J. Poirot-crouvezier, Modélisation dynamique des phénomènes hydrauliques, thermiques et électriques dans un groupe électrogène à pile à combustible destiné à l'application automobile, 2000.

F. Nandjou, étude locale de la thermique dans les piles à combustible pour application automobile. Corrélation à la durée de vie, 2015.

M. Gerard, Etude des interactions pile/système en vue de l'optimisation d'un généra-teur pile à combustible: Interactions coeur de pile/ compresseur -Interactions coeur de pile/ convertisseur, 2010.

F. Micoud, S. Escribano, A. Convert, S. Rosini, and L. Guetaz, Local degradations induced in a pemfc stack by start-up/shut-down cycles: investigations coupling in-situ and ex-situ analyses, International Symposium on Electrocatalysis, 2018.

V. Sethuraman, J. Weidner, A. Haug, A. Motupally, and L. Protsailo, Hydrogen peroxyde formation rrate in a PEMFC anode and cathode. effect of humidity and temperature, J. Electrochem. Soc, vol.155, issue.1, pp.50-57, 2008.

X. Erler, In-situ investigation of metal nanoparticle stability during, 2012.

J. Durst, A. Lamibrac, F. Charlot, J. Dillet, L. F. Castanheira et al.,

, Degradation heterogeneities induced by repetitive start/stop events in proton exchange membrane fuel cell: Inlet vs. outlet and channel vs. land, pp.416-426, 2013.

P. Pei, Q. Chang, and T. Tang, A quick evaluating method for automotive fuel cell lifetime, Int. J. Hydrogen Energy, vol.33, pp.3829-3836, 2008.

W. Gu, P. T. Yu, R. N. Carter, R. Makharia, and H. A. Gasteiger, Modeling of Membrane-Electrode-Assembly Degradation in Proton-Exchange-Membrane Fuel Cells -Local H2 Starvation and Start-Stop Induced Carbon-Support Corrosion, pp.45-87, 2010.

L. Castanheira, Corrosion of high surface area carbon supports used in proton-exchange membrane fuel cell electrodes, 2014.
URL : https://hal.archives-ouvertes.fr/tel-01303814

J. Kurtz, H. Dinh, and G. Saur, Doe annual report -v.f.4 fuel cell technology status: Degradation, 2016.

J. Kurtz, S. Sprik, C. Ainscough, and G. Saur, Doe annual reportvii.a.1 fuel cell electric vehicle evaluation, 2016.

J. M. Morgan and R. Datta, Understanding the gas diffusion layer in proton exchange membrane fuel cells. i. how its structural characteristics affect diffusion and performance, Journal of Power Sources, vol.251, pp.269-278, 2014.

J. Healy, C. Hayden, T. Xie, K. Olson, R. Waldo et al., Aspects of the chemical degradation of pfsa ionomer used in pem fuel cells, Fuel Cells, vol.5, issue.2, pp.302-308, 2005.

M. Aoki, H. Uchida, and M. Watanabe, Decomposition mechanism of perfluorosulfonic acid electrolyte in polymer electrolyte fuel cells, Electrochemistry Communications, vol.8, issue.9, pp.1509-1513, 2006.

V. Sethuraman, J. Weidner, A. Haug, M. Pemberton, and L. Protsailo, Importance of catalyst stability vis-à-vis hydrogen peroxyde formation rates in pem fuel cell electrodes, Electrochim. Acta, vol.54, pp.5571-5582, 2009.

M. Chandesris, R. Vincent, L. Guetaz, J. Roch, D. Thoby et al., Membrane degradation in pem fuel cells: From experimental results to semi-empirical degradation laws, International Journal of Hydrogen Energy, 2017.

W. Schmittinger and A. Vahidi, A review of the main parameters influencing long-term performance and durability of pem fuel cells, Journal of Power Sources, vol.180, pp.1-14, 2008.

A. Kusoglu, A. M. Karlsson, M. H. Santare, S. Cleghorn, and W. B. Johnson, Mechanical response of fuel cell membranes subjected to a hygro-thermal cycle, Journal of Power Sources, vol.161, issue.2, pp.987-996, 2006.

A. Kusoglu, A. M. Karlsson, M. H. Santare, S. Cleghorn, and W. B. Johnson, Mechanical behavior of fuel cell membranes under humidity cycles and effect of swelling anisotropy on the fatigue stresses, Journal of Power Sources, vol.170, issue.2, pp.345-358, 2007.

R. Solasi, Y. Zou, X. Huang, K. Reifsnider, and D. Condit, On mechanical behavior and in-plane modeling of constrained pem fuel cell membranes subjected to hydration and temperature cycles, Journal of Power Sources, vol.167, issue.2, pp.366-377, 2007.

K. Panha, M. Fowler, X. Yuan, and H. Wang, Accelerated durability testing via reactants relative humidity cycling on pem fuel cells, Applied Energy, vol.93, pp.90-97, 2012.

S. F. Burlatsky, M. Gummalla, J. O'neill, V. V. Atrazhev, A. N. Varyukhin et al., A mathematical model for predicting the life of polymer electrolyte fuel cell membranes subjected to hydration cycling, Journal of Power Sources, vol.215, pp.135-144, 2012.

C. Lim, L. Ghassemzadeh, F. Van-hove, M. Lauritzen, J. Kolodziej et al., Membrane degradation during combined chemical and mechanical accelerated stress testing of polymer electrolyte fuel cells, J. Power Sources, vol.257, issue.0, pp.102-110, 2014.

M. H. Ramin, E. Khorasany, G. G. Kjeang, R. K. Wang, and . Rajapakse, Simulation of ionomer membrane fatigue under mechanical and hygrothermal loading conditions, 9th International Conference on Lead-Acid Batteries -LABAT, vol.279, pp.55-63, 2014.

L. Dubau, L. Castanheira, F. Maillard, M. Chatenet, O. Lottin et al., A review of pem fuel cell durability: materials degradation, local heterogeneities of aging and possible mitigation strategies, WIREs Energy Environ, vol.3, pp.540-560, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01418285

S. Zhang, X. Yuan, J. Ng-cheng-hin, H. Wang, J. Wu et al., Effects of open-circuit operation on membrane and catalyst layer degradation in proton exchange membrane fuel cells, Journal of Power Sources, vol.195, issue.4, pp.1142-1148, 2010.

S. Vengatesan, M. W. Fowler, X. Yuan, and H. Wang, Diagnosis of mea degradation under accelerated relative humidity cycling, Journal of Power Sources, vol.196, issue.11, pp.5045-5052, 2011.

G. Demoor, C. Bas, E. Charvin, N. Moukheiber, F. Niepceron et al., Understanding membrane failure in pemfc: Comparison of diagnostic tools at different observation scales, Fuel Cells, vol.12, issue.3, pp.356-364, 2012.

E. Guilminot, A. Corcella, F. Charlot, F. Maillard, and M. Chatenet, Detection of pt z+ ions and pt nanoparticles inside the membrane of a used pemfc, Journal of The Electrochemical Society, vol.154, issue.1, pp.96-105, 2007.

C. Galeano, J. C. Meier, V. Peinecke, H. Bongard, I. Katsounaros et al., Toward highly stable electrocatalysts via nanoparticle pore confinement, Journal of the American Chemical Society, vol.134, issue.50, p.23190415, 2012.

R. Borup and J. Meyers, Scientific aspects of polymer electrolyte fuel cell durability and degradation, Chemical Review, vol.107, pp.3904-3951, 2007.

Y. Shao-horn, W. C. Sheng, S. Chen, J. P. Ferreira, E. F. Holby et al., Instability of supported platinum nanoparticles in low-temperature fuel cells, Top Catal, 2007.

W. Sheng, S. Chen, E. Vescovo, and Y. Shao-horn, Size influence on the oxygen reduction reaction activity and instability of supported pt nanoparticles, Journal of The Electrochemical Society, vol.159, issue.2, pp.96-103, 2011.

A. A. Topalov, I. Katsounaros, M. Auinger, S. Cherevko, and J. C. ,

S. O. Meier, K. J. Klemm, and . Mayrhofer, Dissolution of platinum: Limits for the deployment of electrochemical energy conversion?, Angewandte Chemie International Edition, vol.51, issue.50, pp.12613-12615, 2012.

B. E. Conway, Electrochemical oxide film formation at noble metals as a surface-chemical process, Progress in Surface Science, vol.49, issue.4, pp.331-452, 1995.

D. C. Johnson, D. T. Napp, and S. Bruckenstein, A ring-disk electrode study of the current/potential behaviour of platinum in 1.0 m sulphuric and 0.1 m perchloric acids. Electrochimica Acta, vol.15, pp.1493-1509, 1970.

V. I. Birss, M. Chang, and J. Segal, Platinum oxide film formation-reduction: an insitu mass measurement study, An International Journal Devoted to all Aspects of Electrode Kinetics, vol.355, issue.1, pp.181-191, 1993.

G. Steven, W. Rinaldo, J. Lee, M. Stumper, and . Eikerling, Model-and theory-based evaluation of pt dissolution for supported pt nanoparticle distributions under potential cycling, Electrochemical and Solid-State Letters, vol.14, issue.5, pp.47-49, 2011.

A. Baldan, Progress in ostwald ripening theories and their applications to nickel-base superalloys, Journal of materials science, vol.37, pp.2171-2202, 2002.

K. Rajesh, S. Ahluwalia, X. Arisetty, X. Wang, R. Wang et al., Thermodynamics and kinetics of platinum dissolution from carbon-supported electrocatalysts in aqueous media under potentiostatic and potentiodynamic conditions, Journal of The Electrochemical Society, vol.160, issue.4, pp.447-455, 2013.

Z. Zhao, L. Dubau, and F. Maillard, Evidences of the migration of pt crystallites on high surface area carbon supports in the presence of reducing molecules, Journal of Power Sources, vol.217, pp.449-458, 2012.

H. Binder, A. Kohling, K. Richter, and G. Sandstede, Uber die anodische oxydation von aktivkohlen in wassrigen elektrolyten, Electrochimica Acta, vol.9, issue.3, pp.255-274, 1964.

K. Kinoshita, J. T. Lundquist, and P. Stonehart, Potential cycling effects on platinum electrocatalyst surfaces, Journal of Electroanalytical Chemistry and Interfacial Electrochemistry, vol.48, issue.2, pp.157-166, 1973.

K. Kinoshita and J. A. Bett, Potentiodynamic analysis of surface oxides on carbon blacks, Carbon, vol.11, issue.4, pp.403-411, 1973.

K. Kinoshita and J. A. Bett, Determination of carbon surface oxides on platinumcatalyzed carbon, Carbon, vol.12, issue.5, pp.525-533, 1974.

K. Kinoshita and J. A. Bett, Influence of electrochemical treatment in phosphoric acid on the wettability of carbons, Carbon, vol.13, issue.5, pp.405-409, 1975.

K. H. Kangasniemi, D. A. Condit, and T. D. Jarvi, Characterization of vulcan electrochemically oxidized under simulated pem fuel cell conditions, Journal of the Electrochemical Society, vol.151, issue.4, pp.125-132, 2004.

L. M. Roen, C. H. Paik, and T. D. Jarvi, Electrocatalytic corrosion of carbon support in pemfc cathodes, Electrochemical and Solid-State Letters, vol.7, issue.1, pp.19-22, 2004.

K. K. Kinoshita, kinoshita: Carbon, electrochemical and physical properties, john wiley + sons, chichester, new york, brisbane, toronto 1988. 533 seiten. Berichte der Bunsengesellschaft fÃOEr physikalische Chemie, vol.92, pp.1060-1060, 1988.

J. Willsau and J. Heitbaum, The influence of pt-activation on the corrosion of carbon in gas diffusion electrodes-a dems study, Journal of Electroanalytical Chemistry and Interfacial Electrochemistry, vol.161, issue.1, pp.93-101, 1984.

O. V. Cherstiouk, A. N. Simonov, N. S. Moseva, S. V. Cherepanova, P. A. Simonov et al., Microstructure effects on the electrochemical corrosion of carbon materials and carbon-supported pt catalysts, Electrochimica Acta, vol.55, issue.28, pp.8453-8460, 2010.

R. Makharia, S. Kocha, P. Yu, M. A. Sweikart, W. Gu et al., Durable pem fuel cell electrode materials: Requirements and benchmarking methodologies, ECS Transactions, vol.1, issue.8, pp.3-18, 2006.

S. C. Ball, S. L. Hudson, D. Thompsett, and B. Theobald, An investigation into factors affecting the stability of carbons and carbon supported platinum and platinum/cobalt alloy catalysts during 1.2 v potentiostatic hold regimes at a range of temperatures, Journal of Power Sources, vol.171, issue.1, pp.18-25, 2007.

K. Artyushkova, S. Pylypenko, M. Dowlapalli, and P. Atanassov, Structure-to-property relationships in fuel cell catalyst supports: Correlation of surface chemistry and morphology with oxidation resistance of carbon blacks, Journal of Power Sources, vol.214, pp.303-313, 2012.

M. F. Mathias, . Makhariar, H. A. Gasteiger, J. J. Conley, T. J. Fuller et al., Two fuel cell cars in every garage?, The Electrochemical Society Interface, pp.14-17, 2005.

S. Maass, F. Finsterwalder, G. Frank, R. Hartmann, and C. Merten, Carbon support oxidation in pem fuel cell cathodes, Journal of Power Sources, vol.176, pp.444-451, 2008.

E. Passalacqua, P. L. Antonucci, M. Vivaldi, A. Patti, V. Antonucci et al., The influence of pt on the electrooxidation behaviour of carbon in phosphoric acid, Electrochimica Acta, vol.37, issue.15, pp.2725-2730, 1992.

W. Li and A. M. Lane, Investigation of pt catalytic effects on carbon support corrosion of the cathode catalyst in pem fuel cells using dems spectra, Electrochemistry Communications, vol.11, issue.6, pp.1187-1190, 2009.

N. Linse, L. Gubler, G. G. Scherer, and A. Wokaun, The effect of platinum on carbon corrosion behavior in polymer electrolyte fuel cells, Electrochimica Acta, vol.56, issue.22, pp.7541-7549, 2011.

F. Maillard, A. Bonnefont, and F. Micoud, An ec-ftir study on the catalytic role of pt in carbon corrosion, Electrochemistry Communications, vol.13, issue.10, pp.1109-1111, 2011.

P. L. Antonucci, L. Pino, N. Giordano, and G. Pinna, A comparative analysis of structural and surface effects in the electrochemical corrosion of carbons, Materials Chemistry and Physics, vol.21, issue.5, pp.495-506, 1989.

L. Dubau, M. Lopez-haro, L. Castanheira, J. Durst, M. Chatenet et al., Probing the structure, the composition and the orr activity of pt3co/c nanocrystallites during a 3422h pemfc ageing test, Applied Catalysis B: Environmental, pp.801-808, 2013.

P. J. Ferreira, G. J. , O. , Y. Shao-horn, D. Morgan et al., Instability of pt/c electrocatalysts in proton exchange membrane fuel cells, Journal of The Electrochemical Society, vol.152, pp.2256-2271, 2005.

J. Xie, D. L. Wood, D. M. Iii, T. A. Wayne, P. Zawodzinski et al., Durability of pefcs at high humidity conditions, J. Electrochem. Soc, vol.152, issue.1, pp.104-113, 2005.

M. Chatenet, E. Guilminot, C. Iojoiu, J. Sanchez, E. Rossinot et al., Pt redistribution within pemfc meas and its consequence on their performances, ECS Transactions, vol.11, issue.1, pp.1203-1214, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00386331

H. Schulenburg, B. Schwanitz, N. Linse, G. Gãoenther, A. Scherer et al., 3d imaging of catalyst support corrosion in polymer electrolyte fuel cells, The Journal of Physical Chemistry C, vol.115, issue.29, pp.14236-14243, 2011.

N. Macauley, D. D. Papadias, J. Fairweather, D. Spernjak, D. Langlois et al., Carbon corrosion in pem fuel cells and the development of accelerated stress tests, Journal of The Electrochemical Society, vol.165, issue.6, pp.3148-3160, 2018.

M. Secanell, A. Putz, P. Wardlaw, V. Zingan, M. Bhaiya et al., Openfcst: An open-source mathematical modelling software for polymer electrolyte fuel cells, ECS Transactions, vol.64, issue.3, pp.655-680, 2014.

K. Nagumo and M. Inoue, Numerical prediction of water content distribution of catalyst coated membrane of fuel cell stack using simulation, 2016.

M. Yoneda, Y. Tago, K. Suzuki, M. Takimoto, and E. Ejiri, Macroscopic modeling and simulation for polymer electrolyte membrane fuel cells, ECS Transactions, vol.3, issue.1, pp.1105-1114, 2006.

B. Steven, H. Beale, J. G. Choi, H. K. Pharoah, H. Roth et al., Open-source computational model of a solid oxide fuel cell, Computer Physics Communications, vol.200, pp.15-26, 2016.

G. A. Futter, K. A. Gazdzicki, A. Friedrich, T. Latz, and . Jahnke, Physical modeling of polymer-electrolyte membrane fuel cells: Understanding water management and impedance spectra, Journal of Power Sources, vol.391, pp.148-161, 2018.

P. Schott and P. Baurens, Fuel cell operation characterization using simulation, Journal of Power Sources, vol.156, issue.1, pp.85-91, 2006.

A. A. Franco, P. Schott, C. Jallut, and B. Maschke, A multi-scale dynamic mechanistic model for the transient analysis of pefcs, Fuel Cells, vol.2, pp.99-117, 2007.
URL : https://hal.archives-ouvertes.fr/hal-02098274

A. A. Franco, S. Passot, P. Fugier, C. Anglade, E. Billy et al., Ptxcoy catalysts degradation in pefc environments: Mechanistic insights, J. Electrochem. Soc, vol.156, issue.3, pp.410-424, 2009.

K. Malek and A. A. Franco, Microstructure-based modeling of aging mechanisms in catalyst layers of polymer electrolyte fuel cells, The Journal of Physical Chemistry B, vol.115, issue.25, pp.8088-8101, 2011.

A. A. Franco, Chapter 11 -modelling and analysis of degradation phenomena in polymer electrolyte membrane fuel cells, Polymer Electrolyte Membrane and Direct Methanol Fuel Cell Technology, vol.1, pp.291-367, 2012.

C. Robin, M. Gerard, A. A. Franco, and P. Schott, Multi-scale coupling between two dynamical models for PEMFC aging prediction, International Journal of Hydrogen Energy, vol.38, issue.11, pp.4675-4688, 2013.

C. Robin, M. Gerard, J. Arbigny, P. Schott, L. Jabbour et al., Development and experimental validation of a PEM fuel cell 2d-model to study heterogeneities effects along large-area cell surface, Int. J. Hydrogen Energy, vol.40, issue.32, pp.10211-10230, 2015.

B. Randrianarizafy, P. Schott, M. Chandesris, M. Gerard, and Y. Bultel, Design optimization of rib/channel patterns in a pemfc through performance heterogeneities modelling, International Journal of Hydrogen Energy, vol.43, issue.18, pp.8907-8926, 2018.

H. Brenner, Navier-stokes revisited, Physica A: Statistical Mechanics and its Applications, vol.349, issue.1-2, pp.60-132, 2005.

J. Maxwell, On the dynamical theory of gases, Philosophical Transactions of the Royal Society of London, vol.157, pp.49-88, 1867.

J. Stefan, Über das Gleichgewicht und Bewegung, insbesondere die Diffusion von Gemischen, Sitzungsberichte der Kaiserlichen Akademie der Wissenschaften Wien, vol.63, pp.63-124, 1871.

J. B. Young and B. Todd, Modelling of multi-component gas flows in capillaries and porous solids, International Journal of Heat and Mass Transfer, vol.48, pp.5338-5353, 2005.

H. Darcy, Les fontaines publiques de la ville de Dijon, vol.49, 1856.

M. Knudsen, Die Gesetze der Molekularströmung und der inneren Reibungsströmung der Gase durch Röhren, Annalen der Physik, vol.333, issue.1, pp.75-130, 1909.

W. G. Pollard and R. D. Present, On gaseous self-diffusion in long capillary tubes, Phys. Rev, vol.73, pp.762-774, 1948.

F. Meier and G. Eigenberger, Transport parameters for the modelling of water transport in ionomer membranes for PEM-fuel cells, Electrochimica Acta, vol.49, issue.11, pp.1731-1742, 2004.

A. A. Franco, Un modèle physique multiéchelle de la dynamique électrochimique dans une pile à combustible à électrolyte polymère, 2005.

S. Passot, Etude expérimentale et par modélisation de l'impact d'impuretés de l'hydrogène sur le fonctionnement des piles à combustible à membrane échangeuse de protons (PEMFC), 2012.

T. E. Springer, T. A. Zawodzinski, and S. Gottesfeld, Polymer electrolyte fuel cell model, Journal of The Electrochemical Society, vol.138, issue.8, pp.2334-2342, 1991.

J. Besson, Précis de thermodynamique et cinétique électrochimiques. Ellipses (Paris), 1984.

J. Markku, M. Lampinen, and . Fomino, Analysis of free energy and entropy changes for half-cell reactions, Journal of The Electrochemical Society, vol.140, issue.12, pp.3537-3546, 1993.

G. Lin and T. Van-nguyen, A two-dimensional two-phase model of a PEM fuel cell, Journal of The Electrochemical Society, vol.153, issue.2, pp.372-382, 2006.

R. Coulon, W. G. Bessler, and A. Franco, Modeling chemical degradation of a polymer electrolyte membrane and its impact on fuel cell performance, ECS Trans, vol.25, p.259, 2010.

T. A. Zawodzinski, M. Neeman, L. O. Sillerud, and S. Gottesfeld, Determination of water diffusion coefficients in perfluorosulfonate ionomeric membranes

, J. Phys. Chem, vol.95, issue.15, pp.6040-6044, 1991.

R. B. Bird, W. E. Stewart, and E. N. Lightfoot, Transport Phenomena, 2007.

J. R. Davis and A. S. Committee, Stainless Steels. ASM specialty handbook, 1994.

G. Steven, J. F. Chalk, and . Miller, Key challenges and recent progress in batteries, fuel cells, and hydrogen storage for clean energy systems, Special issue including selected papers from the 3rd International Conference on Materials for Advanced Technologies (ICMAT 2005, vol.159, pp.73-80, 2006.

M. Piffard, M. Gerard, R. D. Fonseca, P. Massioni, and E. Bideaux, Sliding mode observer for proton exchange membrane fuel cell: automotive application, Journal of Power Sources, vol.388, pp.71-77, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01740933

N. Yousfi-steiner, P. Mocoteguy, D. Candusso, and D. Hissel, A review on polymer electrolyte membrane fuel cell catalyst degradation and starvation issues: Causes, consequences and diagnostic for mitigation, Journal of Power Sources, vol.194, pp.130-145, 2009.

P. Pei and H. Chen, Main factors affecting the lifetime of proton exchange membrane fuel cells in vehicle applications: A review, Applied Energy, vol.125, pp.60-75, 2014.

C. A. Reiser, L. Bregoli, T. W. Patterson, J. S. Yi, J. Yang et al., A reverse-current decay mechanism for fuel cells, Electrochemical and Solid-State Letters, vol.8, issue.6, pp.273-276, 2005.

Q. Shen, M. Hou, D. Liang, Z. Zhou, X. Li et al., Study on the processes of start-up and shutdown in proton exchange membrane fuel cells, Journal of Power Sources, vol.189, issue.2, pp.1114-1119, 2009.

J. P. Meyers and R. M. Darling, Model of carbon corrosion in PEM fuel cells, J. Electrochem. Soc, vol.153, issue.8, pp.1432-1442, 2006.

J. H. Ohs, U. Sauter, S. Maass, and D. Stolten, Modeling hydrogen starvation conditions in proton-exchange membrane fuel cells, Journal of Power Sources, vol.196, issue.1, pp.255-263, 2011.

G. Maranzana, A. Lamibrac, J. Dillet, S. Abbou, S. Didierjean et al., Startup (and shutdown) model for polymer electrolyte membrane fuel cells, Journal of The Electrochemical Society, vol.162, issue.7, pp.694-706, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01417570

A. Lamibrac, G. Maranzana, O. Lottin, J. Dillet, J. Mainka et al., Experimental characterization of internal currents during the start-up of a proton exchange membrane fuel cell, Journal of Power Sources, vol.196, issue.22, pp.9451-9458, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01567998

I. A. Schneider and S. Von-dahlen, Start-stop phenomena in channel and land areas of a polymer electrolyte fuel cell, Electrochemical and Solid-State Letters, vol.14, issue.2, pp.30-33, 2011.

S. Kreitmeier, A. Wokaun, and F. N. Buchi, Local catalyst support degradation during polymer electrolyte fuel cell start-up and shutdown, Journal of The Electrochemical Society, vol.159, issue.11, pp.787-793, 2012.
DOI : 10.1149/2.019212jes

S. Abbou, J. Dillet, D. Spernjak, R. Mukundan, J. D. Fairweather et al., Time evolution of local potentials during pem fuel cell operation with dead-ended anode, ECS Transactions, vol.58, issue.1, pp.1631-1642, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01431050

J. Dillet, D. Spernjak, A. Lamibrac, G. Maranzana, R. Mukundan et al., Impact of flow rates and electrode specifications on degradations during repeated startups and shutdowns in polymer-electrolyte membrane fuel cells, Journal of Power Sources, vol.250, pp.68-79, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01418291

E. Brightman and G. Hinds, In situ mapping of potential transients during start-up and shut-down of a polymer electrolyte membrane fuel cell, Journal of Power Sources, vol.267, pp.160-170, 2014.

T. F. Fuller and G. Gray, Carbon corrosion induced by partial hydrogen coverage, ECS Transactions, vol.8, issue.1, pp.345-353, 2006.
DOI : 10.1149/1.2214567

W. Gu, R. N. Carter, P. T. Yu, and H. A. Gasteiger, Start/stop and local h2 starvation mechanisms of carbon corrosion: Model vs. experiment, ECS Transactions, vol.11, issue.1, pp.963-973, 2007.

K. Jain, A. Gidwani, S. Kumar, and J. V. Cole, Cfd study of carbon corrosion in pem fuel cells, ECS Transactions, vol.16, issue.2, pp.1323-1333, 2008.

A. A. Franco, M. Gerard, M. Guinard, B. Barthe, and O. Lemaire, Carbon catalyst-support corrosion in polymer electrolyte fuel cells: Mechanistic insights, ECS Transactions, vol.13, issue.15, p.35, 2008.

G. Maranzana, C. Moyne, J. Dillet, S. Didierjean, and O. Lottin, About internal currents during start-up in proton exchange membrane fuel cell, 4th International Conference on Polymer Batteries and Fuel Cells, vol.195, pp.5990-5995, 2010.

H. Imai, K. Izumi, M. Matsumoto, Y. Kubo, K. Kato et al., In situ and real-time monitoring of oxide growth in a few monolayers at surfaces of platinum nanoparticles in aqueous media, Journal of the American Chemical Society, vol.131, issue.17, pp.6293-6300, 2009.

K. Sasaki, N. Marinkovic, H. S. Isaacs, and R. R. Adzic, Synchrotronbased in situ characterization of carbon-supported platinum and platinum monolayer electrocatalysts, ACS Catalysis, vol.6, issue.1, pp.69-76, 2016.

T. Zhang, P. Wang, H. Chen, and P. Pei, A review of automotive proton exchange membrane fuel cell degradation under start-stop operating condition, Applied Energy, vol.223, pp.249-262, 2018.

Y. Yu, Z. Tu, H. Zhang, Z. Zhan, and M. Pan, Comparison of degradation behaviors for open-ended and closed proton exchange membrane fuel cells during startup and shutdown cycles, Journal of Power Sources, vol.196, issue.11, pp.5077-5083, 2011.

H. Yano, T. Akiyama, P. Bele, H. Uchida, and M. Watanabe, Durability of pt/graphitized carbon catalysts for the oxygen reduction reaction prepared by the nanocapsule method, Phys. Chem. Chem. Phys, vol.12, pp.3806-3814, 2010.

C. Reiser, D. Yang, and R. Sawyer, Procedure for starting up a fuel cell system using a fuel purge, 2008.

A. Ofstad, J. Davey, S. Sunde, and R. L. Borup, Carbon corrosion of a pemfc during shut-down/start-up when using an air purge procedure, ECS Transactions, vol.16, issue.2, pp.1301-1311, 2008.

J. H. Kim, E. A. Cho, J. H. Jang, H. Kim, T. Lim et al., Development of a durable pemfc startup process by applying a dummy load: I. electrochemical study, Journal of The Electrochemical Society, vol.156, issue.8, pp.955-961, 2009.

J. Yoo-yeon, E. A. Cho, J. H. Kim, T. Lim, I. Oh et al., Effects of a hydrogen and air supply procedure on the performance degradation of pemfcs, International Journal of Hydrogen Energy, vol.35, issue.23, pp.13118-13124, 2009.

K. Eom, G. Kim, E. Cho, J. H. Jang, H. Kim et al., Effects of pt loading in the anode on the durability of a membrane electrode assembly for polymer electrolyte membrane fuel cells during startup/shutdown cycling, International Journal of Hydrogen Energy, vol.37, issue.23, pp.18455-18462, 2012.

T. Asset, R. Chattot, J. Drnec, P. Bordet, and N. Job, Elucidating the mechanisms driving the aging of porous hollow ptni/c nanoparticles by means of coads stripping, ACS Applied Materials & Interfaces, vol.9, issue.30, p.28649841, 2017.

H. Schmies, A. Bergmann, J. Drnec, G. Wang, D. Teschner et al., Unravelling degradation pathways of oxide-supported pt fuel cell nanocatalysts under in situ operating conditions, Advanced Energy Materials, vol.8, issue.4, p.1701663