chain extended polyurethane nanocomposites

, Composites Part A: Applied Science and Manufacturing, vol.42, pp.1534-1541, 2011.

I. Khudyakov, D. Zopf, N. J. Turro, and . Nanocomposites,

, Designed Monomers and Polymers, vol.12, pp.279-290, 2009.

B. Kim, Aqueous polyurethane dispersions. Colloid & Polymer Science, v. 274, pp.599-611, 1996.

P. Laflamme, A. Beaudoin, T. ;-chapaton, C. Spino, and A. Soldera, Simulated infrared spectra of triflic acid during proton dissociation, Journal of Computational Chemistry, vol.33, pp.1190-1196, 2012.

H. Lee,

J. Hwang,

H. Liu, Effects of ionic interactions between clay and waterborne polyurethanes on the structure and physical properties of their nanocomposite dispersions, Journal of Polymer Science: Part A: Polymer Chemistry, vol.44, pp.5801-5807, 2006.

S. G. Lei, S. Hoa, and M. V;-ton-that, Effect of clay types on the processing and properties of polypropylene nanocomposites, Composites Science and Technology, vol.66, pp.1274-1279, 2006.

P. K. Maji and A. K. Bhowmick, Efficacy of clay content and microstructure of curing agents on the structure-property relationship of new-generation polyurethane nanocomposites, Polymer Advanced Technology, issue.23, pp.1311-1320, 2012.

. Moreira and . Santos,

, Aromáticos/TiO2 por polimerização in situ

Q. Nguyen and D. Baird, Preparation of polymer-clay nanocomposites and their properties, vol.25, pp.270-285, 2006.

A. Noreen, Recent trends in environmentally friendly water-borne polyurethane coatings: A review, Korean Journal of Chemical Engineering, vol.33, pp.388-400, 2016.

S. D. Pavlidou and C. D. Papaspyrides, A review on polymer-layered silicate nanocomposites. Progress in Polymer Science, vol.33, pp.1119-1198, 2008.

P. Pokharel, . Choi, and D. S. Lee, The effect of hard segment length on the thermal and mechanical properties of polyurethane/graphene oxide nanocomposites, Composites: Part A, vol.69, pp.168-177, 2015.

M. Prado, Synthetic Ni-talc as filler for producing polyurethane nanocomposites, Journal of Applied Polymer Science, 2015.

S. Ray and M. Okamoto, Polymer/layered silicate nanocomposites: a review from preparation to processing, Progress in Polymer Science, v, vol.28, pp.1539-1641, 2003.

C. Saha and T. Chaki,

N. K. Singha, Synthesis and characterization of elastomeric polyurethane and PU/clay Nanocomposites based on an aliphatic diisocyanate, Journal of Applied Polymer Science, vol.130, pp.3328-3334, 2013.

N. Salahuddin, Synthesis and characterization of polyurethane/organomontmorillonite nanocomposites, Applied Clay Science, vol.47, pp.242-248, 2010.

R. Sattar, . Kausar, and M. Siddiq, Advances in thermoplastic polyurethane composites reinforced with carbon nanotubes and carbon nanofibers: A review, Journal of Plastic Film & Sheeting, v, vol.31, pp.186-224, 2015.

M. Song, High performance nanocomposites of polyurethane elastomer and organically modified layered silicate, Journal of Applied Polymer Science, pp.3239-3243, 2003.

. Tan and N. L. Thomas, A review of the water barrier properties of polymer/clay and polymer/graphene nanocomposites, Journal of Membrane Science, vol.514, pp.595-612, 2016.

J. Wang and P. Somasundaran, Study of galactomannose interaction with solids using AFM, IR and allied techniques, Journal of Colloid and Interface Science, vol.309, pp.373-383, 2007.

K. Wang, Effect of talc content on the degradation of re-extruded polypropylene/talc composites, vol.98, pp.1275-1286, 2013.

W. Wang, Y. Guo, and J. U. ;-otaigbe, Synthesis and characterization of novel biodegradable and biocompatible poly(ester-urethane) thin films prepared by homogeneous solution polymerization. Polymer, v. 49, pp.4393-4398, 2008.

S. Yamasaki, Industrial synthetic methods for rubbers. 8. Polyurethane elastomers. International Polymer Science and Technology, pp.29-35, 2016.

H. Yang, Preparation of porous material from talc by mechanochemical treatment and subsequent leaching, Applied Clay Science, v, vol.31, pp.290-297, 2006.

M. Yousfi, Compatibilization of polypropylene/polyamide 6 blends using new synthetic nanosized talc fillers: morphology, thermal, and mechanical properties, Journal of Applied Polymer Science, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00932810

M. Yousfi, Use of new synthetic talc as reinforcing nanofillers for polypropylene and polyamide 6 systems: thermal and mechanical properties, Journal of Colloid and Interface Science, issue.403, pp.29-42, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00820409

M. Yousfi, Ionic compatibilization of polypropylene/ polyamide 6 blends using an ionic liquids/nanotalc filler combination: morphology, thermal and mechanical properties, pp.46197-46205, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01174204

F. Yu, Effects of talc on the mechanical and thermal properties of polylactide, Journal of Applied Polymer Science, vol.125, pp.99-109, 2012.

Q. Zhang, In situ miniemulsion polymerization for waterborne polyurethanes: Kinetics and modeling of interfacial hydrolysis of isocyanate, Colloids and Surfaces A: Physicochemical Engineering Aspects, vol.393, pp.17-26, 2012.

S. Zhang, Synthesis and characterization of novel waterborne polyurethane nanocomposites with magnetic and electrical properties, Composites: Part A, vol.55, pp.94-101, 2013.

X. Zhang, The synthesis and characterization of polyurethane/clay nanocomposites, Polymer International, vol.52, pp.790-794, 2003.

G. Zhao, T. Wanga, and Q. Wanga, Studies on wettability, mechanical and tribological properties of the polyurethane composites filled with talc, Applied Surface Science, vol.258, pp.3557-3564, 2012.

X. Zhou, Recent advances in synthesis of waterborne polyurethane and their application in water-based ink: a review, Journal of Materials Science & Technology, v, vol.31, pp.708-722, 2015.

K. Zia and H. Bhatti,

I. A. Bhatti, Methods for polyurethane and polyurethane composites, recycling and recovery: A review, Reactive & Functional Polymers, vol.67, pp.675-692, 2007.

H. Zou, S. Wu, and J. Shen, Polymer/silica nanocomposites: preparation, characterization, properties, and applications, Chemical Reviews, vol.108, pp.3893-3957, 2008.