R. Yahyaoui, A. Bernardinis, A. Gaillard, and D. Hissel, Switch short-circuit fault detection algorithm based on drain-to-source voltage monitoring for a fault tolerant DC/DC converter, IECON, pp.2212-2217, 2016.

R. Yahyaoui, A. Gaillard, A. Bernardinis, and D. Hissel, Signal processing-based switch fault detection methods for multi-phase interleaved boost converter, Vehicle Power and Propulsion Conference (VPPC), pp.11-14, 2017.

R. Yahyaoui, A. Bernardinis, A. Gaillard, and D. Hissel, Tolérance aux défauts de type court-circuit d 'interrupteurs de puissance en SiC utilisés dans un convertisseur DC-DC entrelacé, p.1361543, 2016.

, Bibliographie 162

. Bibliographie,

Q. Li, L. Ma, G. Zhou, Z. Liu, and W. Chen, Active control strategy based on vectorproportion integration controller for proton exchange membrane fuel cell grid-connected system, IET Renew. Power Gener, vol.9, issue.8, pp.991-999, 2015.

P. Thounthong, B. Davat, S. Rael, and P. Sethakul, Fuel cell high-power applications, IEEE Industrial Electronics Magazine, vol.3, pp.32-46, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01761054

S. Samuelsen, The automotive future belongs to fuel cells range, adaptability, and refueling time will ultimately put hydrogen fuel cells ahead of batteries, IEEE Spectrum, vol.54, issue.2, pp.38-43, 2017.

T. Yoneyama, T. Yamamoto, K. Kondo, T. Furuya, and K. Ogawa, Fuel cell powered railway vehicle and experimental test results, 2007 European Conference on Power Electronics and Applications, pp.1-10, 2007.

G. Renouard-vallet, M. Saballus, J. Schumann, J. Kallo, K. A. Friedrich et al., Fuel cells for civil aircraft applications, vol.30, pp.271-280, 2011.

I. V. Exposito, Interfaçage et contrôle commande de piles à combustible pour applications stationnaires et transport, 2004.

S. Khwan-on, L. De-lillo, L. Empringham, and P. Wheeler, Fault-Tolerant Matrix Converter Motor Drives With Fault Detection of Open Switch Faults, IEEE Transactions on Industrial Electronics, vol.59, issue.1, pp.257-268, 2012.

. Honda-motor-co, The FCX powertrain -an unwavering dedication to cleanliness, performance, and efficiency

J. Kurtz, ;. Pi), S. Sprik, C. Ainscough, G. Saur et al., Advanced Automotive Battery Conference, 2016.

Y. Bréelle, O. Bloch, P. Degobert, and M. Prigent, Principes, technologie, applications des piles à combustible, 2000.

R. Yeetsorn, M. W. Fowler, and C. Tzoganakis, A review of thermoplastic composites for bipolar plate materials in PEM fuel cells, 2011.

I. Sadli, Modélisation par Impédance d'une pile a combustible PEM pour utilisation en électronique de puissance, 2006.

H. Wang, X. Yuan, and H. Li, PEM fuel cell diagnostic tools, 2012.

Y. Mekonnen, A. Sundararajan, and A. I. Sarwat, A Review of Cathode and Anode Materials for Lithium-Ion Batteries, Southeast Conference, pp.1-6, 2016.

O. Gross and J. Swoyer, The Next Step in Low Cost Lithium-Ion Polymer Systems, Seventeenth Annual Battery Conference on Applications and Advances, pp.135-139, 2002.

A. Bernardinis, D. Candusso, F. Harel, and G. Coquery, Power electronics interface for an hybrid PEMFC generating system with fault management strategies for transportation, 13th European Conference on Power Electronics and Applications, pp.1-10, 2009.

D. Candusso, A. De-bernardinis, M. C. Péra, F. Harel, X. François et al., Fuel cell operation under degraded working modes and study of a diode by-pass circuit dedicated to multi-stack association¸Energy Conversion and Management, vol.49, pp.880-895, 2008.

A. Narjiss, D. Depernet, F. Gustin, and D. Hissel, High frequency power converter for Fuel Cell stacks parallel association, Vehicle Power and Propulsion Conference, pp.1-4, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00335534

M. Phattanasak, Etude, modélisation, et mise en oeuvre de convertisseurs DC-DC isolés multiport et modulaires," thèse de doctorat en génie électrique, 2012.

A. Kolli, A. Gaillard, A. Bernardinis, O. Bethoux, D. Hissel et al., A review on DC/DC converter architectures for power fuel cell applications, Energy Convers. Manag, vol.105, pp.716-730, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01271001

M. Kabalo, B. Blunier, D. Bouquain, and A. Miraoui, State-of-the-art of DC-DC converters for fuel cell vehicles, Vehicle Power and Propulsion Conf, pp.1-6, 2010.

A. S. Samosir, M. Anwari, and A. H. Yatim, Dynamic evolution control interleaved boost dc-dc converter for fuel cell application, IPEC, pp.869-874, 2010.

N. Bouhalli, Etude et intégration de convertisseurs multicellulaires parallèles entrelacés et magnétiquement couplés, 2009.

O. Hegazy, J. V. Mierlo, and P. Lataire, Analysis, modeling and implementation of multidevice interleaved DC/DC converter for fuel cell hybrid vehicles, IEEE Transactions on Power Electronics, vol.27, issue.11, pp.4445-4458, 2012.

M. Khosroshahi, M. Abapour, and . Sabahi, Reliability Evaluation of Conventional and Interleaved DC-DC Boost Converters, IEEE Transactions on Power Electronics, vol.30, issue.10, pp.5821-5828, 2015.

P. Magne, P. Liu, B. Bilgin, and A. Emadi, Investigation of impact of number of phases in interleaved dc-dc boost converter, IEEE Transportation Electrification Conference and Expo (ITEC), pp.1-6, 2015.

Y. Tsuruta and A. , A Novel Soft Switching Scheme QRAS Converter Aimed for FCEV, pp.779-785, 2005.

D. Guilbert, A. N'diaye, A. Gaillard, and A. Djerdir, Fuel cell systems reliability enhancement by developing a fast and efficient power switch open-circuit fault detection algorithm interleaved DC/DC boost converter topologies, International Journal of hydrogen energy, vol.41, issue.34, pp.15505-15517, 2016.

W. Subsingha and P. Sarakarn, 4 phase interleaved DC boost converter for PEMFC applications, Procedia Engineering, vol.32, pp.1127-1161, 2012.

B. Huang, Convertisseur continu-continu à rapport de transformation élevé pour applications pile à combustible, 2009.

P. Siffert and E. Krimmel, Silicon: Evolution and future of a technology, 2004.

R. Browna, Novel AlGaN/GaN based enhancement mode high electron mobility transistor with sub-critical barrier, 2015.

C. Bailey, P. Rajaguru, and H. Lu, Impact of wide band gap devices on power electronics packaging designs, Pan Pacific Microelectronics Symposium, pp.1-6, 2017.

L. Scheick, Gallium Nitride -Worth the Hype, JPL/OSMS Assurance Technology Program Office (ATPO), NASA, vol.4, issue.2, 2012.

N. Videau, Convertisseurs continu-continu non isolés à haut rapport de conversion pour Pile à Combustible et Electrolyseurs-Apport des composants GaN, 2014.

T. Chailloux, C. Calvez, D. Planson, and D. Tournier, Etude de differents transistors de puissance SiC 1.2kV des temperatures cryogeniques aux hautes temperatures, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01065281

A. Castellazzi, T. Funaki, T. Kimoto, and T. Hikihara, Short-circuit tests on SiC power MOSFETs, Proc. IEEE 10th Int. Conf. Power Electron. Drive Syst, pp.1297-1300, 2013.

J. Biela, M. Schweizer, S. Waffler, and J. W. Kolar, SiC versus Si-Evaluation of Potentials for Performance Improvement of Inverter and DC-DC Converter Systems by SiC Power Semiconductors, IEEE Transactions on Industrial Electronics, vol.58, issue.7, pp.2872-2882, 2011.

H. Al-sheikh, O. Bennouna, G. Hoblos, and N. Moubayed, Study on Power Converters used in Hybrid Vehicles with Monitoring and Dioagnosis Techniques, pp.103-107, 2014.

, Datasheet du semi-conducteur, vol.120, issue.12

E. P. Eni, S. B?czkowski, S. Munk-nielsen, T. Kerekes, and R. Teodorescu, Shortcircuit characterization of 10 kV 10A 4H-SiC MOSFET, IEEE Applied Power Electronics Conference and Exposition, pp.974-978, 2016.

R. Green, D. P. Urciuoli, and A. J. Lelis, Short-Circuit Robustness Testing of SiC MOSFETs, European Conference on Silicon Carbide Related Materials (ECSCRM), pp.1-1, 2016.

L. Yu, S. Araujo, D. Pappis, and P. Zacharias, Short-circuit capability: benchmarking SiC and GaN devices with Si-based technologies, pp.1-5, 2015.

N. Badawi, A. E. Awwad, and S. Dieckerhoff, Robustness in Short-Circuit Mode: Benchmarking of 600V GaN HEMTs with Power Si and SiC MOSFETs, IEEE Energy Conversion Congress and Exposition, pp.1-7, 2016.

D. P. Sadik, J. Colmenares, G. Tolstoy, D. Peftitsis, M. Bakowski et al., Short-Circuit Protection Circuits for Silicon-Carbide Power Transistors, IEEE Transactions on Industrial Electronics, vol.63, issue.4, 1995.

X. Huang, G. Wang, Y. Li, A. Q. Huang, and B. J. Baliga, Short-Circuit Capability of 1200V SiC MOSFET and JFET for Fault Protection, Applied Power Electronics Conference and Exposition, pp.197-200, 2013.

T. T. Nguyen, A. Ahmed, T. V. Thang, and J. H. Park, Gate Oxide Reliability Issues of SiC MOSFETs Under Short-Circuit Operation, IEEE Transactions on Power Electronics, vol.30, issue.5, pp.2445-2455, 2015.

A. E. Awwad and S. Dieckerhoff, Short-Circuit Evaluation and Overcurrent Protection for SiC Power MOSFETs, European Conference on Power Electronics and Applications (EPE'15 ECCE-Europe, pp.1-9, 2015.

J. Sun, H. Xu, X. Wu, and K. Sheng, Comparison and Analysis of Short Circuit Capability of 1200V Single-Chip SiC MOSFET and Si IGBT, 13th China International Forum on Solid State Lighting: International Forum on Wide Bandgap Semiconductors China (SSLChina: IFWS), 2016.

E. P. Eni, S. Beczkowski, S. Munk-nielsen, T. Kerekes, R. Teodorescu et al., Short-Circuit Degradation of 10Kv 10A SiC MOSFET, IEEE Transactions, 2017.

R. Singh, B. Grummel, and S. Sundaresan, Short circuit robustness of 1200 V SiC switches, IEEE 3rd Workshop on Wide Bandgap Power Devices and Applications (WiPDA), pp.1-4, 2015.

J. Balcells and P. Bogónez-franco, Effect of driver to gate coupling circuits on EMI produced by SiC MOSFETS, International Symposium on Electromagnetic Compatibility, pp.209-214, 2013.

A. Tripathi, K. Mainali, S. Madhusoodhanan, A. Yadav, K. Vechalapu et al.,

. Bhattacharya, A MV intelligent gate driver for 15kV SiC IGBT and 10kV SiC MOSFET, IEEE Applied Power Electronics Conference and Exposition, pp.2076-2082, 2016.

D. Sadik, J. Colmenares, G. Tolstoy, D. Peftitsis, M. Bakowski et al., Short-Circuit Protection Circuits for Silicon-Carbide Power Transistors, IEEE Trans. Ind. Electron, vol.63, issue.4, 1995.

J. Wang, Z. Shen, C. Dimarino, R. Burgos, and D. Boroyevich, Gate driver design for 1.7kV SiC MOSFET module with Rogowski current sensor for shortcircuit protection, IEEE Applied Power Electronics Conference and Exposition, pp.516-523, 2016.

J. Wang, Z. Shen, R. Burgos, and D. Boroyevich, Design of a high-bandwidth Rogowski current sensor for gate-drive shortcircuit protection of 1.7 kV SiC MOSFET power modules, IEEE 3rd Workshop on Wide Bandgap Power Devices and Applications (WiPDA), pp.104-107, 2015.

K. Fink, A. Volke, and P. I. Gmbh, Gate-Driver with Full Protection for SiC-MOSFET Modules Gate Driver for FMF800DX-24A, pp.28-30, 2016.

G. Königsmann, R. Herzer, S. Buetow, and M. Rossberg, International Exhibition and Conference for Power Electronics, Intelligent Motion, pp.1-7, 2016.

J. Balcells, J. Mon, M. Lamich, and A. Laguna, Improvement of driver to gate coupling circuits for SiC MOSFETS, IEEE Int. Symp. Ind. Electron, pp.521-525, 2014.

F. Mo, J. Furuta, and K. Kobayashi, A Low Surge Voltage and Fast Speed Gate Driver for SiC MOSFET with Switched Capacitor Circuit, WiPDA, pp.282-285, 2016.

D. Guilbert, Tolérance aux défauts et optimisation des convertisseurs DC/DC pour véhicules électriques à pile à combustible, 2014.

L. Ni, D. J. Patterson, and J. L. Hudgins, High Power Current Sensorless Bidirectional Hybrid Vehicle Application, vol.27, pp.1141-1151, 2012.

G. Y. Choe, H. S. Kang, B. K. Lee, and W. Y. Lee, Design consideration of interleaved converters for fuel cell applications, IEEE Electric Machines and Drives of Inter. Conf, pp.238-243, 2007.

B. Wahdame, L. Girardot, D. Hissel, F. Harel, X. Francois et al., Impact of power converter current ripple on the durability of a fuel cell stack, IEEE International Symposium, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00503160

P. Magne, P. Liu, B. Bilgin, and A. Emadi, Investigation of impact of number of phases in interleaved dc-dc boost converter, 2015 IEEE Transp. Electrif. Conf. Expo, pp.1-6, 2015.

P. Kumar, C. , and M. Mahesh, Development of 500W Interleaved Boost dc-dc Converter using PWM ICs to drive power MOSFETs, IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), pp.1-5, 2016.

C. N. Ho, S. Pettersson, G. Escobar, L. A. Serpa, and A. Coccia, Practical design and implementation procedure of an interleaved boost converter using SIC diodes for PV applications, IEEE Trans. Power Electron, vol.27, issue.6, pp.2835-2845, 2012.

M. Kabalo, Conception et réalisation de convertisseur DC-DC pour une chaîne de traction électrique et/ou hybride, 2012.

M. Muhammad, M. Armstrong, and M. A. Elgendy, A Nonisolated Interleaved Boost Converter for High-Voltage Gain Applications, IEEE Journal of Emerging and Selected Topics in Power Electronics, vol.4, issue.2, pp.352-362, 2016.

H. Al-sheikh, O. Bennouna, G. Hoblos, and N. Moubayed, Study on power converters used in hybrid vehicles with monitoring and diagnostics techniques, 17th IEEE Mediterranean Electrotechnical Conference, pp.103-107, 2014.

A. Rufer and P. Barrade, Cours d'électronique de puissance -Conversion DC/DC

A. Davoudi, J. Jatskevich, and T. D. Rybel, Numerical state-space average-value modeling of PWM DC-DC converters operating in DCM and CCM, IEEE Transactions on Power Electronics, vol.21, issue.4, pp.1003-1012, 2006.

G. Y. Choe, B. K. Lee, J. Hur, and D. W. Yoo, Comparative analysis of CCM and DCM modes of interleaved boost converters for fuel cell electric vehicles, Vehicle Power and Propulsion Conference, pp.686-690, 2009.

H. L. Do, Interleaved boost converter with a singlemagnetic component, IET Power Electron, vol.4, issue.7, pp.842-849, 2011.

D. H. Kim, G. Y. Choe, and B. K. Lee, DCM Analysis and Inductance Design Method of Interleaved Boost Converters, IEEE Transactions on Power Electronics, vol.28, issue.10, pp.4700-4711, 2013.

G. R. Chandra-mouli, J. H. Schijffelen, P. Bauer, and M. Zeman, Design and Comparison of a 10-kW Interleaved Boost Converter for PV Application Using Si and SiC Devices, Journal of Emerging and Selected Topics in Power Electronics, vol.5, issue.2, pp.610-623, 2017.

A. Kolli, A. De-bernardinis, Z. Khatir, A. Gaillard, O. Béthoux et al., Partload control stategy of a 20kW SiC power converter for embedded PEMFC multi-stack architectures, IECON 2015 -41st Annual Conference of the IEEE Industrial Electronics Society, pp.4627-4632, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01271085

R. Zaitsu, Voltage Mode Boost Converter Small Signal Control Loop Analysis Using the TPS61030, 2007.

B. Bryant and M. Kazimierczuk, Small-signal duty cycle to inductor current transfer function for boost PWM DC-DC converter in continuous conduction mode, Proceedings of the International Symposium, 2004.

O. Ellabban, O. Hegazy, J. Van-mierlo, and P. Lataire, Dual loop digital control design and implementation of a DSP based high power boost converter in fuel cell electric vehicle, 12th International Conference on Optimization of Electrical and Electronic Equipment, pp.610-617, 2010.

B. Bryant and M. K. Kazimierczuk, Voltage-Loop Power-Stage Transfer Functions With MOSFET Delay for Boost PWM Converter Operating in CCM, IEEE Transactions on Industrial Electronics, vol.54, issue.1, pp.347-353, 2007.

O. Hegazy, J. Van-mierlo, and P. Lataire, Analysis, modeling, and implementation of a multidevice interleaved DC/DC converter for fuel cell hybrid electric vehicles, IEEE Trans. Power Electron, vol.27, issue.11, pp.4445-4458, 2012.

L. Dupont, Contribution à l'étude de la durée de vie des assemblages de puissance dans des environnements hautes températures et avec des cycles thermiques de grandes amplitude, 2006.

D. L. Hefner and . Blackburn, Thermal component models for electro-thermal network simulation, IEEE Transaction Components Packaging and manufactuting technology, vol.17, p.413, 1994.

D. Shin, Thermal design and evaluation Methods for heatsink, 1998.

M. Asadi and B. Arezi, Thermal design, modeling and simulation of air forced cooling heat sink for Thyristor Controlled Reactor (TCR), pp.625-631, 2011.

O. Alavi, M. Abdollah, and A. Viki, Assessment of thermal network models for estimating IGBT junction temperature of a buck converter, 8th Power Electronics, Drive Systems Technologies Conference (PEDSTC), pp.102-107, 2017.

M. Correvon, Modélisation thermique des composants de puissance, p.17

T. Kojima, Y. Yamada, Y. Nishibe, and K. Torii, Novel RC Compact Thermal Model ofHV Inverter Module for Electro-Thermal Coupling Simulation, pp.1025-1029, 2007.

H. Li, Y. Hu, S. Liu, Y. Li, X. Liao et al., An Improved Thermal Network Model of the IGBT Module for Wind Power Converters Considering the Effects of Base-Plate Solder Fatigue, IEEE Transactions on Device and Materials Reliability, vol.16, issue.4, pp.570-575, 2016.

J. Antonios, Développement de modèles et de méthodes de calculs électriques et thermiques appliqués aux onduleurs à IGBT, 2011.

A. Narjiss, Diagnostic Non-Intrusif d'une Pile à Combustible PEMFC Grâce au Convertisseur Statique, 2008.

A. Lahyani, P. Venet, G. Grellet, and P. Viverge, Failure Prediction of Electrolytic Capacitors During Operation of Switchmode Power Supply, IEEE Transactions on Power Electronics, vol.13, issue.6, pp.1199-1207, 1998.
URL : https://hal.archives-ouvertes.fr/hal-00141566

A. M. Amaral and A. J. Cardoso, On-line fault detection of aluminium electrolytic capacitors, in step-down DC-DC converters, using input current and output voltage ripple, IET Electric Power Application, vol.5, issue.3, pp.315-322, 2012.

A. Lahyani, P. Venet, G. Grellet, and P. J. Viverge, Failure Prediction of Electrolytic Capacitors During Operation of a Switchmode Power Supply, IEEE Transactions on Power Electronics, vol.13, issue.6, pp.1199-1207, 1998.
URL : https://hal.archives-ouvertes.fr/hal-00141566

A. Izadian and P. Khayyer, Application of Kalman Filters in Model-Based Fault Diagnosis of a DC-DC Boost Converter, IECON, pp.369-372, 2010.

J. Moussodji, Caractérisation et modélisation électro-thermique distribuée d'une puce IGBT -application aux effets du vieillissement de la métallisation d'émetteur, 2014.

J. Mavier, Convertisseur génériques à tolérance de panne Applications pour le domaine aéronautique, 2007.

A. Kolli, Analyse d'une architecture de puissance dédiée aux modes traction-recharge dans un véhicule électrique. Optimisation de la commande et fonctionnement en mode dégradé, 2013.

D. Guilbert, A. Gaillard, A. Mohammadi, A. N'diaye, and A. Djerdir, Investigation of the interactions between proton exchange membrane fuel cell and interleaved DC/DC boost converter in case of power switch faults, International Journal of hydrogen energy, pp.519-537, 2015.
URL : https://hal.archives-ouvertes.fr/hal-02130977

E. Velander, L. Kruse, S. Meier, A. Löfgren, T. Wiik et al., Analysis of short circuit type II and III of high voltage SiC MOSFETs with fast current source gate drive principle, IEEE 8th International Power Electronics and Motion Control Conference (IPEMC-ECCE Asia), pp.3392-3397, 2016.

G. Romano, L. Maresca, M. Riccio, V. Alessandro, G. Breglio et al., Short-circuit failure mechanism of SiC power MOSFETs, IEEE 27th International Symposium on Power Semiconductor Devices IC's (ISPSD), pp.345-348, 2015.

J. Mavier, Convertisseurs génériques à tolérance de panne Applications pour le domaine aéronautique, 2007.

Y. Song and B. Wang, Survey on reliability of power electronic systems, IEEE Transactions on Power Electronics, vol.28, issue.1, pp.591-604, 2013.

S. Yang, A. Bryant, P. Mawby, D. Xiang, L. Ran et al., An industry-based survey of reliability in power electronic converters, pp.3151-3157, 2009.

M. Shahbazi, E. Jamshidpour, P. Poure, S. Saadate, and M. Zolghadri, Open And ShortCircuit Switch Fault Diagnosis For Non-Isolated DC-DC Converters Using Field Programmable Gate Array, IEEE Transactions on Industrial Electronics, vol.60, issue.9, pp.4136-4146, 2013.

E. Jamshidpour, M. Shahbazi, P. Poure, E. Gholipour, and S. Saadate, Fault tolerant operation of single-ended non-isolated DC-DC converters under open and short-circuit switch faults, European Conference on Power Electronics and Applications (EPE), pp.1-7, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01384536

E. Jamshidpour, P. Poure, E. Gholipour, and S. Saadate, Single-Switch DC-DC Converter With Fault-Tolerant Capability Under Open-and Short-Circuit Switch Failures, IEEE Transactions on Power Electronics, vol.30, issue.5, pp.2703-2712, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01383785

E. Jamshidpour, P. Poure, and S. Saadate, Photovoltaic Systems Reliability Improvement by Real-Time FPGA-Based Switch Failure Diagnosis and Fault-Tolerant DC-DC Converter, IEEE Trans. Ind. Electron, vol.62, issue.11, pp.7247-7255, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01383952

E. Jamshidpour, P. Poure, and S. Saadate, Switch failure diagnosis based on inductor observation for boost converters, International Journal of Electronics, vol.103, pp.1498-1509, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01384196

M. Gleissner and M. Bakran, Design and Control of Fault-Tolerant Nonisolated Multiphase Multilevel DC-DC Converters for Automotive Power Systems, IEEE Transactions on industry applications, vol.52, issue.2, 2016.

T. Park and T. Kim, Novel Fault Tolerant Power Conversion System for Hybrid Electric Vehicles, Vehicle Power and Propulsion Conference, pp.1-6, 2011.

S. Ouni, J. Rodriguez, M. Shahbazi, M. Zolghadri, H. Oraee et al., A Fast and Simple Method to Detect Short Circuit Fault in Cascaded H-Bridge Multilevel Inverter, pp.866-871, 2015.

. Hong-hee-lee, T. Phan-quoc-dzung, L. M. Hoa, . Phuong-and-nguyen-xuan, and . Bac, Fault detection using ANN for four switch Three Phase Inverter fed induction motor drive, IEEE International Conference on Sustainable Energy Technologies, pp.1239-1243, 2008.

R. Picas, J. Zaragoza, J. Pou, and S. Ceballos, Reliable Modular Multilevel Converter Fault Detection with redundant voltage sensor, IEEE Transactions on Power Electronics, vol.32, issue.1, 2017.

S. Haghnazari, M. Khodabandeh, and M. R. Zolghadri, Fast fault detection method for modular multilevel converter semiconductor power switches, IET Power Electronics, vol.9, issue.2, pp.165-174, 2016.

H. Cho, S. Kwak, and S. Lee, Fault diagnosis algorithm based on switching function for boost converters, International Journal of Electronics, vol.102, issue.7, pp.1229-1243, 2015.

S. Nie, X. Pei, Y. Chen, and Y. Kang, Fault diagnosis of PWM DCDC converters based on magnetic component voltages equation, IEEE Transactions on Power Electronics, vol.29, pp.4978-4988, 2014.

X. Pei, S. Nie, and Y. Kang, Switch Short-Circuit Fault Diagnosis and Remedial Strategy for Full-Bridge DC-DC Converters, IEEE Transactions on Power Electronics, vol.30, issue.2, pp.996-1004, 2015.

H. Sheng, F. Wang, C. W. Tipton, and I. V. , A Fault Detection and Protection Scheme for Three-Level DC-DC Converters Based on Monitoring Flying Capacitor Voltage, vol.27, pp.685-697, 2012.

S. Y. Kim, K. Nam, H. S. Song, and H. G. Kim, Fault Diagnosis of a ZVS DC-DC Converter Based on DC-Link Current Pulse Shapes, vol.55, pp.1491-1494, 2008.

Y. Chen, X. Pei, S. Nie, and Y. Kang, Monitoring and Diagnosis for the DC -DC Converter Using the Magnetic Near Field Waveform, vol.58, pp.1634-1647, 2011.

I. Littelfuse, Product catalog and design guide, 2010.

T. Tanaka and M. Yamasaki, Modeling of fuses for melting time and fusing current analysis, Proc. 26th Annu. Int. Telecommun. Energy Conf, pp.671-675, 2004.

R. Huang and S. Nilsson, Fuse selection criteria for safety applications, Proc. IEEE Symp. Product Compliance Eng, pp.1-8, 2012.

J. N. Pearce and P. Newbery, Fast acting fuses for the protection of semiconductors, pp.332-338, 1970.

J. Soon and D. Lu, Design of Fuse-MOSFET Pair for Fault-Tolerant DC/DC Converters, IEEE Transactions, vol.31, issue.9, pp.6069-6074, 2016.

R. Yahyaoui, A. Gaillard, A. Bernardinis, and D. Hissel, Signal processing-based switch fault detection methods for multi-phase interleaved boost converter, 2017.

R. Yahyaoui, A. Bernardinis, A. Gaillard, and D. Hissel, Tolérance aux défauts de type court-circuit d'interrupteurs de puissance en SiC utilisés dans un convertisseur DC/DC entrelacé, 2016.

K. Park and Z. Chen, Open-Circuit Fault Detection and Tolerant Operation for a ParallelConnected SAB dc-dc Converter, Applied Power Electronics Conference and Exposition, pp.1966-1972, 2014.

E. Ribeiro, A. J. Cardoso, and C. Boccaletti, Open-Circuit Fault Diagnosis in Interleaved DC-DC Converters, IEEE Transactions on Power Electronics, vol.29, issue.6, pp.3091-3102, 2014.

X. Pei, S. Nie, Y. Chen, and Y. Kang, Open-Circuit Fault Diagnosis and Fault-Tolerant Strategies for Full-Bridge DC-DC Converters, IEEE Transactions Power Electronics, vol.27, issue.5, pp.2550-2565, 2012.