A. Adebayo, Characterisation of Integrated WAAM and Machining Processes, 2013.

G. Allaire, F. Jouve, and A. Toader, Structural optimization using sensitivity analysis and a level-set method, Journal of computational physics, vol.194, pp.363-393, 2004.
DOI : 10.1016/j.jcp.2003.09.032

J. Allen, An Investigation into the Comparative Costs of Additive Manufacture vs. Machine from Solid for Aero Engine Parts, Cost Effective Manufacture via Net-Shape Processing, pp.17-18, 2006.

P. M. Almeida, Process control and development in wire and arc addictive manufacturing, 2012.

A. Anca, A. Cardona, J. Risso, and V. D. Fachinotti, Finite element modeling of welding processes, Applied Mathematical Modelling, vol.35, issue.2, pp.688-707, 2011.

A. H. Azman, Method for integration of lattice structures in design for additive manufacturing Method for integration of lattice structures in design for additive manufacturing pour l ' int egration lis dans la conception pour la fabrication addi, 2017.

R. Baker, Method of Making Decorative Articles, 1925.

K. Y. Benyounis and A. G. Olabi, Optimization of different welding processes using statistical and numerical approaches -A reference guide, Advances in Engineering Software, vol.39, pp.483-496, 2008.

F. Bonaccorso, L. Cantelli, and G. Muscato, An Arc Welding Robot Control for a Shaped Metal Deposition Plant : Modular Software Interface and Sensors, IEEE Transactions on Industrial Electronics, vol.58, issue.8, pp.3126-3132, 2011.
DOI : 10.1109/tie.2011.2114311

F. Bos, R. Wolfs, Z. Ahmed, and T. Salet, Additive manufacturing of concrete in construction : potentials and challenges of 3D concrete printing, Virtual and Physical Prototyping, vol.11, issue.3, pp.209-225, 2016.

N. Boyard, Méthodologie de conception pour la réalisation de pièces en Fabrication Additive, Ecole nationale supérieure d'arts et métiers-ENSAM, 2015.

G. Bradski and A. Kaehler, Learning OpenCV, 2008.

J. Chapuis, Une approche pour l'optimisation des opérations de soudage à l'arc, 2011.

J. Chapuis, E. Romero, C. Bordreuil, F. Soulié, and G. Fras, Comportement d'une macro-goutte stationnaire en GMAW pulsée, MATERIAUX 2010, p.12, 2010.

Z. Chen, D. Li, B. Lu, Y. Tang, M. Sun et al., Fabrication of artificial bioactive bone using rapid prototyping, Rapid Prototyping Journal, vol.10, issue.5, pp.327-333, 2004.
DOI : 10.1108/13552540410562368

P. M. Dickens, M. S. Pridham, R. C. Cobb, I. Gibson, and G. Dixon, Rapid Prototyping Using 3-D Welding, Proceedings of the 3rd Symposium on Solid Freeform Fabrication, pp.280-290, 1992.

J. Ding, Thermo-mechanical Analysis of Wire and Arc Additive Manufacturing Process, 2012.

Y. Ding, J. Warton, and R. Kovacevic, Development of sensing and control system for robotized laser-based direct metal addition system, Additive Manufacturing, vol.10, pp.24-35, 2016.

A. Diourte, Gestion du dépôt de matière lors de la fabrication additive de structures filaires avec un procédé de soudage à l'arc. Master's thesis, 2017.

P. Dubois, A. Aoussat, and R. Duchamp, Prototypage rapide, généralités. Techniques de l'Ingénieur, 2000.

M. Eichenhofer, C. H. Joanna, P. Wong, and . Ermanni, Continuous lattice fabrication of ultra-lightweight composite structures, Additive Manufacturing, vol.18, pp.48-57, 2017.

F. Mitjana, Optimisation topologique de structures sous contraintes de flambage, 2018.
URL : https://hal.archives-ouvertes.fr/tel-02063761

F. Gao, Molten Microdrop Deposition and Solidification Processes, 1994.

A. Herali?, A. Christiansson, and B. Lennartson, Height control of laser metal-wire deposition based on iterative learning control and 3D scanning, Optics and Lasers in Engineering, vol.50, issue.9, pp.1230-1241, 2012.

D. Hu and R. Kovacevic, Sensing, modeling and control for laser-based additive manufacturing, International Journal of Machine Tools and Manufacture, vol.43, issue.1, pp.51-60, 2003.

I. A. Ibrahim, S. A. Mohamat, A. Amir, and A. Ghalib, The Effect of Gas Metal Arc Welding (GMAW) Processes on Different Welding Parameters. Procedia Engineering, vol.41, pp.1502-1506, 2012.

M. Iravani-tabrizipour and E. Toyserkani, An image-based feature tracking algorithm for real-time measurement of clad height. Machine Vision and Applications, vol.18, pp.343-354, 2007.

E. Karadeniz, U. Ozsarac, and C. Yildiz, The effect of process parameters on penetration in gas metal arc welding processes, Materials & Design, vol.28, pp.649-656, 2007.

K. P. Karunakaran, A. Bernard, S. Suryakumar, L. Dembinski, and G. Taillandier, Rapid manufacturing of metallic objects, Rapid Prototyping Journal, vol.4, pp.264-280, 2011.

K. P. Karunakaran, P. Vivekananda-shanmuganathan, S. J. Jadhav, P. Bhadauria, and A. Pandey, Rapid prototyping of metallic parts and moulds, Journal of materials processing technology, vol.105, pp.371-381, 2000.

I. S. Kim, J. S. Son, I. G. Kim, J. Y. Kim, and O. S. Kim, A study on relationship between process variables and bead penetration for robotic CO 2 arc welding, Journal of Materials Processing Technology, vol.136, pp.139-145, 2003.

F. Laverne, P. Dubois, and F. Segonds, Fabrication additive -Principes gé-néraux. Techniques de l'ingénieur, vol.7017, 2016.

Y. Li, H. Zhang, R. Hu, and J. Xu, Development of a steel rapid prototyping system based on TIG welding deposition technology, IEEE International Symposium on Knowledge Acquisition and Modeling Workshop Proceedings, pp.154-157, 2008.

Y. Marchives, Development of 3D filter made by stereolithography, 2017.
URL : https://hal.archives-ouvertes.fr/tel-01482287

J. Mazumder, D. Dutta, N. Kikuchi, and A. Ghosh, Closed loop direct metal deposition : art to part, Optics and Lasers in Engineering, vol.34, issue.4, pp.397-414, 2000.

R. Monier, Étude expérimentale du comportement dynamique des phases liquides en soudage par court-circuit contrôlé, 2017.

S. Mueller, S. Im, S. Gurevich, A. Teibrich, L. Pfisterer et al., WirePrint : 3D printed previews for fast prototyping. UIST '14 : Proceedings of the 27th annual ACM symposium on User interface software and technology, pp.273-280, 2014.

K. Muita, M. Westerlund, and R. Rajala, The evolution of rapid production : How to adopt novel manufacturing technology, IFAC-PapersOnLine, vol.28, issue.3, pp.32-37, 2015.

, Entreprise mx3d, web : mx3d.com, mail : info@mx3d.com, 2018.

L. Nickels, AM and aerospace : An ideal combination, Metal Powder Report, vol.70, issue.6, pp.300-303, 2015.

G. Reinhart and S. Teufelhart, Optimization of mechanical loaded lattice structures by orientating their struts along the flux of force, Procedia CIRP, vol.12, pp.175-180, 2013.

F. Ribeiro, 3D Printing With Metals. Computing & Control Engineering, vol.9, 1998.

Y. Song and S. Park, Experimental investigations into rapid prototyping of composites by novel hybrid deposition process, Journal of Materials Processing Technology, vol.171, pp.35-40, 2006.

S. Suryakumar, K. P. Karunakaran, A. Bernard, U. Chandrasekhar, N. Raghavender et al., Weld bead modeling and process optimization in Hybrid Layered Manufacturing, Computer-Aided Design, vol.43, issue.4, pp.331-344, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00661324

E. Toyserkani and A. Khajepour, A mechatronics approach to laser powder deposition process, Mechatronics, vol.16, issue.10, pp.631-641, 2006.

A. Uriondo and D. Pozo, Development of a Qualification Procedure, and Quality Assurance and Quality Control Concepts and Procedures for Reparing and Reproducing Parts With Additive Manufacturing in Mro Processes, 2015.

O. Weeger, Y. S. Kang, S. Yeung, and M. L. Dunn, Optimal Design and Manufacture of Active Rod Structures with Spatially Variable Materials. 3D Printing and Additive Manufacturing, vol.3, pp.204-215, 2016.

J. Xiong, Z. Yin, and W. Zhang, Closed-loop control of variable layer width for thin-walled parts in wire and arc additive manufacturing, Journal of Materials Processing Technology, vol.233, pp.100-106, 2016.

J. Xu, H. Zhang, G. Zhang, Y. Li, and R. Hu, The choice of welding parameters and prediction of weld seam dimensions for welding rapid prototyping, 2008.

X. Yan and P. Gu, A review of rapid prototyping technologies and systems, Computer-Aided Design, vol.28, issue.4, pp.307-318, 1996.

B. Zhang, Fusion sélective par laser-influence de l'atmosphère et réalisa-tion d'alliage in situ, 2013.

H. Zhang, X. Wang, G. Wang, and Y. Zhang, Hybrid direct manufacturing method of metallic parts using deposition and micro continuous rolling, Rapid Prototyping Journal, vol.6, pp.387-394, 2012.

Y. M. Zhang, P. Li, Y. Chen, and A. T. Male, Automated system for weldingbased rapid prototyping, Mechatronics, vol.12, issue.1, pp.37-53, 2002.